[people/ms/u-boot.git] / include / configs / vexpress_aemv8a.h

/*
 * Configuration for Versatile Express. Parts were derived from other ARM
 *   configurations.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __VEXPRESS_AEMV8A_H
#define __VEXPRESS_AEMV8A_H

#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
#ifndef CONFIG_SEMIHOSTING
#error CONFIG_TARGET_VEXPRESS64_BASE_FVP requires CONFIG_SEMIHOSTING
#endif
#define CONFIG_ARMV8_SWITCH_TO_EL1
#endif

#define CONFIG_REMAKE_ELF

#define CONFIG_SUPPORT_RAW_INITRD

/* Link Definitions */
#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \
	defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM)
/* ATF loads u-boot here for BASE_FVP model */
#define CONFIG_SYS_TEXT_BASE		0x88000000
#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
#elif CONFIG_TARGET_VEXPRESS64_JUNO
#define CONFIG_SYS_TEXT_BASE		0xe0000000
#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
#endif

#define CONFIG_SYS_BOOTM_LEN (64 << 20)      /* Increase max gunzip size */

/* CS register bases for the original memory map. */
#define V2M_PA_CS0			0x00000000
#define V2M_PA_CS1			0x14000000
#define V2M_PA_CS2			0x18000000
#define V2M_PA_CS3			0x1c000000
#define V2M_PA_CS4			0x0c000000
#define V2M_PA_CS5			0x10000000

#define V2M_PERIPH_OFFSET(x)		(x << 16)
#define V2M_SYSREGS			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(1))
#define V2M_SYSCTL			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(2))
#define V2M_SERIAL_BUS_PCI		(V2M_PA_CS3 + V2M_PERIPH_OFFSET(3))

#define V2M_BASE			0x80000000

/* Common peripherals relative to CS7. */
#define V2M_AACI			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(4))
#define V2M_MMCI			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(5))
#define V2M_KMI0			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
#define V2M_KMI1			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))

#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
#define V2M_UART0			0x7ff80000
#define V2M_UART1			0x7ff70000
#else /* Not Juno */
#define V2M_UART0			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
#define V2M_UART1			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
#define V2M_UART2			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
#define V2M_UART3			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))
#endif

#define V2M_WDT				(V2M_PA_CS3 + V2M_PERIPH_OFFSET(15))

#define V2M_TIMER01			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(17))
#define V2M_TIMER23			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(18))

#define V2M_SERIAL_BUS_DVI		(V2M_PA_CS3 + V2M_PERIPH_OFFSET(22))
#define V2M_RTC				(V2M_PA_CS3 + V2M_PERIPH_OFFSET(23))

#define V2M_CF				(V2M_PA_CS3 + V2M_PERIPH_OFFSET(26))

#define V2M_CLCD			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(31))

/* System register offsets. */
#define V2M_SYS_CFGDATA			(V2M_SYSREGS + 0x0a0)
#define V2M_SYS_CFGCTRL			(V2M_SYSREGS + 0x0a4)
#define V2M_SYS_CFGSTAT			(V2M_SYSREGS + 0x0a8)

/* Generic Timer Definitions */
#define COUNTER_FREQUENCY		(0x1800000)	/* 24MHz */

/* Generic Interrupt Controller Definitions */
#ifdef CONFIG_GICV3
#define GICD_BASE			(0x2f000000)
#define GICR_BASE			(0x2f100000)
#else

#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \
	defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM)
#define GICD_BASE			(0x2f000000)
#define GICC_BASE			(0x2c000000)
#elif CONFIG_TARGET_VEXPRESS64_JUNO
#define GICD_BASE			(0x2C010000)
#define GICC_BASE			(0x2C02f000)
#endif
#endif /* !CONFIG_GICV3 */

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (8 << 20))

/* Ethernet Configuration */
#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
/* The real hardware Versatile express uses SMSC9118 */
#define CONFIG_SMC911X			1
#define CONFIG_SMC911X_32_BIT		1
#define CONFIG_SMC911X_BASE		(0x018000000)
#else
/* The Vexpress64 simulators use SMSC91C111 */
#define CONFIG_SMC91111			1
#define CONFIG_SMC91111_BASE		(0x01A000000)
#endif

/* PL011 Serial Configuration */
#define CONFIG_BAUDRATE			115200
#define CONFIG_CONS_INDEX		0
#define CONFIG_PL01X_SERIAL
#define CONFIG_PL011_SERIAL
#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
#define CONFIG_PL011_CLOCK		7273800
#else
#define CONFIG_PL011_CLOCK		24000000
#endif

/*#define CONFIG_MENU_SHOW*/
#define CONFIG_CMD_UNZIP
#define CONFIG_CMD_ENV
#define CONFIG_DOS_PARTITION

/* BOOTP options */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_PXE

/* Miscellaneous configurable options */
#define CONFIG_SYS_LOAD_ADDR		(V2M_BASE + 0x10000000)

/* Physical Memory Map */
#define PHYS_SDRAM_1			(V2M_BASE)	/* SDRAM Bank #1 */
/* Top 16MB reserved for secure world use */
#define DRAM_SEC_SIZE		0x01000000
#define PHYS_SDRAM_1_SIZE	0x80000000 - DRAM_SEC_SIZE
#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_1

#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
#define CONFIG_NR_DRAM_BANKS		2
#define PHYS_SDRAM_2			(0x880000000)
#define PHYS_SDRAM_2_SIZE		0x180000000
#else
#define CONFIG_NR_DRAM_BANKS		1
#endif

/* Enable memtest */
#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_1
#define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)

/* Initial environment variables */
#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
/*
 * Defines where the kernel and FDT exist in NOR flash and where it will
 * be copied into DRAM
 */
#define CONFIG_EXTRA_ENV_SETTINGS	\
				"kernel_name=norkern\0"	\
				"kernel_alt_name=Image\0"	\
				"kernel_addr=0x80080000\0" \
				"initrd_name=ramdisk.img\0"	\
				"initrd_addr=0x84000000\0"	\
				"fdtfile=board.dtb\0" \
				"fdt_alt_name=juno\0" \
				"fdt_addr=0x83000000\0" \
				"fdt_high=0xffffffffffffffff\0" \
				"initrd_high=0xffffffffffffffff\0" \

/* Assume we boot with root on the first partition of a USB stick */
#define CONFIG_BOOTARGS		"console=ttyAMA0,115200n8 " \
				"root=/dev/sda2 rw " \
				"rootwait "\
				"earlyprintk=pl011,0x7ff80000 debug "\
				"user_debug=31 "\
				"androidboot.hardware=juno "\
				"loglevel=9"

/* Copy the kernel and FDT to DRAM memory and boot */
#define CONFIG_BOOTCOMMAND	"afs load ${kernel_name} ${kernel_addr} ; " \
				"if test $? -eq 1; then "\
				"  echo Loading ${kernel_alt_name} instead of "\
				"${kernel_name}; "\
				"  afs load ${kernel_alt_name} ${kernel_addr};"\
				"fi ; "\
				"afs load  ${fdtfile} ${fdt_addr} ; " \
				"if test $? -eq 1; then "\
				"  echo Loading ${fdt_alt_name} instead of "\
				"${fdtfile}; "\
				"  afs load ${fdt_alt_name} ${fdt_addr}; "\
				"fi ; "\
				"fdt addr ${fdt_addr}; fdt resize; " \
				"if afs load  ${initrd_name} ${initrd_addr} ; "\
				"then "\
				"  setenv initrd_param ${initrd_addr}; "\
				"  else setenv initrd_param -; "\
				"fi ; " \
				"booti ${kernel_addr} ${initrd_param} ${fdt_addr}"


#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP
#define CONFIG_EXTRA_ENV_SETTINGS	\
				"kernel_name=Image\0"		\
				"kernel_addr=0x80080000\0"	\
				"initrd_name=ramdisk.img\0"	\
				"initrd_addr=0x88000000\0"	\
				"fdtfile=devtree.dtb\0"		\
				"fdt_addr=0x83000000\0"		\
				"fdt_high=0xffffffffffffffff\0"	\
				"initrd_high=0xffffffffffffffff\0"

#define CONFIG_BOOTARGS		"console=ttyAMA0 earlyprintk=pl011,"\
				"0x1c090000 debug user_debug=31 "\
				"loglevel=9"

#define CONFIG_BOOTCOMMAND	"smhload ${kernel_name} ${kernel_addr}; " \
				"smhload ${fdtfile} ${fdt_addr}; " \
				"smhload ${initrd_name} ${initrd_addr} "\
				"initrd_end; " \
				"fdt addr ${fdt_addr}; fdt resize; " \
				"fdt chosen ${initrd_addr} ${initrd_end}; " \
				"booti $kernel_addr - $fdt_addr"


#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM
#define CONFIG_EXTRA_ENV_SETTINGS	\
				"kernel_addr=0x80080000\0"	\
				"initrd_addr=0x84000000\0"	\
				"fdt_addr=0x83000000\0"		\
				"fdt_high=0xffffffffffffffff\0"	\
				"initrd_high=0xffffffffffffffff\0"

#define CONFIG_BOOTARGS		"console=ttyAMA0 earlyprintk=pl011,"\
				"0x1c090000 debug user_debug=31 "\
				"androidboot.hardware=fvpbase "\
				"root=/dev/vda2 rw "\
				"rootwait "\
				"loglevel=9"

#define CONFIG_BOOTCOMMAND	"booti $kernel_addr $initrd_addr $fdt_addr"


#endif

/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_MAXARGS		64	/* max command args */

#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
#define CONFIG_SYS_FLASH_BASE		0x08000000
/* 255 x 256KiB sectors + 4 x 64KiB sectors at the end = 259 */
#define CONFIG_SYS_MAX_FLASH_SECT	259
/* Store environment at top of flash in the same location as blank.img */
/* in the Juno firmware. */
#define CONFIG_ENV_ADDR			0x0BFC0000
#define CONFIG_ENV_SECT_SIZE		0x00010000
#else
#define CONFIG_SYS_FLASH_BASE		0x0C000000
/* 256 x 256KiB sectors */
#define CONFIG_SYS_MAX_FLASH_SECT	256
/* Store environment at top of flash */
#define CONFIG_ENV_ADDR			0x0FFC0000
#define CONFIG_ENV_SECT_SIZE		0x00040000
#endif

#define CONFIG_SYS_FLASH_CFI		1
#define CONFIG_FLASH_CFI_DRIVER		1
#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_32BIT
#define CONFIG_SYS_MAX_FLASH_BANKS	1

#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
#define CONFIG_SYS_FLASH_PROTECTION	/* The devices have real protection */
#define CONFIG_SYS_FLASH_EMPTY_INFO	/* flinfo indicates empty blocks */
#define FLASH_MAX_SECTOR_SIZE		0x00040000
#define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
#define CONFIG_ENV_IS_IN_FLASH		1

#endif /* __VEXPRESS_AEMV8A_H */
Commit	Line	Data
12916829 DF	1	/*
	2	* Configuration for Versatile Express. Parts were derived from other ARM
	3	* configurations.
	4	*
	5	* SPDX-License-Identifier: GPL-2.0+
	6	*/
	7
	8	#ifndef __VEXPRESS_AEMV8A_H
	9	#define __VEXPRESS_AEMV8A_H
	10
f91afc4d	11	#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
261d2760	12	#ifndef CONFIG_SEMIHOSTING
f91afc4d	13	#error CONFIG_TARGET_VEXPRESS64_BASE_FVP requires CONFIG_SEMIHOSTING
261d2760	14	#endif
261d2760 DR	15	#define CONFIG_ARMV8_SWITCH_TO_EL1
	16	#endif
	17
12916829 DF	18	#define CONFIG_REMAKE_ELF
12916829 DF	19
12916829 DF	20	#define CONFIG_SUPPORT_RAW_INITRD
12916829 DF	21
12916829	22	/* Link Definitions */
fc04b923 RH	23	#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) \|\| \
fc04b923 RH	24	defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM)
261d2760 DR	25	/* ATF loads u-boot here for BASE_FVP model */
	26	#define CONFIG_SYS_TEXT_BASE 0x88000000
	27	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
ffc10373 LW	28	#elif CONFIG_TARGET_VEXPRESS64_JUNO
	29	#define CONFIG_SYS_TEXT_BASE 0xe0000000
	30	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
261d2760	31	#endif
12916829	32
0d3012af RH	33	#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
0d3012af RH	34
12916829 DF	35	/* CS register bases for the original memory map. */
	36	#define V2M_PA_CS0 0x00000000
	37	#define V2M_PA_CS1 0x14000000
	38	#define V2M_PA_CS2 0x18000000
	39	#define V2M_PA_CS3 0x1c000000
	40	#define V2M_PA_CS4 0x0c000000
	41	#define V2M_PA_CS5 0x10000000
	42
	43	#define V2M_PERIPH_OFFSET(x) (x << 16)
	44	#define V2M_SYSREGS (V2M_PA_CS3 + V2M_PERIPH_OFFSET(1))
	45	#define V2M_SYSCTL (V2M_PA_CS3 + V2M_PERIPH_OFFSET(2))
	46	#define V2M_SERIAL_BUS_PCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(3))
	47
	48	#define V2M_BASE 0x80000000
	49
12916829 DF	50	/* Common peripherals relative to CS7. */
	51	#define V2M_AACI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4))
	52	#define V2M_MMCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5))
	53	#define V2M_KMI0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
	54	#define V2M_KMI1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))
	55
ffc10373 LW	56	#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
	57	#define V2M_UART0 0x7ff80000
	58	#define V2M_UART1 0x7ff70000
	59	#else /* Not Juno */
12916829 DF	60	#define V2M_UART0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
	61	#define V2M_UART1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
	62	#define V2M_UART2 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
	63	#define V2M_UART3 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))
ffc10373	64	#endif
12916829 DF	65
	66	#define V2M_WDT (V2M_PA_CS3 + V2M_PERIPH_OFFSET(15))
	67
	68	#define V2M_TIMER01 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(17))
	69	#define V2M_TIMER23 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(18))
	70
	71	#define V2M_SERIAL_BUS_DVI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(22))
	72	#define V2M_RTC (V2M_PA_CS3 + V2M_PERIPH_OFFSET(23))
	73
	74	#define V2M_CF (V2M_PA_CS3 + V2M_PERIPH_OFFSET(26))
	75
	76	#define V2M_CLCD (V2M_PA_CS3 + V2M_PERIPH_OFFSET(31))
	77
	78	/* System register offsets. */
	79	#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0)
	80	#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4)
	81	#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8)
	82
	83	/* Generic Timer Definitions */
	84	#define COUNTER_FREQUENCY (0x1800000) /* 24MHz */
	85
	86	/* Generic Interrupt Controller Definitions */
c71645ad DF	87	#ifdef CONFIG_GICV3
	88	#define GICD_BASE (0x2f000000)
	89	#define GICR_BASE (0x2f100000)
	90	#else
261d2760	91
fc04b923 RH	92	#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) \|\| \
fc04b923 RH	93	defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM)
261d2760 DR	94	#define GICD_BASE (0x2f000000)
261d2760 DR	95	#define GICC_BASE (0x2c000000)
ffc10373 LW	96	#elif CONFIG_TARGET_VEXPRESS64_JUNO
	97	#define GICD_BASE (0x2C010000)
	98	#define GICC_BASE (0x2C02f000)
261d2760	99	#endif
03314f0e	100	#endif /* !CONFIG_GICV3 */
12916829	101
12916829	102	/* Size of malloc() pool */
5bcae13e	103	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (8 << 20))
12916829	104
b31f9d7a LW	105	/* Ethernet Configuration */
	106	#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
	107	/* The real hardware Versatile express uses SMSC9118 */
	108	#define CONFIG_SMC911X 1
	109	#define CONFIG_SMC911X_32_BIT 1
	110	#define CONFIG_SMC911X_BASE (0x018000000)
	111	#else
	112	/* The Vexpress64 simulators use SMSC91C111 */
3865ceb7 BS	113	#define CONFIG_SMC91111 1
3865ceb7 BS	114	#define CONFIG_SMC91111_BASE (0x01A000000)
b31f9d7a	115	#endif
12916829 DF	116
12916829 DF	117	/* PL011 Serial Configuration */
d280ea00	118	#define CONFIG_BAUDRATE 115200
d8bafe13	119	#define CONFIG_CONS_INDEX 0
d280ea00	120	#define CONFIG_PL01X_SERIAL
12916829	121	#define CONFIG_PL011_SERIAL
ffc10373 LW	122	#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
	123	#define CONFIG_PL011_CLOCK 7273800
	124	#else
12916829	125	#define CONFIG_PL011_CLOCK 24000000
ffc10373	126	#endif
12916829	127
12916829	128	/#define CONFIG_MENU_SHOW/
67172528	129	#define CONFIG_CMD_UNZIP
12916829	130	#define CONFIG_CMD_ENV
12916829 DF	131	#define CONFIG_DOS_PARTITION
	132
	133	/* BOOTP options */
	134	#define CONFIG_BOOTP_BOOTFILESIZE
	135	#define CONFIG_BOOTP_BOOTPATH
	136	#define CONFIG_BOOTP_GATEWAY
	137	#define CONFIG_BOOTP_HOSTNAME
	138	#define CONFIG_BOOTP_PXE
12916829 DF	139
	140	/* Miscellaneous configurable options */
	141	#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x10000000)
	142
	143	/* Physical Memory Map */
12916829	144	#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */
30355708 LW	145	/* Top 16MB reserved for secure world use */
	146	#define DRAM_SEC_SIZE 0x01000000
	147	#define PHYS_SDRAM_1_SIZE 0x80000000 - DRAM_SEC_SIZE
	148	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	149
2c2b2183 RH	150	#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
	151	#define CONFIG_NR_DRAM_BANKS 2
	152	#define PHYS_SDRAM_2 (0x880000000)
	153	#define PHYS_SDRAM_2_SIZE 0x180000000
	154	#else
	155	#define CONFIG_NR_DRAM_BANKS 1
	156	#endif
	157
30355708	158	/* Enable memtest */
30355708 LW	159	#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
30355708 LW	160	#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)
12916829 DF	161
12916829 DF	162	/* Initial environment variables */
10d1491b LW	163	#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
	164	/*
	165	* Defines where the kernel and FDT exist in NOR flash and where it will
	166	* be copied into DRAM
	167	*/
	168	#define CONFIG_EXTRA_ENV_SETTINGS \
ecbed5d6 RH	169	"kernel_name=norkern\0" \
ecbed5d6 RH	170	"kernel_alt_name=Image\0" \
7babe482	171	"kernel_addr=0x80080000\0" \
4a6bdb59 RH	172	"initrd_name=ramdisk.img\0" \
4a6bdb59 RH	173	"initrd_addr=0x84000000\0" \
da3e620d	174	"fdtfile=board.dtb\0" \
ecbed5d6	175	"fdt_alt_name=juno\0" \
10d1491b LW	176	"fdt_addr=0x83000000\0" \
	177	"fdt_high=0xffffffffffffffff\0" \
	178	"initrd_high=0xffffffffffffffff\0" \
	179
	180	/* Assume we boot with root on the first partition of a USB stick */
	181	#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 " \
492f24e8	182	"root=/dev/sda2 rw " \
33665f7c	183	"rootwait "\
c0ae9703 RH	184	"earlyprintk=pl011,0x7ff80000 debug "\
c0ae9703 RH	185	"user_debug=31 "\
74e264b4	186	"androidboot.hardware=juno "\
10d1491b LW	187	"loglevel=9"
	188
	189	/* Copy the kernel and FDT to DRAM memory and boot */
	190	#define CONFIG_BOOTCOMMAND "afs load ${kernel_name} ${kernel_addr} ; " \
ecbed5d6 RH	191	"if test $? -eq 1; then "\
	192	" echo Loading ${kernel_alt_name} instead of "\
	193	"${kernel_name}; "\
	194	" afs load ${kernel_alt_name} ${kernel_addr};"\
	195	"fi ; "\
da3e620d	196	"afs load ${fdtfile} ${fdt_addr} ; " \
ecbed5d6 RH	197	"if test $? -eq 1; then "\
ecbed5d6 RH	198	" echo Loading ${fdt_alt_name} instead of "\
da3e620d	199	"${fdtfile}; "\
ecbed5d6 RH	200	" afs load ${fdt_alt_name} ${fdt_addr}; "\
ecbed5d6 RH	201	"fi ; "\
10d1491b	202	"fdt addr ${fdt_addr}; fdt resize; " \
4a6bdb59 RH	203	"if afs load ${initrd_name} ${initrd_addr} ; "\
	204	"then "\
	205	" setenv initrd_param ${initrd_addr}; "\
	206	" else setenv initrd_param -; "\
	207	"fi ; " \
	208	"booti ${kernel_addr} ${initrd_param} ${fdt_addr}"
10d1491b	209
10d1491b LW	210
10d1491b LW	211	#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP
261d2760	212	#define CONFIG_EXTRA_ENV_SETTINGS \
1fd0f92e	213	"kernel_name=Image\0" \
7babe482	214	"kernel_addr=0x80080000\0" \
261d2760	215	"initrd_name=ramdisk.img\0" \
49995ffe	216	"initrd_addr=0x88000000\0" \
da3e620d	217	"fdtfile=devtree.dtb\0" \
49995ffe	218	"fdt_addr=0x83000000\0" \
261d2760 DR	219	"fdt_high=0xffffffffffffffff\0" \
	220	"initrd_high=0xffffffffffffffff\0"
	221
	222	#define CONFIG_BOOTARGS "console=ttyAMA0 earlyprintk=pl011,"\
	223	"0x1c090000 debug user_debug=31 "\
	224	"loglevel=9"
	225
49995ffe	226	#define CONFIG_BOOTCOMMAND "smhload ${kernel_name} ${kernel_addr}; " \
da3e620d	227	"smhload ${fdtfile} ${fdt_addr}; " \
c0ae9703 RH	228	"smhload ${initrd_name} ${initrd_addr} "\
c0ae9703 RH	229	"initrd_end; " \
1fd0f92e LW	230	"fdt addr ${fdt_addr}; fdt resize; " \
	231	"fdt chosen ${initrd_addr} ${initrd_end}; " \
	232	"booti $kernel_addr - $fdt_addr"
261d2760	233
261d2760	234
fc04b923 RH	235	#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM
	236	#define CONFIG_EXTRA_ENV_SETTINGS \
	237	"kernel_addr=0x80080000\0" \
	238	"initrd_addr=0x84000000\0" \
	239	"fdt_addr=0x83000000\0" \
	240	"fdt_high=0xffffffffffffffff\0" \
	241	"initrd_high=0xffffffffffffffff\0"
	242
	243	#define CONFIG_BOOTARGS "console=ttyAMA0 earlyprintk=pl011,"\
	244	"0x1c090000 debug user_debug=31 "\
	245	"androidboot.hardware=fvpbase "\
	246	"root=/dev/vda2 rw "\
	247	"rootwait "\
	248	"loglevel=9"
	249
	250	#define CONFIG_BOOTCOMMAND "booti $kernel_addr $initrd_addr $fdt_addr"
	251
fc04b923	252
261d2760	253	#endif
12916829	254
12916829 DF	255	/* Monitor Command Prompt */
12916829 DF	256	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
12916829 DF	257	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
12916829 DF	258	sizeof(CONFIG_SYS_PROMPT) + 16)
12916829 DF	259	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
12916829 DF	260	#define CONFIG_SYS_LONGHELP
5bcae13e	261	#define CONFIG_CMDLINE_EDITING
12916829 DF	262	#define CONFIG_SYS_MAXARGS 64 /* max command args */
12916829 DF	263
f3c71c93 RH	264	#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
	265	#define CONFIG_SYS_FLASH_BASE 0x08000000
	266	/* 255 x 256KiB sectors + 4 x 64KiB sectors at the end = 259 */
	267	#define CONFIG_SYS_MAX_FLASH_SECT 259
	268	/* Store environment at top of flash in the same location as blank.img */
	269	/* in the Juno firmware. */
	270	#define CONFIG_ENV_ADDR 0x0BFC0000
	271	#define CONFIG_ENV_SECT_SIZE 0x00010000
14f264e6	272	#else
f3c71c93 RH	273	#define CONFIG_SYS_FLASH_BASE 0x0C000000
	274	/* 256 x 256KiB sectors */
	275	#define CONFIG_SYS_MAX_FLASH_SECT 256
	276	/* Store environment at top of flash */
	277	#define CONFIG_ENV_ADDR 0x0FFC0000
	278	#define CONFIG_ENV_SECT_SIZE 0x00040000
	279	#endif
	280
14f264e6 LW	281	#define CONFIG_SYS_FLASH_CFI 1
14f264e6 LW	282	#define CONFIG_FLASH_CFI_DRIVER 1
f19f389f	283	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT
f3c71c93	284	#define CONFIG_SYS_MAX_FLASH_BANKS 1
14f264e6	285
14f264e6 LW	286	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
	287	#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */
	288	#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
f3c71c93 RH	289	#define FLASH_MAX_SECTOR_SIZE 0x00040000
	290	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
	291	#define CONFIG_ENV_IS_IN_FLASH 1
14f264e6	292
12916829	293	#endif /* __VEXPRESS_AEMV8A_H */