Manual pages: mount.8: Miscellaneous wording, grammar, and formatting fixes

[thirdparty/util-linux.git] / sys-utils / mount.8

.\" Copyright (c) 1996-2004 Andries Brouwer
.\" Copyright (C) 2006-2012 Karel Zak <kzak@redhat.com>
.\"
.\" This page is somewhat derived from a page that was
.\" (c) 1980, 1989, 1991 The Regents of the University of California
.\" and had been heavily modified by Rik Faith and myself.
.\" (Probably no BSD text remains.)
.\" Fragments of text were written by Werner Almesberger, Remy Card,
.\" Stephen Tweedie and Eric Youngdale.
.\"
.\" This is free documentation; you can redistribute it and/or
.\" modify it under the terms of the GNU General Public License as
.\" published by the Free Software Foundation; either version 2 of
.\" the License, or (at your option) any later version.
.\"
.\" The GNU General Public License's references to "object code"
.\" and "executables" are to be interpreted as the output of any
.\" document formatting or typesetting system, including
.\" intermediate and printed output.
.\"
.\" This manual is distributed in the hope that it will be useful,
.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
.\" GNU General Public License for more details.
.\"
.\" You should have received a copy of the GNU General Public License along
.\" with this program; if not, write to the Free Software Foundation, Inc.,
.\" 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
.\"
.TH MOUNT 8 "August 2015" "util-linux" "System Administration"
.SH NAME
mount \- mount a filesystem
.SH SYNOPSIS
.B mount
.RB [ \-l | \-h | \-V ]
.LP
.B mount \-a
.RB [ \-fFnrsvw ]
.RB [ \-t
.IR fstype ]
.RB [ \-O
.IR optlist ]
.LP
.B mount
.RB [ \-fnrsvw ]
.RB [ \-o
.IR options ]
.IR device | dir
.LP
.B mount
.RB [ \-fnrsvw ]
.RB [ \-t
.IB fstype ]
.RB [ \-o
.IR options ]
.I device dir
.SH DESCRIPTION
All files accessible in a Unix system are arranged in one big
tree, the file hierarchy, rooted at
.IR / .
These files can be spread out over several devices.  The
.B mount
command serves to attach the filesystem found on some device
to the big file tree.  Conversely, the
.BR umount (8)
command will detach it again.  The filesystem is used to control how data is
stored on the device or provided in a virtual way by network or other services.

The standard form of the
.B mount
command is:
.RS

.br
.BI "mount \-t" " type device dir"
.br

.RE
This tells the kernel to attach the filesystem found on
.I device
(which is of type
.IR type )
at the directory
.IR dir .
The option \fB\-t \fItype\fR is optional.  The
.B mount
command is usually able to detect a filesystem.  The root permissions are necessary
to mount a filesystem by default.  See section "Non-superuser mounts" below for more details.
The previous contents (if any) and owner and mode of
.I dir
become invisible, and as long as this filesystem remains mounted,
the pathname
.I dir
refers to the root of the filesystem on
.IR device .

If only the directory or the device is given, for example:
.RS
.sp
.B mount /dir
.sp
.RE
then \fBmount\fR looks for a mountpoint (and if not found then for a device) in the
.I /etc/fstab
file.  It's possible to use the
.B \-\-target
or
.B \-\-source
options to avoid ambiguous interpretation of the given argument.
For example:
.RS
.sp
.B mount \-\-target /mountpoint
.sp
.RE

The same filesystem may be mounted more than once, and in some cases (e.g.,
network filesystems) the same filesystem may be mounted on the same
mountpoint multiple times. The
.B mount
command does not implement any policy to
control this behavior. All behavior is controlled by the kernel and it is usually
specific to the filesystem driver. The exception is \fB\-\-all\fR, in this case
already mounted filesystems are ignored (see \fB\-\-all\fR below for more details).

.SS Listing the mounts
The listing mode is maintained for backward compatibility only.

For more robust and customizable output use
.BR findmnt (8),
\fBespecially in your scripts\fP.  Note that control characters in the
mountpoint name are replaced with '?'.

The following command lists all mounted filesystems (of type
.IR type ):
.RS
.sp
.BR "mount " [ \-l "] [" "\-t \fItype\/\fP" ]
.sp
.RE
The option \fB\-l\fR adds labels to this listing.  See below.

.SS Indicating the device and filesystem
Most devices are indicated by a filename (of a block special device), like
.IR /dev/sda1 ,
but there are other possibilities.  For example, in the case of an NFS mount,
.I device
may look like
.IR knuth.cwi.nl:/dir .
It is also possible to indicate a block special device using its filesystem label
or UUID (see the \fB\-L\fR and \fB\-U\fR options below), or its partition label
or UUID.  Partition identifiers are supported for example for GUID Partition
Tables (GPT).

The device names of disk partitions are unstable; hardware reconfiguration,
and adding or removing a device can cause changes in names.
This is the reason why it's
strongly recommended to use filesystem or partition identifiers like UUID or
LABEL.

The command \fBlsblk \-\-fs\fR provides an overview of filesystems, LABELs and UUIDs
on available block devices.  The command \fBblkid \-p <device>\fR provides details about
a filesystem on the specified device.

Don't forget that there is no guarantee that UUIDs and labels are really
unique, especially if you move, share or copy the device.  Use
.B "lsblk \-o +UUID,PARTUUID"
to verify that the UUIDs are really unique in your system.

The recommended setup is to use tags (e.g.\& \fBUUID=\fIuuid\fR) rather than
.I /dev/disk/by-{label,uuid,partuuid,partlabel}
udev symlinks in the
.I /etc/fstab
file.  Tags are
more readable, robust and portable.  The
.BR mount (8)
command internally uses udev
symlinks, so the use of symlinks in
.I /etc/fstab
has no advantage over tags.
For more details see
.BR libblkid (3).

Note that
.BR mount (8)
uses UUIDs as strings.  The UUIDs from the command line or from
.BR fstab (5)
are not converted to internal binary representation.  The string representation
of the UUID should be based on lower case characters.

The
.I proc
filesystem is not associated with a special device, and when
mounting it, an arbitrary keyword\(emfor example,
.IR proc \(emcan
be used instead of a device specification.
(The customary choice
.I none
is less fortunate: the error message `none already mounted' from
.B mount
can be confusing.)

.SS The files /etc/fstab, /etc/mtab and /proc/mounts
The file
.I /etc/fstab
(see
.BR fstab (5)),
may contain lines describing what devices are usually
mounted where, using which options.  The default location of the
.BR fstab (5)
file can be overridden with the
.BI \-\-fstab " path"
command-line option (see below for more details).
.LP
The command
.RS
.sp
.B mount \-a
.RB [ \-t
.IR type ]
.RB [ \-O
.IR optlist ]
.sp
.RE
(usually given in a bootscript) causes all filesystems mentioned in
.I fstab
(of the proper type and/or having or not having the proper options)
to be mounted as indicated, except for those whose line contains the
.B noauto
keyword.  Adding the
.B \-F
option will make \fBmount\fR fork, so that the
filesystems are mounted in parallel.
.LP
When mounting a filesystem mentioned in
.I fstab
or
.IR mtab ,
it suffices to specify on the command line only the device, or only the mount point.
.sp
The programs
.B mount
and
.B umount
traditionally maintained a list of currently mounted filesystems in the file
.IR /etc/mtab .
The support for regular classic
.I /etc/mtab
is completely disabled at compile time by default, because on current Linux
systems it is better to make
.I /etc/mtab
a symlink to
.I /proc/mounts
instead. The regular
.I mtab
file maintained in userspace cannot reliably
work with namespaces, containers and other advanced Linux features.
If the regular
.I mtab
support is enabled, then it's possible to
use the file as well as the symlink.
.sp
If no arguments are given to
.BR mount ,
the list of mounted filesystems is printed.
.sp
If you want to override mount options from
.IR /etc/fstab ,
you have to use the \fB\-o\fR option:
.RS
.sp
.BI mount " device" \fR| "dir " \-o " options"
.sp
.RE
and then the mount options from the command line will be appended to
the list of options from
.IR /etc/fstab .
This default behaviour can be changed using the
\fB\-\-options\-mode\fR
command-line option.
The usual behavior is that the last option wins if there are conflicting
ones.
.sp
The
.B mount
program does not read the
.I /etc/fstab
file if both
.I device
(or LABEL, UUID, PARTUUID or PARTLABEL) and
.I dir
are specified.  For example, to mount device
.BR foo " at " /dir :
.RS
.sp
.B "mount /dev/foo /dir"
.sp
.RE
This default behaviour can be changed by using the
\fB\-\-options\-source\-force\fR command-line option
to always read configuration from
.IR fstab .
For non-root users
.B mount
always reads the
.I fstab
configuration.

.SS Non-superuser mounts
Normally, only the superuser can mount filesystems.
However, when
.I fstab
contains the
.B user
option on a line, anybody can mount the corresponding filesystem.
.LP
Thus, given a line
.RS
.sp
.B "/dev/cdrom  /cd  iso9660  ro,user,noauto,unhide"
.sp
.RE
any user can mount the iso9660 filesystem found on an inserted CDROM
using the command:
.PP
.RS
.B "mount /cd"
.sp
.RE
Note that \fBmount\fR is very strict about non-root users and all paths
specified on command line are verified before
.I fstab
is parsed or a helper
program is executed. It's strongly recommended to use a valid mountpoint to
specify filesystem, otherwise \fBmount\fR may fail. For example it's a bad idea
to use NFS or CIFS source on command line.
.PP
Since util-linux 2.35, \fBmount\fR does not exit when user permissions are
inadequate according to libmount's internal security rules.
Instead, it drops suid permissions
and continues as regular non-root user. This behavior supports use-cases where
root permissions are not necessary (e.g., fuse filesystems, user namespaces,
etc).
.PP
For more details, see
.BR fstab (5).
Only the user that mounted a filesystem can unmount it again.
If any user should be able to unmount it, then use
.B users
instead of
.B user
in the
.I fstab
line.
The
.B owner
option is similar to the
.B user
option, with the restriction that the user must be the owner
of the special file.  This may be useful e.g.\& for
.I /dev/fd
if a login script makes the console user owner of this device.
The
.B group
option is similar, with the restriction that the user must be a
member of the group of the special file.

.SS Bind mount operation
Remount part of the file hierarchy somewhere else.  The call is:

.RS
.br
.B mount \-\-bind
.I olddir newdir
.RE

or by using this
.I fstab
entry:

.RS
.br
.BI / olddir
.BI / newdir
.B none bind
.RE

After this call the same contents are accessible in two places.

It is important to understand that "bind" does not create any second-class
or special node in the kernel VFS. The "bind" is just another operation to
attach a filesystem. There is nowhere stored information that the filesystem
has been attached by a "bind" operation. The \fIolddir\fR and \fInewdir\fR are
independent and the \fIolddir\fR may be unmounted.

One can also remount a single file (on a single file).  It's also
possible to use a bind mount to create a mountpoint from a regular
directory, for example:

.RS
.br
.B mount \-\-bind foo foo
.RE

The bind mount call attaches only (part of) a single filesystem, not possible
submounts.  The entire file hierarchy including submounts can be attached
a second place by using:

.RS
.br
.B mount \-\-rbind
.I olddir newdir
.RE

Note that the filesystem mount options maintained by the kernel will remain the same as those
on the original mount point.  The userspace mount options (e.g., _netdev) will not be copied
by
.BR mount
and it's necessary to explicitly specify the options on the
.B mount
command line.

Since util-linux 2.27
.BR mount (8)
permits changing the mount options by passing the
relevant options along with
.BR \-\-bind .
For example:

.RS
.br
.B mount \-o bind,ro foo foo
.RE

This feature is not supported by the Linux kernel; it is implemented in userspace
by an additional \fBmount\fR(2) remounting system call.
This solution is not atomic.

The alternative (classic) way to create a read-only bind mount is to use the remount
operation, for example:

.RS
.br
.B mount \-\-bind
.I olddir newdir
.br
.B mount \-o remount,bind,ro
.I olddir newdir
.RE

Note that a read-only bind will create a read-only mountpoint (VFS entry),
but the original filesystem superblock will still be writable, meaning that the
.I olddir
will be writable, but the
.I newdir
will be read-only.

It's also possible to change nosuid, nodev, noexec, noatime, nodiratime and
relatime VFS entry flags via a "remount,bind" operation.
The other flags (for example
filesystem-specific flags) are silently ignored.  It's impossible to change mount
options recursively (for example with \fB\-o rbind,ro\fR).

Since util-linux 2.31,
.BR mount
ignores the \fBbind\fR flag from
.I /etc/fstab
on a
.B remount
operation
(if "\-o remount" is specified on command line).
This is necessary to fully control
mount options on remount by command line. In previous versions the bind
flag has been always applied and it was impossible to re-define mount options
without interaction with the bind semantic. This
.BR mount (8)
behavior does not affect situations when "remount,bind" is specified in the
.I /etc/fstab
file.

.SS The move operation
Move a
.B mounted tree
to another place (atomically).  The call is:

.RS
.br
.B mount \-\-move
.I olddir newdir
.RE

This will cause the contents which previously appeared under
.I olddir
to now be accessible under
.IR newdir .
The physical location of the files is not changed.
Note that
.I olddir
has to be a mountpoint.

Note also that moving a mount residing under a shared mount is invalid and
unsupported.  Use
.B findmnt \-o TARGET,PROPAGATION
to see the current propagation flags.

.SS Shared subtree operations
Since Linux 2.6.15 it is possible to mark a mount and its submounts as shared,
private, slave or unbindable.  A shared mount provides the ability to create mirrors
of that mount such that mounts and unmounts within any of the mirrors propagate
to the other mirror.  A slave mount receives propagation from its master, but
not vice versa.  A private mount carries no propagation abilities.  An
unbindable mount is a private mount which cannot be cloned through a bind
operation.  The detailed semantics are documented in
.I Documentation/filesystems/sharedsubtree.txt
file in the kernel source tree; see also
.BR mount_namespaces (7).

Supported operations are:

.RS
.nf
.BI "mount \-\-make\-shared " mountpoint
.BI "mount \-\-make\-slave " mountpoint
.BI "mount \-\-make\-private " mountpoint
.BI "mount \-\-make\-unbindable " mountpoint
.fi
.RE

The following commands allow one to recursively change the type of all the
mounts under a given mountpoint.

.RS
.nf
.BI "mount \-\-make\-rshared " mountpoint
.BI "mount \-\-make\-rslave " mountpoint
.BI "mount \-\-make\-rprivate " mountpoint
.BI "mount \-\-make\-runbindable " mountpoint
.fi
.RE

.BR mount (8)
.B does not read
.BR fstab (5)
when a \fB\-\-make-\fR* operation is requested.  All necessary information has to be
specified on the command line.

Note that the Linux kernel does not allow changing multiple propagation flags
with a single
.BR mount (2)
system call, and the flags cannot be mixed with other mount options and operations.

Since util-linux 2.23 the \fBmount\fR command allows to do more propagation
(topology) changes by one mount(8) call and do it also together with other
mount operations.  This feature is EXPERIMENTAL.  The propagation flags are applied
by additional \fBmount\fR(2) system calls when the preceding mount operations
were successful.  Note that this use case is not atomic.  It is possible to
specify the propagation flags in
.BR fstab (5)
as mount options
.RB ( private ,
.BR slave ,
.BR shared ,
.BR unbindable ,
.BR rprivate ,
.BR rslave ,
.BR rshared ,
.BR runbindable ).

For example:

.RS
.nf
.B mount \-\-make\-private \-\-make\-unbindable /dev/sda1 /foo
.fi
.RE

is the same as:

.RS
.nf
.B mount /dev/sda1 /foo
.B mount \-\-make\-private /foo
.B mount \-\-make\-unbindable /foo
.fi
.RE

.SH COMMAND-LINE OPTIONS
The full set of mount options used by an invocation of
.B mount
is determined by first extracting the
mount options for the filesystem from the
.I fstab
table, then applying any options specified by the
.B \-o
argument, and finally applying a
.BR \-r " or " \-w
option, when present.

The \fBmount\fR command does not pass all command-line options to the
\fB/sbin/mount.\fIsuffix\fR mount helpers.  The interface between \fBmount\fR
and the mount helpers is described below in the section \fBEXTERNAL HELPERS\fR.
.sp
Command-line options available for the
.B mount
command are:
.TP
.BR \-a , " \-\-all"
Mount all filesystems (of the given types) mentioned in
.I fstab
(except for those whose line contains the
.B noauto
keyword).  The filesystems are mounted following their order in
.IR fstab .
The
.B mount
command compares filesystem source, target (and fs root for bind
mount or btrfs) to detect already mounted filesystems. The kernel table with
already mounted filesystems is cached during \fBmount \-\-all\fR. This means
that all duplicated
.I fstab
entries will be mounted.
.sp
The option \fB\-\-all\fR is possible to use for remount operation too. In this
case all filters (\fB\-t\fR and \fB\-O\fR) are applied to the table of already
mounted filesystems.
.sp
Since version 2.35 is possible to use the command line option \fB\-o\fR to
alter mount options from
.I fstab
(see also \fB\-\-options\-mode\fR).
.sp
Note that it is a bad practice to use \fBmount \-a\fR for
.I fstab
checking. The recommended solution is \fBfindmnt \-\-verify\fR.
.TP
.BR \-B , " \-\-bind"
Remount a subtree somewhere else (so that its contents are available
in both places).  See above, under \fBBind mounts\fR.
.TP
.BR \-c , " \-\-no\-canonicalize"
Don't canonicalize paths.  The
.B mount
command canonicalizes all paths
(from the command line or
.IR fstab )
by default.  This option can be used
together with the
.B \-f
flag for already canonicalized absolute paths.  The option is designed for mount
helpers which call \fBmount \-i\fR.  It is strongly recommended to not use this
command-line option for normal mount operations.
.sp
Note that \fBmount\fR(8) does not pass this option to the
\fB/sbin/mount.\fItype\fR helpers.
.TP
.BR \-F , " \-\-fork"
(Used in conjunction with
.BR \-a .)
Fork off a new incarnation of \fBmount\fR for each device.
This will do the mounts on different devices or different NFS servers
in parallel.
This has the advantage that it is faster; also NFS timeouts proceed in
parallel.
A disadvantage is that the order of the mount operations is undefined.
Thus, you cannot use this option if you want to mount both
.I /usr
and
.IR /usr/spool .
.IP "\fB\-f, \-\-fake\fP"
Causes everything to be done except for the actual system call; if it's not
obvious, this ``fakes'' mounting the filesystem.  This option is useful in
conjunction with the
.B \-v
flag to determine what the
.B mount
command is trying to do.  It can also be used to add entries for devices
that were mounted earlier with the \fB\-n\fR option.  The \fB\-f\fR option
checks for an existing record in
.I /etc/mtab
and fails when the record already
exists (with a regular non-fake mount, this check is done by the kernel).
.IP "\fB\-i, \-\-internal\-only\fP"
Don't call the \fB/sbin/mount.\fIfilesystem\fR helper even if it exists.
.TP
.BR \-L , " \-\-label " \fIlabel
Mount the partition that has the specified
.IR label .
.TP
.BR \-l , " \-\-show\-labels"
Add the labels in the mount output.  \fBmount\fR must have
permission to read the disk device (e.g.\& be set-user-ID root) for this to work.
One can set such a label for ext2, ext3 or ext4 using the
.BR e2label (8)
utility, or for XFS using
.BR xfs_admin (8),
or for reiserfs using
.BR reiserfstune (8).
.TP
.BR \-M , " \-\-move"
Move a subtree to some other place.  See above, the subsection
\fBThe move operation\fR.
.TP
.BR \-n , " \-\-no\-mtab"
Mount without writing in
.IR /etc/mtab .
This is necessary for example when
.I /etc
is on a read-only filesystem.
.TP
.BR \-N , " \-\-namespace " \fIns
Perform the mount operation in the mount namespace specified by \fIns\fR.
\fIns\fR is either PID of process running in that namespace
or special file representing that namespace.
.sp
.BR mount (8)
switches to the mount namespace when it reads
.IR /etc/fstab ,
writes
.I /etc/mtab
(or writes to
.IR /run/mount )
and calls the
.BR mount (2)
system call, otherwise it runs in the original mount namespace.
This means that the target namespace does not have
to contain any libraries or other requirements necessary to execute the
.BR mount (2)
call.
.sp
See \fBmount_namespaces\fR(7) for more information.
.TP
.BR \-O , " \-\-test\-opts " \fIopts
Limit the set of filesystems to which the
.B \-a
option applies.  In this regard it is like the
.B \-t
option except that
.B \-O
is useless without
.BR \-a .
For example, the command:
.RS
.RS
.sp
.B "mount \-a \-O no_netdev"
.sp
.RE
mounts all filesystems except those which have the option
.I _netdev
specified in the options field in the
.I /etc/fstab
file.

It is different from
.B \-t
in that each option is matched exactly; a leading
.B no
at the beginning of one option does not negate the rest.

The
.B \-t
and
.B \-O
options are cumulative in effect; that is, the command
.RS
.sp
.B "mount \-a \-t ext2 \-O _netdev"
.sp
.RE
mounts all ext2 filesystems with the _netdev option, not all filesystems
that are either ext2 or have the _netdev option specified.
.RE
.TP
.BR \-o , " \-\-options " \fIopts
Use the specified mount options.  The \fIopts\fR argument is
a comma-separated list.  For example:
.RS
.RS
.sp
.B "mount LABEL=mydisk \-o noatime,nodev,nosuid"
.sp
.RE

For more details, see the
.B FILESYSTEM-INDEPENDENT MOUNT OPTIONS
and
.B FILESYSTEM-SPECIFIC MOUNT OPTIONS
sections.
.RE

.TP
.BR "\-\-options\-mode " \fImode
Controls how to combine options from
.IR fstab / mtab
with options from the command line.
\fImode\fR can be one of
.BR ignore ", " append ", " prepend " or " replace .
For example, \fBappend\fR means that options from
.I fstab
are appended to options from the command line.
The default value is \fBprepend\fR -- it means command line options are evaluated after
.I fstab
options.
Note that the last option wins if there are conflicting ones.

.TP
.BR "\-\-options\-source " \fIsource
Source of default options.
\fIsource\fR is a comma-separated list of
.BR fstab ", " mtab " and " disable .
\fBdisable\fR disables
.BR fstab " and " mtab
and disables \fB\-\-options\-source\-force\fR.
The default value is \fBfstab,mtab\fR.

.TP
.B \-\-options\-source\-force
Use options from
.IR fstab / mtab
even if both \fIdevice\fR and \fIdir\fR are specified.

.TP
.BR \-R , " \-\-rbind"
Remount a subtree and all possible submounts somewhere else (so that its
contents are available in both places).  See above, the subsection
\fBBind mounts\fR.
.TP
.BR \-r , " \-\-read\-only"
Mount the filesystem read-only.  A synonym is
.BR "\-o ro" .
.sp
Note that, depending on the filesystem type, state and kernel behavior, the
system may still write to the device.  For example, ext3 and ext4 will replay the
journal if the filesystem is dirty.  To prevent this kind of write access, you
may want to mount an ext3 or ext4 filesystem with the \fBro,noload\fR mount
options or set the block device itself to read-only mode, see the
.BR blockdev (8)
command.
.TP
.B \-s
Tolerate sloppy mount options rather than failing.  This will ignore mount
options not supported by a filesystem type.  Not all filesystems support this
option.  Currently it's supported by the \fBmount.nfs\fR mount helper only.
.TP
.BI \-\-source " device"
If only one argument for the mount command is given, then the argument might be
interpreted as the target (mountpoint) or source (device).
This option allows you to
explicitly define that the argument is the mount source.
.TP
.BI \-\-target " directory"
If only one argument for the mount command is given, then the argument might be
interpreted as the target (mountpoint) or source (device).
This option allows you to
explicitly define that the argument is the mount target.
.TP
.BI \-\-target\-prefix " directory"
Prepend the specified directory to all mount targets.
This option allows to follow
.IR fstab ,
but mount operations is done on another place, for example:
.RS
.RS
.sp
.B "mount \-\-all \-\-target\-prefix /chroot \-o X\-mount.mkdir
.sp
.RE
mounts all from system
.I fstab
to
.IR /chroot ,
all missing mountpoint are created
(due to X-mount.mkdir).  See also \fB\-\-fstab\fP to use an alternative
.IR fstab .
.RE
.TP
.BR \-T , " \-\-fstab " \fIpath
Specifies an alternative
.I fstab
file.
If \fIpath\fP is a directory, then the files
in the directory are sorted by
.BR strverscmp (3);
files that start with "."\& or without an
.I \&.fstab
extension are ignored.  The option
can be specified more than once.  This option is mostly designed for initramfs
or chroot scripts where additional configuration is specified beyond standard
system configuration.
.sp
Note that \fBmount\fR(8) does not pass the option \fB\-\-fstab\fP to the
\fB/sbin/mount.\fItype\fR helpers, meaning that the alternative
.I fstab
files will be
invisible for the helpers.  This is no problem for normal mounts, but user
(non-root) mounts always require
.I fstab
to verify the user's rights.
.TP
.BR \-t , " \-\-types " \fIfstype
The argument following the
.B \-t
is used to indicate the filesystem type.  The filesystem types which are
currently supported depend on the running kernel.  See
.I /proc/filesystems
and
.I /lib/modules/$(uname \-r)/kernel/fs
for a complete list of the filesystems.  The most common are ext2, ext3, ext4,
xfs, btrfs, vfat, sysfs, proc, nfs and cifs.
.sp
The programs
.B mount
and
.B umount
support filesystem subtypes.  The subtype is defined by a '.subtype' suffix.  For
example  'fuse.sshfs'.  It's recommended to use subtype notation rather than add
any prefix to the mount source (for example 'sshfs#example.com' is
deprecated).

If no
.B \-t
option is given, or if the
.B auto
type is specified,
.B mount
will try to guess the desired type.
Mount uses the blkid library for guessing the filesystem
type; if that does not turn up anything that looks familiar,
.B mount
will try to read the file
.IR /etc/filesystems ,
or, if that does not exist,
.IR /proc/filesystems .
All of the filesystem types listed there will be tried,
except for those that are labeled "nodev" (e.g.\&
.IR devpts ,
.I proc
and
.IR nfs ).
If
.I /etc/filesystems
ends in a line with a single *, mount will read
.I /proc/filesystems
afterwards.  While trying, all filesystem types will be
mounted with the mount option \fBsilent\fR.
.sp
The
.B auto
type may be useful for user-mounted floppies.
Creating a file
.I /etc/filesystems
can be useful to change the probe order (e.g., to try vfat before msdos
or ext3 before ext2) or if you use a kernel module autoloader.
.sp
More than one type may be specified in a comma-separated
list, for the
.B \-t
option as well as in an
.I /etc/fstab
entry.  The list of filesystem types for the
.B \-t
option can be prefixed with
.B no
to specify the filesystem types on which no action should be taken.
The prefix
.B no
has no effect when specified in an
.I /etc/fstab
entry.
.sp
The prefix
.B no
can be meaningful with the
.B \-a
option.  For example, the command
.RS
.RS
.sp
.B "mount \-a \-t nomsdos,smbfs"
.sp
.RE
mounts all filesystems except those of type
.I msdos
and
.IR smbfs .
.sp
For most types all the
.B mount
program has to do is issue a simple
.BR mount (2)
system call, and no detailed knowledge of the filesystem type is required.
For a few types however (like nfs, nfs4, cifs, smbfs, ncpfs) an ad hoc code is
necessary.  The nfs, nfs4, cifs, smbfs, and ncpfs filesystems
have a separate mount program.  In order to make it possible to
treat all types in a uniform way, \fBmount\fR will execute the program
.BI /sbin/mount. type
(if that exists) when called with type
.IR type .
Since different versions of the
.B smbmount
program have different calling conventions,
.B /sbin/mount.smbfs
may have to be a shell script that sets up the desired call.
.RE
.TP
.BR \-U , " \-\-uuid " \fIuuid
Mount the partition that has the specified
.IR uuid .
.TP
.BR \-v , " \-\-verbose"
Verbose mode.
.TP
.BR \-w , " \-\-rw" , " \-\-read\-write"
Mount the filesystem read/write.  Read-write is the kernel default and the
.BR mount
default is to try read-only if the previous mount syscall with read-write flags
on write-protected devices of filesystems failed.
.sp
A synonym is
.BR "\-o rw" .

Note that specifying \fB\-w\fR on the command line forces \fBmount\fR to never
try read-only mount on write-protected devices or already mounted read-only
filesystems.
.TP
.BR \-V , " \-\-version"
Display version information and exit.
.TP
.BR \-h , " \-\-help"
Display help text and exit.

.SH FILESYSTEM-INDEPENDENT MOUNT OPTIONS
Some of these options are only useful when they appear in the
.I /etc/fstab
file.

Some of these options could be enabled or disabled by default
in the system kernel.  To check the current setting see the options
in
.IR /proc/mounts .
Note that filesystems also have per-filesystem
specific default mount options (see for example \fBtune2fs \-l\fP
output for extN filesystems).

The following options apply to any filesystem that is being
mounted (but not every filesystem actually honors them \(en e.g.\&, the
.B sync
option today has an effect only for ext2, ext3, ext4, fat, vfat, ufs and xfs):

.TP
.B async
All I/O to the filesystem should be done asynchronously.  (See also the
.B sync
option.)
.TP
.B atime
Do not use the \fBnoatime\fR feature, so the inode access time is controlled
by kernel defaults.  See also the descriptions of the \fB\%relatime\fR and
.B strictatime
mount options.
.TP
.B noatime
Do not update inode access times on this filesystem (e.g.\& for faster
access on the news spool to speed up news servers).  This works for all
inode types (directories too), so it implies \fB\%nodiratime\fR.
.TP
.B auto
Can be mounted with the
.B \-a
option.
.TP
.B noauto
Can only be mounted explicitly (i.e., the
.B \-a
option will not cause the filesystem to be mounted).
.TP
.na
.BR context=\fIcontext ", " fscontext=\fIcontext ", " defcontext=\fIcontext ", and " \%rootcontext=\fIcontext
.ad
The
.B context=
option is useful when mounting filesystems that do not support
extended attributes, such as a floppy or hard disk formatted with VFAT, or
systems that are not normally running under SELinux, such as an ext3 or ext4 formatted
disk from a non-SELinux workstation.  You can also use
.B context=
on filesystems you do not trust, such as a floppy.  It also helps in compatibility with
xattr-supporting filesystems on earlier 2.4.<x> kernel versions.  Even where
xattrs are supported, you can save time not having to label every file by
assigning the entire disk one security context.

A commonly used option for removable media is
.BR \%context="system_u:object_r:removable_t" .

Two other options are
.B fscontext=
and
.BR defcontext= ,
both of which are mutually exclusive of the
.B context=
option.  This means you
can use fscontext and defcontext with each other, but neither can be used with
context.

The
.B fscontext=
option works for all filesystems, regardless of their xattr
support.  The fscontext option sets the overarching filesystem label to a
specific security context.  This filesystem label is separate from the
individual labels on the files.  It represents the entire filesystem for
certain kinds of permission checks, such as during mount or file creation.
Individual file labels are still obtained from the xattrs on the files
themselves.  The context option actually sets the aggregate context that
fscontext provides, in addition to supplying the same label for individual
files.

You can set the default security context for unlabeled files using
.B defcontext=
option.  This overrides the value set for unlabeled files in the policy and requires a
filesystem that supports xattr labeling.

The
.B rootcontext=
option allows you to explicitly label the root inode of a FS being mounted
before that FS or inode becomes visible to userspace.  This was found to be
useful for things like stateless Linux.

Note that the kernel rejects any remount request that includes the context
option, \fBeven\fP when unchanged from the current context.

.BR "Warning: the \fIcontext\fP value might contain commas" ,
in which case the value has to be properly quoted, otherwise
.BR mount (8)
will interpret the comma as a separator between mount options.  Don't forget that
the shell strips off quotes and thus
.BR "double quoting is required" .
For example:
.RS
.RS
.sp
.nf
.B mount \-t tmpfs none /mnt \-o \e
.B \ \ 'context="system_u:object_r:tmp_t:s0:c127,c456",noexec'
.fi
.sp
.RE
For more details, see
.BR selinux (8).
.RE

.TP
.B defaults
Use the default options:
.BR rw ", " suid ", " dev ", " exec ", " auto ", " nouser ", and " async .

Note that the real set of all default mount options depends on the kernel
and filesystem type.  See the beginning of this section for more details.
.TP
.B dev
Interpret character or block special devices on the filesystem.
.TP
.B nodev
Do not interpret character or block special devices on the filesystem.
.TP
.B diratime
Update directory inode access times on this filesystem.  This is the default.
(This option is ignored when \fBnoatime\fR is set.)
.TP
.B nodiratime
Do not update directory inode access times on this filesystem.
(This option is implied when \fBnoatime\fR is set.)
.TP
.B dirsync
All directory updates within the filesystem should be done synchronously.
This affects the following system calls: creat, link, unlink, symlink,
mkdir, rmdir, mknod and rename.
.TP
.B exec
Permit execution of binaries.
.TP
.B noexec
Do not permit direct execution of any binaries on the mounted filesystem.
.TP
.B group
Allow an ordinary user to mount the filesystem if one
of that user's groups matches the group of the device.
This option implies the options
.BR nosuid " and " nodev
(unless overridden by subsequent options, as in the option line
.BR group,dev,suid ).
.TP
.B iversion
Every time the inode is modified, the i_version field will be incremented.
.TP
.B noiversion
Do not increment the i_version inode field.
.TP
.B mand
Allow mandatory locks on this filesystem.  See
.BR fcntl (2).
.TP
.B nomand
Do not allow mandatory locks on this filesystem.
.TP
.B _netdev
The filesystem resides on a device that requires network access
(used to prevent the system from attempting to mount these filesystems
until the network has been enabled on the system).
.TP
.B nofail
Do not report errors for this device if it does not exist.
.TP
.B relatime
Update inode access times relative to modify or change time.  Access
time is only updated if the previous access time was earlier than the
current modify or change time.  (Similar to \fB\%noatime\fR, but it doesn't
break \fBmutt\fR or other applications that need to know if a file has been
read since the last time it was modified.)

Since Linux 2.6.30, the kernel defaults to the behavior provided by this
option (unless
.B \%noatime
was specified), and the
.B \%strictatime
option is required to obtain traditional semantics.  In addition, since Linux
2.6.30, the file's last access time is always updated if it is more than 1
day old.
.TP
.B norelatime
Do not use the
.B relatime
feature.  See also the
.B strictatime
mount option.
.TP
.B strictatime
Allows to explicitly request full atime updates.  This makes it
possible for the kernel to default to
.B \%relatime
or
.B \%noatime
but still allow userspace to override it.  For more details about the default
system mount options see
.IR /proc/mounts .
.TP
.B nostrictatime
Use the kernel's default behavior for inode access time updates.
.TP
.B lazytime
Only update times (atime, mtime, ctime) on the in-memory version of the file inode.

This mount option significantly reduces writes to the inode table for
workloads that perform frequent random writes to preallocated files.

The on-disk timestamps are updated only when:
.RS
.IP - 2
the inode needs to be updated for some change unrelated to file timestamps
.IP -
the application employs
.BR fsync (2),
.BR syncfs (2),
or
.BR sync (2)
.IP -
an undeleted inode is evicted from memory
.IP -
more than 24 hours have passed since the i-node was written to disk.
.RE
.sp
.TP
.B nolazytime
Do not use the lazytime feature.
.TP
.B suid
Honor set-user-ID and set-group-ID bits or file capabilities when
executing programs from this filesystem.
.TP
.B nosuid
Do not honor set-user-ID and set-group-ID bits or file capabilities when
executing programs from this filesystem.
.TP
.B silent
Turn on the silent flag.
.TP
.B loud
Turn off the silent flag.
.TP
.B owner
Allow an ordinary user to mount the filesystem if that
user is the owner of the device.
This option implies the options
.BR nosuid " and " nodev
(unless overridden by subsequent options, as in the option line
.BR owner,dev,suid ).
.TP
.B remount
Attempt to remount an already-mounted filesystem.  This is commonly
used to change the mount flags for a filesystem, especially to make a
readonly filesystem writable.  It does not change device or mount point.

The remount operation together with the
.B bind
flag has special semantics. See above, the subsection \fBBind mounts\fR.

The remount functionality follows the standard way the
.B mount
command works
with options from
.IR fstab .
This means that \fBmount\fR does not read
.I fstab
(or
.IR mtab )
only when both
.I device
and
.I dir
are specified.
.sp
.in +4
.B "mount \-o remount,rw /dev/foo /dir"
.in
.sp
After this call all old mount options are replaced and arbitrary stuff from
.I fstab
(or
.IR mtab )
is ignored, except the loop= option which is internally
generated and maintained by the mount command.
.sp
.in +4
.B "mount \-o remount,rw  /dir"
.in
.sp
After this call, mount reads
.I fstab
and merges these options with
the options from the command line (\fB\-o\fR).
If no mountpoint is found in
.IR fstab ,
then a remount with unspecified source is
allowed.
.sp
.B mount
allows the use of \fB\-\-all\fR to remount all already mounted filesystems
which match a specified filter (\fB\-O\fR and \fB\-t\fR).  For example:
.sp
.in +4
.B "mount \-\-all \-o remount,ro \-t vfat"
.in
.sp
remounts all already mounted vfat filesystems in read-only mode. Each of the
filesystems is remounted by "mount \-o remount,ro /dir" semantic.
This means the
.B mount
command reads
.I fstab
or
.I mtab
and merges these options with the options
from the command line.
.TP
.B ro
Mount the filesystem read-only.
.TP
.B rw
Mount the filesystem read-write.
.TP
.B sync
All I/O to the filesystem should be done synchronously.  In the case of
media with a limited number of write cycles
(e.g.\& some flash drives), \fBsync\fR may cause life-cycle shortening.
.TP
.B user
Allow an ordinary user to mount the filesystem.
The name of the mounting user is written to the
.I mtab
file (or to the private
libmount file in
.I /run/mount
on systems without a regular
.IR mtab )
so that this
same user can unmount the filesystem again.
This option implies the options
.BR noexec ", " nosuid ", and " nodev
(unless overridden by subsequent options, as in the option line
.BR user,exec,dev,suid ).
.TP
.B nouser
Forbid an ordinary user to mount the filesystem.
This is the default; it does not imply any other options.
.TP
.B users
Allow any user to mount and to unmount the filesystem, even
when some other ordinary user mounted it.
This option implies the options
.BR noexec ", " nosuid ", and " nodev
(unless overridden by subsequent options, as in the option line
.BR users,exec,dev,suid ).
.TP
.B X-*
All options prefixed with "X-" are interpreted as comments or as userspace
application-specific options.
These options are not stored in user space (e.g.,
.I mtab
file),
nor sent to the mount.\fItype\fR helpers nor to the
.BR mount (2)
system call.  The suggested format is \fBX-\fIappname\fR.\fIoption\fR.
.TP
.B x-*
The same as \fBX-*\fR options, but stored permanently in user space.
This means the options are also available for
.B umount
or other operations.  Note
that maintaining  mount options in user space is tricky,
because it's necessary use
libmount-based tools and there is no guarantee that the options will be always
available (for example after a move mount operation or in unshared namespace).

Note that before util-linux v2.30 the x-* options have not been maintained by
libmount and stored in user space (functionality was the same as for X-* now),
but due to the growing number of use-cases (in initrd, systemd etc.) the
functionality has been extended to keep existing
.I fstab
configurations usable
without a change.
.TP
.BR X-mount.mkdir [ = \fImode\fR ]
Allow to make a target directory (mountpoint) if it does not exit yet.
The optional argument
.I mode
specifies the filesystem access mode used for
.BR mkdir (2)
in octal notation.  The default mode is 0755.  This functionality is supported
only for root users or when mount executed without suid permissions.  The option
is also supported as x-mount.mkdir, this notation is deprecated since v2.30.

.SH FILESYSTEM-SPECIFIC MOUNT OPTIONS
This section lists options that are specific to particular filesystems.
Where possible, you should first consult filesystem-specific manual pages
for details.
Some of those pages are listed in the following table.
.TS
lb lb
l l.
Filesystem(s)   Manual page
btrfs   \fBbtrfs\fP(5)
cifs    \fBmount.cifs\fP(8)
ext2, ext3, ext4        \fBext4\fP(5)
fuse    \fBfuse\fP(8)
nfs     \fBnfs\fP(5)
tmpfs   \fBtmpfs\fP(5)
xfs     \fBxfs\fP(5)
.TE
.PP
Note that some of the pages listed above might be available only
after you install the respective userland tools.
.PP
The following options apply only to certain filesystems.
We sort them by filesystem.
All options follow the
.B \-o
flag.
.PP
What options are supported depends a bit on the running kernel.
Further information may be available in fileystem-specific
files in the kernel source subdirectory
.IR Documentation/filesystems .
.\"
.SS "Mount options for adfs"
.TP
\fBuid=\fP\,\fIvalue\fP and \fBgid=\fP\,\fIvalue\fP
Set the owner and group of the files in the filesystem (default: uid=gid=0).
.TP
\fBownmask=\fP\,\fIvalue\fP and \fBothmask=\fP\,\fIvalue\fP
Set the permission mask for ADFS 'owner' permissions and 'other' permissions,
respectively (default: 0700 and 0077, respectively).
See also
.IR /usr/src/linux/Documentation/filesystems/adfs.rst .

.SS "Mount options for affs"
.TP
\fBuid=\fP\,\fIvalue\fP and \fBgid=\fP\,\fIvalue\fP
Set the owner and group of the root of the filesystem (default: uid=gid=0,
but with option
.B uid
or
.B gid
without specified value, the UID and GID of the current process are taken).
.TP
\fBsetuid=\fP\,\fIvalue\fP and \fBsetgid=\fP\,\fIvalue\fP
Set the owner and group of all files.
.TP
.BI mode= value
Set the mode of all files to
.IR value " & 0777"
disregarding the original permissions.
Add search permission to directories that have read permission.
The value is given in octal.
.TP
.B protect
Do not allow any changes to the protection bits on the filesystem.
.TP
.B usemp
Set UID and GID of the root of the filesystem to the UID and GID
of the mount point upon the first sync or umount, and then
clear this option.  Strange...
.TP
.B verbose
Print an informational message for each successful mount.
.TP
.BI prefix= string
Prefix used before volume name, when following a link.
.TP
.BI volume= string
Prefix (of length at most 30) used before '/' when following a symbolic link.
.TP
.BI reserved= value
(Default: 2.) Number of unused blocks at the start of the device.
.TP
.BI root= value
Give explicitly the location of the root block.
.TP
.BI bs= value
Give blocksize.  Allowed values are 512, 1024, 2048, 4096.
.TP
.BR grpquota | noquota | quota | usrquota
These options are accepted but ignored.
(However, quota utilities may react to such strings in
.IR /etc/fstab .)

.SS "Mount options for debugfs"
The debugfs filesystem is a pseudo filesystem, traditionally mounted on
.IR /sys/kernel/debug .
.\" or just /debug
.\" present since 2.6.11
As of kernel version 3.4, debugfs has the following options:
.TP
.BI uid= n ", gid=" n
Set the owner and group of the mountpoint.
.TP
.BI mode= value
Sets the mode of the mountpoint.

.SS "Mount options for devpts"
The devpts filesystem is a pseudo filesystem, traditionally mounted on
.IR /dev/pts .
In order to acquire a pseudo terminal, a process opens
.IR /dev/ptmx ;
the number of the pseudo terminal is then made available to the process
and the pseudo terminal slave can be accessed as
.IR /dev/pts/ <number>.
.TP
\fBuid=\fP\,\fIvalue\fP and \fBgid=\fP\,\fIvalue\fP
This sets the owner or the group of newly created pseudo terminals to
the specified values.  When nothing is specified, they will
be set to the UID and GID of the creating process.
For example, if there is a tty group with GID 5, then
.B gid=5
will cause newly created pseudo terminals to belong to the tty group.
.TP
.BI mode= value
Set the mode of newly created pseudo terminals to the specified value.
The default is 0600.
A value of
.B mode=620
and
.B gid=5
makes "mesg y" the default on newly created pseudo terminals.
.TP
\fBnewinstance
Create a private instance of the devpts filesystem, such that
indices of pseudo terminals allocated in this new instance are
independent of indices created in other instances of devpts.

All mounts of devpts without this
.B newinstance
option share the same set of pseudo terminal indices (i.e., legacy mode).
Each mount of devpts with the
.B newinstance
option has a private set of pseudo terminal indices.

This option is mainly used to support containers in the
Linux kernel.  It is implemented in Linux kernel versions
starting with 2.6.29.  Further, this mount option is valid
only if CONFIG_DEVPTS_MULTIPLE_INSTANCES is enabled in the
kernel configuration.

To use this option effectively,
.I /dev/ptmx
must be a symbolic link to
.IR pts/ptmx .
See
.I Documentation/filesystems/devpts.txt
in the Linux kernel source tree for details.
.TP
.BI ptmxmode= value

Set the mode for the new
.I ptmx
device node in the devpts filesystem.

With the support for multiple instances of devpts (see
.B newinstance
option above), each instance has a private
.I ptmx
node in the root of the devpts filesystem (typically
.IR /dev/pts/ptmx ).

For compatibility with older versions of the kernel, the
default mode of the new
.I ptmx
node is 0000.
.BI ptmxmode= value
specifies a more useful mode for the
.I ptmx
node and is highly recommended when the
.B newinstance
option is specified.

This option is only implemented in Linux kernel versions
starting with 2.6.29.  Further, this option is valid only if
CONFIG_DEVPTS_MULTIPLE_INSTANCES is enabled in the kernel
configuration.

.SS "Mount options for fat"
(Note:
.I fat
is not a separate filesystem, but a common part of the
.IR msdos ,
.I umsdos
and
.I vfat
filesystems.)
.TP
.BR blocksize= { 512 | 1024 | 2048 }
Set blocksize (default 512).  This option is obsolete.
.TP
\fBuid=\fP\,\fIvalue\fP and \fBgid=\fP\,\fIvalue\fP
Set the owner and group of all files.
(Default: the UID and GID of the current process.)
.TP
.BI umask= value
Set the umask (the bitmask of the permissions that are
.B not
present).  The default is the umask of the current process.
The value is given in octal.
.TP
.BI dmask= value
Set the umask applied to directories only.
The default is the umask of the current process.
The value is given in octal.
.TP
.BI fmask= value
Set the umask applied to regular files only.
The default is the umask of the current process.
The value is given in octal.
.TP
.BI allow_utime= value
This option controls the permission check of mtime/atime.
.RS
.TP
.B 20
If current process is in group of file's group ID, you can change timestamp.
.TP
.B 2
Other users can change timestamp.
.PP
The default is set from `dmask' option. (If the directory is writable,
.BR utime (2)
is also allowed.  I.e.\& \s+3~\s0dmask & 022)

Normally
.BR utime (2)
checks that the current process is owner of the file, or that it has the
.B CAP_FOWNER
capability.  But FAT filesystems don't have UID/GID on disk, so the
normal check is too inflexible.  With this option you can relax it.
.RE
.TP
.BI check= value
Three different levels of pickiness can be chosen:
.RS
.TP
.BR r [ elaxed ]
Upper and lower case are accepted and equivalent, long name parts are
truncated (e.g.\&
.I verylongname.foobar
becomes
.IR verylong.foo ),
leading and embedded spaces are accepted in each name part (name and extension).
.TP
.BR n [ ormal ]
Like "relaxed", but many special characters (*, ?, <, spaces, etc.) are
rejected.  This is the default.
.TP
.BR s [ trict ]
Like "normal", but names that contain long parts or special characters
that are sometimes used on Linux but are not accepted by MS-DOS
(+, =, etc.) are rejected.
.RE
.TP
.BI codepage= value
Sets the codepage for converting to shortname characters on FAT
and VFAT filesystems.  By default, codepage 437 is used.
.TP
.BI conv= mode
This option is obsolete and may fail or be ignored.
.TP
.BI cvf_format= module
Forces the driver to use the CVF (Compressed Volume File) module
.RI cvf_ module
instead of auto-detection.  If the kernel supports kmod, the
cvf_format=xxx option also controls on-demand CVF module loading.
This option is obsolete.
.TP
.BI cvf_option= option
Option passed to the CVF module.  This option is obsolete.
.TP
.B debug
Turn on the
.I debug
flag.  A version string and a list of filesystem parameters will be
printed (these data are also printed if the parameters appear to be
inconsistent).
.TP
.B discard
If set, causes discard/TRIM commands to be issued to the block device
when blocks are freed.  This is useful for SSD devices and
sparse/thinly-provisioned LUNs.
.TP
.B dos1xfloppy
If set, use a fallback default BIOS Parameter Block configuration, determined
by backing device size.  These static parameters match defaults assumed by DOS
1.x for 160 kiB, 180 kiB, 320 kiB, and 360 kiB floppies and floppy images.
.TP
.BR errors= { panic | continue | remount-ro }
Specify FAT behavior on critical errors: panic, continue without doing
anything, or remount the partition in read-only mode (default behavior).
.TP
.BR fat= { 12 | 16 | 32 }
Specify a 12, 16 or 32 bit fat.  This overrides
the automatic FAT type detection routine.  Use with caution!
.TP
.BI iocharset= value
Character set to use for converting between 8 bit characters
and 16 bit Unicode characters.  The default is iso8859-1.
Long filenames are stored on disk in Unicode format.
.TP
.BR nfs= { stale_rw | nostale_ro }
Enable this only if you want to export the FAT filesystem over NFS.

.BR stale_rw :
This option maintains an index (cache) of directory inodes which is used by the
nfs-related code to improve look-ups.  Full file operations (read/write) over
NFS are supported but with cache eviction at NFS server, this could result in
spurious
.B ESTALE
errors.

.BR nostale_ro :
This option bases the inode number and file handle
on the on-disk location of a file in the FAT directory entry.
This ensures that
.B ESTALE
will not be returned after a file is
evicted from the inode cache.  However, it means that operations
such as rename, create and unlink could cause file handles that
previously pointed at one file to point at a different file,
potentially causing data corruption.  For this reason, this
option also mounts the filesystem readonly.

To maintain backward compatibility, '\-o nfs' is also accepted,
defaulting to
.BR stale_rw .
.TP
.B tz=UTC
This option disables the conversion of timestamps
between local time (as used by Windows on FAT) and UTC
(which Linux uses internally).  This is particularly
useful when mounting devices (like digital cameras)
that are set to UTC in order to avoid the pitfalls of
local time.
.TP
.BI time_offset= minutes
Set offset for conversion of timestamps from local time used by FAT to UTC.
I.e.,
.I minutes
will be subtracted from each timestamp to convert it to UTC used
internally by Linux.  This is useful when the time zone set in the kernel via
.BR settimeofday (2)
is not the time zone used by the filesystem.  Note
that this option still does not provide correct time stamps in all cases in
presence of DST - time stamps in a different DST setting will be off by one
hour.
.TP
.B quiet
Turn on the
.I quiet
flag.  Attempts to chown or chmod files do not return errors,
although they fail.  Use with caution!
.TP
.B rodir
FAT has the ATTR_RO (read-only) attribute.  On Windows, the ATTR_RO of the
directory will just be ignored, and is used only by applications as a flag
(e.g.\& it's set for the customized folder).

If you want to use ATTR_RO as read-only flag even for the directory, set this
option.
.TP
.B showexec
If set, the execute permission bits of the file will be allowed only if
the extension part of the name is \&.EXE, \&.COM, or \&.BAT.  Not set by default.
.TP
.B sys_immutable
If set, ATTR_SYS attribute on FAT is handled as IMMUTABLE flag on Linux.
Not set by default.
.TP
.B flush
If set, the filesystem will try to flush to disk more early than normal.
Not set by default.
.TP
.B usefree
Use the "free clusters" value stored on FSINFO.  It'll
be used to determine number of free clusters without
scanning disk.  But it's not used by default, because
recent Windows don't update it correctly in some
case.  If you are sure the "free clusters" on FSINFO is
correct, by this option you can avoid scanning disk.
.TP
.BR dots ", " nodots ", " dotsOK= [ yes | no ]
Various misguided attempts to force Unix or DOS conventions
onto a FAT filesystem.

.SS "Mount options for hfs"
.TP
.BI creator= cccc ", type=" cccc
Set the creator/type values as shown by the MacOS finder
used for creating new files.  Default values: '????'.
.TP
.BI uid= n ", gid=" n
Set the owner and group of all files.
(Default: the UID and GID of the current process.)
.TP
.BI dir_umask= n ", file_umask=" n ", umask=" n
Set the umask used for all directories, all regular files, or all
files and directories.  Defaults to the umask of the current process.
.TP
.BI session= n
Select the CDROM session to mount.
Defaults to leaving that decision to the CDROM driver.
This option will fail with anything but a CDROM as underlying device.
.TP
.BI part= n
Select partition number n from the device.
Only makes sense for CDROMs.
Defaults to not parsing the partition table at all.
.TP
.B quiet
Don't complain about invalid mount options.

.SS "Mount options for hpfs"
.TP
\fBuid=\fP\,\fIvalue\fP and \fBgid=\fP\,\fIvalue\fP
Set the owner and group of all files. (Default: the UID and GID
of the current process.)
.TP
.BI umask= value
Set the umask (the bitmask of the permissions that are
.B not
present).  The default is the umask of the current process.
The value is given in octal.
.TP
.BR case= { lower | asis }
Convert all files names to lower case, or leave them.
(Default:
.BR case=lower .)
.TP
.BI conv= mode
This option is obsolete and may fail or being ignored.
.TP
.B nocheck
Do not abort mounting when certain consistency checks fail.

.SS "Mount options for iso9660"
ISO 9660 is a standard describing a filesystem structure to be used
on CD-ROMs. (This filesystem type is also seen on some DVDs.  See also the
.I udf
filesystem.)

Normal
.I iso9660
filenames appear in an 8.3 format (i.e., DOS-like restrictions on filename
length), and in addition all characters are in upper case.  Also there is
no field for file ownership, protection, number of links, provision for
block/character devices, etc.

Rock Ridge is an extension to iso9660 that provides all of these UNIX-like
features.  Basically there are extensions to each directory record that
supply all of the additional information, and when Rock Ridge is in use,
the filesystem is indistinguishable from a normal UNIX filesystem (except
that it is read-only, of course).
.TP
.B norock
Disable the use of Rock Ridge extensions, even if available.  Cf.\&
.BR map .
.TP
.B nojoliet
Disable the use of Microsoft Joliet extensions, even if available.  Cf.\&
.BR map .
.TP
.BR check= { r [ elaxed ]| s [ trict ]}
With
.BR check=relaxed ,
a filename is first converted to lower case before doing the lookup.
This is probably only meaningful together with
.B norock
and
.BR map=normal .
(Default:
.BR check=strict .)
.TP
\fBuid=\fP\,\fIvalue\fP and \fBgid=\fP\,\fIvalue\fP
Give all files in the filesystem the indicated user or group id,
possibly overriding the information found in the Rock Ridge extensions.
(Default:
.BR uid=0,gid=0 .)
.TP
.BR map= { n [ ormal ]| o [ ff ]| a [ corn ]}
For non-Rock Ridge volumes, normal name translation maps upper
to lower case ASCII, drops a trailing `;1', and converts `;' to `.'.
With
.B map=off
no name translation is done.  See
.BR norock .
(Default:
.BR map=normal .)
.B map=acorn
is like
.B map=normal
but also apply Acorn extensions if present.
.TP
.BI mode= value
For non-Rock Ridge volumes, give all files the indicated mode.
(Default: read and execute permission for everybody.)
Octal mode values require a leading 0.
.TP
.B unhide
Also show hidden and associated files.
(If the ordinary files and the associated or hidden files have
the same filenames, this may make the ordinary files inaccessible.)
.TP
.BR block= { 512 | 1024 | 2048 }
Set the block size to the indicated value.
(Default:
.BR block=1024 .)
.TP
.BI conv= mode
This option is obsolete and may fail or being ignored.
.TP
.B cruft
If the high byte of the file length contains other garbage,
set this mount option to ignore the high order bits of the file length.
This implies that a file cannot be larger than 16\ MB.
.TP
.BI session= x
Select number of session on multisession CD.
.TP
.BI sbsector= xxx
Session begins from sector xxx.
.LP
The following options are the same as for vfat and specifying them only makes
sense when using discs encoded using Microsoft's Joliet extensions.
.TP
.BI iocharset= value
Character set to use for converting 16 bit Unicode characters on CD
to 8 bit characters.  The default is iso8859-1.
.TP
.B utf8
Convert 16 bit Unicode characters on CD to UTF-8.

.SS "Mount options for jfs"
.TP
.BI iocharset= name
Character set to use for converting from Unicode to ASCII.  The default is
to do no conversion.  Use
.B iocharset=utf8
for UTF8 translations.  This requires CONFIG_NLS_UTF8 to be set in
the kernel
.I ".config"
file.
.TP
.BI resize= value
Resize the volume to
.I value
blocks.  JFS only supports growing a volume, not shrinking it.  This option
is only valid during a remount, when the volume is mounted read-write.  The
.B resize
keyword with no value will grow the volume to the full size of the partition.
.TP
.B nointegrity
Do not write to the journal.  The primary use of this option is to allow
for higher performance when restoring a volume from backup media.  The
integrity of the volume is not guaranteed if the system abnormally ends.
.TP
.B integrity
Default.  Commit metadata changes to the journal.  Use this option to remount
a volume where the
.B nointegrity
option was previously specified in order to restore normal behavior.
.TP
.BR errors= { continue | remount-ro | panic }
Define the behavior when an error is encountered.
(Either ignore errors and just mark the filesystem erroneous and continue,
or remount the filesystem read-only, or panic and halt the system.)
.TP
.BR noquota | quota | usrquota | grpquota
These options are accepted but ignored.

.SS "Mount options for msdos"
See mount options for fat.
If the
.I msdos
filesystem detects an inconsistency, it reports an error and sets the file
system read-only.  The filesystem can be made writable again by remounting
it.

.SS "Mount options for ncpfs"
Just like
.IR nfs ", the " ncpfs
implementation expects a binary argument (a
.IR "struct ncp_mount_data" )
to the mount system call.  This argument is constructed by
.BR ncpmount (8)
and the current version of
.B mount
(2.12) does not know anything about ncpfs.

.SS "Mount options for ntfs"
.TP
.BI iocharset= name
Character set to use when returning file names.
Unlike VFAT, NTFS suppresses names that contain
nonconvertible characters.  Deprecated.
.TP
.BI nls= name
New name for the option earlier called
.IR iocharset .
.TP
.B utf8
Use UTF-8 for converting file names.
.TP
.BR uni_xlate= { 0 | 1 | 2 }
For 0 (or `no' or `false'), do not use escape sequences
for unknown Unicode characters.
For 1 (or `yes' or `true') or 2, use vfat-style 4-byte escape sequences
starting with ":".  Here 2 give a little-endian encoding
and 1 a byteswapped bigendian encoding.
.TP
.B posix=[0|1]
If enabled (posix=1), the filesystem distinguishes between
upper and lower case.  The 8.3 alias names are presented as
hard links instead of being suppressed.  This option is obsolete.
.TP
\fBuid=\fP\,\fIvalue\fP, \fBgid=\fP\,\fIvalue\fP and \fBumask=\fP\,\fIvalue\fP
Set the file permission on the filesystem.
The umask value is given in octal.
By default, the files are owned by root and not readable by somebody else.

.SS "Mount options for overlay"
Since Linux 3.18 the overlay pseudo filesystem implements a union mount for
other filesystems.

An overlay filesystem combines two filesystems - an \fBupper\fR filesystem and
a \fBlower\fR filesystem.  When a name exists in both filesystems, the object
in the upper filesystem is visible while the object in the lower filesystem is
either hidden or, in the case of directories, merged with the upper object.

The lower filesystem can be any filesystem supported by Linux and does not need
to be writable.  The lower filesystem can even be another overlayfs.  The upper
filesystem will normally be writable and if it is it must support the creation
of trusted.* extended attributes, and must provide a valid d_type in readdir
responses, so NFS is not suitable.

A read-only overlay of two read-only filesystems may use any filesystem type.
The options \fBlowerdir\fR and \fBupperdir\fR are combined into a merged
directory by using:

.RS
.br
.nf
.B "mount \-t overlay  overlay  \e"
.B "  \-olowerdir=/lower,upperdir=/upper,workdir=/work  /merged"
.fi
.br
.RE

.TP
.BI lowerdir= directory
Any filesystem, does not need to be on a writable filesystem.
.TP
.BI upperdir= directory
The upperdir is normally on a writable filesystem.
.TP
.BI workdir= directory
The workdir needs to be an empty directory on the same filesystem as upperdir.

.SS "Mount options for reiserfs"
Reiserfs is a journaling filesystem.
.TP
.B conv
Instructs version 3.6 reiserfs software to mount a version 3.5 filesystem,
using the 3.6 format for newly created objects.  This filesystem will no
longer be compatible with reiserfs 3.5 tools.
.TP
.BR hash= { rupasov | tea | r5 | detect }
Choose which hash function reiserfs will use to find files within directories.
.RS
.TP
.B rupasov
A hash invented by Yury Yu.\& Rupasov.  It is fast and preserves locality,
mapping lexicographically close file names to close hash values.
This option should not be used, as it causes a high probability of hash
collisions.
.TP
.B tea
A Davis-Meyer function implemented by Jeremy Fitzhardinge.
It uses hash permuting bits in the name.  It gets high randomness
and, therefore, low probability of hash collisions at some CPU cost.
This may be used if EHASHCOLLISION errors are experienced with the r5 hash.
.TP
.B r5
A modified version of the rupasov hash.  It is used by default and is
the best choice unless the filesystem has huge directories and
unusual file-name patterns.
.TP
.B detect
Instructs
.I mount
to detect which hash function is in use by examining
the filesystem being mounted, and to write this information into
the reiserfs superblock.  This is only useful on the first mount of
an old format filesystem.
.RE
.TP
.B hashed_relocation
Tunes the block allocator.  This may provide performance improvements
in some situations.
.TP
.B no_unhashed_relocation
Tunes the block allocator.  This may provide performance improvements
in some situations.
.TP
.B noborder
Disable the border allocator algorithm invented by Yury Yu.\& Rupasov.
This may provide performance improvements in some situations.
.TP
.B nolog
Disable journaling.  This will provide slight performance improvements in
some situations at the cost of losing reiserfs's fast recovery from crashes.
Even with this option turned on, reiserfs still performs all journaling
operations, save for actual writes into its journaling area.  Implementation
of
.I nolog
is a work in progress.
.TP
.B notail
By default, reiserfs stores small files and `file tails' directly into its
tree.  This confuses some utilities such as
.BR LILO (8).
This option is used to disable packing of files into the tree.
.TP
.B replayonly
Replay the transactions which are in the journal, but do not actually
mount the filesystem.  Mainly used by
.IR reiserfsck .
.TP
.BI resize= number
A remount option which permits online expansion of reiserfs partitions.
Instructs reiserfs to assume that the device has
.I number
blocks.
This option is designed for use with devices which are under logical
volume management (LVM).
There is a special
.I resizer
utility which can be obtained from
.IR ftp://ftp.namesys.com/pub/reiserfsprogs .
.TP
.B user_xattr
Enable Extended User Attributes.  See the
.BR attr (1)
manual page.
.TP
.B acl
Enable POSIX Access Control Lists.  See the
.BR acl (5)
manual page.
.TP
.BR barrier=none " / " barrier=flush "
This disables / enables the use of write barriers in the journaling code.
barrier=none disables, barrier=flush enables (default).  This also requires an
IO stack which can support barriers, and if reiserfs gets an error on a barrier
write, it will disable barriers again with a warning.  Write barriers enforce
proper on-disk ordering of journal commits, making volatile disk write caches
safe to use, at some performance penalty.  If your disks are battery-backed in
one way or another, disabling barriers may safely improve performance.

.SS "Mount options for ubifs"
UBIFS is a flash filesystem which works on top of UBI volumes.  Note that
\fBatime\fR is not supported and is always turned off.
.TP
The device name may be specified as
.PP
.RS
.B ubiX_Y
UBI device number
.BR X ,
volume number
.B Y
.TP
.B ubiY
UBI device number
.BR 0 ,
volume number
.B Y
.TP
.B ubiX:NAME
UBI device number
.BR X ,
volume with name
.B NAME
.TP
.B ubi:NAME
UBI device number
.BR 0 ,
volume with name
.B NAME
.RE
.PP
Alternative
.B !
separator may be used instead of
.BR : .
.TP
The following mount options are available:
.TP
.B bulk_read
Enable bulk-read.  VFS read-ahead is disabled because it slows down the filesystem.  Bulk-Read is an internal optimization.  Some flashes may read faster if
the data are read at one go, rather than at several read requests.  For
example, OneNAND can do "read-while-load" if it reads more than one NAND page.
.TP
.B no_bulk_read
Do not bulk-read.  This is the default.
.TP
.B chk_data_crc
Check data CRC-32 checksums.  This is the default.
.TP
.BR no_chk_data_crc .
Do not check data CRC-32 checksums.  With this option, the filesystem does not
check CRC-32 checksum for data, but it does check it for the internal indexing
information.  This option only affects reading, not writing.  CRC-32 is always
calculated when writing the data.
.TP
.BR compr= { none | lzo | zlib }
Select the default compressor which is used when new files are written.  It is
still possible to read compressed files if mounted with the
.B none
option.

.SS "Mount options for udf"
UDF is the "Universal Disk Format" filesystem defined by OSTA, the Optical
Storage Technology Association, and is often used for DVD-ROM, frequently
in the form of a hybrid UDF/ISO-9660 filesystem. It is, however,
perfectly usable by itself on disk drives, flash drives and other block devices.
See also
.IR iso9660 .
.TP
.B uid=
Make all files in the filesystem belong to the given user.
uid=forget can be specified independently of (or usually in
addition to) uid=<user> and results in UDF
not storing uids to the media. In fact the recorded uid
is the 32-bit overflow uid \-1 as defined by the UDF standard.
The value is given as either <user> which is a valid user name or the corresponding
decimal user id, or the special string "forget".
.TP
.B gid=
Make all files in the filesystem belong to the given group.
gid=forget can be specified independently of (or usually in
addition to) gid=<group> and results in UDF
not storing gids to the media. In fact the recorded gid
is the 32-bit overflow gid \-1 as defined by the UDF standard.
The value is given as either <group> which is a valid group name or the corresponding
decimal group id, or the special string "forget".
.TP
.B umask=
Mask out the given permissions from all inodes read from the filesystem.
The value is given in octal.
.TP
.B mode=
If mode= is set the permissions of all non-directory inodes read from the
filesystem will be set to the given mode. The value is given in octal.
.TP
.B dmode=
If dmode= is set the permissions of all directory inodes read from the
filesystem will be set to the given dmode. The value is given in octal.
.TP
.B bs=
Set the block size. Default value prior to kernel version 2.6.30 was
2048. Since 2.6.30 and prior to 4.11 it was logical device block size with
fallback to 2048. Since 4.11 it is logical block size with fallback to
any valid block size between logical device block size and 4096.

For other details see the \fBmkudffs\fP(8) 2.0+ manpage, sections
\fBCOMPATIBILITY\fP and \fBBLOCK SIZE\fP.
.TP
.B unhide
Show otherwise hidden files.
.TP
.B undelete
Show deleted files in lists.
.TP
.B adinicb
Embed data in the inode. (default)
.TP
.B noadinicb
Don't embed data in the inode.
.TP
.B shortad
Use short UDF address descriptors.
.TP
.B longad
Use long UDF address descriptors. (default)
.TP
.B nostrict
Unset strict conformance.
.TP
.B iocharset=
Set the NLS character set. This requires kernel compiled with CONFIG_UDF_NLS option.
.TP
.B utf8
Set the UTF-8 character set.
.SS Mount options for debugging and disaster recovery
.TP
.B novrs
Ignore the Volume Recognition Sequence and attempt to mount anyway.
.TP
.B session=
Select the session number for multi-session recorded optical media. (default= last session)
.TP
.B anchor=
Override standard anchor location. (default= 256)
.TP
.B lastblock=
Set the last block of the filesystem.
.SS Unused historical mount options that may be encountered and should be removed
.TP
.B uid=ignore
Ignored, use uid=<user> instead.
.TP
.B gid=ignore
Ignored, use gid=<group> instead.
.TP
.B volume=
Unimplemented and ignored.
.TP
.B partition=
Unimplemented and ignored.
.TP
.B fileset=
Unimplemented and ignored.
.TP
.B rootdir=
Unimplemented and ignored.

.SS "Mount options for ufs"
.TP
.BI ufstype= value
UFS is a filesystem widely used in different operating systems.
The problem are differences among implementations.  Features of some
implementations are undocumented, so its hard to recognize the
type of ufs automatically.
That's why the user must specify the type of ufs by mount option.
Possible values are:
.RS
.TP
.B old
Old format of ufs, this is the default, read only.
(Don't forget to give the \-r option.)
.TP
.B 44bsd
For filesystems created by a BSD-like system (NetBSD, FreeBSD, OpenBSD).
.TP
.B ufs2
Used in FreeBSD 5.x supported as read-write.
.TP
.B 5xbsd
Synonym for ufs2.
.TP
.B sun
For filesystems created by SunOS or Solaris on Sparc.
.TP
.B sunx86
For filesystems created by Solaris on x86.
.TP
.B hp
For filesystems created by HP-UX, read-only.
.TP
.B nextstep
For filesystems created by NeXTStep (on NeXT station) (currently read only).
.TP
.B nextstep-cd
For NextStep CDROMs (block_size == 2048), read-only.
.TP
.B openstep
For filesystems created by OpenStep (currently read only).
The same filesystem type is also used by Mac OS X.
.RE

.TP
.BI onerror= value
Set behavior on error:
.RS
.TP
.B panic
If an error is encountered, cause a kernel panic.
.TP
.RB [ lock | umount | repair ]
These mount options don't do anything at present;
when an error is encountered only a console message is printed.
.RE

.SS "Mount options for umsdos"
See mount options for msdos.
The
.B dotsOK
option is explicitly killed by
.IR umsdos .

.SS "Mount options for vfat"
First of all, the mount options for
.I fat
are recognized.
The
.B dotsOK
option is explicitly killed by
.IR vfat .
Furthermore, there are
.TP
.B uni_xlate
Translate unhandled Unicode characters to special escaped sequences.
This lets you backup and restore filenames that are created with any
Unicode characters.  Without this option, a '?' is used when no
translation is possible.  The escape character is ':' because it is
otherwise invalid on the vfat filesystem.  The escape sequence
that gets used, where u is the Unicode character,
is: ':', (u & 0x3f), ((u>>6) & 0x3f), (u>>12).
.TP
.B posix
Allow two files with names that only differ in case.
This option is obsolete.
.TP
.B nonumtail
First try to make a short name without sequence number,
before trying
.IR name\s+3~\s0num.ext .
.TP
.B utf8
UTF8 is the filesystem safe 8-bit encoding of Unicode that is used by the
console.  It can be enabled for the filesystem with this option or disabled
with utf8=0, utf8=no or utf8=false.  If `uni_xlate' gets set, UTF8 gets
disabled.
.TP
.BI shortname= mode
Defines the behavior for creation and display of filenames which fit into
8.3 characters.  If a long name for a file exists, it will always be the
preferred one for display.  There are four \fImode\fRs:
.RS
.TP
.B lower
Force the short name to lower case upon display; store a long name when
the short name is not all upper case.
.TP
.B win95
Force the short name to upper case upon display; store a long name when
the short name is not all upper case.
.TP
.B winnt
Display the short name as is; store a long name when the short name is
not all lower case or all upper case.
.TP
.B mixed
Display the short name as is; store a long name when the short name is not
all upper case.  This mode is the default since Linux 2.6.32.
.RE

.SS "Mount options for usbfs"
.TP
\fBdevuid=\fP\,\fIuid\fP and \fBdevgid=\fP\,\fIgid\fP and \fBdevmode=\fP\,\fImode\fP
Set the owner and group and mode of the device files in the usbfs filesystem
(default: uid=gid=0, mode=0644).  The mode is given in octal.
.TP
\fBbusuid=\fP\,\fIuid\fP and \fBbusgid=\fP\,\fIgid\fP and \fBbusmode=\fP\,\fImode\fP
Set the owner and group and mode of the bus directories in the usbfs
filesystem (default: uid=gid=0, mode=0555).  The mode is given in octal.
.TP
\fBlistuid=\fP\,\fIuid\fP and \fBlistgid=\fP\,\fIgid\fP and \fBlistmode=\fP\,\fImode\fP
Set the owner and group and mode of the file
.I devices
(default: uid=gid=0, mode=0444).  The mode is given in octal.

.SH DM-VERITY SUPPORT (experimental)
The device-mapper verity target provides read-only transparent integrity
checking of block devices using kernel crypto API.  The
.B mount
command can open
the dm-verity device and do the integrity verification before on the device
filesystem is mounted.  Requires libcryptsetup with in libmount.  If
libcryptsetup supports extracting the root hash of an already mounted device,
existing devices will be automatically reused in case of a match.
Mount options for dm-verity:
.TP
\fBverity.hashdevice=\fP\,\fIpath\fP
Path to the hash tree device associated with the source volume to pass to dm-verity.
.TP
\fBverity.roothash=\fP\,\fIhex\fP
Hex-encoded hash of the root of
.I verity.hashdevice
Mutually exclusive with
.I verity.roothashfile.
.TP
\fBverity.roothashfile=\fP\,\fIpath\fP
Path to file containing the hex-encoded hash of the root of
.I verity.hashdevice.
Mutually exclusive with
.I verity.roothash.
.TP
\fBverity.hashoffset=\fP\,\fIoffset\fP
If the hash tree device is embedded in the source volume,
.I offset
(default: 0) is used by dm-verity to get to the tree.
.TP
\fBverity.fecdevice=\fP\,\fIpath\fP
Path to the Forward Error Correction (FEC) device associated with the source volume to pass to dm-verity.
Optional. Requires kernel built with CONFIG_DM_VERITY_FEC.
.TP
\fBverity.fecoffset=\fP\,\fIoffset\fP
If the FEC device is embedded in the source volume,
.I offset
(default: 0) is used by dm-verity to get to the FEC area. Optional.
.TP
\fBverity.fecroots=\fP\,\fIvalue\fP
Parity bytes for FEC (default: 2). Optional.
.TP
\fBverity.roothashsig=\fP\,\fIpath\fP
Path to pkcs7 signature of root hash hex string. Requires crypt_activate_by_signed_key() from cryptsetup and
kernel built with CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG. For device reuse, signatures have to be either used by all
mounts of a device or by none. Optional.
.PP
Supported since util-linux v2.35.
.PP
For example commands:
.sp
.RS
.nf
.B mksquashfs /etc /tmp/etc.squashfs
.B dd if=/dev/zero of=/tmp/etc.hash bs=1M count=10
.B veritysetup format /tmp/etc.squashfs /tmp/etc.hash
.B openssl smime \-sign \-in <hash> \-nocerts \-inkey private.key \-signer private.crt \-noattr \-binary \-outform der \-out /tmp/etc.p7
.B mount \-o verity.hashdevice=/tmp/etc.hash,verity.roothash=<hash>,verity.roothashsig=/tmp/etc.p7 /tmp/etc.squashfs /mnt
.fi
.RE
.sp
create squashfs image from /etc directory, verity hash device
and mount verified filesystem image to /mnt.
The kernel will verify that the root hash is signed by a key from the kernel keyring if roothashsig is used.

.SH LOOP-DEVICE SUPPORT
One further possible type is a mount via the loop device.  For example,
the command
.RS
.sp
.B "mount /tmp/disk.img /mnt \-t vfat \-o loop=/dev/loop3"
.sp
.RE
will set up the loop device
.I /dev/loop3
to correspond to the file
.IR /tmp/disk.img ,
and then mount this device on
.IR /mnt .

If no explicit loop device is mentioned
(but just an option `\fB\-o loop\fP' is given), then
.B mount
will try to find some unused loop device and use that, for example
.RS
.sp
.B "mount /tmp/disk.img /mnt \-o loop"
.sp
.RE
The
.B mount
command
.B automatically
creates a loop device from a regular file if a filesystem type is
not specified or the filesystem is known for libblkid, for example:
.RS
.sp
.B "mount /tmp/disk.img /mnt"
.sp
.B "mount \-t ext4 /tmp/disk.img /mnt"
.sp
.RE
This type of mount knows about three options, namely
.BR loop ", " offset " and " sizelimit ,
that are really options to
.BR \%losetup (8).
(These options can be used in addition to those specific
to the filesystem type.)

Since Linux 2.6.25 auto-destruction of loop devices is supported,
meaning that any loop device allocated by
.B mount
will be freed by
.B umount
independently of
.IR /etc/mtab .

You can also free a loop device by hand, using
.BR "losetup \-d " or " umount \-d" .

Since util-linux v2.29,
.B mount
re-uses the loop device rather than
initializing a new device if the same backing file is already used for some loop
device with the same offset and sizelimit. This is necessary to avoid
a filesystem corruption.

.SH EXIT STATUS
.B mount
has the following exit status values (the bits can be ORed):
.TP
.B 0
success
.TP
.B 1
incorrect invocation or permissions
.TP
.B 2
system error (out of memory, cannot fork, no more loop devices)
.TP
.B 4
internal
.B mount
bug
.TP
.B 8
user interrupt
.TP
.B 16
problems writing or locking /etc/mtab
.TP
.B 32
mount failure
.TP
.B 64
some mount succeeded

The command \fBmount \-a\fR returns 0 (all succeeded), 32 (all failed), or 64 (some
failed, some succeeded).

.SH EXTERNAL HELPERS
The syntax of external mount helpers is:
.sp
.in +4
.BI /sbin/mount. suffix
.I spec dir
.RB [ \-sfnv ]
.RB [ \-N
.IR namespace ]
.RB [ \-o
.IR options ]
.RB [ \-t
.IR type \fB. subtype ]
.in
.sp
where the \fIsuffix\fR is the filesystem type and the \fB\-sfnvoN\fR options have
the same meaning as the normal mount options.  The \fB\-t\fR option is used for
filesystems with subtypes support (for example
.BR "/sbin/mount.fuse \-t fuse.sshfs" ).

The command \fBmount\fR does not pass the mount options
.BR unbindable ,
.BR runbindable ,
.BR private ,
.BR rprivate ,
.BR slave ,
.BR rslave ,
.BR shared ,
.BR rshared ,
.BR auto ,
.BR noauto ,
.BR comment ,
.BR x-* ,
.BR loop ,
.B offset
and
.B sizelimit
to the mount.<suffix> helpers.  All other options are used in a
comma-separated list as an argument to the \fB\-o\fR option.

.SH ENVIRONMENT
.IP LIBMOUNT_FSTAB=<path>
overrides the default location of the
.I fstab
file (ignored for suid)
.IP LIBMOUNT_MTAB=<path>
overrides the default location of the
.I mtab
file (ignored for suid)
.IP LIBMOUNT_DEBUG=all
enables libmount debug output
.IP LIBBLKID_DEBUG=all
enables libblkid debug output
.IP LOOPDEV_DEBUG=all
enables loop device setup debug output
.SH FILES
See also "\fBThe files /etc/fstab, /etc/mtab and /proc/mounts\fR" section above.
.TP 18n
.I /etc/fstab
filesystem table
.TP
.I /run/mount
libmount private runtime directory
.TP
.I /etc/mtab
table of mounted filesystems or symlink to
.I /proc/mounts
.TP
.I /etc/mtab\s+3~\s0
lock file (unused on systems with
.I mtab
symlink)
.TP
.I /etc/mtab.tmp
temporary file (unused on systems with
.I mtab
symlink)
.TP
.I /etc/filesystems
a list of filesystem types to try
.SH HISTORY
A
.B mount
command existed in Version 5 AT&T UNIX.
.SH BUGS
It is possible for a corrupted filesystem to cause a crash.
.PP
Some Linux filesystems don't support
.BR "\-o sync " and " \-o dirsync"
(the ext2, ext3, ext4, fat and vfat filesystems
.I do
support synchronous updates (a la BSD) when mounted with the
.B sync
option).
.PP
The
.B "\-o remount"
may not be able to change mount parameters (all
.IR ext2fs -specific
parameters, except
.BR sb ,
are changeable with a remount, for example, but you can't change
.B gid
or
.B umask
for the
.IR fatfs ).
.PP
It is possible that the files
.I /etc/mtab
and
.I /proc/mounts
don't match on systems with a regular
.I mtab
file.  The first file is based only on
the mount command options, but the content of the second file also depends on
the kernel and others settings (e.g.\& on a remote NFS server -- in certain cases
the mount command may report unreliable information about an NFS mount point
and the
.I /proc/mount
file usually contains more reliable information.)  This is
another reason to replace the
.I mtab
file with a symlink to the
.I /proc/mounts
file.
.PP
Checking files on NFS filesystems referenced by file descriptors (i.e.\& the
.B fcntl
and
.B ioctl
families of functions) may lead to inconsistent results due to the lack of
a consistency check in the kernel even if the
.B noac
mount option is used.
.PP
The
.B loop
option with the
.B offset
or
.B sizelimit
options used may fail when using older kernels if the
.B mount
command can't confirm that the size of the block device has been configured
as requested.  This situation can be worked around by using
the
.B losetup
command manually before calling
.B mount
with the configured loop device.
.SH AUTHORS
.nf
Karel Zak <kzak@redhat.com>
.fi
.SH SEE ALSO
.na
.BR lsblk (1),
.BR mount (2),
.BR umount (2),
.BR fileystems (5),
.BR fstab (5),
.BR nfs (5),
.BR xfs (5),
.BR mount_namespaces (7)
.BR xattr (7)
.BR e2label (8),
.BR findmnt (8),
.BR losetup (8),
.BR mke2fs (8),
.BR mountd (8),
.BR nfsd (8),
.BR swapon (8),
.BR tune2fs (8),
.BR umount (8),
.BR xfs_admin (8)
.ad
.SH AVAILABILITY
The mount command is part of the util-linux package and is available from
https://www.kernel.org/pub/linux/utils/util-linux/.