The libusb-based USB backend printed slowly to the LaserJet 1300 and other

[thirdparty/cups.git] / CHANGES-1.4.txt

CHANGES-1.4.txt
---------------

CHANGES IN CUPS V1.4.7

        - Documentation changes (STR #3710, STR #3720, STR #3745, STR #3750,
          STR #3757)
        - The libusb-based USB backend printed slowly to the LaserJet 1300 and
          other printers (STR #3405)
        - "lp" and "lpr" failed to print with Kerberos enabled (STR #3768)
        - The web interface now shows the manual URI entry form for auto-
          detected LPD printers without a queue name (STR #3755)
        - The cupsctl program now displays an error if you try to directly set
          the Port or Listen directives (STR #3749)
        - PPD files with "*JobPatchFile: bla" no longer fail to load in relaxed
          conformance mode (STR #3747)
        - The scheduler generated a bad notify-text string for printer state
          change notifications (STR #3739)
        - The scheduler incorrectly updated printers.conf when it really needed
          to update classes.conf or remote.cache (STR #3726)
        - Hardwired remote printers with options did not work (STR #3717)
        - Accessing the CUPS web interface using a CNAME-based hostname would
          sometimes fail due to redirection to the actual hostname (STR #3701)
        - Subscription events had a misspelled attribute (STR #3693)
        - PIE support was broken (STR #3691)
        - "make check" failed if LC_MESSAGES was set (STR #3765)
        - Fixed the configure script to always look for the pkg-config script
          (STR #3761)
        - The scheduler now only looks up interface hostnames if HostNameLookups
          are enabled (STR #3737)
        - Fixed a compilation problem on DragonFly BSD (STR #3738)
        - The default PageLogFormat value had the username and job ID swapped
          from CUPS 1.3.x (STR #3727)
        - The web interface did not allow setting of a default custom page size
          (STR #3707)
        - The scheduler could crash if a browsed printer times out while a job
          is printing (STR #3754)
        - The scheduler incorrectly mapped custom page sizes to standard sizes
          (STR #3764)
        - cupsfilter and pstops did not map IPP attributes to PPD options due to
          a change in cupsMarkOptions (STR #3756)
        - The scheduler did not always show the most recent status message from
          the print filters (STR #3731)
        - The PostScript filter did not apply the mirror and number-up options
          properly, leading to offset and clipped output (STR #3732)
        - The network backends always reported "low toner" or "out of toner"
          states, even for inkjet printers (STR #3733)


CHANGES IN CUPS V1.4.6

        - Fixed a "make check" issue on Solaris (STR #3729)
        - Regression: The pstops filter did not support landscape printing of
          PostScript files (STR #3722)
        - The scheduler killed retried (fax) jobs after restarting them
          (STR #3697)
        - The cupsAdminSetServerSettings() function disabled sharing when
          debug logging was enabled (STR #3712)


CHANGES IN CUPS V1.4.5

        - Documentation fixes (STR #3542, STR #3650)
        - Localization fixes (STR #3635, STR #3636, STR #3647, STR #3666)
        - Security: Fixed a memory corruption bug reported in CVE-2010-2941
          (STR #3648)
        - The CUPS API incorrectly mapped the HTTP_UNAUTHORIZED status to the
          IPP_NOT_AUTHORIZED status code, when IPP_NOT_AUTHENTICATED would be
          the correct mapping (STR #3684)
        - The scheduler would restart jobs while shutting down (STR #3679)
        - Fixed a PPD loader bug that could cause a crash in cupsd (STR #3680)
        - Improved the mapping of non-standard PPD and PWG names (STR #3671)
        - The scheduler did not initialize Kerberos in all cases (STR #3662)
        - cupsAdminSetServerSettings duplicated Listen and Order lines
          (STR #3645)
        - Added DeviceN colorspace support to the CUPS Raster format (STR #3419)
        - ppdMarkDefaults() did not clear the marked field of the previous
          choices (STR #3642)
        - The serial backend would not allow a raw job to be canceled
          (STR #3649)
        - The socket backend could go into an infinite loop with certain
          printers (STR #3622)
        - Setting the PRINTER or LPDEST environment variables to "name/instance"
          did not work (STR #3485)
        - The scheduler did not handle the JobRetryLimit setting properly
          (STR #3466)
        - The lpstat command always showed a remote job ID of 0 for shared
          printers (STR #3627)
        - Increased the write timeout for the libusb-based USB backend to 5
          minutes (STR #3595)
        - The libusb-base USB backend did not check whether the printer has a
          serial number (STR #3590)
        - The lpadmin command did not support setting of custom option values
          (STR #3631)
        - The lpadmin command did not support setting of the location or
          description of a class (STR #3613)
        - The cupsaddsmb command did not give up after too many failed attempts
          (STR #3615)
        - The CUPS library no longer uses certain problematic ctype macros that
          change based on the locale's character set.
        - PJL value substitution of more than 9 values was broken (STR #3621)
        - Custom options with missing string values caused ppdEmit* to segfault
          (STR #3620)
        - Fixed an issue with the Italian version of the web interface
          (STR #3624)
        - Fixed the Solaris SMF configuration file for cups-lpd (STR #3611)
        - The scheduler did not set the notify-subscribed-event attribute when
          delivering printer-added or printer-modified events (STR #3608)
        - The mailto notifier could get into an infinite loop (STR #3609)
        - Date/time information was not shown in banner pages.
        - Relational operators were broken in #if/#elif/#else/#endif expressions
          for the PPD compiler.
        - Moving a job via the web interface failed without asking for
          authentication (STR #3559)
        - The scheduler now clears the printer-state-reasons when the driver is
          changed (STR #3570)
        - The web interface did not allow a user to change the driver
          (STR #3537, STR #3601)
        - The scheduler was not setting the PATH_INFO environment variable when
          needed (STR #3600)
        - The scheduler incorrectly set the CUPSD_AUTH_TYPE environment
          variable instead of AUTH_TYPE (STR #3599)
        - Fixed a buffer overrun in the PPD compiler (STR #3594)
        - Fixed some additional IPP job template attribute mapping issues in the
          scheduler.


CHANGES IN CUPS V1.4.4

        - Documentation updates (STR #3453, STR #3527, STR #3528, STR #3529)
        - Security: The fix for CVE-2009-3553 was incomplete (STR #3490)
        - Security: The texttops filter did not check the results of allocations
          (STR #3516)
        - Security: The web admin interface could disclose the contents of
          memory (STR #3577)
        - Security: CUPS could overwrite files as root in directories owned or
          writable by non-root users (STR #3510)
        - The cups-config utility did not return the correct linker options on
          AIX (STR #3587)
        - Fixed some IPP conformance issues with the scheduler's
          ippget-event-life, operations-supported, output-bin, and sides
          attributes (STR #3554)
        - The OpenSSL interfaces have been made thread-safe and the GNU TLS
          interface is explicitly forbidden when threading is enabled
          (STR #3461)
        - Fixed an IPP conformance issue with the scheduler's Send-Document
          implementation (STR #3514)
        - Added additional validation checks for the 1284 device ID (STR #3534)
        - Fixed a problem with the RPM spec file (STR #3544)
        - The lpstat command did not limit the job list to the specified
          printers (STR #3541)
        - The cupsfilter command did not set the RIP_MAX_CACHE environment
          variable (STR #3531)
        - Fixed support for media-col and page size variants (STR #3394)
        - The PostScript filter did not support all media selection options for
          the first page (STR #3525)
        - The scheduler did not always remove job control files (STR #3425)
        - The scheduler could crash on restart if classes were defined
          (STR #3524)
        - The scheduler no longer looks up network interface hostnames by
          default on Mac OS X (STR #3523)
        - ippWriteIO did not write collection (member) attributes properly in
          all cases (STR #3521)
        - The "cupsctl --remote-any" and corresponding web interface check box
          (allow printing from the Internet) did not work reliably (STR #3520)
        - The lpq and lpr commands would sometimes choose different default
          printers (STR #3503)
        - cupsDo*Request did not flush error text, leading to multiple issues
          (STR #3325, STR #3519)
        - cupsDoAuthentication did not cancel password authentication after 3
          failures (STR #3518)
        - Fixed several LDAP browsing bugs (STR #3392)
        - The Dymo driver did not support copies (STR #3457)
        - The scheduler did not update the classes.conf file when deleting a
          printer belonging to a class (STR #3505)
        - The lppasswd command did not use localized password prompts
          (STR #3492)
        - The socket backend no longer waits for back-channel data on platforms
          other than Mac OS X (STR #3495)
        - The scheduler didn't send events when a printer started accepting or
          rejecting jobs (STR #3480)
        - The web interface now includes additional CSRF protection (STR #3498)


CHANGES IN CUPS V1.4.3

        - SECURITY: The scheduler could try responding on a closed client
          connection, leading to a crash (STR #3200)
        - SECURITY: The lppasswd program allowed the localization files to be
          overridden when running in setuid mode (STR #3482)
        - Localization updates (STR #3352, STR #3409, STR #3422, STR #3452,
          STR #3473, STR #3502)
        - Documentation updates (STR #3451, STR #3504)
        - The IPP backend now sets the printer-state-message to "Ready to
          print." at the end of a successful job (STR #3460)
        - The PPD compiler did not correctly add the manufacturer to the output
          filename when using the "-m" option (STR #3469)
        - The IPP backend did not handle authentication properly for the Get-
          Printer-Attributes operation (STR 3458)
        - Getting SNMP values larger than 127 bytes did not work.
        - IPP conformance: Get-Jobs has a default value for requested-attributes
          (STR #3383)
        - cupsPrintFiles() did not report all errors (STR #3449)
        - cupsAddDest() could read freed memory (STR #3448)
        - The DBUS notifier did not build (STR #3447)
        - The scheduler would crash when an active printer was deleted.
        - The snmp backend did not work with some printers (STR #3413)
        - The web interface did not show the conflicting values when setting
          options (STR #3440)
        - Setting options in the web interface did not always work (STR #3439)
        - The scheduler did not use the Get-Job-Attributes policy for a printer
          (STR #3431)
        - The scheduler added two job-name attributes to each job object
          (STR #3428)
        - CSS files would not print (STR #3442)
        - The scheduler did not clean out completed jobs when PreserveJobHistory
          was turned off (STR #3425)
        - The web interface did not show completed jobs for a printer
          (STR #3436)
        - Authenticated printing did not always work when printing directly to
          a remote server (STR #3435)
        - The USB backend did not work on Solaris (STR #3423)
        - cupstestppd didn't catch problems with JobPatchFile definitions
          (STR #3421)
        - The socket backend could crash if a SNMP string had a negative length.
        - Fixed some termination issues with the USB backend on Mac OS X.
        - The side-channel APIs did not handle interrupts properly.
        - The network backends incorrectly cleared the media-empty-warning
          state.
        - The web interface did not allow users to successfully add serial
          printers (STR #3391)
        - cupsTempFd() did not work in some situations (STR #3382)
        - Some C API headers were missing C++ wrapper logic.
        - The PPD compiler did not localize single-language PPD options properly
          (STR #3386)
        - Modifying a printer from the web interface sometimes caused the wrong
          driver to be selected (STR #3418)
        - The scheduler did not handle out-of-memory conditions properly when
          loading a job (STR #3407)
        - When adding printers from the web interface, the dynamic updates of
          the device list made it hard to pick a device (STR #3406)
        - Fixed a typo in the web interface admin page template (STR 3403)
        - The web interface did not preserve the "printer is shared" state when
          modifying a printer (STR #3390)
        - The PPD compiler incorrectly inserted translations of empty strings
          (STR #3411)
        - The scheduler did not reset the SIGPIPE handler of child processes
          (STR #3399)
        - cupsGetNamedDest() incorrectly returned the default printer if the
          named printer did not exist (STR #3397)
        - Fixed a GNU TLS error handling bug (STR #3381)


CHANGES IN CUPS V1.4.2

        - SECURITY: The CUPS web interface was vulnerable to several XSS and
          HTTP header/body attacks via attribute injection (STR #3367,
          STR #3401)
        - Fixed localization errors (STR #3359, STR #3372, STR #3380, STR #3387)
        - The documentation for classes.conf and printers.conf did not provide
          the correct instructions for manual changes (STR #3351)
        - The scheduler did not always rebuild printer cache files when the
          driver was changed (STR #3356)
        - The documentation makefile failed to install localizations when using
          newer versions of Bash (STR #3360)
        - The configure script did not use the --with-xinetd value for the
          default LPD configuration path (STR #3347)
        - The configure script incorrectly required glib for DBUS support
          (STR #3346)
        - The cupstestppd program incorrectly reported filters with bad
          permisssions as missing (STR #3363)
        - The cups.desktop file used the wrong locale names (STR #3358)
        - cupsSideChannelRead() did not return an error for short reads.
        - The installed PAM configuration file did not use the correct options
          with the pam_unix2 module (STR #3313)
        - The scheduler did not preserve default options that contained special
          characters (STR #3340)
        - The scheduler did not remove old pre-filters when updating a printer
          driver (STR #3342)
        - The HP/GL-2 filter did not check for early end-of-file (STR #3319)
        - The USB backend did not compile on some platforms (STR #3332)
        - cupsSideChannelSNMPWalk() could go into an infinite loop with broken
          SNMP implementations.


CHANGES IN CUPS V1.4.1

        - Documention fixes (STR #3296)
        - SNMP supply levels and states were wrong for some printers.
        - The IPP backend did not update the auth-info-required value.
        - The libusb-based USB backend would hang at the end of the job
          (STR #3315, STR #3318)
        - DNS-SD registrations for raw queues had an empty "ty" key (STR #3299)
        - The JPEG and BMP MIME type rules were broken (STR #3284)
        - cupsGetNamedDest returned the default printer when the named
          destination did not exist (STR #3285)
        - The JobKillDelay was not triggered for canceled jobs (STR #3292)
        - The PPD compiler could get in an infinite loop (STR #3293)
        - The configure check for dns-sd.h was broken (STR #3297)
        - The "Query Printer for Default Options" page did not go away if the
          query job was held (STR #3302)
        - Boolean options did not show up as selected in the web interface
          (STR #3303)
        - The scheduler did not cache or report driver information files
          correctly, leading to a variety of issues (STR #3283, STR #3297,
          STR #3305)
        - cupsDoIORequest() did not abort on permanent errors (STR #3311)
        - Modifying a class in the web interface did not work (STR #3312)
        - BrowseLocalProtocols could be cleared when changing the sharing
          setting (STR #3287)
        - The scheduler could return an empty supported document format
          (STR #3308)
        - The PPD compiler generated invalid PPD files when the locale used
          something other than "." for the decimal point (STR #3300)
        - The IPP backend did not handle some non-comforming IPP printer
          implementations (STR #3262)
        - The scheduler leaked three file descriptors to each job filter
          (STR #3263)
        - The scheduler now uses a default CUPS-Get-Devices timeout of 15
          seconds (STR #3307)


CHANGES IN CUPS V1.4.0

        - Localization updates (STR #3223, STR #3246, STR #3248, STR #3250)
        - Documentation updates (STR #3225, STR #3230, STR #3242, STR #3260)
        - The --with-pdftops configure option did not accept a full path to the
          filter (STR #3278)
        - The banner filter did not position the back side image correctly
          (STR #3277)
        - The dnssd backend could crash (STR #3272)
        - The 1284 device ID sometimes contained trailing garbage (STR #3266)
        - The USB backend returned different URIs for some printers than in
          CUPS 1.3 (STR #3259)
        - The scheduler did not do local job-hold-until processing for remote
          queues (STR #3258)
        - The scheduler did not try all possible SSL certificates on Mac OS X.
        - The scheduler did not always remove a file descriptor when using the
          kqueue interface (STR #3256)
        - The scheduler did not protect against bad job control files in all
          cases (STR #3253)
        - The scheduler did not encode "+" in model names (STR #3254)
        - The web interface didn't show the default options (STR #3244)
        - The IPP and LPD backends needed print data before they would do an
          SNMP query.
        - Fixed a GNU TLS compatibility issue (STR #3231)
        - Fixed a HTML error in the add and modify printer web interface
          templates (STR #3229)
        - The scheduler did not minimize the number of printer state events that
          were generated by filter STATE: messages, which could lead to poor
          performance.
        - The USB backend on Mac OS X did not cleanly cancel a job.
        - The network backends now set the connecting-to-device printer-state-
          reasons value when looking up the address and copying the print data
          for consistency.
        - The scheduler now supports the com.apple.print.recoverable-warning
          reason on all platforms.


CHANGES IN CUPS V1.4rc1

        - The PPD compiler documentation was missing information on localization
          (STR #3212)
        - The IPP backend now reconnects after every request when talking to
          printers that claim IPP support but only use HTTP/1.0.
        - The PPD compiler crashed when both "Resolution" and "Group foo Option
          Resolution" were specified in the .drv file.
        - The PPD compiler's #if/#elif/#else/#endif did not work for undefined
          variables (STR #3210)
        - Static libraries could not be installed by a non-root user on systems
          needing a ranlib program (STR #3209)
        - The scheduler incorrectly always tried to copy Kerberos credentials
          for print jobs.
        - Updated the Spanish localization (STR #3204)
        - The scheduler crashed when getting the default paper size from
          libpaper (STR #3205, STR #3206)
        - The PPD compiler now defines six variables: CUPS_VERSION,
          CUPS_VERSION_MAJOR, CUPS_VERSION_MINOR, CUPS_VERSION_PATCH,
          PLATFORM_NAME, and PLATFORM_ARCH (STR #3203)
        - Fixed a whitespace skipping bug in cupsRasterInterpretPPD.
        - The scheduler did not return HTTP 403 (Forbidden) for authenticated
          users that were not authorized to do IPP operations (STR #3193)
        - The scheduler did not report more than 8 Product strings from a PPD
          file.  Some PPD files have as many as 24.
        - ppdOpen*() could crash if a keyword had no value string (something
          that cupstestppd looks for...)
        - cupsLangDefault() did not return the correct language on Mac OS X.
        - The Mac OS X USB backend did not handle aborted or stalled pipe
          conditions properly, which prevented drivers from ejecting partial
          pages when a job was canceled or held.


CHANGES IN CUPS V1.4b3

        - Documentation fixes (STR #3044, STR #3057, STR #3153, STR #3158,
          STR #3173)
        - Added complete localizations for German, Japanese, Polish, and
          Russian and partial localizations for Chinese, Danish, Finnish,
          French, Italian, Korean, Norwegian, Portuguese, and Swedish
          (STR #3096, STR #3098, STR #3109, STR #3111, STR #3141)
        - Updated the configure check for -fstack-protector (STR #3198)
        - The network backends now correctly convert SNMP supply descriptions to
          UTF-8 encoding as needed.
        - The scheduler could crash when deleting an attribute (STR #3197)
        - The cups-driverd program did not detect symlink loops (STR #3185)
        - The EPSON 24-pin series driver should now feed the correct amount
          (STR #2624)
        - The scheduler now automatically logs the last N debug messages for
          failed print jobs.
        - You can now modify a raw print queue (STR #3133)
        - Fixed a number of ppdi issues and added a unit test to validate that
          ppdc + ppdi can generate and import the same data (STR #3152)
        - Moving jobs in the web interface now shows an error if you only have
          one printer or class added (STR #3094)
        - Since classes have never truly supported the printer-error-policy
          stuff added in CUPS 1.2, update the code to reflect the current
          reality and support only the retry-current-job policy for now
          (STR #3171)
        - Revised the password callback support (STR #2953)
        - ppdEmit*() did not choose between PageSize and PageRegion properly.
        - Make some fairly substantial changes to the Kerberos support code so
          that CUPS can work in multi-realm environments and does not require
          delegatable credentials.  Shared printing still requires delegation,
          however "delegation by policy" can be enabled in the KDC to make this
          all work.
        - "AccessLogLevel actions" did not hide client-error-not-found errors.
        - AP_FIRST_InputSlot did not work with number-up.
        - cupsBackChannelRead() and cupsBackChannelWrite() could fail due to a
          lack of kernel buffers.
        - The IPP and LPD backends did not respond to side-channel requests
          while copying print data to a temporary file.
        - cupsWriteRequestData() flushed the output buffer unnecessarily,
          causing reduced performance in some situations.
        - If a CGI process died before sending its MIME headers, the request
          would hang on the client.
        - The printer/class/job search feature on the web interface did not
          work (STR #3132)
        - The scheduler did not write the printers out for classes.
        - CUPS-Get-PPDs did not work properly when filtering by language,
          product, or psversion (STR #3136)
        - The scheduler now kills job filters when it takes more than 30 seconds
          (configurable) to cancel or hold the job.
        - The cupstestppd program did not validate the capitalization of
          filenames in the PPD file.
        - The cupstestppd program did not validate the PageSize and PageRegion
          values.
        - The cups-deviced helper program could miss reporting some backend
          devices (STR #3108)
        - The cupsSideChannelSNMP* functions did not work.
        - The scheduler could consume 100% CPU when jobs were canceled.
        - Clicking on "Select Another Make/Manufacturer" in the web interface
          incorrectly added the printer (STR #3095)
        - The scheduler no longer uses programs with insecure file
          permissions.
        - httpAssembleURI*() did not escape backslashes in hostnames.
        - The dnssd backend did not unquote "full names" before creating the
          device URI.
        - The scheduler now supports JobRetryInterval values less than 10
          seconds.
        - Updated the Spanish localization (STR #3090)
        - The scheduler did not redo Bonjour/DNS-SD registrations when updating
          them failed.
        - The "authenticated" policy incorrectly required authentication for
          status operations.
        - ppdOpen*() incorrectly loaded PPDs with multiple JobPatchFile
          keywords.
        - The network backends no longer report the SNMP "offline" or
          maintenance status bits since they are inconsistently implemented and
          often unreliable.
        - The scheduler no longer logs child processes killed via SIGKILL as
          "crashed".
        - The printer link shown on the "job moved" template was bad (STR #3085)
        - Updated the HTML templates to use the final HTML 4 DOCTYPE (STR #3086)
        - The scheduler did not track the "paused" reason properly if a
          printer had other reasons associated with it.
        - cupsSendRequest() did not clear old local certificate auth data.
        - The PPD compiler did not search for localization files properly
          (STR #3084)
        - cupsGetNamedDest() did not use the fallback default like
          cupsGetDests*() (STR #3082)
        - The scheduler now provides a LogTimeFormat directive to enable
          microseconds in the date and time that are logged.
        - The scheduler now provides a MultipleOperationTimeout directive to
          control the timeout for multi-file print jobs.
        - The configure script incorrectly allowed Avahi to be used for DNS-SD
          printer discovery (STR #3065)
        - The web interface and scheduler did not support URIs up to 1024 bytes
          in length (STR #3072)
        - Fixed pdftops issues with page sizes (STR #3063)
        - Fixed pdftops issues with Ghostscript (STR #3062)
        - The scheduler incorrectly registered default profiles for PostScript
          printers with no specified colorspace.
        - The scheduler incorrectly created an empty org.cups.printers.plist
          file on Mac OS X.
        - cupsGetPPD3() did not look for local PPDs in the right directory.
        - SNMP lookups via side-channel did not work for NULL-VALUE and
          and OCTET-STRING OIDs containing nul characters.
        - The libusb-based USB backend did not work.
        - The scheduler did not set the printer-commands attribute correctly
          for some PPDs.
        - The ppdi utility did not work.
        - The web interface no longer uses multi-part output with old or broken
          web browsers (STR #3049)
        - CUPS now conforms to the draft IPP/2.0 and IPP/2.1 specification.
        - Added a new cupsGetConflicts() API to get a list of conflicting
          options.
        - The PPD compiler didn't localize options or choices that did not
          have associated translation text (STR #3045)
        - Updated the Spanish localization (STR #3043)
        - Fixed build problems (STR #3040, STR #3047)
        - cupsResolveConflicts() did not resolve using the default option
          choice in some cases due to the mirror UIConstraints that are
          present in most PPD files.
        - The scheduler did not honor MIME type priorities.
        - The commandtops filter incorrectly used the JCLBegin code to end
          its jobs.
        - The default BrowseLocalProtocols value was not set properly.
        - Since the commandtops filter does not actually support ReportLevels
          all on its own, don't list that printer command by default for PS
          printers.
        - The scheduler did not give filters a chance to log errors or update
          printer attributes when a job was canceled.
        - The scheduler did not clear the "connecting-to-device" reason keyword
          when a job finished.


CHANGES IN CUPS V1.4b2

        - Documentation updates (STR #2983, STR #2998, STR #3021)
        - The cupstestppd utility now validates the FileVersion and
          FormatVersion values in PPD files.
        - The default cupsd.conf file did not reflect the
          --with-local-protocols value set at compile-time (STR #3037)
        - The cupsGetPPD* APIs now create symlinks to local PPD files
          rather than copying them whenever possible.
        - Various performance optimizations in the string pool, dests, and
          options implementations.
        - The cupsGetDests* APIs now return the marker and printer-commands
          attributes.
        - Side-channel SNMP lookups would not work when cupsSNMPSupplies
          was set to False in the PPD file.
        - Localized the device descriptions for the SCSI, serial,
          and network backends (STR #3014)
        - Added a Spanish localization (STR #3015)
        - Added support for marker-low-levels and marker-high-levels
          attributes.
        - The scheduler could hang writing a long log line.
        - The cupsGetDevices() function now has an "include_schemes"
          parameter.
        - The lpinfo command now supports --include-schemes and
          --exclude-schemes options.
        - The CUPS-Get-PPDs operation now supports the include-schemes
          and exclude-schemes attributes.
        - The CUPS-Get-Devices operation now supports the include-schemes
          attribute.
        - The print filters now support a replacement for the fitplot
          option called "fit-to-page".
        - The LPD backend no longer tries to collect page accounting
          information since the LPD protocol does not allow us to
          prevent race conditions.
        - The scheduler did not save the last marker-change-time value.
        - Fixed a problem with printing to some IPP printers, including
          CUPS 1.1.x.
        - Fixed a redirection problem with the printer web page (STR #3012)
        - Fixed a PPD compiler problem with the loading of message
          catalogs (STR #2990)
        - Fixed a PPD compiler problem with the loading of .strings files
          (STR #2989)
        - The cupsfilter utility did not set the CONTENT_TYPE environment
          variable when running filters.
        - The scheduler now waits to allow system sleep until the jobs
          have all stopped.
        - The IPP, LPD, and socket backends used different "connecting"
          progress messages.


CHANGES IN CUPS V1.4b1

        - Documentation updates (STR #2567)
        - The PPD compiler now allows local message catalogs to
          override the standard CUPS translations (STR #2642)
        - The ppdmerge command did not merge custom option strings
          (STR #2863)
        - The scheduler now supports the Hold-New-Jobs and
          Release-Held-New-Jobs operations; these are exposed via the
          cupsdisable and cupsenable commands (STR #2332)
        - The lpstat command is now much faster when displaying the
          status of a single printer (STR #2843)
        - The scheduler now caches information from PPD files to provide
          significantly faster startup time with large numbers of PPDs
          (STR #1293)
        - CUPS-Get-Driver now provides much better driver matching based
          on the IEEE-1284 device ID and make/model strings (STR #2707)
        - Now support the cupsSNMPSupplies keyword to control whether
          the network backends query the SNMP Printer MIB for supply
          levels.
        - Now support and use a new banner file format for better text
          support and easier customization (STR #2490)
        - The scheduler now sets the PRINTER_INFO and PRINTER_LOCATION
          environment variables from the corresponding IPP attributes.
        - The ippRead*() and ippWrite*() functions no longer use a
          stack-based buffer (STR #2388)
        - The CUPS-Add-Modify-Printer operation now allows you to set
          the printer-state-reasons attribute.
        - The "set printer options" page now supports auto-configuration
          of printer options (STR #1440)
        - The web interface now provides an advanced server settings
          form.
        - The web interface's "modify printer" pages now make it
          easier to change just one setting (STR #1919)
        - The scheduler now supports a plist PrintcapFormat.
        - The scheduler now supports multiple addresses in Allow and
          Deny lines, just like Apache (STR #2947)
        - Added CUPS_JOBTYPE environment variable for job filters so
          they know whether they are printing a banner or document
          file (STR #2799)
        - Added support for printer filtering by the cupsfilter
          command (STR #2562)
        - Added a SSLOptions directive to allow Windows clients to
          talk to CUPS in FIPS mode (STR #2827)
        - Renamed the accept and reject commands to cupsaccept and
          cupsreject; the old names are still available (STR #2936)
        - The locale/translate utility needed an update to work with
          Google (STR #2882)
        - The lpstat command now supports a -H option to display the
          default server (STR #2833)
        - The scheduler now supports a FatalErrors directive to control
          which errors should cause the scheduler to exit (STR #2536)
        - The scheduler now uses the php-cgi program if it is available
          (STR #2923)
        - The scheduler now supports a DefaultPaperSize directive
          (STR #2848)
        - The scheduler now passes the job-originating-host-name
          value to filters in the options argument (STR #2558)
        - CUPS now supports job tickets in PDF files (STR #2903)
        - Added a DBUS notifier (STR #2529)
        - The LPD mini-daemon now passes the document name when queuing
          print jobs (STR #2482)
        - The IPP backend did not relay com.apple.print.recoverable-message
          values.
        - The scheduler now supports a job-media-progress attribute to
          track the progress of individual pages.
        - The sample HP driver now supports A5 (STR #2798)
        - The CUPS web interface menu item now uses the xdg-open
          command, when available (STR #2724)
        - The cups-lpd program now supports the -h option (STR #2794)
        - The scheduler now sets the PAM_TTY parameter and the
          PAM_ESTABLISH_CRED credential flag (STR #2745)
        - The scheduler now logs unsuccessful requests to the error_log
          file as errors (STR #2616)
        - Added support for a "retry-current-job" error policy that
          retries the current job immediately when the backend encounters
          an error (STR #2555)
        - The scheduler now returns a "forbidden" error when a user
          correctly authenticates but does not have permission to
          continue further (STR #2101)
        - The scheduler now loads both the server and CA certificates
          (if present) from the ServerCertificate file (STR #2146)
        - New RSS subscriptions now create their feed files immediately
          (STR #2853)
        - Added support for a device-location attribute which provides
          the physical location of a printer device.
        - Added a cupsBackendReport() API which handles quoting of the
          device data by a backend.
        - Added support for custom options in the web interface
          (STR #1729)
        - Added support for Mozilla LDAP, reconnection to LDAP servers,
          and improved LDAP performance (STR #1962)
        - Added Solaris SMF support (STR #1477)
        - Added optional support for using TCP wrappers to limit access
          to CUPS (STR #263)
        - Added ppdPageSizeLimits API.
        - Added support for new cupsMediaQualifier2, cupsMediaQualifier3,
          cupsMinSize, and cupsMaxSize attributes.
        - Added cupsResolveConflicts and ppdInstallableConflict APIs.
        - Added support for new cupsUIConstraints and cupsUIResolver
          attributes for better option conflict detection and
          resolution.
        - Increased the maximum size of 1284 device ID strings to
          256 bytes (STR #2877)
        - Added an AccessLogLevel directive to cupsd.conf to control
          what is logged to the access_log file.
        - The default LogLevel is now "warn" instead of "info" to reduce
          the amount of logging that is done to disk by default.
        - The PPD compiler did not include OID query keywords in PPD
          files (STR #2871)
        - The cups-driverd helper program now directly supports driver
          information files.
        - The USB backend now uses libusb when available (STR #1575)
        - Added ppdLocalizeAttr function to get the localized version
          of an attribute.
        - MIME types now support a priority() attribute (STR #2719)
        - The standard MIME types are now installed in
          DataDir/mime (STR #2719)
        - The lpoptions command now describes custom options and
          the necessary parameters (STR #2660)
        - The ppdmerge program did not support Simplified Chinese
          or Traditional Chinese language version strings (STR #2851)
        - The PPD compiler now supports localizable attributes
          (STR #2738)
        - The ppdpo utility now includes cupsIPPReasons values in
          the message catalogs it generates (STR #2754)
        - The PPD compiler now supports conditional directives
          (STR #2636)
        - The ppdc utility now supports a "-t" option to test PPD
          files (STR #2739)
        - The ppdc utility now supports a "-m" option to use the
          ModelName value as the output filename.
        - The ppdc utility now supports a FileName directive to
          set an alternate output filename (STR #2740)
        - The side-channel API now supports SNMP queries for the
          standard network backends.
        - Added a PageLogFormat directive to the cupsd.conf file to
          control the format of lines in the page_log file.
        - Filters can now send PPD: messages to stderr to set PPD
          keywords like DefaultPageSize while a job is printing.
        - Added a mdns backend for discovery and printing to printers
          that advertise themselves via DNS-SD (Bonjour)
        - The ipp, lpd, and socket backends now support DNS-SD service
          name resolution.
        - The scheduler now uses a single shared file descriptor for
          all DNS-SD registrations (STR #2674)
        - The ipp, lpd, and socket backends now support SNMP-based
          page accounting and supply level monitoring (STR #1655)
        - Added support for cupsPJLDisplay attribute to control what
          PJL commands are used to display the job information.
        - Driver information files can now be installed in
          /Library/Printers/PPDs.drv on Mac OS X.
        - The CUPS image library now supports reading images larger
          than 2GB.
        - The scheduler now delays writing config and state files to
          reduce disk activity (STR #2684)
        - The CUPS-Get-Devices operation now supports the
          exclude-schemes and timeout attributes to control which
          backends are polled and for how long.
        - The cups-deviced helper application now runs backends in
          parallel to get the list of devices faster.
        - Added --enable-pap configure option.
        - The default cupsd.conf file now includes an "authenticated"
          policy which requires authentication for remote print jobs.
        - Added support for Czech and Hungarian in PPD files
          (STR #2735, STR #2736)
        - The PPD compiler tools now support Mac OS X .strings files
          for localization (STR #2737)
        - ppdOpen*() now default the colorspace member to PPD_CS_N
          when no DefaultColorSpace attribute is present in the PPD
          file.
        - The build system has been updated to support separate
          installation of data, program, header, and library files.
        - All support libraries are now built as shared libraries
          by default.
        - The scheduler now manages ICC color profiles on Mac OS X.
        - The network backends (ipp, lpd, socket) now support
          SNMP-based supply and page count monitoring (STR #1655)
        - The lppasswd program is no longer installed setuid to
          root to make the default installation more secure.
        - Added a new ppdLocalizeMarkerName() function to get
          the localized version of a marker-names value.
        - The scheduler now provides the printer-dns-sd-name
          attribute for printers shared via DNS-SD/Bonjour.
        - The pdftops filter now executes the Xpdf or poppler
          pdftops utility to convert PDF files (STR #1471)
        - Bonjour printer registrations now advertise as local or
          global based on the current access policies for the
          printer.
        - cupsGetDests*() and cupsSetDests*() now track the last
          used printer preference on Mac OS X.
        - Added a new streaming request API (STR #2261)
        - Added a new cupsGetNamedDest() function to the CUPS
          library for faster printing with lp and lpr (STR #2638)
        - The scheduler now sets the PAM RHOST value on systems
          that support it (STR #2637)
        - The scheduler now sandboxes child processes when
          possible.
        - The Cancel-Job operation now supports a purge-job
          attriibute to purge a specified job.
        - ppdEmit* and ppdCollect* now use the NonUIOrderDependency
          attributes for custom option selections.
        - The web interface now enables/disables the printer
          sharing (formerly publishing) controls based on the
          server-is-sharing-printers state (STR #2233)
        - The scheduler now tracks printer sharing via the
          server-is-sharing-printers attribute, and manages LPD
          and SMB sharing as well (STR #2233)
        - The web interface now allows you to go back to the make/
          manufacturer page if there is no matching printer driver
          on the model page (STR #2436)
        - The printer list now shows the default media, banner, and
          duplex options as well as the color and duplex capabilities
          of printers (STR #1175)
        - The web interface look-n-feel has been updated (STR #2492)
        - The scheduler now supports a CUPS-Get-Document operation
          that returns the specified print job document (STR #118)
        - The cupsfilter utility now supports a "-J jobid" option
          to filter the document from the specified job.
        - The scheduler (cupsd) now supports a new option (-t) to
          do a syntax check of the cupsd.conf file (STR #2003)
        - Added new cupsGetPPD3() API to allow applications to
          cache PPDs safely (STR #1473)
        - Added generic PostScript and PCL printer driver PPDs.