Kinga Tanska [Tue, 10 Dec 2019 11:21:21 +0000 (12:21 +0100)]
Change warning message
In commit 039b7225e6 ("md: allow creation of mdNNN arrays via
md_mod/parameters/new_array") support for name like mdNNN
was added. Special warning, when kernel is unable to handle
request, was added in commit 7105228e19
("mdadm/mdopen: create new function create_named_array for
writing to new_array"), but it was not adequate enough,
because in this situation mdadm tries to do it in old way.
This commit changes warning to be more relevant when
creating RAID container with "/dev/mdNNN" name and mdadm
back to old approach.
dann frazier [Mon, 9 Dec 2019 20:54:13 +0000 (13:54 -0700)]
Respect $(CROSS_COMPILE) when $(CC) is the default
Commit 1180ed5 told make to only respect $(CROSS_COMPILE) when $(CC)
was unset. But that will never be the case, as make provides
a default value for $(CC). Change this logic to respect $(CROSS_COMPILE)
when $(CC) is the default. Patch originally by Helmet Grohne.
Fixes: 1180ed5 ("Makefile: make the CC definition conditional") Signed-off-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: Jes Sorensen <jsorensen@fb.com>
NeilBrown [Mon, 4 Nov 2019 03:27:49 +0000 (14:27 +1100)]
Assemble: add support for RAID0 layouts.
If you have a RAID0 array with varying sized devices
on a kernel before 5.4, you cannot assembling it on
5.4 or later without explicitly setting the layout.
This is now possible with
--update=layout-original (For 3.13 and earlier kernels)
or
--update=layout-alternate (for 3.14 and later kernels)
NeilBrown [Mon, 4 Nov 2019 03:27:49 +0000 (14:27 +1100)]
Create: add support for RAID0 layouts.
Since Linux 5.4 a layout is needed for RAID0 arrays with
varying device sizes.
This patch makes the layout of an array visible (via --examine)
and sets the layout on newly created arrays.
--layout=dangerous
can be used to avoid setting a layout so that they array
can be used on older kernels.
Blazej Kucman [Mon, 2 Dec 2019 09:52:05 +0000 (10:52 +0100)]
imsm: Change the way of printing nvme drives in detail-platform.
Change NVMe controller path to device node path
in mdadm --detail-platform and print serial number.
The method imsm_read_serial always trimes serial to
MAX_RAID_SERIAL_LEN, added parameter 'serial_buf_len'
will be used to check the serial fit
to passed buffor, if not, will be trimed.
Blazej Kucman [Fri, 29 Nov 2019 14:21:08 +0000 (15:21 +0100)]
imsm: return correct uuid for volume in detail
Fixes the side effect of the patch b6180160f ("imsm: save current_vol number")
- wrong UUID is printed in detail for each volume.
New parameter "subarray" is added to determine what info should be extracted
from metadata (subarray or container).
The parameter affects only IMSM metadata.
Xiao Yang [Wed, 27 Nov 2019 03:59:24 +0000 (11:59 +0800)]
Manage: Remove the legacy code for md driver prior to 0.90.03
Previous re-add operation only calls ioctl(HOT_ADD_DISK) for array without
metadata(e.g. mdadm -B/--build) when md driver is less than 0.90.02, but
commit 091e8e6 breaks the logic and current re-add operation can call
ioctl(HOT_ADD_DISK) even if md driver is 0.90.03.
This issue is reproduced by 05r1-re-add-nosuper:
------------------------------------------------
++ die 'resync or recovery is happening!'
++ echo -e '\n\tERROR: resync or recovery is happening! \n'
ERROR: resync or recovery is happening!
------------------------------------------------
Fixes: 091e8e6("Manage: Remove all references to md_get_version()") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Xiao Yang <ice_yangxiao@163.com> Signed-off-by: Jes Sorensen <jsorensen@fb.com>
NeilBrown [Thu, 31 Oct 2019 04:15:38 +0000 (15:15 +1100)]
super-intel: don't mark structs 'packed' unnecessarily
super-intel marks a number of structures 'packed', but this
doesn't change the layout - they are already well organized.
This is a problem a gcc warns when code takes the address
of a field in a packet struct - as super-intel sometimes does.
So remove the marking where isn't needed.
Do ensure this does introduce a regression, add a compile-time
assertion that the size of the structure is exactly the value
it had before the 'packed' notation was removed.
Note that a couple of structure do need to be packed.
As the address of fields is never taken, that is safe.
NeilBrown [Tue, 29 Oct 2019 23:32:41 +0000 (10:32 +1100)]
mdcheck: use ${} to pass variable to mdcheck
$MDADM_CHECK_DURATION allows the value to be split on spaces.
${MDADM_CHECK_DURATION} avoids such splitting.
Making this change removes the need for double quoting when setting
the default Environment, and means that double quoting isn't needed
in the EnvironmentFile.
NeilBrown [Tue, 29 Oct 2019 23:32:41 +0000 (10:32 +1100)]
mdcheck: when mdcheck_start is enabled, enable mdcheck_continue too.
mdcheck_continue continues a regular array scan that was started by
mdcheck_start.
mdcheck_start will ensure that mdcheck_continue is active.
Howver if you reboot after a check has started, but before it finishes,
then mdcheck_continue won't cause it to continue, because nothing
starts it on boot.
So add an install option for mdcheck_contine, and make sure it
gets enabled when mdcheck_start is enabled.
Removed checks which limited second volume size only to max value (the
largest size that fits on all current drives). It is now permitted
to create second volume with size lower then maximum possible.
Signed-off-by: Krzysztof Smolinski <krzysztof.smolinski@intel.com> Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Mariusz Tkaczyk [Fri, 4 Oct 2019 10:07:28 +0000 (12:07 +0200)]
imsm: save current_vol number
The imsm container_content routine will set curr_volume index in super
for getting volume information. This flag has never been restored to
original value, later other function may rely on it.
There is a bug in udev (which will hopefully get fixed, but
we should allow for it anways).
When reading a sysfs attribute, it first reads the whole
value of the attribute, then reads again expecting to get
a read of 0 bytes, like you would with an ordinary file.
If the sysfs attribute changed between these two reads, it can
get a mixture of two values.
In particular, if it reads when 'array_state' is changing from
'clear' to 'inactive', it can find the value as "clear\nve".
This causes the test for "|clear|active" to fail, so systemd is allowed
to think that the array is ready - when it isn't.
So change the pattern to allow for this but adding a wildcard at
the end.
Also don't allow for an empty string - reading array_state will
never return an empty string - if it exists at all, it will be
non-empty.
Xiao Ni [Mon, 30 Sep 2019 11:47:59 +0000 (19:47 +0800)]
Init devlist as an array
devlist is an string. It will change to an array if there is disk that
is sbd disk. If one device is sbd, it runs devlist=().
This line code changes devlist from a string to an array. If there is
no sbd device, it can't run this line code. So it will still be a string.
The later codes need an array, rather than an string. So init devlist
as an array to fix this problem.
Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Jes Sorensen <jsorensen@fb.com>
The code path for metadata 0.90 calls a common routine
fname_from_uuid that uses metadata 1.2. The code expects member
swapuuid to be setup and usable. But it is only setup when using
metadata 1.2. Since the metadata 0.90 did not create swapuuid
and set it. The test (st->ss == &super1) ? 1 : st->ss->swapuuid
fails. The swapuuid is set at compile time based on byte order.
Any call based on metadata 0.90 and on big endian processors,
the --export uuid will be incorrect.
mdadm: Introduce new array state 'broken' for raid0/linear
Currently if a md raid0/linear array gets one or more members removed while
being mounted, kernel keeps showing state 'clean' in the 'array_state'
sysfs attribute. Despite udev signaling the member device is gone, 'mdadm'
cannot issue the STOP_ARRAY ioctl successfully, given the array is mounted.
Nothing else hints that something is wrong (except that the removed devices
don't show properly in the output of mdadm 'detail' command). There is no
other property to be checked, and if user is not performing reads/writes
to the array, even kernel log is quiet and doesn't give a clue about the
missing member.
This patch is the mdadm counterpart of kernel new array state 'broken'.
The 'broken' state mimics the state 'clean' in every aspect, being useful
only to distinguish if an array has some member missing. All necessary
paths in mdadm were changed to deal with 'broken' state, and in case the
tool runs in a kernel that is not updated, it'll work normally, i.e., it
doesn't require the 'broken' state in order to work.
Also, this patch changes the way the array state is showed in the 'detail'
command (for raid0/linear only) - now it takes the 'array_state' sysfs
attribute into account instead of only rely in the MD_SB_CLEAN flag.
Cc: Jes Sorensen <jes.sorensen@gmail.com> Cc: NeilBrown <neilb@suse.de> Cc: Song Liu <songliubraving@fb.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com> Signed-off-by: Jes Sorensen <jsorensen@fb.com>
mdadm: check value returned by snprintf against errors
GCC 8 checks possible truncation during snprintf more strictly
than GCC 7 which result in compilation errors. To fix this
problem checking result of snprintf against errors has been added.
Signed-off-by: Krzysztof Smolinski <krzysztof.smolinski@intel.com> Signed-off-by: Jes Sorensen <jsorensen@fb.com>
When member drive fails, managemon prepares metadata update and adds
the drive to disk_mgmt_list with DISK_REMOVE flag. It fills only
minor and major. It is enough to recognize the device later.
Monitor thread while processing this update will remove the drive from
super only if it is a spare. It never removes failed member from
disks list. As a result, it still keeps opened descriptor to
non-existing device.
If removed drive is not a spare fill fd in disk_cfg structure
(prepared by managemon), monitor will close fd during freeing it.
Also set this drive fd to -1 in super to avoid double closing because
monitor will close the fd (if needed) while replacing removed drive
in array.
Coly Li [Wed, 31 Jul 2019 05:29:30 +0000 (13:29 +0800)]
udev: add --no-devices option for calling 'mdadm --detail'
When creating symlink of a md raid device, the detailed information of
component disks are unnecessary for rule udev-md-raid-arrays.rules. For
md raid devices with huge number of component disks (e.g. 1500 DASD
disks), the detail information of component devices can be very large
and exceed udev monitor's on-stack message buffer.
This patch adds '--no-devices' option when calling mdadm by,
IMPORT{program}="BINDIR/mdadm --detail --no-devices --export $devnode"
Now the detailed output won't include component disks information,
and the error message "invalid message length" reported by systemd can
be removed.
Coly Li [Wed, 31 Jul 2019 05:29:29 +0000 (13:29 +0800)]
mdadm: add --no-devices to avoid component devices detail information
When people assemble a md raid device with a large number of
component deivces (e.g. 1500 DASD disks), the raid device detail
information generated by 'mdadm --detail --export $devnode' is very
large. It is because the detail information contains information of
all the component disks (even the missing/failed ones).
In such condition, when udev-md-raid-arrays.rules is triggered and
internally calls "mdadm --detail --no-devices --export $devnode",
user may observe systemd error message ""invalid message length". It
is because the following on-stack raw message buffer in systemd code
is not big enough,
systemd/src/libudev/libudev-monitor.c
_public_ struct udev_device *udev_monito ...
struct ucred *cred;
union {
struct udev_monitor_netlink_header nlh;
char raw[8192];
} buf;
Even change size of raw[] from 8KB to larger size, it may still be not
enough for detail message of a md raid device with much larger number of
component devices.
To fix this problem, an extra option '--no-devices' is added (the
original idea is proposed by Neil Brown). When printing detailed
information of a md raid device, if '--no-devices' is specified, then
all component devices information will not be printed, then the output
message size can be restricted to a small number, even with the systemd
only has 8KB on-disk raw buffer, the md raid array udev rules can work
correctly without failure message.
Baruch Siach [Tue, 6 Aug 2019 13:05:23 +0000 (16:05 +0300)]
mdadm.h: include sysmacros.h unconditionally
musl libc now also requires sys/sysmacros.h for the major/minor macros.
All supported libc implementations carry sys/sysmacros.h, including
diet-libc, klibc, and uclibc-ng.
mdadm: load default sysfs attributes after assemblation
Added new type of line to mdadm.conf which allows to specify values of
sysfs attributes for MD devices that should be loaded after the array is
assembled. Each line is interpreted as list of structures containing
sysname of MD device (md126 etc.) and list of sysfs attributes and their
values.
Roman Sobanski [Tue, 2 Jul 2019 11:29:27 +0000 (13:29 +0200)]
Enable probe_roms to scan more than 6 roms.
In some cases if more than 6 oroms exist, resource for particular
controller may not be found. Change method for storing
adapter_rom_resources from array to list.
Signed-off-by: Roman Sobanski <roman.sobanski@intel.com> Signed-off-by: Jes Sorensen <jsorensen@fb.com>
mdmon: fix wrong array state when disk fails during mdmon startup
If a member drive disappears and is set faulty by the kernel during
mdmon startup, after ss->load_container() but before manage_new(), mdmon
will try to readd the faulty drive to the array and start rebuilding.
Metadata on the active drive is updated, but the faulty drive is not
removed from the array and is left in a "blocked" state and any write
request to the array will block. If the faulty drive reappears in the
system e.g. after a reboot, the array will not assemble because metadata
on the drives will be incompatible (at least on imsm).
Fix this by adding a new option for sysfs_read(): "GET_DEVS_ALL". This
is an extension for the "GET_DEVS" option and causes all member devices
to be returned, even if the associated block device has been removed.
Use this option in manage_new() to include the faulty device on the
active_array's devices list. Mdmon will then properly remove the faulty
device from the array and update the metadata to reflect the degraded
state.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by: Jes Sorensen <jsorensen@fb.com>
When passed size is smaller than chunk, mdadm rounds it to 0 but 0 there
means max available space.
Block it for every metadata. Remove the same check from imsm routine.
Pawel Baldysiak [Fri, 8 Mar 2019 11:19:11 +0000 (12:19 +0100)]
imsm: fix spare activation for old matrix arrays
During spare activation get_extents() calculates metadata reserved space based
on smallest active RAID member or it will take the defaults. Since patch 611d9529("imsm: change reserved space to 4MB") default is extended. If array
was created prior that patch, reserved space is smaller. In case of matrix
RAID - spare is activated in each array one-by-one, so it is spare for first
activation, but treated as "active" during second one.
In case of adding spare drive to old matrix RAID with the size the same as
already existing member drive the routine will take the defaults during second
run and mdmon will refuse to rebuild second volume, claiming that the drive
does not have enough free space.
Add parameter to get_extents(), so the during spare activation reserved space
is always based on smallest active drive - even if given drive is already
active in some other array of matrix RAID.
Pawel Baldysiak [Fri, 22 Feb 2019 11:56:27 +0000 (12:56 +0100)]
Assemble: Fix starting array with initial reshape checkpoint
If array was stopped during reshape initialization,
there might be a "0" checkpoint recorded in metadata.
If array with such condition (reshape with position 0)
is passed to kernel - it will refuse to start such array.
Treat such array as normal during assemble, Grow_continue() will
reinitialize and start the reshape.
Pawel Baldysiak [Fri, 22 Feb 2019 12:30:27 +0000 (13:30 +0100)]
mdmon: wait for previous mdmon to exit during takeover
Since the patch c76242c5("mdmon: get safe mode delay file descriptor
early"), safe_mode_dalay is set properly by initrd mdmon. But in some
cases with filesystem traffic since the very start of the system, it
might take a while to transit to clean state. Due to fact that new
mdmon does not wait for the old one to exit - it might happen that the
new one switches safe_mode_delay back to seconds, before old one exits.
As the result two mdmons are running concurrently on same array.
Wait for the old mdmon to exit by pinging it with SIGUSR1 signal, just
in case it is sleeping.
mdmon: don't attempt to manage new arrays when terminating
When mdmon gets a SIGTERM, it stops managing arrays that are clean. If
there is more that one array in the container and one of them is dirty
and the clean one is still present in mdstat, mdmon will treat it as a
new array and start managing it again. This leads to a cycle of
remove_old() / manage_new() calls for the clean array, until the other
one also becomes clean.
Prevent this by not calling manage_new() if sigterm is set. Also, remove
a check for sigterm in manage_new() because the condition will never be
true.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Gioh Kim [Fri, 7 Dec 2018 13:30:09 +0000 (14:30 +0100)]
mdadm/tests: add one test case for failfast of raid1
This creates raid1 device with the failfast option and check all
slaves have the failfast flag. And it does assembling and growing
the raid1 device and check the failfast works fine.
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com> Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Corey Hickey [Tue, 12 Feb 2019 01:18:38 +0000 (17:18 -0800)]
Fix reshape for decreasing data offset
...when not changing the number of disks.
This patch needs context to explain. These are the relevant parts of
the original code (condensed and annotated):
if (dir > 0) {
/* Increase data offset (reshape backwards) */
if (data_offset < sd->data_offset + min) {
pr_err("--data-offset too small on %s\n",
dn);
goto release;
}
} else {
/* Decrease data offset (reshape forwards) */
if (data_offset < sd->data_offset - min) {
pr_err("--data-offset too small on %s\n",
dn);
goto release;
}
}
When this code is reached, mdadm has already decided on a reshape
direction. When increasing the data offset, the reshape runs backwards
(dir==1); when decreasing the data offset, the reshape runs forwards
(dir==-1).
The conditional within the backwards reshape is correct: the requested
offset must be larger than the old offset plus a minimum delta; thus the
reshape has room to work.
For the forwards reshape, the requested offset needs to be smaller than
the old offset minus a minimum delta; to do this correctly, the
comparison must be reversed.
Also update the error message.
Note: I have tested this change on a RAID 5 on Linux 4.18.0 and verified
that there were no errors from the kernel and that the device data
remained intact. I do not know if there are considerations for different
RAID levels.
Coly Li [Tue, 12 Feb 2019 04:53:18 +0000 (12:53 +0800)]
Detail.c: do not skip first character when calling xstrdup in Detail()
'Commit b9c9bd9bacaa ("Detail: ensure --export names are acceptable as
shell variables")' duplicates mdi->sys_name to sysdev string by,
char *sysdev = xstrdup(mdi->sys_name + 1);
which skips the first character of mdi->sys_name. Then when running
mdadm --detail <md device> --export, the output looks like,
MD_DEVICE_ev_sda2_ROLE=1
MD_DEVICE_ev_sda2_DEV=/dev/sda2
The first character of md device (between MD_DEVICE and _ROLE/_DEV)
is dropped. The expected output should be,
MD_DEVICE_dev_sda2_ROLE=1
MD_DEVICE_dev_sda2_DEV=/dev/sda2
This patch removes the '+ 1' from calling xstrdup() in Detail(), which
gets the dropped first character back.
Reported-by: Arvin Schnell <aschnell@suse.com> Fixes: b9c9bd9bacaa ("Detail: ensure --export names are acceptable as 4 shell variables") Signed-off-by: Coly Li <colyli@suse.de> Cc: NeilBrown <neilb@suse.com> Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Pawel Baldysiak [Mon, 28 Jan 2019 16:10:41 +0000 (17:10 +0100)]
imsm: fix reshape for >2TB drives
If reshape is performed on drives larger then 2 TB,
migration checkpoint area that is calculated exeeds 32-bit value.
This checkpoint area is a reserved space threated as backup
during reshape - at the end of the drive, right before metadata.
As a result - wrong space is used and the data that may exists there
is overwritten.
Adding additional field to migration record to track high order 32-bits
of pba of this area. Three other fields that may exceed 32-bit value
for large drives are added as well.
Mariusz Tkaczyk [Fri, 8 Feb 2019 10:07:10 +0000 (11:07 +0100)]
imsm: finish recovery when drive with rebuild fails
Commit d7a1fda2769b ("imsm: update metadata correctly while raid10 double
degradation") resolves main Imsm double degradation problems but it
omits one case. Now metadata hangs in the rebuilding state if the drive
under rebuild is removed during recovery from double degradation.
The root cause of this problem is comparing new map_state with current
and if they both are degraded assuming that nothing new happens.
Don't rely on map states, just check if device is failed. If the drive
under rebuild fails then finish migration, in other cases update map
state only (second fail means that destination map state can't be normal).
To avoid problems with reassembling move end_migration (called after
double degradation successful recovery) after check if recovery really
finished, for details see (7ce057018 "imsm: fix: rebuild does not
continue after reboot").
Remove redundant code responsible for finishing rebuild process. Function
end_migration do exactly the same. Set last_checkpoint to 0, to prepare
it for the next rebuild.
Mariusz Tkaczyk [Tue, 11 Dec 2018 14:04:07 +0000 (15:04 +0100)]
policy.c: Fix for compiler error
After cd72f9d(policy: support devices with multiple paths.) compilation
on old compilers fails because "‘p’ may be used uninitialized
in this function".
NeilBrown [Wed, 5 Dec 2018 23:35:41 +0000 (10:35 +1100)]
Grow: avoid overflow in compute_backup_blocks()
With a chunk size of 16Meg and data drive count of 8,
this calculate can easily overflow the 'int' type that
is used for the multiplications.
So force it to use "long" instead.
Gioh Kim [Tue, 6 Nov 2018 15:20:17 +0000 (16:20 +0100)]
Assemble: mask FAILFAST and WRITEMOSTLY flags when finding the most recent device
If devices[].i.disk.state has MD_DISK_FAILFAST or MD_DISK_WRITEMOSTLY
flag, it cannot be the most recent device. Both flags should be masked
before checking the state.
Mariusz Tkaczyk [Wed, 17 Oct 2018 10:11:41 +0000 (12:11 +0200)]
imsm: update metadata correctly while raid10 double degradation
Mdmon calls end_migration() when map state changes from normal to
degraded. It is not valid because in raid 10 double degradation case
mdmon breaks checkpointing but array is still rebuilding.
In this case mdmon has to mark map as degraded and continues marking
recovery checkpoint in metadata. Migration can be finished only if newly
failed device is a rebuilding device.
Add catching double degraded to degraded transition. Migration is
finished but map state doesn't change, array is still degraded.
Update failed_disk_num correctly. If double degradation
happens rebuild will start on the lowest slot, but this variable points
to the first failed slot. If second fail happens while rebuild this
variable shouldn't be updated until rebuild is not finished.
NeilBrown [Wed, 5 Dec 2018 05:35:00 +0000 (16:35 +1100)]
Monitor: add system timer to run --oneshot periodically
"mdadm --monitor --oneshot" can be used to get a warning
if there are any degraded arrays. It can be helpful to get
this warning periodically while the condition persists.
This patch add a systemd service and timer which can
be enabled with
systemctl enable mdmonitor-oneshot.service
NeilBrown [Wed, 5 Dec 2018 05:35:00 +0000 (16:35 +1100)]
mdcheck: add systemd unit files to run mdcheck.
Having the mdcheck script is not use if is never run.
This patch adds systemd unit files so that it can easily
be run on the first Sunday of each month for 6 hours,
then on every subsequent morning until the check is
finished.
The units still need to be enabled with
systemctl enable mdcheck_start.timer
The timer will only actually be started when an array
which might need it becomes active.
NeilBrown [Fri, 9 Nov 2018 06:12:33 +0000 (17:12 +1100)]
policy: support devices with multiple paths.
As new releases of Linux some time change the name of
a path, some distros keep "legacy" names as well. This
is useful, but confuses mdadm which assumes each device has
precisely one path.
So change this assumption: allow a disk to have several
paths, and allow any to match when looking for a policy
which matches a disk.
NeilBrown [Fri, 9 Nov 2018 06:12:33 +0000 (17:12 +1100)]
Document PART-POLICY lines
PART-POLICY has been accepted in mdadm.conf since the same
time that POLICY was accepted, but it was never documented.
So add the missing documentation.
Also fix a bug which would have stopped it from working if
anyone had ever tried to use it.
Gioh Kim [Tue, 6 Nov 2018 14:27:42 +0000 (15:27 +0100)]
Assemble: keep MD_DISK_FAILFAST and MD_DISK_WRITEMOSTLY flag
Before updating superblock of slave disks, desired_state value
is set for the target state of the slave disks. But it forgets
to check MD_DISK_FAILFAST and MD_DISK_WRITEMOSTLY flags. Then
start_arrays() calls ADD_NEW_DISK ioctl-call and pass the state
without MD_DISK_FAILFAST and MD_DISK_WRITEMOSTLY.
Currenlty it does not generate any problem because kernel does not
care MD_DISK_FAILFAST or MD_DISK_WRITEMOSTLY flags.
When IMSM_NO_PLATFORM is exported mdadm allows to create array with
partitions or add partition to existing array but there is no
possibilty to assemble it after stopping, see commit 691c6ee1b6bb
("IMSM/DDF: don't recognised these metadata on partitions.").
When searching for hba capabilities first test device and print
corresponding error if it is a partition.
Guoqing Jiang [Mon, 27 Aug 2018 03:10:52 +0000 (11:10 +0800)]
Assemble: set devices to NULL when load_devices can't load device
Since load_devices frees "devices" when it can't find any
device, we should set it to NULL to avoid double free issue
which can be reproduced by below steps:
When Kill() cannot open device or find superblock it return the same
error and mdadm ignores it.
Change error handling in Kill() function. Return error if device is
busy, ignore it only when superblock doesn't exist- assume that metadata
is zeroed.
Mariusz Tkaczyk [Fri, 3 Aug 2018 07:41:50 +0000 (09:41 +0200)]
Incremental: remove external arrays and devices correctly
Kernel returns EBUSY when device fail invokes array fail.
In external metadata if kernel returns it, mdadm doesn't stop member
arrays but it will try to stop container directly. It fails because
container still has working arrays, so udev remove is triggered.
Try to set faulty state on device in member arrays first. If kernel
returns EBUSY, stop this array. After that remove the device from
container.
In external metadata mdmon has to remove faulty devices from degraded
arrays, just remove device from container.
Raid5 array doesn't return EBUSY, it allows to remove every device.
Mdadm shouldn't block it.
udev.rules: make safe timeouts compatible with split-usr systems.
Instead of /usr/bin/sh, and /usr/bin/echo, use /bin/sh and shell
built-in echo respectively. This makes
udev-md-raid-safe-timeouts.rules to be compatible with both usr-merged
and split-usr systems alike.
Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com> Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Sometimes node can't assemble array because all the nodes
need to contend dlm lock, which causes node fence in automatic
test.
And in fact, we don't need the protection since the assemble
cmd called by RA doesn't change superblock, so revert the
commit 76781701a487090172d32befae07671a10ea88ad ("Assemble:
provide protection when clustered raid do assemble") to remove
unneccessary protection.
It is caused by Manage_stop calls map_remove and map_unlock,
but *mapp is not set to NULL after map_remove -> map_free,
so map_unlock will call map_free again.
Michal Zylowski [Fri, 22 Jun 2018 14:34:12 +0000 (16:34 +0200)]
tests, imsm: Calculate expected array_size in proper way
Tests should calucalte expected array_size accordingly to raid level. Also
tests should take care about runding to neares MB introduced from b53bfba6
"imsm: use rounded size for metadata initialization".
Expect proper size in tests. Simplify 09imsm-overlap test by creating array
with size which has not been rounded. Main purpose of this test is checking
something else.
Signed-off-by: Michal Zylowski <michal.zylowski@intel.com> Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Michal Zylowski [Fri, 22 Jun 2018 14:34:10 +0000 (16:34 +0200)]
tests, imsm: Test shouldn't call grow with chunk and level in one command
Since a3b831c9 "Grow.c: Block any level migration with chunk size change"
there is no possibility to perform migration between level and chunk in
one operation. When any test tries to do this error message is printed
and tests finishes with fail.
Signed-off-by: Michal Zylowski <michal.zylowski@intel.com> Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Michal Zylowski [Fri, 22 Jun 2018 14:34:09 +0000 (16:34 +0200)]
tests, imsm: Set new_num_disks value corectly to perform expected size calculations
In some migration tests, variable new_num_disks should be set to expected
number of disks after migration. This is required for proper expected size
calculation.
Pass new_num_disks variable during test execution for:
- 16imsm-r0_3d-migrate-r5_4d
- 18imsm-r1_2d-takeover-r0_1d
- 16imsm-r0_5d-migrate-r5_6d
Signed-off-by: Michal Zylowski <michal.zylowski@intel.com> Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Guoqing Jiang [Mon, 11 Jun 2018 09:03:44 +0000 (17:03 +0800)]
Free map to avoid resource leak issues
1. There are some places which didn't free map as
discovered by coverity.
CID 289661 (#1 of 1): Resource leak (RESOURCE_LEAK)12. leaked_storage: Variable mapl going out of scope leaks the storage it points to.
CID 289619 (#3 of 3): Resource leak (RESOURCE_LEAK)63. leaked_storage: Variable map going out of scope leaks the storage it points to.
CID 289618 (#1 of 1): Resource leak (RESOURCE_LEAK)26. leaked_storage: Variable map going out of scope leaks the storage it points to.
CID 289607 (#1 of 1): Resource leak (RESOURCE_LEAK)41. leaked_storage: Variable map going out of scope leaks the storage it points to.
2. If we call map_by_* inside a loop, then map_free
should be called in the same loop, and it is better
to set map to NULL after free.
3. And map_unlock is always called with map_lock,
if we don't call map_remove before map_unlock,
then the memory (allocated by map_lock -> map_read
-> map_add -> xmalloc) could be leaked. So we
need to free it in map_unlock as well.
Roman Sobanski [Fri, 8 Jun 2018 10:34:18 +0000 (12:34 +0200)]
imsm: correct num_data_stripes in metadata map for migration
When migrating an array from R0 to R10 num_data_stripes in metadata map
will not be updated. Update it to allow correct migration process.
Changes in R10 to R0 migration for clarity of code.
Signed-off-by: Roman Sobanski <roman.sobanski@intel.com> Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Mariusz Tkaczyk [Thu, 7 Jun 2018 12:47:47 +0000 (14:47 +0200)]
Assemble.c Don't ignore faulty disk when array is auto assembled.
Since commit 20dc76d15b40 ("imsm: Set disk slot number") mdadm
sets slot number for each disk in imsm array. Now auto-assemble determines
devices using slot number and ignores devices on the same slot that have
older generation number.
It causes infinit loop if failed device is still visible in system
(it has metadata, but it is not merged with exisiting array).
To avoid it, out-of-sync device should be added to the best[]. Later
mdadm adds it as spare to the container.
Imsm doesn't support disk replacement feature, so it can use rooms for
replacements.
Zhilong Liu [Wed, 30 May 2018 07:04:41 +0000 (15:04 +0800)]
mdadm/test: correct tests/testdev as testdev in 02r5grow
Fixes: a6994ccc230b ("mdadm/test: get rid of the tests/testdev") Signed-off-by: Zhilong Liu <zlliu@suse.com> Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Zhilong Liu [Wed, 30 May 2018 07:04:05 +0000 (15:04 +0800)]
mdadm/test: mdadm needn't make install on the system
Fixes: beb71de04d31 ("mdadm/test: enable clustermd testing under clustermd_tests/")
clustermd_tests/func.sh:
remove unnecessary 'make install', just ensure 'make everything' has done.
the original idea is to make the /sbin/mdadm version same as ./mdadm, and
this breakage has pointed out by commit: 59416da78fc6 ("tests/func.sh: Fix some total breakage in the test scripts")
Signed-off-by: Zhilong Liu <zlliu@suse.com> Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Xiao Ni [Wed, 30 May 2018 05:49:41 +0000 (13:49 +0800)]
Check major number of block device when querying md device
It give error message when query a non md device.
mdadm /dev/null
/dev/null: is an md device, but gives "Inappropriate ioctl for device" when queried
It's introduced by commit 5cb8599 and 8d0cd09
At first it checks whether a block is md device by function md_get_version.
In this function it does mainly two jobs:
1. send request by ioctl. (now it can be replace by argument ioctlerr)
2. check the block device major number which we don't do this.
We add the second judgement in this patch.
Fixes: 5cb8599 and 8d0cd09 Reported-by: Karsten Weiss <karsten.weiss@atos.net> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Jes Sorensen [Thu, 31 May 2018 15:45:21 +0000 (11:45 -0400)]
Monitor: Increase size of percentalert to avoid gcc warning
gcc-8.1 complains about truncated string operations. While we know
percent will never grow larger than 100, it doesn't cost us anything
to increase the size of 'percentalert' on the stack like this.
Michal Zylowski [Tue, 29 May 2018 13:47:25 +0000 (15:47 +0200)]
imsm: Do not require MDADM_EXPERIMENTAL flag anymore
Grow feature for IMSM metadata is currently fully supported and tested.
Reshape operation is not in experimental state anymore, so usage of this
flag is unnecessary.
Do not require MDADM_EXPERIMENTAL flag and remove obsolete information
from manual.
Signed-off-by: Michal Zylowski <michal.zylowski@intel.com> Acked-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com> Acked-by: Roman Sobanski <roman.sobanski@intel.com> Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Michal Zylowski [Tue, 29 May 2018 13:47:09 +0000 (15:47 +0200)]
imsm: Do not block volume creation when container has disks with mixed sector size
Currently when created container keeps disks with mixed sector size (few
4K disks and some 512 disks) there is no possibility to create volume from
disks with one sector size.
Allow volume creation when given disks are related with mixed container.
Signed-off-by: Michal Zylowski <michal.zylowski@intel.com> Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Jes Sorensen [Tue, 29 May 2018 20:09:47 +0000 (16:09 -0400)]
super-intel: Use memcpy() to avoid confusing gcc
When added :0 to serial number and copying it back, use memcpy()
instead of strncpy() as we know the actual length. This stops gcc
from complaining with -Werror=stringop-truncation enabled