1 "\t\t(all)" = "\t\t(all)";
2 "\t\t(none)" = "\t\t(none)";
3 "\t%d entries" = "\t%d entries";
5 "\tAfter fault: continue" = "\tAfter fault: continue";
6 "\tAlerts: %s" = "\tAlerts: %s";
7 "\tBanner required" = "\tBanner required";
8 "\tCharset sets:" = "\tCharset sets:";
9 "\tConnection: direct" = "\tConnection: direct";
10 "\tConnection: remote" = "\tConnection: remote";
11 "\tContent types: any" = "\tContent types: any";
12 "\tDefault page size:" = "\tDefault page size:";
13 "\tDefault pitch:" = "\tDefault pitch:";
14 "\tDefault port settings:" = "\tDefault port settings:";
15 "\tDescription: %s" = "\tDescription: %s";
16 "\tForm mounted:" = "\tForm mounted:";
17 "\tForms allowed:" = "\tForms allowed:";
18 "\tInterface: %s.ppd" = "\tInterface: %s.ppd";
19 "\tInterface: %s/ppd/%s.ppd" = "\tInterface: %s/ppd/%s.ppd";
20 "\tLocation: %s" = "\tLocation: %s";
21 "\tOn fault: no alert" = "\tOn fault: no alert";
22 "\tPrinter types: unknown" = "\tPrinter types: unknown";
23 "\tStatus: %s" = "\tStatus: %s";
24 "\tUsers allowed:" = "\tUsers allowed:";
25 "\tUsers denied:" = "\tUsers denied:";
26 "\tdaemon present" = "\tdaemon present";
27 "\tno entries" = "\tno entries";
28 "\tprinter is on device '%s' speed -1" = "\tprinter is on device ‘%s’ speed -1";
29 "\tprinting is disabled" = "\tprinting is disabled";
30 "\tprinting is enabled" = "\tprinting is enabled";
31 "\tqueued for %s" = "\tqueued for %s";
32 "\tqueuing is disabled" = "\tqueuing is disabled";
33 "\tqueuing is enabled" = "\tqueuing is enabled";
34 "\treason unknown" = "\treason unknown";
35 "\n DETAILED CONFORMANCE TEST RESULTS" = "\n DETAILED CONFORMANCE TEST RESULTS";
36 " Ignore specific warnings." = " Ignore specific warnings.";
37 " Issue warnings instead of errors." = " Issue warnings instead of errors.";
38 " REF: Page 15, section 3.1." = " REF: Page 15, section 3.1.";
39 " REF: Page 15, section 3.2." = " REF: Page 15, section 3.2.";
40 " REF: Page 19, section 3.3." = " REF: Page 19, section 3.3.";
41 " REF: Page 20, section 3.4." = " REF: Page 20, section 3.4.";
42 " REF: Page 27, section 3.5." = " REF: Page 27, section 3.5.";
43 " REF: Page 42, section 5.2." = " REF: Page 42, section 5.2.";
44 " REF: Pages 16-17, section 3.2." = " REF: Pages 16-17, section 3.2.";
45 " REF: Pages 42-45, section 5.2." = " REF: Pages 42-45, section 5.2.";
46 " REF: Pages 45-46, section 5.2." = " REF: Pages 45-46, section 5.2.";
47 " REF: Pages 48-49, section 5.2." = " REF: Pages 48-49, section 5.2.";
48 " REF: Pages 52-54, section 5.2." = " REF: Pages 52-54, section 5.2.";
49 " %-39.39s %.0f bytes" = " %-39.39s %.0f bytes";
50 " PASS Default%s" = " PASS Default%s";
51 " PASS DefaultImageableArea" = " PASS DefaultImageableArea";
52 " PASS DefaultPaperDimension" = " PASS DefaultPaperDimension";
53 " PASS FileVersion" = " PASS FileVersion";
54 " PASS FormatVersion" = " PASS FormatVersion";
55 " PASS LanguageEncoding" = " PASS LanguageEncoding";
56 " PASS LanguageVersion" = " PASS LanguageVersion";
57 " PASS Manufacturer" = " PASS Manufacturer";
58 " PASS ModelName" = " PASS ModelName";
59 " PASS NickName" = " PASS NickName";
60 " PASS PCFileName" = " PASS PCFileName";
61 " PASS PSVersion" = " PASS PSVersion";
62 " PASS PageRegion" = " PASS PageRegion";
63 " PASS PageSize" = " PASS PageSize";
64 " PASS Product" = " PASS Product";
65 " PASS ShortNickName" = " PASS ShortNickName";
66 " WARN %s has no corresponding options." = " WARN %s has no corresponding options.";
67 " WARN %s shares a common prefix with %s\n REF: Page 15, section 3.2." = " WARN %s shares a common prefix with %s\n REF: Page 15, section 3.2.";
68 " WARN Duplex option keyword %s may not work as expected and should be named Duplex.\n REF: Page 122, section 5.17" = " WARN Duplex option keyword %s may not work as expected and should be named Duplex.\n REF: Page 122, section 5.17";
69 " WARN File contains a mix of CR, LF, and CR LF line endings." = " WARN File contains a mix of CR, LF, and CR LF line endings.";
70 " WARN LanguageEncoding required by PPD 4.3 spec.\n REF: Pages 56-57, section 5.3." = " WARN LanguageEncoding required by PPD 4.3 spec.\n REF: Pages 56-57, section 5.3.";
71 " WARN Line %d only contains whitespace." = " WARN Line %d only contains whitespace.";
72 " WARN Manufacturer required by PPD 4.3 spec.\n REF: Pages 58-59, section 5.3." = " WARN Manufacturer required by PPD 4.3 spec.\n REF: Pages 58-59, section 5.3.";
73 " WARN Non-Windows PPD files should use lines ending with only LF, not CR LF." = " WARN Non-Windows PPD files should use lines ending with only LF, not CR LF.";
74 " WARN Obsolete PPD version %.1f.\n REF: Page 42, section 5.2." = " WARN Obsolete PPD version %.1f.\n REF: Page 42, section 5.2.";
75 " WARN PCFileName longer than 8.3 in violation of PPD spec.\n REF: Pages 61-62, section 5.3." = " WARN PCFileName longer than 8.3 in violation of PPD spec.\n REF: Pages 61-62, section 5.3.";
76 " WARN PCFileName should contain a unique filename.\n REF: Pages 61-62, section 5.3." = " WARN PCFileName should contain a unique filename.\n REF: Pages 61-62, section 5.3.";
77 " WARN Protocols contains PJL but JCL attributes are not set.\n REF: Pages 78-79, section 5.7." = " WARN Protocols contains PJL but JCL attributes are not set.\n REF: Pages 78-79, section 5.7.";
78 " WARN Protocols contains both PJL and BCP; expected TBCP.\n REF: Pages 78-79, section 5.7." = " WARN Protocols contains both PJL and BCP; expected TBCP.\n REF: Pages 78-79, section 5.7.";
79 " WARN ShortNickName required by PPD 4.3 spec.\n REF: Pages 64-65, section 5.3." = " WARN ShortNickName required by PPD 4.3 spec.\n REF: Pages 64-65, section 5.3.";
80 " cupsaddsmb [options] -a" = " cupsaddsmb [options] -a";
81 " cupstestdsc [options] -" = " cupstestdsc [options] -";
82 " program | cupstestppd [options] -" = " program | cupstestppd [options] -";
83 " %s \"%s %s\" conflicts with \"%s %s\"\n (constraint=\"%s %s %s %s\")." = " %s “%s %s” conflicts with “%s %s”\n (constraint=“%s %s %s %s”).";
84 " %s %s %s does not exist." = " %s %s %s does not exist.";
85 " %s %s file \"%s\" has the wrong capitalization." = " %s %s file “%s” has the wrong capitalization.";
86 " %s Bad %s choice %s.\n REF: Page 122, section 5.17" = " %s Bad %s choice %s.\n REF: Page 122, section 5.17";
87 " %s Bad UTF-8 \"%s\" translation string for option %s, choice %s." = " %s Bad UTF-8 “%s” translation string for option %s, choice %s.";
88 " %s Bad UTF-8 \"%s\" translation string for option %s." = " %s Bad UTF-8 “%s” translation string for option %s.";
89 " %s Bad cupsFilter value \"%s\"." = " %s Bad cupsFilter value “%s”.";
90 " %s Bad cupsFilter2 value \"%s\"." = " %s Bad cupsFilter2 value “%s”.";
91 " %s Bad cupsICCProfile %s." = " %s Bad cupsICCProfile %s.";
92 " %s Bad cupsPreFilter value \"%s\"." = " %s Bad cupsPreFilter value “%s”.";
93 " %s Bad cupsUIConstraints %s: \"%s\"" = " %s Bad cupsUIConstraints %s: “%s”";
94 " %s Bad language \"%s\"." = " %s Bad language “%s”.";
95 " %s Bad permissions on %s file \"%s\"." = " %s Bad permissions on %s file “%s”.";
96 " %s Bad spelling of %s - should be %s." = " %s Bad spelling of %s - should be %s.";
97 " %s Cannot provide both APScanAppPath and APScanAppBundleID." = " %s Cannot provide both APScanAppPath and APScanAppBundleID.";
98 " %s Default choices conflicting." = " %s Default choices conflicting.";
99 " %s Empty cupsUIConstraints %s" = " %s Empty cupsUIConstraints %s";
100 " %s Missing \"%s\" translation string for option %s, choice %s." = " %s Missing “%s” translation string for option %s, choice %s.";
101 " %s Missing \"%s\" translation string for option %s." = " %s Missing “%s” translation string for option %s.";
102 " %s Missing %s file \"%s\"." = " %s Missing %s file “%s”.";
103 " %s Missing REQUIRED PageRegion option.\n REF: Page 100, section 5.14." = " %s Missing REQUIRED PageRegion option.\n REF: Page 100, section 5.14.";
104 " %s Missing REQUIRED PageSize option.\n REF: Page 99, section 5.14." = " %s Missing REQUIRED PageSize option.\n REF: Page 99, section 5.14.";
105 " %s Missing choice *%s %s in UIConstraints \"*%s %s *%s %s\"." = " %s Missing choice *%s %s in UIConstraints “*%s %s *%s %s”.";
106 " %s Missing choice *%s %s in cupsUIConstraints %s: \"%s\"" = " %s Missing choice *%s %s in cupsUIConstraints %s: “%s”";
107 " %s Missing cupsUIResolver %s" = " %s Missing cupsUIResolver %s";
108 " %s Missing option %s in UIConstraints \"*%s %s *%s %s\"." = " %s Missing option %s in UIConstraints “*%s %s *%s %s”.";
109 " %s Missing option %s in cupsUIConstraints %s: \"%s\"" = " %s Missing option %s in cupsUIConstraints %s: “%s”";
110 " %s No base translation \"%s\" is included in file." = " %s No base translation “%s” is included in file.";
111 " %s REQUIRED %s does not define choice None.\n REF: Page 122, section 5.17" = " %s REQUIRED %s does not define choice None.\n REF: Page 122, section 5.17";
112 " %s Size \"%s\" defined for %s but not for %s." = " %s Size “%s” defined for %s but not for %s.";
113 " %s Size \"%s\" has unexpected dimensions (%gx%g)." = " %s Size “%s” has unexpected dimensions (%gx%g).";
114 " %s Size \"%s\" should be \"%s\"." = " %s Size “%s” should be “%s”.";
115 " %s Size \"%s\" should be the Adobe standard name \"%s\"." = " %s Size “%s” should be the Adobe standard name “%s”.";
116 " %s cupsICCProfile %s hash value collides with %s." = " %s cupsICCProfile %s hash value collides with %s.";
117 " %s cupsUIResolver %s causes a loop." = " %s cupsUIResolver %s causes a loop.";
118 " %s cupsUIResolver %s does not list at least two different options." = " %s cupsUIResolver %s does not list at least two different options.";
119 " **FAIL** %s must be 1284DeviceID\n REF: Page 72, section 5.5" = " **FAIL** %s must be 1284DeviceID\n REF: Page 72, section 5.5";
120 " **FAIL** Bad Default%s %s\n REF: Page 40, section 4.5." = " **FAIL** Bad Default%s %s\n REF: Page 40, section 4.5.";
121 " **FAIL** Bad DefaultImageableArea %s\n REF: Page 102, section 5.15." = " **FAIL** Bad DefaultImageableArea %s\n REF: Page 102, section 5.15.";
122 " **FAIL** Bad DefaultPaperDimension %s\n REF: Page 103, section 5.15." = " **FAIL** Bad DefaultPaperDimension %s\n REF: Page 103, section 5.15.";
123 " **FAIL** Bad FileVersion \"%s\"\n REF: Page 56, section 5.3." = " **FAIL** Bad FileVersion “%s”\n REF: Page 56, section 5.3.";
124 " **FAIL** Bad FormatVersion \"%s\"\n REF: Page 56, section 5.3." = " **FAIL** Bad FormatVersion “%s”\n REF: Page 56, section 5.3.";
125 " **FAIL** Bad JobPatchFile attribute in file\n REF: Page 24, section 3.4." = " **FAIL** Bad JobPatchFile attribute in file\n REF: Page 24, section 3.4.";
126 " **FAIL** Bad LanguageEncoding %s - must be ISOLatin1." = " **FAIL** Bad LanguageEncoding %s - must be ISOLatin1.";
127 " **FAIL** Bad LanguageVersion %s - must be English." = " **FAIL** Bad LanguageVersion %s - must be English.";
128 " **FAIL** Bad Manufacturer (should be \"%s\")\n REF: Page 211, table D.1." = " **FAIL** Bad Manufacturer (should be “%s”)\n REF: Page 211, table D.1.";
129 " **FAIL** Bad ModelName - \"%c\" not allowed in string.\n REF: Pages 59-60, section 5.3." = " **FAIL** Bad ModelName - “%c” not allowed in string.\n REF: Pages 59-60, section 5.3.";
130 " **FAIL** Bad PSVersion - not \"(string) int\".\n REF: Pages 62-64, section 5.3." = " **FAIL** Bad PSVersion - not “(string) int”.\n REF: Pages 62-64, section 5.3.";
131 " **FAIL** Bad Product - not \"(string)\".\n REF: Page 62, section 5.3." = " **FAIL** Bad Product - not “(string)”.\n REF: Page 62, section 5.3.";
132 " **FAIL** Bad ShortNickName - longer than 31 chars.\n REF: Pages 64-65, section 5.3." = " **FAIL** Bad ShortNickName - longer than 31 chars.\n REF: Pages 64-65, section 5.3.";
133 " **FAIL** Bad option %s choice %s\n REF: Page 84, section 5.9" = " **FAIL** Bad option %s choice %s\n REF: Page 84, section 5.9";
134 " **FAIL** Default option code cannot be interpreted: %s" = " **FAIL** Default option code cannot be interpreted: %s";
135 " **FAIL** Default translation string for option %s choice %s contains 8-bit characters." = " **FAIL** Default translation string for option %s choice %s contains 8-bit characters.";
136 " **FAIL** Default translation string for option %s contains 8-bit characters." = " **FAIL** Default translation string for option %s contains 8-bit characters.";
137 " **FAIL** Group names %s and %s differ only by case." = " **FAIL** Group names %s and %s differ only by case.";
138 " **FAIL** Multiple occurrences of option %s choice name %s." = " **FAIL** Multiple occurrences of option %s choice name %s.";
139 " **FAIL** Option %s choice names %s and %s differ only by case." = " **FAIL** Option %s choice names %s and %s differ only by case.";
140 " **FAIL** Option names %s and %s differ only by case." = " **FAIL** Option names %s and %s differ only by case.";
141 " **FAIL** REQUIRED Default%s\n REF: Page 40, section 4.5." = " **FAIL** REQUIRED Default%s\n REF: Page 40, section 4.5.";
142 " **FAIL** REQUIRED DefaultImageableArea\n REF: Page 102, section 5.15." = " **FAIL** REQUIRED DefaultImageableArea\n REF: Page 102, section 5.15.";
143 " **FAIL** REQUIRED DefaultPaperDimension\n REF: Page 103, section 5.15." = " **FAIL** REQUIRED DefaultPaperDimension\n REF: Page 103, section 5.15.";
144 " **FAIL** REQUIRED FileVersion\n REF: Page 56, section 5.3." = " **FAIL** REQUIRED FileVersion\n REF: Page 56, section 5.3.";
145 " **FAIL** REQUIRED FormatVersion\n REF: Page 56, section 5.3." = " **FAIL** REQUIRED FormatVersion\n REF: Page 56, section 5.3.";
146 " **FAIL** REQUIRED ImageableArea for PageSize %s\n REF: Page 41, section 5.\n REF: Page 102, section 5.15." = " **FAIL** REQUIRED ImageableArea for PageSize %s\n REF: Page 41, section 5.\n REF: Page 102, section 5.15.";
147 " **FAIL** REQUIRED LanguageEncoding\n REF: Pages 56-57, section 5.3." = " **FAIL** REQUIRED LanguageEncoding\n REF: Pages 56-57, section 5.3.";
148 " **FAIL** REQUIRED LanguageVersion\n REF: Pages 57-58, section 5.3." = " **FAIL** REQUIRED LanguageVersion\n REF: Pages 57-58, section 5.3.";
149 " **FAIL** REQUIRED Manufacturer\n REF: Pages 58-59, section 5.3." = " **FAIL** REQUIRED Manufacturer\n REF: Pages 58-59, section 5.3.";
150 " **FAIL** REQUIRED ModelName\n REF: Pages 59-60, section 5.3." = " **FAIL** REQUIRED ModelName\n REF: Pages 59-60, section 5.3.";
151 " **FAIL** REQUIRED NickName\n REF: Page 60, section 5.3." = " **FAIL** REQUIRED NickName\n REF: Page 60, section 5.3.";
152 " **FAIL** REQUIRED PCFileName\n REF: Pages 61-62, section 5.3." = " **FAIL** REQUIRED PCFileName\n REF: Pages 61-62, section 5.3.";
153 " **FAIL** REQUIRED PSVersion\n REF: Pages 62-64, section 5.3." = " **FAIL** REQUIRED PSVersion\n REF: Pages 62-64, section 5.3.";
154 " **FAIL** REQUIRED PageRegion\n REF: Page 100, section 5.14." = " **FAIL** REQUIRED PageRegion\n REF: Page 100, section 5.14.";
155 " **FAIL** REQUIRED PageSize\n REF: Page 41, section 5.\n REF: Page 99, section 5.14." = " **FAIL** REQUIRED PageSize\n REF: Page 41, section 5.\n REF: Page 99, section 5.14.";
156 " **FAIL** REQUIRED PageSize\n REF: Pages 99-100, section 5.14." = " **FAIL** REQUIRED PageSize\n REF: Pages 99-100, section 5.14.";
157 " **FAIL** REQUIRED PaperDimension for PageSize %s\n REF: Page 41, section 5.\n REF: Page 103, section 5.15." = " **FAIL** REQUIRED PaperDimension for PageSize %s\n REF: Page 41, section 5.\n REF: Page 103, section 5.15.";
158 " **FAIL** REQUIRED Product\n REF: Page 62, section 5.3." = " **FAIL** REQUIRED Product\n REF: Page 62, section 5.3.";
159 " **FAIL** REQUIRED ShortNickName\n REF: Page 64-65, section 5.3." = " **FAIL** REQUIRED ShortNickName\n REF: Page 64-65, section 5.3.";
160 " **FAIL** Unable to open PPD file - %s on line %d." = " **FAIL** Unable to open PPD file - %s on line %d.";
161 " %d ERRORS FOUND" = " %d ERRORS FOUND";
162 " -h Show program usage" = " -h Show program usage";
163 " Bad %%%%BoundingBox: on line %d.\n REF: Page 39, %%%%BoundingBox:" = " Bad %%%%BoundingBox: on line %d.\n REF: Page 39, %%%%BoundingBox:";
164 " Bad %%%%Page: on line %d.\n REF: Page 53, %%%%Page:" = " Bad %%%%Page: on line %d.\n REF: Page 53, %%%%Page:";
165 " Bad %%%%Pages: on line %d.\n REF: Page 43, %%%%Pages:" = " Bad %%%%Pages: on line %d.\n REF: Page 43, %%%%Pages:";
166 " Line %d is longer than 255 characters (%d).\n REF: Page 25, Line Length" = " Line %d is longer than 255 characters (%d).\n REF: Page 25, Line Length";
167 " Missing %!PS-Adobe-3.0 on first line.\n REF: Page 17, 3.1 Conforming Documents" = " Missing %!PS-Adobe-3.0 on first line.\n REF: Page 17, 3.1 Conforming Documents";
168 " Missing %%EndComments comment. REF: Page 41, %%EndComments" = " Missing %%EndComments comment. REF: Page 41, %%EndComments";
169 " Missing or bad %%BoundingBox: comment.\n REF: Page 39, %%BoundingBox:" = " Missing or bad %%BoundingBox: comment.\n REF: Page 39, %%BoundingBox:";
170 " Missing or bad %%Page: comments.\n REF: Page 53, %%Page:" = " Missing or bad %%Page: comments.\n REF: Page 53, %%Page:";
171 " Missing or bad %%Pages: comment.\n REF: Page 43, %%Pages:" = " Missing or bad %%Pages: comment.\n REF: Page 43, %%Pages:";
172 " NO ERRORS FOUND" = " NO ERRORS FOUND";
173 " Saw %d lines that exceeded 255 characters." = " Saw %d lines that exceeded 255 characters.";
174 " Too many %%BeginDocument comments." = " Too many %%BeginDocument comments.";
175 " Too many %%EndDocument comments." = " Too many %%EndDocument comments.";
176 " Warning: file contains binary data." = " Warning: file contains binary data.";
177 " Warning: no %%EndComments comment in file." = " Warning: no %%EndComments comment in file.";
178 " Warning: obsolete DSC version %.1f in file." = " Warning: obsolete DSC version %.1f in file.";
179 " ! expression Unary NOT of expression." = " ! expression Unary NOT of expression.";
180 " ( expressions ) Group expressions." = " ( expressions ) Group expressions.";
181 " --[no-]debug-logging Turn debug logging on/off." = " --[no-]debug-logging Turn debug logging on/off.";
182 " --[no-]remote-admin Turn remote administration on/off." = " --[no-]remote-admin Turn remote administration on/off.";
183 " --[no-]remote-any Allow/prevent access from the Internet." = " --[no-]remote-any Allow/prevent access from the Internet.";
184 " --[no-]share-printers Turn printer sharing on/off." = " --[no-]share-printers Turn printer sharing on/off.";
185 " --[no-]user-cancel-any Allow/prevent users to cancel any job." = " --[no-]user-cancel-any Allow/prevent users to cancel any job.";
186 " --cr End lines with CR (Mac OS 9)." = " --cr End lines with CR (Mac OS 9).";
187 " --crlf End lines with CR + LF (Windows)." = " --crlf End lines with CR + LF (Windows).";
188 " --domain regex Match domain to regular expression." = " --domain regex Match domain to regular expression.";
189 " --exec utility [argument ...] ;\n Execute program if true." = " --exec utility [argument …] ;\n Execute program if true.";
190 " --false Always false." = " --false Always false.";
191 " --help Show help." = " --help Show help.";
192 " --help Show this help." = " --help Show this help.";
193 " --host regex Match hostname to regular expression." = " --host regex Match hostname to regular expression.";
194 " --ippserver filename Produce ippserver attribute file." = " --ippserver filename Produce ippserver attribute file.";
195 " --lf End lines with LF (UNIX/Linux/macOS)." = " --lf End lines with LF (UNIX/Linux/macOS).";
196 " --list-filters List filters that will be used." = " --list-filters List filters that will be used.";
197 " --local True if service is local." = " --local True if service is local.";
198 " --ls List attributes." = " --ls List attributes.";
199 " --name regex Match service name to regular expression." = " --name regex Match service name to regular expression.";
200 " --not expression Unary NOT of expression." = " --not expression Unary NOT of expression.";
201 " --path regex Match resource path to regular expression." = " --path regex Match resource path to regular expression.";
202 " --port number[-number] Match port to number or range." = " --port number[-number] Match port to number or range.";
203 " --print Print URI if true." = " --print Print URI if true.";
204 " --print-name Print service name if true." = " --print-name Print service name if true.";
205 " --quiet Quietly report match via exit code." = " --quiet Quietly report match via exit code.";
206 " --remote True if service is remote." = " --remote True if service is remote.";
207 " --stop-after-include-error\n Stop tests after a failed INCLUDE." = " --stop-after-include-error\n Stop tests after a failed INCLUDE.";
208 " --true Always true." = " --true Always true.";
209 " --txt key True if the TXT record contains the key." = " --txt key True if the TXT record contains the key.";
210 " --txt-* regex Match TXT record key to regular expression." = " --txt-* regex Match TXT record key to regular expression.";
211 " --uri regex Match URI to regular expression." = " --uri regex Match URI to regular expression.";
212 " --version Show program version." = " --version Show program version.";
213 " --version Show version." = " --version Show version.";
214 " -4 Connect using IPv4." = " -4 Connect using IPv4.";
215 " -6 Connect using IPv6." = " -6 Connect using IPv6.";
216 " -C Send requests using chunking (default)." = " -C Send requests using chunking (default).";
217 " -D Remove the input file when finished." = " -D Remove the input file when finished.";
218 " -D name=value Set named variable to value." = " -D name=value Set named variable to value.";
219 " -E Encrypt the connection." = " -E Encrypt the connection.";
220 " -E Test with encryption using HTTP Upgrade to TLS." = " -E Test with encryption using HTTP Upgrade to TLS.";
221 " -F Run in the foreground but detach from console." = " -F Run in the foreground but detach from console.";
222 " -H samba-server Use the named SAMBA server." = " -H samba-server Use the named SAMBA server.";
223 " -I Ignore errors." = " -I Ignore errors.";
224 " -I include-dir Add include directory to search path." = " -I include-dir Add include directory to search path.";
225 " -I {filename,filters,none,profiles}" = " -I {filename,filters,none,profiles}";
226 " -L Send requests using content-length." = " -L Send requests using content-length.";
227 " -P filename.plist Produce XML plist to a file and test report to standard output." = " -P filename.plist Produce XML plist to a file and test report to standard output.";
228 " -P filename.ppd Set PPD file." = " -P filename.ppd Set PPD file.";
229 " -P number[-number] Match port to number or range." = " -P number[-number] Match port to number or range.";
230 " -R root-directory Set alternate root." = " -R root-directory Set alternate root.";
231 " -S Test with encryption using HTTPS." = " -S Test with encryption using HTTPS.";
232 " -T seconds Set the browse timeout in seconds." = " -T seconds Set the browse timeout in seconds.";
233 " -T seconds Set the receive/send timeout in seconds." = " -T seconds Set the receive/send timeout in seconds.";
234 " -U username Specify username." = " -U username Specify username.";
235 " -V version Set default IPP version." = " -V version Set default IPP version.";
236 " -W {all,none,constraints,defaults,duplex,filters,profiles,sizes,translations}" = " -W {all,none,constraints,defaults,duplex,filters,profiles,sizes,translations}";
237 " -X Produce XML plist instead of plain text." = " -X Produce XML plist instead of plain text.";
238 " -a Export all printers." = " -a Export all printers.";
239 " -c Produce CSV output." = " -c Produce CSV output.";
240 " -c catalog.po Load the specified message catalog." = " -c catalog.po Load the specified message catalog.";
241 " -c cups-files.conf Set cups-files.conf file to use." = " -c cups-files.conf Set cups-files.conf file to use.";
242 " -c cupsd.conf Set cupsd.conf file to use." = " -c cupsd.conf Set cupsd.conf file to use.";
243 " -d name=value Set named variable to value." = " -d name=value Set named variable to value.";
244 " -d output-dir Specify the output directory." = " -d output-dir Specify the output directory.";
245 " -d printer Use the named printer." = " -d printer Use the named printer.";
246 " -d regex Match domain to regular expression." = " -d regex Match domain to regular expression.";
247 " -e Use every filter from the PPD file." = " -e Use every filter from the PPD file.";
248 " -f Run in the foreground." = " -f Run in the foreground.";
249 " -f filename Set default request filename." = " -f filename Set default request filename.";
250 " -h Show this usage message." = " -h Show this usage message.";
251 " -h Validate HTTP response headers." = " -h Validate HTTP response headers.";
252 " -h regex Match hostname to regular expression." = " -h regex Match hostname to regular expression.";
253 " -h server[:port] Specify server address." = " -h server[:port] Specify server address.";
254 " -i mime/type Set input MIME type (otherwise auto-typed)." = " -i mime/type Set input MIME type (otherwise auto-typed).";
255 " -i seconds Repeat the last file with the given time interval." = " -i seconds Repeat the last file with the given time interval.";
256 " -j job-id[,N] Filter file N from the specified job (default is file 1)." = " -j job-id[,N] Filter file N from the specified job (default is file 1).";
257 " -l List attributes." = " -l List attributes.";
258 " -l Produce plain text output." = " -l Produce plain text output.";
259 " -l Run cupsd on demand." = " -l Run cupsd on demand.";
260 " -l lang[,lang,...] Specify the output language(s) (locale)." = " -l lang[,lang,…] Specify the output language(s) (locale).";
261 " -m Use the ModelName value as the filename." = " -m Use the ModelName value as the filename.";
262 " -m mime/type Set output MIME type (otherwise application/pdf)." = " -m mime/type Set output MIME type (otherwise application/pdf).";
263 " -n copies Set number of copies." = " -n copies Set number of copies.";
264 " -n count Repeat the last file the given number of times." = " -n count Repeat the last file the given number of times.";
265 " -n regex Match service name to regular expression." = " -n regex Match service name to regular expression.";
266 " -o filename.drv Set driver information file (otherwise ppdi.drv)." = " -o filename.drv Set driver information file (otherwise ppdi.drv).";
267 " -o filename.ppd[.gz] Set output file (otherwise stdout)." = " -o filename.ppd[.gz] Set output file (otherwise stdout).";
268 " -o name=value Set option(s)." = " -o name=value Set option(s).";
269 " -p Print URI if true." = " -p Print URI if true.";
270 " -p filename.ppd Set PPD file." = " -p filename.ppd Set PPD file.";
271 " -q Quietly report match via exit code." = " -q Quietly report match via exit code.";
272 " -q Run silently." = " -q Run silently.";
273 " -r True if service is remote." = " -r True if service is remote.";
274 " -r Use 'relaxed' open mode." = " -r Use ‘relaxed’ open mode.";
275 " -s Print service name if true." = " -s Print service name if true.";
276 " -s cups-files.conf Set cups-files.conf file to use." = " -s cups-files.conf Set cups-files.conf file to use.";
277 " -t Produce a test report." = " -t Produce a test report.";
278 " -t Test PPDs instead of generating them." = " -t Test PPDs instead of generating them.";
279 " -t Test the configuration file." = " -t Test the configuration file.";
280 " -t key True if the TXT record contains the key." = " -t key True if the TXT record contains the key.";
281 " -t title Set title." = " -t title Set title.";
282 " -u Remove the PPD file when finished." = " -u Remove the PPD file when finished.";
283 " -u regex Match URI to regular expression." = " -u regex Match URI to regular expression.";
284 " -v Be verbose." = " -v Be verbose.";
285 " -vv Be very verbose." = " -vv Be very verbose.";
286 " -x utility [argument ...] ;\n Execute program if true." = " -x utility [argument …] ;\n Execute program if true.";
287 " -z Compress PPD files using GNU zip." = " -z Compress PPD files using GNU zip.";
288 " IPPFIND_SERVICE_DOMAIN Domain name" = " IPPFIND_SERVICE_DOMAIN Domain name";
289 " IPPFIND_SERVICE_HOSTNAME\n Fully-qualified domain name" = " IPPFIND_SERVICE_HOSTNAME\n Fully-qualified domain name";
290 " IPPFIND_SERVICE_NAME Service instance name" = " IPPFIND_SERVICE_NAME Service instance name";
291 " IPPFIND_SERVICE_PORT Port number" = " IPPFIND_SERVICE_PORT Port number";
292 " IPPFIND_SERVICE_REGTYPE DNS-SD registration type" = " IPPFIND_SERVICE_REGTYPE DNS-SD registration type";
293 " IPPFIND_SERVICE_SCHEME URI scheme" = " IPPFIND_SERVICE_SCHEME URI scheme";
294 " IPPFIND_SERVICE_URI URI" = " IPPFIND_SERVICE_URI URI";
295 " IPPFIND_TXT_* Value of TXT record key" = " IPPFIND_TXT_* Value of TXT record key";
296 " expression --and expression\n Logical AND." = " expression --and expression\n Logical AND.";
297 " expression --or expression\n Logical OR." = " expression --or expression\n Logical OR.";
298 " expression expression Logical AND." = " expression expression Logical AND.";
299 " {service_domain} Domain name" = " {service_domain} Domain name";
300 " {service_hostname} Fully-qualified domain name" = " {service_hostname} Fully-qualified domain name";
301 " {service_name} Service instance name" = " {service_name} Service instance name";
302 " {service_port} Port number" = " {service_port} Port number";
303 " {service_regtype} DNS-SD registration type" = " {service_regtype} DNS-SD registration type";
304 " {service_scheme} URI scheme" = " {service_scheme} URI scheme";
305 " {service_uri} URI" = " {service_uri} URI";
306 " {txt_*} Value of TXT record key" = " {txt_*} Value of TXT record key";
307 " {} URI" = " {} URI";
310 "\"%s\": Bad URI value \"%s\" - %s (RFC 8011 section 5.1.6)." = "“%s”: Bad URI value “%s” - %s (RFC 8011 section 5.1.6).";
311 "\"%s\": Bad URI value \"%s\" - bad length %d (RFC 8011 section 5.1.6)." = "“%s”: Bad URI value “%s” - bad length %d (RFC 8011 section 5.1.6).";
312 "\"%s\": Bad attribute name - bad length %d (RFC 8011 section 5.1.4)." = "“%s”: Bad attribute name - bad length %d (RFC 8011 section 5.1.4).";
313 "\"%s\": Bad attribute name - invalid character (RFC 8011 section 5.1.4)." = "“%s”: Bad attribute name - invalid character (RFC 8011 section 5.1.4).";
314 "\"%s\": Bad boolen value %d (RFC 8011 section 5.1.21)." = "“%s”: Bad boolen value %d (RFC 8011 section 5.1.21).";
315 "\"%s\": Bad charset value \"%s\" - bad characters (RFC 8011 section 5.1.8)." = "“%s”: Bad charset value “%s” - bad characters (RFC 8011 section 5.1.8).";
316 "\"%s\": Bad charset value \"%s\" - bad length %d (RFC 8011 section 5.1.8)." = "“%s”: Bad charset value “%s” - bad length %d (RFC 8011 section 5.1.8).";
317 "\"%s\": Bad dateTime UTC hours %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime UTC hours %u (RFC 8011 section 5.1.15).";
318 "\"%s\": Bad dateTime UTC minutes %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime UTC minutes %u (RFC 8011 section 5.1.15).";
319 "\"%s\": Bad dateTime UTC sign '%c' (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime UTC sign ‘%c’ (RFC 8011 section 5.1.15).";
320 "\"%s\": Bad dateTime day %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime day %u (RFC 8011 section 5.1.15).";
321 "\"%s\": Bad dateTime deciseconds %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime deciseconds %u (RFC 8011 section 5.1.15).";
322 "\"%s\": Bad dateTime hours %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime hours %u (RFC 8011 section 5.1.15).";
323 "\"%s\": Bad dateTime minutes %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime minutes %u (RFC 8011 section 5.1.15).";
324 "\"%s\": Bad dateTime month %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime month %u (RFC 8011 section 5.1.15).";
325 "\"%s\": Bad dateTime seconds %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime seconds %u (RFC 8011 section 5.1.15).";
326 "\"%s\": Bad enum value %d - out of range (RFC 8011 section 5.1.5)." = "“%s”: Bad enum value %d - out of range (RFC 8011 section 5.1.5).";
327 "\"%s\": Bad keyword value \"%s\" - bad length %d (RFC 8011 section 5.1.4)." = "“%s”: Bad keyword value “%s” - bad length %d (RFC 8011 section 5.1.4).";
328 "\"%s\": Bad keyword value \"%s\" - invalid character (RFC 8011 section 5.1.4)." = "“%s”: Bad keyword value “%s” - invalid character (RFC 8011 section 5.1.4).";
329 "\"%s\": Bad mimeMediaType value \"%s\" - bad characters (RFC 8011 section 5.1.10)." = "“%s”: Bad mimeMediaType value “%s” - bad characters (RFC 8011 section 5.1.10).";
330 "\"%s\": Bad mimeMediaType value \"%s\" - bad length %d (RFC 8011 section 5.1.10)." = "“%s”: Bad mimeMediaType value “%s” - bad length %d (RFC 8011 section 5.1.10).";
331 "\"%s\": Bad name value \"%s\" - bad UTF-8 sequence (RFC 8011 section 5.1.3)." = "“%s”: Bad name value “%s” - bad UTF-8 sequence (RFC 8011 section 5.1.3).";
332 "\"%s\": Bad name value \"%s\" - bad length %d (RFC 8011 section 5.1.3)." = "“%s”: Bad name value “%s” - bad length %d (RFC 8011 section 5.1.3).";
333 "\"%s\": Bad naturalLanguage value \"%s\" - bad characters (RFC 8011 section 5.1.9)." = "“%s”: Bad naturalLanguage value “%s” - bad characters (RFC 8011 section 5.1.9).";
334 "\"%s\": Bad naturalLanguage value \"%s\" - bad length %d (RFC 8011 section 5.1.9)." = "“%s”: Bad naturalLanguage value “%s” - bad length %d (RFC 8011 section 5.1.9).";
335 "\"%s\": Bad octetString value - bad length %d (RFC 8011 section 5.1.20)." = "“%s”: Bad octetString value - bad length %d (RFC 8011 section 5.1.20).";
336 "\"%s\": Bad rangeOfInteger value %d-%d - lower greater than upper (RFC 8011 section 5.1.14)." = "“%s”: Bad rangeOfInteger value %d-%d - lower greater than upper (RFC 8011 section 5.1.14).";
337 "\"%s\": Bad resolution value %dx%d%s - bad units value (RFC 8011 section 5.1.16)." = "“%s”: Bad resolution value %dx%d%s - bad units value (RFC 8011 section 5.1.16).";
338 "\"%s\": Bad resolution value %dx%d%s - cross feed resolution must be positive (RFC 8011 section 5.1.16)." = "“%s”: Bad resolution value %dx%d%s - cross feed resolution must be positive (RFC 8011 section 5.1.16).";
339 "\"%s\": Bad resolution value %dx%d%s - feed resolution must be positive (RFC 8011 section 5.1.16)." = "“%s”: Bad resolution value %dx%d%s - feed resolution must be positive (RFC 8011 section 5.1.16).";
340 "\"%s\": Bad text value \"%s\" - bad UTF-8 sequence (RFC 8011 section 5.1.2)." = "“%s”: Bad text value “%s” - bad UTF-8 sequence (RFC 8011 section 5.1.2).";
341 "\"%s\": Bad text value \"%s\" - bad length %d (RFC 8011 section 5.1.2)." = "“%s”: Bad text value “%s” - bad length %d (RFC 8011 section 5.1.2).";
342 "\"%s\": Bad uriScheme value \"%s\" - bad characters (RFC 8011 section 5.1.7)." = "“%s”: Bad uriScheme value “%s” - bad characters (RFC 8011 section 5.1.7).";
343 "\"%s\": Bad uriScheme value \"%s\" - bad length %d (RFC 8011 section 5.1.7)." = "“%s”: Bad uriScheme value “%s” - bad length %d (RFC 8011 section 5.1.7).";
344 "%-7s %-7.7s %-7d %-31.31s %.0f bytes" = "%-7s %-7.7s %-7d %-31.31s %.0f bytes";
345 "%d x %d mm" = "%d x %d mm";
346 "%g x %g \"" = "%g x %g ″";
347 "%s (%s)" = "%s (%s)";
348 "%s (%s, %s)" = "%s (%s, %s)";
349 "%s (Borderless)" = "%s (Borderless)";
350 "%s (Borderless, %s)" = "%s (Borderless, %s)";
351 "%s (Borderless, %s, %s)" = "%s (Borderless, %s, %s)";
352 "%s accepting requests since %s" = "%s accepting requests since %s";
353 "%s cannot be changed." = "%s cannot be changed.";
354 "%s is not implemented by the CUPS version of lpc." = "%s is not implemented by the CUPS version of lpc.";
355 "%s is not ready" = "%s is not ready";
356 "%s is ready" = "%s is ready";
357 "%s is ready and printing" = "%s is ready and printing";
358 "%s job-id user title copies options [file]" = "%s job-id user title copies options [file]";
359 "%s not accepting requests since %s -" = "%s not accepting requests since %s -";
360 "%s not supported." = "%s not supported.";
361 "%s/%s accepting requests since %s" = "%s/%s accepting requests since %s";
362 "%s/%s not accepting requests since %s -" = "%s/%s not accepting requests since %s -";
363 "%s: %-33.33s [job %d localhost]" = "%s: %-33.33s [job %d localhost]";
364 // TRANSLATORS: Message is "subject: error"
366 "%s: %s failed: %s" = "%s: %s failed: %s";
367 "%s: Bad printer URI \"%s\"." = "%s: Bad printer URI “%s”.";
368 "%s: Bad version %s for \"-V\"." = "%s: Bad version %s for “-V”.";
369 "%s: Don't know what to do." = "%s: Don’t know what to do.";
370 "%s: Error - %s" = "%s: Error - %s";
371 "%s: Error - %s environment variable names non-existent destination \"%s\"." = "%s: Error - %s environment variable names non-existent destination “%s”.";
372 "%s: Error - add '/version=1.1' to server name." = "%s: Error - add ‘/version=1.1’ to server name.";
373 "%s: Error - bad job ID." = "%s: Error - bad job ID.";
374 "%s: Error - cannot print files and alter jobs simultaneously." = "%s: Error - cannot print files and alter jobs simultaneously.";
375 "%s: Error - cannot print from stdin if files or a job ID are provided." = "%s: Error - cannot print from stdin if files or a job ID are provided.";
376 "%s: Error - copies must be 1 or more." = "%s: Error - copies must be 1 or more.";
377 "%s: Error - expected character set after \"-S\" option." = "%s: Error - expected character set after “-S” option.";
378 "%s: Error - expected content type after \"-T\" option." = "%s: Error - expected content type after “-T” option.";
379 "%s: Error - expected copies after \"-#\" option." = "%s: Error - expected copies after “-#” option.";
380 "%s: Error - expected copies after \"-n\" option." = "%s: Error - expected copies after “-n” option.";
381 "%s: Error - expected destination after \"-P\" option." = "%s: Error - expected destination after “-P” option.";
382 "%s: Error - expected destination after \"-d\" option." = "%s: Error - expected destination after “-d” option.";
383 "%s: Error - expected form after \"-f\" option." = "%s: Error - expected form after “-f” option.";
384 "%s: Error - expected hold name after \"-H\" option." = "%s: Error - expected hold name after “-H” option.";
385 "%s: Error - expected hostname after \"-H\" option." = "%s: Error - expected hostname after “-H” option.";
386 "%s: Error - expected hostname after \"-h\" option." = "%s: Error - expected hostname after “-h” option.";
387 "%s: Error - expected mode list after \"-y\" option." = "%s: Error - expected mode list after “-y” option.";
388 "%s: Error - expected name after \"-%c\" option." = "%s: Error - expected name after “-%c” option.";
389 "%s: Error - expected option=value after \"-o\" option." = "%s: Error - expected option=value after “-o” option.";
390 "%s: Error - expected page list after \"-P\" option." = "%s: Error - expected page list after “-P” option.";
391 "%s: Error - expected priority after \"-%c\" option." = "%s: Error - expected priority after “-%c” option.";
392 "%s: Error - expected reason text after \"-r\" option." = "%s: Error - expected reason text after “-r” option.";
393 "%s: Error - expected title after \"-t\" option." = "%s: Error - expected title after “-t” option.";
394 "%s: Error - expected username after \"-U\" option." = "%s: Error - expected username after “-U” option.";
395 "%s: Error - expected username after \"-u\" option." = "%s: Error - expected username after “-u” option.";
396 "%s: Error - expected value after \"-%c\" option." = "%s: Error - expected value after “-%c” option.";
397 "%s: Error - need \"completed\", \"not-completed\", or \"all\" after \"-W\" option." = "%s: Error - need “completed”, “not-completed”, or “all” after “-W” option.";
398 "%s: Error - no default destination available." = "%s: Error - no default destination available.";
399 "%s: Error - priority must be between 1 and 100." = "%s: Error - priority must be between 1 and 100.";
400 "%s: Error - scheduler not responding." = "%s: Error - scheduler not responding.";
401 "%s: Error - too many files - \"%s\"." = "%s: Error - too many files - “%s”.";
402 "%s: Error - unable to access \"%s\" - %s" = "%s: Error - unable to access “%s” - %s";
403 "%s: Error - unable to queue from stdin - %s." = "%s: Error - unable to queue from stdin - %s.";
404 "%s: Error - unknown destination \"%s\"." = "%s: Error - unknown destination “%s”.";
405 "%s: Error - unknown destination \"%s/%s\"." = "%s: Error - unknown destination “%s/%s”.";
406 "%s: Error - unknown option \"%c\"." = "%s: Error - unknown option “%c”.";
407 "%s: Error - unknown option \"%s\"." = "%s: Error - unknown option “%s”.";
408 "%s: Expected job ID after \"-i\" option." = "%s: Expected job ID after “-i” option.";
409 "%s: Invalid destination name in list \"%s\"." = "%s: Invalid destination name in list “%s”.";
410 "%s: Invalid filter string \"%s\"." = "%s: Invalid filter string “%s”.";
411 "%s: Missing filename for \"-P\"." = "%s: Missing filename for “-P”.";
412 "%s: Missing timeout for \"-T\"." = "%s: Missing timeout for “-T”.";
413 "%s: Missing version for \"-V\"." = "%s: Missing version for “-V”.";
414 "%s: Need job ID (\"-i jobid\") before \"-H restart\"." = "%s: Need job ID (“-i jobid”) before “-H restart”.";
415 "%s: No filter to convert from %s/%s to %s/%s." = "%s: No filter to convert from %s/%s to %s/%s.";
416 "%s: Operation failed: %s" = "%s: Operation failed: %s";
417 "%s: Sorry, no encryption support." = "%s: Sorry, no encryption support.";
418 "%s: Unable to connect to \"%s:%d\": %s" = "%s: Unable to connect to “%s:%d”: %s";
419 "%s: Unable to connect to server." = "%s: Unable to connect to server.";
420 "%s: Unable to contact server." = "%s: Unable to contact server.";
421 "%s: Unable to create PPD file: %s" = "%s: Unable to create PPD file: %s";
422 "%s: Unable to determine MIME type of \"%s\"." = "%s: Unable to determine MIME type of “%s”.";
423 "%s: Unable to open \"%s\": %s" = "%s: Unable to open “%s”: %s";
424 "%s: Unable to open %s: %s" = "%s: Unable to open %s: %s";
425 "%s: Unable to open PPD file: %s on line %d." = "%s: Unable to open PPD file: %s on line %d.";
426 "%s: Unable to read MIME database from \"%s\" or \"%s\"." = "%s: Unable to read MIME database from “%s” or “%s”.";
427 "%s: Unable to resolve \"%s\"." = "%s: Unable to resolve “%s”.";
428 "%s: Unknown argument \"%s\"." = "%s: Unknown argument “%s”.";
429 "%s: Unknown destination \"%s\"." = "%s: Unknown destination “%s”.";
430 "%s: Unknown destination MIME type %s/%s." = "%s: Unknown destination MIME type %s/%s.";
431 "%s: Unknown option \"%c\"." = "%s: Unknown option “%c”.";
432 "%s: Unknown option \"%s\"." = "%s: Unknown option “%s”.";
433 "%s: Unknown option \"-%c\"." = "%s: Unknown option “-%c”.";
434 "%s: Unknown source MIME type %s/%s." = "%s: Unknown source MIME type %s/%s.";
435 "%s: Warning - \"%c\" format modifier not supported - output may not be correct." = "%s: Warning - “%c” format modifier not supported - output may not be correct.";
436 "%s: Warning - character set option ignored." = "%s: Warning - character set option ignored.";
437 "%s: Warning - content type option ignored." = "%s: Warning - content type option ignored.";
438 "%s: Warning - form option ignored." = "%s: Warning - form option ignored.";
439 "%s: Warning - mode option ignored." = "%s: Warning - mode option ignored.";
476 "/etc/cups/lpoptions file names default destination that does not exist." = "/etc/cups/lpoptions file names default destination that does not exist.";
479 "1 inch/sec." = "1 inch/sec.";
480 "1.25x0.25\"" = "1.25x0.25″";
481 "1.25x2.25\"" = "1.25x2.25″";
482 "1.5 inch/sec." = "1.5 inch/sec.";
483 "1.50x0.25\"" = "1.50x0.25″";
484 "1.50x0.50\"" = "1.50x0.50″";
485 "1.50x1.00\"" = "1.50x1.00″";
486 "1.50x2.00\"" = "1.50x2.00″";
488 "10 inches/sec." = "10 inches/sec.";
489 "10 x 11" = "10 x 11";
490 "10 x 13" = "10 x 13";
491 "10 x 14" = "10 x 14";
493 "100 mm/sec." = "100 mm/sec.";
496 "11 inches/sec." = "11 inches/sec.";
500 "12 inches/sec." = "12 inches/sec.";
501 "12 x 11" = "12 x 11";
503 "120 mm/sec." = "120 mm/sec.";
504 "120x60dpi" = "120x60dpi";
505 "120x72dpi" = "120x72dpi";
510 "15 mm/sec." = "15 mm/sec.";
511 "15 x 11" = "15 x 11";
512 "150 mm/sec." = "150 mm/sec.";
520 "2 inches/sec." = "2 inches/sec.";
521 "2-Sided Printing" = "2-Sided Printing";
522 "2.00x0.37\"" = "2.00x0.37″";
523 "2.00x0.50\"" = "2.00x0.50″";
524 "2.00x1.00\"" = "2.00x1.00″";
525 "2.00x1.25\"" = "2.00x1.25″";
526 "2.00x2.00\"" = "2.00x2.00″";
527 "2.00x3.00\"" = "2.00x3.00″";
528 "2.00x4.00\"" = "2.00x4.00″";
529 "2.00x5.50\"" = "2.00x5.50″";
530 "2.25x0.50\"" = "2.25x0.50″";
531 "2.25x1.25\"" = "2.25x1.25″";
532 "2.25x4.00\"" = "2.25x4.00″";
533 "2.25x5.50\"" = "2.25x5.50″";
534 "2.38x5.50\"" = "2.38x5.50″";
535 "2.5 inches/sec." = "2.5 inches/sec.";
536 "2.50x1.00\"" = "2.50x1.00″";
537 "2.50x2.00\"" = "2.50x2.00″";
538 "2.75x1.25\"" = "2.75x1.25″";
539 "2.9 x 1\"" = "2.9 x 1″";
541 "20 mm/sec." = "20 mm/sec.";
542 "200 mm/sec." = "200 mm/sec.";
548 "24-Pin Series" = "24-Pin Series";
549 "240x72dpi" = "240x72dpi";
551 "250 mm/sec." = "250 mm/sec.";
557 "3 inches/sec." = "3 inches/sec.";
559 "3.00x1.00\"" = "3.00x1.00″";
560 "3.00x1.25\"" = "3.00x1.25″";
561 "3.00x2.00\"" = "3.00x2.00″";
562 "3.00x3.00\"" = "3.00x3.00″";
563 "3.00x5.00\"" = "3.00x5.00″";
564 "3.25x2.00\"" = "3.25x2.00″";
565 "3.25x5.00\"" = "3.25x5.00″";
566 "3.25x5.50\"" = "3.25x5.50″";
567 "3.25x5.83\"" = "3.25x5.83″";
568 "3.25x7.83\"" = "3.25x7.83″";
569 "3.5 x 5" = "3.5 x 5";
570 "3.5\" Disk" = "3.5″ Disk";
571 "3.50x1.00\"" = "3.50x1.00″";
573 "30 mm/sec." = "30 mm/sec.";
574 "300 mm/sec." = "300 mm/sec.";
578 "360x180dpi" = "360x180dpi";
580 "4 inches/sec." = "4 inches/sec.";
581 "4.00x1.00\"" = "4.00x1.00″";
582 "4.00x13.00\"" = "4.00x13.00″";
583 "4.00x2.00\"" = "4.00x2.00″";
584 "4.00x2.50\"" = "4.00x2.50″";
585 "4.00x3.00\"" = "4.00x3.00″";
586 "4.00x4.00\"" = "4.00x4.00″";
587 "4.00x5.00\"" = "4.00x5.00″";
588 "4.00x6.00\"" = "4.00x6.00″";
589 "4.00x6.50\"" = "4.00x6.50″";
591 "40 mm/sec." = "40 mm/sec.";
594 "5 inches/sec." = "5 inches/sec.";
599 "6 inches/sec." = "6 inches/sec.";
600 "6.00x1.00\"" = "6.00x1.00″";
601 "6.00x2.00\"" = "6.00x2.00″";
602 "6.00x3.00\"" = "6.00x3.00″";
603 "6.00x4.00\"" = "6.00x4.00″";
604 "6.00x5.00\"" = "6.00x5.00″";
605 "6.00x6.00\"" = "6.00x6.00″";
606 "6.00x6.50\"" = "6.00x6.50″";
608 "60 mm/sec." = "60 mm/sec.";
611 "60x72dpi" = "60x72dpi";
614 "7 inches/sec." = "7 inches/sec.";
619 "8 inches/sec." = "8 inches/sec.";
621 "8.00x1.00\"" = "8.00x1.00″";
622 "8.00x2.00\"" = "8.00x2.00″";
623 "8.00x3.00\"" = "8.00x3.00″";
624 "8.00x4.00\"" = "8.00x4.00″";
625 "8.00x5.00\"" = "8.00x5.00″";
626 "8.00x6.00\"" = "8.00x6.00″";
627 "8.00x6.50\"" = "8.00x6.50″";
629 "80 mm/sec." = "80 mm/sec.";
632 "9 inches/sec." = "9 inches/sec.";
635 "9-Pin Series" = "9-Pin Series";
638 "?Invalid help command unknown." = "?Invalid help command unknown.";
639 "A Samba password is required to export printer drivers" = "A Samba password is required to export printer drivers";
640 "A Samba username is required to export printer drivers" = "A Samba username is required to export printer drivers";
641 "A class named \"%s\" already exists." = "A class named “%s” already exists.";
642 "A printer named \"%s\" already exists." = "A printer named “%s” already exists.";
644 "A0 Long Edge" = "A0 Long Edge";
646 "A1 Long Edge" = "A1 Long Edge";
649 "A2 Long Edge" = "A2 Long Edge";
651 "A3 Long Edge" = "A3 Long Edge";
652 "A3 Oversize" = "A3 Oversize";
653 "A3 Oversize Long Edge" = "A3 Oversize Long Edge";
655 "A4 Long Edge" = "A4 Long Edge";
656 "A4 Oversize" = "A4 Oversize";
657 "A4 Small" = "A4 Small";
659 "A5 Long Edge" = "A5 Long Edge";
660 "A5 Oversize" = "A5 Oversize";
662 "A6 Long Edge" = "A6 Long Edge";
672 "ARCH C Long Edge" = "ARCH C Long Edge";
674 "ARCH D Long Edge" = "ARCH D Long Edge";
676 "ARCH E Long Edge" = "ARCH E Long Edge";
677 "Accept Jobs" = "Accept Jobs";
678 "Accepted" = "Accepted";
679 "Add Class" = "Add Class";
680 "Add Printer" = "Add Printer";
681 "Address" = "Address";
682 "Administration" = "Administration";
684 "AppSocket/HP JetDirect" = "AppSocket/HP JetDirect";
685 "Applicator" = "Applicator";
686 "Attempt to set %s printer-state to bad value %d." = "Attempt to set %s printer-state to bad value %d.";
687 "Attribute \"%s\" is in the wrong group." = "Attribute “%s” is in the wrong group.";
688 "Attribute \"%s\" is the wrong value type." = "Attribute “%s” is the wrong value type.";
689 "Attribute groups are out of order (%x < %x)." = "Attribute groups are out of order (%x < %x).";
697 "B5 Oversize" = "B5 Oversize";
702 "Bad \"printer-id\" value %d." = "Bad “printer-id” value %d.";
703 "Bad 'document-format' value \"%s\"." = "Bad ‘document-format’ value “%s”.";
704 "Bad NULL dests pointer" = "Bad NULL dests pointer";
705 "Bad OpenGroup" = "Bad OpenGroup";
706 "Bad OpenUI/JCLOpenUI" = "Bad OpenUI/JCLOpenUI";
707 "Bad OrderDependency" = "Bad OrderDependency";
708 "Bad PPD cache file." = "Bad PPD cache file.";
709 "Bad PPD file." = "Bad PPD file.";
710 "Bad Request" = "Bad Request";
711 "Bad SNMP version number" = "Bad SNMP version number";
712 "Bad UIConstraints" = "Bad UIConstraints";
713 "Bad arguments to function" = "Bad arguments to function";
714 "Bad copies value %d." = "Bad copies value %d.";
715 "Bad custom parameter" = "Bad custom parameter";
716 "Bad device-uri \"%s\"." = "Bad device-uri “%s”.";
717 "Bad device-uri scheme \"%s\"." = "Bad device-uri scheme “%s”.";
718 "Bad document-format \"%s\"." = "Bad document-format “%s”.";
719 "Bad document-format-default \"%s\"." = "Bad document-format-default “%s”.";
720 "Bad filename buffer" = "Bad filename buffer";
721 "Bad hostname/address in URI" = "Bad hostname/address in URI";
722 "Bad job-name value: %s" = "Bad job-name value: %s";
723 "Bad job-name value: Wrong type or count." = "Bad job-name value: Wrong type or count.";
724 "Bad job-priority value." = "Bad job-priority value.";
725 "Bad job-sheets value \"%s\"." = "Bad job-sheets value “%s”.";
726 "Bad job-sheets value type." = "Bad job-sheets value type.";
727 "Bad job-state value." = "Bad job-state value.";
728 "Bad job-uri \"%s\"." = "Bad job-uri “%s”.";
729 "Bad notify-pull-method \"%s\"." = "Bad notify-pull-method “%s”.";
730 "Bad notify-recipient-uri \"%s\"." = "Bad notify-recipient-uri “%s”.";
731 "Bad number-up value %d." = "Bad number-up value %d.";
732 "Bad option + choice on line %d." = "Bad option + choice on line %d.";
733 "Bad page-ranges values %d-%d." = "Bad page-ranges values %d-%d.";
734 "Bad port number in URI" = "Bad port number in URI";
735 "Bad port-monitor \"%s\"." = "Bad port-monitor “%s”.";
736 "Bad printer-state value %d." = "Bad printer-state value %d.";
737 "Bad printer-uri." = "Bad printer-uri.";
738 "Bad request ID %d." = "Bad request ID %d.";
739 "Bad request version number %d.%d." = "Bad request version number %d.%d.";
740 "Bad requesting-user-name value: %s" = "Bad requesting-user-name value: %s";
741 "Bad resource in URI" = "Bad resource in URI";
742 "Bad scheme in URI" = "Bad scheme in URI";
743 "Bad username in URI" = "Bad username in URI";
744 "Bad value string" = "Bad value string";
745 "Bad/empty URI" = "Bad/empty URI";
746 "Banners" = "Banners";
747 "Bond Paper" = "Bond Paper";
748 "Booklet" = "Booklet";
749 "Boolean expected for waiteof option \"%s\"." = "Boolean expected for waiteof option “%s”.";
750 "Buffer overflow detected, aborting." = "Buffer overflow detected, aborting.";
752 "CPCL Label Printer" = "CPCL Label Printer";
753 "Cancel Jobs" = "Cancel Jobs";
754 "Canceling print job." = "Canceling print job.";
755 "Cannot change printer-is-shared for remote queues." = "Cannot change printer-is-shared for remote queues.";
756 "Cannot share a remote Kerberized printer." = "Cannot share a remote Kerberized printer.";
757 "Cassette" = "Cassette";
758 "Change Settings" = "Change Settings";
759 "Character set \"%s\" not supported." = "Character set “%s” not supported.";
760 "Classes" = "Classes";
761 "Clean Print Heads" = "Clean Print Heads";
762 "Close-Job doesn't support the job-uri attribute." = "Close-Job doesn’t support the job-uri attribute.";
764 "Color Mode" = "Color Mode";
765 "Commands may be abbreviated. Commands are:\n\nexit help quit status ?" = "Commands may be abbreviated. Commands are:\n\nexit help quit status ?";
766 "Community name uses indefinite length" = "Community name uses indefinite length";
767 "Connected to printer." = "Connected to printer.";
768 "Connecting to printer." = "Connecting to printer.";
769 "Continue" = "Continue";
770 "Continuous" = "Continuous";
771 "Control file sent successfully." = "Control file sent successfully.";
772 "Copying print data." = "Copying print data.";
773 "Created" = "Created";
774 "Credentials do not validate against site CA certificate." = "Credentials do not validate against site CA certificate.";
775 "Credentials have expired." = "Credentials have expired.";
777 "CustominCutInterval" = "CustominCutInterval";
778 "CustominTearInterval" = "CustominTearInterval";
782 "Darkness" = "Darkness";
783 "Data file sent successfully." = "Data file sent successfully.";
784 "Deep Color" = "Deep Color";
785 "Deep Gray" = "Deep Gray";
786 "Delete Class" = "Delete Class";
787 "Delete Printer" = "Delete Printer";
788 "DeskJet Series" = "DeskJet Series";
789 "Destination \"%s\" is not accepting jobs." = "Destination “%s” is not accepting jobs.";
790 "Device CMYK" = "Device CMYK";
791 "Device Gray" = "Device Gray";
792 "Device RGB" = "Device RGB";
793 "Device: uri = %s\n class = %s\n info = %s\n make-and-model = %s\n device-id = %s\n location = %s" = "Device: uri = %s\n class = %s\n info = %s\n make-and-model = %s\n device-id = %s\n location = %s";
794 "Direct Thermal Media" = "Direct Thermal Media";
795 "Directory \"%s\" contains a relative path." = "Directory “%s” contains a relative path.";
796 "Directory \"%s\" has insecure permissions (0%o/uid=%d/gid=%d)." = "Directory “%s” has insecure permissions (0%o/uid=%d/gid=%d).";
797 "Directory \"%s\" is a file." = "Directory “%s” is a file.";
798 "Directory \"%s\" not available: %s" = "Directory “%s” not available: %s";
799 "Directory \"%s\" permissions OK (0%o/uid=%d/gid=%d)." = "Directory “%s” permissions OK (0%o/uid=%d/gid=%d).";
800 "Disabled" = "Disabled";
801 "Document #%d does not exist in job #%d." = "Document #%d does not exist in job #%d.";
803 "Duplexer" = "Duplexer";
805 "EPL1 Label Printer" = "EPL1 Label Printer";
806 "EPL2 Label Printer" = "EPL2 Label Printer";
807 "Edit Configuration File" = "Edit Configuration File";
808 "Empty PPD file." = "Empty PPD file.";
809 "Encryption is not supported." = "Encryption is not supported.";
810 // TRANSLATORS: Banner/cover sheet after the print job.
811 "Ending Banner" = "Ending Banner";
812 "English" = "English";
813 "Enter your username and password or the root username and password to access this page. If you are using Kerberos authentication, make sure you have a valid Kerberos ticket." = "Enter your username and password or the root username and password to access this page. If you are using Kerberos authentication, make sure you have a valid Kerberos ticket.";
814 "Envelope #10" = "Envelope #10";
815 "Envelope #11" = "Envelope #11";
816 "Envelope #12" = "Envelope #12";
817 "Envelope #14" = "Envelope #14";
818 "Envelope #9" = "Envelope #9";
819 "Envelope B4" = "Envelope B4";
820 "Envelope B5" = "Envelope B5";
821 "Envelope B6" = "Envelope B6";
822 "Envelope C0" = "Envelope C0";
823 "Envelope C1" = "Envelope C1";
824 "Envelope C2" = "Envelope C2";
825 "Envelope C3" = "Envelope C3";
826 "Envelope C4" = "Envelope C4";
827 "Envelope C5" = "Envelope C5";
828 "Envelope C6" = "Envelope C6";
829 "Envelope C65" = "Envelope C65";
830 "Envelope C7" = "Envelope C7";
831 "Envelope Choukei 3" = "Envelope Choukei 3";
832 "Envelope Choukei 3 Long Edge" = "Envelope Choukei 3 Long Edge";
833 "Envelope Choukei 4" = "Envelope Choukei 4";
834 "Envelope Choukei 4 Long Edge" = "Envelope Choukei 4 Long Edge";
835 "Envelope DL" = "Envelope DL";
836 "Envelope Feed" = "Envelope Feed";
837 "Envelope Invite" = "Envelope Invite";
838 "Envelope Italian" = "Envelope Italian";
839 "Envelope Kaku2" = "Envelope Kaku2";
840 "Envelope Kaku2 Long Edge" = "Envelope Kaku2 Long Edge";
841 "Envelope Kaku3" = "Envelope Kaku3";
842 "Envelope Kaku3 Long Edge" = "Envelope Kaku3 Long Edge";
843 "Envelope Monarch" = "Envelope Monarch";
844 "Envelope PRC1" = "Envelope PRC1";
845 "Envelope PRC1 Long Edge" = "Envelope PRC1 Long Edge";
846 "Envelope PRC10" = "Envelope PRC10";
847 "Envelope PRC10 Long Edge" = "Envelope PRC10 Long Edge";
848 "Envelope PRC2" = "Envelope PRC2";
849 "Envelope PRC2 Long Edge" = "Envelope PRC2 Long Edge";
850 "Envelope PRC3" = "Envelope PRC3";
851 "Envelope PRC3 Long Edge" = "Envelope PRC3 Long Edge";
852 "Envelope PRC4" = "Envelope PRC4";
853 "Envelope PRC4 Long Edge" = "Envelope PRC4 Long Edge";
854 "Envelope PRC5 Long Edge" = "Envelope PRC5 Long Edge";
855 "Envelope PRC5PRC5" = "Envelope PRC5PRC5";
856 "Envelope PRC6" = "Envelope PRC6";
857 "Envelope PRC6 Long Edge" = "Envelope PRC6 Long Edge";
858 "Envelope PRC7" = "Envelope PRC7";
859 "Envelope PRC7 Long Edge" = "Envelope PRC7 Long Edge";
860 "Envelope PRC8" = "Envelope PRC8";
861 "Envelope PRC8 Long Edge" = "Envelope PRC8 Long Edge";
862 "Envelope PRC9" = "Envelope PRC9";
863 "Envelope PRC9 Long Edge" = "Envelope PRC9 Long Edge";
864 "Envelope Personal" = "Envelope Personal";
865 "Envelope You4" = "Envelope You4";
866 "Envelope You4 Long Edge" = "Envelope You4 Long Edge";
867 "Environment Variables:" = "Environment Variables:";
869 "Error Policy" = "Error Policy";
870 "Error reading raster data." = "Error reading raster data.";
871 "Error sending raster data." = "Error sending raster data.";
872 "Error: need hostname after \"-h\" option." = "Error: need hostname after “-h” option.";
873 "European Fanfold" = "European Fanfold";
874 "European Fanfold Legal" = "European Fanfold Legal";
875 "Every 10 Labels" = "Every 10 Labels";
876 "Every 2 Labels" = "Every 2 Labels";
877 "Every 3 Labels" = "Every 3 Labels";
878 "Every 4 Labels" = "Every 4 Labels";
879 "Every 5 Labels" = "Every 5 Labels";
880 "Every 6 Labels" = "Every 6 Labels";
881 "Every 7 Labels" = "Every 7 Labels";
882 "Every 8 Labels" = "Every 8 Labels";
883 "Every 9 Labels" = "Every 9 Labels";
884 "Every Label" = "Every Label";
885 "Executive" = "Executive";
886 "Expectation Failed" = "Expectation Failed";
887 "Export Printers to Samba" = "Export Printers to Samba";
888 "Expressions:" = "Expressions:";
890 "Fast Grayscale" = "Fast Grayscale";
891 "File \"%s\" contains a relative path." = "File “%s” contains a relative path.";
892 "File \"%s\" has insecure permissions (0%o/uid=%d/gid=%d)." = "File “%s” has insecure permissions (0%o/uid=%d/gid=%d).";
893 "File \"%s\" is a directory." = "File “%s” is a directory.";
894 "File \"%s\" not available: %s" = "File “%s” not available: %s";
895 "File \"%s\" permissions OK (0%o/uid=%d/gid=%d)." = "File “%s” permissions OK (0%o/uid=%d/gid=%d).";
896 "File Folder" = "File Folder";
897 "File device URIs have been disabled. To enable, see the FileDevice directive in \"%s/cups-files.conf\"." = "File device URIs have been disabled. To enable, see the FileDevice directive in “%s/cups-files.conf”.";
898 "Finished page %d." = "Finished page %d.";
899 "Finishing Preset" = "Finishing Preset";
902 "Forbidden" = "Forbidden";
904 "General" = "General";
905 "Generic" = "Generic";
906 "Get-Response-PDU uses indefinite length" = "Get-Response-PDU uses indefinite length";
907 "Glossy Paper" = "Glossy Paper";
908 "Got a printer-uri attribute but no job-id." = "Got a printer-uri attribute but no job-id.";
909 "Grayscale" = "Grayscale";
911 "Hanging Folder" = "Hanging Folder";
912 "Hash buffer too small." = "Hash buffer too small.";
913 "Help file not in index." = "Help file not in index.";
915 "IPP 1setOf attribute with incompatible value tags." = "IPP 1setOf attribute with incompatible value tags.";
916 "IPP attribute has no name." = "IPP attribute has no name.";
917 "IPP attribute is not a member of the message." = "IPP attribute is not a member of the message.";
918 "IPP begCollection value not 0 bytes." = "IPP begCollection value not 0 bytes.";
919 "IPP boolean value not 1 byte." = "IPP boolean value not 1 byte.";
920 "IPP date value not 11 bytes." = "IPP date value not 11 bytes.";
921 "IPP endCollection value not 0 bytes." = "IPP endCollection value not 0 bytes.";
922 "IPP enum value not 4 bytes." = "IPP enum value not 4 bytes.";
923 "IPP extension tag larger than 0x7FFFFFFF." = "IPP extension tag larger than 0x7FFFFFFF.";
924 "IPP integer value not 4 bytes." = "IPP integer value not 4 bytes.";
925 "IPP language length overflows value." = "IPP language length overflows value.";
926 "IPP language length too large." = "IPP language length too large.";
927 "IPP member name is not empty." = "IPP member name is not empty.";
928 "IPP memberName value is empty." = "IPP memberName value is empty.";
929 "IPP memberName with no attribute." = "IPP memberName with no attribute.";
930 "IPP name larger than 32767 bytes." = "IPP name larger than 32767 bytes.";
931 "IPP nameWithLanguage value less than minimum 4 bytes." = "IPP nameWithLanguage value less than minimum 4 bytes.";
932 "IPP octetString length too large." = "IPP octetString length too large.";
933 "IPP rangeOfInteger value not 8 bytes." = "IPP rangeOfInteger value not 8 bytes.";
934 "IPP resolution value not 9 bytes." = "IPP resolution value not 9 bytes.";
935 "IPP string length overflows value." = "IPP string length overflows value.";
936 "IPP textWithLanguage value less than minimum 4 bytes." = "IPP textWithLanguage value less than minimum 4 bytes.";
937 "IPP value larger than 32767 bytes." = "IPP value larger than 32767 bytes.";
938 "ISOLatin1" = "ISOLatin1";
939 "Illegal control character" = "Illegal control character";
940 "Illegal main keyword string" = "Illegal main keyword string";
941 "Illegal option keyword string" = "Illegal option keyword string";
942 "Illegal translation string" = "Illegal translation string";
943 "Illegal whitespace character" = "Illegal whitespace character";
944 "Installable Options" = "Installable Options";
945 "Installed" = "Installed";
946 "IntelliBar Label Printer" = "IntelliBar Label Printer";
947 "Intellitech" = "Intellitech";
948 "Internal Server Error" = "Internal Server Error";
949 "Internal error" = "Internal error";
950 "Internet Postage 2-Part" = "Internet Postage 2-Part";
951 "Internet Postage 3-Part" = "Internet Postage 3-Part";
952 "Internet Printing Protocol" = "Internet Printing Protocol";
953 "Invalid media name arguments." = "Invalid media name arguments.";
954 "Invalid media size." = "Invalid media size.";
955 "Invalid ppd-name value." = "Invalid ppd-name value.";
956 "Invalid printer command \"%s\"." = "Invalid printer command “%s”.";
960 "JIS B10" = "JIS B10";
964 "JIS B4 Long Edge" = "JIS B4 Long Edge";
966 "JIS B5 Long Edge" = "JIS B5 Long Edge";
968 "JIS B6 Long Edge" = "JIS B6 Long Edge";
972 "Job #%d cannot be restarted - no files." = "Job #%d cannot be restarted - no files.";
973 "Job #%d does not exist." = "Job #%d does not exist.";
974 "Job #%d is already aborted - can't cancel." = "Job #%d is already aborted - can’t cancel.";
975 "Job #%d is already canceled - can't cancel." = "Job #%d is already canceled - can’t cancel.";
976 "Job #%d is already completed - can't cancel." = "Job #%d is already completed - can’t cancel.";
977 "Job #%d is finished and cannot be altered." = "Job #%d is finished and cannot be altered.";
978 "Job #%d is not complete." = "Job #%d is not complete.";
979 "Job #%d is not held for authentication." = "Job #%d is not held for authentication.";
980 "Job #%d is not held." = "Job #%d is not held.";
981 "Job Completed" = "Job Completed";
982 "Job Created" = "Job Created";
983 "Job Options Changed" = "Job Options Changed";
984 "Job Stopped" = "Job Stopped";
985 "Job is completed and cannot be changed." = "Job is completed and cannot be changed.";
986 "Job operation failed" = "Job operation failed";
987 "Job state cannot be changed." = "Job state cannot be changed.";
988 "Job subscriptions cannot be renewed." = "Job subscriptions cannot be renewed.";
990 "LPD/LPR Host or Printer" = "LPD/LPR Host or Printer";
991 "LPDEST environment variable names default destination that does not exist." = "LPDEST environment variable names default destination that does not exist.";
992 "Label Printer" = "Label Printer";
993 "Label Top" = "Label Top";
994 "Language \"%s\" not supported." = "Language “%s” not supported.";
995 "Large Address" = "Large Address";
996 "LaserJet Series PCL 4/5" = "LaserJet Series PCL 4/5";
997 "Letter Oversize" = "Letter Oversize";
998 "Letter Oversize Long Edge" = "Letter Oversize Long Edge";
1000 "Line longer than the maximum allowed (255 characters)" = "Line longer than the maximum allowed (255 characters)";
1001 "List Available Printers" = "List Available Printers";
1002 "Local printer created." = "Local printer created.";
1003 "Long-Edge (Portrait)" = "Long-Edge (Portrait)";
1004 "Looking for printer." = "Looking for printer.";
1005 "Manual Feed" = "Manual Feed";
1006 "Media Size" = "Media Size";
1007 "Media Source" = "Media Source";
1008 "Media Tracking" = "Media Tracking";
1009 "Media Type" = "Media Type";
1010 "Medium" = "Medium";
1011 "Memory allocation error" = "Memory allocation error";
1012 "Missing CloseGroup" = "Missing CloseGroup";
1013 "Missing PPD-Adobe-4.x header" = "Missing PPD-Adobe-4.x header";
1014 "Missing asterisk in column 1" = "Missing asterisk in column 1";
1015 "Missing document-number attribute." = "Missing document-number attribute.";
1016 "Missing double quote on line %d." = "Missing double quote on line %d.";
1017 "Missing form variable" = "Missing form variable";
1018 "Missing last-document attribute in request." = "Missing last-document attribute in request.";
1019 "Missing media or media-col." = "Missing media or media-col.";
1020 "Missing media-size in media-col." = "Missing media-size in media-col.";
1021 "Missing notify-subscription-ids attribute." = "Missing notify-subscription-ids attribute.";
1022 "Missing option keyword" = "Missing option keyword";
1023 "Missing requesting-user-name attribute." = "Missing requesting-user-name attribute.";
1024 "Missing required attribute \"%s\"." = "Missing required attribute “%s”.";
1025 "Missing required attributes." = "Missing required attributes.";
1026 "Missing resource in URI" = "Missing resource in URI";
1027 "Missing scheme in URI" = "Missing scheme in URI";
1028 "Missing value on line %d." = "Missing value on line %d.";
1029 "Missing value string" = "Missing value string";
1030 "Missing x-dimension in media-size." = "Missing x-dimension in media-size.";
1031 "Missing y-dimension in media-size." = "Missing y-dimension in media-size.";
1032 "Model: name = %s\n natural_language = %s\n make-and-model = %s\n device-id = %s" = "Model: name = %s\n natural_language = %s\n make-and-model = %s\n device-id = %s";
1033 "Modifiers:" = "Modifiers:";
1034 "Modify Class" = "Modify Class";
1035 "Modify Printer" = "Modify Printer";
1036 "Move All Jobs" = "Move All Jobs";
1037 "Move Job" = "Move Job";
1038 "Moved Permanently" = "Moved Permanently";
1039 "NULL PPD file pointer" = "NULL PPD file pointer";
1040 "Name OID uses indefinite length" = "Name OID uses indefinite length";
1041 "Nested classes are not allowed." = "Nested classes are not allowed.";
1043 "New credentials are not valid for name." = "New credentials are not valid for name.";
1044 "New credentials are older than stored credentials." = "New credentials are older than stored credentials.";
1046 "No Content" = "No Content";
1047 "No IPP attributes." = "No IPP attributes.";
1048 "No PPD name" = "No PPD name";
1049 "No VarBind SEQUENCE" = "No VarBind SEQUENCE";
1050 "No Windows printer drivers are installed." = "No Windows printer drivers are installed.";
1051 "No active connection" = "No active connection";
1052 "No active connection." = "No active connection.";
1053 "No active jobs on %s." = "No active jobs on %s.";
1054 "No attributes in request." = "No attributes in request.";
1055 "No authentication information provided." = "No authentication information provided.";
1056 "No common name specified." = "No common name specified.";
1057 "No community name" = "No community name";
1058 "No default destination." = "No default destination.";
1059 "No default printer." = "No default printer.";
1060 "No destinations added." = "No destinations added.";
1061 "No device URI found in argv[0] or in DEVICE_URI environment variable." = "No device URI found in argv[0] or in DEVICE_URI environment variable.";
1062 "No error-index" = "No error-index";
1063 "No error-status" = "No error-status";
1064 "No file in print request." = "No file in print request.";
1065 "No modification time" = "No modification time";
1066 "No name OID" = "No name OID";
1067 "No pages were found." = "No pages were found.";
1068 "No printer name" = "No printer name";
1069 "No printer-uri found" = "No printer-uri found";
1070 "No printer-uri found for class" = "No printer-uri found for class";
1071 "No printer-uri in request." = "No printer-uri in request.";
1072 "No request URI." = "No request URI.";
1073 "No request protocol version." = "No request protocol version.";
1074 "No request sent." = "No request sent.";
1075 "No request-id" = "No request-id";
1076 "No stored credentials, not valid for name." = "No stored credentials, not valid for name.";
1077 "No subscription attributes in request." = "No subscription attributes in request.";
1078 "No subscriptions found." = "No subscriptions found.";
1079 "No variable-bindings SEQUENCE" = "No variable-bindings SEQUENCE";
1080 "No version number" = "No version number";
1081 "Non-continuous (Mark sensing)" = "Non-continuous (Mark sensing)";
1082 "Non-continuous (Web sensing)" = "Non-continuous (Web sensing)";
1084 "Normal" = "Normal";
1085 "Not Found" = "Not Found";
1086 "Not Implemented" = "Not Implemented";
1087 "Not Installed" = "Not Installed";
1088 "Not Modified" = "Not Modified";
1089 "Not Supported" = "Not Supported";
1090 "Not allowed to print." = "Not allowed to print.";
1092 "Note: this program only validates the DSC comments, not the PostScript itself." = "Note: this program only validates the DSC comments, not the PostScript itself.";
1094 "Off (1-Sided)" = "Off (1-Sided)";
1096 "Online Help" = "Online Help";
1097 "Only local users can create a local printer." = "Only local users can create a local printer.";
1098 "Open of %s failed: %s" = "Open of %s failed: %s";
1099 "OpenGroup without a CloseGroup first" = "OpenGroup without a CloseGroup first";
1100 "OpenUI/JCLOpenUI without a CloseUI/JCLCloseUI first" = "OpenUI/JCLOpenUI without a CloseUI/JCLCloseUI first";
1101 "Operation Policy" = "Operation Policy";
1102 "Option \"%s\" cannot be included via %%%%IncludeFeature." = "Option “%s” cannot be included via %%%%IncludeFeature.";
1103 "Options Installed" = "Options Installed";
1104 "Options:" = "Options:";
1105 "Other Media" = "Other Media";
1106 "Other Tray" = "Other Tray";
1107 "Out of date PPD cache file." = "Out of date PPD cache file.";
1108 "Out of memory." = "Out of memory.";
1109 "Output Mode" = "Output Mode";
1111 "PCL Laser Printer" = "PCL Laser Printer";
1112 "PRC16K" = "PRC16K";
1113 "PRC16K Long Edge" = "PRC16K Long Edge";
1114 "PRC32K" = "PRC32K";
1115 "PRC32K Long Edge" = "PRC32K Long Edge";
1116 "PRC32K Oversize" = "PRC32K Oversize";
1117 "PRC32K Oversize Long Edge" = "PRC32K Oversize Long Edge";
1118 "PRINTER environment variable names default destination that does not exist." = "PRINTER environment variable names default destination that does not exist.";
1119 "Packet does not contain a Get-Response-PDU" = "Packet does not contain a Get-Response-PDU";
1120 "Packet does not start with SEQUENCE" = "Packet does not start with SEQUENCE";
1121 "ParamCustominCutInterval" = "ParamCustominCutInterval";
1122 "ParamCustominTearInterval" = "ParamCustominTearInterval";
1123 "Password for %s on %s? " = "Password for %s on %s? ";
1124 "Password for %s required to access %s via SAMBA: " = "Password for %s required to access %s via SAMBA: ";
1125 "Pause Class" = "Pause Class";
1126 "Pause Printer" = "Pause Printer";
1127 "Peel-Off" = "Peel-Off";
1129 "Photo Labels" = "Photo Labels";
1130 "Plain Paper" = "Plain Paper";
1131 "Policies" = "Policies";
1132 "Port Monitor" = "Port Monitor";
1133 "PostScript Printer" = "PostScript Printer";
1134 "Postcard" = "Postcard";
1135 "Postcard Double" = "Postcard Double";
1136 "Postcard Double Long Edge" = "Postcard Double Long Edge";
1137 "Postcard Long Edge" = "Postcard Long Edge";
1138 "Preparing to print." = "Preparing to print.";
1139 "Print Density" = "Print Density";
1140 "Print Job:" = "Print Job:";
1141 "Print Mode" = "Print Mode";
1142 "Print Quality" = "Print Quality";
1143 "Print Rate" = "Print Rate";
1144 "Print Self-Test Page" = "Print Self-Test Page";
1145 "Print Speed" = "Print Speed";
1146 "Print Test Page" = "Print Test Page";
1147 "Print and Cut" = "Print and Cut";
1148 "Print and Tear" = "Print and Tear";
1149 "Print file sent." = "Print file sent.";
1150 "Print job canceled at printer." = "Print job canceled at printer.";
1151 "Print job too large." = "Print job too large.";
1152 "Print job was not accepted." = "Print job was not accepted.";
1153 "Printer \"%s\" already exists." = "Printer “%s” already exists.";
1154 "Printer Added" = "Printer Added";
1155 "Printer Default" = "Printer Default";
1156 "Printer Deleted" = "Printer Deleted";
1157 "Printer Modified" = "Printer Modified";
1158 "Printer Paused" = "Printer Paused";
1159 "Printer Settings" = "Printer Settings";
1160 "Printer cannot print supplied content." = "Printer cannot print supplied content.";
1161 "Printer cannot print with supplied options." = "Printer cannot print with supplied options.";
1162 "Printer does not support required IPP attributes or document formats." = "Printer does not support required IPP attributes or document formats.";
1163 "Printer:" = "Printer:";
1164 "Printers" = "Printers";
1165 "Printing page %d, %u%% complete." = "Printing page %d, %u%% complete.";
1167 "Quarto" = "Quarto";
1168 "Quota limit reached." = "Quota limit reached.";
1169 "Rank Owner Job File(s) Total Size" = "Rank Owner Job File(s) Total Size";
1170 "Reject Jobs" = "Reject Jobs";
1171 "Remote host did not accept control file (%d)." = "Remote host did not accept control file (%d).";
1172 "Remote host did not accept data file (%d)." = "Remote host did not accept data file (%d).";
1173 "Reprint After Error" = "Reprint After Error";
1174 "Request Entity Too Large" = "Request Entity Too Large";
1175 "Resolution" = "Resolution";
1176 "Resume Class" = "Resume Class";
1177 "Resume Printer" = "Resume Printer";
1178 "Return Address" = "Return Address";
1179 "Rewind" = "Rewind";
1180 "Running command: %s %s -N -A %s -c '%s'" = "Running command: %s %s -N -A %s -c ‘%s’";
1181 "SEQUENCE uses indefinite length" = "SEQUENCE uses indefinite length";
1182 "SSL/TLS Negotiation Error" = "SSL/TLS Negotiation Error";
1183 "See Other" = "See Other";
1184 "See remote printer." = "See remote printer.";
1185 "Self-signed credentials are blocked." = "Self-signed credentials are blocked.";
1186 "Sending data to printer." = "Sending data to printer.";
1187 "Server Restarted" = "Server Restarted";
1188 "Server Security Auditing" = "Server Security Auditing";
1189 "Server Started" = "Server Started";
1190 "Server Stopped" = "Server Stopped";
1191 "Server credentials not set." = "Server credentials not set.";
1192 "Service Unavailable" = "Service Unavailable";
1193 "Set Allowed Users" = "Set Allowed Users";
1194 "Set As Server Default" = "Set As Server Default";
1195 "Set Class Options" = "Set Class Options";
1196 "Set Printer Options" = "Set Printer Options";
1197 "Set Publishing" = "Set Publishing";
1198 "Shipping Address" = "Shipping Address";
1199 "Short-Edge (Landscape)" = "Short-Edge (Landscape)";
1200 "Special Paper" = "Special Paper";
1201 "Spooling job, %.0f%% complete." = "Spooling job, %.0f%% complete.";
1202 "Standard" = "Standard";
1203 "Staple" = "Staple";
1204 // TRANSLATORS: Banner/cover sheet before the print job.
1205 "Starting Banner" = "Starting Banner";
1206 "Starting page %d." = "Starting page %d.";
1207 "Statement" = "Statement";
1208 "Subscription #%d does not exist." = "Subscription #%d does not exist.";
1209 "Substitutions:" = "Substitutions:";
1210 "Super A" = "Super A";
1211 "Super B" = "Super B";
1212 "Super B/A3" = "Super B/A3";
1213 "Switching Protocols" = "Switching Protocols";
1214 "Tabloid" = "Tabloid";
1215 "Tabloid Oversize" = "Tabloid Oversize";
1216 "Tabloid Oversize Long Edge" = "Tabloid Oversize Long Edge";
1218 "Tear-Off" = "Tear-Off";
1219 "Tear-Off Adjust Position" = "Tear-Off Adjust Position";
1220 "The \"%s\" attribute is required for print jobs." = "The “%s” attribute is required for print jobs.";
1221 "The %s attribute cannot be provided with job-ids." = "The %s attribute cannot be provided with job-ids.";
1222 "The '%s' Job Status attribute cannot be supplied in a job creation request." = "The ‘%s’ Job Status attribute cannot be supplied in a job creation request.";
1223 "The '%s' operation attribute cannot be supplied in a Create-Job request." = "The ‘%s’ operation attribute cannot be supplied in a Create-Job request.";
1224 "The PPD file \"%s\" could not be found." = "The PPD file “%s” could not be found.";
1225 "The PPD file \"%s\" could not be opened: %s" = "The PPD file “%s” could not be opened: %s";
1226 "The PPD file could not be opened." = "The PPD file could not be opened.";
1227 "The class name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#)." = "The class name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#).";
1228 "The notify-lease-duration attribute cannot be used with job subscriptions." = "The notify-lease-duration attribute cannot be used with job subscriptions.";
1229 "The notify-user-data value is too large (%d > 63 octets)." = "The notify-user-data value is too large (%d > 63 octets).";
1230 "The printer configuration is incorrect or the printer no longer exists." = "The printer configuration is incorrect or the printer no longer exists.";
1231 "The printer did not respond." = "The printer did not respond.";
1232 "The printer is in use." = "The printer is in use.";
1233 "The printer is not connected." = "The printer is not connected.";
1234 "The printer is not responding." = "The printer is not responding.";
1235 "The printer is now connected." = "The printer is now connected.";
1236 "The printer is now online." = "The printer is now online.";
1237 "The printer is offline." = "The printer is offline.";
1238 "The printer is unreachable at this time." = "The printer is unreachable at this time.";
1239 "The printer may not exist or is unavailable at this time." = "The printer may not exist or is unavailable at this time.";
1240 "The printer name may only contain up to 127 printable characters and may not contain spaces, slashes (/ \\), quotes (' \"), question mark (?), or the pound sign (#)." = "The printer name may only contain up to 127 printable characters and may not contain spaces, slashes (/ \\), quotes (’ ″), question mark (?), or the pound sign (#).";
1241 "The printer or class does not exist." = "The printer or class does not exist.";
1242 "The printer or class is not shared." = "The printer or class is not shared.";
1243 "The printer-uri \"%s\" contains invalid characters." = "The printer-uri “%s” contains invalid characters.";
1244 "The printer-uri attribute is required." = "The printer-uri attribute is required.";
1245 "The printer-uri must be of the form \"ipp://HOSTNAME/classes/CLASSNAME\"." = "The printer-uri must be of the form “ipp://HOSTNAME/classes/CLASSNAME”.";
1246 "The printer-uri must be of the form \"ipp://HOSTNAME/printers/PRINTERNAME\"." = "The printer-uri must be of the form “ipp://HOSTNAME/printers/PRINTERNAME”.";
1247 "The web interface is currently disabled. Run \"cupsctl WebInterface=yes\" to enable it." = "The web interface is currently disabled. Run “cupsctl WebInterface=yes” to enable it.";
1248 "The which-jobs value \"%s\" is not supported." = "The which-jobs value “%s” is not supported.";
1249 "There are too many subscriptions." = "There are too many subscriptions.";
1250 "There was an unrecoverable USB error." = "There was an unrecoverable USB error.";
1251 "Thermal Transfer Media" = "Thermal Transfer Media";
1252 "Too many active jobs." = "Too many active jobs.";
1253 "Too many job-sheets values (%d > 2)." = "Too many job-sheets values (%d > 2).";
1254 "Too many printer-state-reasons values (%d > %d)." = "Too many printer-state-reasons values (%d > %d).";
1255 "Transparency" = "Transparency";
1257 "Tray 1" = "Tray 1";
1258 "Tray 2" = "Tray 2";
1259 "Tray 3" = "Tray 3";
1260 "Tray 4" = "Tray 4";
1261 "Trust on first use is disabled." = "Trust on first use is disabled.";
1262 "URI Too Long" = "URI Too Long";
1263 "URI too large" = "URI too large";
1264 "US Fanfold" = "US Fanfold";
1265 "US Ledger" = "US Ledger";
1266 "US Legal" = "US Legal";
1267 "US Legal Oversize" = "US Legal Oversize";
1268 "US Letter" = "US Letter";
1269 "US Letter Long Edge" = "US Letter Long Edge";
1270 "US Letter Oversize" = "US Letter Oversize";
1271 "US Letter Oversize Long Edge" = "US Letter Oversize Long Edge";
1272 "US Letter Small" = "US Letter Small";
1273 "Unable to access cupsd.conf file" = "Unable to access cupsd.conf file";
1274 "Unable to access help file." = "Unable to access help file.";
1275 "Unable to add class" = "Unable to add class";
1276 "Unable to add document to print job." = "Unable to add document to print job.";
1277 "Unable to add job for destination \"%s\"." = "Unable to add job for destination “%s”.";
1278 "Unable to add printer" = "Unable to add printer";
1279 "Unable to allocate memory for file types." = "Unable to allocate memory for file types.";
1280 "Unable to allocate memory for page info" = "Unable to allocate memory for page info";
1281 "Unable to allocate memory for pages array" = "Unable to allocate memory for pages array";
1282 "Unable to cancel print job." = "Unable to cancel print job.";
1283 "Unable to change printer" = "Unable to change printer";
1284 "Unable to change printer-is-shared attribute" = "Unable to change printer-is-shared attribute";
1285 "Unable to change server settings" = "Unable to change server settings";
1286 "Unable to compile mimeMediaType regular expression: %s." = "Unable to compile mimeMediaType regular expression: %s.";
1287 "Unable to compile naturalLanguage regular expression: %s." = "Unable to compile naturalLanguage regular expression: %s.";
1288 "Unable to configure printer options." = "Unable to configure printer options.";
1289 "Unable to connect to host." = "Unable to connect to host.";
1290 "Unable to contact printer, queuing on next printer in class." = "Unable to contact printer, queuing on next printer in class.";
1291 "Unable to copy 64-bit CUPS printer driver files (%d)." = "Unable to copy 64-bit CUPS printer driver files (%d).";
1292 "Unable to copy 64-bit Windows printer driver files (%d)." = "Unable to copy 64-bit Windows printer driver files (%d).";
1293 "Unable to copy CUPS printer driver files (%d)." = "Unable to copy CUPS printer driver files (%d).";
1294 "Unable to copy PPD file - %s" = "Unable to copy PPD file - %s";
1295 "Unable to copy PPD file." = "Unable to copy PPD file.";
1296 "Unable to copy Windows 2000 printer driver files (%d)." = "Unable to copy Windows 2000 printer driver files (%d).";
1297 "Unable to copy Windows 9x printer driver files (%d)." = "Unable to copy Windows 9x printer driver files (%d).";
1298 "Unable to create credentials from array." = "Unable to create credentials from array.";
1299 "Unable to create printer-uri" = "Unable to create printer-uri";
1300 "Unable to create printer." = "Unable to create printer.";
1301 "Unable to create server credentials." = "Unable to create server credentials.";
1302 "Unable to create temporary file" = "Unable to create temporary file";
1303 "Unable to delete class" = "Unable to delete class";
1304 "Unable to delete printer" = "Unable to delete printer";
1305 "Unable to do maintenance command" = "Unable to do maintenance command";
1306 "Unable to edit cupsd.conf files larger than 1MB" = "Unable to edit cupsd.conf files larger than 1MB";
1307 "Unable to establish a secure connection to host (certificate chain invalid)." = "Unable to establish a secure connection to host (certificate chain invalid).";
1308 "Unable to establish a secure connection to host (certificate not yet valid)." = "Unable to establish a secure connection to host (certificate not yet valid).";
1309 "Unable to establish a secure connection to host (expired certificate)." = "Unable to establish a secure connection to host (expired certificate).";
1310 "Unable to establish a secure connection to host (host name mismatch)." = "Unable to establish a secure connection to host (host name mismatch).";
1311 "Unable to establish a secure connection to host (peer dropped connection before responding)." = "Unable to establish a secure connection to host (peer dropped connection before responding).";
1312 "Unable to establish a secure connection to host (self-signed certificate)." = "Unable to establish a secure connection to host (self-signed certificate).";
1313 "Unable to establish a secure connection to host (untrusted certificate)." = "Unable to establish a secure connection to host (untrusted certificate).";
1314 "Unable to establish a secure connection to host." = "Unable to establish a secure connection to host.";
1315 "Unable to find destination for job" = "Unable to find destination for job";
1316 "Unable to find printer." = "Unable to find printer.";
1317 "Unable to find server credentials." = "Unable to find server credentials.";
1318 "Unable to get backend exit status." = "Unable to get backend exit status.";
1319 "Unable to get class list" = "Unable to get class list";
1320 "Unable to get class status" = "Unable to get class status";
1321 "Unable to get list of printer drivers" = "Unable to get list of printer drivers";
1322 "Unable to get printer attributes" = "Unable to get printer attributes";
1323 "Unable to get printer list" = "Unable to get printer list";
1324 "Unable to get printer status" = "Unable to get printer status";
1325 "Unable to get printer status." = "Unable to get printer status.";
1326 "Unable to install Windows 2000 printer driver files (%d)." = "Unable to install Windows 2000 printer driver files (%d).";
1327 "Unable to install Windows 9x printer driver files (%d)." = "Unable to install Windows 9x printer driver files (%d).";
1328 "Unable to load help index." = "Unable to load help index.";
1329 "Unable to locate printer \"%s\"." = "Unable to locate printer “%s”.";
1330 "Unable to locate printer." = "Unable to locate printer.";
1331 "Unable to modify class" = "Unable to modify class";
1332 "Unable to modify printer" = "Unable to modify printer";
1333 "Unable to move job" = "Unable to move job";
1334 "Unable to move jobs" = "Unable to move jobs";
1335 "Unable to open PPD file" = "Unable to open PPD file";
1336 "Unable to open cupsd.conf file:" = "Unable to open cupsd.conf file:";
1337 "Unable to open device file" = "Unable to open device file";
1338 "Unable to open document #%d in job #%d." = "Unable to open document #%d in job #%d.";
1339 "Unable to open help file." = "Unable to open help file.";
1340 "Unable to open print file" = "Unable to open print file";
1341 "Unable to open raster file" = "Unable to open raster file";
1342 "Unable to print test page" = "Unable to print test page";
1343 "Unable to read print data." = "Unable to read print data.";
1344 "Unable to rename job document file." = "Unable to rename job document file.";
1345 "Unable to resolve printer-uri." = "Unable to resolve printer-uri.";
1346 "Unable to run \"%s\": %s" = "Unable to run “%s”: %s";
1347 "Unable to see in file" = "Unable to see in file";
1348 "Unable to send command to printer driver" = "Unable to send command to printer driver";
1349 "Unable to send data to printer." = "Unable to send data to printer.";
1350 "Unable to set Windows printer driver (%d)." = "Unable to set Windows printer driver (%d).";
1351 "Unable to set options" = "Unable to set options";
1352 "Unable to set server default" = "Unable to set server default";
1353 "Unable to start backend process." = "Unable to start backend process.";
1354 "Unable to upload cupsd.conf file" = "Unable to upload cupsd.conf file";
1355 "Unable to use legacy USB class driver." = "Unable to use legacy USB class driver.";
1356 "Unable to write print data" = "Unable to write print data";
1357 "Unable to write uncompressed print data: %s" = "Unable to write uncompressed print data: %s";
1358 "Unauthorized" = "Unauthorized";
1360 "Unknown" = "Unknown";
1361 "Unknown choice \"%s\" for option \"%s\"." = "Unknown choice “%s” for option “%s”.";
1362 "Unknown encryption option value: \"%s\"." = "Unknown encryption option value: “%s”.";
1363 "Unknown file order: \"%s\"." = "Unknown file order: “%s”.";
1364 "Unknown format character: \"%c\"." = "Unknown format character: “%c”.";
1365 "Unknown hash algorithm." = "Unknown hash algorithm.";
1366 "Unknown media size name." = "Unknown media size name.";
1367 "Unknown option \"%s\" with value \"%s\"." = "Unknown option “%s” with value “%s”.";
1368 "Unknown option \"%s\"." = "Unknown option “%s”.";
1369 "Unknown print mode: \"%s\"." = "Unknown print mode: “%s”.";
1370 "Unknown printer-error-policy \"%s\"." = "Unknown printer-error-policy “%s”.";
1371 "Unknown printer-op-policy \"%s\"." = "Unknown printer-op-policy “%s”.";
1372 "Unknown request method." = "Unknown request method.";
1373 "Unknown request version." = "Unknown request version.";
1374 "Unknown scheme in URI" = "Unknown scheme in URI";
1375 "Unknown service name." = "Unknown service name.";
1376 "Unknown version option value: \"%s\"." = "Unknown version option value: “%s”.";
1377 "Unsupported 'compression' value \"%s\"." = "Unsupported ‘compression’ value “%s”.";
1378 "Unsupported 'document-format' value \"%s\"." = "Unsupported ‘document-format’ value “%s”.";
1379 "Unsupported 'job-name' value." = "Unsupported ‘job-name’ value.";
1380 "Unsupported character set \"%s\"." = "Unsupported character set “%s”.";
1381 "Unsupported compression \"%s\"." = "Unsupported compression “%s”.";
1382 "Unsupported document-format \"%s\"." = "Unsupported document-format “%s”.";
1383 "Unsupported document-format \"%s/%s\"." = "Unsupported document-format “%s/%s”.";
1384 "Unsupported format \"%s\"." = "Unsupported format “%s”.";
1385 "Unsupported margins." = "Unsupported margins.";
1386 "Unsupported media value." = "Unsupported media value.";
1387 "Unsupported number-up value %d, using number-up=1." = "Unsupported number-up value %d, using number-up=1.";
1388 "Unsupported number-up-layout value %s, using number-up-layout=lrtb." = "Unsupported number-up-layout value %s, using number-up-layout=lrtb.";
1389 "Unsupported page-border value %s, using page-border=none." = "Unsupported page-border value %s, using page-border=none.";
1390 "Unsupported raster data." = "Unsupported raster data.";
1391 "Unsupported value type" = "Unsupported value type";
1392 "Upgrade Required" = "Upgrade Required";
1393 "Usage:\n\n lpadmin [-h server] -d destination\n lpadmin [-h server] -x destination\n lpadmin [-h server] -p printer [-c add-class] [-i interface] [-m model]\n [-r remove-class] [-v device] [-D description]\n [-P ppd-file] [-o name=value]\n [-u allow:user,user] [-u deny:user,user]" = "Usage:\n\n lpadmin [-h server] -d destination\n lpadmin [-h server] -x destination\n lpadmin [-h server] -p printer [-c add-class] [-i interface] [-m model]\n [-r remove-class] [-v device] [-D description]\n [-P ppd-file] [-o name=value]\n [-u allow:user,user] [-u deny:user,user]";
1394 "Usage: %s job-id user title copies options [file]" = "Usage: %s job-id user title copies options [file]";
1395 "Usage: cupsaddsmb [options] printer1 ... printerN" = "Usage: cupsaddsmb [options] printer1 … printerN";
1396 "Usage: cupsctl [options] [param=value ... paramN=valueN]" = "Usage: cupsctl [options] [param=value … paramN=valueN]";
1397 "Usage: cupsd [options]" = "Usage: cupsd [options]";
1398 "Usage: cupsfilter [ options ] [ -- ] filename" = "Usage: cupsfilter [ options ] [ -- ] filename";
1399 "Usage: cupstestdsc [options] filename.ps [... filename.ps]" = "Usage: cupstestdsc [options] filename.ps [… filename.ps]";
1400 "Usage: cupstestppd [options] filename1.ppd[.gz] [... filenameN.ppd[.gz]]" = "Usage: cupstestppd [options] filename1.ppd[.gz] [… filenameN.ppd[.gz]]";
1401 "Usage: ippfind [options] regtype[,subtype][.domain.] ... [expression]\n ippfind [options] name[.regtype[.domain.]] ... [expression]\n ippfind --help\n ippfind --version" = "Usage: ippfind [options] regtype[,subtype][.domain.] … [expression]\n ippfind [options] name[.regtype[.domain.]] … [expression]\n ippfind --help\n ippfind --version";
1402 "Usage: ipptool [options] URI filename [ ... filenameN ]" = "Usage: ipptool [options] URI filename [ … filenameN ]";
1403 "Usage: lpmove job/src dest" = "Usage: lpmove job/src dest";
1404 "Usage: lpoptions [-h server] [-E] -d printer\n lpoptions [-h server] [-E] [-p printer] -l\n lpoptions [-h server] [-E] -p printer -o option[=value] ...\n lpoptions [-h server] [-E] -x printer" = "Usage: lpoptions [-h server] [-E] -d printer\n lpoptions [-h server] [-E] [-p printer] -l\n lpoptions [-h server] [-E] -p printer -o option[=value] …\n lpoptions [-h server] [-E] -x printer";
1405 "Usage: lpq [-P dest] [-U username] [-h hostname[:port]] [-l] [+interval]" = "Usage: lpq [-P dest] [-U username] [-h hostname[:port]] [-l] [+interval]";
1406 "Usage: ppdc [options] filename.drv [ ... filenameN.drv ]" = "Usage: ppdc [options] filename.drv [ … filenameN.drv ]";
1407 "Usage: ppdhtml [options] filename.drv >filename.html" = "Usage: ppdhtml [options] filename.drv >filename.html";
1408 "Usage: ppdi [options] filename.ppd [ ... filenameN.ppd ]" = "Usage: ppdi [options] filename.ppd [ … filenameN.ppd ]";
1409 "Usage: ppdmerge [options] filename.ppd [ ... filenameN.ppd ]" = "Usage: ppdmerge [options] filename.ppd [ … filenameN.ppd ]";
1410 "Usage: ppdpo [options] -o filename.po filename.drv [ ... filenameN.drv ]" = "Usage: ppdpo [options] -o filename.po filename.drv [ … filenameN.drv ]";
1411 "Usage: snmp [host-or-ip-address]" = "Usage: snmp [host-or-ip-address]";
1412 "Value uses indefinite length" = "Value uses indefinite length";
1413 "VarBind uses indefinite length" = "VarBind uses indefinite length";
1414 "Version uses indefinite length" = "Version uses indefinite length";
1415 "Waiting for job to complete." = "Waiting for job to complete.";
1416 "Waiting for printer to become available." = "Waiting for printer to become available.";
1417 "Waiting for printer to finish." = "Waiting for printer to finish.";
1418 "Warning, no Windows 2000 printer drivers are installed." = "Warning, no Windows 2000 printer drivers are installed.";
1419 "Web Interface is Disabled" = "Web Interface is Disabled";
1421 "You must access this page using the URL <A HREF=\"https://%s:%d%s\">https://%s:%d%s</A>." = "You must access this page using the URL <A HREF=\"https://%s:%d%s\">https://%s:%d%s</A>.";
1422 "ZPL Label Printer" = "ZPL Label Printer";
1424 "aborted" = "aborted";
1425 "canceled" = "canceled";
1426 "completed" = "completed";
1427 "cups-deviced failed to execute." = "cups-deviced failed to execute.";
1428 "cups-driverd failed to execute." = "cups-driverd failed to execute.";
1429 "cupsaddsmb: No PPD file for printer \"%s\" - %s" = "cupsaddsmb: No PPD file for printer “%s” - %s";
1430 "cupsctl: Cannot set Listen or Port directly." = "cupsctl: Cannot set Listen or Port directly.";
1431 "cupsctl: Unable to connect to server: %s" = "cupsctl: Unable to connect to server: %s";
1432 "cupsctl: Unknown option \"%s\"" = "cupsctl: Unknown option “%s”";
1433 "cupsctl: Unknown option \"-%c\"" = "cupsctl: Unknown option “-%c”";
1434 "cupsd: Expected config filename after \"-c\" option." = "cupsd: Expected config filename after “-c” option.";
1435 "cupsd: Expected cups-files.conf filename after \"-s\" option." = "cupsd: Expected cups-files.conf filename after “-s” option.";
1436 "cupsd: On-demand support not compiled in, running in normal mode." = "cupsd: On-demand support not compiled in, running in normal mode.";
1437 "cupsd: Relative cups-files.conf filename not allowed." = "cupsd: Relative cups-files.conf filename not allowed.";
1438 "cupsd: Unable to get current directory." = "cupsd: Unable to get current directory.";
1439 "cupsd: Unable to get path to cups-files.conf file." = "cupsd: Unable to get path to cups-files.conf file.";
1440 "cupsd: Unknown argument \"%s\" - aborting." = "cupsd: Unknown argument “%s” - aborting.";
1441 "cupsd: Unknown option \"%c\" - aborting." = "cupsd: Unknown option “%c” - aborting.";
1442 "cupsfilter: Invalid document number %d." = "cupsfilter: Invalid document number %d.";
1443 "cupsfilter: Invalid job ID %d." = "cupsfilter: Invalid job ID %d.";
1444 "cupsfilter: Only one filename can be specified." = "cupsfilter: Only one filename can be specified.";
1445 "cupsfilter: Unable to get job file - %s" = "cupsfilter: Unable to get job file - %s";
1446 "cupstestppd: The -q option is incompatible with the -v option." = "cupstestppd: The -q option is incompatible with the -v option.";
1447 "cupstestppd: The -v option is incompatible with the -q option." = "cupstestppd: The -v option is incompatible with the -q option.";
1448 "device for %s/%s: %s" = "device for %s/%s: %s";
1449 "device for %s: %s" = "device for %s: %s";
1450 "error-index uses indefinite length" = "error-index uses indefinite length";
1451 "error-status uses indefinite length" = "error-status uses indefinite length";
1453 "help\t\tGet help on commands." = "help\t\tGet help on commands.";
1455 "ippfind: Bad regular expression: %s" = "ippfind: Bad regular expression: %s";
1456 "ippfind: Cannot use --and after --or." = "ippfind: Cannot use --and after --or.";
1457 "ippfind: Expected key name after %s." = "ippfind: Expected key name after %s.";
1458 "ippfind: Expected port range after %s." = "ippfind: Expected port range after %s.";
1459 "ippfind: Expected program after %s." = "ippfind: Expected program after %s.";
1460 "ippfind: Expected semi-colon after %s." = "ippfind: Expected semi-colon after %s.";
1461 "ippfind: Missing close brace in substitution." = "ippfind: Missing close brace in substitution.";
1462 "ippfind: Missing close parenthesis." = "ippfind: Missing close parenthesis.";
1463 "ippfind: Missing expression before \"--and\"." = "ippfind: Missing expression before “--and”.";
1464 "ippfind: Missing expression before \"--or\"." = "ippfind: Missing expression before “--or”.";
1465 "ippfind: Missing key name after %s." = "ippfind: Missing key name after %s.";
1466 "ippfind: Missing open parenthesis." = "ippfind: Missing open parenthesis.";
1467 "ippfind: Missing program after %s." = "ippfind: Missing program after %s.";
1468 "ippfind: Missing regular expression after %s." = "ippfind: Missing regular expression after %s.";
1469 "ippfind: Missing semi-colon after %s." = "ippfind: Missing semi-colon after %s.";
1470 "ippfind: Out of memory." = "ippfind: Out of memory.";
1471 "ippfind: Too many parenthesis." = "ippfind: Too many parenthesis.";
1472 "ippfind: Unable to browse or resolve: %s" = "ippfind: Unable to browse or resolve: %s";
1473 "ippfind: Unable to execute \"%s\": %s" = "ippfind: Unable to execute “%s”: %s";
1474 "ippfind: Unable to use Bonjour: %s" = "ippfind: Unable to use Bonjour: %s";
1475 "ippfind: Unknown variable \"{%s}\"." = "ippfind: Unknown variable “{%s}”.";
1476 "ipptool: \"-i\" and \"-n\" are incompatible with \"--ippserver\", \"-P\", and \"-X\"." = "ipptool: “-i” and “-n” are incompatible with “--ippserver”, “-P”, and “-X”.";
1477 "ipptool: \"-i\" and \"-n\" are incompatible with \"-P\" and \"-X\"." = "ipptool: “-i” and “-n” are incompatible with “-P” and “-X”.";
1478 "ipptool: Bad URI - %s." = "ipptool: Bad URI - %s.";
1479 "ipptool: Invalid seconds for \"-i\"." = "ipptool: Invalid seconds for “-i”.";
1480 "ipptool: May only specify a single URI." = "ipptool: May only specify a single URI.";
1481 "ipptool: Missing count for \"-n\"." = "ipptool: Missing count for “-n”.";
1482 "ipptool: Missing filename for \"--ippserver\"." = "ipptool: Missing filename for “--ippserver”.";
1483 "ipptool: Missing filename for \"-f\"." = "ipptool: Missing filename for “-f”.";
1484 "ipptool: Missing name=value for \"-d\"." = "ipptool: Missing name=value for “-d”.";
1485 "ipptool: Missing seconds for \"-i\"." = "ipptool: Missing seconds for “-i”.";
1486 "ipptool: URI required before test file." = "ipptool: URI required before test file.";
1487 "ipptool: Unknown option \"-%c\"." = "ipptool: Unknown option “-%c”.";
1488 "job-printer-uri attribute missing." = "job-printer-uri attribute missing.";
1489 "lpadmin: Class name can only contain printable characters." = "lpadmin: Class name can only contain printable characters.";
1490 "lpadmin: Expected PPD after \"-%c\" option." = "lpadmin: Expected PPD after “-%c” option.";
1491 "lpadmin: Expected allow/deny:userlist after \"-u\" option." = "lpadmin: Expected allow/deny:userlist after “-u” option.";
1492 "lpadmin: Expected class after \"-r\" option." = "lpadmin: Expected class after “-r” option.";
1493 "lpadmin: Expected class name after \"-c\" option." = "lpadmin: Expected class name after “-c” option.";
1494 "lpadmin: Expected description after \"-D\" option." = "lpadmin: Expected description after “-D” option.";
1495 "lpadmin: Expected device URI after \"-v\" option." = "lpadmin: Expected device URI after “-v” option.";
1496 "lpadmin: Expected file type(s) after \"-I\" option." = "lpadmin: Expected file type(s) after “-I” option.";
1497 "lpadmin: Expected hostname after \"-h\" option." = "lpadmin: Expected hostname after “-h” option.";
1498 "lpadmin: Expected location after \"-L\" option." = "lpadmin: Expected location after “-L” option.";
1499 "lpadmin: Expected model after \"-m\" option." = "lpadmin: Expected model after “-m” option.";
1500 "lpadmin: Expected name after \"-R\" option." = "lpadmin: Expected name after “-R” option.";
1501 "lpadmin: Expected name=value after \"-o\" option." = "lpadmin: Expected name=value after “-o” option.";
1502 "lpadmin: Expected printer after \"-p\" option." = "lpadmin: Expected printer after “-p” option.";
1503 "lpadmin: Expected printer name after \"-d\" option." = "lpadmin: Expected printer name after “-d” option.";
1504 "lpadmin: Expected printer or class after \"-x\" option." = "lpadmin: Expected printer or class after “-x” option.";
1505 "lpadmin: No member names were seen." = "lpadmin: No member names were seen.";
1506 "lpadmin: Printer %s is already a member of class %s." = "lpadmin: Printer %s is already a member of class %s.";
1507 "lpadmin: Printer %s is not a member of class %s." = "lpadmin: Printer %s is not a member of class %s.";
1508 "lpadmin: Printer name can only contain printable characters." = "lpadmin: Printer name can only contain printable characters.";
1509 "lpadmin: System V interface scripts are no longer supported for security reasons." = "lpadmin: System V interface scripts are no longer supported for security reasons.";
1510 "lpadmin: Unable to add a printer to the class:\n You must specify a printer name first." = "lpadmin: Unable to add a printer to the class:\n You must specify a printer name first.";
1511 "lpadmin: Unable to connect to server: %s" = "lpadmin: Unable to connect to server: %s";
1512 "lpadmin: Unable to create temporary file" = "lpadmin: Unable to create temporary file";
1513 "lpadmin: Unable to delete option:\n You must specify a printer name first." = "lpadmin: Unable to delete option:\n You must specify a printer name first.";
1514 "lpadmin: Unable to open PPD \"%s\": %s on line %d." = "lpadmin: Unable to open PPD “%s”: %s on line %d.";
1515 "lpadmin: Unable to open PPD file \"%s\" - %s" = "lpadmin: Unable to open PPD file “%s” - %s";
1516 "lpadmin: Unable to remove a printer from the class:\n You must specify a printer name first." = "lpadmin: Unable to remove a printer from the class:\n You must specify a printer name first.";
1517 "lpadmin: Unable to set the printer options:\n You must specify a printer name first." = "lpadmin: Unable to set the printer options:\n You must specify a printer name first.";
1518 "lpadmin: Unknown allow/deny option \"%s\"." = "lpadmin: Unknown allow/deny option “%s”.";
1519 "lpadmin: Unknown argument \"%s\"." = "lpadmin: Unknown argument “%s”.";
1520 "lpadmin: Unknown option \"%c\"." = "lpadmin: Unknown option “%c”.";
1521 "lpadmin: Warning - content type list ignored." = "lpadmin: Warning - content type list ignored.";
1523 "lpinfo: Expected 1284 device ID string after \"--device-id\"." = "lpinfo: Expected 1284 device ID string after “--device-id”.";
1524 "lpinfo: Expected language after \"--language\"." = "lpinfo: Expected language after “--language”.";
1525 "lpinfo: Expected make and model after \"--make-and-model\"." = "lpinfo: Expected make and model after “--make-and-model”.";
1526 "lpinfo: Expected product string after \"--product\"." = "lpinfo: Expected product string after “--product”.";
1527 "lpinfo: Expected scheme list after \"--exclude-schemes\"." = "lpinfo: Expected scheme list after “--exclude-schemes”.";
1528 "lpinfo: Expected scheme list after \"--include-schemes\"." = "lpinfo: Expected scheme list after “--include-schemes”.";
1529 "lpinfo: Expected timeout after \"--timeout\"." = "lpinfo: Expected timeout after “--timeout”.";
1530 "lpmove: Unable to connect to server: %s" = "lpmove: Unable to connect to server: %s";
1531 "lpmove: Unknown argument \"%s\"." = "lpmove: Unknown argument “%s”.";
1532 "lpoptions: No printers." = "lpoptions: No printers.";
1533 "lpoptions: Unable to add printer or instance: %s" = "lpoptions: Unable to add printer or instance: %s";
1534 "lpoptions: Unable to get PPD file for %s: %s" = "lpoptions: Unable to get PPD file for %s: %s";
1535 "lpoptions: Unable to open PPD file for %s." = "lpoptions: Unable to open PPD file for %s.";
1536 "lpoptions: Unknown printer or class." = "lpoptions: Unknown printer or class.";
1537 "lpstat: error - %s environment variable names non-existent destination \"%s\"." = "lpstat: error - %s environment variable names non-existent destination “%s”.";
1538 "members of class %s:" = "members of class %s:";
1539 "no entries" = "no entries";
1540 "no system default destination" = "no system default destination";
1541 "notify-events not specified." = "notify-events not specified.";
1542 "notify-recipient-uri URI \"%s\" is already used." = "notify-recipient-uri URI “%s” is already used.";
1543 "notify-recipient-uri URI \"%s\" uses unknown scheme." = "notify-recipient-uri URI “%s” uses unknown scheme.";
1544 "pending" = "pending";
1545 "ppdc: Adding include directory \"%s\"." = "ppdc: Adding include directory “%s”.";
1546 "ppdc: Adding/updating UI text from %s." = "ppdc: Adding/updating UI text from %s.";
1547 "ppdc: Bad boolean value (%s) on line %d of %s." = "ppdc: Bad boolean value (%s) on line %d of %s.";
1548 "ppdc: Bad font attribute: %s" = "ppdc: Bad font attribute: %s";
1549 "ppdc: Bad resolution name \"%s\" on line %d of %s." = "ppdc: Bad resolution name “%s” on line %d of %s.";
1550 "ppdc: Bad status keyword %s on line %d of %s." = "ppdc: Bad status keyword %s on line %d of %s.";
1551 "ppdc: Bad variable substitution ($%c) on line %d of %s." = "ppdc: Bad variable substitution ($%c) on line %d of %s.";
1552 "ppdc: Choice found on line %d of %s with no Option." = "ppdc: Choice found on line %d of %s with no Option.";
1553 "ppdc: Duplicate #po for locale %s on line %d of %s." = "ppdc: Duplicate #po for locale %s on line %d of %s.";
1554 "ppdc: Expected a filter definition on line %d of %s." = "ppdc: Expected a filter definition on line %d of %s.";
1555 "ppdc: Expected a program name on line %d of %s." = "ppdc: Expected a program name on line %d of %s.";
1556 "ppdc: Expected boolean value on line %d of %s." = "ppdc: Expected boolean value on line %d of %s.";
1557 "ppdc: Expected charset after Font on line %d of %s." = "ppdc: Expected charset after Font on line %d of %s.";
1558 "ppdc: Expected choice code on line %d of %s." = "ppdc: Expected choice code on line %d of %s.";
1559 "ppdc: Expected choice name/text on line %d of %s." = "ppdc: Expected choice name/text on line %d of %s.";
1560 "ppdc: Expected color order for ColorModel on line %d of %s." = "ppdc: Expected color order for ColorModel on line %d of %s.";
1561 "ppdc: Expected colorspace for ColorModel on line %d of %s." = "ppdc: Expected colorspace for ColorModel on line %d of %s.";
1562 "ppdc: Expected compression for ColorModel on line %d of %s." = "ppdc: Expected compression for ColorModel on line %d of %s.";
1563 "ppdc: Expected constraints string for UIConstraints on line %d of %s." = "ppdc: Expected constraints string for UIConstraints on line %d of %s.";
1564 "ppdc: Expected driver type keyword following DriverType on line %d of %s." = "ppdc: Expected driver type keyword following DriverType on line %d of %s.";
1565 "ppdc: Expected duplex type after Duplex on line %d of %s." = "ppdc: Expected duplex type after Duplex on line %d of %s.";
1566 "ppdc: Expected encoding after Font on line %d of %s." = "ppdc: Expected encoding after Font on line %d of %s.";
1567 "ppdc: Expected filename after #po %s on line %d of %s." = "ppdc: Expected filename after #po %s on line %d of %s.";
1568 "ppdc: Expected group name/text on line %d of %s." = "ppdc: Expected group name/text on line %d of %s.";
1569 "ppdc: Expected include filename on line %d of %s." = "ppdc: Expected include filename on line %d of %s.";
1570 "ppdc: Expected integer on line %d of %s." = "ppdc: Expected integer on line %d of %s.";
1571 "ppdc: Expected locale after #po on line %d of %s." = "ppdc: Expected locale after #po on line %d of %s.";
1572 "ppdc: Expected name after %s on line %d of %s." = "ppdc: Expected name after %s on line %d of %s.";
1573 "ppdc: Expected name after FileName on line %d of %s." = "ppdc: Expected name after FileName on line %d of %s.";
1574 "ppdc: Expected name after Font on line %d of %s." = "ppdc: Expected name after Font on line %d of %s.";
1575 "ppdc: Expected name after Manufacturer on line %d of %s." = "ppdc: Expected name after Manufacturer on line %d of %s.";
1576 "ppdc: Expected name after MediaSize on line %d of %s." = "ppdc: Expected name after MediaSize on line %d of %s.";
1577 "ppdc: Expected name after ModelName on line %d of %s." = "ppdc: Expected name after ModelName on line %d of %s.";
1578 "ppdc: Expected name after PCFileName on line %d of %s." = "ppdc: Expected name after PCFileName on line %d of %s.";
1579 "ppdc: Expected name/text after %s on line %d of %s." = "ppdc: Expected name/text after %s on line %d of %s.";
1580 "ppdc: Expected name/text after Installable on line %d of %s." = "ppdc: Expected name/text after Installable on line %d of %s.";
1581 "ppdc: Expected name/text after Resolution on line %d of %s." = "ppdc: Expected name/text after Resolution on line %d of %s.";
1582 "ppdc: Expected name/text combination for ColorModel on line %d of %s." = "ppdc: Expected name/text combination for ColorModel on line %d of %s.";
1583 "ppdc: Expected option name/text on line %d of %s." = "ppdc: Expected option name/text on line %d of %s.";
1584 "ppdc: Expected option section on line %d of %s." = "ppdc: Expected option section on line %d of %s.";
1585 "ppdc: Expected option type on line %d of %s." = "ppdc: Expected option type on line %d of %s.";
1586 "ppdc: Expected override field after Resolution on line %d of %s." = "ppdc: Expected override field after Resolution on line %d of %s.";
1587 "ppdc: Expected quoted string on line %d of %s." = "ppdc: Expected quoted string on line %d of %s.";
1588 "ppdc: Expected real number on line %d of %s." = "ppdc: Expected real number on line %d of %s.";
1589 "ppdc: Expected resolution/mediatype following ColorProfile on line %d of %s." = "ppdc: Expected resolution/mediatype following ColorProfile on line %d of %s.";
1590 "ppdc: Expected resolution/mediatype following SimpleColorProfile on line %d of %s." = "ppdc: Expected resolution/mediatype following SimpleColorProfile on line %d of %s.";
1591 "ppdc: Expected selector after %s on line %d of %s." = "ppdc: Expected selector after %s on line %d of %s.";
1592 "ppdc: Expected status after Font on line %d of %s." = "ppdc: Expected status after Font on line %d of %s.";
1593 "ppdc: Expected string after Copyright on line %d of %s." = "ppdc: Expected string after Copyright on line %d of %s.";
1594 "ppdc: Expected string after Version on line %d of %s." = "ppdc: Expected string after Version on line %d of %s.";
1595 "ppdc: Expected two option names on line %d of %s." = "ppdc: Expected two option names on line %d of %s.";
1596 "ppdc: Expected value after %s on line %d of %s." = "ppdc: Expected value after %s on line %d of %s.";
1597 "ppdc: Expected version after Font on line %d of %s." = "ppdc: Expected version after Font on line %d of %s.";
1598 "ppdc: Invalid #include/#po filename \"%s\"." = "ppdc: Invalid #include/#po filename “%s”.";
1599 "ppdc: Invalid cost for filter on line %d of %s." = "ppdc: Invalid cost for filter on line %d of %s.";
1600 "ppdc: Invalid empty MIME type for filter on line %d of %s." = "ppdc: Invalid empty MIME type for filter on line %d of %s.";
1601 "ppdc: Invalid empty program name for filter on line %d of %s." = "ppdc: Invalid empty program name for filter on line %d of %s.";
1602 "ppdc: Invalid option section \"%s\" on line %d of %s." = "ppdc: Invalid option section “%s” on line %d of %s.";
1603 "ppdc: Invalid option type \"%s\" on line %d of %s." = "ppdc: Invalid option type “%s” on line %d of %s.";
1604 "ppdc: Loading driver information file \"%s\"." = "ppdc: Loading driver information file “%s”.";
1605 "ppdc: Loading messages for locale \"%s\"." = "ppdc: Loading messages for locale “%s”.";
1606 "ppdc: Loading messages from \"%s\"." = "ppdc: Loading messages from “%s”.";
1607 "ppdc: Missing #endif at end of \"%s\"." = "ppdc: Missing #endif at end of “%s”.";
1608 "ppdc: Missing #if on line %d of %s." = "ppdc: Missing #if on line %d of %s.";
1609 "ppdc: Need a msgid line before any translation strings on line %d of %s." = "ppdc: Need a msgid line before any translation strings on line %d of %s.";
1610 "ppdc: No message catalog provided for locale %s." = "ppdc: No message catalog provided for locale %s.";
1611 "ppdc: Option %s defined in two different groups on line %d of %s." = "ppdc: Option %s defined in two different groups on line %d of %s.";
1612 "ppdc: Option %s redefined with a different type on line %d of %s." = "ppdc: Option %s redefined with a different type on line %d of %s.";
1613 "ppdc: Option constraint must *name on line %d of %s." = "ppdc: Option constraint must *name on line %d of %s.";
1614 "ppdc: Too many nested #if's on line %d of %s." = "ppdc: Too many nested #if’s on line %d of %s.";
1615 "ppdc: Unable to create PPD file \"%s\" - %s." = "ppdc: Unable to create PPD file “%s” - %s.";
1616 "ppdc: Unable to create output directory %s: %s" = "ppdc: Unable to create output directory %s: %s";
1617 "ppdc: Unable to create output pipes: %s" = "ppdc: Unable to create output pipes: %s";
1618 "ppdc: Unable to execute cupstestppd: %s" = "ppdc: Unable to execute cupstestppd: %s";
1619 "ppdc: Unable to find #po file %s on line %d of %s." = "ppdc: Unable to find #po file %s on line %d of %s.";
1620 "ppdc: Unable to find include file \"%s\" on line %d of %s." = "ppdc: Unable to find include file “%s” on line %d of %s.";
1621 "ppdc: Unable to find localization for \"%s\" - %s" = "ppdc: Unable to find localization for “%s” - %s";
1622 "ppdc: Unable to load localization file \"%s\" - %s" = "ppdc: Unable to load localization file “%s” - %s";
1623 "ppdc: Unable to open %s: %s" = "ppdc: Unable to open %s: %s";
1624 "ppdc: Undefined variable (%s) on line %d of %s." = "ppdc: Undefined variable (%s) on line %d of %s.";
1625 "ppdc: Unexpected text on line %d of %s." = "ppdc: Unexpected text on line %d of %s.";
1626 "ppdc: Unknown driver type %s on line %d of %s." = "ppdc: Unknown driver type %s on line %d of %s.";
1627 "ppdc: Unknown duplex type \"%s\" on line %d of %s." = "ppdc: Unknown duplex type “%s” on line %d of %s.";
1628 "ppdc: Unknown media size \"%s\" on line %d of %s." = "ppdc: Unknown media size “%s” on line %d of %s.";
1629 "ppdc: Unknown message catalog format for \"%s\"." = "ppdc: Unknown message catalog format for “%s”.";
1630 "ppdc: Unknown token \"%s\" seen on line %d of %s." = "ppdc: Unknown token “%s” seen on line %d of %s.";
1631 "ppdc: Unknown trailing characters in real number \"%s\" on line %d of %s." = "ppdc: Unknown trailing characters in real number “%s” on line %d of %s.";
1632 "ppdc: Unterminated string starting with %c on line %d of %s." = "ppdc: Unterminated string starting with %c on line %d of %s.";
1633 "ppdc: Warning - overlapping filename \"%s\"." = "ppdc: Warning - overlapping filename “%s”.";
1634 "ppdc: Writing %s." = "ppdc: Writing %s.";
1635 "ppdc: Writing PPD files to directory \"%s\"." = "ppdc: Writing PPD files to directory “%s”.";
1636 "ppdmerge: Bad LanguageVersion \"%s\" in %s." = "ppdmerge: Bad LanguageVersion “%s” in %s.";
1637 "ppdmerge: Ignoring PPD file %s." = "ppdmerge: Ignoring PPD file %s.";
1638 "ppdmerge: Unable to backup %s to %s - %s" = "ppdmerge: Unable to backup %s to %s - %s";
1639 "printer %s disabled since %s -" = "printer %s disabled since %s -";
1640 "printer %s is holding new jobs. enabled since %s" = "printer %s is holding new jobs. enabled since %s";
1641 "printer %s is idle. enabled since %s" = "printer %s is idle. enabled since %s";
1642 "printer %s now printing %s-%d. enabled since %s" = "printer %s now printing %s-%d. enabled since %s";
1643 "printer %s/%s disabled since %s -" = "printer %s/%s disabled since %s -";
1644 "printer %s/%s is idle. enabled since %s" = "printer %s/%s is idle. enabled since %s";
1645 "printer %s/%s now printing %s-%d. enabled since %s" = "printer %s/%s now printing %s-%d. enabled since %s";
1646 "processing" = "processing";
1647 "request id is %s-%d (%d file(s))" = "request id is %s-%d (%d file(s))";
1648 "request-id uses indefinite length" = "request-id uses indefinite length";
1649 "scheduler is not running" = "scheduler is not running";
1650 "scheduler is running" = "scheduler is running";
1651 "stat of %s failed: %s" = "stat of %s failed: %s";
1652 "status\t\tShow status of daemon and queue." = "status\t\tShow status of daemon and queue.";
1653 "stopped" = "stopped";
1654 "system default destination: %s" = "system default destination: %s";
1655 "system default destination: %s/%s" = "system default destination: %s/%s";
1656 "unknown" = "unknown";
1657 "untitled" = "untitled";
1658 "variable-bindings uses indefinite length" = "variable-bindings uses indefinite length";
1659 "~/.cups/lpoptions file names default destination that does not exist." = "~/.cups/lpoptions file names default destination that does not exist.";
1660 "accuracy-units" = "Accuracy Units";
1661 "accuracy-units.mm" = "Millimeters";
1662 "accuracy-units.nm" = "Nanometers";
1663 "accuracy-units.um" = "Micrometers";
1664 "baling" = "Bale Output";
1665 "baling-type" = "Bale Using";
1666 "baling-type.band" = "Band";
1667 "baling-type.shrink-wrap" = "Shrink Wrap";
1668 "baling-type.wrap" = "Wrap";
1669 "baling-when" = "Bale After";
1670 "baling-when.after-job" = "Job";
1671 "baling-when.after-sets" = "Sets";
1672 "binding" = "Bind Output";
1673 "binding-reference-edge" = "Bind Edge";
1674 "binding-reference-edge.bottom" = "Bottom";
1675 "binding-reference-edge.left" = "Left";
1676 "binding-reference-edge.right" = "Right";
1677 "binding-reference-edge.top" = "Top";
1678 "binding-type" = "Binder Type";
1679 "binding-type.adhesive" = "Adhesive";
1680 "binding-type.comb" = "Comb";
1681 "binding-type.flat" = "Flat";
1682 "binding-type.padding" = "Padding";
1683 "binding-type.perfect" = "Perfect";
1684 "binding-type.spiral" = "Spiral";
1685 "binding-type.tape" = "Tape";
1686 "binding-type.velo" = "Velo";
1687 "charge-info-message" = "Print Job Cost";
1688 "coating" = "Coat Sheets";
1689 "coating-sides" = "Add Coating To";
1690 "coating-sides.back" = "Back";
1691 "coating-sides.both" = "Front and Back";
1692 "coating-sides.front" = "Front";
1693 "coating-type" = "Type of Coating";
1694 "coating-type.archival" = "Archival";
1695 "coating-type.archival-glossy" = "Archival Glossy";
1696 "coating-type.archival-matte" = "Archival Matte";
1697 "coating-type.archival-semi-gloss" = "Archival Semi Gloss";
1698 "coating-type.glossy" = "Glossy";
1699 "coating-type.high-gloss" = "High Gloss";
1700 "coating-type.matte" = "Matte";
1701 "coating-type.semi-gloss" = "Semi-gloss";
1702 "coating-type.silicone" = "Silicone";
1703 "coating-type.translucent" = "Translucent";
1704 "confirmation-sheet-print" = "Print Confirmation Sheet";
1705 "copies" = "Copies";
1706 "cover-back" = "Back Cover";
1707 "cover-front" = "Front Cover";
1708 "cover-sheet-info" = "Cover Sheet Info";
1709 "cover-sheet-info-supported.date-time" = "Date Time";
1710 "cover-sheet-info-supported.from-name" = "From Name";
1711 "cover-sheet-info-supported.logo" = "Logo";
1712 "cover-sheet-info-supported.message" = "Message";
1713 "cover-sheet-info-supported.organization" = "Organization";
1714 "cover-sheet-info-supported.subject" = "Subject";
1715 "cover-sheet-info-supported.to-name" = "To Name";
1716 "cover-type" = "Printed Cover";
1717 "cover-type.no-cover" = "No Cover";
1718 "cover-type.print-back" = "Back Only";
1719 "cover-type.print-both" = "Front and Back";
1720 "cover-type.print-front" = "Front Only";
1721 "cover-type.print-none" = "None";
1722 "covering" = "Cover Output";
1723 "covering-name" = "Add Cover";
1724 "covering-name.plain" = "Plain";
1725 "covering-name.pre-cut" = "Pre-cut";
1726 "covering-name.pre-printed" = "Pre-printed";
1727 "detailed-status-message" = "Detailed Status Message";
1728 "document-copies" = "Copies";
1729 "document-state" = "Document State";
1730 "document-state-reasons" = "Detailed Document State";
1731 "document-state-reasons.aborted-by-system" = "Aborted By System";
1732 "document-state-reasons.canceled-at-device" = "Canceled At Device";
1733 "document-state-reasons.canceled-by-operator" = "Canceled By Operator";
1734 "document-state-reasons.canceled-by-user" = "Canceled By User";
1735 "document-state-reasons.completed-successfully" = "Completed Successfully";
1736 "document-state-reasons.completed-with-errors" = "Completed With Errors";
1737 "document-state-reasons.completed-with-warnings" = "Completed With Warnings";
1738 "document-state-reasons.compression-error" = "Compression Error";
1739 "document-state-reasons.data-insufficient" = "Data Insufficient";
1740 "document-state-reasons.digital-signature-did-not-verify" = "Digital Signature Did Not Verify";
1741 "document-state-reasons.digital-signature-type-not-supported" = "Digital Signature Type Not Supported";
1742 "document-state-reasons.digital-signature-wait" = "Digital Signature Wait";
1743 "document-state-reasons.document-access-error" = "Document Access Error";
1744 "document-state-reasons.document-fetchable" = "Document Fetchable";
1745 "document-state-reasons.document-format-error" = "Document Format Error";
1746 "document-state-reasons.document-password-error" = "Document Password Error";
1747 "document-state-reasons.document-permission-error" = "Document Permission Error";
1748 "document-state-reasons.document-security-error" = "Document Security Error";
1749 "document-state-reasons.document-unprintable-error" = "Document Unprintable Error";
1750 "document-state-reasons.errors-detected" = "Errors Detected";
1751 "document-state-reasons.incoming" = "Incoming";
1752 "document-state-reasons.interpreting" = "Interpreting";
1753 "document-state-reasons.none" = "None";
1754 "document-state-reasons.outgoing" = "Outgoing";
1755 "document-state-reasons.printing" = "Printing";
1756 "document-state-reasons.processing-to-stop-point" = "Processing To Stop Point";
1757 "document-state-reasons.queued" = "Queued";
1758 "document-state-reasons.queued-for-marker" = "Queued For Marker";
1759 "document-state-reasons.queued-in-device" = "Queued In Device";
1760 "document-state-reasons.resources-are-not-ready" = "Resources Are Not Ready";
1761 "document-state-reasons.resources-are-not-supported" = "Resources Are Not Supported";
1762 "document-state-reasons.submission-interrupted" = "Submission Interrupted";
1763 "document-state-reasons.transforming" = "Transforming";
1764 "document-state-reasons.unsupported-compression" = "Unsupported Compression";
1765 "document-state-reasons.unsupported-document-format" = "Unsupported Document Format";
1766 "document-state-reasons.warnings-detected" = "Warnings Detected";
1767 "document-state.3" = "Pending";
1768 "document-state.5" = "Processing";
1769 "document-state.6" = "Stopped";
1770 "document-state.7" = "Canceled";
1771 "document-state.8" = "Aborted";
1772 "document-state.9" = "Completed";
1773 "feed-orientation" = "Feed Orientation";
1774 "feed-orientation.long-edge-first" = "Long Edge First";
1775 "feed-orientation.short-edge-first" = "Short Edge First";
1776 "fetch-status-code" = "Fetch Status Code";
1777 "finishing-template" = "Finishing Template";
1778 "finishing-template.bale" = "Bale";
1779 "finishing-template.bind" = "Bind";
1780 "finishing-template.bind-bottom" = "Bind Bottom";
1781 "finishing-template.bind-left" = "Bind Left";
1782 "finishing-template.bind-right" = "Bind Right";
1783 "finishing-template.bind-top" = "Bind Top";
1784 "finishing-template.booklet-maker" = "Booklet Maker";
1785 "finishing-template.coat" = "Coat";
1786 "finishing-template.cover" = "Cover";
1787 "finishing-template.edge-stitch" = "Edge Stitch";
1788 "finishing-template.edge-stitch-bottom" = "Edge Stitch Bottom";
1789 "finishing-template.edge-stitch-left" = "Edge Stitch Left";
1790 "finishing-template.edge-stitch-right" = "Edge Stitch Right";
1791 "finishing-template.edge-stitch-top" = "Edge Stitch Top";
1792 "finishing-template.fold" = "Fold";
1793 "finishing-template.fold-accordion" = "Accordion Fold";
1794 "finishing-template.fold-double-gate" = "Double Gate Fold";
1795 "finishing-template.fold-engineering-z" = "Engineering Z Fold";
1796 "finishing-template.fold-gate" = "Gate Fold";
1797 "finishing-template.fold-half" = "Half Fold";
1798 "finishing-template.fold-half-z" = "Half Z Fold";
1799 "finishing-template.fold-left-gate" = "Left Gate Fold";
1800 "finishing-template.fold-letter" = "Letter Fold";
1801 "finishing-template.fold-parallel" = "Parallel Fold";
1802 "finishing-template.fold-poster" = "Poster Fold";
1803 "finishing-template.fold-right-gate" = "Right Gate Fold";
1804 "finishing-template.fold-z" = "Z Fold";
1805 "finishing-template.jdf-f10-1" = "JDF Fold F10-1";
1806 "finishing-template.jdf-f10-2" = "JDF Fold F10-2";
1807 "finishing-template.jdf-f10-3" = "JDF Fold F10-3";
1808 "finishing-template.jdf-f12-1" = "JDF Fold F12-1";
1809 "finishing-template.jdf-f12-10" = "JDF Fold F12-10";
1810 "finishing-template.jdf-f12-11" = "JDF Fold F12-11";
1811 "finishing-template.jdf-f12-12" = "JDF Fold F12-12";
1812 "finishing-template.jdf-f12-13" = "JDF Fold F12-13";
1813 "finishing-template.jdf-f12-14" = "JDF Fold F12-14";
1814 "finishing-template.jdf-f12-2" = "JDF Fold F12-2";
1815 "finishing-template.jdf-f12-3" = "JDF Fold F12-3";
1816 "finishing-template.jdf-f12-4" = "JDF Fold F12-4";
1817 "finishing-template.jdf-f12-5" = "JDF Fold F12-5";
1818 "finishing-template.jdf-f12-6" = "JDF Fold F12-6";
1819 "finishing-template.jdf-f12-7" = "JDF Fold F12-7";
1820 "finishing-template.jdf-f12-8" = "JDF Fold F12-8";
1821 "finishing-template.jdf-f12-9" = "JDF Fold F12-9";
1822 "finishing-template.jdf-f14-1" = "JDF Fold F14-1";
1823 "finishing-template.jdf-f16-1" = "JDF Fold F16-1";
1824 "finishing-template.jdf-f16-10" = "JDF Fold F16-10";
1825 "finishing-template.jdf-f16-11" = "JDF Fold F16-11";
1826 "finishing-template.jdf-f16-12" = "JDF Fold F16-12";
1827 "finishing-template.jdf-f16-13" = "JDF Fold F16-13";
1828 "finishing-template.jdf-f16-14" = "JDF Fold F16-14";
1829 "finishing-template.jdf-f16-2" = "JDF Fold F16-2";
1830 "finishing-template.jdf-f16-3" = "JDF Fold F16-3";
1831 "finishing-template.jdf-f16-4" = "JDF Fold F16-4";
1832 "finishing-template.jdf-f16-5" = "JDF Fold F16-5";
1833 "finishing-template.jdf-f16-6" = "JDF Fold F16-6";
1834 "finishing-template.jdf-f16-7" = "JDF Fold F16-7";
1835 "finishing-template.jdf-f16-8" = "JDF Fold F16-8";
1836 "finishing-template.jdf-f16-9" = "JDF Fold F16-9";
1837 "finishing-template.jdf-f18-1" = "JDF Fold F18-1";
1838 "finishing-template.jdf-f18-2" = "JDF Fold F18-2";
1839 "finishing-template.jdf-f18-3" = "JDF Fold F18-3";
1840 "finishing-template.jdf-f18-4" = "JDF Fold F18-4";
1841 "finishing-template.jdf-f18-5" = "JDF Fold F18-5";
1842 "finishing-template.jdf-f18-6" = "JDF Fold F18-6";
1843 "finishing-template.jdf-f18-7" = "JDF Fold F18-7";
1844 "finishing-template.jdf-f18-8" = "JDF Fold F18-8";
1845 "finishing-template.jdf-f18-9" = "JDF Fold F18-9";
1846 "finishing-template.jdf-f2-1" = "JDF Fold F2-1";
1847 "finishing-template.jdf-f20-1" = "JDF Fold F20-1";
1848 "finishing-template.jdf-f20-2" = "JDF Fold F20-2";
1849 "finishing-template.jdf-f24-1" = "JDF Fold F24-1";
1850 "finishing-template.jdf-f24-10" = "JDF Fold F24-10";
1851 "finishing-template.jdf-f24-11" = "JDF Fold F24-11";
1852 "finishing-template.jdf-f24-2" = "JDF Fold F24-2";
1853 "finishing-template.jdf-f24-3" = "JDF Fold F24-3";
1854 "finishing-template.jdf-f24-4" = "JDF Fold F24-4";
1855 "finishing-template.jdf-f24-5" = "JDF Fold F24-5";
1856 "finishing-template.jdf-f24-6" = "JDF Fold F24-6";
1857 "finishing-template.jdf-f24-7" = "JDF Fold F24-7";
1858 "finishing-template.jdf-f24-8" = "JDF Fold F24-8";
1859 "finishing-template.jdf-f24-9" = "JDF Fold F24-9";
1860 "finishing-template.jdf-f28-1" = "JDF Fold F28-1";
1861 "finishing-template.jdf-f32-1" = "JDF Fold F32-1";
1862 "finishing-template.jdf-f32-2" = "JDF Fold F32-2";
1863 "finishing-template.jdf-f32-3" = "JDF Fold F32-3";
1864 "finishing-template.jdf-f32-4" = "JDF Fold F32-4";
1865 "finishing-template.jdf-f32-5" = "JDF Fold F32-5";
1866 "finishing-template.jdf-f32-6" = "JDF Fold F32-6";
1867 "finishing-template.jdf-f32-7" = "JDF Fold F32-7";
1868 "finishing-template.jdf-f32-8" = "JDF Fold F32-8";
1869 "finishing-template.jdf-f32-9" = "JDF Fold F32-9";
1870 "finishing-template.jdf-f36-1" = "JDF Fold F36-1";
1871 "finishing-template.jdf-f36-2" = "JDF Fold F36-2";
1872 "finishing-template.jdf-f4-1" = "JDF Fold F4-1";
1873 "finishing-template.jdf-f4-2" = "JDF Fold F4-2";
1874 "finishing-template.jdf-f40-1" = "JDF Fold F40-1";
1875 "finishing-template.jdf-f48-1" = "JDF Fold F48-1";
1876 "finishing-template.jdf-f48-2" = "JDF Fold F48-2";
1877 "finishing-template.jdf-f6-1" = "JDF Fold F6-1";
1878 "finishing-template.jdf-f6-2" = "JDF Fold F6-2";
1879 "finishing-template.jdf-f6-3" = "JDF Fold F6-3";
1880 "finishing-template.jdf-f6-4" = "JDF Fold F6-4";
1881 "finishing-template.jdf-f6-5" = "JDF Fold F6-5";
1882 "finishing-template.jdf-f6-6" = "JDF Fold F6-6";
1883 "finishing-template.jdf-f6-7" = "JDF Fold F6-7";
1884 "finishing-template.jdf-f6-8" = "JDF Fold F6-8";
1885 "finishing-template.jdf-f64-1" = "JDF Fold F64-1";
1886 "finishing-template.jdf-f64-2" = "JDF Fold F64-2";
1887 "finishing-template.jdf-f8-1" = "JDF Fold F8-1";
1888 "finishing-template.jdf-f8-2" = "JDF Fold F8-2";
1889 "finishing-template.jdf-f8-3" = "JDF Fold F8-3";
1890 "finishing-template.jdf-f8-4" = "JDF Fold F8-4";
1891 "finishing-template.jdf-f8-5" = "JDF Fold F8-5";
1892 "finishing-template.jdf-f8-6" = "JDF Fold F8-6";
1893 "finishing-template.jdf-f8-7" = "JDF Fold F8-7";
1894 "finishing-template.jog-offset" = "Jog Offset";
1895 "finishing-template.laminate" = "Laminate";
1896 "finishing-template.punch" = "Punch";
1897 "finishing-template.punch-bottom-left" = "Punch Bottom Left";
1898 "finishing-template.punch-bottom-right" = "Punch Bottom Right";
1899 "finishing-template.punch-dual-bottom" = "2-hole Punch Bottom";
1900 "finishing-template.punch-dual-left" = "2-hole Punch Left";
1901 "finishing-template.punch-dual-right" = "2-hole Punch Right";
1902 "finishing-template.punch-dual-top" = "2-hole Punch Top";
1903 "finishing-template.punch-multiple-bottom" = "Multi-hole Punch Bottom";
1904 "finishing-template.punch-multiple-left" = "Multi-hole Punch Left";
1905 "finishing-template.punch-multiple-right" = "Multi-hole Punch Right";
1906 "finishing-template.punch-multiple-top" = "Multi-hole Punch Top";
1907 "finishing-template.punch-quad-bottom" = "4-hole Punch Bottom";
1908 "finishing-template.punch-quad-left" = "4-hole Punch Left";
1909 "finishing-template.punch-quad-right" = "4-hole Punch Right";
1910 "finishing-template.punch-quad-top" = "4-hole Punch Top";
1911 "finishing-template.punch-top-left" = "Punch Top Left";
1912 "finishing-template.punch-top-right" = "Punch Top Right";
1913 "finishing-template.punch-triple-bottom" = "3-hole Punch Bottom";
1914 "finishing-template.punch-triple-left" = "3-hole Punch Left";
1915 "finishing-template.punch-triple-right" = "3-hole Punch Right";
1916 "finishing-template.punch-triple-top" = "3-hole Punch Top";
1917 "finishing-template.saddle-stitch" = "Saddle Stitch";
1918 "finishing-template.staple" = "Staple";
1919 "finishing-template.staple-bottom-left" = "Staple Bottom Left";
1920 "finishing-template.staple-bottom-right" = "Staple Bottom Right";
1921 "finishing-template.staple-dual-bottom" = "2 Staples on Bottom";
1922 "finishing-template.staple-dual-left" = "2 Staples on Left";
1923 "finishing-template.staple-dual-right" = "2 Staples on Right";
1924 "finishing-template.staple-dual-top" = "2 Staples on Top";
1925 "finishing-template.staple-top-left" = "Staple Top Left";
1926 "finishing-template.staple-top-right" = "Staple Top Right";
1927 "finishing-template.staple-triple-bottom" = "3 Staples on Bottom";
1928 "finishing-template.staple-triple-left" = "3 Staples on Left";
1929 "finishing-template.staple-triple-right" = "3 Staples on Right";
1930 "finishing-template.staple-triple-top" = "3 Staples on Top";
1931 "finishing-template.trim" = "Trim";
1932 "finishing-template.trim-after-copies" = "Trim After Every Set";
1933 "finishing-template.trim-after-documents" = "Trim After Every Document";
1934 "finishing-template.trim-after-job" = "Trim After Job";
1935 "finishing-template.trim-after-pages" = "Trim After Every Page";
1936 "finishings" = "Finishings";
1937 "finishings-col" = "Finishings";
1938 "finishings.10" = "Fold";
1939 "finishings.100" = "Z Fold";
1940 "finishings.101" = "Engineering Z Fold";
1941 "finishings.11" = "Trim";
1942 "finishings.12" = "Bale";
1943 "finishings.13" = "Booklet Maker";
1944 "finishings.14" = "Jog Offset";
1945 "finishings.15" = "Coat";
1946 "finishings.16" = "Laminate";
1947 "finishings.20" = "Staple Top Left";
1948 "finishings.21" = "Staple Bottom Left";
1949 "finishings.22" = "Staple Top Right";
1950 "finishings.23" = "Staple Bottom Right";
1951 "finishings.24" = "Edge Stitch Left";
1952 "finishings.25" = "Edge Stitch Top";
1953 "finishings.26" = "Edge Stitch Right";
1954 "finishings.27" = "Edge Stitch Bottom";
1955 "finishings.28" = "2 Staples on Left";
1956 "finishings.29" = "2 Staples on Top";
1957 "finishings.3" = "None";
1958 "finishings.30" = "2 Staples on Right";
1959 "finishings.31" = "2 Staples on Bottom";
1960 "finishings.32" = "3 Staples on Left";
1961 "finishings.33" = "3 Staples on Top";
1962 "finishings.34" = "3 Staples on Right";
1963 "finishings.35" = "3 Staples on Bottom";
1964 "finishings.4" = "Staple";
1965 "finishings.5" = "Punch";
1966 "finishings.50" = "Bind Left";
1967 "finishings.51" = "Bind Top";
1968 "finishings.52" = "Bind Right";
1969 "finishings.53" = "Bind Bottom";
1970 "finishings.6" = "Cover";
1971 "finishings.60" = "Trim Pages";
1972 "finishings.61" = "Trim Documents";
1973 "finishings.62" = "Trim Copies";
1974 "finishings.63" = "Trim Job";
1975 "finishings.7" = "Bind";
1976 "finishings.70" = "Punch Top Left";
1977 "finishings.71" = "Punch Bottom Left";
1978 "finishings.72" = "Punch Top Right";
1979 "finishings.73" = "Punch Bottom Right";
1980 "finishings.74" = "2-hole Punch Left";
1981 "finishings.75" = "2-hole Punch Top";
1982 "finishings.76" = "2-hole Punch Right";
1983 "finishings.77" = "2-hole Punch Bottom";
1984 "finishings.78" = "3-hole Punch Left";
1985 "finishings.79" = "3-hole Punch Top";
1986 "finishings.8" = "Saddle Stitch";
1987 "finishings.80" = "3-hole Punch Right";
1988 "finishings.81" = "3-hole Punch Bottom";
1989 "finishings.82" = "4-hole Punch Left";
1990 "finishings.83" = "4-hole Punch Top";
1991 "finishings.84" = "4-hole Punch Right";
1992 "finishings.85" = "4-hole Punch Bottom";
1993 "finishings.86" = "Multi-hole Punch Left";
1994 "finishings.87" = "Multi-hole Punch Top";
1995 "finishings.88" = "Multi-hole Punch Right";
1996 "finishings.89" = "Multi-hole Punch Bottom";
1997 "finishings.9" = "Edge Stitch";
1998 "finishings.90" = "Accordion Fold";
1999 "finishings.91" = "Double Gate Fold";
2000 "finishings.92" = "Gate Fold";
2001 "finishings.93" = "Half Fold";
2002 "finishings.94" = "Half Z Fold";
2003 "finishings.95" = "Left Gate Fold";
2004 "finishings.96" = "Letter Fold";
2005 "finishings.97" = "Parallel Fold";
2006 "finishings.98" = "Poster Fold";
2007 "finishings.99" = "Right Gate Fold";
2009 "folding-direction" = "Fold Direction";
2010 "folding-direction.inward" = "Inward";
2011 "folding-direction.outward" = "Outward";
2012 "folding-offset" = "Fold Position";
2013 "folding-reference-edge" = "Fold Edge";
2014 "folding-reference-edge.bottom" = "Bottom";
2015 "folding-reference-edge.left" = "Left";
2016 "folding-reference-edge.right" = "Right";
2017 "folding-reference-edge.top" = "Top";
2018 "font-name-requested" = "Font Name";
2019 "font-size-requested" = "Font Size";
2020 "force-front-side" = "Force Front Side";
2021 "from-name" = "From Name";
2022 "imposition-template" = "Imposition Template";
2023 "imposition-template.none" = "None";
2024 "imposition-template.signature" = "Signature";
2025 "input-attributes" = "Scanner Options";
2026 "input-auto-scaling" = "Scan Auto Scaling";
2027 "input-auto-skew-correction" = "Scan Auto Skew Correction";
2028 "input-brightness" = "Scan Brightness";
2029 "input-color-mode" = "Scanning Mode";
2030 "input-color-mode.auto" = "Automatic";
2031 "input-color-mode.bi-level" = "Text";
2032 "input-color-mode.cmyk_16" = "16-bit CMYK";
2033 "input-color-mode.cmyk_8" = "8-bit CMYK";
2034 "input-color-mode.color" = "Color";
2035 "input-color-mode.color_8" = "8-bit Color";
2036 "input-color-mode.monochrome" = "Monochrome";
2037 "input-color-mode.monochrome_16" = "16-bit Monochrome";
2038 "input-color-mode.monochrome_4" = "4-bit Monochrome";
2039 "input-color-mode.monochrome_8" = "8-bit Monochrome";
2040 "input-color-mode.rgb_16" = "16-bit RGB";
2041 "input-color-mode.rgba_16" = "16-bit RGBA";
2042 "input-color-mode.rgba_8" = "8-bit RGBA";
2043 "input-content-type" = "Scan Content";
2044 "input-content-type.auto" = "Automatic";
2045 "input-content-type.halftone" = "Halftone";
2046 "input-content-type.line-art" = "Line Art";
2047 "input-content-type.magazine" = "Magazine";
2048 "input-content-type.photo" = "Photo";
2049 "input-content-type.text" = "Text";
2050 "input-content-type.text-and-photo" = "Text And Photo";
2051 "input-contrast" = "Scan Contrast";
2052 "input-film-scan-mode" = "Film Type";
2053 "input-film-scan-mode.black-and-white-negative-film" = "Black And White Negative Film";
2054 "input-film-scan-mode.color-negative-film" = "Color Negative Film";
2055 "input-film-scan-mode.color-slide-film" = "Color Slide Film";
2056 "input-film-scan-mode.not-applicable" = "Not Applicable";
2057 "input-images-to-transfer" = "Scan Images To Transfer";
2058 "input-media" = "Scan Media";
2059 "input-media.auto" = "Automatic";
2060 "input-orientation-requested" = "Scan Orientation";
2061 "input-quality" = "Scan Quality";
2062 "input-resolution" = "Scan Resolution";
2063 "input-scaling-height" = "Scan Scaling Height";
2064 "input-scaling-width" = "Scan Scaling Width";
2065 "input-scan-regions" = "Scan Regions";
2066 "input-sharpness" = "Scan Sharpness";
2067 "input-sides" = "2-Sided Scanning";
2068 "input-source" = "Scan Source";
2069 "input-source.adf" = "Automatic Document Feeder";
2070 "input-source.film-reader" = "Film Reader";
2071 "input-source.platen" = "Platen";
2072 "insert-after-page-number" = "Insert Page Number";
2073 "insert-count" = "Insert Count";
2074 "insert-sheet" = "Insert Sheet";
2075 "job-account-id" = "Job Account ID";
2076 "job-account-type" = "Job Account Type";
2077 "job-account-type.general" = "General";
2078 "job-account-type.group" = "Group";
2079 "job-account-type.none" = "None";
2080 "job-accounting-output-bin" = "Job Accounting Output Bin";
2081 "job-accounting-sheets" = "Job Accounting Sheets";
2082 "job-accounting-sheets-type" = "Type of Job Accounting Sheets";
2083 "job-accounting-sheets-type.none" = "None";
2084 "job-accounting-sheets-type.standard" = "Standard";
2085 "job-accounting-user-id" = "Job Accounting User ID";
2086 "job-collation-type" = "Collate Copies";
2087 "job-collation-type.3" = "Uncollated Sheets";
2088 "job-collation-type.4" = "Collated Documents";
2089 "job-collation-type.5" = "Uncollated Documents";
2090 "job-copies" = "Copies";
2091 "job-cover-back" = "Back Cover";
2092 "job-cover-front" = "Front Cover";
2093 "job-delay-output-until" = "Delay Output Until";
2094 "job-delay-output-until-time" = "Delay Output Until";
2095 "job-delay-output-until.day-time" = "Daytime";
2096 "job-delay-output-until.evening" = "Evening";
2097 "job-delay-output-until.indefinite" = "Released";
2098 "job-delay-output-until.night" = "Night";
2099 "job-delay-output-until.no-delay-output" = "No Delay";
2100 "job-delay-output-until.second-shift" = "Second Shift";
2101 "job-delay-output-until.third-shift" = "Third Shift";
2102 "job-delay-output-until.weekend" = "Weekend";
2103 "job-error-action" = "On Error";
2104 "job-error-action.abort-job" = "Abort Job";
2105 "job-error-action.cancel-job" = "Cancel Job";
2106 "job-error-action.continue-job" = "Continue Job";
2107 "job-error-action.suspend-job" = "Suspend Job";
2108 "job-error-sheet" = "Print Error Sheet";
2109 "job-error-sheet-type" = "Type of Error Sheet";
2110 "job-error-sheet-type.none" = "None";
2111 "job-error-sheet-type.standard" = "Standard";
2112 "job-error-sheet-when" = "Print Error Sheet";
2113 "job-error-sheet-when.always" = "Always";
2114 "job-error-sheet-when.on-error" = "On Error";
2115 "job-finishings" = "Job Finishings";
2116 "job-hold-until" = "Hold Until";
2117 "job-hold-until-time" = "Hold Until";
2118 "job-hold-until.day-time" = "Daytime";
2119 "job-hold-until.evening" = "Evening";
2120 "job-hold-until.indefinite" = "Released";
2121 "job-hold-until.night" = "Night";
2122 "job-hold-until.no-hold" = "No Hold";
2123 "job-hold-until.second-shift" = "Second Shift";
2124 "job-hold-until.third-shift" = "Third Shift";
2125 "job-hold-until.weekend" = "Weekend";
2126 "job-mandatory-attributes" = "Job Mandatory Attributes";
2127 "job-name" = "Title";
2128 "job-phone-number" = "Job Phone Number";
2129 "job-priority" = "Job Priority";
2130 "job-recipient-name" = "Job Recipient Name";
2131 "job-save-disposition" = "Job Save Disposition";
2132 "job-sheet-message" = "Job Sheet Message";
2133 "job-sheets" = "Banner Page";
2134 "job-sheets-col" = "Banner Page";
2135 "job-sheets.first-print-stream-page" = "First Page in Document";
2136 "job-sheets.job-both-sheet" = "Start and End Sheets";
2137 "job-sheets.job-end-sheet" = "End Sheet";
2138 "job-sheets.job-start-sheet" = "Start Sheet";
2139 "job-sheets.none" = "None";
2140 "job-sheets.standard" = "Standard";
2141 "job-state" = "Job State";
2142 "job-state-message" = "Job State Message";
2143 "job-state-reasons" = "Detailed Job State";
2144 "job-state-reasons.aborted-by-system" = "Aborted By System";
2145 "job-state-reasons.account-authorization-failed" = "Account Authorization Failed";
2146 "job-state-reasons.account-closed" = "Account Closed";
2147 "job-state-reasons.account-info-needed" = "Account Info Needed";
2148 "job-state-reasons.account-limit-reached" = "Account Limit Reached";
2149 "job-state-reasons.compression-error" = "Compression Error";
2150 "job-state-reasons.conflicting-attributes" = "Conflicting Attributes";
2151 "job-state-reasons.connected-to-destination" = "Connected To Destination";
2152 "job-state-reasons.connecting-to-destination" = "Connecting To Destination";
2153 "job-state-reasons.destination-uri-failed" = "Destination Uri Failed";
2154 "job-state-reasons.digital-signature-did-not-verify" = "Digital Signature Did Not Verify";
2155 "job-state-reasons.digital-signature-type-not-supported" = "Digital Signature Type Not Supported";
2156 "job-state-reasons.document-access-error" = "Document Access Error";
2157 "job-state-reasons.document-format-error" = "Document Format Error";
2158 "job-state-reasons.document-password-error" = "Document Password Error";
2159 "job-state-reasons.document-permission-error" = "Document Permission Error";
2160 "job-state-reasons.document-security-error" = "Document Security Error";
2161 "job-state-reasons.document-unprintable-error" = "Document Unprintable Error";
2162 "job-state-reasons.errors-detected" = "Errors Detected";
2163 "job-state-reasons.job-canceled-at-device" = "Job Canceled At Device";
2164 "job-state-reasons.job-canceled-by-operator" = "Job Canceled By Operator";
2165 "job-state-reasons.job-canceled-by-user" = "Job Canceled By User";
2166 "job-state-reasons.job-completed-successfully" = "Job Completed Successfully";
2167 "job-state-reasons.job-completed-with-errors" = "Job Completed With Errors";
2168 "job-state-reasons.job-completed-with-warnings" = "Job Completed With Warnings";
2169 "job-state-reasons.job-data-insufficient" = "Job Data Insufficient";
2170 "job-state-reasons.job-delay-output-until-specified" = "Job Delay Output Until Specified";
2171 "job-state-reasons.job-digital-signature-wait" = "Job Digital Signature Wait";
2172 "job-state-reasons.job-fetchable" = "Job Fetchable";
2173 "job-state-reasons.job-held-for-review" = "Job Held For Review";
2174 "job-state-reasons.job-hold-until-specified" = "Job Hold Until Specified";
2175 "job-state-reasons.job-incoming" = "Job Incoming";
2176 "job-state-reasons.job-interpreting" = "Job Interpreting";
2177 "job-state-reasons.job-outgoing" = "Job Outgoing";
2178 "job-state-reasons.job-password-wait" = "Job Password Wait";
2179 "job-state-reasons.job-printed-successfully" = "Job Printed Successfully";
2180 "job-state-reasons.job-printed-with-errors" = "Job Printed With Errors";
2181 "job-state-reasons.job-printed-with-warnings" = "Job Printed With Warnings";
2182 "job-state-reasons.job-printing" = "Job Printing";
2183 "job-state-reasons.job-queued" = "Job Queued";
2184 "job-state-reasons.job-queued-for-marker" = "Job Queued For Marker";
2185 "job-state-reasons.job-release-wait" = "Job Release Wait";
2186 "job-state-reasons.job-restartable" = "Job Restartable";
2187 "job-state-reasons.job-resuming" = "Job Resuming";
2188 "job-state-reasons.job-saved-successfully" = "Job Saved Successfully";
2189 "job-state-reasons.job-saved-with-errors" = "Job Saved With Errors";
2190 "job-state-reasons.job-saved-with-warnings" = "Job Saved With Warnings";
2191 "job-state-reasons.job-saving" = "Job Saving";
2192 "job-state-reasons.job-spooling" = "Job Spooling";
2193 "job-state-reasons.job-streaming" = "Job Streaming";
2194 "job-state-reasons.job-suspended" = "Job Suspended";
2195 "job-state-reasons.job-suspended-by-operator" = "Job Suspended By Operator";
2196 "job-state-reasons.job-suspended-by-system" = "Job Suspended By System";
2197 "job-state-reasons.job-suspended-by-user" = "Job Suspended By User";
2198 "job-state-reasons.job-suspending" = "Job Suspending";
2199 "job-state-reasons.job-transferring" = "Job Transferring";
2200 "job-state-reasons.job-transforming" = "Job Transforming";
2201 "job-state-reasons.none" = "None";
2202 "job-state-reasons.printer-stopped" = "Printer Stopped";
2203 "job-state-reasons.printer-stopped-partly" = "Printer Stopped Partly";
2204 "job-state-reasons.processing-to-stop-point" = "Processing To Stop Point";
2205 "job-state-reasons.queued-in-device" = "Queued In Device";
2206 "job-state-reasons.resources-are-not-ready" = "Resources Are Not Ready";
2207 "job-state-reasons.resources-are-not-supported" = "Resources Are Not Supported";
2208 "job-state-reasons.service-off-line" = "Service Off Line";
2209 "job-state-reasons.submission-interrupted" = "Submission Interrupted";
2210 "job-state-reasons.unsupported-attributes-or-values" = "Unsupported Attributes Or Values";
2211 "job-state-reasons.unsupported-compression" = "Unsupported Compression";
2212 "job-state-reasons.unsupported-document-format" = "Unsupported Document Format";
2213 "job-state-reasons.waiting-for-user-action" = "Waiting For User Action";
2214 "job-state-reasons.warnings-detected" = "Warnings Detected";
2215 "job-state.3" = "Pending";
2216 "job-state.4" = "Held";
2217 "job-state.5" = "Processing";
2218 "job-state.6" = "Stopped";
2219 "job-state.7" = "Canceled";
2220 "job-state.8" = "Aborted";
2221 "job-state.9" = "Completed";
2222 "laminating" = "Laminate Pages";
2223 "laminating-sides" = "Laminate";
2224 "laminating-sides.back" = "Back Only";
2225 "laminating-sides.both" = "Front and Back";
2226 "laminating-sides.front" = "Front Only";
2227 "laminating-type" = "Type of Lamination";
2228 "laminating-type.archival" = "Archival";
2229 "laminating-type.glossy" = "Glossy";
2230 "laminating-type.high-gloss" = "High Gloss";
2231 "laminating-type.matte" = "Matte";
2232 "laminating-type.semi-gloss" = "Semi-gloss";
2233 "laminating-type.translucent" = "Translucent";
2235 "material-amount" = "Amount of Material";
2236 "material-amount-units" = "Amount Units";
2237 "material-amount-units.g" = "Grams";
2238 "material-amount-units.kg" = "Kilograms";
2239 "material-amount-units.l" = "Liters";
2240 "material-amount-units.m" = "Meters";
2241 "material-amount-units.ml" = "Milliliters";
2242 "material-amount-units.mm" = "Millimeters";
2243 "material-color" = "Material Color";
2244 "material-diameter" = "Material Diameter";
2245 "material-diameter-tolerance" = "Material Diameter Tolerance";
2246 "material-fill-density" = "Material Fill Density";
2247 "material-name" = "Material Name";
2248 "material-purpose" = "Use Material For";
2249 "material-purpose.all" = "Everything";
2250 "material-purpose.base" = "Base";
2251 "material-purpose.in-fill" = "In-fill";
2252 "material-purpose.shell" = "Shell";
2253 "material-purpose.support" = "Supports";
2254 "material-rate" = "Feed Rate";
2255 "material-rate-units" = "Feed Rate Units";
2256 "material-rate-units.mg_second" = "Milligrams per second";
2257 "material-rate-units.ml_second" = "Milliliters per second";
2258 "material-rate-units.mm_second" = "Millimeters per second";
2259 "material-shell-thickness" = "Material Shell Thickness";
2260 "material-temperature" = "Material Temperature";
2261 "material-type" = "Material Type";
2262 "material-type.abs" = "ABS";
2263 "material-type.abs-carbon-fiber" = "Carbon Fiber ABS";
2264 "material-type.abs-carbon-nanotube" = "Carbon Nanotube ABS";
2265 "material-type.chocolate" = "Chocolate";
2266 "material-type.gold" = "Gold";
2267 "material-type.nylon" = "Nylon";
2268 "material-type.pet" = "Pet";
2269 "material-type.photopolymer" = "Photopolymer";
2270 "material-type.pla" = "PLA";
2271 "material-type.pla-conductive" = "Conductive PLA";
2272 "material-type.pla-flexible" = "Flexible PLA";
2273 "material-type.pla-magnetic" = "Magnetic PLA";
2274 "material-type.pla-steel" = "Steel PLA";
2275 "material-type.pla-stone" = "Stone PLA";
2276 "material-type.pla-wood" = "Wood PLA";
2277 "material-type.polycarbonate" = "Polycarbonate";
2278 "material-type.pva-dissolvable" = "Dissolvable PVA";
2279 "material-type.silver" = "Silver";
2280 "material-type.titanium" = "Titanium";
2281 "material-type.wax" = "Wax";
2282 "materials-col" = "Materials";
2284 "media-back-coating" = "Back Coating of Media";
2285 "media-back-coating.glossy" = "Glossy";
2286 "media-back-coating.high-gloss" = "High Gloss";
2287 "media-back-coating.matte" = "Matte";
2288 "media-back-coating.none" = "None";
2289 "media-back-coating.satin" = "Satin";
2290 "media-back-coating.semi-gloss" = "Semi-gloss";
2291 "media-bottom-margin" = "Media Bottom Margin";
2292 "media-col" = "Media";
2293 "media-color" = "Media Color";
2294 "media-color.black" = "Black";
2295 "media-color.blue" = "Blue";
2296 "media-color.brown" = "Brown";
2297 "media-color.buff" = "Buff";
2298 "media-color.clear-black" = "Clear Black";
2299 "media-color.clear-blue" = "Clear Blue";
2300 "media-color.clear-brown" = "Clear Brown";
2301 "media-color.clear-buff" = "Clear Buff";
2302 "media-color.clear-cyan" = "Clear Cyan";
2303 "media-color.clear-gold" = "Clear Gold";
2304 "media-color.clear-goldenrod" = "Clear Goldenrod";
2305 "media-color.clear-gray" = "Clear Gray";
2306 "media-color.clear-green" = "Clear Green";
2307 "media-color.clear-ivory" = "Clear Ivory";
2308 "media-color.clear-magenta" = "Clear Magenta";
2309 "media-color.clear-multi-color" = "Clear Multi Color";
2310 "media-color.clear-mustard" = "Clear Mustard";
2311 "media-color.clear-orange" = "Clear Orange";
2312 "media-color.clear-pink" = "Clear Pink";
2313 "media-color.clear-red" = "Clear Red";
2314 "media-color.clear-silver" = "Clear Silver";
2315 "media-color.clear-turquoise" = "Clear Turquoise";
2316 "media-color.clear-violet" = "Clear Violet";
2317 "media-color.clear-white" = "Clear White";
2318 "media-color.clear-yellow" = "Clear Yellow";
2319 "media-color.cyan" = "Cyan";
2320 "media-color.dark-blue" = "Dark Blue";
2321 "media-color.dark-brown" = "Dark Brown";
2322 "media-color.dark-buff" = "Dark Buff";
2323 "media-color.dark-cyan" = "Dark Cyan";
2324 "media-color.dark-gold" = "Dark Gold";
2325 "media-color.dark-goldenrod" = "Dark Goldenrod";
2326 "media-color.dark-gray" = "Dark Gray";
2327 "media-color.dark-green" = "Dark Green";
2328 "media-color.dark-ivory" = "Dark Ivory";
2329 "media-color.dark-magenta" = "Dark Magenta";
2330 "media-color.dark-mustard" = "Dark Mustard";
2331 "media-color.dark-orange" = "Dark Orange";
2332 "media-color.dark-pink" = "Dark Pink";
2333 "media-color.dark-red" = "Dark Red";
2334 "media-color.dark-silver" = "Dark Silver";
2335 "media-color.dark-turquoise" = "Dark Turquoise";
2336 "media-color.dark-violet" = "Dark Violet";
2337 "media-color.dark-yellow" = "Dark Yellow";
2338 "media-color.gold" = "Gold";
2339 "media-color.goldenrod" = "Goldenrod";
2340 "media-color.gray" = "Gray";
2341 "media-color.green" = "Green";
2342 "media-color.ivory" = "Ivory";
2343 "media-color.light-black" = "Light Black";
2344 "media-color.light-blue" = "Light Blue";
2345 "media-color.light-brown" = "Light Brown";
2346 "media-color.light-buff" = "Light Buff";
2347 "media-color.light-cyan" = "Light Cyan";
2348 "media-color.light-gold" = "Light Gold";
2349 "media-color.light-goldenrod" = "Light Goldenrod";
2350 "media-color.light-gray" = "Light Gray";
2351 "media-color.light-green" = "Light Green";
2352 "media-color.light-ivory" = "Light Ivory";
2353 "media-color.light-magenta" = "Light Magenta";
2354 "media-color.light-mustard" = "Light Mustard";
2355 "media-color.light-orange" = "Light Orange";
2356 "media-color.light-pink" = "Light Pink";
2357 "media-color.light-red" = "Light Red";
2358 "media-color.light-silver" = "Light Silver";
2359 "media-color.light-turquoise" = "Light Turquoise";
2360 "media-color.light-violet" = "Light Violet";
2361 "media-color.light-yellow" = "Light Yellow";
2362 "media-color.magenta" = "Magenta";
2363 "media-color.multi-color" = "Multi-color";
2364 "media-color.mustard" = "Mustard";
2365 "media-color.no-color" = "No Color";
2366 "media-color.orange" = "Orange";
2367 "media-color.pink" = "Pink";
2368 "media-color.red" = "Red";
2369 "media-color.silver" = "Silver";
2370 "media-color.turquoise" = "Turquoise";
2371 "media-color.violet" = "Violet";
2372 "media-color.white" = "White";
2373 "media-color.yellow" = "Yellow";
2374 "media-front-coating" = "Front Coating of Media";
2375 "media-grain" = "Media Grain";
2376 "media-grain.x-direction" = "Cross-Feed Direction";
2377 "media-grain.y-direction" = "Feed Direction";
2378 "media-hole-count" = "Media Hole Count";
2379 "media-info" = "Media Info";
2380 "media-input-tray-check" = "Force Media";
2381 "media-left-margin" = "Media Left Margin";
2382 "media-pre-printed" = "Pre-printed Media";
2383 "media-pre-printed.blank" = "Blank";
2384 "media-pre-printed.letter-head" = "Letterhead";
2385 "media-pre-printed.pre-printed" = "Pre-printed";
2386 "media-recycled" = "Recycled Media";
2387 "media-recycled.none" = "None";
2388 "media-recycled.standard" = "Standard";
2389 "media-right-margin" = "Media Right Margin";
2390 "media-size" = "Media Dimensions";
2391 "media-size-name" = "Media Name";
2392 "media-source" = "Media Source";
2393 "media-source.alternate" = "Alternate Tray";
2394 "media-source.alternate-roll" = "Alternate Roll";
2395 "media-source.auto" = "Automatic Tray";
2396 "media-source.bottom" = "Bottom Tray";
2397 "media-source.by-pass-tray" = "By-pass Tray";
2398 "media-source.center" = "Center Tray";
2399 "media-source.disc" = "Disc Feed";
2400 "media-source.envelope" = "Envelope Feed";
2401 "media-source.hagaki" = "Hagaki Feed";
2402 "media-source.large-capacity" = "Large Capacity Tray";
2403 "media-source.left" = "Left Tray";
2404 "media-source.main" = "Main Tray";
2405 "media-source.main-roll" = "Main Roll";
2406 "media-source.manual" = "Manual Feed";
2407 "media-source.middle" = "Middle Tray";
2408 "media-source.photo" = "Photo Tray";
2409 "media-source.rear" = "Rear Tray";
2410 "media-source.right" = "Right Tray";
2411 "media-source.roll-1" = "Roll 1";
2412 "media-source.roll-10" = "Roll 10";
2413 "media-source.roll-2" = "Roll 2";
2414 "media-source.roll-3" = "Roll 3";
2415 "media-source.roll-4" = "Roll 4";
2416 "media-source.roll-5" = "Roll 5";
2417 "media-source.roll-6" = "Roll 6";
2418 "media-source.roll-7" = "Roll 7";
2419 "media-source.roll-8" = "Roll 8";
2420 "media-source.roll-9" = "Roll 9";
2421 "media-source.side" = "Side";
2422 "media-source.top" = "Top";
2423 "media-source.tray-1" = "Tray 1";
2424 "media-source.tray-10" = "Tray 10";
2425 "media-source.tray-11" = "Tray 11";
2426 "media-source.tray-12" = "Tray 12";
2427 "media-source.tray-13" = "Tray 13";
2428 "media-source.tray-14" = "Tray 14";
2429 "media-source.tray-15" = "Tray 15";
2430 "media-source.tray-16" = "Tray 16";
2431 "media-source.tray-17" = "Tray 17";
2432 "media-source.tray-18" = "Tray 18";
2433 "media-source.tray-19" = "Tray 19";
2434 "media-source.tray-2" = "Tray 2";
2435 "media-source.tray-20" = "Tray 20";
2436 "media-source.tray-3" = "Tray 3";
2437 "media-source.tray-4" = "Tray 4";
2438 "media-source.tray-5" = "Tray 5";
2439 "media-source.tray-6" = "Tray 6";
2440 "media-source.tray-7" = "Tray 7";
2441 "media-source.tray-8" = "Tray 8";
2442 "media-source.tray-9" = "Tray 9";
2443 "media-thickness" = "Media Thickness";
2444 "media-tooth" = "Media Tooth (Texture)";
2445 "media-tooth.antique" = "Antique";
2446 "media-tooth.calendared" = "Extra Smooth";
2447 "media-tooth.coarse" = "Coarse";
2448 "media-tooth.fine" = "Fine";
2449 "media-tooth.linen" = "Linen";
2450 "media-tooth.medium" = "Medium";
2451 "media-tooth.smooth" = "Smooth";
2452 "media-tooth.stipple" = "Stipple";
2453 "media-tooth.uncalendared" = "Rough";
2454 "media-tooth.vellum" = "Vellum";
2455 "media-top-margin" = "Media Top Margin";
2456 "media-type" = "Media Type";
2457 "media-type.aluminum" = "Aluminum";
2458 "media-type.auto" = "Automatic";
2459 "media-type.back-print-film" = "Back Print Film";
2460 "media-type.cardboard" = "Cardboard";
2461 "media-type.cardstock" = "Cardstock";
2462 "media-type.cd" = "CD";
2463 "media-type.com.hp.advanced-photo" = "Advanced Photo Paper";
2464 "media-type.com.hp.brochure-glossy" = "Glossy Brochure Paper";
2465 "media-type.com.hp.brochure-matte" = "Matte Brochure Paper";
2466 "media-type.com.hp.cover-matte" = "Matte Cover Paper";
2467 "media-type.com.hp.ecosmart-lite" = "Office Recycled Paper";
2468 "media-type.com.hp.everyday-glossy" = "Everyday Glossy Photo Paper";
2469 "media-type.com.hp.everyday-matte" = "Everyday Matte Paper";
2470 "media-type.com.hp.extra-heavy" = "Extra Heavyweight Paper";
2471 "media-type.com.hp.intermediate" = "Multipurpose Paper";
2472 "media-type.com.hp.mid-weight" = "Mid-Weight Paper";
2473 "media-type.com.hp.premium-inkjet" = "Premium Inkjet Paper";
2474 "media-type.com.hp.premium-photo" = "Premium Photo Glossy Paper";
2475 "media-type.com.hp.premium-presentation-matte" = "Premium Presentation Matte Paper";
2476 "media-type.continuous" = "Continuous";
2477 "media-type.continuous-long" = "Continuous Long";
2478 "media-type.continuous-short" = "Continuous Short";
2479 "media-type.corrugated-board" = "Corrugated Board";
2480 "media-type.disc" = "Optical Disc";
2481 "media-type.disc-glossy" = "Glossy Optical Disc";
2482 "media-type.disc-high-gloss" = "High Gloss Optical Disc";
2483 "media-type.disc-matte" = "Matte Optical Disc";
2484 "media-type.disc-satin" = "Satin Optical Disc";
2485 "media-type.disc-semi-gloss" = "Semi-Gloss Optical Disc";
2486 "media-type.double-wall" = "Double Wall";
2487 "media-type.dry-film" = "Dry Film";
2488 "media-type.dvd" = "DVD";
2489 "media-type.embossing-foil" = "Embossing Foil";
2490 "media-type.end-board" = "End Board";
2491 "media-type.envelope" = "Envelope";
2492 "media-type.envelope-archival" = "Archival Envelope";
2493 "media-type.envelope-bond" = "Bond Envelope";
2494 "media-type.envelope-coated" = "Coated Envelope";
2495 "media-type.envelope-cotton" = "Cotton Envelope";
2496 "media-type.envelope-fine" = "Fine Envelope";
2497 "media-type.envelope-heavyweight" = "Heavyweight Envelope";
2498 "media-type.envelope-inkjet" = "Inkjet Envelope";
2499 "media-type.envelope-lightweight" = "Lightweight Envelope";
2500 "media-type.envelope-plain" = "Plain Envelope";
2501 "media-type.envelope-preprinted" = "Preprinted Envelope";
2502 "media-type.envelope-window" = "Windowed Envelope";
2503 "media-type.fabric" = "Fabric";
2504 "media-type.fabric-archival" = "Archival Fabric";
2505 "media-type.fabric-glossy" = "Glossy Fabric";
2506 "media-type.fabric-high-gloss" = "High Gloss Fabric";
2507 "media-type.fabric-matte" = "Matte Fabric";
2508 "media-type.fabric-semi-gloss" = "Semi-Gloss Fabric";
2509 "media-type.fabric-waterproof" = "Waterproof Fabric";
2510 "media-type.film" = "Film";
2511 "media-type.flexo-base" = "Flexo Base";
2512 "media-type.flexo-photo-polymer" = "Flexo Photo Polymer";
2513 "media-type.flute" = "Flute";
2514 "media-type.foil" = "Foil";
2515 "media-type.full-cut-tabs" = "Full Cut Tabs";
2516 "media-type.glass" = "Glass";
2517 "media-type.glass-colored" = "Glass Colored";
2518 "media-type.glass-opaque" = "Glass Opaque";
2519 "media-type.glass-surfaced" = "Glass Surfaced";
2520 "media-type.glass-textured" = "Glass Textured";
2521 "media-type.gravure-cylinder" = "Gravure Cylinder";
2522 "media-type.image-setter-paper" = "Image Setter Paper";
2523 "media-type.imaging-cylinder" = "Imaging Cylinder";
2524 "media-type.jp.co.canon_photo-paper-plus-glossy-ii" = "Photo Paper Plus Glossy II";
2525 "media-type.jp.co.canon_photo-paper-pro-platinum" = "Photo Paper Pro Platinum";
2526 "media-type.jp.co.canon-photo-paper-plus-glossy-ii" = "Photo Paper Plus Glossy II";
2527 "media-type.jp.co.canon-photo-paper-pro-platinum" = "Photo Paper Pro Platinum";
2528 "media-type.labels" = "Labels";
2529 "media-type.labels-colored" = "Colored Labels";
2530 "media-type.labels-glossy" = "Glossy Labels";
2531 "media-type.labels-high-gloss" = "High Gloss Labels";
2532 "media-type.labels-inkjet" = "Inkjet Labels";
2533 "media-type.labels-matte" = "Matte Labels";
2534 "media-type.labels-permanent" = "Permanent Labels";
2535 "media-type.labels-satin" = "Satin Labels";
2536 "media-type.labels-security" = "Security Labels";
2537 "media-type.labels-semi-gloss" = "Semi-Gloss Labels";
2538 "media-type.laminating-foil" = "Laminating Foil";
2539 "media-type.letterhead" = "Letterhead";
2540 "media-type.metal" = "Metal";
2541 "media-type.metal-glossy" = "Metal Glossy";
2542 "media-type.metal-high-gloss" = "Metal High Gloss";
2543 "media-type.metal-matte" = "Metal Matte";
2544 "media-type.metal-satin" = "Metal Satin";
2545 "media-type.metal-semi-gloss" = "Metal Semi Gloss";
2546 "media-type.mounting-tape" = "Mounting Tape";
2547 "media-type.multi-layer" = "Multi Layer";
2548 "media-type.multi-part-form" = "Multi Part Form";
2549 "media-type.other" = "Other";
2550 "media-type.paper" = "Paper";
2551 "media-type.photographic" = "Photo Paper";
2552 "media-type.photographic-archival" = "Photographic Archival";
2553 "media-type.photographic-film" = "Photo Film";
2554 "media-type.photographic-glossy" = "Glossy Photo Paper";
2555 "media-type.photographic-high-gloss" = "High Gloss Photo Paper";
2556 "media-type.photographic-matte" = "Matte Photo Paper";
2557 "media-type.photographic-satin" = "Satin Photo Paper";
2558 "media-type.photographic-semi-gloss" = "Semi-Gloss Photo Paper";
2559 "media-type.plastic" = "Plastic";
2560 "media-type.plastic-archival" = "Plastic Archival";
2561 "media-type.plastic-colored" = "Plastic Colored";
2562 "media-type.plastic-glossy" = "Plastic Glossy";
2563 "media-type.plastic-high-gloss" = "Plastic High Gloss";
2564 "media-type.plastic-matte" = "Plastic Matte";
2565 "media-type.plastic-satin" = "Plastic Satin";
2566 "media-type.plastic-semi-gloss" = "Plastic Semi Gloss";
2567 "media-type.plate" = "Plate";
2568 "media-type.polyester" = "Polyester";
2569 "media-type.pre-cut-tabs" = "Pre Cut Tabs";
2570 "media-type.roll" = "Roll";
2571 "media-type.screen" = "Screen";
2572 "media-type.screen-paged" = "Screen Paged";
2573 "media-type.self-adhesive" = "Self Adhesive";
2574 "media-type.self-adhesive-film" = "Self Adhesive Film";
2575 "media-type.shrink-foil" = "Shrink Foil";
2576 "media-type.single-face" = "Single Face";
2577 "media-type.single-wall" = "Single Wall";
2578 "media-type.sleeve" = "Sleeve";
2579 "media-type.stationery" = "Stationery";
2580 "media-type.stationery-archival" = "Stationery Archival";
2581 "media-type.stationery-coated" = "Coated Paper";
2582 "media-type.stationery-cotton" = "Stationery Cotton";
2583 "media-type.stationery-fine" = "Vellum Paper";
2584 "media-type.stationery-heavyweight" = "Heavyweight Paper";
2585 "media-type.stationery-heavyweight-coated" = "Stationery Heavyweight Coated";
2586 "media-type.stationery-inkjet" = "Stationery Inkjet Paper";
2587 "media-type.stationery-letterhead" = "Letterhead";
2588 "media-type.stationery-lightweight" = "Lightweight Paper";
2589 "media-type.stationery-preprinted" = "Preprinted Paper";
2590 "media-type.stationery-prepunched" = "Punched Paper";
2591 "media-type.tab-stock" = "Tab Stock";
2592 "media-type.tractor" = "Tractor";
2593 "media-type.transfer" = "Transfer";
2594 "media-type.transparency" = "Transparency";
2595 "media-type.triple-wall" = "Triple Wall";
2596 "media-type.wet-film" = "Wet Film";
2597 "media-weight-metric" = "Media Weight (grams per m²)";
2598 "media.asme_f_28x40in" = "28 x 40″";
2599 "media.choice_iso_a4_210x297mm_na_letter_8.5x11in" = "A4 or US Letter";
2600 "media.iso_2a0_1189x1682mm" = "2a0";
2601 "media.iso_a0_841x1189mm" = "A0";
2602 "media.iso_a0x3_1189x2523mm" = "A0x3";
2603 "media.iso_a10_26x37mm" = "A10";
2604 "media.iso_a1_594x841mm" = "A1";
2605 "media.iso_a1x3_841x1783mm" = "A1x3";
2606 "media.iso_a1x4_841x2378mm" = "A1x4";
2607 "media.iso_a2_420x594mm" = "A2";
2608 "media.iso_a2x3_594x1261mm" = "A2x3";
2609 "media.iso_a2x4_594x1682mm" = "A2x4";
2610 "media.iso_a2x5_594x2102mm" = "A2x5";
2611 "media.iso_a3-extra_322x445mm" = "A3 (Extra)";
2612 "media.iso_a3_297x420mm" = "A3";
2613 "media.iso_a3x3_420x891mm" = "A3x3";
2614 "media.iso_a3x4_420x1189mm" = "A3x4";
2615 "media.iso_a3x5_420x1486mm" = "A3x5";
2616 "media.iso_a3x6_420x1783mm" = "A3x6";
2617 "media.iso_a3x7_420x2080mm" = "A3x7";
2618 "media.iso_a4-extra_235.5x322.3mm" = "A4 (Extra)";
2619 "media.iso_a4-tab_225x297mm" = "A4 (Tab)";
2620 "media.iso_a4_210x297mm" = "A4";
2621 "media.iso_a4x3_297x630mm" = "A4x3";
2622 "media.iso_a4x4_297x841mm" = "A4x4";
2623 "media.iso_a4x5_297x1051mm" = "A4x5";
2624 "media.iso_a4x6_297x1261mm" = "A4x6";
2625 "media.iso_a4x7_297x1471mm" = "A4x7";
2626 "media.iso_a4x8_297x1682mm" = "A4x8";
2627 "media.iso_a4x9_297x1892mm" = "A4x9";
2628 "media.iso_a5-extra_174x235mm" = "A5 (Extra)";
2629 "media.iso_a5_148x210mm" = "A5";
2630 "media.iso_a6_105x148mm" = "A6";
2631 "media.iso_a7_74x105mm" = "A7";
2632 "media.iso_a8_52x74mm" = "A8";
2633 "media.iso_a9_37x52mm" = "A9";
2634 "media.iso_b0_1000x1414mm" = "B0";
2635 "media.iso_b10_31x44mm" = "B10";
2636 "media.iso_b1_707x1000mm" = "B1";
2637 "media.iso_b2_500x707mm" = "B2";
2638 "media.iso_b3_353x500mm" = "B3";
2639 "media.iso_b4_250x353mm" = "B4";
2640 "media.iso_b5-extra_201x276mm" = "B5 (Extra)";
2641 "media.iso_b5_176x250mm" = "B5 Envelope";
2642 "media.iso_b6_125x176mm" = "B6";
2643 "media.iso_b6c4_125x324mm" = "B6/C4 Envelope";
2644 "media.iso_b7_88x125mm" = "B7";
2645 "media.iso_b8_62x88mm" = "B8";
2646 "media.iso_b9_44x62mm" = "B9";
2647 "media.iso_c0_917x1297mm" = "C0 Envelope";
2648 "media.iso_c10_28x40mm" = "C10 Envelope";
2649 "media.iso_c1_648x917mm" = "C1 Envelope";
2650 "media.iso_c2_458x648mm" = "C2 Envelope";
2651 "media.iso_c3_324x458mm" = "C3 Envelope";
2652 "media.iso_c4_229x324mm" = "C4 Envelope";
2653 "media.iso_c5_162x229mm" = "C5 Envelope";
2654 "media.iso_c6_114x162mm" = "C6 Envelope";
2655 "media.iso_c6c5_114x229mm" = "C6c5 Envelope";
2656 "media.iso_c7_81x114mm" = "C7 Envelope";
2657 "media.iso_c7c6_81x162mm" = "C7c6 Envelope";
2658 "media.iso_c8_57x81mm" = "C8 Envelope";
2659 "media.iso_c9_40x57mm" = "C9 Envelope";
2660 "media.iso_dl_110x220mm" = "DL Envelope";
2661 "media.iso_ra0_860x1220mm" = "ISO RA0";
2662 "media.iso_ra1_610x860mm" = "ISO RA1";
2663 "media.iso_ra2_430x610mm" = "ISO RA2";
2664 "media.iso_ra3_305x430mm" = "ISO RA3";
2665 "media.iso_ra4_215x305mm" = "ISO RA4";
2666 "media.iso_sra0_900x1280mm" = "ISO SRA0";
2667 "media.iso_sra1_640x900mm" = "ISO SRA1";
2668 "media.iso_sra2_450x640mm" = "ISO SRA2";
2669 "media.iso_sra3_320x450mm" = "ISO SRA3";
2670 "media.iso_sra4_225x320mm" = "ISO SRA4";
2671 "media.jis_b0_1030x1456mm" = "JIS B0";
2672 "media.jis_b10_32x45mm" = "JIS B10";
2673 "media.jis_b1_728x1030mm" = "JIS B1";
2674 "media.jis_b2_515x728mm" = "JIS B2";
2675 "media.jis_b3_364x515mm" = "JIS B3";
2676 "media.jis_b4_257x364mm" = "JIS B4";
2677 "media.jis_b5_182x257mm" = "JIS B5";
2678 "media.jis_b6_128x182mm" = "JIS B6";
2679 "media.jis_b7_91x128mm" = "JIS B7";
2680 "media.jis_b8_64x91mm" = "JIS B8";
2681 "media.jis_b9_45x64mm" = "JIS B9";
2682 "media.jis_exec_216x330mm" = "JIS Executive";
2683 "media.jpn_chou2_111.1x146mm" = "Chou 2 Envelope";
2684 "media.jpn_chou3_120x235mm" = "Chou 3 Envelope";
2685 "media.jpn_chou4_90x205mm" = "Chou 4 Envelope";
2686 "media.jpn_hagaki_100x148mm" = "Hagaki";
2687 "media.jpn_kahu_240x322.1mm" = "Kahu Envelope";
2688 "media.jpn_kaku2_240x332mm" = "Kahu 2 Envelope";
2689 "media.jpn_kaku3_216x277mm" = "216 x 277mm";
2690 "media.jpn_kaku4_197x267mm" = "197 x 267mm";
2691 "media.jpn_kaku5_190x240mm" = "190 x 240mm";
2692 "media.jpn_kaku7_142x205mm" = "142 x 205mm";
2693 "media.jpn_kaku8_119x197mm" = "119 x 197mm";
2694 "media.jpn_oufuku_148x200mm" = "Oufuku Reply Postcard";
2695 "media.jpn_you4_105x235mm" = "You 4 Envelope";
2696 "media.na_10x11_10x11in" = "10 x 11″";
2697 "media.na_10x13_10x13in" = "10 x 13″";
2698 "media.na_10x14_10x14in" = "10 x 14″";
2699 "media.na_10x15_10x15in" = "10 x 15″";
2700 "media.na_11x12_11x12in" = "11 x 12″";
2701 "media.na_11x15_11x15in" = "11 x 15″";
2702 "media.na_12x19_12x19in" = "12 x 19″";
2703 "media.na_5x7_5x7in" = "5 x 7″";
2704 "media.na_6x9_6x9in" = "6 x 9″";
2705 "media.na_7x9_7x9in" = "7 x 9″";
2706 "media.na_9x11_9x11in" = "9 x 11″";
2707 "media.na_a2_4.375x5.75in" = "A2 Envelope";
2708 "media.na_arch-a_9x12in" = "9 x 12″";
2709 "media.na_arch-b_12x18in" = "12 x 18″";
2710 "media.na_arch-c_18x24in" = "18 x 24″";
2711 "media.na_arch-d_24x36in" = "24 x 36″";
2712 "media.na_arch-e2_26x38in" = "26 x 38″";
2713 "media.na_arch-e3_27x39in" = "27 x 39″";
2714 "media.na_arch-e_36x48in" = "36 x 48″";
2715 "media.na_b-plus_12x19.17in" = "12 x 19.17″";
2716 "media.na_c5_6.5x9.5in" = "C5 Envelope";
2717 "media.na_c_17x22in" = "17 x 22″";
2718 "media.na_d_22x34in" = "22 x 34″";
2719 "media.na_e_34x44in" = "34 x 44″";
2720 "media.na_edp_11x14in" = "11 x 14″";
2721 "media.na_eur-edp_12x14in" = "12 x 14″";
2722 "media.na_executive_7.25x10.5in" = "Executive";
2723 "media.na_f_44x68in" = "44 x 68″";
2724 "media.na_fanfold-eur_8.5x12in" = "European Fanfold";
2725 "media.na_fanfold-us_11x14.875in" = "US Fanfold";
2726 "media.na_foolscap_8.5x13in" = "Foolscap";
2727 "media.na_govt-legal_8x13in" = "8 x 13″";
2728 "media.na_govt-letter_8x10in" = "8 x 10″";
2729 "media.na_index-3x5_3x5in" = "3 x 5″";
2730 "media.na_index-4x6-ext_6x8in" = "6 x 8″";
2731 "media.na_index-4x6_4x6in" = "4 x 6″";
2732 "media.na_index-5x8_5x8in" = "5 x 8″";
2733 "media.na_invoice_5.5x8.5in" = "Statement";
2734 "media.na_ledger_11x17in" = "11 x 17″";
2735 "media.na_legal-extra_9.5x15in" = "US Legal (Extra)";
2736 "media.na_legal_8.5x14in" = "US Legal";
2737 "media.na_letter-extra_9.5x12in" = "US Letter (Extra)";
2738 "media.na_letter-plus_8.5x12.69in" = "US Letter (Plus)";
2739 "media.na_letter_8.5x11in" = "US Letter";
2740 "media.na_monarch_3.875x7.5in" = "Monarch Envelope";
2741 "media.na_number-10_4.125x9.5in" = "#10 Envelope";
2742 "media.na_number-11_4.5x10.375in" = "#11 Envelope";
2743 "media.na_number-12_4.75x11in" = "#12 Envelope";
2744 "media.na_number-14_5x11.5in" = "#14 Envelope";
2745 "media.na_number-9_3.875x8.875in" = "#9 Envelope";
2746 "media.na_oficio_8.5x13.4in" = "8.5 x 13.4″";
2747 "media.na_personal_3.625x6.5in" = "Personal Envelope";
2748 "media.na_quarto_8.5x10.83in" = "Quarto";
2749 "media.na_super-a_8.94x14in" = "8.94 x 14″";
2750 "media.na_super-b_13x19in" = "13 x 19″";
2751 "media.na_wide-format_30x42in" = "30 x 42″";
2752 "media.oe_12x16_12x16in" = "12 x 16″";
2753 "media.oe_14x17_14x17in" = "14 x 17″";
2754 "media.oe_18x22_18x22in" = "18 x 22″";
2755 "media.oe_a2plus_17x24in" = "17 x 24″";
2756 "media.oe_photo-10r_10x12in" = "10 x 12″";
2757 "media.oe_photo-20r_20x24in" = "20 x 24″";
2758 "media.oe_photo-l_3.5x5in" = "3.5 x 5″";
2759 "media.oe_photo-s10r_10x15in" = "10 x 15″";
2760 "media.om_16k_184x260mm" = "184 x 260mm";
2761 "media.om_16k_195x270mm" = "195 x 270mm";
2762 "media.om_dai-pa-kai_275x395mm" = "275 x 395mm";
2763 "media.om_folio-sp_215x315mm" = "Folio";
2764 "media.om_folio_210x330mm" = "Folio (Special)";
2765 "media.om_invite_220x220mm" = "Invitation Envelope";
2766 "media.om_italian_110x230mm" = "Italian Envelope";
2767 "media.om_juuro-ku-kai_198x275mm" = "198 x 275mm";
2768 "media.om_large-photo_200x300" = "200 x 300";
2769 "media.om_medium-photo_130x180mm" = "130 x 180mm";
2770 "media.om_pa-kai_267x389mm" = "267 x 389mm";
2771 "media.om_postfix_114x229mm" = "Postfix Envelope";
2772 "media.om_small-photo_100x150mm" = "100 x 150mm";
2773 "media.om_wide-photo_100x200mm" = "100 x 200mm";
2774 "media.prc_10_324x458mm" = "Chinese #10 Envelope";
2775 "media.prc_16k_146x215mm" = "Chinese 16k";
2776 "media.prc_1_102x165mm" = "Chinese #1 Envelope";
2777 "media.prc_2_102x176mm" = "Chinese #2 Envelope";
2778 "media.prc_32k_97x151mm" = "Chinese 32k";
2779 "media.prc_3_125x176mm" = "Chinese #3 Envelope";
2780 "media.prc_4_110x208mm" = "Chinese #4 Envelope";
2781 "media.prc_5_110x220mm" = "Chinese #5 Envelope";
2782 "media.prc_6_120x320mm" = "Chinese #6 Envelope";
2783 "media.prc_7_160x230mm" = "Chinese #7 Envelope";
2784 "media.prc_8_120x309mm" = "Chinese #8 Envelope";
2785 "media.roc_16k_7.75x10.75in" = "ROC 16k";
2786 "media.roc_8k_10.75x15.5in" = "ROC 8k";
2787 "multiple-document-handling" = "Multiple Document Handling";
2788 "multiple-document-handling.separate-documents-collated-copies" = "Separate Documents Collated Copies";
2789 "multiple-document-handling.separate-documents-uncollated-copies" = "Separate Documents Uncollated Copies";
2790 "multiple-document-handling.single-document" = "Single Document";
2791 "multiple-document-handling.single-document-new-sheet" = "Single Document New Sheet";
2792 "multiple-object-handling" = "Multiple Object Handling";
2793 "multiple-object-handling.auto" = "Automatic";
2794 "multiple-object-handling.best-fit" = "Best Fit";
2795 "multiple-object-handling.best-quality" = "Best Quality";
2796 "multiple-object-handling.best-speed" = "Best Speed";
2797 "multiple-object-handling.one-at-a-time" = "One At A Time";
2798 "multiple-operation-time-out-action" = "On Timeout";
2799 "multiple-operation-time-out-action.abort-job" = "Abort Job";
2800 "multiple-operation-time-out-action.hold-job" = "Hold Job";
2801 "multiple-operation-time-out-action.process-job" = "Process Job";
2802 "noise-removal" = "Noise Removal";
2803 "notify-attributes" = "Notify Attributes";
2804 "notify-charset" = "Notify Charset";
2805 "notify-events" = "Notify Events";
2806 "notify-events.document-completed" = "Document Completed";
2807 "notify-events.document-config-changed" = "Document Config Changed";
2808 "notify-events.document-created" = "Document Created";
2809 "notify-events.document-fetchable" = "Document Fetchable";
2810 "notify-events.document-state-changed" = "Document State Changed";
2811 "notify-events.document-stopped" = "Document Stopped";
2812 "notify-events.job-completed" = "Job Completed";
2813 "notify-events.job-config-changed" = "Job Config Changed";
2814 "notify-events.job-created" = "Job Created";
2815 "notify-events.job-fetchable" = "Job Fetchable";
2816 "notify-events.job-progress" = "Job Progress";
2817 "notify-events.job-state-changed" = "Job State Changed";
2818 "notify-events.job-stopped" = "Job Stopped";
2819 "notify-events.none" = "None";
2820 "notify-events.printer-config-changed" = "Printer Config Changed";
2821 "notify-events.printer-finishings-changed" = "Printer Finishings Changed";
2822 "notify-events.printer-media-changed" = "Printer Media Changed";
2823 "notify-events.printer-queue-order-changed" = "Printer Queue Order Changed";
2824 "notify-events.printer-restarted" = "Printer Restarted";
2825 "notify-events.printer-shutdown" = "Printer Shutdown";
2826 "notify-events.printer-state-changed" = "Printer State Changed";
2827 "notify-events.printer-stopped" = "Printer Stopped";
2828 "notify-get-interval" = "Notify Get Interval";
2829 "notify-lease-duration" = "Notify Lease Duration";
2830 "notify-natural-language" = "Notify Natural Language";
2831 "notify-pull-method" = "Notify Pull Method";
2832 "notify-recipient-uri" = "Notify Recipient";
2833 "notify-sequence-numbers" = "Notify Sequence Numbers";
2834 "notify-subscription-ids" = "Notify Subscription Ids";
2835 "notify-time-interval" = "Notify Time Interval";
2836 "notify-user-data" = "Notify User Data";
2837 "notify-wait" = "Notify Wait";
2838 "number-of-retries" = "Number Of Retries";
2839 "number-up" = "Number-Up";
2840 "object-offset" = "Object Offset";
2841 "object-size" = "Object Size";
2842 "organization-name" = "Organization Name";
2843 "orientation-requested" = "Orientation";
2844 "orientation-requested.3" = "Portrait";
2845 "orientation-requested.4" = "Landscape";
2846 "orientation-requested.5" = "Reverse Landscape";
2847 "orientation-requested.6" = "Reverse Portrait";
2848 "orientation-requested.7" = "None";
2849 "output-attributes" = "Scanned Image Options";
2850 "output-bin" = "Output Tray";
2851 "output-bin.auto" = "Automatic";
2852 "output-bin.bottom" = "Bottom";
2853 "output-bin.center" = "Center";
2854 "output-bin.face-down" = "Face Down";
2855 "output-bin.face-up" = "Face Up";
2856 "output-bin.large-capacity" = "Large Capacity";
2857 "output-bin.left" = "Left";
2858 "output-bin.mailbox-1" = "Mailbox 1";
2859 "output-bin.mailbox-10" = "Mailbox 10";
2860 "output-bin.mailbox-2" = "Mailbox 2";
2861 "output-bin.mailbox-3" = "Mailbox 3";
2862 "output-bin.mailbox-4" = "Mailbox 4";
2863 "output-bin.mailbox-5" = "Mailbox 5";
2864 "output-bin.mailbox-6" = "Mailbox 6";
2865 "output-bin.mailbox-7" = "Mailbox 7";
2866 "output-bin.mailbox-8" = "Mailbox 8";
2867 "output-bin.mailbox-9" = "Mailbox 9";
2868 "output-bin.middle" = "Middle";
2869 "output-bin.my-mailbox" = "My Mailbox";
2870 "output-bin.rear" = "Rear";
2871 "output-bin.right" = "Right";
2872 "output-bin.side" = "Side";
2873 "output-bin.stacker-1" = "Stacker 1";
2874 "output-bin.stacker-10" = "Stacker 10";
2875 "output-bin.stacker-2" = "Stacker 2";
2876 "output-bin.stacker-3" = "Stacker 3";
2877 "output-bin.stacker-4" = "Stacker 4";
2878 "output-bin.stacker-5" = "Stacker 5";
2879 "output-bin.stacker-6" = "Stacker 6";
2880 "output-bin.stacker-7" = "Stacker 7";
2881 "output-bin.stacker-8" = "Stacker 8";
2882 "output-bin.stacker-9" = "Stacker 9";
2883 "output-bin.top" = "Top";
2884 "output-bin.tray-1" = "Tray 1";
2885 "output-bin.tray-10" = "Tray 10";
2886 "output-bin.tray-2" = "Tray 2";
2887 "output-bin.tray-3" = "Tray 3";
2888 "output-bin.tray-4" = "Tray 4";
2889 "output-bin.tray-5" = "Tray 5";
2890 "output-bin.tray-6" = "Tray 6";
2891 "output-bin.tray-7" = "Tray 7";
2892 "output-bin.tray-8" = "Tray 8";
2893 "output-bin.tray-9" = "Tray 9";
2894 "output-compression-quality-factor" = "Scanned Image Quality";
2895 "page-delivery" = "Page Delivery";
2896 "page-delivery.reverse-order-face-down" = "Reverse Order Face-down";
2897 "page-delivery.reverse-order-face-up" = "Reverse Order Face-up";
2898 "page-delivery.same-order-face-down" = "Same Order Face-down";
2899 "page-delivery.same-order-face-up" = "Same Order Face-up";
2900 "page-delivery.system-specified" = "System Specified";
2901 "page-order-received" = "Page Order Received";
2902 "page-order-received.1-to-n-order" = "1 To N";
2903 "page-order-received.n-to-1-order" = "N To 1";
2904 "page-ranges" = "Page Ranges";
2906 "pages-per-subset" = "Pages Per Subset";
2907 "platform-shape" = "Platform Shape";
2908 "platform-shape.ellipse" = "Round";
2909 "platform-shape.rectangle" = "Rectangle";
2910 "platform-temperature" = "Platform Temperature";
2911 "post-dial-string" = "Post-dial String";
2912 "pre-dial-string" = "Pre-dial String";
2913 "presentation-direction-number-up" = "Number-Up Layout";
2914 "presentation-direction-number-up.tobottom-toleft" = "Top-bottom, Right-left";
2915 "presentation-direction-number-up.tobottom-toright" = "Top-bottom, Left-right";
2916 "presentation-direction-number-up.toleft-tobottom" = "Right-left, Top-bottom";
2917 "presentation-direction-number-up.toleft-totop" = "Right-left, Bottom-top";
2918 "presentation-direction-number-up.toright-tobottom" = "Left-right, Top-bottom";
2919 "presentation-direction-number-up.toright-totop" = "Left-right, Bottom-top";
2920 "presentation-direction-number-up.totop-toleft" = "Bottom-top, Right-left";
2921 "presentation-direction-number-up.totop-toright" = "Bottom-top, Left-right";
2922 "print-accuracy" = "Print Accuracy";
2923 "print-base" = "Print Base";
2924 "print-base.brim" = "Brim";
2925 "print-base.none" = "None";
2926 "print-base.raft" = "Raft";
2927 "print-base.skirt" = "Skirt";
2928 "print-base.standard" = "Standard";
2929 "print-color-mode" = "Print Color Mode";
2930 "print-color-mode.auto" = "Automatic";
2931 "print-color-mode.bi-level" = "Text";
2932 "print-color-mode.color" = "Color";
2933 "print-color-mode.highlight" = "Highlight";
2934 "print-color-mode.monochrome" = "Monochrome";
2935 "print-color-mode.process-bi-level" = "Process Text";
2936 "print-color-mode.process-monochrome" = "Process Monochrome";
2937 "print-content-optimize" = "Print Optimization";
2938 "print-content-optimize.auto" = "Automatic";
2939 "print-content-optimize.graphic" = "Graphics";
2940 "print-content-optimize.photo" = "Photo";
2941 "print-content-optimize.text" = "Text";
2942 "print-content-optimize.text-and-graphic" = "Text and Graphics";
2943 "print-objects" = "Print Objects";
2944 "print-quality" = "Print Quality";
2945 "print-quality.3" = "Draft";
2946 "print-quality.4" = "Normal";
2947 "print-quality.5" = "High";
2948 "print-rendering-intent" = "Print Rendering Intent";
2949 "print-rendering-intent.absolute" = "Absolute";
2950 "print-rendering-intent.auto" = "Automatic";
2951 "print-rendering-intent.perceptual" = "Perceptual";
2952 "print-rendering-intent.relative" = "Relative";
2953 "print-rendering-intent.relative-bpc" = "Relative w/Black Point Compensation";
2954 "print-rendering-intent.saturation" = "Saturation";
2955 "print-scaling" = "Print Scaling";
2956 "print-scaling.auto" = "Automatic";
2957 "print-scaling.auto-fit" = "Auto-fit";
2958 "print-scaling.fill" = "Fill";
2959 "print-scaling.fit" = "Fit";
2960 "print-scaling.none" = "None";
2961 "print-supports" = "Print Supports";
2962 "print-supports.material" = "With Specified Material";
2963 "print-supports.none" = "None";
2964 "print-supports.standard" = "Standard";
2965 "printer-message-from-operator" = "Message From Operator";
2966 "printer-resolution" = "Print Resolution";
2967 "printer-state" = "Printer State";
2968 "printer-state-reasons" = "Detailed Printer State";
2969 "printer-state-reasons.alert-removal-of-binary-change-entry" = "Old Alerts Have Been Removed";
2970 "printer-state-reasons.bander-added" = "Bander Added";
2971 "printer-state-reasons.bander-almost-empty" = "Bander Almost Empty";
2972 "printer-state-reasons.bander-almost-full" = "Bander Almost Full";
2973 "printer-state-reasons.bander-at-limit" = "Bander At Limit";
2974 "printer-state-reasons.bander-closed" = "Bander Closed";
2975 "printer-state-reasons.bander-configuration-change" = "Bander Configuration Change";
2976 "printer-state-reasons.bander-cover-closed" = "Bander Cover Closed";
2977 "printer-state-reasons.bander-cover-open" = "Bander Cover Open";
2978 "printer-state-reasons.bander-empty" = "Bander Empty";
2979 "printer-state-reasons.bander-full" = "Bander Full";
2980 "printer-state-reasons.bander-interlock-closed" = "Bander Interlock Closed";
2981 "printer-state-reasons.bander-interlock-open" = "Bander Interlock Open";
2982 "printer-state-reasons.bander-jam" = "Bander Jam";
2983 "printer-state-reasons.bander-life-almost-over" = "Bander Life Almost Over";
2984 "printer-state-reasons.bander-life-over" = "Bander Life Over";
2985 "printer-state-reasons.bander-memory-exhausted" = "Bander Memory Exhausted";
2986 "printer-state-reasons.bander-missing" = "Bander Missing";
2987 "printer-state-reasons.bander-motor-failure" = "Bander Motor Failure";
2988 "printer-state-reasons.bander-near-limit" = "Bander Near Limit";
2989 "printer-state-reasons.bander-offline" = "Bander Offline";
2990 "printer-state-reasons.bander-opened" = "Bander Opened";
2991 "printer-state-reasons.bander-over-temperature" = "Bander Over Temperature";
2992 "printer-state-reasons.bander-power-saver" = "Bander Power Saver";
2993 "printer-state-reasons.bander-recoverable-failure" = "Bander Recoverable Failure";
2994 "printer-state-reasons.bander-recoverable-storage" = "Bander Recoverable Storage";
2995 "printer-state-reasons.bander-removed" = "Bander Removed";
2996 "printer-state-reasons.bander-resource-added" = "Bander Resource Added";
2997 "printer-state-reasons.bander-resource-removed" = "Bander Resource Removed";
2998 "printer-state-reasons.bander-thermistor-failure" = "Bander Thermistor Failure";
2999 "printer-state-reasons.bander-timing-failure" = "Bander Timing Failure";
3000 "printer-state-reasons.bander-turned-off" = "Bander Turned Off";
3001 "printer-state-reasons.bander-turned-on" = "Bander Turned On";
3002 "printer-state-reasons.bander-under-temperature" = "Bander Under Temperature";
3003 "printer-state-reasons.bander-unrecoverable-failure" = "Bander Unrecoverable Failure";
3004 "printer-state-reasons.bander-unrecoverable-storage-error" = "Bander Unrecoverable Storage Error";
3005 "printer-state-reasons.bander-warming-up" = "Bander Warming Up";
3006 "printer-state-reasons.binder-added" = "Binder Added";
3007 "printer-state-reasons.binder-almost-empty" = "Binder Almost Empty";
3008 "printer-state-reasons.binder-almost-full" = "Binder Almost Full";
3009 "printer-state-reasons.binder-at-limit" = "Binder At Limit";
3010 "printer-state-reasons.binder-closed" = "Binder Closed";
3011 "printer-state-reasons.binder-configuration-change" = "Binder Configuration Change";
3012 "printer-state-reasons.binder-cover-closed" = "Binder Cover Closed";
3013 "printer-state-reasons.binder-cover-open" = "Binder Cover Open";
3014 "printer-state-reasons.binder-empty" = "Binder Empty";
3015 "printer-state-reasons.binder-full" = "Binder Full";
3016 "printer-state-reasons.binder-interlock-closed" = "Binder Interlock Closed";
3017 "printer-state-reasons.binder-interlock-open" = "Binder Interlock Open";
3018 "printer-state-reasons.binder-jam" = "Binder Jam";
3019 "printer-state-reasons.binder-life-almost-over" = "Binder Life Almost Over";
3020 "printer-state-reasons.binder-life-over" = "Binder Life Over";
3021 "printer-state-reasons.binder-memory-exhausted" = "Binder Memory Exhausted";
3022 "printer-state-reasons.binder-missing" = "Binder Missing";
3023 "printer-state-reasons.binder-motor-failure" = "Binder Motor Failure";
3024 "printer-state-reasons.binder-near-limit" = "Binder Near Limit";
3025 "printer-state-reasons.binder-offline" = "Binder Offline";
3026 "printer-state-reasons.binder-opened" = "Binder Opened";
3027 "printer-state-reasons.binder-over-temperature" = "Binder Over Temperature";
3028 "printer-state-reasons.binder-power-saver" = "Binder Power Saver";
3029 "printer-state-reasons.binder-recoverable-failure" = "Binder Recoverable Failure";
3030 "printer-state-reasons.binder-recoverable-storage" = "Binder Recoverable Storage";
3031 "printer-state-reasons.binder-removed" = "Binder Removed";
3032 "printer-state-reasons.binder-resource-added" = "Binder Resource Added";
3033 "printer-state-reasons.binder-resource-removed" = "Binder Resource Removed";
3034 "printer-state-reasons.binder-thermistor-failure" = "Binder Thermistor Failure";
3035 "printer-state-reasons.binder-timing-failure" = "Binder Timing Failure";
3036 "printer-state-reasons.binder-turned-off" = "Binder Turned Off";
3037 "printer-state-reasons.binder-turned-on" = "Binder Turned On";
3038 "printer-state-reasons.binder-under-temperature" = "Binder Under Temperature";
3039 "printer-state-reasons.binder-unrecoverable-failure" = "Binder Unrecoverable Failure";
3040 "printer-state-reasons.binder-unrecoverable-storage-error" = "Binder Unrecoverable Storage Error";
3041 "printer-state-reasons.binder-warming-up" = "Binder Warming Up";
3042 "printer-state-reasons.camera-failure" = "Camera Failure";
3043 "printer-state-reasons.chamber-cooling" = "Chamber Cooling";
3044 "printer-state-reasons.chamber-heating" = "Chamber Heating";
3045 "printer-state-reasons.chamber-temperature-high" = "Chamber Temperature High";
3046 "printer-state-reasons.chamber-temperature-low" = "Chamber Temperature Low";
3047 "printer-state-reasons.cleaner-life-almost-over" = "Cleaner Life Almost Over";
3048 "printer-state-reasons.cleaner-life-over" = "Cleaner Life Over";
3049 "printer-state-reasons.configuration-change" = "Configuration Change";
3050 "printer-state-reasons.connecting-to-device" = "Connecting To Device";
3051 "printer-state-reasons.cover-open" = "Cover Open";
3052 "printer-state-reasons.deactivated" = "Deactivated";
3053 "printer-state-reasons.developer-empty" = "Developer Empty";
3054 "printer-state-reasons.developer-low" = "Developer Low";
3055 "printer-state-reasons.die-cutter-added" = "Die Cutter Added";
3056 "printer-state-reasons.die-cutter-almost-empty" = "Die Cutter Almost Empty";
3057 "printer-state-reasons.die-cutter-almost-full" = "Die Cutter Almost Full";
3058 "printer-state-reasons.die-cutter-at-limit" = "Die Cutter At Limit";
3059 "printer-state-reasons.die-cutter-closed" = "Die Cutter Closed";
3060 "printer-state-reasons.die-cutter-configuration-change" = "Die Cutter Configuration Change";
3061 "printer-state-reasons.die-cutter-cover-closed" = "Die Cutter Cover Closed";
3062 "printer-state-reasons.die-cutter-cover-open" = "Die Cutter Cover Open";
3063 "printer-state-reasons.die-cutter-empty" = "Die Cutter Empty";
3064 "printer-state-reasons.die-cutter-full" = "Die Cutter Full";
3065 "printer-state-reasons.die-cutter-interlock-closed" = "Die Cutter Interlock Closed";
3066 "printer-state-reasons.die-cutter-interlock-open" = "Die Cutter Interlock Open";
3067 "printer-state-reasons.die-cutter-jam" = "Die Cutter Jam";
3068 "printer-state-reasons.die-cutter-life-almost-over" = "Die Cutter Life Almost Over";
3069 "printer-state-reasons.die-cutter-life-over" = "Die Cutter Life Over";
3070 "printer-state-reasons.die-cutter-memory-exhausted" = "Die Cutter Memory Exhausted";
3071 "printer-state-reasons.die-cutter-missing" = "Die Cutter Missing";
3072 "printer-state-reasons.die-cutter-motor-failure" = "Die Cutter Motor Failure";
3073 "printer-state-reasons.die-cutter-near-limit" = "Die Cutter Near Limit";
3074 "printer-state-reasons.die-cutter-offline" = "Die Cutter Offline";
3075 "printer-state-reasons.die-cutter-opened" = "Die Cutter Opened";
3076 "printer-state-reasons.die-cutter-over-temperature" = "Die Cutter Over Temperature";
3077 "printer-state-reasons.die-cutter-power-saver" = "Die Cutter Power Saver";
3078 "printer-state-reasons.die-cutter-recoverable-failure" = "Die Cutter Recoverable Failure";
3079 "printer-state-reasons.die-cutter-recoverable-storage" = "Die Cutter Recoverable Storage";
3080 "printer-state-reasons.die-cutter-removed" = "Die Cutter Removed";
3081 "printer-state-reasons.die-cutter-resource-added" = "Die Cutter Resource Added";
3082 "printer-state-reasons.die-cutter-resource-removed" = "Die Cutter Resource Removed";
3083 "printer-state-reasons.die-cutter-thermistor-failure" = "Die Cutter Thermistor Failure";
3084 "printer-state-reasons.die-cutter-timing-failure" = "Die Cutter Timing Failure";
3085 "printer-state-reasons.die-cutter-turned-off" = "Die Cutter Turned Off";
3086 "printer-state-reasons.die-cutter-turned-on" = "Die Cutter Turned On";
3087 "printer-state-reasons.die-cutter-under-temperature" = "Die Cutter Under Temperature";
3088 "printer-state-reasons.die-cutter-unrecoverable-failure" = "Die Cutter Unrecoverable Failure";
3089 "printer-state-reasons.die-cutter-unrecoverable-storage-error" = "Die Cutter Unrecoverable Storage Error";
3090 "printer-state-reasons.die-cutter-warming-up" = "Die Cutter Warming Up";
3091 "printer-state-reasons.door-open" = "Door Open";
3092 "printer-state-reasons.extruder-cooling" = "Extruder Cooling";
3093 "printer-state-reasons.extruder-failure" = "Extruder Failure";
3094 "printer-state-reasons.extruder-heating" = "Extruder Heating";
3095 "printer-state-reasons.extruder-jam" = "Extruder Jam";
3096 "printer-state-reasons.extruder-temperature-high" = "Extruder Temperature High";
3097 "printer-state-reasons.extruder-temperature-low" = "Extruder Temperature Low";
3098 "printer-state-reasons.fan-failure" = "Fan Failure";
3099 "printer-state-reasons.folder-added" = "Folder Added";
3100 "printer-state-reasons.folder-almost-empty" = "Folder Almost Empty";
3101 "printer-state-reasons.folder-almost-full" = "Folder Almost Full";
3102 "printer-state-reasons.folder-at-limit" = "Folder At Limit";
3103 "printer-state-reasons.folder-closed" = "Folder Closed";
3104 "printer-state-reasons.folder-configuration-change" = "Folder Configuration Change";
3105 "printer-state-reasons.folder-cover-closed" = "Folder Cover Closed";
3106 "printer-state-reasons.folder-cover-open" = "Folder Cover Open";
3107 "printer-state-reasons.folder-empty" = "Folder Empty";
3108 "printer-state-reasons.folder-full" = "Folder Full";
3109 "printer-state-reasons.folder-interlock-closed" = "Folder Interlock Closed";
3110 "printer-state-reasons.folder-interlock-open" = "Folder Interlock Open";
3111 "printer-state-reasons.folder-jam" = "Folder Jam";
3112 "printer-state-reasons.folder-life-almost-over" = "Folder Life Almost Over";
3113 "printer-state-reasons.folder-life-over" = "Folder Life Over";
3114 "printer-state-reasons.folder-memory-exhausted" = "Folder Memory Exhausted";
3115 "printer-state-reasons.folder-missing" = "Folder Missing";
3116 "printer-state-reasons.folder-motor-failure" = "Folder Motor Failure";
3117 "printer-state-reasons.folder-near-limit" = "Folder Near Limit";
3118 "printer-state-reasons.folder-offline" = "Folder Offline";
3119 "printer-state-reasons.folder-opened" = "Folder Opened";
3120 "printer-state-reasons.folder-over-temperature" = "Folder Over Temperature";
3121 "printer-state-reasons.folder-power-saver" = "Folder Power Saver";
3122 "printer-state-reasons.folder-recoverable-failure" = "Folder Recoverable Failure";
3123 "printer-state-reasons.folder-recoverable-storage" = "Folder Recoverable Storage";
3124 "printer-state-reasons.folder-removed" = "Folder Removed";
3125 "printer-state-reasons.folder-resource-added" = "Folder Resource Added";
3126 "printer-state-reasons.folder-resource-removed" = "Folder Resource Removed";
3127 "printer-state-reasons.folder-thermistor-failure" = "Folder Thermistor Failure";
3128 "printer-state-reasons.folder-timing-failure" = "Folder Timing Failure";
3129 "printer-state-reasons.folder-turned-off" = "Folder Turned Off";
3130 "printer-state-reasons.folder-turned-on" = "Folder Turned On";
3131 "printer-state-reasons.folder-under-temperature" = "Folder Under Temperature";
3132 "printer-state-reasons.folder-unrecoverable-failure" = "Folder Unrecoverable Failure";
3133 "printer-state-reasons.folder-unrecoverable-storage-error" = "Folder Unrecoverable Storage Error";
3134 "printer-state-reasons.folder-warming-up" = "Folder Warming Up";
3135 "printer-state-reasons.fuser-over-temp" = "Fuser Over Temp";
3136 "printer-state-reasons.fuser-under-temp" = "Fuser Under Temp";
3137 "printer-state-reasons.hold-new-jobs" = "Hold New Jobs";
3138 "printer-state-reasons.identify-printer-requested" = "Identify Printer";
3139 "printer-state-reasons.imprinter-added" = "Imprinter Added";
3140 "printer-state-reasons.imprinter-almost-empty" = "Imprinter Almost Empty";
3141 "printer-state-reasons.imprinter-almost-full" = "Imprinter Almost Full";
3142 "printer-state-reasons.imprinter-at-limit" = "Imprinter At Limit";
3143 "printer-state-reasons.imprinter-closed" = "Imprinter Closed";
3144 "printer-state-reasons.imprinter-configuration-change" = "Imprinter Configuration Change";
3145 "printer-state-reasons.imprinter-cover-closed" = "Imprinter Cover Closed";
3146 "printer-state-reasons.imprinter-cover-open" = "Imprinter Cover Open";
3147 "printer-state-reasons.imprinter-empty" = "Imprinter Empty";
3148 "printer-state-reasons.imprinter-full" = "Imprinter Full";
3149 "printer-state-reasons.imprinter-interlock-closed" = "Imprinter Interlock Closed";
3150 "printer-state-reasons.imprinter-interlock-open" = "Imprinter Interlock Open";
3151 "printer-state-reasons.imprinter-jam" = "Imprinter Jam";
3152 "printer-state-reasons.imprinter-life-almost-over" = "Imprinter Life Almost Over";
3153 "printer-state-reasons.imprinter-life-over" = "Imprinter Life Over";
3154 "printer-state-reasons.imprinter-memory-exhausted" = "Imprinter Memory Exhausted";
3155 "printer-state-reasons.imprinter-missing" = "Imprinter Missing";
3156 "printer-state-reasons.imprinter-motor-failure" = "Imprinter Motor Failure";
3157 "printer-state-reasons.imprinter-near-limit" = "Imprinter Near Limit";
3158 "printer-state-reasons.imprinter-offline" = "Imprinter Offline";
3159 "printer-state-reasons.imprinter-opened" = "Imprinter Opened";
3160 "printer-state-reasons.imprinter-over-temperature" = "Imprinter Over Temperature";
3161 "printer-state-reasons.imprinter-power-saver" = "Imprinter Power Saver";
3162 "printer-state-reasons.imprinter-recoverable-failure" = "Imprinter Recoverable Failure";
3163 "printer-state-reasons.imprinter-recoverable-storage" = "Imprinter Recoverable Storage";
3164 "printer-state-reasons.imprinter-removed" = "Imprinter Removed";
3165 "printer-state-reasons.imprinter-resource-added" = "Imprinter Resource Added";
3166 "printer-state-reasons.imprinter-resource-removed" = "Imprinter Resource Removed";
3167 "printer-state-reasons.imprinter-thermistor-failure" = "Imprinter Thermistor Failure";
3168 "printer-state-reasons.imprinter-timing-failure" = "Imprinter Timing Failure";
3169 "printer-state-reasons.imprinter-turned-off" = "Imprinter Turned Off";
3170 "printer-state-reasons.imprinter-turned-on" = "Imprinter Turned On";
3171 "printer-state-reasons.imprinter-under-temperature" = "Imprinter Under Temperature";
3172 "printer-state-reasons.imprinter-unrecoverable-failure" = "Imprinter Unrecoverable Failure";
3173 "printer-state-reasons.imprinter-unrecoverable-storage-error" = "Imprinter Unrecoverable Storage Error";
3174 "printer-state-reasons.imprinter-warming-up" = "Imprinter Warming Up";
3175 "printer-state-reasons.input-cannot-feed-size-selected" = "Input Cannot Feed Size Selected";
3176 "printer-state-reasons.input-manual-input-request" = "Input Manual Input Request";
3177 "printer-state-reasons.input-media-color-change" = "Input Media Color Change";
3178 "printer-state-reasons.input-media-form-parts-change" = "Input Media Form Parts Change";
3179 "printer-state-reasons.input-media-size-change" = "Input Media Size Change";
3180 "printer-state-reasons.input-media-type-change" = "Input Media Type Change";
3181 "printer-state-reasons.input-media-weight-change" = "Input Media Weight Change";
3182 "printer-state-reasons.input-tray-elevation-failure" = "Input Tray Elevation Failure";
3183 "printer-state-reasons.input-tray-missing" = "Input Tray Missing";
3184 "printer-state-reasons.input-tray-position-failure" = "Input Tray Position Failure";
3185 "printer-state-reasons.inserter-added" = "Inserter Added";
3186 "printer-state-reasons.inserter-almost-empty" = "Inserter Almost Empty";
3187 "printer-state-reasons.inserter-almost-full" = "Inserter Almost Full";
3188 "printer-state-reasons.inserter-at-limit" = "Inserter At Limit";
3189 "printer-state-reasons.inserter-closed" = "Inserter Closed";
3190 "printer-state-reasons.inserter-configuration-change" = "Inserter Configuration Change";
3191 "printer-state-reasons.inserter-cover-closed" = "Inserter Cover Closed";
3192 "printer-state-reasons.inserter-cover-open" = "Inserter Cover Open";
3193 "printer-state-reasons.inserter-empty" = "Inserter Empty";
3194 "printer-state-reasons.inserter-full" = "Inserter Full";
3195 "printer-state-reasons.inserter-interlock-closed" = "Inserter Interlock Closed";
3196 "printer-state-reasons.inserter-interlock-open" = "Inserter Interlock Open";
3197 "printer-state-reasons.inserter-jam" = "Inserter Jam";
3198 "printer-state-reasons.inserter-life-almost-over" = "Inserter Life Almost Over";
3199 "printer-state-reasons.inserter-life-over" = "Inserter Life Over";
3200 "printer-state-reasons.inserter-memory-exhausted" = "Inserter Memory Exhausted";
3201 "printer-state-reasons.inserter-missing" = "Inserter Missing";
3202 "printer-state-reasons.inserter-motor-failure" = "Inserter Motor Failure";
3203 "printer-state-reasons.inserter-near-limit" = "Inserter Near Limit";
3204 "printer-state-reasons.inserter-offline" = "Inserter Offline";
3205 "printer-state-reasons.inserter-opened" = "Inserter Opened";
3206 "printer-state-reasons.inserter-over-temperature" = "Inserter Over Temperature";
3207 "printer-state-reasons.inserter-power-saver" = "Inserter Power Saver";
3208 "printer-state-reasons.inserter-recoverable-failure" = "Inserter Recoverable Failure";
3209 "printer-state-reasons.inserter-recoverable-storage" = "Inserter Recoverable Storage";
3210 "printer-state-reasons.inserter-removed" = "Inserter Removed";
3211 "printer-state-reasons.inserter-resource-added" = "Inserter Resource Added";
3212 "printer-state-reasons.inserter-resource-removed" = "Inserter Resource Removed";
3213 "printer-state-reasons.inserter-thermistor-failure" = "Inserter Thermistor Failure";
3214 "printer-state-reasons.inserter-timing-failure" = "Inserter Timing Failure";
3215 "printer-state-reasons.inserter-turned-off" = "Inserter Turned Off";
3216 "printer-state-reasons.inserter-turned-on" = "Inserter Turned On";
3217 "printer-state-reasons.inserter-under-temperature" = "Inserter Under Temperature";
3218 "printer-state-reasons.inserter-unrecoverable-failure" = "Inserter Unrecoverable Failure";
3219 "printer-state-reasons.inserter-unrecoverable-storage-error" = "Inserter Unrecoverable Storage Error";
3220 "printer-state-reasons.inserter-warming-up" = "Inserter Warming Up";
3221 "printer-state-reasons.interlock-closed" = "Interlock Closed";
3222 "printer-state-reasons.interlock-open" = "Interlock Open";
3223 "printer-state-reasons.interpreter-cartridge-added" = "Interpreter Cartridge Added";
3224 "printer-state-reasons.interpreter-cartridge-deleted" = "Interpreter Cartridge Removed";
3225 "printer-state-reasons.interpreter-complex-page-encountered" = "Interpreter Complex Page Encountered";
3226 "printer-state-reasons.interpreter-memory-decrease" = "Interpreter Memory Decrease";
3227 "printer-state-reasons.interpreter-memory-increase" = "Interpreter Memory Increase";
3228 "printer-state-reasons.interpreter-resource-added" = "Interpreter Resource Added";
3229 "printer-state-reasons.interpreter-resource-deleted" = "Interpreter Resource Deleted";
3230 "printer-state-reasons.interpreter-resource-unavailable" = "Interpreter Resource Unavailable";
3231 "printer-state-reasons.lamp-at-eol" = "Lamp At End of Life";
3232 "printer-state-reasons.lamp-failure" = "Lamp Failure";
3233 "printer-state-reasons.lamp-near-eol" = "Lamp Near End of Life";
3234 "printer-state-reasons.laser-at-eol" = "Laser At End of Life";
3235 "printer-state-reasons.laser-failure" = "Laser Failure";
3236 "printer-state-reasons.laser-near-eol" = "Laser Near End of Life";
3237 "printer-state-reasons.make-envelope-added" = "Envelope Maker Added";
3238 "printer-state-reasons.make-envelope-almost-empty" = "Envelope Maker Almost Empty";
3239 "printer-state-reasons.make-envelope-almost-full" = "Envelope Maker Almost Full";
3240 "printer-state-reasons.make-envelope-at-limit" = "Envelope Maker At Limit";
3241 "printer-state-reasons.make-envelope-closed" = "Envelope Maker Closed";
3242 "printer-state-reasons.make-envelope-configuration-change" = "Envelope Maker Configuration Change";
3243 "printer-state-reasons.make-envelope-cover-closed" = "Envelope Maker Cover Closed";
3244 "printer-state-reasons.make-envelope-cover-open" = "Envelope Maker Cover Open";
3245 "printer-state-reasons.make-envelope-empty" = "Envelope Maker Empty";
3246 "printer-state-reasons.make-envelope-full" = "Envelope Maker Full";
3247 "printer-state-reasons.make-envelope-interlock-closed" = "Envelope Maker Interlock Closed";
3248 "printer-state-reasons.make-envelope-interlock-open" = "Envelope Maker Interlock Open";
3249 "printer-state-reasons.make-envelope-jam" = "Envelope Maker Jam";
3250 "printer-state-reasons.make-envelope-life-almost-over" = "Envelope Maker Life Almost Over";
3251 "printer-state-reasons.make-envelope-life-over" = "Envelope Maker Life Over";
3252 "printer-state-reasons.make-envelope-memory-exhausted" = "Envelope Maker Memory Exhausted";
3253 "printer-state-reasons.make-envelope-missing" = "Envelope Maker Missing";
3254 "printer-state-reasons.make-envelope-motor-failure" = "Envelope Maker Motor Failure";
3255 "printer-state-reasons.make-envelope-near-limit" = "Envelope Maker Near Limit";
3256 "printer-state-reasons.make-envelope-offline" = "Envelope Maker Offline";
3257 "printer-state-reasons.make-envelope-opened" = "Envelope Maker Opened";
3258 "printer-state-reasons.make-envelope-over-temperature" = "Envelope Maker Over Temperature";
3259 "printer-state-reasons.make-envelope-power-saver" = "Envelope Maker Power Saver";
3260 "printer-state-reasons.make-envelope-recoverable-failure" = "Envelope Maker Recoverable Failure";
3261 "printer-state-reasons.make-envelope-recoverable-storage" = "Envelope Maker Recoverable Storage";
3262 "printer-state-reasons.make-envelope-removed" = "Envelope Maker Removed";
3263 "printer-state-reasons.make-envelope-resource-added" = "Envelope Maker Resource Added";
3264 "printer-state-reasons.make-envelope-resource-removed" = "Envelope Maker Resource Removed";
3265 "printer-state-reasons.make-envelope-thermistor-failure" = "Envelope Maker Thermistor Failure";
3266 "printer-state-reasons.make-envelope-timing-failure" = "Envelope Maker Timing Failure";
3267 "printer-state-reasons.make-envelope-turned-off" = "Envelope Maker Turned Off";
3268 "printer-state-reasons.make-envelope-turned-on" = "Envelope Maker Turned On";
3269 "printer-state-reasons.make-envelope-under-temperature" = "Envelope Maker Under Temperature";
3270 "printer-state-reasons.make-envelope-unrecoverable-failure" = "Envelope Maker Unrecoverable Failure";
3271 "printer-state-reasons.make-envelope-unrecoverable-storage-error" = "Envelope Maker Unrecoverable Storage Error";
3272 "printer-state-reasons.make-envelope-warming-up" = "Envelope Maker Warming Up";
3273 "printer-state-reasons.marker-adjusting-print-quality" = "Marker Adjusting Print Quality";
3274 "printer-state-reasons.marker-developer-almost-empty" = "Marker Developer Almost Empty";
3275 "printer-state-reasons.marker-developer-empty" = "Marker Developer Empty";
3276 "printer-state-reasons.marker-fuser-thermistor-failure" = "Marker Fuser Thermistor Failure";
3277 "printer-state-reasons.marker-fuser-timing-failure" = "Marker Fuser Timing Failure";
3278 "printer-state-reasons.marker-ink-almost-empty" = "Marker Ink Almost Empty";
3279 "printer-state-reasons.marker-ink-empty" = "Marker Ink Empty";
3280 "printer-state-reasons.marker-print-ribbon-almost-empty" = "Marker Print Ribbon Almost Empty";
3281 "printer-state-reasons.marker-print-ribbon-empty" = "Marker Print Ribbon Empty";
3282 "printer-state-reasons.marker-supply-empty" = "Marker Supply Empty";
3283 "printer-state-reasons.marker-supply-low" = "Marker Supply Low";
3284 "printer-state-reasons.marker-toner-cartridge-missing" = "Marker Toner Cartridge Missing";
3285 "printer-state-reasons.marker-waste-almost-full" = "Marker Waste Almost Full";
3286 "printer-state-reasons.marker-waste-full" = "Marker Waste Full";
3287 "printer-state-reasons.marker-waste-ink-receptacle-almost-full" = "Marker Waste Ink Receptacle Almost Full";
3288 "printer-state-reasons.marker-waste-ink-receptacle-full" = "Marker Waste Ink Receptacle Full";
3289 "printer-state-reasons.marker-waste-toner-receptacle-almost-full" = "Marker Waste Toner Receptacle Almost Full";
3290 "printer-state-reasons.marker-waste-toner-receptacle-full" = "Marker Waste Toner Receptacle Full";
3291 "printer-state-reasons.material-empty" = "Material Empty";
3292 "printer-state-reasons.material-low" = "Material Low";
3293 "printer-state-reasons.material-needed" = "Material Needed";
3294 "printer-state-reasons.media-empty" = "Media Empty";
3295 "printer-state-reasons.media-jam" = "Media Jam";
3296 "printer-state-reasons.media-low" = "Media Low";
3297 "printer-state-reasons.media-needed" = "Media Needed";
3298 "printer-state-reasons.media-path-cannot-duplex-media-selected" = "Media Path Cannot Do 2-Sided Printing";
3299 "printer-state-reasons.media-path-media-tray-almost-full" = "Media Path Media Tray Almost Full";
3300 "printer-state-reasons.media-path-media-tray-full" = "Media Path Media Tray Full";
3301 "printer-state-reasons.media-path-media-tray-missing" = "Media Path Media Tray Missing";
3302 "printer-state-reasons.motor-failure" = "Motor Failure";
3303 "printer-state-reasons.moving-to-paused" = "Moving To Paused";
3304 "printer-state-reasons.none" = "None";
3305 "printer-state-reasons.opc-life-over" = "Optical Photoconductor Life Over";
3306 "printer-state-reasons.opc-near-eol" = "Optical Photoconductor Near End-of-life";
3307 "printer-state-reasons.other" = "Other";
3308 "printer-state-reasons.output-area-almost-full" = "Output Area Almost Full";
3309 "printer-state-reasons.output-area-full" = "Output Area Full";
3310 "printer-state-reasons.output-mailbox-select-failure" = "Output Mailbox Select Failure";
3311 "printer-state-reasons.output-tray-missing" = "Output Tray Missing";
3312 "printer-state-reasons.paused" = "Paused";
3313 "printer-state-reasons.perforater-added" = "Perforater Added";
3314 "printer-state-reasons.perforater-almost-empty" = "Perforater Almost Empty";
3315 "printer-state-reasons.perforater-almost-full" = "Perforater Almost Full";
3316 "printer-state-reasons.perforater-at-limit" = "Perforater At Limit";
3317 "printer-state-reasons.perforater-closed" = "Perforater Closed";
3318 "printer-state-reasons.perforater-configuration-change" = "Perforater Configuration Change";
3319 "printer-state-reasons.perforater-cover-closed" = "Perforater Cover Closed";
3320 "printer-state-reasons.perforater-cover-open" = "Perforater Cover Open";
3321 "printer-state-reasons.perforater-empty" = "Perforater Empty";
3322 "printer-state-reasons.perforater-full" = "Perforater Full";
3323 "printer-state-reasons.perforater-interlock-closed" = "Perforater Interlock Closed";
3324 "printer-state-reasons.perforater-interlock-open" = "Perforater Interlock Open";
3325 "printer-state-reasons.perforater-jam" = "Perforater Jam";
3326 "printer-state-reasons.perforater-life-almost-over" = "Perforater Life Almost Over";
3327 "printer-state-reasons.perforater-life-over" = "Perforater Life Over";
3328 "printer-state-reasons.perforater-memory-exhausted" = "Perforater Memory Exhausted";
3329 "printer-state-reasons.perforater-missing" = "Perforater Missing";
3330 "printer-state-reasons.perforater-motor-failure" = "Perforater Motor Failure";
3331 "printer-state-reasons.perforater-near-limit" = "Perforater Near Limit";
3332 "printer-state-reasons.perforater-offline" = "Perforater Offline";
3333 "printer-state-reasons.perforater-opened" = "Perforater Opened";
3334 "printer-state-reasons.perforater-over-temperature" = "Perforater Over Temperature";
3335 "printer-state-reasons.perforater-power-saver" = "Perforater Power Saver";
3336 "printer-state-reasons.perforater-recoverable-failure" = "Perforater Recoverable Failure";
3337 "printer-state-reasons.perforater-recoverable-storage" = "Perforater Recoverable Storage";
3338 "printer-state-reasons.perforater-removed" = "Perforater Removed";
3339 "printer-state-reasons.perforater-resource-added" = "Perforater Resource Added";
3340 "printer-state-reasons.perforater-resource-removed" = "Perforater Resource Removed";
3341 "printer-state-reasons.perforater-thermistor-failure" = "Perforater Thermistor Failure";
3342 "printer-state-reasons.perforater-timing-failure" = "Perforater Timing Failure";
3343 "printer-state-reasons.perforater-turned-off" = "Perforater Turned Off";
3344 "printer-state-reasons.perforater-turned-on" = "Perforater Turned On";
3345 "printer-state-reasons.perforater-under-temperature" = "Perforater Under Temperature";
3346 "printer-state-reasons.perforater-unrecoverable-failure" = "Perforater Unrecoverable Failure";
3347 "printer-state-reasons.perforater-unrecoverable-storage-error" = "Perforater Unrecoverable Storage Error";
3348 "printer-state-reasons.perforater-warming-up" = "Perforater Warming Up";
3349 "printer-state-reasons.power-down" = "Power Down";
3350 "printer-state-reasons.power-up" = "Power Up";
3351 "printer-state-reasons.printer-manual-reset" = "Printer Reset Manually";
3352 "printer-state-reasons.printer-nms-reset" = "Printer Reset Remotely";
3353 "printer-state-reasons.printer-ready-to-print" = "Printer Ready To Print";
3354 "printer-state-reasons.puncher-added" = "Puncher Added";
3355 "printer-state-reasons.puncher-almost-empty" = "Puncher Almost Empty";
3356 "printer-state-reasons.puncher-almost-full" = "Puncher Almost Full";
3357 "printer-state-reasons.puncher-at-limit" = "Puncher At Limit";
3358 "printer-state-reasons.puncher-closed" = "Puncher Closed";
3359 "printer-state-reasons.puncher-configuration-change" = "Puncher Configuration Change";
3360 "printer-state-reasons.puncher-cover-closed" = "Puncher Cover Closed";
3361 "printer-state-reasons.puncher-cover-open" = "Puncher Cover Open";
3362 "printer-state-reasons.puncher-empty" = "Puncher Empty";
3363 "printer-state-reasons.puncher-full" = "Puncher Full";
3364 "printer-state-reasons.puncher-interlock-closed" = "Puncher Interlock Closed";
3365 "printer-state-reasons.puncher-interlock-open" = "Puncher Interlock Open";
3366 "printer-state-reasons.puncher-jam" = "Puncher Jam";
3367 "printer-state-reasons.puncher-life-almost-over" = "Puncher Life Almost Over";
3368 "printer-state-reasons.puncher-life-over" = "Puncher Life Over";
3369 "printer-state-reasons.puncher-memory-exhausted" = "Puncher Memory Exhausted";
3370 "printer-state-reasons.puncher-missing" = "Puncher Missing";
3371 "printer-state-reasons.puncher-motor-failure" = "Puncher Motor Failure";
3372 "printer-state-reasons.puncher-near-limit" = "Puncher Near Limit";
3373 "printer-state-reasons.puncher-offline" = "Puncher Offline";
3374 "printer-state-reasons.puncher-opened" = "Puncher Opened";
3375 "printer-state-reasons.puncher-over-temperature" = "Puncher Over Temperature";
3376 "printer-state-reasons.puncher-power-saver" = "Puncher Power Saver";
3377 "printer-state-reasons.puncher-recoverable-failure" = "Puncher Recoverable Failure";
3378 "printer-state-reasons.puncher-recoverable-storage" = "Puncher Recoverable Storage";
3379 "printer-state-reasons.puncher-removed" = "Puncher Removed";
3380 "printer-state-reasons.puncher-resource-added" = "Puncher Resource Added";
3381 "printer-state-reasons.puncher-resource-removed" = "Puncher Resource Removed";
3382 "printer-state-reasons.puncher-thermistor-failure" = "Puncher Thermistor Failure";
3383 "printer-state-reasons.puncher-timing-failure" = "Puncher Timing Failure";
3384 "printer-state-reasons.puncher-turned-off" = "Puncher Turned Off";
3385 "printer-state-reasons.puncher-turned-on" = "Puncher Turned On";
3386 "printer-state-reasons.puncher-under-temperature" = "Puncher Under Temperature";
3387 "printer-state-reasons.puncher-unrecoverable-failure" = "Puncher Unrecoverable Failure";
3388 "printer-state-reasons.puncher-unrecoverable-storage-error" = "Puncher Unrecoverable Storage Error";
3389 "printer-state-reasons.puncher-warming-up" = "Puncher Warming Up";
3390 "printer-state-reasons.separation-cutter-added" = "Separation Cutter Added";
3391 "printer-state-reasons.separation-cutter-almost-empty" = "Separation Cutter Almost Empty";
3392 "printer-state-reasons.separation-cutter-almost-full" = "Separation Cutter Almost Full";
3393 "printer-state-reasons.separation-cutter-at-limit" = "Separation Cutter At Limit";
3394 "printer-state-reasons.separation-cutter-closed" = "Separation Cutter Closed";
3395 "printer-state-reasons.separation-cutter-configuration-change" = "Separation Cutter Configuration Change";
3396 "printer-state-reasons.separation-cutter-cover-closed" = "Separation Cutter Cover Closed";
3397 "printer-state-reasons.separation-cutter-cover-open" = "Separation Cutter Cover Open";
3398 "printer-state-reasons.separation-cutter-empty" = "Separation Cutter Empty";
3399 "printer-state-reasons.separation-cutter-full" = "Separation Cutter Full";
3400 "printer-state-reasons.separation-cutter-interlock-closed" = "Separation Cutter Interlock Closed";
3401 "printer-state-reasons.separation-cutter-interlock-open" = "Separation Cutter Interlock Open";
3402 "printer-state-reasons.separation-cutter-jam" = "Separation Cutter Jam";
3403 "printer-state-reasons.separation-cutter-life-almost-over" = "Separation Cutter Life Almost Over";
3404 "printer-state-reasons.separation-cutter-life-over" = "Separation Cutter Life Over";
3405 "printer-state-reasons.separation-cutter-memory-exhausted" = "Separation Cutter Memory Exhausted";
3406 "printer-state-reasons.separation-cutter-missing" = "Separation Cutter Missing";
3407 "printer-state-reasons.separation-cutter-motor-failure" = "Separation Cutter Motor Failure";
3408 "printer-state-reasons.separation-cutter-near-limit" = "Separation Cutter Near Limit";
3409 "printer-state-reasons.separation-cutter-offline" = "Separation Cutter Offline";
3410 "printer-state-reasons.separation-cutter-opened" = "Separation Cutter Opened";
3411 "printer-state-reasons.separation-cutter-over-temperature" = "Separation Cutter Over Temperature";
3412 "printer-state-reasons.separation-cutter-power-saver" = "Separation Cutter Power Saver";
3413 "printer-state-reasons.separation-cutter-recoverable-failure" = "Separation Cutter Recoverable Failure";
3414 "printer-state-reasons.separation-cutter-recoverable-storage" = "Separation Cutter Recoverable Storage";
3415 "printer-state-reasons.separation-cutter-removed" = "Separation Cutter Removed";
3416 "printer-state-reasons.separation-cutter-resource-added" = "Separation Cutter Resource Added";
3417 "printer-state-reasons.separation-cutter-resource-removed" = "Separation Cutter Resource Removed";
3418 "printer-state-reasons.separation-cutter-thermistor-failure" = "Separation Cutter Thermistor Failure";
3419 "printer-state-reasons.separation-cutter-timing-failure" = "Separation Cutter Timing Failure";
3420 "printer-state-reasons.separation-cutter-turned-off" = "Separation Cutter Turned Off";
3421 "printer-state-reasons.separation-cutter-turned-on" = "Separation Cutter Turned On";
3422 "printer-state-reasons.separation-cutter-under-temperature" = "Separation Cutter Under Temperature";
3423 "printer-state-reasons.separation-cutter-unrecoverable-failure" = "Separation Cutter Unrecoverable Failure";
3424 "printer-state-reasons.separation-cutter-unrecoverable-storage-error" = "Separation Cutter Unrecoverable Storage Error";
3425 "printer-state-reasons.separation-cutter-warming-up" = "Separation Cutter Warming Up";
3426 "printer-state-reasons.sheet-rotator-added" = "Sheet Rotator Added";
3427 "printer-state-reasons.sheet-rotator-almost-empty" = "Sheet Rotator Almost Empty";
3428 "printer-state-reasons.sheet-rotator-almost-full" = "Sheet Rotator Almost Full";
3429 "printer-state-reasons.sheet-rotator-at-limit" = "Sheet Rotator At Limit";
3430 "printer-state-reasons.sheet-rotator-closed" = "Sheet Rotator Closed";
3431 "printer-state-reasons.sheet-rotator-configuration-change" = "Sheet Rotator Configuration Change";
3432 "printer-state-reasons.sheet-rotator-cover-closed" = "Sheet Rotator Cover Closed";
3433 "printer-state-reasons.sheet-rotator-cover-open" = "Sheet Rotator Cover Open";
3434 "printer-state-reasons.sheet-rotator-empty" = "Sheet Rotator Empty";
3435 "printer-state-reasons.sheet-rotator-full" = "Sheet Rotator Full";
3436 "printer-state-reasons.sheet-rotator-interlock-closed" = "Sheet Rotator Interlock Closed";
3437 "printer-state-reasons.sheet-rotator-interlock-open" = "Sheet Rotator Interlock Open";
3438 "printer-state-reasons.sheet-rotator-jam" = "Sheet Rotator Jam";
3439 "printer-state-reasons.sheet-rotator-life-almost-over" = "Sheet Rotator Life Almost Over";
3440 "printer-state-reasons.sheet-rotator-life-over" = "Sheet Rotator Life Over";
3441 "printer-state-reasons.sheet-rotator-memory-exhausted" = "Sheet Rotator Memory Exhausted";
3442 "printer-state-reasons.sheet-rotator-missing" = "Sheet Rotator Missing";
3443 "printer-state-reasons.sheet-rotator-motor-failure" = "Sheet Rotator Motor Failure";
3444 "printer-state-reasons.sheet-rotator-near-limit" = "Sheet Rotator Near Limit";
3445 "printer-state-reasons.sheet-rotator-offline" = "Sheet Rotator Offline";
3446 "printer-state-reasons.sheet-rotator-opened" = "Sheet Rotator Opened";
3447 "printer-state-reasons.sheet-rotator-over-temperature" = "Sheet Rotator Over Temperature";
3448 "printer-state-reasons.sheet-rotator-power-saver" = "Sheet Rotator Power Saver";
3449 "printer-state-reasons.sheet-rotator-recoverable-failure" = "Sheet Rotator Recoverable Failure";
3450 "printer-state-reasons.sheet-rotator-recoverable-storage" = "Sheet Rotator Recoverable Storage";
3451 "printer-state-reasons.sheet-rotator-removed" = "Sheet Rotator Removed";
3452 "printer-state-reasons.sheet-rotator-resource-added" = "Sheet Rotator Resource Added";
3453 "printer-state-reasons.sheet-rotator-resource-removed" = "Sheet Rotator Resource Removed";
3454 "printer-state-reasons.sheet-rotator-thermistor-failure" = "Sheet Rotator Thermistor Failure";
3455 "printer-state-reasons.sheet-rotator-timing-failure" = "Sheet Rotator Timing Failure";
3456 "printer-state-reasons.sheet-rotator-turned-off" = "Sheet Rotator Turned Off";
3457 "printer-state-reasons.sheet-rotator-turned-on" = "Sheet Rotator Turned On";
3458 "printer-state-reasons.sheet-rotator-under-temperature" = "Sheet Rotator Under Temperature";
3459 "printer-state-reasons.sheet-rotator-unrecoverable-failure" = "Sheet Rotator Unrecoverable Failure";
3460 "printer-state-reasons.sheet-rotator-unrecoverable-storage-error" = "Sheet Rotator Unrecoverable Storage Error";
3461 "printer-state-reasons.sheet-rotator-warming-up" = "Sheet Rotator Warming Up";
3462 "printer-state-reasons.shutdown" = "Shutdown";
3463 "printer-state-reasons.slitter-added" = "Slitter Added";
3464 "printer-state-reasons.slitter-almost-empty" = "Slitter Almost Empty";
3465 "printer-state-reasons.slitter-almost-full" = "Slitter Almost Full";
3466 "printer-state-reasons.slitter-at-limit" = "Slitter At Limit";
3467 "printer-state-reasons.slitter-closed" = "Slitter Closed";
3468 "printer-state-reasons.slitter-configuration-change" = "Slitter Configuration Change";
3469 "printer-state-reasons.slitter-cover-closed" = "Slitter Cover Closed";
3470 "printer-state-reasons.slitter-cover-open" = "Slitter Cover Open";
3471 "printer-state-reasons.slitter-empty" = "Slitter Empty";
3472 "printer-state-reasons.slitter-full" = "Slitter Full";
3473 "printer-state-reasons.slitter-interlock-closed" = "Slitter Interlock Closed";
3474 "printer-state-reasons.slitter-interlock-open" = "Slitter Interlock Open";
3475 "printer-state-reasons.slitter-jam" = "Slitter Jam";
3476 "printer-state-reasons.slitter-life-almost-over" = "Slitter Life Almost Over";
3477 "printer-state-reasons.slitter-life-over" = "Slitter Life Over";
3478 "printer-state-reasons.slitter-memory-exhausted" = "Slitter Memory Exhausted";
3479 "printer-state-reasons.slitter-missing" = "Slitter Missing";
3480 "printer-state-reasons.slitter-motor-failure" = "Slitter Motor Failure";
3481 "printer-state-reasons.slitter-near-limit" = "Slitter Near Limit";
3482 "printer-state-reasons.slitter-offline" = "Slitter Offline";
3483 "printer-state-reasons.slitter-opened" = "Slitter Opened";
3484 "printer-state-reasons.slitter-over-temperature" = "Slitter Over Temperature";
3485 "printer-state-reasons.slitter-power-saver" = "Slitter Power Saver";
3486 "printer-state-reasons.slitter-recoverable-failure" = "Slitter Recoverable Failure";
3487 "printer-state-reasons.slitter-recoverable-storage" = "Slitter Recoverable Storage";
3488 "printer-state-reasons.slitter-removed" = "Slitter Removed";
3489 "printer-state-reasons.slitter-resource-added" = "Slitter Resource Added";
3490 "printer-state-reasons.slitter-resource-removed" = "Slitter Resource Removed";
3491 "printer-state-reasons.slitter-thermistor-failure" = "Slitter Thermistor Failure";
3492 "printer-state-reasons.slitter-timing-failure" = "Slitter Timing Failure";
3493 "printer-state-reasons.slitter-turned-off" = "Slitter Turned Off";
3494 "printer-state-reasons.slitter-turned-on" = "Slitter Turned On";
3495 "printer-state-reasons.slitter-under-temperature" = "Slitter Under Temperature";
3496 "printer-state-reasons.slitter-unrecoverable-failure" = "Slitter Unrecoverable Failure";
3497 "printer-state-reasons.slitter-unrecoverable-storage-error" = "Slitter Unrecoverable Storage Error";
3498 "printer-state-reasons.slitter-warming-up" = "Slitter Warming Up";
3499 "printer-state-reasons.spool-area-full" = "Spool Area Full";
3500 "printer-state-reasons.stacker-added" = "Stacker Added";
3501 "printer-state-reasons.stacker-almost-empty" = "Stacker Almost Empty";
3502 "printer-state-reasons.stacker-almost-full" = "Stacker Almost Full";
3503 "printer-state-reasons.stacker-at-limit" = "Stacker At Limit";
3504 "printer-state-reasons.stacker-closed" = "Stacker Closed";
3505 "printer-state-reasons.stacker-configuration-change" = "Stacker Configuration Change";
3506 "printer-state-reasons.stacker-cover-closed" = "Stacker Cover Closed";
3507 "printer-state-reasons.stacker-cover-open" = "Stacker Cover Open";
3508 "printer-state-reasons.stacker-empty" = "Stacker Empty";
3509 "printer-state-reasons.stacker-full" = "Stacker Full";
3510 "printer-state-reasons.stacker-interlock-closed" = "Stacker Interlock Closed";
3511 "printer-state-reasons.stacker-interlock-open" = "Stacker Interlock Open";
3512 "printer-state-reasons.stacker-jam" = "Stacker Jam";
3513 "printer-state-reasons.stacker-life-almost-over" = "Stacker Life Almost Over";
3514 "printer-state-reasons.stacker-life-over" = "Stacker Life Over";
3515 "printer-state-reasons.stacker-memory-exhausted" = "Stacker Memory Exhausted";
3516 "printer-state-reasons.stacker-missing" = "Stacker Missing";
3517 "printer-state-reasons.stacker-motor-failure" = "Stacker Motor Failure";
3518 "printer-state-reasons.stacker-near-limit" = "Stacker Near Limit";
3519 "printer-state-reasons.stacker-offline" = "Stacker Offline";
3520 "printer-state-reasons.stacker-opened" = "Stacker Opened";
3521 "printer-state-reasons.stacker-over-temperature" = "Stacker Over Temperature";
3522 "printer-state-reasons.stacker-power-saver" = "Stacker Power Saver";
3523 "printer-state-reasons.stacker-recoverable-failure" = "Stacker Recoverable Failure";
3524 "printer-state-reasons.stacker-recoverable-storage" = "Stacker Recoverable Storage";
3525 "printer-state-reasons.stacker-removed" = "Stacker Removed";
3526 "printer-state-reasons.stacker-resource-added" = "Stacker Resource Added";
3527 "printer-state-reasons.stacker-resource-removed" = "Stacker Resource Removed";
3528 "printer-state-reasons.stacker-thermistor-failure" = "Stacker Thermistor Failure";
3529 "printer-state-reasons.stacker-timing-failure" = "Stacker Timing Failure";
3530 "printer-state-reasons.stacker-turned-off" = "Stacker Turned Off";
3531 "printer-state-reasons.stacker-turned-on" = "Stacker Turned On";
3532 "printer-state-reasons.stacker-under-temperature" = "Stacker Under Temperature";
3533 "printer-state-reasons.stacker-unrecoverable-failure" = "Stacker Unrecoverable Failure";
3534 "printer-state-reasons.stacker-unrecoverable-storage-error" = "Stacker Unrecoverable Storage Error";
3535 "printer-state-reasons.stacker-warming-up" = "Stacker Warming Up";
3536 "printer-state-reasons.stapler-added" = "Stapler Added";
3537 "printer-state-reasons.stapler-almost-empty" = "Stapler Almost Empty";
3538 "printer-state-reasons.stapler-almost-full" = "Stapler Almost Full";
3539 "printer-state-reasons.stapler-at-limit" = "Stapler At Limit";
3540 "printer-state-reasons.stapler-closed" = "Stapler Closed";
3541 "printer-state-reasons.stapler-configuration-change" = "Stapler Configuration Change";
3542 "printer-state-reasons.stapler-cover-closed" = "Stapler Cover Closed";
3543 "printer-state-reasons.stapler-cover-open" = "Stapler Cover Open";
3544 "printer-state-reasons.stapler-empty" = "Stapler Empty";
3545 "printer-state-reasons.stapler-full" = "Stapler Full";
3546 "printer-state-reasons.stapler-interlock-closed" = "Stapler Interlock Closed";
3547 "printer-state-reasons.stapler-interlock-open" = "Stapler Interlock Open";
3548 "printer-state-reasons.stapler-jam" = "Stapler Jam";
3549 "printer-state-reasons.stapler-life-almost-over" = "Stapler Life Almost Over";
3550 "printer-state-reasons.stapler-life-over" = "Stapler Life Over";
3551 "printer-state-reasons.stapler-memory-exhausted" = "Stapler Memory Exhausted";
3552 "printer-state-reasons.stapler-missing" = "Stapler Missing";
3553 "printer-state-reasons.stapler-motor-failure" = "Stapler Motor Failure";
3554 "printer-state-reasons.stapler-near-limit" = "Stapler Near Limit";
3555 "printer-state-reasons.stapler-offline" = "Stapler Offline";
3556 "printer-state-reasons.stapler-opened" = "Stapler Opened";
3557 "printer-state-reasons.stapler-over-temperature" = "Stapler Over Temperature";
3558 "printer-state-reasons.stapler-power-saver" = "Stapler Power Saver";
3559 "printer-state-reasons.stapler-recoverable-failure" = "Stapler Recoverable Failure";
3560 "printer-state-reasons.stapler-recoverable-storage" = "Stapler Recoverable Storage";
3561 "printer-state-reasons.stapler-removed" = "Stapler Removed";
3562 "printer-state-reasons.stapler-resource-added" = "Stapler Resource Added";
3563 "printer-state-reasons.stapler-resource-removed" = "Stapler Resource Removed";
3564 "printer-state-reasons.stapler-thermistor-failure" = "Stapler Thermistor Failure";
3565 "printer-state-reasons.stapler-timing-failure" = "Stapler Timing Failure";
3566 "printer-state-reasons.stapler-turned-off" = "Stapler Turned Off";
3567 "printer-state-reasons.stapler-turned-on" = "Stapler Turned On";
3568 "printer-state-reasons.stapler-under-temperature" = "Stapler Under Temperature";
3569 "printer-state-reasons.stapler-unrecoverable-failure" = "Stapler Unrecoverable Failure";
3570 "printer-state-reasons.stapler-unrecoverable-storage-error" = "Stapler Unrecoverable Storage Error";
3571 "printer-state-reasons.stapler-warming-up" = "Stapler Warming Up";
3572 "printer-state-reasons.stitcher-added" = "Stitcher Added";
3573 "printer-state-reasons.stitcher-almost-empty" = "Stitcher Almost Empty";
3574 "printer-state-reasons.stitcher-almost-full" = "Stitcher Almost Full";
3575 "printer-state-reasons.stitcher-at-limit" = "Stitcher At Limit";
3576 "printer-state-reasons.stitcher-closed" = "Stitcher Closed";
3577 "printer-state-reasons.stitcher-configuration-change" = "Stitcher Configuration Change";
3578 "printer-state-reasons.stitcher-cover-closed" = "Stitcher Cover Closed";
3579 "printer-state-reasons.stitcher-cover-open" = "Stitcher Cover Open";
3580 "printer-state-reasons.stitcher-empty" = "Stitcher Empty";
3581 "printer-state-reasons.stitcher-full" = "Stitcher Full";
3582 "printer-state-reasons.stitcher-interlock-closed" = "Stitcher Interlock Closed";
3583 "printer-state-reasons.stitcher-interlock-open" = "Stitcher Interlock Open";
3584 "printer-state-reasons.stitcher-jam" = "Stitcher Jam";
3585 "printer-state-reasons.stitcher-life-almost-over" = "Stitcher Life Almost Over";
3586 "printer-state-reasons.stitcher-life-over" = "Stitcher Life Over";
3587 "printer-state-reasons.stitcher-memory-exhausted" = "Stitcher Memory Exhausted";
3588 "printer-state-reasons.stitcher-missing" = "Stitcher Missing";
3589 "printer-state-reasons.stitcher-motor-failure" = "Stitcher Motor Failure";
3590 "printer-state-reasons.stitcher-near-limit" = "Stitcher Near Limit";
3591 "printer-state-reasons.stitcher-offline" = "Stitcher Offline";
3592 "printer-state-reasons.stitcher-opened" = "Stitcher Opened";
3593 "printer-state-reasons.stitcher-over-temperature" = "Stitcher Over Temperature";
3594 "printer-state-reasons.stitcher-power-saver" = "Stitcher Power Saver";
3595 "printer-state-reasons.stitcher-recoverable-failure" = "Stitcher Recoverable Failure";
3596 "printer-state-reasons.stitcher-recoverable-storage" = "Stitcher Recoverable Storage";
3597 "printer-state-reasons.stitcher-removed" = "Stitcher Removed";
3598 "printer-state-reasons.stitcher-resource-added" = "Stitcher Resource Added";
3599 "printer-state-reasons.stitcher-resource-removed" = "Stitcher Resource Removed";
3600 "printer-state-reasons.stitcher-thermistor-failure" = "Stitcher Thermistor Failure";
3601 "printer-state-reasons.stitcher-timing-failure" = "Stitcher Timing Failure";
3602 "printer-state-reasons.stitcher-turned-off" = "Stitcher Turned Off";
3603 "printer-state-reasons.stitcher-turned-on" = "Stitcher Turned On";
3604 "printer-state-reasons.stitcher-under-temperature" = "Stitcher Under Temperature";
3605 "printer-state-reasons.stitcher-unrecoverable-failure" = "Stitcher Unrecoverable Failure";
3606 "printer-state-reasons.stitcher-unrecoverable-storage-error" = "Stitcher Unrecoverable Storage Error";
3607 "printer-state-reasons.stitcher-warming-up" = "Stitcher Warming Up";
3608 "printer-state-reasons.stopped-partly" = "Stopped Partly";
3609 "printer-state-reasons.stopping" = "Stopping";
3610 "printer-state-reasons.subunit-added" = "Subunit Added";
3611 "printer-state-reasons.subunit-almost-empty" = "Subunit Almost Empty";
3612 "printer-state-reasons.subunit-almost-full" = "Subunit Almost Full";
3613 "printer-state-reasons.subunit-at-limit" = "Subunit At Limit";
3614 "printer-state-reasons.subunit-closed" = "Subunit Closed";
3615 "printer-state-reasons.subunit-empty" = "Subunit Empty";
3616 "printer-state-reasons.subunit-full" = "Subunit Full";
3617 "printer-state-reasons.subunit-life-almost-over" = "Subunit Life Almost Over";
3618 "printer-state-reasons.subunit-life-over" = "Subunit Life Over";
3619 "printer-state-reasons.subunit-memory-exhausted" = "Subunit Memory Exhausted";
3620 "printer-state-reasons.subunit-missing" = "Subunit Missing";
3621 "printer-state-reasons.subunit-motor-failure" = "Subunit Motor Failure";
3622 "printer-state-reasons.subunit-near-limit" = "Subunit Near Limit";
3623 "printer-state-reasons.subunit-offline" = "Subunit Offline";
3624 "printer-state-reasons.subunit-opened" = "Subunit Opened";
3625 "printer-state-reasons.subunit-over-temperature" = "Subunit Over Temperature";
3626 "printer-state-reasons.subunit-power-saver" = "Subunit Power Saver";
3627 "printer-state-reasons.subunit-recoverable-failure" = "Subunit Recoverable Failure";
3628 "printer-state-reasons.subunit-recoverable-storage" = "Subunit Recoverable Storage";
3629 "printer-state-reasons.subunit-removed" = "Subunit Removed";
3630 "printer-state-reasons.subunit-resource-added" = "Subunit Resource Added";
3631 "printer-state-reasons.subunit-resource-removed" = "Subunit Resource Removed";
3632 "printer-state-reasons.subunit-thermistor-failure" = "Subunit Thermistor Failure";
3633 "printer-state-reasons.subunit-timing-Failure" = "Subunit Timing Failure";
3634 "printer-state-reasons.subunit-turned-off" = "Subunit Turned Off";
3635 "printer-state-reasons.subunit-turned-on" = "Subunit Turned On";
3636 "printer-state-reasons.subunit-under-temperature" = "Subunit Under Temperature";
3637 "printer-state-reasons.subunit-unrecoverable-failure" = "Subunit Unrecoverable Failure";
3638 "printer-state-reasons.subunit-unrecoverable-storage" = "Subunit Unrecoverable Storage";
3639 "printer-state-reasons.subunit-warming-up" = "Subunit Warming Up";
3640 "printer-state-reasons.timed-out" = "Timed Out";
3641 "printer-state-reasons.toner-empty" = "Toner Empty";
3642 "printer-state-reasons.toner-low" = "Toner Low";
3643 "printer-state-reasons.trimmer-added" = "Trimmer Added";
3644 "printer-state-reasons.trimmer-almost-empty" = "Trimmer Almost Empty";
3645 "printer-state-reasons.trimmer-almost-full" = "Trimmer Almost Full";
3646 "printer-state-reasons.trimmer-at-limit" = "Trimmer At Limit";
3647 "printer-state-reasons.trimmer-closed" = "Trimmer Closed";
3648 "printer-state-reasons.trimmer-configuration-change" = "Trimmer Configuration Change";
3649 "printer-state-reasons.trimmer-cover-closed" = "Trimmer Cover Closed";
3650 "printer-state-reasons.trimmer-cover-open" = "Trimmer Cover Open";
3651 "printer-state-reasons.trimmer-empty" = "Trimmer Empty";
3652 "printer-state-reasons.trimmer-full" = "Trimmer Full";
3653 "printer-state-reasons.trimmer-interlock-closed" = "Trimmer Interlock Closed";
3654 "printer-state-reasons.trimmer-interlock-open" = "Trimmer Interlock Open";
3655 "printer-state-reasons.trimmer-jam" = "Trimmer Jam";
3656 "printer-state-reasons.trimmer-life-almost-over" = "Trimmer Life Almost Over";
3657 "printer-state-reasons.trimmer-life-over" = "Trimmer Life Over";
3658 "printer-state-reasons.trimmer-memory-exhausted" = "Trimmer Memory Exhausted";
3659 "printer-state-reasons.trimmer-missing" = "Trimmer Missing";
3660 "printer-state-reasons.trimmer-motor-failure" = "Trimmer Motor Failure";
3661 "printer-state-reasons.trimmer-near-limit" = "Trimmer Near Limit";
3662 "printer-state-reasons.trimmer-offline" = "Trimmer Offline";
3663 "printer-state-reasons.trimmer-opened" = "Trimmer Opened";
3664 "printer-state-reasons.trimmer-over-temperature" = "Trimmer Over Temperature";
3665 "printer-state-reasons.trimmer-power-saver" = "Trimmer Power Saver";
3666 "printer-state-reasons.trimmer-recoverable-failure" = "Trimmer Recoverable Failure";
3667 "printer-state-reasons.trimmer-recoverable-storage" = "Trimmer Recoverable Storage";
3668 "printer-state-reasons.trimmer-removed" = "Trimmer Removed";
3669 "printer-state-reasons.trimmer-resource-added" = "Trimmer Resource Added";
3670 "printer-state-reasons.trimmer-resource-removed" = "Trimmer Resource Removed";
3671 "printer-state-reasons.trimmer-thermistor-failure" = "Trimmer Thermistor Failure";
3672 "printer-state-reasons.trimmer-timing-failure" = "Trimmer Timing Failure";
3673 "printer-state-reasons.trimmer-turned-off" = "Trimmer Turned Off";
3674 "printer-state-reasons.trimmer-turned-on" = "Trimmer Turned On";
3675 "printer-state-reasons.trimmer-under-temperature" = "Trimmer Under Temperature";
3676 "printer-state-reasons.trimmer-unrecoverable-failure" = "Trimmer Unrecoverable Failure";
3677 "printer-state-reasons.trimmer-unrecoverable-storage-error" = "Trimmer Unrecoverable Storage Error";
3678 "printer-state-reasons.trimmer-warming-up" = "Trimmer Warming Up";
3679 "printer-state-reasons.unknown" = "Unknown";
3680 "printer-state-reasons.wrapper-added" = "Wrapper Added";
3681 "printer-state-reasons.wrapper-almost-empty" = "Wrapper Almost Empty";
3682 "printer-state-reasons.wrapper-almost-full" = "Wrapper Almost Full";
3683 "printer-state-reasons.wrapper-at-limit" = "Wrapper At Limit";
3684 "printer-state-reasons.wrapper-closed" = "Wrapper Closed";
3685 "printer-state-reasons.wrapper-configuration-change" = "Wrapper Configuration Change";
3686 "printer-state-reasons.wrapper-cover-closed" = "Wrapper Cover Closed";
3687 "printer-state-reasons.wrapper-cover-open" = "Wrapper Cover Open";
3688 "printer-state-reasons.wrapper-empty" = "Wrapper Empty";
3689 "printer-state-reasons.wrapper-full" = "Wrapper Full";
3690 "printer-state-reasons.wrapper-interlock-closed" = "Wrapper Interlock Closed";
3691 "printer-state-reasons.wrapper-interlock-open" = "Wrapper Interlock Open";
3692 "printer-state-reasons.wrapper-jam" = "Wrapper Jam";
3693 "printer-state-reasons.wrapper-life-almost-over" = "Wrapper Life Almost Over";
3694 "printer-state-reasons.wrapper-life-over" = "Wrapper Life Over";
3695 "printer-state-reasons.wrapper-memory-exhausted" = "Wrapper Memory Exhausted";
3696 "printer-state-reasons.wrapper-missing" = "Wrapper Missing";
3697 "printer-state-reasons.wrapper-motor-failure" = "Wrapper Motor Failure";
3698 "printer-state-reasons.wrapper-near-limit" = "Wrapper Near Limit";
3699 "printer-state-reasons.wrapper-offline" = "Wrapper Offline";
3700 "printer-state-reasons.wrapper-opened" = "Wrapper Opened";
3701 "printer-state-reasons.wrapper-over-temperature" = "Wrapper Over Temperature";
3702 "printer-state-reasons.wrapper-power-saver" = "Wrapper Power Saver";
3703 "printer-state-reasons.wrapper-recoverable-failure" = "Wrapper Recoverable Failure";
3704 "printer-state-reasons.wrapper-recoverable-storage" = "Wrapper Recoverable Storage";
3705 "printer-state-reasons.wrapper-removed" = "Wrapper Removed";
3706 "printer-state-reasons.wrapper-resource-added" = "Wrapper Resource Added";
3707 "printer-state-reasons.wrapper-resource-removed" = "Wrapper Resource Removed";
3708 "printer-state-reasons.wrapper-thermistor-failure" = "Wrapper Thermistor Failure";
3709 "printer-state-reasons.wrapper-timing-failure" = "Wrapper Timing Failure";
3710 "printer-state-reasons.wrapper-turned-off" = "Wrapper Turned Off";
3711 "printer-state-reasons.wrapper-turned-on" = "Wrapper Turned On";
3712 "printer-state-reasons.wrapper-under-temperature" = "Wrapper Under Temperature";
3713 "printer-state-reasons.wrapper-unrecoverable-failure" = "Wrapper Unrecoverable Failure";
3714 "printer-state-reasons.wrapper-unrecoverable-storage-error" = "Wrapper Unrecoverable Storage Error";
3715 "printer-state-reasons.wrapper-warming-up" = "Wrapper Warming Up";
3716 "printer-state.3" = "Idle";
3717 "printer-state.4" = "Processing";
3718 "printer-state.5" = "Stopped";
3719 "printer-up-time" = "Printer Uptime";
3720 "proof-print" = "Proof Print";
3721 "proof-print-copies" = "Proof Print Copies";
3722 "punching" = "Punching";
3723 "punching-locations" = "Punching Locations";
3724 "punching-offset" = "Punching Offset";
3725 "punching-reference-edge" = "Punch Edge";
3726 "punching-reference-edge.bottom" = "Bottom";
3727 "punching-reference-edge.left" = "Left";
3728 "punching-reference-edge.right" = "Right";
3729 "punching-reference-edge.top" = "Top";
3730 "requested-attributes" = "Requested Attributes";
3731 "retry-interval" = "Retry Interval";
3732 "retry-time-out" = "Retry Timeout";
3733 "save-disposition" = "Save Disposition";
3734 "save-disposition.none" = "None";
3735 "save-disposition.print-save" = "Print and Save";
3736 "save-disposition.save-only" = "Save Only";
3737 "save-document-format" = "Save Document Format";
3738 "save-info" = "Save Info";
3739 "save-location" = "Save Location";
3740 "save-name" = "Save Name";
3741 "separator-sheets" = "Separator Sheets";
3742 "separator-sheets-type" = "Type of Separator Sheets";
3743 "separator-sheets-type.both-sheets" = "Start and End Sheets";
3744 "separator-sheets-type.end-sheet" = "End Sheet";
3745 "separator-sheets-type.none" = "None";
3746 "separator-sheets-type.slip-sheets" = "Slip Sheets";
3747 "separator-sheets-type.start-sheet" = "Start Sheet";
3748 "sheet-collate" = "Collate Copies";
3749 "sheet-collate.collated" = "Yes";
3750 "sheet-collate.uncollated" = "No";
3751 "sides" = "2-Sided Printing";
3752 "sides.one-sided" = "Off";
3753 "sides.two-sided-long-edge" = "On (Portrait)";
3754 "sides.two-sided-short-edge" = "On (Landscape)";
3755 "status-message" = "Status Message";
3756 "stitching" = "Staple";
3757 "stitching-angle" = "Stitching Angle";
3758 "stitching-locations" = "Stitching Locations";
3759 "stitching-method" = "Staple Method";
3760 "stitching-method.auto" = "Automatic";
3761 "stitching-method.crimp" = "Crimp";
3762 "stitching-method.wire" = "Wire";
3763 "stitching-offset" = "Stitching Offset";
3764 "stitching-reference-edge" = "Staple Edge";
3765 "stitching-reference-edge.bottom" = "Bottom";
3766 "stitching-reference-edge.left" = "Left";
3767 "stitching-reference-edge.right" = "Right";
3768 "stitching-reference-edge.top" = "Top";
3769 "subject" = "Subject";
3770 "t33-subaddress" = "T33 Subaddress";
3771 "to-name" = "To Name";
3772 "transmission-status" = "Transmission Status";
3773 "transmission-status.3" = "Pending";
3774 "transmission-status.4" = "Pending Retry";
3775 "transmission-status.5" = "Processing";
3776 "transmission-status.7" = "Canceled";
3777 "transmission-status.8" = "Aborted";
3778 "transmission-status.9" = "Completed";
3780 "trimming-offset" = "Cut Position";
3781 "trimming-reference-edge" = "Cut Edge";
3782 "trimming-reference-edge.bottom" = "Bottom";
3783 "trimming-reference-edge.left" = "Left";
3784 "trimming-reference-edge.right" = "Right";
3785 "trimming-reference-edge.top" = "Top";
3786 "trimming-type" = "Type of Cut";
3787 "trimming-type.draw-line" = "Draw Line";
3788 "trimming-type.full" = "Full";
3789 "trimming-type.partial" = "Partial";
3790 "trimming-type.perforate" = "Perforate";
3791 "trimming-type.score" = "Score";
3792 "trimming-type.tab" = "Tab";
3793 "trimming-when" = "Cut After";
3794 "trimming-when.after-documents" = "Every Document";
3795 "trimming-when.after-job" = "Job";
3796 "trimming-when.after-sets" = "Every Set";
3797 "trimming-when.after-sheets" = "Every Page";
3798 "x-accuracy" = "X Accuracy";
3799 "x-dimension" = "X Dimension";
3800 "x-offset" = "X Offset";
3801 "x-origin" = "X Origin";
3802 "y-accuracy" = "Y Accuracy";
3803 "y-dimension" = "Y Dimension";
3804 "y-offset" = "Y Offset";
3805 "y-origin" = "Y Origin";
3806 "z-accuracy" = "Z Accuracy";
3807 "z-dimension" = "Z Dimension";
3808 "z-offset" = "Z Offset";
projects / thirdparty / cups.git / blob