+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Call SIM_AC_OPTION_ENDIAN.
+ * m4/sim_ac_option_endian.m4: Delete wire & default arguments.
+ * m4/sim_ac_output.m4: Delete sim_alignment & sim_endian.
+ * aclocal.m4, Makefile.in, config.h.in, configure: Regenerate.
+
2021-06-16 Simon Marchi <simon.marchi@polymtl.ca>
* common/Make-common.in (COMPILE, libsim.a, run$(EXEEXT),
$(top_srcdir)/m4/sim_ac_option_alignment.m4 \
$(top_srcdir)/m4/sim_ac_option_assert.m4 \
$(top_srcdir)/m4/sim_ac_option_debug.m4 \
+ $(top_srcdir)/m4/sim_ac_option_endian.m4 \
$(top_srcdir)/m4/sim_ac_option_environment.m4 \
$(top_srcdir)/m4/sim_ac_option_profile.m4 \
$(top_srcdir)/m4/sim_ac_option_stdio.m4 \
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
m4_include([../m4/sim_ac_common.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_warnings.m4])
sim_scache
sim_float
sim_bitsize
-sim_alignment
cgen_breaks
MAINT
MAINTAINER_MODE_FALSE
sim_inline
sim_hw
sim_hw_objs
-sim_hw_cflags
-sim_endian'
+sim_hw_cflags'
ac_subst_files=''
ac_user_opts='
enable_option_checking
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_werror
enable_build_warnings
enable_sim_build_warnings
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10745 "configure"
+#line 10740 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10851 "configure"
+#line 10846 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-wire_endian=""
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN
-
SIM_AC_OUTPUT
m4_include([m4/sim_ac_option_alignment.m4])
m4_include([m4/sim_ac_option_assert.m4])
m4_include([m4/sim_ac_option_debug.m4])
+m4_include([m4/sim_ac_option_endian.m4])
m4_include([m4/sim_ac_option_environment.m4])
m4_include([m4/sim_ac_option_profile.m4])
m4_include([m4/sim_ac_option_stdio.m4])
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
m4_include([../m4/sim_ac_common.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_warnings.m4])
sim_scache
sim_float
sim_bitsize
-sim_alignment
cgen_breaks
MAINT
MAINTAINER_MODE_FALSE
sim_inline
sim_hw
sim_hw_objs
-sim_hw_cflags
-sim_endian'
+sim_hw_cflags'
ac_subst_files=''
ac_user_opts='
enable_option_checking
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_werror
enable_build_warnings
enable_sim_build_warnings
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10745 "configure"
+#line 10740 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10851 "configure"
+#line 10846 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-wire_endian=""
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN
-
SIM_AC_OUTPUT
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * interp.c (sim_open): Set current_target_byte_order.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
m4_include([../m4/sim_ac_common.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_warnings.m4])
sim_scache
sim_float
sim_bitsize
-sim_alignment
cgen_breaks
MAINT
MAINTAINER_MODE_FALSE
sim_inline
sim_hw
sim_hw_objs
-sim_hw_cflags
-sim_endian'
+sim_hw_cflags'
ac_subst_files=''
ac_user_opts='
enable_option_checking
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_werror
enable_build_warnings
enable_sim_build_warnings
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10745 "configure"
+#line 10740 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10851 "configure"
+#line 10846 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-wire_endian="LITTLE"
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(LITTLE)
-
SIM_AC_OUTPUT
/* Set default options before parsing user options. */
current_alignment = STRICT_ALIGNMENT;
+ current_target_byte_order = BFD_ENDIAN_LITTLE;
/* The cpu data is kept in a separately allocated chunk of memory. */
if (sim_cpu_alloc_all (sd, 1) != SIM_RC_OK)
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * interp.c (sim_open): Set current_target_byte_order.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
m4_include([../../lt~obsolete.m4])
m4_include([../m4/sim_ac_common.m4])
m4_include([../m4/sim_ac_option_default_model.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_warnings.m4])
sim_scache
sim_float
sim_bitsize
-sim_alignment
cgen_breaks
SDL_LIBS
SDL_CFLAGS
sim_hw
sim_hw_objs
sim_hw_cflags
-sim_endian
sim_default_model'
ac_subst_files=''
ac_user_opts='
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_sim_default_model
enable_sim_hardware
enable_werror
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-sim-default-model=model
Specify default model to simulate
--enable-sim-hardware=LIST
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10765 "configure"
+#line 10760 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10871 "configure"
+#line 10866 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-wire_endian="LITTLE"
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
default_sim_default_model="bf537"
# Check whether --enable-sim-default-model was given.
if test "${enable_sim_default_model+set}" = set; then :
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(LITTLE)
SIM_AC_OPTION_DEFAULT_MODEL(bf537)
SIM_AC_OPTION_HARDWARE(\
bfin_cec \
/* Set default options before parsing user options. */
current_alignment = STRICT_ALIGNMENT;
+ current_target_byte_order = BFD_ENDIAN_LITTLE;
/* The cpu data is kept in a separately allocated chunk of memory. */
if (sim_cpu_alloc_all (sd, 1) != SIM_RC_OK)
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
m4_include([../m4/sim_ac_option_bitsize.m4])
m4_include([../m4/sim_ac_option_cgen_maint.m4])
m4_include([../m4/sim_ac_option_default_model.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_scache.m4])
LIBOBJS
sim_reserved_bits
sim_float
-sim_alignment
cgen_breaks
cgen
cgendir
sim_hw
sim_hw_objs
sim_hw_cflags
-sim_endian
sim_default_model
sim_bitsize'
ac_subst_files=''
enable_maintainer_mode
enable_sim_inline
enable_sim_bitsize
-enable_sim_endian
enable_sim_scache
enable_sim_default_model
enable_werror
--enable-sim-inline=inlines
Specify which functions should be inlined
--enable-sim-bitsize=N Specify target bitsize (32 or 64)
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-sim-scache=size
Specify simulator execution cache size
--enable-sim-default-model=model
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10758 "configure"
+#line 10753 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10864 "configure"
+#line 10859 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
fi
-wire_endian=""
-default_endian="LITTLE"
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
default_sim_scache="16384"
# Check whether --enable-sim-scache was given.
if test "${enable_sim_scache+set}" = set; then :
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
SIM_AC_OPTION_BITSIZE([64])
-SIM_AC_OPTION_ENDIAN([], [LITTLE])
SIM_AC_OPTION_SCACHE(16384)
SIM_AC_OPTION_DEFAULT_MODEL([bpf-def])
SIM_AC_OPTION_WARNINGS(no)
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * Make-common.in (SIM_ENDIAN): Delete.
+ * sim-config.c (sim_config): Delete WITH_DEFAULT_TARGET_BYTE_ORDER.
+ (sim_config_print): Likewise.
+ * sim-config.h (WITH_TARGET_BYTE_ORDER): Delete.
+ (WITH_DEFAULT_TARGET_BYTE_ORDER): Likewise.
+
2021-06-17 Mike Frysinger <vapier@gentoo.org>
* cgen-trace.c: Include sim/callback.h.
SIM_BITSIZE = @sim_bitsize@
SIM_DEFAULT_MODEL = @sim_default_model@
-SIM_ENDIAN = @sim_endian@
SIM_FLOAT = @sim_float@
SIM_HW_CFLAGS = @sim_hw_cflags@
SIM_HW_OBJS = @sim_hw_objs@
-DHAVE_CONFIG_H \
$(SIM_DEFAULT_MODEL) \
$(SIM_BITSIZE) \
- $(SIM_ENDIAN) \
$(SIM_FLOAT) \
$(SIM_HW_CFLAGS) \
$(SIM_INLINE) \
current_target_byte_order = prefered_target_byte_order;
if (current_target_byte_order == BFD_ENDIAN_UNKNOWN)
current_target_byte_order = WITH_TARGET_BYTE_ORDER;
- if (current_target_byte_order == BFD_ENDIAN_UNKNOWN)
- current_target_byte_order = WITH_DEFAULT_TARGET_BYTE_ORDER;
/* verify the target byte order */
if (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_UNKNOWN)
sim_io_printf (sd, "WITH_TARGET_BYTE_ORDER = %s\n",
config_byte_order_to_a (WITH_TARGET_BYTE_ORDER));
- sim_io_printf (sd, "WITH_DEFAULT_TARGET_BYTE_ORDER = %s\n",
- config_byte_order_to_a (WITH_DEFAULT_TARGET_BYTE_ORDER));
-
sim_io_printf (sd, "HOST_BYTE_ORDER = %s\n",
config_byte_order_to_a (HOST_BYTE_ORDER));
Possible values are BFD_ENDIAN_UNKNOWN, BFD_ENDIAN_LITTLE, or BFD_ENDIAN_BIG. */
-#ifndef WITH_TARGET_BYTE_ORDER
-#define WITH_TARGET_BYTE_ORDER BFD_ENDIAN_UNKNOWN
-#endif
-
-#ifndef WITH_DEFAULT_TARGET_BYTE_ORDER
-#define WITH_DEFAULT_TARGET_BYTE_ORDER BFD_ENDIAN_UNKNOWN
-#endif
-
extern enum bfd_endian current_target_byte_order;
#define CURRENT_TARGET_BYTE_ORDER \
(WITH_TARGET_BYTE_ORDER != BFD_ENDIAN_UNKNOWN \
/* How to route I/O */
#undef WITH_STDIO
+/* Sim endian settings */
+#undef WITH_TARGET_BYTE_ORDER
+
/* Sim trace settings */
#undef WITH_TRACE
enable_sim_alignment
enable_sim_assert
enable_sim_debug
+enable_sim_endian
enable_sim_environment
enable_sim_profile
enable_sim_stdio
--enable-sim-assert Specify whether to perform random assertions
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
itself)
+ --enable-sim-endian=endian
+ Specify target byte endian orientation
--enable-sim-environment=environment
Specify mixed, user, virtual or operating
environment
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $sim_debug" >&5
$as_echo "$sim_debug" >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to force sim endianness" >&5
+$as_echo_n "checking whether to force sim endianness... " >&6; }
+sim_endian=
+# Check whether --enable-sim-endian was given.
+if test "${enable_sim_endian+set}" = set; then :
+ enableval=$enable_sim_endian; case "${enableval}" in
+ b*|B*) sim_endian="BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="BFD_ENDIAN_LITTLE";;
+ yes | no) ;;
+ *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5;;
+esac
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define WITH_TARGET_BYTE_ORDER ${sim_endian:-BFD_ENDIAN_UNKNOWN}
+_ACEOF
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${sim_alignment:-no}" >&5
+$as_echo "${sim_alignment:-no}" >&6; }
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking default sim environment setting" >&5
$as_echo_n "checking default sim environment setting... " >&6; }
SIM_AC_OPTION_ALIGNMENT
SIM_AC_OPTION_ASSERT
SIM_AC_OPTION_DEBUG
+SIM_AC_OPTION_ENDIAN
SIM_AC_OPTION_ENVIRONMENT
SIM_AC_OPTION_PROFILE
SIM_AC_OPTION_STDIO
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * interp.c (sim_open): Set current_target_byte_order.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
m4_include([../m4/sim_ac_common.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_warnings.m4])
sim_scache
sim_float
sim_bitsize
-sim_alignment
cgen_breaks
MAINT
MAINTAINER_MODE_FALSE
sim_inline
sim_hw
sim_hw_objs
-sim_hw_cflags
-sim_endian'
+sim_hw_cflags'
ac_subst_files=''
ac_user_opts='
enable_option_checking
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_werror
enable_build_warnings
enable_sim_build_warnings
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10745 "configure"
+#line 10740 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10851 "configure"
+#line 10846 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-wire_endian="LITTLE"
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(LITTLE)
-
SIM_AC_OUTPUT
SIM_DESC sd = sim_state_alloc (kind, cb);
SIM_ASSERT (STATE_MAGIC (sd) == SIM_MAGIC_NUMBER);
+ /* Set default options before parsing user options. */
+ current_target_byte_order = BFD_ENDIAN_LITTLE;
+
/* The cpu data is kept in a separately allocated chunk of memory. */
if (sim_cpu_alloc_all (sd, 1) != SIM_RC_OK)
{
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * sim-if.c (sim_open): Set current_target_byte_order.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-17 Mike Frysinger <vapier@gentoo.org>
* traps.c: Include sim/callback.h.
m4_include([../m4/sim_ac_common.m4])
m4_include([../m4/sim_ac_option_cgen_maint.m4])
m4_include([../m4/sim_ac_option_default_model.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_scache.m4])
sim_reserved_bits
sim_float
sim_bitsize
-sim_alignment
cgen_breaks
cgen
cgendir
sim_hw
sim_hw_objs
sim_hw_cflags
-sim_endian
sim_default_model'
ac_subst_files=''
ac_user_opts='
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_sim_scache
enable_werror
enable_build_warnings
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-sim-scache=size
Specify simulator execution cache size
--enable-werror treat compile warnings as errors
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10756 "configure"
+#line 10751 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10862 "configure"
+#line 10857 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-wire_endian="LITTLE"
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
default_sim_scache="16384"
# Check whether --enable-sim-scache was given.
if test "${enable_sim_scache+set}" = set; then :
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(LITTLE)
SIM_AC_OPTION_SCACHE(16384)
SIM_AC_OPTION_WARNINGS(no)
SIM_AC_OPTION_HARDWARE(rv cris cris_900000xx)
standard ;-) that the rest of the elements won't be initialized. */
bfd_byte sp_init[4] = {0, 0, 0, 0};
+ /* Set default options before parsing user options. */
+ current_target_byte_order = BFD_ENDIAN_LITTLE;
+
/* The cpu data is kept in a separately allocated chunk of memory. */
if (sim_cpu_alloc_all (sd, 1) != SIM_RC_OK)
{
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
m4_include([../m4/sim_ac_common.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_warnings.m4])
sim_scache
sim_float
sim_bitsize
-sim_alignment
cgen_breaks
MAINT
MAINTAINER_MODE_FALSE
sim_inline
sim_hw
sim_hw_objs
-sim_hw_cflags
-sim_endian'
+sim_hw_cflags'
ac_subst_files=''
ac_user_opts='
enable_option_checking
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_werror
enable_build_warnings
enable_sim_build_warnings
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10745 "configure"
+#line 10740 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10851 "configure"
+#line 10846 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-wire_endian=""
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN
-
SIM_AC_OUTPUT
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim_default_model
sim_scache
sim_float
-sim_endian
sim_bitsize
-sim_alignment
cgen_breaks
READLINE_CFLAGS
READLINE
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10745 "configure"
+#line 10743 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10851 "configure"
+#line 10849 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * interp.c (sim_open): Set current_target_byte_order.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
m4_include([../m4/sim_ac_common.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_warnings.m4])
sim_scache
sim_float
sim_bitsize
-sim_alignment
cgen_breaks
MAINT
MAINTAINER_MODE_FALSE
sim_inline
sim_hw
sim_hw_objs
-sim_hw_cflags
-sim_endian'
+sim_hw_cflags'
ac_subst_files=''
ac_user_opts='
enable_option_checking
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_werror
enable_build_warnings
enable_sim_build_warnings
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10745 "configure"
+#line 10740 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10851 "configure"
+#line 10846 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-wire_endian="LITTLE"
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(LITTLE)
-
SIM_AC_OUTPUT
/* Set default options before parsing user options. */
current_alignment = STRICT_ALIGNMENT;
+ current_target_byte_order = BFD_ENDIAN_LITTLE;
/* The cpu data is kept in a separately allocated chunk of memory. */
if (sim_cpu_alloc_all (sd, 1) != SIM_RC_OK)
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * sim-if.c (sim_open): Set current_target_byte_order.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-17 Mike Frysinger <vapier@gentoo.org>
* traps.c: Include sim/callback.h.
m4_include([../m4/sim_ac_common.m4])
m4_include([../m4/sim_ac_option_cgen_maint.m4])
m4_include([../m4/sim_ac_option_default_model.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_scache.m4])
sim_reserved_bits
sim_float
sim_bitsize
-sim_alignment
cgen_breaks
sim_trapdump
cgen
sim_hw
sim_hw_objs
sim_hw_cflags
-sim_endian
sim_default_model'
ac_subst_files=''
ac_user_opts='
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_sim_scache
enable_sim_default_model
enable_werror
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-sim-scache=size
Specify simulator execution cache size
--enable-sim-default-model=model
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10759 "configure"
+#line 10754 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10865 "configure"
+#line 10860 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-wire_endian="BIG"
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
default_sim_scache="16384"
# Check whether --enable-sim-scache was given.
if test "${enable_sim_scache+set}" = set; then :
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(BIG)
SIM_AC_OPTION_SCACHE(16384)
SIM_AC_OPTION_DEFAULT_MODEL(fr500)
SIM_AC_OPTION_WARNINGS(no)
/* Set default options before parsing user options. */
current_alignment = STRICT_ALIGNMENT;
+ current_target_byte_order = BFD_ENDIAN_BIG;
/* The cpu data is kept in a separately allocated chunk of memory. */
if (sim_cpu_alloc_all (sd, 1) != SIM_RC_OK)
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * interp.c (sim_open): Set current_target_byte_order.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
m4_include([../m4/sim_ac_common.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_warnings.m4])
sim_scache
sim_float
sim_bitsize
-sim_alignment
cgen_breaks
MAINT
MAINTAINER_MODE_FALSE
sim_inline
sim_hw
sim_hw_objs
-sim_hw_cflags
-sim_endian'
+sim_hw_cflags'
ac_subst_files=''
ac_user_opts='
enable_option_checking
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_werror
enable_build_warnings
enable_sim_build_warnings
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10745 "configure"
+#line 10740 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10851 "configure"
+#line 10846 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-wire_endian="LITTLE"
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(LITTLE)
-
SIM_AC_OUTPUT
/* Set default options before parsing user options. */
current_alignment = STRICT_ALIGNMENT;
+ current_target_byte_order = BFD_ENDIAN_LITTLE;
/* The cpu data is kept in a separately allocated chunk of memory. */
if (sim_cpu_alloc_all (sd, 1) != SIM_RC_OK)
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * compile.c (sim_open): Set current_target_byte_order.
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-17 Mike Frysinger <vapier@gentoo.org>
* compile.c: Include sim/callback.h.
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
m4_include([../m4/sim_ac_common.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_warnings.m4])
sd = sim_state_alloc_extra (kind, callback, sizeof (struct h8300_sim_state));
+ /* Set default options before parsing user options. */
+ current_target_byte_order = BFD_ENDIAN_BIG;
+
/* The cpu data is kept in a separately allocated chunk of memory. */
if (sim_cpu_alloc_all (sd, 1) != SIM_RC_OK)
{
sim_scache
sim_float
sim_bitsize
-sim_alignment
cgen_breaks
MAINT
MAINTAINER_MODE_FALSE
sim_inline
sim_hw
sim_hw_objs
-sim_hw_cflags
-sim_endian'
+sim_hw_cflags'
ac_subst_files=''
ac_user_opts='
enable_option_checking
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_werror
enable_build_warnings
enable_sim_build_warnings
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10745 "configure"
+#line 10740 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10851 "configure"
+#line 10846 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-wire_endian="BIG"
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(BIG)
-
SIM_AC_OUTPUT
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * sim-if.c (sim_open): Set current_target_byte_order.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
m4_include([../m4/sim_ac_common.m4])
m4_include([../m4/sim_ac_option_cgen_maint.m4])
m4_include([../m4/sim_ac_option_default_model.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_scache.m4])
sim_reserved_bits
sim_float
sim_bitsize
-sim_alignment
cgen_breaks
cgen
cgendir
sim_hw
sim_hw_objs
sim_hw_cflags
-sim_endian
sim_default_model'
ac_subst_files=''
ac_user_opts='
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_sim_scache
enable_sim_default_model
enable_werror
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-sim-scache=size
Specify simulator execution cache size
--enable-sim-default-model=model
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10756 "configure"
+#line 10751 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10862 "configure"
+#line 10857 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-wire_endian="BIG"
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
default_sim_scache="16384"
# Check whether --enable-sim-scache was given.
if test "${enable_sim_scache+set}" = set; then :
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(BIG)
SIM_AC_OPTION_SCACHE(16384)
SIM_AC_OPTION_DEFAULT_MODEL(iq2000)
SIM_AC_OPTION_WARNINGS(no)
/* Set default options before parsing user options. */
current_alignment = STRICT_ALIGNMENT;
+ current_target_byte_order = BFD_ENDIAN_BIG;
/* The cpu data is kept in a separately allocated chunk of memory. */
if (sim_cpu_alloc_all (sd, 1) != SIM_RC_OK)
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * sim-if.c (sim_open): Set current_target_byte_order.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
m4_include([../m4/sim_ac_common.m4])
m4_include([../m4/sim_ac_option_cgen_maint.m4])
m4_include([../m4/sim_ac_option_default_model.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_scache.m4])
sim_reserved_bits
sim_float
sim_bitsize
-sim_alignment
cgen_breaks
cgen
cgendir
sim_hw
sim_hw_objs
sim_hw_cflags
-sim_endian
sim_default_model'
ac_subst_files=''
ac_user_opts='
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_sim_scache
enable_sim_default_model
enable_werror
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-sim-scache=size
Specify simulator execution cache size
--enable-sim-default-model=model
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10756 "configure"
+#line 10751 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10862 "configure"
+#line 10857 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-wire_endian="BIG"
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
default_sim_scache="16384"
# Check whether --enable-sim-scache was given.
if test "${enable_sim_scache+set}" = set; then :
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(BIG)
SIM_AC_OPTION_SCACHE(16384)
SIM_AC_OPTION_DEFAULT_MODEL(lm32)
SIM_AC_OPTION_WARNINGS(no)
/* Set default options before parsing user options. */
current_alignment = STRICT_ALIGNMENT;
+ current_target_byte_order = BFD_ENDIAN_BIG;
/* The cpu data is kept in a separately allocated chunk of memory. */
if (sim_cpu_alloc_all (sd, 1) != SIM_RC_OK)
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim_default_model
sim_scache
sim_float
-sim_endian
sim_bitsize
-sim_alignment
cgen_breaks
MAINT
MAINTAINER_MODE_FALSE
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10742 "configure"
+#line 10740 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10848 "configure"
+#line 10846 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * sim-if.c (sim_open): Set current_target_byte_order.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
m4_include([../m4/sim_ac_common.m4])
m4_include([../m4/sim_ac_option_cgen_maint.m4])
m4_include([../m4/sim_ac_option_default_model.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_scache.m4])
sim_reserved_bits
sim_float
sim_bitsize
-sim_alignment
cgen_breaks
sim_extra_cflags
traps_obj
sim_hw
sim_hw_objs
sim_hw_cflags
-sim_endian
sim_default_model'
ac_subst_files=''
ac_user_opts='
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_sim_scache
enable_sim_default_model
enable_werror
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-sim-scache=size
Specify simulator execution cache size
--enable-sim-default-model=model
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10758 "configure"
+#line 10753 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10864 "configure"
+#line 10859 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-wire_endian="BIG"
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
default_sim_scache="16384"
# Check whether --enable-sim-scache was given.
if test "${enable_sim_scache+set}" = set; then :
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(BIG)
SIM_AC_OPTION_SCACHE(16384)
SIM_AC_OPTION_DEFAULT_MODEL(m32r/d)
SIM_AC_OPTION_WARNINGS(no)
/* Set default options before parsing user options. */
current_alignment = STRICT_ALIGNMENT;
+ current_target_byte_order = BFD_ENDIAN_BIG;
/* The cpu data is kept in a separately allocated chunk of memory. */
if (sim_cpu_alloc_all (sd, 1) != SIM_RC_OK)
dnl
dnl --enable-sim-endian={yes,no,big,little} is for simulators
dnl that support both big and little endian targets.
-dnl arg[1] is hardwired target endianness.
-dnl arg[2] is default target endianness.
AC_DEFUN([SIM_AC_OPTION_ENDIAN],
-[
-wire_endian="[$1]"
-default_endian="[$2]"
+[dnl
+AC_MSG_CHECKING([whether to force sim endianness])
+sim_endian=
AC_ARG_ENABLE(sim-endian,
[AS_HELP_STRING([--enable-sim-endian=endian],
[Specify target byte endian orientation])],
[case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-endian"); sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi],
-[if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi])dnl
-])
-AC_SUBST(sim_endian)
+ b*|B*) sim_endian="BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="BFD_ENDIAN_LITTLE";;
+ yes | no) ;;
+ *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-endian");;
+esac])dnl
+AC_DEFINE_UNQUOTED([WITH_TARGET_BYTE_ORDER],
+ [${sim_endian:-BFD_ENDIAN_UNKNOWN}], [Sim endian settings])
+AC_MSG_RESULT([${sim_alignment:-no}])
+])dnl
dnl These are unfortunate. They are conditionally called by other sim macros
dnl but always used by common/Make-common.in. So we have to subst here even
dnl when the rest of the code is in the respective macros.
-AC_SUBST(sim_alignment)
AC_SUBST(sim_bitsize)
-AC_SUBST(sim_endian)
AC_SUBST(sim_float)
AC_SUBST(sim_scache)
AC_SUBST(sim_default_model)
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * interp.c (sim_open): Set current_target_byte_order.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-17 Mike Frysinger <vapier@gentoo.org>
* sim-main.h: Delete sim/callback.h include.
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
m4_include([../m4/sim_ac_common.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_warnings.m4])
sim_scache
sim_float
sim_bitsize
-sim_alignment
cgen_breaks
MAINT
MAINTAINER_MODE_FALSE
sim_inline
sim_hw
sim_hw_objs
-sim_hw_cflags
-sim_endian'
+sim_hw_cflags'
ac_subst_files=''
ac_user_opts='
enable_option_checking
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_sim_hardware
enable_werror
enable_build_warnings
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-sim-hardware=LIST
Specify the hardware to be included in the build.
--enable-werror treat compile warnings as errors
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10745 "configure"
+#line 10740 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10851 "configure"
+#line 10846 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-wire_endian="BIG"
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
hardware="cfi core pal glue \
m68hc11 m68hc11sio m68hc11eepr m68hc11tim m68hc11spi nvram"
sim_hw_cflags="-DWITH_HW=1"
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
dnl Options available in this module
-SIM_AC_OPTION_ENDIAN(BIG)
SIM_AC_OPTION_HARDWARE(\
m68hc11 m68hc11sio m68hc11eepr m68hc11tim m68hc11spi nvram)
SIM_ASSERT (STATE_MAGIC (sd) == SIM_MAGIC_NUMBER);
+ /* Set default options before parsing user options. */
+ current_target_byte_order = BFD_ENDIAN_BIG;
+
/* The cpu data is kept in a separately allocated chunk of memory. */
if (sim_cpu_alloc_all (sd, 1) != SIM_RC_OK)
{
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
m4_include([../m4/sim_ac_common.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_warnings.m4])
sim_scache
sim_float
sim_bitsize
-sim_alignment
cgen_breaks
MAINT
MAINTAINER_MODE_FALSE
sim_inline
sim_hw
sim_hw_objs
-sim_hw_cflags
-sim_endian'
+sim_hw_cflags'
ac_subst_files=''
ac_user_opts='
enable_option_checking
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_werror
enable_build_warnings
enable_sim_build_warnings
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10745 "configure"
+#line 10740 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10851 "configure"
+#line 10846 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-wire_endian=""
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN
-
SIM_AC_OUTPUT
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
m4_include([../m4/sim_ac_common.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_warnings.m4])
sim_scache
sim_float
sim_bitsize
-sim_alignment
cgen_breaks
MAINT
MAINTAINER_MODE_FALSE
sim_inline
sim_hw
sim_hw_objs
-sim_hw_cflags
-sim_endian'
+sim_hw_cflags'
ac_subst_files=''
ac_user_opts='
enable_option_checking
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_werror
enable_build_warnings
enable_sim_build_warnings
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10745 "configure"
+#line 10740 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10851 "configure"
+#line 10846 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-wire_endian=""
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN
-
SIM_AC_OUTPUT
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* interp.c (dotrace): Make comment const.
m4_include([../../lt~obsolete.m4])
m4_include([../m4/sim_ac_common.m4])
m4_include([../m4/sim_ac_option_bitsize.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_float.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
LIBOBJS
sim_default_model
sim_scache
-sim_alignment
cgen_breaks
XMKMF
sim_multi_obj
sim_hw_objs
sim_hw_cflags
sim_float
-sim_endian
sim_bitsize'
ac_subst_files=''
ac_user_opts='
enable_build_warnings
enable_sim_build_warnings
enable_sim_reserved_bits
-enable_sim_endian
enable_sim_bitsize
enable_sim_float
enable_sim_hardware
--enable-sim-reserved-bits
Specify whether to check reserved bits in
instruction
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-sim-bitsize=N Specify target bitsize (32 or 64)
--enable-sim-float Specify that the target processor has floating point
hardware
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10773 "configure"
+#line 10768 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10879 "configure"
+#line 10874 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-#
-# Select the byte order of the target
-#
-mips_endian=
-default_endian=
-case "${target}" in
- mips64el*-*-*) mips_endian=LITTLE ;;
- mips64vr*el-*-*) default_endian=LITTLE ;;
- mips64*-*-*) default_endian=BIG ;;
- mips16*-*-*) default_endian=BIG ;;
- mipsisa32*-*-*) default_endian=BIG ;;
- mipsisa64*-*-*) default_endian=BIG ;;
- mips*-*-*) default_endian=BIG ;;
- *) default_endian=BIG ;;
-esac
-
-wire_endian="$mips_endian"
-default_endian="$default_endian"
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
-
-
#
# Select the bitsize of the target
#
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
-#
-# Select the byte order of the target
-#
-mips_endian=
-default_endian=
-case "${target}" in
- mips64el*-*-*) mips_endian=LITTLE ;;
- mips64vr*el-*-*) default_endian=LITTLE ;;
- mips64*-*-*) default_endian=BIG ;;
- mips16*-*-*) default_endian=BIG ;;
- mipsisa32*-*-*) default_endian=BIG ;;
- mipsisa64*-*-*) default_endian=BIG ;;
- mips*-*-*) default_endian=BIG ;;
- *) default_endian=BIG ;;
-esac
-SIM_AC_OPTION_ENDIAN($mips_endian,$default_endian)
-
-
-
#
# Select the bitsize of the target
#
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * interp.c (sim_open): Set current_target_byte_order.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-17 Mike Frysinger <vapier@gentoo.org>
* mn10300_sim.h (u642dw, dw2u64): Change INLINE to INLINE2.
m4_include([../../lt~obsolete.m4])
m4_include([../m4/sim_ac_common.m4])
m4_include([../m4/sim_ac_option_bitsize.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_reserved_bits.m4])
sim_default_model
sim_scache
sim_float
-sim_alignment
cgen_breaks
MAINT
MAINTAINER_MODE_FALSE
sim_hw
sim_hw_objs
sim_hw_cflags
-sim_endian
sim_bitsize'
ac_subst_files=''
ac_user_opts='
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_sim_reserved_bits
enable_sim_bitsize
enable_sim_hardware
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-sim-reserved-bits
Specify whether to check reserved bits in
instruction
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10751 "configure"
+#line 10746 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10857 "configure"
+#line 10852 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-wire_endian="LITTLE"
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
default_sim_reserved_bits="1"
# Check whether --enable-sim-reserved-bits was given.
if test "${enable_sim_reserved_bits+set}" = set; then :
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(LITTLE)
SIM_AC_OPTION_RESERVED_BITS
SIM_AC_OPTION_BITSIZE(32,31)
SIM_AC_OPTION_HARDWARE(mn103cpu mn103int mn103tim mn103ser mn103iop)
SIM_ASSERT (STATE_MAGIC (sd) == SIM_MAGIC_NUMBER);
+ /* Set default options before parsing user options. */
+ current_target_byte_order = BFD_ENDIAN_LITTLE;
+
/* The cpu data is kept in a separately allocated chunk of memory. */
if (sim_cpu_alloc_all (sd, 1) != SIM_RC_OK)
return 0;
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * interp.c (sim_open): Set current_target_byte_order.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
m4_include([../m4/sim_ac_common.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_warnings.m4])
sim_scache
sim_float
sim_bitsize
-sim_alignment
cgen_breaks
DTC
MAINT
sim_inline
sim_hw
sim_hw_objs
-sim_hw_cflags
-sim_endian'
+sim_hw_cflags'
ac_subst_files=''
ac_user_opts='
enable_option_checking
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_werror
enable_build_warnings
enable_sim_build_warnings
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10746 "configure"
+#line 10741 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10852 "configure"
+#line 10847 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-wire_endian="BIG"
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
AC_CHECK_TOOL(DTC, dtc)
-SIM_AC_OPTION_ENDIAN(BIG)
-
SIM_AC_OUTPUT
SIM_DESC sd = sim_state_alloc (kind, cb);
SIM_ASSERT (STATE_MAGIC (sd) == SIM_MAGIC_NUMBER);
+ /* Set default options before parsing user options. */
+ current_target_byte_order = BFD_ENDIAN_BIG;
+
/* The cpu data is kept in a separately allocated chunk of memory. */
if (sim_cpu_alloc_all (sd, 1) != SIM_RC_OK)
{
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * msp430-sim.c (sim_open): Set current_target_byte_order.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
m4_include([../m4/sim_ac_common.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_warnings.m4])
sim_scache
sim_float
sim_bitsize
-sim_alignment
cgen_breaks
MAINT
MAINTAINER_MODE_FALSE
sim_inline
sim_hw
sim_hw_objs
-sim_hw_cflags
-sim_endian'
+sim_hw_cflags'
ac_subst_files=''
ac_user_opts='
enable_option_checking
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_werror
enable_build_warnings
enable_sim_build_warnings
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10745 "configure"
+#line 10740 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10851 "configure"
+#line 10846 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-wire_endian="LITTLE"
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(LITTLE)
-
SIM_AC_OUTPUT
/* Initialise the simulator. */
+ /* Set default options before parsing user options. */
+ current_target_byte_order = BFD_ENDIAN_LITTLE;
+
if (sim_cpu_alloc_all (sd, 1) != SIM_RC_OK)
{
sim_state_free (sd);
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * sim-if.c (sim_open): Set current_target_byte_order.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
m4_include([../m4/sim_ac_option_bitsize.m4])
m4_include([../m4/sim_ac_option_cgen_maint.m4])
m4_include([../m4/sim_ac_option_default_model.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_scache.m4])
LIBOBJS
sim_reserved_bits
sim_float
-sim_alignment
cgen_breaks
cgen
cgendir
sim_hw
sim_hw_objs
sim_hw_cflags
-sim_endian
sim_default_model
sim_bitsize'
ac_subst_files=''
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_sim_bitsize
enable_sim_scache
enable_sim_default_model
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-sim-bitsize=N Specify target bitsize (32 or 64)
--enable-sim-scache=size
Specify simulator execution cache size
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10758 "configure"
+#line 10753 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10864 "configure"
+#line 10859 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-
-wire_endian="BIG"
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
wire_word_bitsize="32"
wire_word_msb="31"
wire_address_bitsize="32"
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(BIG)
SIM_AC_OPTION_BITSIZE([32], [31], [32])
SIM_AC_OPTION_SCACHE(16384)
SIM_AC_OPTION_DEFAULT_MODEL([or1200])
char c;
int i;
+ /* Set default options before parsing user options. */
+ current_target_byte_order = BFD_ENDIAN_BIG;
+
/* The cpu data is kept in a separately allocated chunk of memory. */
if (sim_cpu_alloc_all (sd, 1) != SIM_RC_OK)
{
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * Makefile.in (ENDIAN_CFLAGS): Delete.
+ * configure.ac: Delete sim-endian.
+ * configure: Regenerate.
+
2021-06-17 Mike Frysinger <vapier@gentoo.org>
* igen.c (gen_semantics_h): Rename PAGE_SIZE to MPC860C0_PAGE_SIZE.
RANLIB = @RANLIB@
INLINE_CFLAGS = @sim_inline@
-ENDIAN_CFLAGS = @sim_endian@
SMP_CFLAGS = @sim_smp@
XOR_ENDIAN_CFLAGS = @sim_xor_endian@
BITSIZE_CFLAGS = @sim_bitsize@
WARNING_CFLAGS = @sim_warnings@
DEVZERO_CFLAGS = @sim_devzero@
CONFIG_CFLAGS = \
- $(ENDIAN_CFLAGS) \
$(SMP_CFLAGS) \
$(XOR_ENDIAN_CFLAGS) \
$(BITSIZE_CFLAGS) \
sim_igen_smp
sim_smp
sim_xor_endian
-sim_endian
sim_inline
sim_pk_obj
sim_pk_src
enable_sim_decode_mechanism
enable_sim_default_model
enable_sim_duplicate
-enable_sim_endian
enable_sim_filter
enable_sim_float
enable_sim_hardware
--enable-sim-decode-mechanism=which Specify the instruction decode mechanism.
--enable-sim-default-model=which Specify default PowerPC to model.
--enable-sim-duplicate Expand (duplicate) semantic functions.
- --enable-sim-endian=endian Specify target byte endian orientation.
--enable-sim-filter=rule Specify filter rules.
--enable-sim-float Specify whether the target has hard, soft, altivec or e500 floating point.
--enable-sim-hardware=list Specify the hardware to be included in the build.
fi
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- yes) case "$target" in
- *powerpc-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- *powerpcle-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- *) echo "Unknown target $target" 1>&6; sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
- esac;;
- no) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- sim_endian=""
-fi
-
-
# Check whether --enable-sim-filter was given.
if test "${enable_sim_filter+set}" = set; then :
enableval=$enable_sim_filter; case "${enableval}" in
-
ac_config_files="$ac_config_files Makefile"
fi])dnl
-AC_ARG_ENABLE(sim-endian,
-[ --enable-sim-endian=endian Specify target byte endian orientation.],
-[case "${enableval}" in
- yes) case "$target" in
- *powerpc-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- *powerpcle-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- *) echo "Unknown target $target" 1>&6; sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
- esac;;
- no) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-endian"); sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi],[sim_endian=""])dnl
-
-
AC_ARG_ENABLE(sim-filter,
[ --enable-sim-filter=rule Specify filter rules.],
[case "${enableval}" in
AC_SUBST(sim_pk_src)
AC_SUBST(sim_pk_obj)
AC_SUBST(sim_inline)
-AC_SUBST(sim_endian)
AC_SUBST(sim_xor_endian)
AC_SUBST(sim_smp)
AC_SUBST(sim_igen_smp)
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * interp.c (sim_open): Set current_target_byte_order.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
m4_include([../m4/sim_ac_common.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_warnings.m4])
sim_scache
sim_float
sim_bitsize
-sim_alignment
cgen_breaks
MAINT
MAINTAINER_MODE_FALSE
sim_inline
sim_hw
sim_hw_objs
-sim_hw_cflags
-sim_endian'
+sim_hw_cflags'
ac_subst_files=''
ac_user_opts='
enable_option_checking
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_werror
enable_build_warnings
enable_sim_build_warnings
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10745 "configure"
+#line 10740 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10851 "configure"
+#line 10846 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-wire_endian="LITTLE"
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(LITTLE)
-
SIM_AC_OUTPUT
/* Set default options before parsing user options. */
current_alignment = STRICT_ALIGNMENT;
+ current_target_byte_order = BFD_ENDIAN_LITTLE;
/* The cpu data is kept in a separately allocated chunk of memory. */
if (sim_cpu_alloc_all (sd, 1) != SIM_RC_OK)
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * interp.c (sim_open): Set current_target_byte_order.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
m4_include([../m4/sim_ac_common.m4])
m4_include([../m4/sim_ac_option_bitsize.m4])
m4_include([../m4/sim_ac_option_default_model.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_warnings.m4])
sim_reserved_bits
sim_scache
sim_float
-sim_alignment
cgen_breaks
MAINT
MAINTAINER_MODE_FALSE
sim_hw
sim_hw_objs
sim_hw_cflags
-sim_endian
sim_default_model
sim_bitsize'
ac_subst_files=''
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_sim_default_model
enable_sim_bitsize
enable_werror
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-sim-default-model=model
Specify default model to simulate
--enable-sim-bitsize=N Specify target bitsize (32 or 64)
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10750 "configure"
+#line 10745 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10856 "configure"
+#line 10851 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-
-wire_endian="LITTLE"
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
# Select the default model for the target.
riscv_model=
case "${target}" in
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(LITTLE)
-
# Select the default model for the target.
riscv_model=
case "${target}" in
SIM_DESC sd = sim_state_alloc_extra (kind, callback,
sizeof (struct riscv_sim_state));
+ /* Set default options before parsing user options. */
+ current_target_byte_order = BFD_ENDIAN_LITTLE;
+
/* The cpu data is kept in a separately allocated chunk of memory. */
if (sim_cpu_alloc_all (sd, 1) != SIM_RC_OK)
{
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim_default_model
sim_scache
sim_float
-sim_endian
sim_bitsize
-sim_alignment
cgen_breaks
MAINT
MAINTAINER_MODE_FALSE
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10742 "configure"
+#line 10740 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10848 "configure"
+#line 10846 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim_default_model
sim_scache
sim_float
-sim_endian
sim_bitsize
-sim_alignment
cgen_breaks
sim_cycle_accurate_flags
MAINT
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10746 "configure"
+#line 10744 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10852 "configure"
+#line 10850 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
m4_include([../m4/sim_ac_common.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_warnings.m4])
sim_scache
sim_float
sim_bitsize
-sim_alignment
cgen_breaks
MAINT
MAINTAINER_MODE_FALSE
sim_inline
sim_hw
sim_hw_objs
-sim_hw_cflags
-sim_endian'
+sim_hw_cflags'
ac_subst_files=''
ac_user_opts='
enable_option_checking
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_werror
enable_build_warnings
enable_sim_build_warnings
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10745 "configure"
+#line 10740 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10851 "configure"
+#line 10846 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-wire_endian=""
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN
SIM_AC_OPTION_WARNINGS(no)
SIM_AC_OUTPUT
+2021-06-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+ * interp.c (sim_open): Set current_target_byte_order.
+ * aclocal.m4, configure: Regenerate.
+
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
m4_include([../../lt~obsolete.m4])
m4_include([../m4/sim_ac_common.m4])
m4_include([../m4/sim_ac_option_bitsize.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
m4_include([../m4/sim_ac_option_hardware.m4])
m4_include([../m4/sim_ac_option_inline.m4])
m4_include([../m4/sim_ac_option_reserved_bits.m4])
sim_default_model
sim_scache
sim_float
-sim_alignment
cgen_breaks
MAINT
MAINTAINER_MODE_FALSE
sim_hw
sim_hw_objs
sim_hw_cflags
-sim_endian
sim_bitsize'
ac_subst_files=''
ac_user_opts='
enable_libtool_lock
enable_maintainer_mode
enable_sim_inline
-enable_sim_endian
enable_sim_reserved_bits
enable_sim_bitsize
enable_werror
sometimes confusing) to the casual installer
--enable-sim-inline=inlines
Specify which functions should be inlined
- --enable-sim-endian=endian
- Specify target byte endian orientation
--enable-sim-reserved-bits
Specify whether to check reserved bits in
instruction
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10751 "configure"
+#line 10746 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10857 "configure"
+#line 10852 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-wire_endian="LITTLE"
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
- enableval=$enable_sim_endian; case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi
-fi
-
-
default_sim_reserved_bits="1"
# Check whether --enable-sim-reserved-bits was given.
if test "${enable_sim_reserved_bits+set}" = set; then :
-
-
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
SIM_AC_COMMON
-SIM_AC_OPTION_ENDIAN(LITTLE)
SIM_AC_OPTION_RESERVED_BITS
SIM_AC_OPTION_BITSIZE(32,31)
SIM_ASSERT (STATE_MAGIC (sd) == SIM_MAGIC_NUMBER);
+ /* Set default options before parsing user options. */
+ current_target_byte_order = BFD_ENDIAN_LITTLE;
+
/* The cpu data is kept in a separately allocated chunk of memory. */
if (sim_cpu_alloc_all (sd, 1) != SIM_RC_OK)
return 0;
projects / thirdparty / binutils-gdb.git / commitdiff
