[people/ms/u-boot.git] / include / configs / xilinx_zynqmp.h

/*
 * Configuration for Xilinx ZynqMP
 * (C) Copyright 2014 - 2015 Xilinx, Inc.
 * Michal Simek <michal.simek@xilinx.com>
 *
 * Based on Configuration for Versatile Express
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __XILINX_ZYNQMP_H
#define __XILINX_ZYNQMP_H

#define CONFIG_REMAKE_ELF

/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */

#define CONFIG_SYS_NO_FLASH

/* Generic Interrupt Controller Definitions */
#define CONFIG_GICV2
#define GICD_BASE	0xF9010000
#define GICC_BASE	0xF9020000

#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_SYS_MEMTEST_SCRATCH	0xfffc0000

#ifndef CONFIG_NR_DRAM_BANKS
# define CONFIG_NR_DRAM_BANKS		2
#endif
#define CONFIG_SYS_MEMTEST_START	0
#define CONFIG_SYS_MEMTEST_END		1000

/* Have release address at the end of 256MB for now */
#define CPU_RELEASE_ADDR	0xFFFFFF0

#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE

/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
#if !defined(COUNTER_FREQUENCY)
# define COUNTER_FREQUENCY		100000000
#endif

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 0x2000000)

/* Serial setup */
#define CONFIG_ARM_DCC
#define CONFIG_CPU_ARMV8
#define CONFIG_ZYNQ_SERIAL

#define CONFIG_CONS_INDEX		0
#define CONFIG_BAUDRATE			115200
#define CONFIG_SYS_BAUDRATE_TABLE \
	{ 4800, 9600, 19200, 38400, 57600, 115200 }

/* Command line configuration */
#define CONFIG_CMD_ENV
#define CONFIG_MP

/* BOOTP options */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_MAY_FAIL
#define CONFIG_BOOTP_DNS
#define CONFIG_BOOTP_PXE
#define CONFIG_BOOTP_SUBNETMASK

/* Diff from config_distro_defaults.h */
#define CONFIG_SUPPORT_RAW_INITRD
#if !defined(CONFIG_SPL_BUILD)
#define CONFIG_ENV_VARS_UBOOT_CONFIG
#endif
#define CONFIG_AUTO_COMPLETE

#if defined(CONFIG_ZYNQ_SDHCI)
# define CONFIG_SUPPORT_EMMC_BOOT
# ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
#  define CONFIG_ZYNQ_SDHCI_MAX_FREQ	200000000
# endif
# define CONFIG_ENV_IS_IN_FAT
# define FAT_ENV_DEVICE_AND_PART	"0:auto"
# define FAT_ENV_FILE			"uboot.env"
# define FAT_ENV_INTERFACE		"mmc"
#endif

#if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQMP_USB)
# define CONFIG_FAT_WRITE
#endif

#ifdef CONFIG_NAND_ARASAN
# define CONFIG_CMD_NAND_LOCK_UNLOCK
# define CONFIG_SYS_MAX_NAND_DEVICE	1
# define CONFIG_SYS_NAND_SELF_INIT
# define CONFIG_SYS_NAND_ONFI_DETECTION
# define CONFIG_MTD_DEVICE
#endif

/* Miscellaneous configurable options */
#define CONFIG_SYS_LOAD_ADDR		0x8000000

#if defined(CONFIG_ZYNQMP_USB)
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2

#define CONFIG_SYS_DFU_DATA_BUF_SIZE	0x1800000
#define DFU_DEFAULT_POLL_TIMEOUT	300
#define CONFIG_USB_CABLE_CHECK
#define CONFIG_CMD_THOR_DOWNLOAD
#define CONFIG_USB_FUNCTION_THOR
#define CONFIG_THOR_RESET_OFF
#define DFU_ALT_INFO_RAM \
	"dfu_ram_info=" \
	"setenv dfu_alt_info " \
	"Image ram $kernel_addr $kernel_size\\\\;" \
	"system.dtb ram $fdt_addr $fdt_size\0" \
	"dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
	"thor_ram=run dfu_ram_info && thordown 0 ram 0\0"

#define DFU_ALT_INFO  \
		DFU_ALT_INFO_RAM

#ifndef CONFIG_SPL_BUILD
# define CONFIG_USB_FUNCTION_FASTBOOT
# define CONFIG_CMD_FASTBOOT
# define CONFIG_ANDROID_BOOT_IMAGE
# define CONFIG_FASTBOOT_BUF_ADDR 0x100000
# define CONFIG_FASTBOOT_BUF_SIZE 0x6000000
# define CONFIG_FASTBOOT_FLASH
# ifdef CONFIG_ZYNQ_SDHCI
#  define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
# endif

# define CONFIG_RANDOM_UUID
# define PARTS_DEFAULT \
	"partitions=uuid_disk=${uuid_gpt_disk};" \
	"name=""boot"",size=16M,uuid=${uuid_gpt_boot};" \
	"name=""Linux"",size=-M,uuid=${uuid_gpt_Linux}\0"
#endif
#endif

#if !defined(DFU_ALT_INFO)
# define DFU_ALT_INFO
#endif

#if !defined(PARTS_DEFAULT)
# define PARTS_DEFAULT
#endif

/* Do not preserve environment */
#if !defined(CONFIG_ENV_IS_IN_FAT)
#define CONFIG_ENV_IS_NOWHERE		1
#endif
#define CONFIG_ENV_SIZE			0x8000

/* Monitor Command Prompt */
/* Console I/O Buffer Size */
#define CONFIG_SYS_CBSIZE		2048
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_MAXARGS		64

/* Ethernet driver */
#if defined(CONFIG_ZYNQ_GEM)
# define CONFIG_NET_MULTI
# define CONFIG_MII
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
# define CONFIG_PHY_MARVELL
# define CONFIG_PHY_NATSEMI
# define CONFIG_PHY_TI
# define CONFIG_PHY_GIGE
# define CONFIG_PHY_VITESSE
# define CONFIG_PHY_REALTEK
# define PHY_ANEG_TIMEOUT       20000
#endif

/* I2C */
#if defined(CONFIG_SYS_I2C_ZYNQ)
# define CONFIG_SYS_I2C
# define CONFIG_SYS_I2C_ZYNQ_SPEED		100000
# define CONFIG_SYS_I2C_ZYNQ_SLAVE		0
#endif

/* EEPROM */
#ifdef CONFIG_ZYNQMP_EEPROM
# define CONFIG_CMD_EEPROM
# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
# define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
# define CONFIG_SYS_EEPROM_SIZE			(64 * 1024)
#endif

#ifdef CONFIG_SATA_CEVA
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
#define CONFIG_SYS_SCSI_MAX_LUN		1
#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
					 CONFIG_SYS_SCSI_MAX_LUN)
#define CONFIG_SCSI
#endif

#define CONFIG_SYS_BOOTM_LEN	(60 * 1024 * 1024)

#define CONFIG_CMD_UNZIP

#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_CLOCKS

#define ENV_MEM_LAYOUT_SETTINGS \
	"fdt_high=10000000\0" \
	"initrd_high=10000000\0" \
	"fdt_addr_r=0x40000000\0" \
	"pxefile_addr_r=0x10000000\0" \
	"kernel_addr_r=0x18000000\0" \
	"scriptaddr=0x02000000\0" \
	"ramdisk_addr_r=0x02100000\0" \

#if defined(CONFIG_ZYNQ_SDHCI)
# define BOOT_TARGET_DEVICES_MMC(func)	func(MMC, mmc, 0) func(MMC, mmc, 1)
#else
# define BOOT_TARGET_DEVICES_MMC(func)
#endif

#if defined(CONFIG_SATA_CEVA)
# define BOOT_TARGET_DEVICES_SCSI(func)	func(SCSI, scsi, 0)
#else
# define BOOT_TARGET_DEVICES_SCSI(func)
#endif

#if defined(CONFIG_ZYNQMP_USB)
# define BOOT_TARGET_DEVICES_USB(func)	func(USB, usb, 0) func(USB, usb, 1)
#else
# define BOOT_TARGET_DEVICES_USB(func)
#endif

#define BOOT_TARGET_DEVICES(func) \
	BOOT_TARGET_DEVICES_MMC(func) \
	BOOT_TARGET_DEVICES_USB(func) \
	BOOT_TARGET_DEVICES_SCSI(func) \
	func(PXE, pxe, na) \
	func(DHCP, dhcp, na)

#include <config_distro_bootcmd.h>

/* Initial environment variables */
#ifndef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
	ENV_MEM_LAYOUT_SETTINGS \
	BOOTENV \
	DFU_ALT_INFO
#endif

/* SPL can't handle all huge variables - define just DFU */
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT)
#undef CONFIG_EXTRA_ENV_SETTINGS
# define CONFIG_EXTRA_ENV_SETTINGS \
	"dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \
			  "atf-uboot.ub ram 0x10000000 0x1000000;" \
			  "Image ram 0x80000 0x3f80000;" \
			  "system.dtb ram 0x4000000 0x100000\0" \
	"dfu_bufsiz=0x1000\0"
#endif

#define CONFIG_SPL_TEXT_BASE		0xfffc0000
#define CONFIG_SPL_STACK		0xfffffffc
#define CONFIG_SPL_MAX_SIZE		0x40000

/* Just random location in OCM */
#define CONFIG_SPL_BSS_START_ADDR	0x0
#define CONFIG_SPL_BSS_MAX_SIZE		0x80000

#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT

/* u-boot is like dtb */
#define CONFIG_SPL_FS_LOAD_ARGS_NAME	"u-boot.bin"
#define CONFIG_SYS_SPL_ARGS_ADDR	0x8000000

/* ATF is my kernel image */
#define CONFIG_SPL_FS_LOAD_KERNEL_NAME	"atf-uboot.ub"

/* FIT load address for RAM boot */
#define CONFIG_SPL_LOAD_FIT_ADDRESS	0x10000000

/* MMC support */
#ifdef CONFIG_ZYNQ_SDHCI
# define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0 /* unused */
# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0 /* unused */
# define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0 /* unused */
# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
#endif

#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT)
# undef CONFIG_CMD_BOOTD
# define CONFIG_SPL_ENV_SUPPORT
# define CONFIG_SPL_HASH_SUPPORT
# define CONFIG_ENV_MAX_ENTRIES	10

# define CONFIG_SYS_SPL_MALLOC_START	0x20000000
# define CONFIG_SYS_SPL_MALLOC_SIZE	0x10000000

#ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
# error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used"
#endif
#endif

#endif /* __XILINX_ZYNQMP_H */
Commit	Line	Data
84c7204b MS	1	/*
	2	* Configuration for Xilinx ZynqMP
	3	* (C) Copyright 2014 - 2015 Xilinx, Inc.
	4	* Michal Simek <michal.simek@xilinx.com>
	5	*
	6	* Based on Configuration for Versatile Express
	7	*
	8	* SPDX-License-Identifier: GPL-2.0+
	9	*/
	10
	11	#ifndef __XILINX_ZYNQMP_H
	12	#define __XILINX_ZYNQMP_H
	13
	14	#define CONFIG_REMAKE_ELF
	15
	16	/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
	17
	18	#define CONFIG_SYS_NO_FLASH
	19
84c7204b MS	20	/* Generic Interrupt Controller Definitions */
	21	#define CONFIG_GICV2
	22	#define GICD_BASE 0xF9010000
	23	#define GICC_BASE 0xF9020000
	24
d759512f MS	25	#define CONFIG_SYS_ALT_MEMTEST
	26	#define CONFIG_SYS_MEMTEST_SCRATCH 0xfffc0000
	27
8d59d7f6 MS	28	#ifndef CONFIG_NR_DRAM_BANKS
	29	# define CONFIG_NR_DRAM_BANKS 2
	30	#endif
	31	#define CONFIG_SYS_MEMTEST_START 0
	32	#define CONFIG_SYS_MEMTEST_END 1000
84c7204b MS	33
	34	/* Have release address at the end of 256MB for now */
	35	#define CPU_RELEASE_ADDR 0xFFFFFF0
	36
8fbf678b	37	#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
84c7204b	38
84c7204b	39	/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
713b6164 MS	40	#if !defined(COUNTER_FREQUENCY)
	41	# define COUNTER_FREQUENCY 100000000
	42	#endif
84c7204b MS	43
84c7204b MS	44	/* Size of malloc() pool */
16fa00a7	45	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x2000000)
84c7204b MS	46
84c7204b MS	47	/* Serial setup */
636ac181 MS	48	#define CONFIG_ARM_DCC
	49	#define CONFIG_CPU_ARMV8
	50	#define CONFIG_ZYNQ_SERIAL
84c7204b MS	51
	52	#define CONFIG_CONS_INDEX 0
	53	#define CONFIG_BAUDRATE 115200
	54	#define CONFIG_SYS_BAUDRATE_TABLE \
	55	{ 4800, 9600, 19200, 38400, 57600, 115200 }
	56
	57	/* Command line configuration */
	58	#define CONFIG_CMD_ENV
5cb24200	59	#define CONFIG_MP
84c7204b	60
cb7ea820 MS	61	/* BOOTP options */
	62	#define CONFIG_BOOTP_BOOTFILESIZE
	63	#define CONFIG_BOOTP_BOOTPATH
	64	#define CONFIG_BOOTP_GATEWAY
	65	#define CONFIG_BOOTP_HOSTNAME
	66	#define CONFIG_BOOTP_MAY_FAIL
a1207de0 MS	67	#define CONFIG_BOOTP_DNS
	68	#define CONFIG_BOOTP_PXE
	69	#define CONFIG_BOOTP_SUBNETMASK
a1207de0 MS	70
	71	/* Diff from config_distro_defaults.h */
	72	#define CONFIG_SUPPORT_RAW_INITRD
d58fc12e	73	#if !defined(CONFIG_SPL_BUILD)
a1207de0	74	#define CONFIG_ENV_VARS_UBOOT_CONFIG
d58fc12e	75	#endif
a1207de0 MS	76	#define CONFIG_AUTO_COMPLETE
a1207de0 MS	77
ce0335f2	78	#if defined(CONFIG_ZYNQ_SDHCI)
926782cd	79	# define CONFIG_SUPPORT_EMMC_BOOT
f3bd7280 MS	80	# ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
	81	# define CONFIG_ZYNQ_SDHCI_MAX_FREQ 200000000
	82	# endif
6f09d343 SDPP	83	# define CONFIG_ENV_IS_IN_FAT
	84	# define FAT_ENV_DEVICE_AND_PART "0:auto"
	85	# define FAT_ENV_FILE "uboot.env"
	86	# define FAT_ENV_INTERFACE "mmc"
46f68e68 MS	87	#endif
	88
	89	#if defined(CONFIG_ZYNQ_SDHCI) \|\| defined(CONFIG_ZYNQMP_USB)
84c7204b	90	# define CONFIG_FAT_WRITE
84c7204b MS	91	#endif
84c7204b MS	92
78cb965a	93	#ifdef CONFIG_NAND_ARASAN
78cb965a SDPP	94	# define CONFIG_CMD_NAND_LOCK_UNLOCK
	95	# define CONFIG_SYS_MAX_NAND_DEVICE 1
	96	# define CONFIG_SYS_NAND_SELF_INIT
	97	# define CONFIG_SYS_NAND_ONFI_DETECTION
	98	# define CONFIG_MTD_DEVICE
	99	#endif
	100
84c7204b MS	101	/* Miscellaneous configurable options */
	102	#define CONFIG_SYS_LOAD_ADDR 0x8000000
	103
16fa00a7	104	#if defined(CONFIG_ZYNQMP_USB)
0f676767	105	#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
0f676767	106
16fa00a7 SDPP	107	#define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000
16fa00a7 SDPP	108	#define DFU_DEFAULT_POLL_TIMEOUT 300
16fa00a7	109	#define CONFIG_USB_CABLE_CHECK
16fa00a7 SDPP	110	#define CONFIG_CMD_THOR_DOWNLOAD
	111	#define CONFIG_USB_FUNCTION_THOR
	112	#define CONFIG_THOR_RESET_OFF
	113	#define DFU_ALT_INFO_RAM \
	114	"dfu_ram_info=" \
0e43140b	115	"setenv dfu_alt_info " \
1b19daf4 SDPP	116	"Image ram $kernel_addr $kernel_size\\\\;" \
1b19daf4 SDPP	117	"system.dtb ram $fdt_addr $fdt_size\0" \
16fa00a7 SDPP	118	"dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
	119	"thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
	120
	121	#define DFU_ALT_INFO \
	122	DFU_ALT_INFO_RAM
5ce987fe SDPP	123
	124	#ifndef CONFIG_SPL_BUILD
	125	# define CONFIG_USB_FUNCTION_FASTBOOT
	126	# define CONFIG_CMD_FASTBOOT
	127	# define CONFIG_ANDROID_BOOT_IMAGE
	128	# define CONFIG_FASTBOOT_BUF_ADDR 0x100000
	129	# define CONFIG_FASTBOOT_BUF_SIZE 0x6000000
	130	# define CONFIG_FASTBOOT_FLASH
	131	# ifdef CONFIG_ZYNQ_SDHCI
	132	# define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
	133	# endif
5ce987fe SDPP	134
	135	# define CONFIG_RANDOM_UUID
	136	# define PARTS_DEFAULT \
	137	"partitions=uuid_disk=${uuid_gpt_disk};" \
	138	"name=""boot"",size=16M,uuid=${uuid_gpt_boot};" \
	139	"name=""Linux"",size=-M,uuid=${uuid_gpt_Linux}\0"
	140	#endif
16fa00a7 SDPP	141	#endif
	142
	143	#if !defined(DFU_ALT_INFO)
	144	# define DFU_ALT_INFO
	145	#endif
	146
5ce987fe SDPP	147	#if !defined(PARTS_DEFAULT)
	148	# define PARTS_DEFAULT
	149	#endif
	150
84c7204b	151	/* Do not preserve environment */
6f09d343	152	#if !defined(CONFIG_ENV_IS_IN_FAT)
84c7204b	153	#define CONFIG_ENV_IS_NOWHERE 1
6f09d343	154	#endif
936b0384	155	#define CONFIG_ENV_SIZE 0x8000
84c7204b MS	156
	157	/* Monitor Command Prompt */
	158	/* Console I/O Buffer Size */
	159	#define CONFIG_SYS_CBSIZE 2048
84c7204b MS	160	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
84c7204b MS	161	sizeof(CONFIG_SYS_PROMPT) + 16)
84c7204b MS	162	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	163	#define CONFIG_SYS_LONGHELP
	164	#define CONFIG_CMDLINE_EDITING
	165	#define CONFIG_SYS_MAXARGS 64
	166
cb7ea820	167	/* Ethernet driver */
596e5782	168	#if defined(CONFIG_ZYNQ_GEM)
cb7ea820	169	# define CONFIG_NET_MULTI
cb7ea820 MS	170	# define CONFIG_MII
cb7ea820 MS	171	# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
cb7ea820	172	# define CONFIG_PHY_MARVELL
f96fe2c0	173	# define CONFIG_PHY_NATSEMI
bf146325	174	# define CONFIG_PHY_TI
c4c96f2b	175	# define CONFIG_PHY_GIGE
a1a6af82 MS	176	# define CONFIG_PHY_VITESSE
a1a6af82 MS	177	# define CONFIG_PHY_REALTEK
e2928f32	178	# define PHY_ANEG_TIMEOUT 20000
cb7ea820 MS	179	#endif
cb7ea820 MS	180
2594e03c SDPP	181	/* I2C */
2594e03c SDPP	182	#if defined(CONFIG_SYS_I2C_ZYNQ)
2594e03c SDPP	183	# define CONFIG_SYS_I2C
	184	# define CONFIG_SYS_I2C_ZYNQ_SPEED 100000
	185	# define CONFIG_SYS_I2C_ZYNQ_SLAVE 0
	186	#endif
	187
2594e03c SDPP	188	/* EEPROM */
	189	#ifdef CONFIG_ZYNQMP_EEPROM
	190	# define CONFIG_CMD_EEPROM
	191	# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
	192	# define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
	193	# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
	194	# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
	195	# define CONFIG_SYS_EEPROM_SIZE (64 * 1024)
	196	#endif
	197
0d169b8c	198	#ifdef CONFIG_SATA_CEVA
6fe6f135 MS	199	#define CONFIG_LIBATA
6fe6f135 MS	200	#define CONFIG_SCSI_AHCI
679b994a	201	#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
6fe6f135 MS	202	#define CONFIG_SYS_SCSI_MAX_LUN 1
	203	#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
	204	CONFIG_SYS_SCSI_MAX_LUN)
c649e3c9	205	#define CONFIG_SCSI
6fe6f135 MS	206	#endif
6fe6f135 MS	207
84c7204b MS	208	#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
84c7204b MS	209
84c7204b MS	210	#define CONFIG_CMD_UNZIP
	211
	212	#define CONFIG_BOARD_EARLY_INIT_R
	213	#define CONFIG_CLOCKS
	214
b72894f1 MS	215	#define ENV_MEM_LAYOUT_SETTINGS \
	216	"fdt_high=10000000\0" \
	217	"initrd_high=10000000\0" \
	218	"fdt_addr_r=0x40000000\0" \
	219	"pxefile_addr_r=0x10000000\0" \
	220	"kernel_addr_r=0x18000000\0" \
	221	"scriptaddr=0x02000000\0" \
	222	"ramdisk_addr_r=0x02100000\0" \
	223
	224	#if defined(CONFIG_ZYNQ_SDHCI)
	225	# define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
	226	#else
	227	# define BOOT_TARGET_DEVICES_MMC(func)
	228	#endif
	229
	230	#if defined(CONFIG_SATA_CEVA)
	231	# define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
	232	#else
	233	# define BOOT_TARGET_DEVICES_SCSI(func)
	234	#endif
	235
	236	#if defined(CONFIG_ZYNQMP_USB)
	237	# define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) func(USB, usb, 1)
	238	#else
	239	# define BOOT_TARGET_DEVICES_USB(func)
	240	#endif
	241
	242	#define BOOT_TARGET_DEVICES(func) \
	243	BOOT_TARGET_DEVICES_MMC(func) \
	244	BOOT_TARGET_DEVICES_USB(func) \
	245	BOOT_TARGET_DEVICES_SCSI(func) \
	246	func(PXE, pxe, na) \
	247	func(DHCP, dhcp, na)
	248
	249	#include <config_distro_bootcmd.h>
	250
	251	/* Initial environment variables */
	252	#ifndef CONFIG_EXTRA_ENV_SETTINGS
	253	#define CONFIG_EXTRA_ENV_SETTINGS \
	254	ENV_MEM_LAYOUT_SETTINGS \
	255	BOOTENV \
	256	DFU_ALT_INFO
	257	#endif
	258
d58fc12e MS	259	/* SPL can't handle all huge variables - define just DFU */
	260	#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT)
	261	#undef CONFIG_EXTRA_ENV_SETTINGS
	262	# define CONFIG_EXTRA_ENV_SETTINGS \
	263	"dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \
	264	"atf-uboot.ub ram 0x10000000 0x1000000;" \
	265	"Image ram 0x80000 0x3f80000;" \
	266	"system.dtb ram 0x4000000 0x100000\0" \
	267	"dfu_bufsiz=0x1000\0"
	268	#endif
	269
e6a9ed04	270	#define CONFIG_SPL_TEXT_BASE 0xfffc0000
8fbf678b	271	#define CONFIG_SPL_STACK 0xfffffffc
d58fc12e	272	#define CONFIG_SPL_MAX_SIZE 0x40000
e6a9ed04 MS	273
e6a9ed04 MS	274	/* Just random location in OCM */
8ed31f36 MS	275	#define CONFIG_SPL_BSS_START_ADDR 0x0
8ed31f36 MS	276	#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
e6a9ed04 MS	277
e6a9ed04 MS	278	#define CONFIG_SPL_FRAMEWORK
e6a9ed04	279	#define CONFIG_SPL_BOARD_INIT
e6a9ed04	280
e6a9ed04 MS	281	/* u-boot is like dtb */
	282	#define CONFIG_SPL_FS_LOAD_ARGS_NAME "u-boot.bin"
	283	#define CONFIG_SYS_SPL_ARGS_ADDR 0x8000000
	284
	285	/* ATF is my kernel image */
1309f671	286	#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "atf-uboot.ub"
e6a9ed04 MS	287
	288	/* FIT load address for RAM boot */
	289	#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x10000000
	290
	291	/* MMC support */
	292	#ifdef CONFIG_ZYNQ_SDHCI
e6a9ed04 MS	293	# define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
	294	# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* unused */
	295	# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* unused */
	296	# define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0 /* unused */
e6a9ed04 MS	297	# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
	298	#endif
	299
d58fc12e MS	300	#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT)
	301	# undef CONFIG_CMD_BOOTD
	302	# define CONFIG_SPL_ENV_SUPPORT
	303	# define CONFIG_SPL_HASH_SUPPORT
	304	# define CONFIG_ENV_MAX_ENTRIES 10
	305
	306	# define CONFIG_SYS_SPL_MALLOC_START 0x20000000
	307	# define CONFIG_SYS_SPL_MALLOC_SIZE 0x10000000
	308
	309	#ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
	310	# error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used"
	311	#endif
	312	#endif
	313
84c7204b	314	#endif /* __XILINX_ZYNQMP_H */