readline/README

   1 Introduction
   2 ============
   3
   4 This is the Gnu Readline library, version 4.3.
   5
   6 The Readline library provides a set of functions for use by applications
   7 that allow users to edit command lines as they are typed in.  Both
   8 Emacs and vi editing modes are available.  The Readline library includes
   9 additional functions to maintain a list of previously-entered command
  10 lines, to recall and perhaps reedit those lines, and perform csh-like
  11 history expansion on previous commands.
  12
  13 The history facilites are also placed into a separate library, the
  14 History library, as part of the build process.  The History library
  15 may be used without Readline in applications which desire its
  16 capabilities.
  17
  18 The Readline library is free software, distributed under the terms of
  19 the [GNU] General Public License, version 2.  For more information, see
  20 the file COPYING.
  21
  22 To build the library, try typing `./configure', then `make'.  The
  23 configuration process is automated, so no further intervention should
  24 be necessary.  Readline builds with `gcc' by default if it is
  25 available.  If you want to use `cc' instead, type
  26
  27         CC=cc ./configure
  28
  29 if you are using a Bourne-style shell.  If you are not, the following
  30 may work:
  31
  32         env CC=cc ./configure
  33
  34 Read the file INSTALL in this directory for more information about how
  35 to customize and control the build process.
  36
  37 The file rlconf.h contains C preprocessor defines that enable and disable
  38 certain Readline features.
  39
  40 The special make target `everything' will build the static and shared
  41 libraries (if the target platform supports them) and the examples.
  42
  43 Examples
  44 ========
  45
  46 There are several example programs that use Readline features in the
  47 examples directory.  The `rl' program is of particular interest.  It
  48 is a command-line interface to Readline, suitable for use in shell
  49 scripts in place of `read'.
  50
  51 Shared Libraries
  52 ================
  53
  54 There is skeletal support for building shared versions of the
  55 Readline and History libraries.  The configure script creates
  56 a Makefile in the `shlib' subdirectory, and typing `make shared'
  57 will cause shared versions of the Readline and History libraries
  58 to be built on supported platforms.
  59
  60 If `configure' is given the `--enable-shared' option, it will attempt
  61 to build the shared libraries by default on supported platforms.
  62
  63 Configure calls the script support/shobj-conf to test whether or
  64 not shared library creation is supported and to generate the values
  65 of variables that are substituted into shlib/Makefile.  If you
  66 try to build shared libraries on an unsupported platform, `make'
  67 will display a message asking you to update support/shobj-conf for
  68 your platform.
  69
  70 If you need to update support/shobj-conf, you will need to create
  71 a `stanza' for your operating system and compiler.  The script uses
  72 the value of host_os and ${CC} as determined by configure.  For
  73 instance, FreeBSD 4.2 with any version of gcc is identified as
  74 `freebsd4.2-gcc*'.
  75
  76 In the stanza for your operating system-compiler pair, you will need to
  77 define several variables.  They are:
  78
  79 SHOBJ_CC        The C compiler used to compile source files into shareable
  80                 object files.  This is normally set to the value of ${CC}
  81                 by configure, and should not need to be changed.
  82
  83 SHOBJ_CFLAGS    Flags to pass to the C compiler ($SHOBJ_CC) to create
  84                 position-independent code.  If you are using gcc, this
  85                 should probably be set to `-fpic'.
  86
  87 SHOBJ_LD        The link editor to be used to create the shared library from
  88                 the object files created by $SHOBJ_CC.  If you are using
  89                 gcc, a value of `gcc' will probably work.
  90
  91 SHOBJ_LDFLAGS   Flags to pass to SHOBJ_LD to enable shared object creation.
  92                 If you are using gcc, `-shared' may be all that is necessary.
  93                 These should be the flags needed for generic shared object
  94                 creation.
  95
  96 SHLIB_XLDFLAGS  Additional flags to pass to SHOBJ_LD for shared library
  97                 creation.  Many systems use the -R option to the link
  98                 editor to embed a path within the library for run-time
  99                 library searches.  A reasonable value for such systems would
 100                 be `-R$(libdir)'.
 101
 102 SHLIB_LIBS      Any additional libraries that shared libraries should be
 103                 linked against when they are created.
 104
 105 SHLIB_LIBSUFF   The suffix to add to `libreadline' and `libhistory' when
 106                 generating the filename of the shared library.  Many systems
 107                 use `so'; HP-UX uses `sl'.
 108
 109 SHLIB_LIBVERSION The string to append to the filename to indicate the version
 110                 of the shared library.  It should begin with $(SHLIB_LIBSUFF),
 111                 and possibly include version information that allows the
 112                 run-time loader to load the version of the shared library
 113                 appropriate for a particular program.  Systems using shared
 114                 libraries similar to SunOS 4.x use major and minor library
 115                 version numbers; for those systems a value of
 116                 `$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)' is appropriate.
 117                 Systems based on System V Release 4 don't use minor version
 118                 numbers; use `$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' on those systems.
 119                 Other Unix versions use different schemes.
 120
 121 SHLIB_STATUS    Set this to `supported' when you have defined the other
 122                 necessary variables.  Make uses this to determine whether
 123                 or not shared library creation should be attempted.
 124
 125 You should look at the existing stanzas in support/shobj-conf for ideas.
 126
 127 Once you have updated support/shobj-conf, re-run configure and type
 128 `make shared'.  The shared libraries will be created in the shlib
 129 subdirectory.
 130
 131 If shared libraries are created, `make install' will install them.
 132 You may install only the shared libraries by running `make
 133 install-shared' from the top-level build directory.  Running `make
 134 install' in the shlib subdirectory will also work.  If you don't want
 135 to install any created shared libraries, run `make install-static'.
 136
 137 Documentation
 138 =============
 139
 140 The documentation for the Readline and History libraries appears in
 141 the `doc' subdirectory.  There are three texinfo files and a
 142 Unix-style manual page describing the facilities available in the
 143 Readline library.  The texinfo files include both user and
 144 programmer's manuals.  HTML versions of the manuals appear in the
 145 `doc' subdirectory as well.
 146
 147 Reporting Bugs
 148 ==============
 149
 150 Bug reports for Readline should be sent to:
 151
 152         bug-readline@gnu.org
 153
 154 When reporting a bug, please include the following information:
 155
 156         * the version number and release status of Readline (e.g., 4.2-release)
 157         * the machine and OS that it is running on
 158         * a list of the compilation flags or the contents of `config.h', if
 159           appropriate
 160         * a description of the bug
 161         * a recipe for recreating the bug reliably
 162         * a fix for the bug if you have one!
 163
 164 If you would like to contact the Readline maintainer directly, send mail
 165 to bash-maintainers@gnu.org.
 166
 167 Since Readline is developed along with bash, the bug-bash@gnu.org mailing
 168 list (mirrored to the Usenet newsgroup gnu.bash.bug) often contains
 169 Readline bug reports and fixes.
 170
 171 Chet Ramey
 172 chet@po.cwru.edu