2 * mdadm - manage Linux "md" devices aka RAID arrays.
4 * Copyright (C) 2001-2009 Neil Brown <neilb@suse.de>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 * Email: <neilb@suse.de>
28 #if ! defined(__BIG_ENDIAN) && ! defined(__LITTLE_ENDIAN)
29 #error no endian defined
35 #define offsetof(t,f) ((size_t)&(((t*)0)->f))
38 int Grow_Add_device(char *devname
, int fd
, char *newdev
)
40 /* Add a device to an active array.
41 * Currently, just extend a linear array.
42 * This requires writing a new superblock on the
43 * new device, calling the kernel to add the device,
44 * and if that succeeds, update the superblock on
46 * This means that we need to *find* all other devices.
53 struct supertype
*st
= NULL
;
54 char *subarray
= NULL
;
56 if (ioctl(fd
, GET_ARRAY_INFO
, &info
.array
) < 0) {
57 fprintf(stderr
, Name
": cannot get array info for %s\n", devname
);
61 if (info
.array
.level
!= -1) {
62 fprintf(stderr
, Name
": can only add devices to linear arrays\n");
66 st
= super_by_fd(fd
, &subarray
);
68 fprintf(stderr
, Name
": cannot handle arrays with superblock version %d\n", info
.array
.major_version
);
73 fprintf(stderr
, Name
": Cannot grow linear sub-arrays yet\n");
78 nfd
= open(newdev
, O_RDWR
|O_EXCL
|O_DIRECT
);
80 fprintf(stderr
, Name
": cannot open %s\n", newdev
);
85 if ((stb
.st_mode
& S_IFMT
) != S_IFBLK
) {
86 fprintf(stderr
, Name
": %s is not a block device!\n", newdev
);
91 /* now check out all the devices and make sure we can read the superblock */
92 for (d
=0 ; d
< info
.array
.raid_disks
; d
++) {
96 st
->ss
->free_super(st
);
99 if (ioctl(fd
, GET_DISK_INFO
, &disk
) < 0) {
100 fprintf(stderr
, Name
": cannot get device detail for device %d\n",
106 dv
= map_dev(disk
.major
, disk
.minor
, 1);
108 fprintf(stderr
, Name
": cannot find device file for device %d\n",
114 fd2
= dev_open(dv
, O_RDWR
);
116 fprintf(stderr
, Name
": cannot open device file %s\n", dv
);
122 if (st
->ss
->load_super(st
, fd2
, NULL
)) {
123 fprintf(stderr
, Name
": cannot find super block on %s\n", dv
);
131 /* Ok, looks good. Lets update the superblock and write it out to
135 info
.disk
.number
= d
;
136 info
.disk
.major
= major(stb
.st_rdev
);
137 info
.disk
.minor
= minor(stb
.st_rdev
);
138 info
.disk
.raid_disk
= d
;
139 info
.disk
.state
= (1 << MD_DISK_SYNC
) | (1 << MD_DISK_ACTIVE
);
140 st
->ss
->update_super(st
, &info
, "linear-grow-new", newdev
,
143 if (st
->ss
->store_super(st
, nfd
)) {
144 fprintf(stderr
, Name
": Cannot store new superblock on %s\n",
151 if (ioctl(fd
, ADD_NEW_DISK
, &info
.disk
) != 0) {
152 fprintf(stderr
, Name
": Cannot add new disk to this array\n");
155 /* Well, that seems to have worked.
156 * Now go through and update all superblocks
159 if (ioctl(fd
, GET_ARRAY_INFO
, &info
.array
) < 0) {
160 fprintf(stderr
, Name
": cannot get array info for %s\n", devname
);
165 for (d
=0 ; d
< info
.array
.raid_disks
; d
++) {
166 mdu_disk_info_t disk
;
170 if (ioctl(fd
, GET_DISK_INFO
, &disk
) < 0) {
171 fprintf(stderr
, Name
": cannot get device detail for device %d\n",
175 dv
= map_dev(disk
.major
, disk
.minor
, 1);
177 fprintf(stderr
, Name
": cannot find device file for device %d\n",
181 fd2
= dev_open(dv
, O_RDWR
);
183 fprintf(stderr
, Name
": cannot open device file %s\n", dv
);
186 if (st
->ss
->load_super(st
, fd2
, NULL
)) {
187 fprintf(stderr
, Name
": cannot find super block on %s\n", dv
);
191 info
.array
.raid_disks
= nd
+1;
192 info
.array
.nr_disks
= nd
+1;
193 info
.array
.active_disks
= nd
+1;
194 info
.array
.working_disks
= nd
+1;
196 st
->ss
->update_super(st
, &info
, "linear-grow-update", dv
,
199 if (st
->ss
->store_super(st
, fd2
)) {
200 fprintf(stderr
, Name
": Cannot store new superblock on %s\n", dv
);
210 int Grow_addbitmap(char *devname
, int fd
, char *file
, int chunk
, int delay
, int write_behind
, int force
)
213 * First check that array doesn't have a bitmap
214 * Then create the bitmap
217 * For internal bitmaps, we need to check the version,
218 * find all the active devices, and write the bitmap block
221 mdu_bitmap_file_t bmf
;
222 mdu_array_info_t array
;
223 struct supertype
*st
;
224 char *subarray
= NULL
;
225 int major
= BITMAP_MAJOR_HI
;
226 int vers
= md_get_version(fd
);
227 unsigned long long bitmapsize
, array_size
;
230 major
= BITMAP_MAJOR_HOSTENDIAN
;
231 fprintf(stderr
, Name
": Warning - bitmaps created on this kernel"
232 " are not portable\n"
233 " between different architectures. Consider upgrading"
234 " the Linux kernel.\n");
237 if (ioctl(fd
, GET_BITMAP_FILE
, &bmf
) != 0) {
239 fprintf(stderr
, Name
": Memory allocation failure.\n");
241 fprintf(stderr
, Name
": bitmaps not supported by this kernel.\n");
244 if (bmf
.pathname
[0]) {
245 if (strcmp(file
,"none")==0) {
246 if (ioctl(fd
, SET_BITMAP_FILE
, -1)!= 0) {
247 fprintf(stderr
, Name
": failed to remove bitmap %s\n",
253 fprintf(stderr
, Name
": %s already has a bitmap (%s)\n",
254 devname
, bmf
.pathname
);
257 if (ioctl(fd
, GET_ARRAY_INFO
, &array
) != 0) {
258 fprintf(stderr
, Name
": cannot get array status for %s\n", devname
);
261 if (array
.state
& (1<<MD_SB_BITMAP_PRESENT
)) {
262 if (strcmp(file
, "none")==0) {
263 array
.state
&= ~(1<<MD_SB_BITMAP_PRESENT
);
264 if (ioctl(fd
, SET_ARRAY_INFO
, &array
)!= 0) {
265 fprintf(stderr
, Name
": failed to remove internal bitmap.\n");
270 fprintf(stderr
, Name
": Internal bitmap already present on %s\n",
275 if (strcmp(file
, "none") == 0) {
276 fprintf(stderr
, Name
": no bitmap found on %s\n", devname
);
279 if (array
.level
<= 0) {
280 fprintf(stderr
, Name
": Bitmaps not meaningful with level %s\n",
281 map_num(pers
, array
.level
)?:"of this array");
284 bitmapsize
= array
.size
;
286 if (get_dev_size(fd
, NULL
, &array_size
) &&
287 array_size
> (0x7fffffffULL
<<9)) {
288 /* Array is big enough that we cannot trust array.size
289 * try other approaches
291 bitmapsize
= get_component_size(fd
);
293 if (bitmapsize
== 0) {
294 fprintf(stderr
, Name
": Cannot reliably determine size of array to create bitmap - sorry.\n");
298 if (array
.level
== 10) {
299 int ncopies
= (array
.layout
&255)*((array
.layout
>>8)&255);
300 bitmapsize
= bitmapsize
* array
.raid_disks
/ ncopies
;
303 st
= super_by_fd(fd
, &subarray
);
305 fprintf(stderr
, Name
": Cannot understand version %d.%d\n",
306 array
.major_version
, array
.minor_version
);
310 fprintf(stderr
, Name
": Cannot add bitmaps to sub-arrays yet\n");
315 if (strcmp(file
, "internal") == 0) {
317 if (st
->ss
->add_internal_bitmap
== NULL
) {
318 fprintf(stderr
, Name
": Internal bitmaps not supported "
319 "with %s metadata\n", st
->ss
->name
);
322 for (d
=0; d
< st
->max_devs
; d
++) {
323 mdu_disk_info_t disk
;
326 if (ioctl(fd
, GET_DISK_INFO
, &disk
) < 0)
328 if (disk
.major
== 0 &&
331 if ((disk
.state
& (1<<MD_DISK_SYNC
))==0)
333 dv
= map_dev(disk
.major
, disk
.minor
, 1);
335 int fd2
= dev_open(dv
, O_RDWR
);
338 if (st
->ss
->load_super(st
, fd2
, NULL
)==0) {
339 if (st
->ss
->add_internal_bitmap(
341 &chunk
, delay
, write_behind
,
342 bitmapsize
, 0, major
)
344 st
->ss
->write_bitmap(st
, fd2
);
346 fprintf(stderr
, Name
": failed to create internal bitmap - chunksize problem.\n");
354 array
.state
|= (1<<MD_SB_BITMAP_PRESENT
);
355 if (ioctl(fd
, SET_ARRAY_INFO
, &array
)!= 0) {
358 ": Cannot add bitmap while array is"
359 " resyncing or reshaping etc.\n");
360 fprintf(stderr
, Name
": failed to set internal bitmap.\n");
367 int max_devs
= st
->max_devs
;
369 /* try to load a superblock */
370 for (d
=0; d
<max_devs
; d
++) {
371 mdu_disk_info_t disk
;
375 if (ioctl(fd
, GET_DISK_INFO
, &disk
) < 0)
377 if ((disk
.major
==0 && disk
.minor
==0) ||
378 (disk
.state
& (1<<MD_DISK_REMOVED
)))
380 dv
= map_dev(disk
.major
, disk
.minor
, 1);
382 fd2
= dev_open(dv
, O_RDONLY
);
384 st
->ss
->load_super(st
, fd2
, NULL
) == 0) {
386 st
->ss
->uuid_from_super(st
, uuid
);
392 fprintf(stderr
, Name
": cannot find UUID for array!\n");
395 if (CreateBitmap(file
, force
, (char*)uuid
, chunk
,
396 delay
, write_behind
, bitmapsize
, major
)) {
399 bitmap_fd
= open(file
, O_RDWR
);
401 fprintf(stderr
, Name
": weird: %s cannot be opened\n",
405 if (ioctl(fd
, SET_BITMAP_FILE
, bitmap_fd
) < 0) {
409 ": Cannot add bitmap while array is"
410 " resyncing or reshaping etc.\n");
411 fprintf(stderr
, Name
": Cannot set bitmap file for %s: %s\n",
412 devname
, strerror(err
));
422 * When reshaping an array we might need to backup some data.
423 * This is written to all spares with a 'super_block' describing it.
424 * The superblock goes 4K from the end of the used space on the
426 * It if written after the backup is complete.
427 * It has the following structure.
430 static struct mdp_backup_super
{
431 char magic
[16]; /* md_backup_data-1 or -2 */
434 /* start/sizes in 512byte sectors */
435 __u64 devstart
; /* address on backup device/file of data */
438 __u32 sb_csum
; /* csum of preceeding bytes. */
440 __u64 devstart2
; /* offset in to data of second section */
443 __u32 sb_csum2
; /* csum of preceeding bytes. */
445 } __attribute__((aligned(512))) bsb
, bsb2
;
447 static __u32
bsb_csum(char *buf
, int len
)
451 for (i
=0; i
<len
; i
++)
452 csum
= (csum
<<3) + buf
[0];
453 return __cpu_to_le32(csum
);
456 static int check_idle(struct supertype
*st
)
458 /* Check that all member arrays for this container, or the
459 * container of this array, are idle
461 int container_dev
= (st
->container_dev
!= NoMdDev
462 ? st
->container_dev
: st
->devnum
);
464 struct mdstat_ent
*ent
, *e
;
467 fmt_devname(container
, container_dev
);
468 ent
= mdstat_read(0, 0);
469 for (e
= ent
; e
; e
= e
->next
) {
470 if (!is_container_member(e
, container
))
472 if (e
->percent
>= 0) {
481 static int freeze_container(struct supertype
*st
)
483 int container_dev
= (st
->container_dev
!= NoMdDev
484 ? st
->container_dev
: st
->devnum
);
490 fmt_devname(container
, container_dev
);
492 if (block_monitor(container
, 1)) {
493 fprintf(stderr
, Name
": failed to freeze container\n");
500 static void unfreeze_container(struct supertype
*st
)
502 int container_dev
= (st
->container_dev
!= NoMdDev
503 ? st
->container_dev
: st
->devnum
);
506 fmt_devname(container
, container_dev
);
508 unblock_monitor(container
, 1);
511 static int freeze(struct supertype
*st
)
513 /* Try to freeze resync/rebuild on this array/container.
514 * Return -1 if the array is busy,
515 * return -2 container cannot be frozen,
516 * return 0 if this kernel doesn't support 'frozen'
517 * return 1 if it worked.
519 if (st
->ss
->external
)
520 return freeze_container(st
);
522 struct mdinfo
*sra
= sysfs_read(-1, st
->devnum
, GET_VERSION
);
527 err
= sysfs_freeze_array(sra
);
533 static void unfreeze(struct supertype
*st
)
535 if (st
->ss
->external
)
536 return unfreeze_container(st
);
538 struct mdinfo
*sra
= sysfs_read(-1, st
->devnum
, GET_VERSION
);
541 sysfs_set_str(sra
, NULL
, "sync_action", "idle");
543 fprintf(stderr
, Name
": failed to unfreeze array\n");
548 static void wait_reshape(struct mdinfo
*sra
)
550 int fd
= sysfs_get_fd(sra
, NULL
, "sync_action");
556 while (sysfs_fd_get_str(fd
, action
, 20) > 0 &&
557 strncmp(action
, "reshape", 7) == 0) {
561 select(fd
+1, NULL
, NULL
, &rfds
, NULL
);
566 static int reshape_super(struct supertype
*st
, long long size
, int level
,
567 int layout
, int chunksize
, int raid_disks
,
568 char *backup_file
, char *dev
, int verbose
)
570 /* nothing extra to check in the native case */
571 if (!st
->ss
->external
)
573 if (!st
->ss
->reshape_super
||
574 !st
->ss
->manage_reshape
) {
575 fprintf(stderr
, Name
": %s metadata does not support reshape\n",
580 return st
->ss
->reshape_super(st
, size
, level
, layout
, chunksize
,
581 raid_disks
, backup_file
, dev
, verbose
);
584 static void sync_metadata(struct supertype
*st
)
586 if (st
->ss
->external
) {
587 if (st
->update_tail
) {
588 flush_metadata_updates(st
);
589 st
->update_tail
= &st
->updates
;
591 st
->ss
->sync_metadata(st
);
595 static int subarray_set_num(char *container
, struct mdinfo
*sra
, char *name
, int n
)
597 /* when dealing with external metadata subarrays we need to be
598 * prepared to handle EAGAIN. The kernel may need to wait for
599 * mdmon to mark the array active so the kernel can handle
600 * allocations/writeback when preparing the reshape action
601 * (md_allow_write()). We temporarily disable safe_mode_delay
602 * to close a race with the array_state going clean before the
603 * next write to raid_disks / stripe_cache_size
608 /* only 'raid_disks' and 'stripe_cache_size' trigger md_allow_write */
610 (strcmp(name
, "raid_disks") != 0 &&
611 strcmp(name
, "stripe_cache_size") != 0))
612 return sysfs_set_num(sra
, NULL
, name
, n
);
614 rc
= sysfs_get_str(sra
, NULL
, "safe_mode_delay", safe
, sizeof(safe
));
617 sysfs_set_num(sra
, NULL
, "safe_mode_delay", 0);
618 rc
= sysfs_set_num(sra
, NULL
, name
, n
);
619 if (rc
< 0 && errno
== EAGAIN
) {
620 ping_monitor(container
);
621 /* if we get EAGAIN here then the monitor is not active
624 rc
= sysfs_set_num(sra
, NULL
, name
, n
);
626 sysfs_set_str(sra
, NULL
, "safe_mode_delay", safe
);
630 int start_reshape(struct mdinfo
*sra
)
633 sysfs_set_num(sra
, NULL
, "suspend_lo", 0x7FFFFFFFFFFFFFFFULL
);
634 err
= sysfs_set_num(sra
, NULL
, "suspend_hi", 0);
635 err
= err
?: sysfs_set_num(sra
, NULL
, "suspend_lo", 0);
636 /* Setting sync_min can fail if the recovery is already 'running',
637 * which can happen when restarting an array which is reshaping.
638 * So don't worry about errors here */
639 sysfs_set_num(sra
, NULL
, "sync_min", 0);
640 err
= err
?: sysfs_set_num(sra
, NULL
, "sync_max", 0);
641 err
= err
?: sysfs_set_str(sra
, NULL
, "sync_action", "reshape");
646 void abort_reshape(struct mdinfo
*sra
)
648 sysfs_set_str(sra
, NULL
, "sync_action", "idle");
649 sysfs_set_num(sra
, NULL
, "suspend_lo", 0x7FFFFFFFFFFFFFFFULL
);
650 sysfs_set_num(sra
, NULL
, "suspend_hi", 0);
651 sysfs_set_num(sra
, NULL
, "suspend_lo", 0);
652 sysfs_set_num(sra
, NULL
, "sync_min", 0);
653 sysfs_set_str(sra
, NULL
, "sync_max", "max");
656 int remove_disks_for_takeover(struct supertype
*st
,
661 struct mdinfo
*remaining
;
664 if (sra
->array
.level
== 10)
665 nr_of_copies
= layout
& 0xff;
666 else if (sra
->array
.level
== 1)
667 nr_of_copies
= sra
->array
.raid_disks
;
671 remaining
= sra
->devs
;
673 /* for each 'copy', select one device and remove from the list. */
674 for (slot
= 0; slot
< sra
->array
.raid_disks
; slot
+= nr_of_copies
) {
675 struct mdinfo
**diskp
;
678 /* Find a working device to keep */
679 for (diskp
= &remaining
; *diskp
; diskp
= &(*diskp
)->next
) {
680 struct mdinfo
*disk
= *diskp
;
682 if (disk
->disk
.raid_disk
< slot
)
684 if (disk
->disk
.raid_disk
>= slot
+ nr_of_copies
)
686 if (disk
->disk
.state
& (1<<MD_DISK_REMOVED
))
688 if (disk
->disk
.state
& (1<<MD_DISK_FAULTY
))
690 if (!(disk
->disk
.state
& (1<<MD_DISK_SYNC
)))
693 /* We have found a good disk to use! */
695 disk
->next
= sra
->devs
;
704 if (slot
< sra
->array
.raid_disks
) {
705 /* didn't find all slots */
711 sra
->devs
= remaining
;
715 /* Remove all 'remaining' devices from the array */
717 struct mdinfo
*sd
= remaining
;
718 remaining
= sd
->next
;
720 sysfs_set_str(sra
, sd
, "state", "faulty");
721 sysfs_set_str(sra
, sd
, "slot", "none");
722 sysfs_set_str(sra
, sd
, "state", "remove");
723 sd
->disk
.state
|= (1<<MD_DISK_REMOVED
);
724 sd
->disk
.state
&= ~(1<<MD_DISK_SYNC
);
725 sd
->next
= sra
->devs
;
731 void reshape_free_fdlist(int *fdlist
,
732 unsigned long long *offsets
,
737 for (i
= 0; i
< size
; i
++)
745 int reshape_prepare_fdlist(char *devname
,
749 unsigned long blocks
,
752 unsigned long long *offsets
)
757 for (d
= 0; d
<= nrdisks
; d
++)
760 for (sd
= sra
->devs
; sd
; sd
= sd
->next
) {
761 if (sd
->disk
.state
& (1<<MD_DISK_FAULTY
))
763 if (sd
->disk
.state
& (1<<MD_DISK_SYNC
)) {
764 char *dn
= map_dev(sd
->disk
.major
,
766 fdlist
[sd
->disk
.raid_disk
]
767 = dev_open(dn
, O_RDONLY
);
768 offsets
[sd
->disk
.raid_disk
] = sd
->data_offset
*512;
769 if (fdlist
[sd
->disk
.raid_disk
] < 0) {
771 Name
": %s: cannot open component %s\n",
772 devname
, dn
? dn
: "-unknown-");
776 } else if (backup_file
== NULL
) {
778 char *dn
= map_dev(sd
->disk
.major
,
780 fdlist
[d
] = dev_open(dn
, O_RDWR
);
781 offsets
[d
] = (sd
->data_offset
+ sra
->component_size
- blocks
- 8)*512;
783 fprintf(stderr
, Name
": %s: cannot open component %s\n",
784 devname
, dn
? dn
: "-unknown-");
795 int reshape_open_backup_file(char *backup_file
,
800 unsigned long long *offsets
,
803 /* Return 1 on success, 0 on any form of failure */
804 /* need to check backup file is large enough */
810 *fdlist
= open(backup_file
, O_RDWR
|O_CREAT
|(restart
? O_TRUNC
: O_EXCL
),
814 fprintf(stderr
, Name
": %s: cannot create backup file %s: %s\n",
815 devname
, backup_file
, strerror(errno
));
818 /* Guard against backup file being on array device.
819 * If array is partitioned or if LVM etc is in the
820 * way this will not notice, but it is better than
823 fstat(*fdlist
, &stb
);
826 if (stb
.st_rdev
== dev
) {
827 fprintf(stderr
, Name
": backup file must NOT be"
828 " on the array being reshaped.\n");
834 for (i
=0; i
< blocks
+ 1 ; i
++) {
835 if (write(*fdlist
, buf
, 512) != 512) {
836 fprintf(stderr
, Name
": %s: cannot create"
837 " backup file %s: %s\n",
838 devname
, backup_file
, strerror(errno
));
842 if (fsync(*fdlist
) != 0) {
843 fprintf(stderr
, Name
": %s: cannot create backup file %s: %s\n",
844 devname
, backup_file
, strerror(errno
));
851 unsigned long compute_backup_blocks(int nchunk
, int ochunk
,
852 unsigned int ndata
, unsigned int odata
)
854 unsigned long a
, b
, blocks
;
855 /* So how much do we need to backup.
856 * We need an amount of data which is both a whole number of
857 * old stripes and a whole number of new stripes.
858 * So LCM for (chunksize*datadisks).
860 a
= (ochunk
/512) * odata
;
861 b
= (nchunk
/512) * ndata
;
869 /* LCM == product / GCD */
870 blocks
= (ochunk
/512) * (nchunk
/512) * odata
* ndata
/ a
;
875 char *analyse_change(struct mdinfo
*info
, struct reshape
*re
)
877 /* Based on the current array state in info->array and
878 * the changes in info->new_* etc, determine:
879 * - whether the change is possible
880 * - Intermediate level/raid_disks/layout
881 * - whether a restriping reshape is needed
882 * - number of sectors in minimum change unit. This
883 * will cover a whole number of stripes in 'before' and
886 * Return message if the change should be rejected
887 * NULL if the change can be achieved
889 * This can be called as part of starting a reshape, or
890 * when assembling an array that is undergoing reshape.
894 /* If a new level not explicitly given, we assume no-change */
895 if (info
->new_level
== UnSet
)
896 info
->new_level
= info
->array
.level
;
899 switch (info
->new_level
) {
905 /* chunk size is meaningful, must divide component_size
908 if (info
->component_size
% (info
->new_chunk
/512))
909 return "New chunk size does not"
910 " divide component size";
913 return "chunk size not meaningful for this level";
916 info
->new_chunk
= info
->array
.chunk_size
;
918 switch (info
->array
.level
) {
920 /* RAID1 can convert to RAID1 with different disks, or
921 * raid5 with 2 disks, or
924 if (info
->new_level
== 0) {
926 re
->before
.data_disks
= 1;
927 re
->after
.data_disks
= 1;
928 re
->before
.layout
= 0;
929 re
->backup_blocks
= 0;
933 if (info
->new_level
== 1) {
934 if (info
->delta_disks
== UnSet
)
935 /* Don't know what to do */
936 return "no change requested for Growing RAID1";
938 re
->backup_blocks
= 0;
942 if (info
->array
.raid_disks
== 2 &&
943 info
->new_level
== 5) {
945 re
->before
.data_disks
= 1;
946 re
->after
.data_disks
= 1;
947 re
->before
.layout
= ALGORITHM_LEFT_SYMMETRIC
;
948 info
->array
.chunk_size
= 65536;
951 /* Could do some multi-stage conversions, but leave that to
954 return "Impossibly level change request for RAID1";
957 /* RAID10 can only be converted from near mode to
958 * RAID0 by removing some devices
960 if ((info
->array
.layout
& ~0xff) != 0x100)
961 return "Cannot Grow RAID10 with far/offset layout";
962 /* number of devices must be multiple of number of copies */
963 if (info
->array
.raid_disks
% (info
->array
.layout
& 0xff))
964 return "RAID10 layout too complex for Grow operation";
966 if (info
->new_level
!= 0)
967 return "RAID10 can only be changed to RAID0";
968 new_disks
= (info
->array
.raid_disks
969 / (info
->array
.layout
& 0xff));
970 if (info
->delta_disks
== UnSet
) {
971 info
->delta_disks
= (new_disks
972 - info
->array
.raid_disks
);
974 if (info
->delta_disks
!= new_disks
- info
->array
.raid_disks
)
975 return "New number of raid-devices impossible for RAID10";
976 if (info
->new_chunk
&&
977 info
->new_chunk
!= info
->array
.chunk_size
)
978 return "Cannot change chunk-size with RAID10 Grow";
983 re
->before
.data_disks
= new_disks
;
984 re
->after
.data_disks
= re
->before
.data_disks
;
985 re
->before
.layout
= 0;
986 re
->backup_blocks
= 0;
990 /* RAID0 can be converted to RAID10, or to RAID456 */
991 if (info
->new_level
== 10) {
992 if (info
->new_layout
== UnSet
&& info
->delta_disks
== UnSet
) {
993 /* Assume near=2 layout */
994 info
->new_layout
= 0x102;
995 info
->delta_disks
= info
->array
.raid_disks
;
997 if (info
->new_layout
== UnSet
) {
998 int copies
= 1 + (info
->delta_disks
999 / info
->array
.raid_disks
);
1000 if (info
->array
.raid_disks
* (copies
-1)
1001 != info
->delta_disks
)
1002 return "Impossible number of devices"
1003 " for RAID0->RAID10";
1004 info
->new_layout
= 0x100 + copies
;
1006 if (info
->delta_disks
== UnSet
) {
1007 int copies
= info
->new_layout
& 0xff;
1008 if (info
->new_layout
!= 0x100 + copies
)
1009 return "New layout impossible"
1010 " for RAID0->RAID10";;
1011 info
->delta_disks
= (copies
- 1) *
1012 info
->array
.raid_disks
;
1014 if (info
->new_chunk
&&
1015 info
->new_chunk
!= info
->array
.chunk_size
)
1016 return "Cannot change chunk-size with RAID0->RAID10";
1020 re
->before
.data_disks
= (info
->array
.raid_disks
+
1022 re
->after
.data_disks
= re
->before
.data_disks
;
1023 re
->before
.layout
= info
->new_layout
;
1024 re
->backup_blocks
= 0;
1028 /* RAID0 can also covert to RAID0/4/5/6 by first converting to
1029 * a raid4 style layout of the final level.
1031 switch (info
->new_level
) {
1035 re
->before
.layout
= 0;
1039 re
->before
.layout
= ALGORITHM_PARITY_N
;
1043 re
->before
.layout
= ALGORITHM_PARITY_N
;
1046 return "Impossible level change requested";
1048 re
->before
.data_disks
= info
->array
.raid_disks
;
1049 /* determining 'after' layout happens outside this 'switch' */
1053 info
->array
.layout
= ALGORITHM_PARITY_N
;
1055 switch (info
->new_level
) {
1057 re
->level
= info
->array
.level
;
1058 re
->before
.data_disks
= info
->array
.raid_disks
- 1;
1059 re
->before
.layout
= info
->array
.layout
;
1063 re
->before
.data_disks
= info
->array
.raid_disks
- 1;
1064 re
->before
.layout
= info
->array
.layout
;
1068 re
->before
.data_disks
= info
->array
.raid_disks
- 1;
1069 switch (info
->array
.layout
) {
1070 case ALGORITHM_LEFT_ASYMMETRIC
:
1071 re
->before
.layout
= ALGORITHM_LEFT_ASYMMETRIC_6
;
1073 case ALGORITHM_RIGHT_ASYMMETRIC
:
1074 re
->before
.layout
= ALGORITHM_RIGHT_ASYMMETRIC_6
;
1076 case ALGORITHM_LEFT_SYMMETRIC
:
1077 re
->before
.layout
= ALGORITHM_LEFT_SYMMETRIC_6
;
1079 case ALGORITHM_RIGHT_SYMMETRIC
:
1080 re
->before
.layout
= ALGORITHM_RIGHT_SYMMETRIC_6
;
1082 case ALGORITHM_PARITY_0
:
1083 re
->before
.layout
= ALGORITHM_PARITY_0_6
;
1085 case ALGORITHM_PARITY_N
:
1086 re
->before
.layout
= ALGORITHM_PARITY_N_6
;
1089 return "Cannot convert an array with this layout";
1093 if (info
->array
.raid_disks
!= 2)
1094 return "Can only convert a 2-device array to RAID1";
1098 return "Impossible level change requested";
1102 switch (info
->new_level
) {
1107 re
->before
.data_disks
= info
->array
.raid_disks
- 2;
1108 re
->before
.layout
= info
->array
.layout
;
1111 return "Impossible level change requested";
1116 /* If we reached here then it looks like a re-stripe is
1117 * happening. We have determined the intermediate level
1118 * and initial raid_disks/layout and stored these in 're'.
1120 * We need to deduce the final layout that can be atomically
1121 * converted to the end state.
1123 switch (info
->new_level
) {
1125 /* We can only get to RAID0 from RAID4 or RAID5
1126 * with appropriate layout and one extra device
1128 if (re
->level
!= 4 && re
->level
!= 5)
1129 return "Cannot covert to RAID0 from this level";
1130 if (info
->delta_disks
== UnSet
)
1131 re
->after
.data_disks
= re
->before
.data_disks
;
1133 re
->after
.data_disks
=
1134 info
->array
.raid_disks
+ info
->delta_disks
;
1135 switch (re
->level
) {
1137 re
->after
.layout
= 0 ; break;
1139 re
->after
.layout
= ALGORITHM_PARITY_N
; break;
1144 /* We can only get to RAID4 from RAID5 */
1145 if (re
->level
!= 4 && re
->level
!= 5)
1146 return "Cannot convert to RAID4 from this level";
1147 if (info
->delta_disks
== UnSet
)
1148 re
->after
.data_disks
= re
->before
.data_disks
;
1150 re
->after
.data_disks
=
1151 re
->before
.data_disks
+ info
->delta_disks
;
1152 switch (re
->level
) {
1154 re
->after
.layout
= 0 ; break;
1156 re
->after
.layout
= ALGORITHM_PARITY_N
; break;
1161 /* We get to RAID5 for RAID5 or RAID6 */
1162 if (re
->level
!= 5 && re
->level
!= 6)
1163 return "Cannot convert to RAID5 from this level";
1164 if (info
->delta_disks
== UnSet
)
1165 re
->after
.data_disks
= re
->before
.data_disks
;
1166 else if (re
->level
== 5)
1167 re
->after
.data_disks
=
1168 re
->before
.data_disks
+ info
->delta_disks
;
1170 re
->after
.data_disks
=
1171 info
->array
.raid_disks
+ info
->delta_disks
- 1;
1172 switch (re
->level
) {
1174 if (info
->new_layout
== UnSet
)
1175 re
->after
.layout
= re
->before
.layout
;
1177 re
->after
.layout
= info
->new_layout
;
1180 if (info
->new_layout
== UnSet
)
1181 info
->new_layout
= re
->before
.layout
;
1183 /* after.layout needs to be raid6 version of new_layout */
1184 if (info
->new_layout
== ALGORITHM_PARITY_N
)
1185 re
->after
.layout
= ALGORITHM_PARITY_N
;
1188 char *ls
= map_num(r5layout
, info
->new_layout
);
1190 strcat(strcpy(layout
, ls
), "-6");
1191 l
= map_name(r6layout
, layout
);
1193 return "Cannot find RAID6 layout"
1195 re
->after
.layout
= l
;
1201 /* We must already be at level 6 */
1203 return "Impossible level change";
1204 if (info
->delta_disks
== UnSet
)
1205 re
->after
.data_disks
= re
->before
.data_disks
;
1207 re
->after
.data_disks
= (info
->array
.raid_disks
+
1208 info
->delta_disks
) - 2;
1209 if (info
->new_layout
== UnSet
)
1210 re
->after
.layout
= info
->array
.layout
;
1212 re
->after
.layout
= info
->new_layout
;
1215 return "Impossible level change requested";
1217 switch (re
->level
) {
1218 case 6: re
->parity
= 2; break;
1220 case 5: re
->parity
= 1; break;
1221 default: re
->parity
= 0; break;
1223 /* So we have a restripe operation, we need to calculate the number
1224 * of blocks per reshape operation.
1226 if (info
->new_chunk
== 0)
1227 info
->new_chunk
= info
->array
.chunk_size
;
1228 if (re
->after
.data_disks
== re
->before
.data_disks
&&
1229 re
->after
.layout
== re
->before
.layout
&&
1230 info
->new_chunk
== info
->array
.chunk_size
) {
1231 /* Nothing to change */
1232 re
->backup_blocks
= 0;
1235 if (re
->after
.data_disks
== 1 && re
->before
.data_disks
== 1) {
1236 /* chunk and layout changes make no difference */
1237 re
->backup_blocks
= 0;
1241 if (re
->after
.data_disks
== re
->before
.data_disks
&&
1242 get_linux_version() < 2006032)
1243 return "in-place reshape is not safe before 2.6.32 - sorry.";
1245 if (re
->after
.data_disks
< re
->before
.data_disks
&&
1246 get_linux_version() < 2006030)
1247 return "reshape to fewer devices is not supported before 2.6.32 - sorry.";
1249 re
->backup_blocks
= compute_backup_blocks(
1250 info
->new_chunk
, info
->array
.chunk_size
,
1251 re
->after
.data_disks
,
1252 re
->before
.data_disks
);
1254 re
->new_size
= info
->component_size
* re
->after
.data_disks
;
1258 static int reshape_array(char *container
, int fd
, char *devname
,
1259 struct supertype
*st
, struct mdinfo
*info
,
1260 int force
, char *backup_file
, int quiet
, int forked
,
1262 static int reshape_container(char *container
, int cfd
, char *devname
,
1263 struct supertype
*st
,
1264 struct mdinfo
*info
,
1269 int Grow_reshape(char *devname
, int fd
, int quiet
, char *backup_file
,
1271 int level
, char *layout_str
, int chunksize
, int raid_disks
,
1274 /* Make some changes in the shape of an array.
1275 * The kernel must support the change.
1277 * There are three different changes. Each can trigger
1278 * a resync or recovery so we freeze that until we have
1279 * requested everything (if kernel supports freezing - 2.6.30).
1281 * - change size (i.e. component_size)
1283 * - change layout/chunksize/ndisks
1285 * The last can require a reshape. It is different on different
1286 * levels so we need to check the level before actioning it.
1287 * Some times the level change needs to be requested after the
1288 * reshape (e.g. raid6->raid5, raid5->raid0)
1291 struct mdu_array_info_s array
;
1293 struct supertype
*st
;
1294 char *subarray
= NULL
;
1298 char *container
= NULL
;
1299 char container_buf
[20];
1305 if (ioctl(fd
, GET_ARRAY_INFO
, &array
) < 0) {
1306 fprintf(stderr
, Name
": %s is not an active md array - aborting\n",
1312 (chunksize
|| level
!= UnSet
|| layout_str
|| raid_disks
)) {
1313 fprintf(stderr
, Name
": cannot change component size at the same time "
1314 "as other changes.\n"
1315 " Change size first, then check data is intact before "
1316 "making other changes.\n");
1320 if (raid_disks
&& raid_disks
< array
.raid_disks
&& array
.level
> 1 &&
1321 get_linux_version() < 2006032 &&
1322 !check_env("MDADM_FORCE_FEWER")) {
1323 fprintf(stderr
, Name
": reducing the number of devices is not safe before Linux 2.6.32\n"
1324 " Please use a newer kernel\n");
1328 st
= super_by_fd(fd
, &subarray
);
1330 fprintf(stderr
, Name
": Unable to determine metadata format for %s\n", devname
);
1333 if (raid_disks
> st
->max_devs
) {
1334 fprintf(stderr
, Name
": Cannot increase raid-disks on this array"
1335 " beyond %d\n", st
->max_devs
);
1339 /* in the external case we need to check that the requested reshape is
1340 * supported, and perform an initial check that the container holds the
1341 * pre-requisite spare devices (mdmon owns final validation)
1343 if (st
->ss
->external
) {
1348 container_dev
= st
->container_dev
;
1349 cfd
= open_dev_excl(st
->container_dev
);
1351 container_dev
= st
->devnum
;
1353 cfd
= open_dev_excl(st
->devnum
);
1357 fprintf(stderr
, Name
": Unable to open container for %s\n",
1363 fmt_devname(container_buf
, container_dev
);
1364 container
= container_buf
;
1366 rv
= st
->ss
->load_container(st
, cfd
, NULL
);
1369 fprintf(stderr
, Name
": Cannot read superblock for %s\n",
1375 if (mdmon_running(container_dev
))
1376 st
->update_tail
= &st
->updates
;
1379 if (raid_disks
> array
.raid_disks
&&
1380 array
.spare_disks
< (raid_disks
- array
.raid_disks
) &&
1383 Name
": Need %d spare%s to avoid degraded array,"
1384 " and only have %d.\n"
1385 " Use --force to over-ride this check.\n",
1386 raid_disks
- array
.raid_disks
,
1387 raid_disks
- array
.raid_disks
== 1 ? "" : "s",
1392 sra
= sysfs_read(fd
, 0, GET_LEVEL
| GET_DISKS
| GET_DEVS
1393 | GET_STATE
| GET_VERSION
);
1395 if (st
->ss
->external
&& subarray
== NULL
) {
1396 array
.level
= LEVEL_CONTAINER
;
1397 sra
->array
.level
= LEVEL_CONTAINER
;
1400 fprintf(stderr
, Name
": failed to read sysfs parameters for %s\n",
1404 frozen
= freeze(st
);
1406 /* freeze() already spewed the reason */
1408 } else if (frozen
< 0) {
1409 fprintf(stderr
, Name
": %s is performing resync/recovery and cannot"
1410 " be reshaped\n", devname
);
1414 /* ========= set size =============== */
1415 if (size
>= 0 && (size
== 0 || size
!= array
.size
)) {
1416 long long orig_size
= array
.size
;
1418 if (reshape_super(st
, size
, UnSet
, UnSet
, 0, 0, NULL
, devname
, !quiet
)) {
1424 if (array
.size
!= size
) {
1425 /* got truncated to 32bit, write to
1426 * component_size instead
1429 rv
= sysfs_set_num(sra
, NULL
,
1430 "component_size", size
);
1434 rv
= ioctl(fd
, SET_ARRAY_INFO
, &array
);
1438 /* restore metadata */
1439 if (reshape_super(st
, orig_size
, UnSet
, UnSet
, 0, 0,
1440 NULL
, devname
, !quiet
) == 0)
1442 fprintf(stderr
, Name
": Cannot set device size for %s: %s\n",
1443 devname
, strerror(err
));
1445 (array
.state
& (1<<MD_SB_BITMAP_PRESENT
)))
1446 fprintf(stderr
, " Bitmap must be removed before size can be changed\n");
1450 ioctl(fd
, GET_ARRAY_INFO
, &array
);
1451 size
= get_component_size(fd
)/2;
1455 fprintf(stderr
, Name
": component size of %s has been set to %lluK\n",
1458 } else if (array
.level
!= LEVEL_CONTAINER
) {
1459 size
= get_component_size(fd
)/2;
1464 /* ========= check for Raid10/Raid1 -> Raid0 conversion ===============
1465 * current implementation assumes that following conditions must be met:
1468 * - near_copies == 2
1470 if ((level
== 0 && array
.level
== 10 && sra
&&
1471 array
.layout
== ((1 << 8) + 2) && !(array
.raid_disks
& 1)) ||
1472 (level
== 0 && array
.level
== 1 && sra
)) {
1474 err
= remove_disks_for_takeover(st
, sra
, array
.layout
);
1476 dprintf(Name
": Array cannot be reshaped\n");
1482 /* FIXME this is added with no justification - why is it here */
1483 ping_monitor(container
);
1487 sysfs_init(&info
, fd
, NoMdDev
);
1488 strcpy(info
.text_version
, sra
->text_version
);
1489 info
.component_size
= size
*2;
1490 info
.new_level
= level
;
1491 info
.new_chunk
= chunksize
* 1024;
1493 info
.delta_disks
= raid_disks
- info
.array
.raid_disks
;
1495 info
.delta_disks
= UnSet
;
1496 if (layout_str
== NULL
) {
1497 info
.new_layout
= UnSet
;
1498 if (info
.array
.level
== 6 &&
1499 (info
.new_level
== 6 || info
.new_level
== UnSet
) &&
1500 info
.array
.layout
>= 16) {
1501 fprintf(stderr
, Name
1502 ": %s has a non-standard layout. If you"
1503 " wish to preserve this\n"
1504 " during the reshape, please specify"
1505 " --layout=preserve\n"
1506 " If you want to change it, specify a"
1507 " layout or use --layout=normalise\n",
1512 } else if (strcmp(layout_str
, "normalise") == 0 ||
1513 strcmp(layout_str
, "normalize") == 0) {
1514 /* If we have a -6 RAID6 layout, remove the '-6'. */
1515 info
.new_layout
= UnSet
;
1516 if (info
.array
.level
== 6 && info
.new_level
== UnSet
) {
1518 strcpy(l
, map_num(r6layout
, info
.array
.layout
));
1519 h
= strrchr(l
, '-');
1520 if (h
&& strcmp(h
, "-6") == 0) {
1522 info
.new_layout
= map_name(r6layout
, l
);
1525 } else if (strcmp(layout_str
, "preserve") == 0) {
1526 info
.new_layout
= UnSet
;
1528 int l
= info
.new_level
;
1530 l
= info
.array
.level
;
1533 info
.new_layout
= map_name(r5layout
, layout_str
);
1536 info
.new_layout
= map_name(r6layout
, layout_str
);
1539 info
.new_layout
= parse_layout_10(layout_str
);
1542 info
.new_layout
= parse_layout_faulty(layout_str
);
1545 fprintf(stderr
, Name
": layout not meaningful"
1546 " with this level\n");
1550 if (info
.new_layout
== UnSet
) {
1551 fprintf(stderr
, Name
": layout %s not understood"
1552 " for this level\n",
1559 if (array
.level
== LEVEL_CONTAINER
) {
1560 /* This change is to be applied to every array in the
1561 * container. This is only needed when the metadata imposes
1562 * restraints of the various arrays in the container.
1563 * Currently we only know that IMSM requires all arrays
1564 * to have the same number of devices so changing the
1565 * number of devices (On-Line Capacity Expansion) must be
1566 * performed at the level of the container
1568 rv
= reshape_container(container
, fd
, devname
, st
, &info
,
1569 force
, backup_file
, quiet
);
1572 /* Impose these changes on a single array. First
1573 * check that the metadata is OK with the change. */
1575 if (reshape_super(st
, info
.component_size
, info
.new_level
,
1576 info
.new_layout
, info
.new_chunk
,
1577 info
.array
.raid_disks
+ info
.delta_disks
,
1578 backup_file
, devname
, quiet
)) {
1583 rv
= reshape_array(container
, fd
, devname
, st
, &info
, force
,
1584 backup_file
, quiet
, 0, 0);
1593 static int reshape_array(char *container
, int fd
, char *devname
,
1594 struct supertype
*st
, struct mdinfo
*info
,
1596 char *backup_file
, int quiet
, int forked
,
1599 struct reshape reshape
;
1602 int orig_level
= UnSet
;
1605 struct mdu_array_info_s array
;
1609 unsigned long long *offsets
;
1613 unsigned long blocks
;
1614 unsigned long cache
;
1615 unsigned long long array_size
;
1617 struct mdinfo
*sra
= NULL
;
1619 msg
= analyse_change(info
, &reshape
);
1621 fprintf(stderr
, Name
": %s\n", msg
);
1624 if (ioctl(fd
, GET_ARRAY_INFO
, &array
) != 0) {
1625 dprintf("Canot get array information.\n");
1630 /* reshape already started. just skip to monitoring the reshape */
1631 if (reshape
.backup_blocks
== 0)
1635 spares_needed
= max(reshape
.before
.data_disks
,
1636 reshape
.after
.data_disks
)
1637 + reshape
.parity
- array
.raid_disks
;
1640 info
->new_level
> 1 &&
1641 spares_needed
> info
->array
.spare_disks
) {
1643 Name
": Need %d spare%s to avoid degraded array,"
1644 " and only have %d.\n"
1645 " Use --force to over-ride this check.\n",
1647 spares_needed
== 1 ? "" : "s",
1648 info
->array
.spare_disks
);
1652 if (reshape
.level
!= info
->array
.level
) {
1653 char *c
= map_num(pers
, reshape
.level
);
1658 err
= sysfs_set_str(info
, NULL
, "level", c
);
1661 fprintf(stderr
, Name
": %s: could not set level to %s\n",
1664 (info
->array
.state
& (1<<MD_SB_BITMAP_PRESENT
)))
1665 fprintf(stderr
, " Bitmap must be removed"
1666 " before level can be changed\n");
1670 fprintf(stderr
, Name
": level of %s changed to %s\n",
1672 orig_level
= info
->array
.level
;
1674 if (reshape
.level
> 0 && st
->ss
->external
) {
1675 /* make sure mdmon is aware of the new level */
1676 if (!mdmon_running(st
->container_dev
))
1677 start_mdmon(st
->container_dev
);
1678 ping_monitor(container
);
1681 /* ->reshape_super might have chosen some spares from the
1682 * container that it wants to be part of the new array.
1683 * We can collect them with ->container_content and give
1684 * them to the kernel.
1686 if (st
->ss
->reshape_super
&& st
->ss
->container_content
) {
1687 char *subarray
= strchr(info
->text_version
+1, '/')+1;
1688 struct mdinfo
*info2
=
1689 st
->ss
->container_content(st
, subarray
);
1693 sysfs_init(info2
, fd
, st
->devnum
);
1694 for (d
= info2
->devs
; d
; d
= d
->next
) {
1695 if (d
->disk
.state
== 0 &&
1696 d
->disk
.raid_disk
>= 0) {
1697 /* This is a spare that wants to
1698 * be part of the array.
1700 add_disk(fd
, st
, info2
, d
);
1707 if (reshape
.backup_blocks
== 0) {
1708 /* No restriping needed, but we might need to impose
1709 * some more changes: layout, raid_disks, chunk_size
1711 if (info
->new_layout
!= UnSet
&&
1712 info
->new_layout
!= info
->array
.layout
) {
1713 info
->array
.layout
= info
->new_layout
;
1714 if (ioctl(fd
, SET_ARRAY_INFO
, &info
->array
) != 0) {
1715 fprintf(stderr
, Name
": failed to set new layout\n");
1718 printf("layout for %s set to %d\n",
1719 devname
, info
->array
.layout
);
1721 if (info
->delta_disks
!= UnSet
&&
1722 info
->delta_disks
!= 0) {
1723 info
->array
.raid_disks
+= info
->delta_disks
;
1724 if (ioctl(fd
, SET_ARRAY_INFO
, &info
->array
) != 0) {
1725 fprintf(stderr
, Name
": failed to set raid disks\n");
1728 printf("raid_disks for %s set to %d\n",
1729 devname
, info
->array
.raid_disks
);
1731 if (info
->new_chunk
!= 0 &&
1732 info
->new_chunk
!= info
->array
.chunk_size
) {
1733 if (sysfs_set_num(info
, NULL
,
1734 "chunk_size", info
->new_chunk
) != 0) {
1735 fprintf(stderr
, Name
": failed to set chunk size\n");
1738 printf("chunk size for %s set to %d\n",
1739 devname
, info
->array
.chunk_size
);
1746 * There are three possibilities.
1747 * 1/ The array will shrink.
1748 * We need to ensure the reshape will pause before reaching
1749 * the 'critical section'. We also need to fork and wait for
1750 * that to happen. When it does we
1751 * suspend/backup/complete/unfreeze
1753 * 2/ The array will not change size.
1754 * This requires that we keep a backup of a sliding window
1755 * so that we can restore data after a crash. So we need
1756 * to fork and monitor progress.
1757 * In future we will allow the data_offset to change, so
1758 * a sliding backup becomes unnecessary.
1760 * 3/ The array will grow. This is relatively easy.
1761 * However the kernel's restripe routines will cheerfully
1762 * overwrite some early data before it is safe. So we
1763 * need to make a backup of the early parts of the array
1764 * and be ready to restore it if rebuild aborts very early.
1765 * For externally managed metadata, we still need a forked
1766 * child to monitor the reshape and suspend IO over the region
1767 * that is being reshaped.
1769 * We backup data by writing it to one spare, or to a
1770 * file which was given on command line.
1772 * In each case, we first make sure that storage is available
1773 * for the required backup.
1775 * - request the shape change.
1776 * - fork to handle backup etc.
1779 /* Check that we can hold all the data */
1780 get_dev_size(fd
, NULL
, &array_size
);
1781 if (reshape
.new_size
< (array_size
/512)) {
1783 Name
": this change will reduce the size of the array.\n"
1784 " use --grow --array-size first to truncate array.\n"
1785 " e.g. mdadm --grow %s --array-size %llu\n",
1786 devname
, reshape
.new_size
/2);
1790 sra
= sysfs_read(fd
, 0,
1791 GET_COMPONENT
|GET_DEVS
|GET_OFFSET
|GET_STATE
|GET_CHUNK
|
1794 fprintf(stderr
, Name
": %s: Cannot get array details from sysfs\n",
1799 /* Decide how many blocks (sectors) for a reshape
1800 * unit. The number we have so far is just a minimum
1802 blocks
= reshape
.backup_blocks
;
1803 if (reshape
.before
.data_disks
==
1804 reshape
.after
.data_disks
) {
1805 /* Make 'blocks' bigger for better throughput, but
1806 * not so big that we reject it below.
1807 * Try for 16 megabytes
1809 while (blocks
* 32 < sra
->component_size
&&
1813 fprintf(stderr
, Name
": Need to backup %luK of critical "
1814 "section..\n", blocks
/2);
1816 if (blocks
>= sra
->component_size
/2) {
1817 fprintf(stderr
, Name
": %s: Something wrong"
1818 " - reshape aborted\n",
1823 /* Now we need to open all these devices so we can read/write.
1825 nrdisks
= array
.raid_disks
+ sra
->array
.spare_disks
;
1826 fdlist
= malloc((1+nrdisks
) * sizeof(int));
1827 offsets
= malloc((1+nrdisks
) * sizeof(offsets
[0]));
1828 if (!fdlist
|| !offsets
) {
1829 fprintf(stderr
, Name
": malloc failed: grow aborted\n");
1833 d
= reshape_prepare_fdlist(devname
, sra
, array
.raid_disks
,
1834 nrdisks
, blocks
, backup_file
,
1839 if (backup_file
== NULL
) {
1840 if (reshape
.after
.data_disks
<= reshape
.before
.data_disks
) {
1842 Name
": %s: Cannot grow - need backup-file\n",
1845 } else if (sra
->array
.spare_disks
== 0) {
1846 fprintf(stderr
, Name
": %s: Cannot grow - need a spare or "
1847 "backup-file to backup critical section\n",
1852 if (!reshape_open_backup_file(backup_file
, fd
, devname
,
1854 fdlist
+d
, offsets
+d
, restart
)) {
1860 /* lastly, check that the internal stripe cache is
1861 * large enough, or it won't work.
1862 * It must hold at least 4 stripes of the larger
1865 cache
= max(info
->array
.chunk_size
, info
->new_chunk
);
1866 cache
*= 4; /* 4 stripes minimum */
1867 cache
/= 512; /* convert to sectors */
1868 disks
= min(reshape
.before
.data_disks
, reshape
.after
.data_disks
);
1869 /* make sure there is room for 'blocks' with a bit to spare */
1870 if (cache
< 16 + blocks
/ disks
)
1871 cache
= 16 + blocks
/ disks
;
1872 cache
/= (4096/512); /* Covert from sectors to pages */
1874 if (sra
->cache_size
< cache
)
1875 subarray_set_num(container
, sra
, "stripe_cache_size",
1878 /* Right, everything seems fine. Let's kick things off.
1879 * If only changing raid_disks, use ioctl, else use
1884 sra
->new_chunk
= info
->new_chunk
;
1886 if (info
->reshape_active
)
1887 sra
->reshape_progress
= info
->reshape_progress
;
1889 sra
->reshape_progress
= 0;
1890 if (reshape
.after
.data_disks
< reshape
.before
.data_disks
)
1891 /* start from the end of the new array */
1892 sra
->reshape_progress
= (sra
->component_size
1893 * reshape
.after
.data_disks
);
1896 if (info
->array
.chunk_size
== info
->new_chunk
&&
1897 reshape
.before
.layout
== reshape
.after
.layout
&&
1898 st
->ss
->external
== 0) {
1899 /* use SET_ARRAY_INFO but only if reshape hasn't started */
1900 array
.raid_disks
= reshape
.after
.data_disks
+ reshape
.parity
;
1901 if (!info
->reshape_active
&&
1902 ioctl(fd
, SET_ARRAY_INFO
, &array
) != 0) {
1906 Name
": Cannot set device shape for %s: %s\n",
1907 devname
, strerror(errno
));
1910 (array
.state
& (1<<MD_SB_BITMAP_PRESENT
)))
1912 " Bitmap must be removed before"
1913 " shape can be changed\n");
1918 /* set them all just in case some old 'new_*' value
1919 * persists from some earlier problem.
1920 * We even set them when restarting in the middle. They will
1921 * already be set in that case so this will be a no-op,
1922 * but it is hard to tell the difference.
1925 if (sysfs_set_num(sra
, NULL
, "chunk_size", info
->new_chunk
) < 0)
1927 if (!err
&& sysfs_set_num(sra
, NULL
, "layout",
1928 reshape
.after
.layout
) < 0)
1930 if (!err
&& subarray_set_num(container
, sra
, "raid_disks",
1931 reshape
.after
.data_disks
+
1932 reshape
.parity
) < 0)
1935 fprintf(stderr
, Name
": Cannot set device shape for %s\n",
1939 (array
.state
& (1<<MD_SB_BITMAP_PRESENT
)))
1941 " Bitmap must be removed before"
1942 " shape can be changed\n");
1949 sysfs_set_str(sra
, NULL
, "array_state", "active");
1951 /* Now we just need to kick off the reshape and watch, while
1952 * handling backups of the data...
1953 * This is all done by a forked background process.
1955 switch(forked
? 0 : fork()) {
1957 fprintf(stderr
, Name
": Cannot run child to monitor reshape: %s\n",
1968 if (check_env("MDADM_GROW_VERIFY"))
1969 fd
= open(devname
, O_RDONLY
| O_DIRECT
);
1972 mlockall(MCL_FUTURE
);
1974 odisks
= reshape
.before
.data_disks
+ reshape
.parity
;
1976 if (st
->ss
->external
) {
1977 /* metadata handler takes it from here */
1978 done
= st
->ss
->manage_reshape(
1979 fd
, sra
, &reshape
, st
, blocks
,
1981 d
- odisks
, fdlist
+odisks
,
1984 done
= child_monitor(
1985 fd
, sra
, &reshape
, st
, blocks
,
1987 d
- odisks
, fdlist
+odisks
,
1990 if (backup_file
&& done
)
1991 unlink(backup_file
);
1997 if (!st
->ss
->external
&&
1998 !(reshape
.before
.data_disks
!= reshape
.after
.data_disks
1999 && info
->custom_array_size
) &&
2000 info
->new_level
== reshape
.level
&&
2002 /* no need to wait for the reshape to finish as
2003 * there is nothing more to do.
2009 if (st
->ss
->external
) {
2010 /* Re-load the metadata as much could have changed */
2011 int cfd
= open_dev(st
->container_dev
);
2013 ping_monitor(container
);
2014 st
->ss
->free_super(st
);
2015 st
->ss
->load_container(st
, cfd
, container
);
2020 /* set new array size if required customer_array_size is used
2023 if (reshape
.before
.data_disks
!=
2024 reshape
.after
.data_disks
&&
2025 info
->custom_array_size
) {
2026 struct mdinfo
*info2
;
2027 char *subarray
= strchr(info
->text_version
+1, '/')+1;
2029 info2
= st
->ss
->container_content(st
, subarray
);
2031 unsigned long long current_size
= 0;
2032 unsigned long long new_size
=
2033 info2
->custom_array_size
/2;
2035 if (sysfs_get_ll(sra
,
2038 ¤t_size
) == 0 &&
2039 new_size
> current_size
) {
2040 if (sysfs_set_num(sra
, NULL
,
2041 "array_size", new_size
)
2043 dprintf("Error: Cannot"
2046 dprintf("Array size "
2048 dprintf(" from %llu to %llu.\n",
2049 current_size
, new_size
);
2055 if (info
->new_level
!= reshape
.level
) {
2057 c
= map_num(pers
, info
->new_level
);
2059 err
= sysfs_set_str(sra
, NULL
, "level", c
);
2061 fprintf(stderr
, Name\
2062 ": %s: could not set level "
2063 "to %s\n", devname
, c
);
2072 if (orig_level
!= UnSet
&& sra
) {
2073 c
= map_num(pers
, orig_level
);
2074 if (c
&& sysfs_set_str(sra
, NULL
, "level", c
) == 0)
2075 fprintf(stderr
, Name
": aborting level change\n");
2082 int reshape_container(char *container
, int cfd
, char *devname
,
2083 struct supertype
*st
,
2084 struct mdinfo
*info
,
2089 struct mdinfo
*cc
= NULL
;
2091 /* component_size is not meaningful for a container,
2092 * so pass '-1' meaning 'no change'
2094 if (reshape_super(st
, -1, info
->new_level
,
2095 info
->new_layout
, info
->new_chunk
,
2096 info
->array
.raid_disks
+ info
->delta_disks
,
2097 backup_file
, devname
, quiet
))
2102 /* ping monitor to be sure that update is on disk
2104 ping_monitor(container
);
2107 case -1: /* error */
2108 perror("Cannot fork to complete reshape\n");
2110 default: /* parent */
2111 printf(Name
": multi-array reshape continues in background\n");
2118 /* For each member array with reshape_active,
2119 * we need to perform the reshape.
2120 * We pick the first array that needs reshaping and
2121 * reshape it. reshape_array() will re-read the metadata
2122 * so the next time through a different array should be
2123 * ready for reshape.
2125 struct mdinfo
*content
;
2128 struct mdstat_ent
*mdstat
;
2133 cc
= st
->ss
->container_content(st
, NULL
);
2135 for (content
= cc
; content
; content
= content
->next
) {
2137 if (!content
->reshape_active
)
2140 subarray
= strchr(content
->text_version
+1, '/')+1;
2141 mdstat
= mdstat_by_subdev(subarray
,
2142 devname2devnum(container
));
2150 fd
= open_dev(mdstat
->devnum
);
2153 adev
= map_dev(dev2major(mdstat
->devnum
),
2154 dev2minor(mdstat
->devnum
),
2157 adev
= content
->text_version
;
2159 sysfs_init(content
, fd
, mdstat
->devnum
);
2161 rv
= reshape_array(container
, fd
, adev
, st
,
2163 backup_file
, quiet
, 1, 0);
2174 * We run a child process in the background which performs the following
2176 * - wait for resync to reach a certain point
2177 * - suspend io to the following section
2178 * - backup that section
2179 * - allow resync to proceed further
2181 * - discard the backup.
2183 * When are combined in slightly different ways in the three cases.
2185 * - suspend/backup/allow/wait/resume/discard
2187 * - allow/wait/suspend/backup/allow/wait/resume/discard
2189 * - wait/resume/discard/suspend/backup/allow
2191 * suspend/backup/allow always come together
2192 * wait/resume/discard do too.
2193 * For the same-size case we have two backups to improve flow.
2197 int progress_reshape(struct mdinfo
*info
, struct reshape
*reshape
,
2198 unsigned long long backup_point
,
2199 unsigned long long wait_point
,
2200 unsigned long long *suspend_point
,
2201 unsigned long long *reshape_completed
)
2203 /* This function is called repeatedly by the reshape manager.
2204 * It determines how much progress can safely be made and allows
2206 * - 'info' identifies the array and particularly records in
2207 * ->reshape_progress the metadata's knowledge of progress
2208 * This is a sector offset from the start of the array
2209 * of the next array block to be relocated. This number
2210 * may increase from 0 or decrease from array_size, depending
2211 * on the type of reshape that is happening.
2212 * Note that in contrast, 'sync_completed' is a block count of the
2213 * reshape so far. It gives the distance between the start point
2214 * (head or tail of device) and the next place that data will be
2215 * written. It always increases.
2216 * - 'reshape' is the structure created by analyse_change
2217 * - 'backup_point' shows how much the metadata manager has backed-up
2218 * data. For reshapes with increasing progress, it is the next address
2219 * to be backed up, previous addresses have been backed-up. For
2220 * decreasing progress, it is the earliest address that has been
2221 * backed up - later address are also backed up.
2222 * So addresses between reshape_progress and backup_point are
2223 * backed up providing those are in the 'correct' order.
2224 * - 'wait_point' is an array address. When reshape_completed
2225 * passes this point, progress_reshape should return. It might
2226 * return earlier if it determines that ->reshape_progress needs
2227 * to be updated or further backup is needed.
2228 * - suspend_point is maintained by progress_reshape and the caller
2229 * should not touch it except to initialise to zero.
2230 * It is an array address and it only increases in 2.6.37 and earlier.
2231 * This makes it difficult to handle reducing reshapes with
2232 * external metadata.
2233 * However: it is similar to backup_point in that it records the
2234 * other end of a suspended region from reshape_progress.
2235 * it is moved to extend the region that is safe to backup and/or
2237 * - reshape_completed is read from sysfs and returned. The caller
2238 * should copy this into ->reshape_progress when it has reason to
2239 * believe that the metadata knows this, and any backup outside this
2243 * 1 if more data from backup_point - but only as far as suspend_point,
2244 * should be backed up
2245 * 0 if things are progressing smoothly
2246 * -1 if the reshape is finished, either because it is all done,
2247 * or due to an error.
2250 int advancing
= (reshape
->after
.data_disks
2251 >= reshape
->before
.data_disks
);
2252 unsigned long long need_backup
; /* All data between start of array and
2253 * here will at some point need to
2256 unsigned long long read_offset
, write_offset
;
2257 unsigned long long write_range
;
2258 unsigned long long max_progress
, target
, completed
;
2259 unsigned long long array_size
= (info
->component_size
2260 * reshape
->before
.data_disks
);
2264 /* First, we unsuspend any region that is now known to be safe.
2265 * If suspend_point is on the 'wrong' side of reshape_progress, then
2266 * we don't have or need suspension at the moment. This is true for
2267 * native metadata when we don't need to back-up.
2270 if (info
->reshape_progress
<= *suspend_point
)
2271 sysfs_set_num(info
, NULL
, "suspend_lo",
2272 info
->reshape_progress
);
2274 /* Note: this won't work in 2.6.37 and before.
2275 * Something somewhere should make sure we don't need it!
2277 if (info
->reshape_progress
>= *suspend_point
)
2278 sysfs_set_num(info
, NULL
, "suspend_hi",
2279 info
->reshape_progress
);
2282 /* Now work out how far it is safe to progress.
2283 * If the read_offset for ->reshape_progress is less than
2284 * 'blocks' beyond the write_offset, we can only progress as far
2286 * Otherwise we can progress until the write_offset for the new location
2287 * reaches (within 'blocks' of) the read_offset at the current location.
2288 * However that region must be suspended unless we are using native
2290 * If we need to suspend more, we limit it to 128M per device, which is
2291 * rather arbitrary and should be some time-based calculation.
2293 read_offset
= info
->reshape_progress
/ reshape
->before
.data_disks
;
2294 write_offset
= info
->reshape_progress
/ reshape
->after
.data_disks
;
2295 write_range
= info
->new_chunk
/512;
2296 if (reshape
->before
.data_disks
== reshape
->after
.data_disks
)
2297 need_backup
= array_size
;
2299 need_backup
= reshape
->backup_blocks
;
2301 if (read_offset
< write_offset
+ write_range
)
2302 max_progress
= backup_point
;
2306 reshape
->after
.data_disks
;
2308 if (read_offset
> write_offset
- write_range
)
2309 /* Can only progress as far as has been backed up,
2310 * which must be suspended */
2311 max_progress
= backup_point
;
2312 else if (info
->reshape_progress
<= need_backup
)
2313 max_progress
= backup_point
;
2315 if (info
->array
.major_version
>= 0)
2316 /* Can progress until backup is needed */
2317 max_progress
= need_backup
;
2319 /* Can progress until metadata update is required */
2322 reshape
->after
.data_disks
;
2323 /* but data must be suspended */
2324 if (max_progress
< *suspend_point
)
2325 max_progress
= *suspend_point
;
2330 /* We know it is safe to progress to 'max_progress' providing
2331 * it is suspended or we are using native metadata.
2332 * Consider extending suspend_point 128M per device if it
2333 * is less than 64M per device beyond reshape_progress.
2334 * But always do a multiple of 'blocks'
2335 * FIXME this is too big - it takes to long to complete
2338 target
= 64*1024*2 * min(reshape
->before
.data_disks
,
2339 reshape
->after
.data_disks
);
2340 target
/= reshape
->backup_blocks
;
2343 target
*= reshape
->backup_blocks
;
2345 /* For externally managed metadata we always need to suspend IO to
2346 * the area being reshaped so we regularly push suspend_point forward.
2347 * For native metadata we only need the suspend if we are going to do
2351 if ((need_backup
> info
->reshape_progress
2352 || info
->array
.major_version
< 0) &&
2353 *suspend_point
< info
->reshape_progress
+ target
) {
2354 if (need_backup
< *suspend_point
+ 2 * target
)
2355 *suspend_point
= need_backup
;
2356 else if (*suspend_point
+ 2 * target
< array_size
)
2357 *suspend_point
+= 2 * target
;
2359 *suspend_point
= array_size
;
2360 sysfs_set_num(info
, NULL
, "suspend_hi", *suspend_point
);
2361 if (max_progress
> *suspend_point
)
2362 max_progress
= *suspend_point
;
2365 if (info
->array
.major_version
>= 0) {
2366 /* Only need to suspend when about to backup */
2367 if (info
->reshape_progress
< need_backup
* 2 &&
2368 *suspend_point
> 0) {
2370 sysfs_set_num(info
, NULL
, "suspend_lo", 0);
2371 sysfs_set_num(info
, NULL
, "suspend_hi", need_backup
);
2374 /* Need to suspend continually */
2375 if (info
->reshape_progress
< *suspend_point
)
2376 *suspend_point
= info
->reshape_progress
;
2377 if (*suspend_point
+ target
< info
->reshape_progress
)
2378 /* No need to move suspend region yet */;
2380 if (*suspend_point
>= 2 * target
)
2381 *suspend_point
-= 2 * target
;
2384 sysfs_set_num(info
, NULL
, "suspend_lo",
2387 if (max_progress
< *suspend_point
)
2388 max_progress
= *suspend_point
;
2392 /* now set sync_max to allow that progress. sync_max, like
2393 * sync_completed is a count of sectors written per device, so
2394 * we find the difference between max_progress and the start point,
2395 * and divide that by after.data_disks to get a sync_max
2397 * At the same time we convert wait_point to a similar number
2398 * for comparing against sync_completed.
2400 /* scale down max_progress to per_disk */
2401 max_progress
/= reshape
->after
.data_disks
;
2402 /* Round to chunk size as some kernels give an erroneously high number */
2403 max_progress
/= info
->new_chunk
/512;
2404 max_progress
*= info
->new_chunk
/512;
2405 /* Limit progress to the whole device */
2406 if (max_progress
> info
->component_size
)
2407 max_progress
= info
->component_size
;
2408 wait_point
/= reshape
->after
.data_disks
;
2410 /* switch from 'device offset' to 'processed block count' */
2411 max_progress
= info
->component_size
- max_progress
;
2412 wait_point
= info
->component_size
- wait_point
;
2415 sysfs_set_num(info
, NULL
, "sync_max", max_progress
);
2417 /* Now wait. If we have already reached the point that we were
2418 * asked to wait to, don't wait at all, else wait for any change.
2419 * We need to select on 'sync_completed' as that is the place that
2420 * notifications happen, but we are really interested in
2421 * 'reshape_position'
2423 fd
= sysfs_get_fd(info
, NULL
, "sync_completed");
2425 goto check_progress
;
2427 if (sysfs_fd_get_ll(fd
, &completed
) < 0) {
2429 goto check_progress
;
2431 while (completed
< max_progress
&& completed
< wait_point
) {
2432 /* Check that sync_action is still 'reshape' to avoid
2433 * waiting forever on a dead array
2437 if (sysfs_get_str(info
, NULL
, "sync_action",
2439 strncmp(action
, "reshape", 7) != 0)
2441 /* Some kernels reset 'sync_completed' to zero
2442 * before setting 'sync_action' to 'idle'.
2443 * So we need these extra tests.
2445 if (completed
== 0 && advancing
2446 && info
->reshape_progress
> 0)
2448 if (completed
== 0 && !advancing
2449 && info
->reshape_progress
< (info
->component_size
2450 * reshape
->after
.data_disks
))
2454 select(fd
+1, NULL
, NULL
, &rfds
, NULL
);
2455 if (sysfs_fd_get_ll(fd
, &completed
) < 0) {
2457 goto check_progress
;
2460 /* some kernels can give an incorrectly high 'completed' number */
2461 completed
/= (info
->new_chunk
/512);
2462 completed
*= (info
->new_chunk
/512);
2463 /* Convert 'completed' back in to a 'progress' number */
2464 completed
*= reshape
->after
.data_disks
;
2466 completed
= info
->component_size
* reshape
->after
.data_disks
2469 *reshape_completed
= completed
;
2473 /* We return the need_backup flag. Caller will decide
2474 * how much - a multiple of ->backup_blocks up to *suspend_point
2477 return need_backup
> info
->reshape_progress
;
2479 return need_backup
>= info
->reshape_progress
;
2482 /* if we couldn't read a number from sync_completed, then
2483 * either the reshape did complete, or it aborted.
2484 * We can tell which by checking for 'none' in reshape_position.
2487 if (sysfs_get_str(info
, NULL
, "reshape_position", buf
, sizeof(buf
)) < 0
2488 || strncmp(buf
, "none", 4) != 0)
2489 return -2; /* abort */
2491 /* Maybe racing with array shutdown - check state */
2492 if (sysfs_get_str(info
, NULL
, "array_state", buf
, sizeof(buf
)) < 0
2493 || strncmp(buf
, "inactive", 8) == 0
2494 || strncmp(buf
, "clear",5) == 0)
2495 return -2; /* abort */
2496 return -1; /* complete */
2501 /* FIXME return status is never checked */
2502 static int grow_backup(struct mdinfo
*sra
,
2503 unsigned long long offset
, /* per device */
2504 unsigned long stripes
, /* per device, in old chunks */
2505 int *sources
, unsigned long long *offsets
,
2506 int disks
, int chunk
, int level
, int layout
,
2507 int dests
, int *destfd
, unsigned long long *destoffsets
,
2508 int part
, int *degraded
,
2511 /* Backup 'blocks' sectors at 'offset' on each device of the array,
2512 * to storage 'destfd' (offset 'destoffsets'), after first
2513 * suspending IO. Then allow resync to continue
2514 * over the suspended section.
2515 * Use part 'part' of the backup-super-block.
2520 unsigned long long ll
;
2522 //printf("offset %llu\n", offset);
2528 /* Check that array hasn't become degraded, else we might backup the wrong data */
2529 if (sysfs_get_ll(sra
, NULL
, "degraded", &ll
) < 0)
2530 return -1; /* FIXME this error is ignored */
2531 new_degraded
= (int)ll
;
2532 if (new_degraded
!= *degraded
) {
2533 /* check each device to ensure it is still working */
2535 for (sd
= sra
->devs
; sd
; sd
= sd
->next
) {
2536 if (sd
->disk
.state
& (1<<MD_DISK_FAULTY
))
2538 if (sd
->disk
.state
& (1<<MD_DISK_SYNC
)) {
2540 if (sysfs_get_str(sra
, sd
, "state", sbuf
, 20) < 0 ||
2541 strstr(sbuf
, "faulty") ||
2542 strstr(sbuf
, "in_sync") == NULL
) {
2543 /* this device is dead */
2544 sd
->disk
.state
= (1<<MD_DISK_FAULTY
);
2545 if (sd
->disk
.raid_disk
>= 0 &&
2546 sources
[sd
->disk
.raid_disk
] >= 0) {
2547 close(sources
[sd
->disk
.raid_disk
]);
2548 sources
[sd
->disk
.raid_disk
] = -1;
2553 *degraded
= new_degraded
;
2556 bsb
.arraystart2
= __cpu_to_le64(offset
* odata
);
2557 bsb
.length2
= __cpu_to_le64(stripes
* (chunk
/512) * odata
);
2559 bsb
.arraystart
= __cpu_to_le64(offset
* odata
);
2560 bsb
.length
= __cpu_to_le64(stripes
* (chunk
/512) * odata
);
2563 bsb
.magic
[15] = '2';
2564 for (i
= 0; i
< dests
; i
++)
2566 lseek64(destfd
[i
], destoffsets
[i
] + __le64_to_cpu(bsb
.devstart2
)*512, 0);
2568 lseek64(destfd
[i
], destoffsets
[i
], 0);
2570 rv
= save_stripes(sources
, offsets
,
2571 disks
, chunk
, level
, layout
,
2573 offset
*512*odata
, stripes
* chunk
* odata
,
2578 bsb
.mtime
= __cpu_to_le64(time(0));
2579 for (i
= 0; i
< dests
; i
++) {
2580 bsb
.devstart
= __cpu_to_le64(destoffsets
[i
]/512);
2582 bsb
.sb_csum
= bsb_csum((char*)&bsb
, ((char*)&bsb
.sb_csum
)-((char*)&bsb
));
2583 if (memcmp(bsb
.magic
, "md_backup_data-2", 16) == 0)
2584 bsb
.sb_csum2
= bsb_csum((char*)&bsb
,
2585 ((char*)&bsb
.sb_csum2
)-((char*)&bsb
));
2588 if ((unsigned long long)lseek64(destfd
[i
], destoffsets
[i
] - 4096, 0)
2589 != destoffsets
[i
] - 4096)
2591 if (write(destfd
[i
], &bsb
, 512) != 512)
2593 if (destoffsets
[i
] > 4096) {
2594 if ((unsigned long long)lseek64(destfd
[i
], destoffsets
[i
]+stripes
*chunk
*odata
, 0) !=
2595 destoffsets
[i
]+stripes
*chunk
*odata
)
2597 if (write(destfd
[i
], &bsb
, 512) != 512)
2607 /* in 2.6.30, the value reported by sync_completed can be
2608 * less that it should be by one stripe.
2609 * This only happens when reshape hits sync_max and pauses.
2610 * So allow wait_backup to either extent sync_max further
2611 * than strictly necessary, or return before the
2612 * sync has got quite as far as we would really like.
2613 * This is what 'blocks2' is for.
2614 * The various caller give appropriate values so that
2617 /* FIXME return value is often ignored */
2618 static int forget_backup(
2619 int dests
, int *destfd
, unsigned long long *destoffsets
,
2623 * Erase backup 'part' (which is 0 or 1)
2629 bsb
.arraystart2
= __cpu_to_le64(0);
2630 bsb
.length2
= __cpu_to_le64(0);
2632 bsb
.arraystart
= __cpu_to_le64(0);
2633 bsb
.length
= __cpu_to_le64(0);
2635 bsb
.mtime
= __cpu_to_le64(time(0));
2637 for (i
= 0; i
< dests
; i
++) {
2638 bsb
.devstart
= __cpu_to_le64(destoffsets
[i
]/512);
2639 bsb
.sb_csum
= bsb_csum((char*)&bsb
, ((char*)&bsb
.sb_csum
)-((char*)&bsb
));
2640 if (memcmp(bsb
.magic
, "md_backup_data-2", 16) == 0)
2641 bsb
.sb_csum2
= bsb_csum((char*)&bsb
,
2642 ((char*)&bsb
.sb_csum2
)-((char*)&bsb
));
2643 if ((unsigned long long)lseek64(destfd
[i
], destoffsets
[i
]-4096, 0) !=
2644 destoffsets
[i
]-4096)
2647 write(destfd
[i
], &bsb
, 512) != 512)
2654 static void fail(char *msg
)
2657 rv
= (write(2, msg
, strlen(msg
)) != (int)strlen(msg
));
2658 rv
|= (write(2, "\n", 1) != 1);
2662 static char *abuf
, *bbuf
;
2663 static unsigned long long abuflen
;
2664 static void validate(int afd
, int bfd
, unsigned long long offset
)
2666 /* check that the data in the backup against the array.
2667 * This is only used for regression testing and should not
2668 * be used while the array is active
2672 lseek64(bfd
, offset
- 4096, 0);
2673 if (read(bfd
, &bsb2
, 512) != 512)
2674 fail("cannot read bsb");
2675 if (bsb2
.sb_csum
!= bsb_csum((char*)&bsb2
,
2676 ((char*)&bsb2
.sb_csum
)-((char*)&bsb2
)))
2677 fail("first csum bad");
2678 if (memcmp(bsb2
.magic
, "md_backup_data", 14) != 0)
2679 fail("magic is bad");
2680 if (memcmp(bsb2
.magic
, "md_backup_data-2", 16) == 0 &&
2681 bsb2
.sb_csum2
!= bsb_csum((char*)&bsb2
,
2682 ((char*)&bsb2
.sb_csum2
)-((char*)&bsb2
)))
2683 fail("second csum bad");
2685 if (__le64_to_cpu(bsb2
.devstart
)*512 != offset
)
2686 fail("devstart is wrong");
2689 unsigned long long len
= __le64_to_cpu(bsb2
.length
)*512;
2691 if (abuflen
< len
) {
2695 if (posix_memalign((void**)&abuf
, 4096, abuflen
) ||
2696 posix_memalign((void**)&bbuf
, 4096, abuflen
)) {
2698 /* just stop validating on mem-alloc failure */
2703 lseek64(bfd
, offset
, 0);
2704 if ((unsigned long long)read(bfd
, bbuf
, len
) != len
) {
2705 //printf("len %llu\n", len);
2706 fail("read first backup failed");
2708 lseek64(afd
, __le64_to_cpu(bsb2
.arraystart
)*512, 0);
2709 if ((unsigned long long)read(afd
, abuf
, len
) != len
)
2710 fail("read first from array failed");
2711 if (memcmp(bbuf
, abuf
, len
) != 0) {
2714 printf("offset=%llu len=%llu\n",
2715 (unsigned long long)__le64_to_cpu(bsb2
.arraystart
)*512, len
);
2716 for (i
=0; i
<len
; i
++)
2717 if (bbuf
[i
] != abuf
[i
]) {
2718 printf("first diff byte %d\n", i
);
2722 fail("data1 compare failed");
2726 unsigned long long len
= __le64_to_cpu(bsb2
.length2
)*512;
2728 if (abuflen
< len
) {
2732 abuf
= malloc(abuflen
);
2733 bbuf
= malloc(abuflen
);
2736 lseek64(bfd
, offset
+__le64_to_cpu(bsb2
.devstart2
)*512, 0);
2737 if ((unsigned long long)read(bfd
, bbuf
, len
) != len
)
2738 fail("read second backup failed");
2739 lseek64(afd
, __le64_to_cpu(bsb2
.arraystart2
)*512, 0);
2740 if ((unsigned long long)read(afd
, abuf
, len
) != len
)
2741 fail("read second from array failed");
2742 if (memcmp(bbuf
, abuf
, len
) != 0)
2743 fail("data2 compare failed");
2747 int child_monitor(int afd
, struct mdinfo
*sra
, struct reshape
*reshape
,
2748 struct supertype
*st
, unsigned long blocks
,
2749 int *fds
, unsigned long long *offsets
,
2750 int dests
, int *destfd
, unsigned long long *destoffsets
)
2752 /* Monitor a reshape where backup is being performed using
2753 * 'native' mechanism - either to a backup file, or
2754 * to some space in a spare.
2758 unsigned long long speed
;
2759 unsigned long long suspend_point
, array_size
;
2760 unsigned long long backup_point
, wait_point
;
2761 unsigned long long reshape_completed
;
2763 int increasing
= reshape
->after
.data_disks
>= reshape
->before
.data_disks
;
2764 int part
= 0; /* The next part of the backup area to fill. It may already
2765 * be full, so we need to check */
2766 int level
= reshape
->level
;
2767 int layout
= reshape
->before
.layout
;
2768 int data
= reshape
->before
.data_disks
;
2769 int disks
= reshape
->before
.data_disks
+ reshape
->parity
;
2770 int chunk
= sra
->array
.chunk_size
;
2772 unsigned long stripes
;
2774 /* set up the backup-super-block. This requires the
2775 * uuid from the array.
2777 /* Find a superblock */
2778 for (sd
= sra
->devs
; sd
; sd
= sd
->next
) {
2782 if (sd
->disk
.state
& (1<<MD_DISK_FAULTY
))
2784 dn
= map_dev(sd
->disk
.major
, sd
->disk
.minor
, 1);
2785 devfd
= dev_open(dn
, O_RDONLY
);
2788 ok
= st
->ss
->load_super(st
, devfd
, NULL
);
2794 fprintf(stderr
, Name
": Cannot find a superblock\n");
2798 memset(&bsb
, 0, 512);
2799 memcpy(bsb
.magic
, "md_backup_data-1", 16);
2800 st
->ss
->uuid_from_super(st
, (int*)&bsb
.set_uuid
);
2801 bsb
.mtime
= __cpu_to_le64(time(0));
2802 bsb
.devstart2
= blocks
;
2804 stripes
= blocks
/ (sra
->array
.chunk_size
/512) /
2805 reshape
->before
.data_disks
;
2807 if (posix_memalign((void**)&buf
, 4096, disks
* chunk
))
2808 /* Don't start the 'reshape' */
2810 if (reshape
->before
.data_disks
== reshape
->after
.data_disks
) {
2811 sysfs_get_ll(sra
, NULL
, "sync_speed_min", &speed
);
2812 sysfs_set_num(sra
, NULL
, "sync_speed_min", 200000);
2816 array_size
= sra
->component_size
* reshape
->after
.data_disks
;
2817 backup_point
= sra
->reshape_progress
;
2820 array_size
= sra
->component_size
* reshape
->before
.data_disks
;
2821 backup_point
= reshape
->backup_blocks
;
2822 suspend_point
= array_size
;
2828 /* Want to return as soon the oldest backup slot can
2829 * be released as that allows us to start backing up
2830 * some more, providing suspend_point has been
2831 * advanced, which it should have.
2834 wait_point
= array_size
;
2835 if (part
== 0 && __le64_to_cpu(bsb
.length
) > 0)
2836 wait_point
= (__le64_to_cpu(bsb
.arraystart
) +
2837 __le64_to_cpu(bsb
.length
));
2838 if (part
== 1 && __le64_to_cpu(bsb
.length2
) > 0)
2839 wait_point
= (__le64_to_cpu(bsb
.arraystart2
) +
2840 __le64_to_cpu(bsb
.length2
));
2843 if (part
== 0 && __le64_to_cpu(bsb
.length
) > 0)
2844 wait_point
= __le64_to_cpu(bsb
.arraystart
);
2845 if (part
== 1 && __le64_to_cpu(bsb
.length2
) > 0)
2846 wait_point
= __le64_to_cpu(bsb
.arraystart2
);
2849 rv
= progress_reshape(sra
, reshape
,
2850 backup_point
, wait_point
,
2851 &suspend_point
, &reshape_completed
);
2852 /* external metadata would need to ping_monitor here */
2853 sra
->reshape_progress
= reshape_completed
;
2855 /* Clear any backup region that is before 'here' */
2857 if (reshape_completed
>= (__le64_to_cpu(bsb
.arraystart
) +
2858 __le64_to_cpu(bsb
.length
)))
2859 forget_backup(dests
, destfd
,
2861 if (reshape_completed
>= (__le64_to_cpu(bsb
.arraystart2
) +
2862 __le64_to_cpu(bsb
.length2
)))
2863 forget_backup(dests
, destfd
,
2866 if (reshape_completed
<= (__le64_to_cpu(bsb
.arraystart
)))
2867 forget_backup(dests
, destfd
,
2869 if (reshape_completed
<= (__le64_to_cpu(bsb
.arraystart2
)))
2870 forget_backup(dests
, destfd
,
2881 unsigned long long offset
;
2882 unsigned long actual_stripes
;
2883 /* Need to backup some data.
2884 * If 'part' is not used and the desired
2885 * backup size is suspended, do a backup,
2886 * then consider the next part.
2888 /* Check that 'part' is unused */
2889 if (part
== 0 && __le64_to_cpu(bsb
.length
) != 0)
2891 if (part
== 1 && __le64_to_cpu(bsb
.length2
) != 0)
2894 offset
= backup_point
/ data
;
2895 actual_stripes
= stripes
;
2897 if (offset
+ actual_stripes
* (chunk
/512) >
2898 sra
->component_size
)
2899 actual_stripes
= ((sra
->component_size
- offset
)
2901 if (offset
+ actual_stripes
* (chunk
/512) >
2905 if (offset
< actual_stripes
* (chunk
/512))
2906 actual_stripes
= offset
/ (chunk
/512);
2907 offset
-= actual_stripes
* (chunk
/512);
2908 if (offset
< suspend_point
/data
)
2911 grow_backup(sra
, offset
, actual_stripes
,
2913 disks
, chunk
, level
, layout
,
2914 dests
, destfd
, destoffsets
,
2915 part
, °raded
, buf
);
2916 validate(afd
, destfd
[0], destoffsets
[0]);
2917 /* record where 'part' is up to */
2920 backup_point
+= actual_stripes
* (chunk
/512) * data
;
2922 backup_point
-= actual_stripes
* (chunk
/512) * data
;
2926 /* FIXME maybe call progress_reshape one more time instead */
2927 abort_reshape(sra
); /* remove any remaining suspension */
2928 if (reshape
->before
.data_disks
== reshape
->after
.data_disks
)
2929 sysfs_set_num(sra
, NULL
, "sync_speed_min", speed
);
2935 * If any spare contains md_back_data-1 which is recent wrt mtime,
2936 * write that data into the array and update the super blocks with
2937 * the new reshape_progress
2939 int Grow_restart(struct supertype
*st
, struct mdinfo
*info
, int *fdlist
, int cnt
,
2940 char *backup_file
, int verbose
)
2944 unsigned long long *offsets
;
2945 unsigned long long nstripe
, ostripe
;
2948 if (info
->new_level
!= info
->array
.level
)
2949 return 1; /* Cannot handle level changes (they are instantaneous) */
2951 odata
= info
->array
.raid_disks
- info
->delta_disks
- 1;
2952 if (info
->array
.level
== 6) odata
--; /* number of data disks */
2953 ndata
= info
->array
.raid_disks
- 1;
2954 if (info
->new_level
== 6) ndata
--;
2956 old_disks
= info
->array
.raid_disks
- info
->delta_disks
;
2958 if (info
->delta_disks
<= 0)
2959 /* Didn't grow, so the backup file must have
2963 for (i
=old_disks
-(backup_file
?1:0); i
<cnt
; i
++) {
2964 struct mdinfo dinfo
;
2967 char *devname
, namebuf
[20];
2968 unsigned long long lo
, hi
;
2970 /* This was a spare and may have some saved data on it.
2971 * Load the superblock, find and load the
2972 * backup_super_block.
2973 * If either fail, go on to next device.
2974 * If the backup contains no new info, just return
2975 * else restore data and update all superblocks
2977 if (i
== old_disks
-1) {
2978 fd
= open(backup_file
, O_RDONLY
);
2980 fprintf(stderr
, Name
": backup file %s inaccessible: %s\n",
2981 backup_file
, strerror(errno
));
2984 devname
= backup_file
;
2989 if (st
->ss
->load_super(st
, fd
, NULL
))
2992 st
->ss
->getinfo_super(st
, &dinfo
, NULL
);
2993 st
->ss
->free_super(st
);
2996 (dinfo
.data_offset
+ dinfo
.component_size
- 8) <<9,
2998 fprintf(stderr
, Name
": Cannot seek on device %d\n", i
);
2999 continue; /* Cannot seek */
3001 sprintf(namebuf
, "device-%d", i
);
3004 if (read(fd
, &bsb
, sizeof(bsb
)) != sizeof(bsb
)) {
3006 fprintf(stderr
, Name
": Cannot read from %s\n", devname
);
3007 continue; /* Cannot read */
3009 if (memcmp(bsb
.magic
, "md_backup_data-1", 16) != 0 &&
3010 memcmp(bsb
.magic
, "md_backup_data-2", 16) != 0) {
3012 fprintf(stderr
, Name
": No backup metadata on %s\n", devname
);
3015 if (bsb
.sb_csum
!= bsb_csum((char*)&bsb
, ((char*)&bsb
.sb_csum
)-((char*)&bsb
))) {
3017 fprintf(stderr
, Name
": Bad backup-metadata checksum on %s\n", devname
);
3018 continue; /* bad checksum */
3020 if (memcmp(bsb
.magic
, "md_backup_data-2", 16) == 0 &&
3021 bsb
.sb_csum2
!= bsb_csum((char*)&bsb
, ((char*)&bsb
.sb_csum2
)-((char*)&bsb
))) {
3023 fprintf(stderr
, Name
": Bad backup-metadata checksum2 on %s\n", devname
);
3024 continue; /* Bad second checksum */
3026 if (memcmp(bsb
.set_uuid
,info
->uuid
, 16) != 0) {
3028 fprintf(stderr
, Name
": Wrong uuid on backup-metadata on %s\n", devname
);
3029 continue; /* Wrong uuid */
3032 /* array utime and backup-mtime should be updated at much the same time, but it seems that
3033 * sometimes they aren't... So allow considerable flexability in matching, and allow
3034 * this test to be overridden by an environment variable.
3036 if (info
->array
.utime
> (int)__le64_to_cpu(bsb
.mtime
) + 2*60*60 ||
3037 info
->array
.utime
< (int)__le64_to_cpu(bsb
.mtime
) - 10*60) {
3038 if (check_env("MDADM_GROW_ALLOW_OLD")) {
3039 fprintf(stderr
, Name
": accepting backup with timestamp %lu "
3040 "for array with timestamp %lu\n",
3041 (unsigned long)__le64_to_cpu(bsb
.mtime
),
3042 (unsigned long)info
->array
.utime
);
3045 fprintf(stderr
, Name
": too-old timestamp on "
3046 "backup-metadata on %s\n", devname
);
3047 continue; /* time stamp is too bad */
3051 if (bsb
.magic
[15] == '1') {
3052 if (bsb
.length
== 0)
3054 if (info
->delta_disks
>= 0) {
3055 /* reshape_progress is increasing */
3056 if (__le64_to_cpu(bsb
.arraystart
)
3057 + __le64_to_cpu(bsb
.length
)
3058 < info
->reshape_progress
) {
3061 fprintf(stderr
, Name
3062 ": backup-metadata found on %s but is not needed\n", devname
);
3063 continue; /* No new data here */
3066 /* reshape_progress is decreasing */
3067 if (__le64_to_cpu(bsb
.arraystart
) >=
3068 info
->reshape_progress
)
3069 goto nonew
; /* No new data here */
3072 if (bsb
.length
== 0 && bsb
.length2
== 0)
3074 if (info
->delta_disks
>= 0) {
3075 /* reshape_progress is increasing */
3076 if ((__le64_to_cpu(bsb
.arraystart
)
3077 + __le64_to_cpu(bsb
.length
)
3078 < info
->reshape_progress
)
3080 (__le64_to_cpu(bsb
.arraystart2
)
3081 + __le64_to_cpu(bsb
.length2
)
3082 < info
->reshape_progress
))
3083 goto nonew
; /* No new data here */
3085 /* reshape_progress is decreasing */
3086 if (__le64_to_cpu(bsb
.arraystart
) >=
3087 info
->reshape_progress
&&
3088 __le64_to_cpu(bsb
.arraystart2
) >=
3089 info
->reshape_progress
)
3090 goto nonew
; /* No new data here */
3093 if (lseek64(fd
, __le64_to_cpu(bsb
.devstart
)*512, 0)< 0) {
3096 fprintf(stderr
, Name
3097 ": Failed to verify secondary backup-metadata block on %s\n",
3099 continue; /* Cannot seek */
3101 /* There should be a duplicate backup superblock 4k before here */
3102 if (lseek64(fd
, -4096, 1) < 0 ||
3103 read(fd
, &bsb2
, sizeof(bsb2
)) != sizeof(bsb2
))
3104 goto second_fail
; /* Cannot find leading superblock */
3105 if (bsb
.magic
[15] == '1')
3106 bsbsize
= offsetof(struct mdp_backup_super
, pad1
);
3108 bsbsize
= offsetof(struct mdp_backup_super
, pad
);
3109 if (memcmp(&bsb2
, &bsb
, bsbsize
) != 0)
3110 goto second_fail
; /* Cannot find leading superblock */
3112 /* Now need the data offsets for all devices. */
3113 offsets
= malloc(sizeof(*offsets
)*info
->array
.raid_disks
);
3114 for(j
=0; j
<info
->array
.raid_disks
; j
++) {
3117 if (st
->ss
->load_super(st
, fdlist
[j
], NULL
))
3118 /* FIXME should be this be an error */
3120 st
->ss
->getinfo_super(st
, &dinfo
, NULL
);
3121 st
->ss
->free_super(st
);
3122 offsets
[j
] = dinfo
.data_offset
* 512;
3124 printf(Name
": restoring critical section\n");
3126 if (restore_stripes(fdlist
, offsets
,
3127 info
->array
.raid_disks
,
3131 fd
, __le64_to_cpu(bsb
.devstart
)*512,
3132 __le64_to_cpu(bsb
.arraystart
)*512,
3133 __le64_to_cpu(bsb
.length
)*512)) {
3134 /* didn't succeed, so giveup */
3136 fprintf(stderr
, Name
": Error restoring backup from %s\n",
3141 if (bsb
.magic
[15] == '2' &&
3142 restore_stripes(fdlist
, offsets
,
3143 info
->array
.raid_disks
,
3147 fd
, __le64_to_cpu(bsb
.devstart
)*512 +
3148 __le64_to_cpu(bsb
.devstart2
)*512,
3149 __le64_to_cpu(bsb
.arraystart2
)*512,
3150 __le64_to_cpu(bsb
.length2
)*512)) {
3151 /* didn't succeed, so giveup */
3153 fprintf(stderr
, Name
": Error restoring second backup from %s\n",
3159 /* Ok, so the data is restored. Let's update those superblocks. */
3163 lo
= __le64_to_cpu(bsb
.arraystart
);
3164 hi
= lo
+ __le64_to_cpu(bsb
.length
);
3166 if (bsb
.magic
[15] == '2' && bsb
.length2
) {
3167 unsigned long long lo1
, hi1
;
3168 lo1
= __le64_to_cpu(bsb
.arraystart2
);
3169 hi1
= lo1
+ __le64_to_cpu(bsb
.length2
);
3173 } else if (lo
< lo1
)
3179 (info
->reshape_progress
< lo
||
3180 info
->reshape_progress
> hi
))
3181 /* backup does not affect reshape_progress*/ ;
3182 else if (info
->delta_disks
>= 0) {
3183 info
->reshape_progress
= __le64_to_cpu(bsb
.arraystart
) +
3184 __le64_to_cpu(bsb
.length
);
3185 if (bsb
.magic
[15] == '2') {
3186 unsigned long long p2
= __le64_to_cpu(bsb
.arraystart2
) +
3187 __le64_to_cpu(bsb
.length2
);
3188 if (p2
> info
->reshape_progress
)
3189 info
->reshape_progress
= p2
;
3192 info
->reshape_progress
= __le64_to_cpu(bsb
.arraystart
);
3193 if (bsb
.magic
[15] == '2') {
3194 unsigned long long p2
= __le64_to_cpu(bsb
.arraystart2
);
3195 if (p2
< info
->reshape_progress
)
3196 info
->reshape_progress
= p2
;
3199 for (j
=0; j
<info
->array
.raid_disks
; j
++) {
3200 if (fdlist
[j
] < 0) continue;
3201 if (st
->ss
->load_super(st
, fdlist
[j
], NULL
))
3203 st
->ss
->getinfo_super(st
, &dinfo
, NULL
);
3204 dinfo
.reshape_progress
= info
->reshape_progress
;
3205 st
->ss
->update_super(st
, &dinfo
,
3206 "_reshape_progress",
3208 st
->ss
->store_super(st
, fdlist
[j
]);
3209 st
->ss
->free_super(st
);
3213 /* Didn't find any backup data, try to see if any
3216 if (info
->delta_disks
< 0) {
3217 /* When shrinking, the critical section is at the end.
3218 * So see if we are before the critical section.
3220 unsigned long long first_block
;
3221 nstripe
= ostripe
= 0;
3223 while (ostripe
>= nstripe
) {
3224 ostripe
+= info
->array
.chunk_size
/ 512;
3225 first_block
= ostripe
* odata
;
3226 nstripe
= first_block
/ ndata
/ (info
->new_chunk
/512) *
3227 (info
->new_chunk
/512);
3230 if (info
->reshape_progress
>= first_block
)
3233 if (info
->delta_disks
> 0) {
3234 /* See if we are beyond the critical section. */
3235 unsigned long long last_block
;
3236 nstripe
= ostripe
= 0;
3238 while (nstripe
>= ostripe
) {
3239 nstripe
+= info
->new_chunk
/ 512;
3240 last_block
= nstripe
* ndata
;
3241 ostripe
= last_block
/ odata
/ (info
->array
.chunk_size
/512) *
3242 (info
->array
.chunk_size
/512);
3245 if (info
->reshape_progress
>= last_block
)
3248 /* needed to recover critical section! */
3250 fprintf(stderr
, Name
": Failed to find backup of critical section\n");
3254 int Grow_continue(int mdfd
, struct supertype
*st
, struct mdinfo
*info
,
3257 int err
= sysfs_set_str(info
, NULL
, "array_state", "readonly");
3260 return reshape_array(NULL
, mdfd
, "array", st
, info
, 1, backup_file
, 0, 0, 1);