]> git.ipfire.org Git - people/ms/u-boot.git/commitdiff
driver: net: fsl-mc: Add DPAA2 commands to manage MC
authorPrabhakar Kushwaha <prabhakar@freescale.com>
Wed, 4 Nov 2015 06:55:58 +0000 (12:25 +0530)
committerYork Sun <yorksun@freescale.com>
Mon, 30 Nov 2015 16:53:03 +0000 (08:53 -0800)
Management complex Firmware, DPL and DPC are depolyed during u-boot boot
sequence.

Add new DPAA2 commands to manage Management Complex (MC) i.e. start mc, aiop
and apply DPL from u-boot command prompt.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
arch/arm/cpu/armv8/fsl-layerscape/README.lsch3
drivers/net/fsl-mc/mc.c
include/configs/ls2085aqds.h
include/configs/ls2085ardb.h
include/fsl-mc/fsl_mc.h
include/fsl-mc/fsl_mc_private.h

index 03e18f6573734fcc6461a1713297b2dd33100e7e..417cf6dc24e8945a55281505d54e7436700ee8e1 100644 (file)
@@ -242,3 +242,64 @@ MMU Translation Tables
                           | 0x81_0000_0000 |        | 0x08_0080_0000 |
                           ------------------        ------------------
                                 ...                       ...
+
+
+DPAA2 commands to manage Management Complex (MC)
+------------------------------------------------
+DPAA2 commands has been introduced to manage Management Complex
+(MC). These commands are used to start mc, aiop and apply DPL
+from u-boot command prompt.
+
+Please note Management complex Firmware(MC), DPL and DPC are no
+more deployed during u-boot boot-sequence.
+
+Commands:
+a) fsl_mc start mc <FW_addr> <DPC_addr> - Start Management Complex
+b) fsl_mc apply DPL <DPL_addr> - Apply DPL file
+c) fsl_mc start aiop <FW_addr> - Start AIOP
+
+How to use commands :-
+1. Command sequence for u-boot ethernet:
+   a) fsl_mc start mc <FW_addr> <DPC_addr> - Start Management Complex
+   b) DPMAC net-devices are now available for use
+
+   Example-
+       Assumption: MC firmware, DPL and DPC dtb is already programmed
+       on NOR flash.
+
+       => fsl_mc start mc 580300000 580800000
+       => setenv ethact DPMAC1@xgmii
+       => ping $serverip
+
+2. Command sequence for Linux boot:
+   a) fsl_mc start mc <FW_addr> <DPC_addr> - Start Management Complex
+   b) fsl_mc apply DPL <DPL_addr> - Apply DPL file
+   c) No DPMAC net-devices are available for use in u-boot
+   d) boot Linux
+
+   Example-
+       Assumption: MC firmware, DPL and DPC dtb is already programmed
+       on NOR flash.
+
+       => fsl_mc start mc 580300000 580800000
+       => setenv ethact DPMAC1@xgmii
+       => tftp a0000000 kernel.itb
+       => fsl_mc apply dpl 580700000
+       => bootm a0000000
+
+3. Command sequence for AIOP boot:
+   a) fsl_mc start mc <FW_addr> <DPC_addr> - Start Management Complex
+   b) fsl_mc start aiop <FW_addr> - Start AIOP
+   c) fsl_mc apply DPL <DPL_addr> - Apply DPL file
+   d) No DPMAC net-devices are availabe for use in u-boot
+  Please note actual AIOP start will happen during DPL parsing of
+  Management complex
+
+  Example-
+       Assumption: MC firmware, DPL, DPC dtb and AIOP firmware is already
+       programmed on NOR flash.
+
+       => fsl_mc start mc 580300000 580800000
+       => fsl_mc start aiop 0x580900000
+       => setenv ethact DPMAC1@xgmii
+       => fsl_mc apply dpl 580700000
index ea987d79ddaaa777320de7539ef68a471e0e7984..d2ca5c657c9c206b4503fb255421e8045f9a8d63 100644 (file)
@@ -14,7 +14,9 @@
 #include <fsl-mc/fsl_dpmng.h>
 #include <fsl-mc/fsl_dprc.h>
 #include <fsl-mc/fsl_dpio.h>
+#include <fsl-mc/fsl_dpni.h>
 #include <fsl-mc/fsl_qbman_portal.h>
+#include <fsl-mc/ldpaa_wriop.h>
 
 #define MC_RAM_BASE_ADDR_ALIGNMENT  (512UL * 1024 * 1024)
 #define MC_RAM_BASE_ADDR_ALIGNMENT_MASK        (~(MC_RAM_BASE_ADDR_ALIGNMENT - 1))
 #define MC_BOOT_TIMEOUT_ENV_VAR        "mcboottimeout"
 
 DECLARE_GLOBAL_DATA_PTR;
-static int mc_boot_status;
+static int mc_boot_status = -1;
+static int mc_dpl_applied = -1;
+#ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET
+static int mc_aiop_applied = -1;
+#endif
 struct fsl_mc_io *dflt_mc_io = NULL;
 uint16_t dflt_dprc_handle = 0;
 struct fsl_dpbp_obj *dflt_dpbp = NULL;
@@ -93,7 +99,8 @@ static int mc_copy_image(const char *title,
  * Returns 0 on success and a negative errno on error.
  * task fail.
  **/
-int parse_mc_firmware_fit_image(const void **raw_image_addr,
+int parse_mc_firmware_fit_image(u64 mc_fw_addr,
+                               const void **raw_image_addr,
                                size_t *raw_image_size)
 {
        int format;
@@ -103,36 +110,31 @@ int parse_mc_firmware_fit_image(const void **raw_image_addr,
        size_t size;
        const char *uname = "firmware";
 
-       /* Check if the image is in NOR flash */
-#ifdef CONFIG_SYS_LS_MC_FW_IN_NOR
-       fit_hdr = (void *)CONFIG_SYS_LS_MC_FW_ADDR;
-#else
-#error "No CONFIG_SYS_LS_MC_FW_IN_xxx defined"
-#endif
+       fit_hdr = (void *)mc_fw_addr;
 
        /* Check if Image is in FIT format */
        format = genimg_get_format(fit_hdr);
 
        if (format != IMAGE_FORMAT_FIT) {
-               printf("fsl-mc: ERROR: Bad firmware image (not a FIT image)\n");
+               printf("fsl-mc: ERR: Bad firmware image (not a FIT image)\n");
                return -EINVAL;
        }
 
        if (!fit_check_format(fit_hdr)) {
-               printf("fsl-mc: ERROR: Bad firmware image (bad FIT header)\n");
+               printf("fsl-mc: ERR: Bad firmware image (bad FIT header)\n");
                return -EINVAL;
        }
 
        node_offset = fit_image_get_node(fit_hdr, uname);
 
        if (node_offset < 0) {
-               printf("fsl-mc: ERROR: Bad firmware image (missing subimage)\n");
+               printf("fsl-mc: ERR: Bad firmware image (missing subimage)\n");
                return -ENOENT;
        }
 
        /* Verify MC firmware image */
        if (!(fit_image_verify(fit_hdr, node_offset))) {
-               printf("fsl-mc: ERROR: Bad firmware image (bad CRC)\n");
+               printf("fsl-mc: ERR: Bad firmware image (bad CRC)\n");
                return -EINVAL;
        }
 
@@ -218,7 +220,7 @@ static int mc_fixup_dpc(u64 dpc_addr)
        return 0;
 }
 
-static int load_mc_dpc(u64 mc_ram_addr, size_t mc_ram_size)
+static int load_mc_dpc(u64 mc_ram_addr, size_t mc_ram_size, u64 mc_dpc_addr)
 {
        u64 mc_dpc_offset;
 #ifndef CONFIG_SYS_LS_MC_DPC_IN_DDR
@@ -245,11 +247,7 @@ static int load_mc_dpc(u64 mc_ram_addr, size_t mc_ram_size)
        /*
         * Get address and size of the DPC blob stored in flash:
         */
-#ifdef CONFIG_SYS_LS_MC_DPC_IN_NOR
-       dpc_fdt_hdr = (void *)CONFIG_SYS_LS_MC_DPC_ADDR;
-#else
-#error "No CONFIG_SYS_LS_MC_DPC_IN_xxx defined"
-#endif
+       dpc_fdt_hdr = (void *)mc_dpc_addr;
 
        error = fdt_check_header(dpc_fdt_hdr);
        if (error != 0) {
@@ -279,7 +277,7 @@ static int load_mc_dpc(u64 mc_ram_addr, size_t mc_ram_size)
        return 0;
 }
 
-static int load_mc_dpl(u64 mc_ram_addr, size_t mc_ram_size)
+static int load_mc_dpl(u64 mc_ram_addr, size_t mc_ram_size, u64 mc_dpl_addr)
 {
        u64 mc_dpl_offset;
 #ifndef CONFIG_SYS_LS_MC_DPL_IN_DDR
@@ -306,11 +304,7 @@ static int load_mc_dpl(u64 mc_ram_addr, size_t mc_ram_size)
        /*
         * Get address and size of the DPL blob stored in flash:
         */
-#ifdef CONFIG_SYS_LS_MC_DPL_IN_NOR
-       dpl_fdt_hdr = (void *)CONFIG_SYS_LS_MC_DPL_ADDR;
-#else
-#error "No CONFIG_SYS_LS_MC_DPL_IN_xxx defined"
-#endif
+       dpl_fdt_hdr = (void *)mc_dpl_addr;
 
        error = fdt_check_header(dpl_fdt_hdr);
        if (error != 0) {
@@ -357,23 +351,33 @@ static unsigned long get_mc_boot_timeout_ms(void)
        return timeout_ms;
 }
 
-#ifdef CONFIG_SYS_LS_MC_AIOP_IMG_IN_NOR
-static int load_mc_aiop_img(u64 mc_ram_addr, size_t mc_ram_size)
+#ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET
+static int load_mc_aiop_img(u64 aiop_fw_addr)
 {
+       u64 mc_ram_addr = mc_get_dram_addr();
+#ifndef CONFIG_SYS_LS_MC_DPC_IN_DDR
        void *aiop_img;
+#endif
 
        /*
         * Load the MC AIOP image in the MC private DRAM block:
         */
 
-       aiop_img = (void *)CONFIG_SYS_LS_MC_AIOP_IMG_ADDR;
+#ifdef CONFIG_SYS_LS_MC_DPC_IN_DDR
+       printf("MC AIOP is preloaded to %#llx\n", mc_ram_addr +
+              CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET);
+#else
+       aiop_img = (void *)aiop_fw_addr;
        mc_copy_image("MC AIOP image",
                      (u64)aiop_img, CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH,
                      mc_ram_addr + CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET);
+#endif
+       mc_aiop_applied = 0;
 
        return 0;
 }
 #endif
+
 static int wait_for_mc(bool booting_mc, u32 *final_reg_gsr)
 {
        u32 reg_gsr;
@@ -420,12 +424,12 @@ static int wait_for_mc(bool booting_mc, u32 *final_reg_gsr)
        return 0;
 }
 
-int mc_init(void)
+int mc_init(u64 mc_fw_addr, u64 mc_dpc_addr)
 {
        int error = 0;
        int portal_id = 0;
        struct mc_ccsr_registers __iomem *mc_ccsr_regs = MC_CCSR_BASE_ADDR;
-       u64 mc_ram_addr;
+       u64 mc_ram_addr = mc_get_dram_addr();
        u32 reg_gsr;
        u32 reg_mcfbalr;
 #ifndef CONFIG_SYS_LS_MC_FW_IN_DDR
@@ -437,17 +441,6 @@ int mc_init(void)
        u8 mc_ram_num_256mb_blocks;
        size_t mc_ram_size = mc_get_dram_block_size();
 
-       /*
-        * The MC private DRAM block was already carved at the end of DRAM
-        * by board_init_f() using CONFIG_SYS_MEM_TOP_HIDE:
-        */
-       if (gd->bd->bi_dram[1].start) {
-               mc_ram_addr =
-                       gd->bd->bi_dram[1].start + gd->bd->bi_dram[1].size;
-       } else {
-               mc_ram_addr =
-                       gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size;
-       }
 
        error = calculate_mc_private_ram_params(mc_ram_addr,
                                                mc_ram_size,
@@ -474,7 +467,8 @@ int mc_init(void)
 #ifdef CONFIG_SYS_LS_MC_FW_IN_DDR
        printf("MC firmware is preloaded to %#llx\n", mc_ram_addr);
 #else
-       error = parse_mc_firmware_fit_image(&raw_image_addr, &raw_image_size);
+       error = parse_mc_firmware_fit_image(mc_fw_addr, &raw_image_addr,
+                                           &raw_image_size);
        if (error != 0)
                goto out;
        /*
@@ -485,20 +479,10 @@ int mc_init(void)
 #endif
        dump_ram_words("firmware", (void *)mc_ram_addr);
 
-       error = load_mc_dpc(mc_ram_addr, mc_ram_size);
-       if (error != 0)
-               goto out;
-
-       error = load_mc_dpl(mc_ram_addr, mc_ram_size);
+       error = load_mc_dpc(mc_ram_addr, mc_ram_size, mc_dpc_addr);
        if (error != 0)
                goto out;
 
-#ifdef CONFIG_SYS_LS_MC_AIOP_IMG_IN_NOR
-       error = load_mc_aiop_img(mc_ram_addr, mc_ram_size);
-       if (error != 0)
-               goto out;
-#endif
-
        debug("mc_ccsr_regs %p\n", mc_ccsr_regs);
        dump_mc_ccsr_regs(mc_ccsr_regs);
 
@@ -571,20 +555,36 @@ int mc_init(void)
               mc_ver_info.major, mc_ver_info.minor, mc_ver_info.revision,
               reg_gsr & GSR_FS_MASK);
 
+out:
+       if (error != 0)
+               mc_boot_status = error;
+       else
+               mc_boot_status = 0;
+
+       return error;
+}
+
+int mc_apply_dpl(u64 mc_dpl_addr)
+{
+       struct mc_ccsr_registers __iomem *mc_ccsr_regs = MC_CCSR_BASE_ADDR;
+       int error = 0;
+       u32 reg_gsr;
+       u64 mc_ram_addr = mc_get_dram_addr();
+       size_t mc_ram_size = mc_get_dram_block_size();
+
+       error = load_mc_dpl(mc_ram_addr, mc_ram_size, mc_dpl_addr);
+       if (error != 0)
+               return error;
+
        /*
         * Tell the MC to deploy the DPL:
         */
        out_le32(&mc_ccsr_regs->reg_gsr, 0x0);
        printf("fsl-mc: Deploying data path layout ... ");
        error = wait_for_mc(false, &reg_gsr);
-       if (error != 0)
-               goto out;
 
-out:
-       if (error != 0)
-               mc_boot_status = error;
-       else
-               mc_boot_status = 0;
+       if (!error)
+               mc_dpl_applied = 0;
 
        return error;
 }
@@ -594,6 +594,40 @@ int get_mc_boot_status(void)
        return mc_boot_status;
 }
 
+#ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET
+int get_aiop_apply_status(void)
+{
+       return mc_aiop_applied;
+}
+#endif
+
+int get_dpl_apply_status(void)
+{
+       return mc_dpl_applied;
+}
+
+/**
+ * Return the MC address of private DRAM block.
+ */
+u64 mc_get_dram_addr(void)
+{
+       u64 mc_ram_addr;
+
+       /*
+        * The MC private DRAM block was already carved at the end of DRAM
+        * by board_init_f() using CONFIG_SYS_MEM_TOP_HIDE:
+        */
+       if (gd->bd->bi_dram[1].start) {
+               mc_ram_addr =
+                       gd->bd->bi_dram[1].start + gd->bd->bi_dram[1].size;
+       } else {
+               mc_ram_addr =
+                       gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size;
+       }
+
+       return mc_ram_addr;
+}
+
 /**
  * Return the actual size of the MC private DRAM block.
  */
@@ -693,155 +727,107 @@ int dpbp_init(struct dprc_obj_desc obj_desc)
        return 0;
 }
 
-int dprc_init_container_obj(struct dprc_obj_desc obj_desc, uint16_t dprc_handle)
+int fsl_mc_ldpaa_init(bd_t *bis)
 {
-       int error = 0, state = 0;
-       struct dprc_endpoint dpni_endpoint, dpmac_endpoint;
-       if (!strcmp(obj_desc.type, "dpbp")) {
-               if (!dflt_dpbp) {
-                       error = dpbp_init(obj_desc);
-                       if (error < 0)
-                               printf("dpbp_init failed\n");
-               }
-       } else if (!strcmp(obj_desc.type, "dpio")) {
-               if (!dflt_dpio) {
-                       error = dpio_init(obj_desc);
-                       if (error < 0)
-                               printf("dpio_init failed\n");
-               }
-       } else if (!strcmp(obj_desc.type, "dpni")) {
-               strcpy(dpni_endpoint.type, obj_desc.type);
-               dpni_endpoint.id = obj_desc.id;
-               error = dprc_get_connection(dflt_mc_io, MC_CMD_NO_FLAGS,
-                                           dprc_handle, &dpni_endpoint,
-                                           &dpmac_endpoint, &state);
-               if (!strcmp(dpmac_endpoint.type, "dpmac"))
-                       error = ldpaa_eth_init(obj_desc);
-               if (error < 0)
-                       printf("ldpaa_eth_init failed\n");
-       }
 
-       return error;
+       return 0;
 }
 
-int dprc_scan_container_obj(uint16_t dprc_handle, char *obj_type, int i)
+void fsl_mc_ldpaa_exit(bd_t *bis)
 {
-       int error = 0;
-       struct dprc_obj_desc obj_desc;
-
-       memset((void *)&obj_desc, 0x00, sizeof(struct dprc_obj_desc));
-
-       error = dprc_get_obj(dflt_mc_io, MC_CMD_NO_FLAGS, dprc_handle,
-                            i, &obj_desc);
-       if (error < 0) {
-               printf("dprc_get_obj(i=%d) failed: %d\n",
-                      i, error);
-               return error;
-       }
-
-       if (!strcmp(obj_desc.type, obj_type)) {
-               debug("Discovered object: type %s, id %d, req %s\n",
-                     obj_desc.type, obj_desc.id, obj_type);
-
-               error = dprc_init_container_obj(obj_desc, dprc_handle);
-               if (error < 0) {
-                       printf("dprc_init_container_obj(i=%d) failed: %d\n",
-                              i, error);
-                       return error;
-               }
-       }
-
-       return error;
+       return;
 }
 
-int fsl_mc_ldpaa_init(bd_t *bis)
+static int do_fsl_mc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-       int i, error = 0;
-       int dprc_opened = 0, container_id;
-       int num_child_objects = 0;
-
-       error = mc_init();
-       if (error < 0)
-               goto error;
-
-       error = dprc_get_container_id(dflt_mc_io, MC_CMD_NO_FLAGS,
-                                     &container_id);
-       if (error < 0) {
-               printf("dprc_get_container_id() failed: %d\n", error);
-               goto error;
-       }
-
-       debug("fsl-mc: Container id=0x%x\n", container_id);
-
-       error = dprc_open(dflt_mc_io, MC_CMD_NO_FLAGS, container_id,
-                         &dflt_dprc_handle);
-       if (error < 0) {
-               printf("dprc_open() failed: %d\n", error);
-               goto error;
-       }
-       dprc_opened = true;
-
-       error = dprc_get_obj_count(dflt_mc_io,
-                                  MC_CMD_NO_FLAGS, dflt_dprc_handle,
-                                  &num_child_objects);
-       if (error < 0) {
-               printf("dprc_get_obj_count() failed: %d\n", error);
-               goto error;
-       }
-       debug("Total child in container %d = %d\n", container_id,
-             num_child_objects);
-
-       if (num_child_objects != 0) {
-               /*
-                * Discover objects currently in the DPRC container in the MC:
-                */
-               for (i = 0; i < num_child_objects; i++)
-                       error = dprc_scan_container_obj(dflt_dprc_handle,
-                                                       "dpbp", i);
-
-               for (i = 0; i < num_child_objects; i++)
-                       error = dprc_scan_container_obj(dflt_dprc_handle,
-                                                       "dpio", i);
-
-               for (i = 0; i < num_child_objects; i++)
-                       error = dprc_scan_container_obj(dflt_dprc_handle,
-                                                       "dpni", i);
-       }
-error:
-       if (dprc_opened)
-               dprc_close(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dprc_handle);
-
-       return error;
-}
+       int err = 0;
+       if (argc < 3)
+               goto usage;
+
+       switch (argv[1][0]) {
+       case 's': {
+                       char sub_cmd;
+                       u64 mc_fw_addr, mc_dpc_addr, aiop_fw_addr;
+
+                       sub_cmd = argv[2][0];
+                       switch (sub_cmd) {
+                       case 'm':
+                               if (argc < 5)
+                                       goto usage;
+
+                               if (get_mc_boot_status() == 0) {
+                                       printf("fsl-mc: MC is already booted");
+                                       printf("\n");
+                                       return err;
+                               }
+                               mc_fw_addr = simple_strtoull(argv[3], NULL, 16);
+                               mc_dpc_addr = simple_strtoull(argv[4], NULL,
+                                                             16);
+                               err = mc_init(mc_fw_addr, mc_dpc_addr);
+                               break;
+
+#ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET
+                       case 'a':
+                               if (argc < 4)
+                                       goto usage;
+                               if (get_aiop_apply_status() == 0) {
+                                       printf("fsl-mc: AIOP FW is already");
+                                       printf(" applied\n");
+                                       return err;
+                               }
+
+                               aiop_fw_addr = simple_strtoull(argv[3], NULL,
+                                                              16);
+
+                               err = load_mc_aiop_img(aiop_fw_addr);
+                               if (!err)
+                                       printf("fsl-mc: AIOP FW applied\n");
+                               break;
+#endif
+                       default:
+                               printf("Invalid option: %s\n", argv[2]);
+                               goto usage;
 
-void fsl_mc_ldpaa_exit(bd_t *bis)
-{
-       int err;
-
-       if (get_mc_boot_status() == 0) {
-               err = dpio_disable(dflt_mc_io, MC_CMD_NO_FLAGS,
-                                  dflt_dpio_handle);
-               if (err < 0) {
-                       printf("dpio_disable() failed: %d\n", err);
-                       return;
-               }
-               err = dpio_reset(dflt_mc_io, MC_CMD_NO_FLAGS,
-                                dflt_dpio_handle);
-               if (err < 0) {
-                       printf("dpio_reset() failed: %d\n", err);
-                       return;
+                               break;
+                       }
                }
-               err = dpio_close(dflt_mc_io, MC_CMD_NO_FLAGS,
-                                dflt_dpio_handle);
-               if (err < 0) {
-                       printf("dpio_close() failed: %d\n", err);
-                       return;
+               break;
+
+       case 'a': {
+                       u64 mc_dpl_addr;
+
+                       if (argc < 4)
+                               goto usage;
+
+                       if (get_dpl_apply_status() == 0) {
+                               printf("fsl-mc: DPL already applied\n");
+                               return err;
+                       }
+
+                       mc_dpl_addr = simple_strtoull(argv[3], NULL,
+                                                             16);
+                       if (get_mc_boot_status() != 0) {
+                               printf("fsl-mc: Deploying data path layout ..");
+                               printf("ERROR (MC is not booted)\n");
+                               return -ENODEV;
+                       }
+                       err = mc_apply_dpl(mc_dpl_addr);
+                       break;
                }
-
-               free(dflt_dpio);
-               free(dflt_dpbp);
+       default:
+               printf("Invalid option: %s\n", argv[1]);
+               goto usage;
+               break;
        }
-
-       if (dflt_mc_io)
-               free(dflt_mc_io);
+       return err;
+ usage:
+       return CMD_RET_USAGE;
 }
+
+U_BOOT_CMD(
+       fsl_mc,  CONFIG_SYS_MAXARGS,  1,   do_fsl_mc,
+       "DPAA2 command to manage Management Complex (MC)",
+       "start mc [FW_addr] [DPC_addr] - Start Management Complex\n"
+       "fsl_mc apply DPL [DPL_addr] - Apply DPL file\n"
+       "fsl_mc start aiop [FW_addr] - Start AIOP\n"
+);
index 8a97f758e5dae4756e72d0e68eb40e7660395fb6..b3cf113179f3d857aa9e54350b8e22a55fdd04b1 100644 (file)
@@ -250,19 +250,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
 #define CONFIG_SYS_DEBUG_SERVER_FW_ADDR        0x580D00000ULL
 
-/* MC firmware */
-#define CONFIG_SYS_LS_MC_FW_IN_NOR
-#define CONFIG_SYS_LS_MC_FW_ADDR       0x580300000ULL
-
-#define CONFIG_SYS_LS_MC_DPL_IN_NOR
-#define CONFIG_SYS_LS_MC_DPL_ADDR      0x580700000ULL
-
-#define CONFIG_SYS_LS_MC_DPC_IN_NOR
-#define CONFIG_SYS_LS_MC_DPC_ADDR      0x580800000ULL
-
 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
-#define CONFIG_SYS_LS_MC_AIOP_IMG_IN_NOR
-#define CONFIG_SYS_LS_MC_AIOP_IMG_ADDR 0x580900000ULL
 
 /*
  * I2C
index 26f74b63ade760fff3fb1dc06590992020562d82..b85dbbe13cb15b905e5c3a9800b3bd7f956dca4e 100644 (file)
@@ -223,19 +223,7 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
 #define CONFIG_SYS_DEBUG_SERVER_FW_ADDR        0x580D00000ULL
 
-/* MC firmware */
-#define CONFIG_SYS_LS_MC_FW_IN_NOR
-#define CONFIG_SYS_LS_MC_FW_ADDR       0x580300000ULL
-
-#define CONFIG_SYS_LS_MC_DPL_IN_NOR
-#define CONFIG_SYS_LS_MC_DPL_ADDR      0x580700000ULL
-
-#define CONFIG_SYS_LS_MC_DPC_IN_NOR
-#define CONFIG_SYS_LS_MC_DPC_ADDR      0x580800000ULL
-
 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
-#define CONFIG_SYS_LS_MC_AIOP_IMG_IN_NOR
-#define CONFIG_SYS_LS_MC_AIOP_IMG_ADDR 0x580900000ULL
 
 /*
  * I2C
index 9517a4a7b5d753ba2beb49b8f14a00f04794244f..c8f168a3d2a628ee1efd6e88938c65fc87637841 100644 (file)
@@ -50,6 +50,11 @@ struct mc_ccsr_registers {
 };
 
 int get_mc_boot_status(void);
+int get_dpl_apply_status(void);
+#ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET
+int get_aiop_apply_status(void);
+#endif
+u64 mc_get_dram_addr(void);
 unsigned long mc_get_dram_block_size(void);
 int fsl_mc_ldpaa_init(bd_t *bis);
 void fsl_mc_ldpaa_exit(bd_t *bis);
index 9f0697851b74eb6fc3d113fb2dbbddecbb58a304..942136215a369e39e01da0f7134dbcdcfbfaa9c4 100644 (file)
@@ -45,6 +45,6 @@ struct fsl_dpio_obj {
 
 extern struct fsl_dpio_obj *dflt_dpio;
 
-int mc_init(void);
+int mc_init(u64 mc_fw_addr, u64 mc_dpc_addr);
 int ldpaa_eth_init(struct dprc_obj_desc obj_desc);
 #endif /* _FSL_MC_PRIVATE_H_ */