]>
Commit | Line | Data |
---|---|---|
84c7204b MS |
1 | /* |
2 | * Configuration for Xilinx ZynqMP | |
3 | * (C) Copyright 2014 - 2015 Xilinx, Inc. | |
4 | * Michal Simek <michal.simek@xilinx.com> | |
5 | * | |
6 | * Based on Configuration for Versatile Express | |
7 | * | |
8 | * SPDX-License-Identifier: GPL-2.0+ | |
9 | */ | |
10 | ||
11 | #ifndef __XILINX_ZYNQMP_H | |
12 | #define __XILINX_ZYNQMP_H | |
13 | ||
14 | #define CONFIG_REMAKE_ELF | |
15 | ||
16 | /* #define CONFIG_ARMV8_SWITCH_TO_EL1 */ | |
17 | ||
84c7204b MS |
18 | /* Generic Interrupt Controller Definitions */ |
19 | #define CONFIG_GICV2 | |
20 | #define GICD_BASE 0xF9010000 | |
21 | #define GICC_BASE 0xF9020000 | |
22 | ||
d759512f MS |
23 | #define CONFIG_SYS_ALT_MEMTEST |
24 | #define CONFIG_SYS_MEMTEST_SCRATCH 0xfffc0000 | |
25 | ||
8d59d7f6 MS |
26 | #ifndef CONFIG_NR_DRAM_BANKS |
27 | # define CONFIG_NR_DRAM_BANKS 2 | |
28 | #endif | |
29 | #define CONFIG_SYS_MEMTEST_START 0 | |
30 | #define CONFIG_SYS_MEMTEST_END 1000 | |
84c7204b MS |
31 | |
32 | /* Have release address at the end of 256MB for now */ | |
33 | #define CPU_RELEASE_ADDR 0xFFFFFF0 | |
34 | ||
8fbf678b | 35 | #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE |
84c7204b | 36 | |
84c7204b | 37 | /* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */ |
713b6164 MS |
38 | #if !defined(COUNTER_FREQUENCY) |
39 | # define COUNTER_FREQUENCY 100000000 | |
40 | #endif | |
84c7204b MS |
41 | |
42 | /* Size of malloc() pool */ | |
16fa00a7 | 43 | #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x2000000) |
84c7204b MS |
44 | |
45 | /* Serial setup */ | |
636ac181 MS |
46 | #define CONFIG_ARM_DCC |
47 | #define CONFIG_CPU_ARMV8 | |
48 | #define CONFIG_ZYNQ_SERIAL | |
84c7204b MS |
49 | |
50 | #define CONFIG_CONS_INDEX 0 | |
84c7204b MS |
51 | #define CONFIG_SYS_BAUDRATE_TABLE \ |
52 | { 4800, 9600, 19200, 38400, 57600, 115200 } | |
53 | ||
54 | /* Command line configuration */ | |
5cb24200 | 55 | #define CONFIG_MP |
84c7204b | 56 | |
cb7ea820 MS |
57 | /* BOOTP options */ |
58 | #define CONFIG_BOOTP_BOOTFILESIZE | |
59 | #define CONFIG_BOOTP_BOOTPATH | |
60 | #define CONFIG_BOOTP_GATEWAY | |
61 | #define CONFIG_BOOTP_HOSTNAME | |
62 | #define CONFIG_BOOTP_MAY_FAIL | |
a1207de0 MS |
63 | #define CONFIG_BOOTP_DNS |
64 | #define CONFIG_BOOTP_PXE | |
65 | #define CONFIG_BOOTP_SUBNETMASK | |
a1207de0 MS |
66 | |
67 | /* Diff from config_distro_defaults.h */ | |
68 | #define CONFIG_SUPPORT_RAW_INITRD | |
d58fc12e | 69 | #if !defined(CONFIG_SPL_BUILD) |
a1207de0 | 70 | #define CONFIG_ENV_VARS_UBOOT_CONFIG |
d58fc12e | 71 | #endif |
a1207de0 MS |
72 | #define CONFIG_AUTO_COMPLETE |
73 | ||
08aa0334 | 74 | #if defined(CONFIG_MMC_SDHCI_ZYNQ) |
926782cd | 75 | # define CONFIG_SUPPORT_EMMC_BOOT |
f3bd7280 MS |
76 | # ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ |
77 | # define CONFIG_ZYNQ_SDHCI_MAX_FREQ 200000000 | |
78 | # endif | |
6f09d343 SDPP |
79 | # define CONFIG_ENV_IS_IN_FAT |
80 | # define FAT_ENV_DEVICE_AND_PART "0:auto" | |
81 | # define FAT_ENV_FILE "uboot.env" | |
82 | # define FAT_ENV_INTERFACE "mmc" | |
46f68e68 MS |
83 | #endif |
84 | ||
08aa0334 | 85 | #if defined(CONFIG_MMC_SDHCI_ZYNQ) || defined(CONFIG_ZYNQMP_USB) |
84c7204b | 86 | # define CONFIG_FAT_WRITE |
84c7204b MS |
87 | #endif |
88 | ||
78cb965a | 89 | #ifdef CONFIG_NAND_ARASAN |
78cb965a SDPP |
90 | # define CONFIG_CMD_NAND_LOCK_UNLOCK |
91 | # define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
92 | # define CONFIG_SYS_NAND_SELF_INIT | |
93 | # define CONFIG_SYS_NAND_ONFI_DETECTION | |
94 | # define CONFIG_MTD_DEVICE | |
95 | #endif | |
96 | ||
84c7204b MS |
97 | /* Miscellaneous configurable options */ |
98 | #define CONFIG_SYS_LOAD_ADDR 0x8000000 | |
99 | ||
16fa00a7 | 100 | #if defined(CONFIG_ZYNQMP_USB) |
0f676767 | 101 | #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 |
0f676767 | 102 | |
16fa00a7 SDPP |
103 | #define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000 |
104 | #define DFU_DEFAULT_POLL_TIMEOUT 300 | |
16fa00a7 | 105 | #define CONFIG_USB_CABLE_CHECK |
16fa00a7 SDPP |
106 | #define CONFIG_CMD_THOR_DOWNLOAD |
107 | #define CONFIG_USB_FUNCTION_THOR | |
108 | #define CONFIG_THOR_RESET_OFF | |
109 | #define DFU_ALT_INFO_RAM \ | |
110 | "dfu_ram_info=" \ | |
0e43140b | 111 | "setenv dfu_alt_info " \ |
1b19daf4 SDPP |
112 | "Image ram $kernel_addr $kernel_size\\\\;" \ |
113 | "system.dtb ram $fdt_addr $fdt_size\0" \ | |
16fa00a7 SDPP |
114 | "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \ |
115 | "thor_ram=run dfu_ram_info && thordown 0 ram 0\0" | |
116 | ||
117 | #define DFU_ALT_INFO \ | |
118 | DFU_ALT_INFO_RAM | |
5ce987fe SDPP |
119 | |
120 | #ifndef CONFIG_SPL_BUILD | |
121 | # define CONFIG_USB_FUNCTION_FASTBOOT | |
122 | # define CONFIG_CMD_FASTBOOT | |
123 | # define CONFIG_ANDROID_BOOT_IMAGE | |
124 | # define CONFIG_FASTBOOT_BUF_ADDR 0x100000 | |
125 | # define CONFIG_FASTBOOT_BUF_SIZE 0x6000000 | |
126 | # define CONFIG_FASTBOOT_FLASH | |
08aa0334 | 127 | # ifdef CONFIG_MMC_SDHCI_ZYNQ |
5ce987fe SDPP |
128 | # define CONFIG_FASTBOOT_FLASH_MMC_DEV 0 |
129 | # endif | |
5ce987fe SDPP |
130 | |
131 | # define CONFIG_RANDOM_UUID | |
132 | # define PARTS_DEFAULT \ | |
133 | "partitions=uuid_disk=${uuid_gpt_disk};" \ | |
134 | "name=""boot"",size=16M,uuid=${uuid_gpt_boot};" \ | |
135 | "name=""Linux"",size=-M,uuid=${uuid_gpt_Linux}\0" | |
136 | #endif | |
16fa00a7 SDPP |
137 | #endif |
138 | ||
139 | #if !defined(DFU_ALT_INFO) | |
140 | # define DFU_ALT_INFO | |
141 | #endif | |
142 | ||
5ce987fe SDPP |
143 | #if !defined(PARTS_DEFAULT) |
144 | # define PARTS_DEFAULT | |
145 | #endif | |
146 | ||
84c7204b | 147 | /* Do not preserve environment */ |
6f09d343 | 148 | #if !defined(CONFIG_ENV_IS_IN_FAT) |
84c7204b | 149 | #define CONFIG_ENV_IS_NOWHERE 1 |
6f09d343 | 150 | #endif |
936b0384 | 151 | #define CONFIG_ENV_SIZE 0x8000 |
84c7204b MS |
152 | |
153 | /* Monitor Command Prompt */ | |
154 | /* Console I/O Buffer Size */ | |
155 | #define CONFIG_SYS_CBSIZE 2048 | |
84c7204b MS |
156 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ |
157 | sizeof(CONFIG_SYS_PROMPT) + 16) | |
84c7204b MS |
158 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE |
159 | #define CONFIG_SYS_LONGHELP | |
160 | #define CONFIG_CMDLINE_EDITING | |
161 | #define CONFIG_SYS_MAXARGS 64 | |
162 | ||
cb7ea820 | 163 | /* Ethernet driver */ |
596e5782 | 164 | #if defined(CONFIG_ZYNQ_GEM) |
cb7ea820 | 165 | # define CONFIG_NET_MULTI |
cb7ea820 MS |
166 | # define CONFIG_MII |
167 | # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN | |
cb7ea820 | 168 | # define CONFIG_PHY_MARVELL |
f96fe2c0 | 169 | # define CONFIG_PHY_NATSEMI |
bf146325 | 170 | # define CONFIG_PHY_TI |
c4c96f2b | 171 | # define CONFIG_PHY_GIGE |
a1a6af82 MS |
172 | # define CONFIG_PHY_VITESSE |
173 | # define CONFIG_PHY_REALTEK | |
e2928f32 | 174 | # define PHY_ANEG_TIMEOUT 20000 |
cb7ea820 MS |
175 | #endif |
176 | ||
2594e03c SDPP |
177 | /* I2C */ |
178 | #if defined(CONFIG_SYS_I2C_ZYNQ) | |
2594e03c SDPP |
179 | # define CONFIG_SYS_I2C |
180 | # define CONFIG_SYS_I2C_ZYNQ_SPEED 100000 | |
181 | # define CONFIG_SYS_I2C_ZYNQ_SLAVE 0 | |
182 | #endif | |
183 | ||
2594e03c SDPP |
184 | /* EEPROM */ |
185 | #ifdef CONFIG_ZYNQMP_EEPROM | |
2594e03c SDPP |
186 | # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 |
187 | # define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 | |
188 | # define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 | |
189 | # define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 | |
190 | # define CONFIG_SYS_EEPROM_SIZE (64 * 1024) | |
191 | #endif | |
192 | ||
0d169b8c | 193 | #ifdef CONFIG_SATA_CEVA |
6fe6f135 MS |
194 | #define CONFIG_LIBATA |
195 | #define CONFIG_SCSI_AHCI | |
679b994a | 196 | #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 |
6fe6f135 MS |
197 | #define CONFIG_SYS_SCSI_MAX_LUN 1 |
198 | #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ | |
199 | CONFIG_SYS_SCSI_MAX_LUN) | |
c649e3c9 | 200 | #define CONFIG_SCSI |
6fe6f135 MS |
201 | #endif |
202 | ||
84c7204b MS |
203 | #define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024) |
204 | ||
84c7204b MS |
205 | #define CONFIG_BOARD_EARLY_INIT_R |
206 | #define CONFIG_CLOCKS | |
207 | ||
b72894f1 MS |
208 | #define ENV_MEM_LAYOUT_SETTINGS \ |
209 | "fdt_high=10000000\0" \ | |
210 | "initrd_high=10000000\0" \ | |
211 | "fdt_addr_r=0x40000000\0" \ | |
212 | "pxefile_addr_r=0x10000000\0" \ | |
213 | "kernel_addr_r=0x18000000\0" \ | |
214 | "scriptaddr=0x02000000\0" \ | |
215 | "ramdisk_addr_r=0x02100000\0" \ | |
216 | ||
08aa0334 | 217 | #if defined(CONFIG_MMC_SDHCI_ZYNQ) |
b72894f1 MS |
218 | # define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1) |
219 | #else | |
220 | # define BOOT_TARGET_DEVICES_MMC(func) | |
221 | #endif | |
222 | ||
223 | #if defined(CONFIG_SATA_CEVA) | |
224 | # define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) | |
225 | #else | |
226 | # define BOOT_TARGET_DEVICES_SCSI(func) | |
227 | #endif | |
228 | ||
229 | #if defined(CONFIG_ZYNQMP_USB) | |
230 | # define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) func(USB, usb, 1) | |
231 | #else | |
232 | # define BOOT_TARGET_DEVICES_USB(func) | |
233 | #endif | |
234 | ||
235 | #define BOOT_TARGET_DEVICES(func) \ | |
236 | BOOT_TARGET_DEVICES_MMC(func) \ | |
237 | BOOT_TARGET_DEVICES_USB(func) \ | |
238 | BOOT_TARGET_DEVICES_SCSI(func) \ | |
239 | func(PXE, pxe, na) \ | |
240 | func(DHCP, dhcp, na) | |
241 | ||
242 | #include <config_distro_bootcmd.h> | |
243 | ||
244 | /* Initial environment variables */ | |
245 | #ifndef CONFIG_EXTRA_ENV_SETTINGS | |
246 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
247 | ENV_MEM_LAYOUT_SETTINGS \ | |
248 | BOOTENV \ | |
249 | DFU_ALT_INFO | |
250 | #endif | |
251 | ||
d58fc12e MS |
252 | /* SPL can't handle all huge variables - define just DFU */ |
253 | #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT) | |
254 | #undef CONFIG_EXTRA_ENV_SETTINGS | |
255 | # define CONFIG_EXTRA_ENV_SETTINGS \ | |
256 | "dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \ | |
257 | "atf-uboot.ub ram 0x10000000 0x1000000;" \ | |
258 | "Image ram 0x80000 0x3f80000;" \ | |
259 | "system.dtb ram 0x4000000 0x100000\0" \ | |
260 | "dfu_bufsiz=0x1000\0" | |
261 | #endif | |
262 | ||
e6a9ed04 | 263 | #define CONFIG_SPL_TEXT_BASE 0xfffc0000 |
8fbf678b | 264 | #define CONFIG_SPL_STACK 0xfffffffc |
d58fc12e | 265 | #define CONFIG_SPL_MAX_SIZE 0x40000 |
e6a9ed04 MS |
266 | |
267 | /* Just random location in OCM */ | |
8ed31f36 MS |
268 | #define CONFIG_SPL_BSS_START_ADDR 0x0 |
269 | #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 | |
e6a9ed04 MS |
270 | |
271 | #define CONFIG_SPL_FRAMEWORK | |
e6a9ed04 | 272 | |
e6a9ed04 MS |
273 | /* u-boot is like dtb */ |
274 | #define CONFIG_SPL_FS_LOAD_ARGS_NAME "u-boot.bin" | |
275 | #define CONFIG_SYS_SPL_ARGS_ADDR 0x8000000 | |
276 | ||
277 | /* ATF is my kernel image */ | |
1309f671 | 278 | #define CONFIG_SPL_FS_LOAD_KERNEL_NAME "atf-uboot.ub" |
e6a9ed04 MS |
279 | |
280 | /* FIT load address for RAM boot */ | |
281 | #define CONFIG_SPL_LOAD_FIT_ADDRESS 0x10000000 | |
282 | ||
283 | /* MMC support */ | |
08aa0334 | 284 | #ifdef CONFIG_MMC_SDHCI_ZYNQ |
e6a9ed04 MS |
285 | # define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 |
286 | # define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* unused */ | |
287 | # define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* unused */ | |
288 | # define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0 /* unused */ | |
e6a9ed04 MS |
289 | # define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" |
290 | #endif | |
291 | ||
d58fc12e MS |
292 | #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT) |
293 | # undef CONFIG_CMD_BOOTD | |
294 | # define CONFIG_SPL_ENV_SUPPORT | |
295 | # define CONFIG_SPL_HASH_SUPPORT | |
296 | # define CONFIG_ENV_MAX_ENTRIES 10 | |
297 | ||
298 | # define CONFIG_SYS_SPL_MALLOC_START 0x20000000 | |
299 | # define CONFIG_SYS_SPL_MALLOC_SIZE 0x10000000 | |
300 | ||
301 | #ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE | |
302 | # error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used" | |
303 | #endif | |
304 | #endif | |
305 | ||
84c7204b | 306 | #endif /* __XILINX_ZYNQMP_H */ |