[people/ms/u-boot.git] / include / configs / xilinx_zynqmp.h

/*
 * Configuration for Xilinx ZynqMP
 * (C) Copyright 2014 - 2015 Xilinx, Inc.
 * Michal Simek <michal.simek@xilinx.com>
 *
 * Based on Configuration for Versatile Express
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __XILINX_ZYNQMP_H
#define __XILINX_ZYNQMP_H

#define CONFIG_REMAKE_ELF

/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */

/* Generic Interrupt Controller Definitions */
#define CONFIG_GICV2
#define GICD_BASE	0xF9010000
#define GICC_BASE	0xF9020000

#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_SYS_MEMTEST_SCRATCH	0xfffc0000

#ifndef CONFIG_NR_DRAM_BANKS
# define CONFIG_NR_DRAM_BANKS		2
#endif
#define CONFIG_SYS_MEMTEST_START	0
#define CONFIG_SYS_MEMTEST_END		1000

#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE

/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
#if !defined(COUNTER_FREQUENCY)
# define COUNTER_FREQUENCY		100000000
#endif

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 0x2000000)

/* Serial setup */
#define CONFIG_ARM_DCC
#define CONFIG_CPU_ARMV8

#define CONFIG_CONS_INDEX		0
#define CONFIG_SYS_BAUDRATE_TABLE \
	{ 4800, 9600, 19200, 38400, 57600, 115200 }

/* Command line configuration */
#define CONFIG_MP

/* BOOTP options */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_MAY_FAIL
#define CONFIG_BOOTP_DNS
#define CONFIG_BOOTP_PXE
#define CONFIG_BOOTP_SUBNETMASK

/* Diff from config_distro_defaults.h */
#define CONFIG_SUPPORT_RAW_INITRD
#if !defined(CONFIG_SPL_BUILD)
#define CONFIG_ENV_VARS_UBOOT_CONFIG
#endif
#define CONFIG_AUTO_COMPLETE

#if defined(CONFIG_MMC_SDHCI_ZYNQ)
# define CONFIG_SUPPORT_EMMC_BOOT
# ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
#  define CONFIG_ZYNQ_SDHCI_MAX_FREQ	200000000
# endif
#endif

#ifdef CONFIG_NAND_ARASAN
# define CONFIG_SYS_MAX_NAND_DEVICE	1
# define CONFIG_SYS_NAND_ONFI_DETECTION
# define CONFIG_MTD_DEVICE
#endif

#if defined(CONFIG_SPL_BUILD)
#define CONFIG_ZYNQMP_PSU_INIT_ENABLED
#endif

/* Miscellaneous configurable options */
#define CONFIG_SYS_LOAD_ADDR		0x8000000

#if defined(CONFIG_ZYNQMP_USB)
#define CONFIG_SYS_DFU_DATA_BUF_SIZE	0x1800000
#define DFU_DEFAULT_POLL_TIMEOUT	300
#define CONFIG_USB_CABLE_CHECK
#define CONFIG_USB_FUNCTION_THOR
#define CONFIG_THOR_RESET_OFF
#define DFU_ALT_INFO_RAM \
	"dfu_ram_info=" \
	"setenv dfu_alt_info " \
	"Image ram $kernel_addr $kernel_size\\\\;" \
	"system.dtb ram $fdt_addr $fdt_size\0" \
	"dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
	"thor_ram=run dfu_ram_info && thordown 0 ram 0\0"

#define DFU_ALT_INFO  \
		DFU_ALT_INFO_RAM

#ifndef CONFIG_SPL_BUILD
# define PARTS_DEFAULT \
	"partitions=uuid_disk=${uuid_gpt_disk};" \
	"name=""boot"",size=16M,uuid=${uuid_gpt_boot};" \
	"name=""Linux"",size=-M,uuid=${uuid_gpt_Linux}\0"
#endif
#endif

#if !defined(DFU_ALT_INFO)
# define DFU_ALT_INFO
#endif

#if !defined(PARTS_DEFAULT)
# define PARTS_DEFAULT
#endif

/* Do not preserve environment */
#define CONFIG_ENV_SIZE			0x8000

/* Monitor Command Prompt */
/* Console I/O Buffer Size */
#define CONFIG_SYS_CBSIZE		2048
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING
#define CONFIG_PANIC_HANG
#define CONFIG_SYS_MAXARGS		64

/* Ethernet driver */
#if defined(CONFIG_ZYNQ_GEM)
# define CONFIG_MII
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
# define CONFIG_PHY_MARVELL
# define CONFIG_PHY_NATSEMI
# define CONFIG_PHY_TI
# define CONFIG_PHY_VITESSE
# define CONFIG_PHY_REALTEK
# define PHY_ANEG_TIMEOUT       20000
#endif

/* I2C */
#if defined(CONFIG_SYS_I2C_ZYNQ)
# define CONFIG_SYS_I2C
# define CONFIG_SYS_I2C_ZYNQ_SPEED		100000
# define CONFIG_SYS_I2C_ZYNQ_SLAVE		0
#endif

/* EEPROM */
#ifdef CONFIG_ZYNQMP_EEPROM
# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
# define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
# define CONFIG_SYS_EEPROM_SIZE			(64 * 1024)
#endif

#ifdef CONFIG_SATA_CEVA
#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
#define CONFIG_SYS_SCSI_MAX_LUN		1
#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
					 CONFIG_SYS_SCSI_MAX_LUN)
#endif

#define CONFIG_SYS_BOOTM_LEN	(60 * 1024 * 1024)

#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_CLOCKS

#define ENV_MEM_LAYOUT_SETTINGS \
	"fdt_high=10000000\0" \
	"initrd_high=10000000\0" \
	"fdt_addr_r=0x40000000\0" \
	"pxefile_addr_r=0x10000000\0" \
	"kernel_addr_r=0x18000000\0" \
	"scriptaddr=0x02000000\0" \
	"ramdisk_addr_r=0x02100000\0" \

#if defined(CONFIG_MMC_SDHCI_ZYNQ)
# define BOOT_TARGET_DEVICES_MMC(func)	func(MMC, mmc, 0) func(MMC, mmc, 1)
#else
# define BOOT_TARGET_DEVICES_MMC(func)
#endif

#if defined(CONFIG_SATA_CEVA)
# define BOOT_TARGET_DEVICES_SCSI(func)	func(SCSI, scsi, 0)
#else
# define BOOT_TARGET_DEVICES_SCSI(func)
#endif

#if defined(CONFIG_ZYNQMP_USB)
# define BOOT_TARGET_DEVICES_USB(func)	func(USB, usb, 0) func(USB, usb, 1)
#else
# define BOOT_TARGET_DEVICES_USB(func)
#endif

#define BOOT_TARGET_DEVICES(func) \
	BOOT_TARGET_DEVICES_MMC(func) \
	BOOT_TARGET_DEVICES_USB(func) \
	BOOT_TARGET_DEVICES_SCSI(func) \
	func(PXE, pxe, na) \
	func(DHCP, dhcp, na)

#include <config_distro_bootcmd.h>

/* Initial environment variables */
#ifndef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
	ENV_MEM_LAYOUT_SETTINGS \
	BOOTENV \
	DFU_ALT_INFO
#endif

/* SPL can't handle all huge variables - define just DFU */
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT)
#undef CONFIG_EXTRA_ENV_SETTINGS
# define CONFIG_EXTRA_ENV_SETTINGS \
	"dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \
			  "atf-uboot.ub ram 0x10000000 0x1000000;" \
			  "Image ram 0x80000 0x3f80000;" \
			  "system.dtb ram 0x4000000 0x100000\0" \
	"dfu_bufsiz=0x1000\0"
#endif

#define CONFIG_SPL_TEXT_BASE		0xfffc0000
#define CONFIG_SPL_STACK		0xfffffffc
#define CONFIG_SPL_MAX_SIZE		0x40000

/* Just random location in OCM */
#define CONFIG_SPL_BSS_START_ADDR	0x0
#define CONFIG_SPL_BSS_MAX_SIZE		0x80000

#define CONFIG_SPL_FRAMEWORK

#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT)
# define CONFIG_SPL_SPI_LOAD
# define CONFIG_SYS_SPI_KERNEL_OFFS	0x80000
# define CONFIG_SYS_SPI_ARGS_OFFS	0xa0000
# define CONFIG_SYS_SPI_ARGS_SIZE	0xa0000

# define CONFIG_SYS_SPI_U_BOOT_OFFS	0x170000
#endif

/* u-boot is like dtb */
#define CONFIG_SPL_FS_LOAD_ARGS_NAME	"u-boot.bin"
#define CONFIG_SYS_SPL_ARGS_ADDR	0x8000000

/* ATF is my kernel image */
#define CONFIG_SPL_FS_LOAD_KERNEL_NAME	"atf-uboot.ub"

/* FIT load address for RAM boot */
#define CONFIG_SPL_LOAD_FIT_ADDRESS	0x10000000

/* MMC support */
#ifdef CONFIG_MMC_SDHCI_ZYNQ
# define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0 /* unused */
# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0 /* unused */
# define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0 /* unused */
# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
#endif

#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT)
# undef CONFIG_CMD_BOOTD
# define CONFIG_SPL_ENV_SUPPORT
# define CONFIG_SPL_HASH_SUPPORT
# define CONFIG_ENV_MAX_ENTRIES	10
#endif

#define CONFIG_SYS_SPL_MALLOC_START	0x20000000
#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000

#ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
# error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used"
#endif

#define CONFIG_BOARD_EARLY_INIT_F

#endif /* __XILINX_ZYNQMP_H */
Commit	Line	Data
84c7204b MS	1	/*
	2	* Configuration for Xilinx ZynqMP
	3	* (C) Copyright 2014 - 2015 Xilinx, Inc.
	4	* Michal Simek <michal.simek@xilinx.com>
	5	*
	6	* Based on Configuration for Versatile Express
	7	*
	8	* SPDX-License-Identifier: GPL-2.0+
	9	*/
	10
	11	#ifndef __XILINX_ZYNQMP_H
	12	#define __XILINX_ZYNQMP_H
	13
	14	#define CONFIG_REMAKE_ELF
	15
	16	/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
	17
84c7204b MS	18	/* Generic Interrupt Controller Definitions */
	19	#define CONFIG_GICV2
	20	#define GICD_BASE 0xF9010000
	21	#define GICC_BASE 0xF9020000
	22
d759512f MS	23	#define CONFIG_SYS_ALT_MEMTEST
	24	#define CONFIG_SYS_MEMTEST_SCRATCH 0xfffc0000
	25
8d59d7f6 MS	26	#ifndef CONFIG_NR_DRAM_BANKS
	27	# define CONFIG_NR_DRAM_BANKS 2
	28	#endif
	29	#define CONFIG_SYS_MEMTEST_START 0
	30	#define CONFIG_SYS_MEMTEST_END 1000
84c7204b	31
8fbf678b	32	#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
84c7204b	33
84c7204b	34	/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
713b6164 MS	35	#if !defined(COUNTER_FREQUENCY)
	36	# define COUNTER_FREQUENCY 100000000
	37	#endif
84c7204b MS	38
84c7204b MS	39	/* Size of malloc() pool */
16fa00a7	40	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x2000000)
84c7204b MS	41
84c7204b MS	42	/* Serial setup */
636ac181 MS	43	#define CONFIG_ARM_DCC
636ac181 MS	44	#define CONFIG_CPU_ARMV8
84c7204b MS	45
84c7204b MS	46	#define CONFIG_CONS_INDEX 0
84c7204b MS	47	#define CONFIG_SYS_BAUDRATE_TABLE \
	48	{ 4800, 9600, 19200, 38400, 57600, 115200 }
	49
	50	/* Command line configuration */
5cb24200	51	#define CONFIG_MP
84c7204b	52
cb7ea820 MS	53	/* BOOTP options */
	54	#define CONFIG_BOOTP_BOOTFILESIZE
	55	#define CONFIG_BOOTP_BOOTPATH
	56	#define CONFIG_BOOTP_GATEWAY
	57	#define CONFIG_BOOTP_HOSTNAME
	58	#define CONFIG_BOOTP_MAY_FAIL
a1207de0 MS	59	#define CONFIG_BOOTP_DNS
	60	#define CONFIG_BOOTP_PXE
	61	#define CONFIG_BOOTP_SUBNETMASK
a1207de0 MS	62
	63	/* Diff from config_distro_defaults.h */
	64	#define CONFIG_SUPPORT_RAW_INITRD
d58fc12e	65	#if !defined(CONFIG_SPL_BUILD)
a1207de0	66	#define CONFIG_ENV_VARS_UBOOT_CONFIG
d58fc12e	67	#endif
a1207de0 MS	68	#define CONFIG_AUTO_COMPLETE
a1207de0 MS	69
08aa0334	70	#if defined(CONFIG_MMC_SDHCI_ZYNQ)
926782cd	71	# define CONFIG_SUPPORT_EMMC_BOOT
f3bd7280 MS	72	# ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
	73	# define CONFIG_ZYNQ_SDHCI_MAX_FREQ 200000000
	74	# endif
46f68e68 MS	75	#endif
46f68e68 MS	76
78cb965a	77	#ifdef CONFIG_NAND_ARASAN
78cb965a	78	# define CONFIG_SYS_MAX_NAND_DEVICE 1
78cb965a SDPP	79	# define CONFIG_SYS_NAND_ONFI_DETECTION
	80	# define CONFIG_MTD_DEVICE
	81	#endif
	82
88f05a92 MS	83	#if defined(CONFIG_SPL_BUILD)
	84	#define CONFIG_ZYNQMP_PSU_INIT_ENABLED
	85	#endif
	86
84c7204b MS	87	/* Miscellaneous configurable options */
	88	#define CONFIG_SYS_LOAD_ADDR 0x8000000
	89
16fa00a7	90	#if defined(CONFIG_ZYNQMP_USB)
16fa00a7 SDPP	91	#define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000
16fa00a7 SDPP	92	#define DFU_DEFAULT_POLL_TIMEOUT 300
16fa00a7	93	#define CONFIG_USB_CABLE_CHECK
16fa00a7 SDPP	94	#define CONFIG_USB_FUNCTION_THOR
	95	#define CONFIG_THOR_RESET_OFF
	96	#define DFU_ALT_INFO_RAM \
	97	"dfu_ram_info=" \
0e43140b	98	"setenv dfu_alt_info " \
1b19daf4 SDPP	99	"Image ram $kernel_addr $kernel_size\\\\;" \
1b19daf4 SDPP	100	"system.dtb ram $fdt_addr $fdt_size\0" \
16fa00a7 SDPP	101	"dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
	102	"thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
	103
	104	#define DFU_ALT_INFO \
	105	DFU_ALT_INFO_RAM
5ce987fe SDPP	106
5ce987fe SDPP	107	#ifndef CONFIG_SPL_BUILD
5ce987fe SDPP	108	# define PARTS_DEFAULT \
	109	"partitions=uuid_disk=${uuid_gpt_disk};" \
	110	"name=""boot"",size=16M,uuid=${uuid_gpt_boot};" \
	111	"name=""Linux"",size=-M,uuid=${uuid_gpt_Linux}\0"
	112	#endif
16fa00a7 SDPP	113	#endif
	114
	115	#if !defined(DFU_ALT_INFO)
	116	# define DFU_ALT_INFO
	117	#endif
	118
5ce987fe SDPP	119	#if !defined(PARTS_DEFAULT)
	120	# define PARTS_DEFAULT
	121	#endif
	122
84c7204b	123	/* Do not preserve environment */
936b0384	124	#define CONFIG_ENV_SIZE 0x8000
84c7204b MS	125
	126	/* Monitor Command Prompt */
	127	/* Console I/O Buffer Size */
	128	#define CONFIG_SYS_CBSIZE 2048
84c7204b MS	129	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	130	#define CONFIG_SYS_LONGHELP
	131	#define CONFIG_CMDLINE_EDITING
6ee28cb9	132	#define CONFIG_PANIC_HANG
84c7204b MS	133	#define CONFIG_SYS_MAXARGS 64
84c7204b MS	134
cb7ea820	135	/* Ethernet driver */
596e5782	136	#if defined(CONFIG_ZYNQ_GEM)
cb7ea820 MS	137	# define CONFIG_MII
cb7ea820 MS	138	# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
cb7ea820	139	# define CONFIG_PHY_MARVELL
f96fe2c0	140	# define CONFIG_PHY_NATSEMI
bf146325	141	# define CONFIG_PHY_TI
a1a6af82 MS	142	# define CONFIG_PHY_VITESSE
a1a6af82 MS	143	# define CONFIG_PHY_REALTEK
e2928f32	144	# define PHY_ANEG_TIMEOUT 20000
cb7ea820 MS	145	#endif
cb7ea820 MS	146
2594e03c SDPP	147	/* I2C */
2594e03c SDPP	148	#if defined(CONFIG_SYS_I2C_ZYNQ)
2594e03c SDPP	149	# define CONFIG_SYS_I2C
	150	# define CONFIG_SYS_I2C_ZYNQ_SPEED 100000
	151	# define CONFIG_SYS_I2C_ZYNQ_SLAVE 0
	152	#endif
	153
2594e03c SDPP	154	/* EEPROM */
2594e03c SDPP	155	#ifdef CONFIG_ZYNQMP_EEPROM
2594e03c SDPP	156	# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
	157	# define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
	158	# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
	159	# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
	160	# define CONFIG_SYS_EEPROM_SIZE (64 * 1024)
	161	#endif
	162
0d169b8c	163	#ifdef CONFIG_SATA_CEVA
679b994a	164	#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
6fe6f135 MS	165	#define CONFIG_SYS_SCSI_MAX_LUN 1
	166	#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
	167	CONFIG_SYS_SCSI_MAX_LUN)
6fe6f135 MS	168	#endif
6fe6f135 MS	169
84c7204b MS	170	#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
84c7204b MS	171
84c7204b MS	172	#define CONFIG_BOARD_EARLY_INIT_R
	173	#define CONFIG_CLOCKS
	174
b72894f1 MS	175	#define ENV_MEM_LAYOUT_SETTINGS \
	176	"fdt_high=10000000\0" \
	177	"initrd_high=10000000\0" \
	178	"fdt_addr_r=0x40000000\0" \
	179	"pxefile_addr_r=0x10000000\0" \
	180	"kernel_addr_r=0x18000000\0" \
	181	"scriptaddr=0x02000000\0" \
	182	"ramdisk_addr_r=0x02100000\0" \
	183
08aa0334	184	#if defined(CONFIG_MMC_SDHCI_ZYNQ)
b72894f1 MS	185	# define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
	186	#else
	187	# define BOOT_TARGET_DEVICES_MMC(func)
	188	#endif
	189
	190	#if defined(CONFIG_SATA_CEVA)
	191	# define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
	192	#else
	193	# define BOOT_TARGET_DEVICES_SCSI(func)
	194	#endif
	195
	196	#if defined(CONFIG_ZYNQMP_USB)
	197	# define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) func(USB, usb, 1)
	198	#else
	199	# define BOOT_TARGET_DEVICES_USB(func)
	200	#endif
	201
	202	#define BOOT_TARGET_DEVICES(func) \
	203	BOOT_TARGET_DEVICES_MMC(func) \
	204	BOOT_TARGET_DEVICES_USB(func) \
	205	BOOT_TARGET_DEVICES_SCSI(func) \
	206	func(PXE, pxe, na) \
	207	func(DHCP, dhcp, na)
	208
	209	#include <config_distro_bootcmd.h>
	210
	211	/* Initial environment variables */
	212	#ifndef CONFIG_EXTRA_ENV_SETTINGS
	213	#define CONFIG_EXTRA_ENV_SETTINGS \
	214	ENV_MEM_LAYOUT_SETTINGS \
	215	BOOTENV \
	216	DFU_ALT_INFO
	217	#endif
	218
d58fc12e MS	219	/* SPL can't handle all huge variables - define just DFU */
	220	#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT)
	221	#undef CONFIG_EXTRA_ENV_SETTINGS
	222	# define CONFIG_EXTRA_ENV_SETTINGS \
	223	"dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \
	224	"atf-uboot.ub ram 0x10000000 0x1000000;" \
	225	"Image ram 0x80000 0x3f80000;" \
	226	"system.dtb ram 0x4000000 0x100000\0" \
	227	"dfu_bufsiz=0x1000\0"
	228	#endif
	229
e6a9ed04	230	#define CONFIG_SPL_TEXT_BASE 0xfffc0000
8fbf678b	231	#define CONFIG_SPL_STACK 0xfffffffc
d58fc12e	232	#define CONFIG_SPL_MAX_SIZE 0x40000
e6a9ed04 MS	233
e6a9ed04 MS	234	/* Just random location in OCM */
8ed31f36 MS	235	#define CONFIG_SPL_BSS_START_ADDR 0x0
8ed31f36 MS	236	#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
e6a9ed04 MS	237
e6a9ed04 MS	238	#define CONFIG_SPL_FRAMEWORK
e6a9ed04	239
24124abe MS	240	#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT)
	241	# define CONFIG_SPL_SPI_LOAD
	242	# define CONFIG_SYS_SPI_KERNEL_OFFS 0x80000
	243	# define CONFIG_SYS_SPI_ARGS_OFFS 0xa0000
	244	# define CONFIG_SYS_SPI_ARGS_SIZE 0xa0000
	245
	246	# define CONFIG_SYS_SPI_U_BOOT_OFFS 0x170000
	247	#endif
	248
e6a9ed04 MS	249	/* u-boot is like dtb */
	250	#define CONFIG_SPL_FS_LOAD_ARGS_NAME "u-boot.bin"
	251	#define CONFIG_SYS_SPL_ARGS_ADDR 0x8000000
	252
	253	/* ATF is my kernel image */
1309f671	254	#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "atf-uboot.ub"
e6a9ed04 MS	255
	256	/* FIT load address for RAM boot */
	257	#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x10000000
	258
	259	/* MMC support */
08aa0334	260	#ifdef CONFIG_MMC_SDHCI_ZYNQ
e6a9ed04 MS	261	# define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
	262	# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* unused */
	263	# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* unused */
	264	# define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0 /* unused */
e6a9ed04 MS	265	# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
	266	#endif
	267
d58fc12e MS	268	#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT)
	269	# undef CONFIG_CMD_BOOTD
	270	# define CONFIG_SPL_ENV_SUPPORT
	271	# define CONFIG_SPL_HASH_SUPPORT
	272	# define CONFIG_ENV_MAX_ENTRIES 10
b45c17c7	273	#endif
d58fc12e	274
b45c17c7 MS	275	#define CONFIG_SYS_SPL_MALLOC_START 0x20000000
b45c17c7 MS	276	#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
d58fc12e MS	277
	278	#ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
	279	# error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used"
	280	#endif
d58fc12e	281
fb4000e8 MS	282	#define CONFIG_BOARD_EARLY_INIT_F
fb4000e8 MS	283
84c7204b	284	#endif /* __XILINX_ZYNQMP_H */