Originally pointed out by Laurent Pinchart <laurent.pinchart@tbox.biz>,
see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/22846
- Signed-off-by: Bernhard Nemec <bnemec <at> ganssloser.com>
+ Signed-off-by: Bernhard Nemec <bnemec@ganssloser.com>
commit 84d0c2f1e39caff58bf765a7ab7c72da23c25ec8
Author: Kim B. Heino <Kim.Heino@bluegiga.com>
86xx: Convert sbc8641d to use libfdt.
This is the proper fix for a missing closing brace in the function
- ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
+ ft_cpu_setup() noticed by joe.hamman@embeddedspecialties.com.
The ft_cpu_setup() function in mpc8641hpcn.c should have been
removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
but was missed. Only, the sbc8641d was nominally still using it.
We already have a vendor subdir for Atmel, so we should use it.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
commit 6d0943a6be99977d6d853d51749e9963d68eb192
Author: Andreas Engel <andreas.engel@ericsson.com>
AT91CAP9 support : MACB changes
- Signed-off-by: Stelian Pop <stelian <at> popies.net>
- Acked-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
commit 6afcabf11d7321850f4feaadfee841488ace54c5
Author: Stelian Pop <stelian@popies.net>
AT91CAP9 support : cpu/ files
- Signed-off-by: Stelian Pop <stelian <at> popies.net>
+ Signed-off-by: Stelian Pop <stelian@popies.net>
commit fa506a926cec348805143576c941f8e61b333cc0
Author: Stelian Pop <stelian@popies.net>
E: arsenio@tin.it
D: FADS823 configuration, MPC823 video support, I2C, wireless keyboard, lots more
+N: Andre Schwarz
+E: andre.schwarz@matrix-vision.de
+D: Support for Matrix Vision boards (MVBLM7)
+
N: Robert Schwebel
E: r.schwebel@pengutronix.de
D: Support for csb226, logodl and innokom boards (PXA2xx)
ML2 PPC4xx
+Andre Schwarz <andre.schwarz@matrix-vision.de>
+
+ mvblm7 MPC8343
+
Timur Tabi <timur@freescale.com>
MPC8349E-mITX MPC8349
at91cap9adk ARM926EJS (AT91CAP9 SoC)
at91sam9260ek ARM926EJS (AT91SAM9260 SoC)
+ at91sam9261ek ARM926EJS (AT91SAM9261 SoC)
+ at91sam9263ek ARM926EJS (AT91SAM9263 SoC)
+ at91sam9rlek ARM926EJS (AT91SAM9RL SoC)
Stefan Roese <sr@denx.de>
ATSTK1002 AT32AP7000
ATSTK1003 AT32AP7001
ATSTK1004 AT32AP7002
+ ATSTK1006 AT32AP7000
ATNGW100 AT32AP7000
#########################################################################
MPC8360ERDK_66 \
MPC837XEMDS \
MPC837XERDB \
+ MVBLM7 \
sbc8349 \
TQM834x \
"
stxssa \
TQM8540 \
TQM8541 \
+ TQM8548 \
TQM8555 \
TQM8560 \
"
at91cap9adk \
at91rm9200dk \
at91sam9260ek \
+ at91sam9261ek \
+ at91sam9263ek \
+ at91sam9rlek \
cmc_pu2 \
ap920t \
ap922_XA10 \
mx31ads \
"
+#########################################################################
+## AT91 Systems
+#########################################################################
+
+LIST_at91=" \
+ at91cap9adk \
+ at91rm9200dk \
+ at91sam9260ek \
+ at91sam9261ek \
+ at91sam9263ek \
+ at91sam9rlek \
+ cmc_pu2 \
+ csb637 \
+ kb9202 \
+ mp2usb \
+ m501sk \
+"
+
#########################################################################
## Xscale Systems
#########################################################################
atstk1002 \
atstk1003 \
atstk1004 \
+ atstk1006 \
atngw100 \
"
for arg in $@
do
case "$arg" in
- arm|SA|ARM7|ARM9|ARM10|ARM11|ixp|pxa \
+ arm|SA|ARM7|ARM9|ARM10|ARM11|at91|ixp|pxa \
|avr32 \
|blackfin \
|coldfire \
LIBS += drivers/mtd/nand/libnand.a
LIBS += drivers/mtd/nand_legacy/libnand_legacy.a
LIBS += drivers/mtd/onenand/libonenand.a
+LIBS += drivers/mtd/spi/libspi_flash.a
LIBS += drivers/net/libnet.a
LIBS += drivers/net/sk98lin/libsk98lin.a
LIBS += drivers/pci/libpci.a
TAG_SUBDIRS += drivers/mtd/nand
TAG_SUBDIRS += drivers/mtd/nand_legacy
TAG_SUBDIRS += drivers/mtd/onenand
+TAG_SUBDIRS += drivers/mtd/spi
TAG_SUBDIRS += drivers/net
TAG_SUBDIRS += drivers/net/sk98lin
TAG_SUBDIRS += drivers/pci
#########################################################################
aev_config: unconfig
- @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200
+ @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc
BC3450_config: unconfig
@$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450
@$(MKCONFIG) -a PM520 ppc mpc5xxx pm520
smmaco4_config: unconfig
- @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200
+ @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc
cm5200_config: unconfig
@$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200
spieval_config: unconfig
- @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200
+ @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc
TB5200_B_config \
TB5200_config: unconfig
{ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
$(XECHO) "... with MPC5200B processor" ; \
}
- @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200
+ @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc
MINI5200_config \
EVAL5200_config \
TQM5200_config \
TQM5200_STK100_config: unconfig
@mkdir -p $(obj)include
- @mkdir -p $(obj)board/tqm5200
+ @mkdir -p $(obj)board/tqc/tqm5200
@[ -z "$(findstring cam5200,$@)" ] || \
{ echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \
echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \
@[ -z "$(findstring HIGHBOOT,$@)" ] || \
{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
}
- @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200
+ @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc
uc101_config: unconfig
@$(MKCONFIG) uc101 ppc mpc5xxx uc101
motionpro_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes
HMI10_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
IAD210_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens
@$(MKCONFIG) -a RRvision ppc mpc8xx RRvision
SM850_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
spc1920_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920
echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \
$(XECHO) "... with LCD display" ; \
}
- @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx
+ @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc
TTTech_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
- @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx
+ @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
uc100_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
- @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx
+ @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
#########################################################################
## PPC4xx Systems
echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
$(XECHO) "... without 60x Bus Mode" ; \
fi
- @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260
+ @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc
TQM8272_config: unconfig
- @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272
+ @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc
VoVPN-GW_66MHz_config \
VoVPN-GW_100MHz_config: unconfig
MPC837XERDB_config: unconfig
@$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale
+MVBLM7_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7
+
sbc8349_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349
TQM834x_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x
+ @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
#########################################################################
TQM8540_config \
TQM8541_config \
+TQM8548_config \
TQM8555_config \
TQM8560_config: unconfig
@mkdir -p $(obj)include
echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
- echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h; \
- echo "#define CFG_BOOTFILE_PATH \"/tftpboot/tqm$${CTYPE}/uImage\"">>$(obj)include/config.h
- @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx
+ echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h;
+ @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
#########################################################################
## MPC86xx Systems
at91rm9200dk_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
+at91sam9261ek_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91sam9
+
+at91sam9263ek_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91sam9
+
+at91sam9rlek_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91sam9
+
cmc_pu2_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
atstk1004_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+atstk1006_config : unconfig
+ @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+
atngw100_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
display); also select one of the supported displays
by defining one of these:
+ CONFIG_ATMEL_LCD:
+
+ HITACHI TX09D70VM1CCA, 3.5", 240x320.
+
CONFIG_NEC_NL6448AC33:
NEC NL6448AC33-18. Active, color, single scan.
return (unsigned char)gpio_read_in_bit(SPI_DIN_GPIO15);
}
-void taihu_spi_chipsel(int cs)
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
- gpio_write_bit(SPI_CS_GPIO0, cs);
+ return bus == 0 && cs == 0;
}
-spi_chipsel_type spi_chipsel[]= {
- taihu_spi_chipsel
-};
+void spi_cs_activate(struct spi_slave *slave)
+{
+ gpio_write_bit(SPI_CS_GPIO0, 1);
+}
-int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ gpio_write_bit(SPI_CS_GPIO0, 0);
+}
#ifdef CONFIG_PCI
static unsigned char int_lines[32] = {
# (C) Copyright 2003-2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
# See file CREDITS for list of people who contributed to this
# project.
#
#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/io.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
#include <net.h>
#endif
#endif
}
+static void at91cap9_slowclock_hw_init(void)
+{
+ /*
+ * On AT91CAP9 revC CPUs, the slow clock can be based on an
+ * internal impreciseRC oscillator or an external 32kHz oscillator.
+ * Switch to the latter.
+ */
+#define ARCH_ID_AT91CAP9_REVB 0x399
+#define ARCH_ID_AT91CAP9_REVC 0x601
+ if (at91_sys_read(AT91_PMC_VER) == ARCH_ID_AT91CAP9_REVC) {
+ unsigned i, tmp = at91_sys_read(AT91_SCKCR);
+ if ((tmp & AT91CAP9_SCKCR_OSCSEL) == AT91CAP9_SCKCR_OSCSEL_RC) {
+ extern void timer_init(void);
+ timer_init();
+ tmp |= AT91CAP9_SCKCR_OSC32EN;
+ at91_sys_write(AT91_SCKCR, tmp);
+ for (i = 0; i < 1200; i++)
+ udelay(1000);
+ tmp |= AT91CAP9_SCKCR_OSCSEL_32;
+ at91_sys_write(AT91_SCKCR, tmp);
+ udelay(200);
+ tmp &= ~AT91CAP9_SCKCR_RCEN;
+ at91_sys_write(AT91_SCKCR, tmp);
+ }
+ }
+}
+
static void at91cap9_nor_hw_init(void)
{
unsigned long csa;
at91_sys_write(AT91_SMC_MODE(3),
AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
AT91_SMC_EXNWMODE_DISABLE |
- AT91_SMC_DBW_8 | AT91_SMC_TDF_(1));
+#ifdef CFG_NAND_DBW_16
+ AT91_SMC_DBW_16 |
+#else /* CFG_NAND_DBW_8 */
+ AT91_SMC_DBW_8 |
+#endif
+ AT91_SMC_TDF_(1));
at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD);
}
#endif
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+ vl_col: 240,
+ vl_row: 320,
+ vl_clk: 4965000,
+ vl_sync: ATMEL_LCDC_INVLINE_INVERTED |
+ ATMEL_LCDC_INVFRAME_INVERTED,
+ vl_bpix: 3,
+ vl_tft: 1,
+ vl_hsync_len: 5,
+ vl_left_margin: 1,
+ vl_right_margin:33,
+ vl_vsync_len: 1,
+ vl_upper_margin:1,
+ vl_lower_margin:0,
+ mmio: AT91CAP9_LCDC_BASE,
+};
+
+void lcd_enable(void)
+{
+ at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */
+}
+
+void lcd_disable(void)
+{
+ at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */
+}
+
+static void at91cap9_lcd_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
+ at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
+ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
+ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
+ at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
+ at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
+ at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
+ at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
+ at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
+ at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
+ at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
+ at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */
+ at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
+ at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
+ at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
+ at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
+ at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
+ at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */
+ at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
+ at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
+
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_LCDC);
+
+ gd->fb_base = 0;
+}
+#endif
+
int board_init(void)
{
/* Enable Ctrlc */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
at91cap9_serial_hw_init();
+ at91cap9_slowclock_hw_init();
at91cap9_nor_hw_init();
#ifdef CONFIG_CMD_NAND
at91cap9_nand_hw_init();
#ifdef CONFIG_USB_OHCI_NEW
at91cap9_uhp_hw_init();
#endif
-
+#ifdef CONFIG_LCD
+ at91cap9_lcd_hw_init();
+#endif
return 0;
}
int board_nand_init(struct nand_chip *nand)
{
nand->eccmode = NAND_ECC_SOFT;
+#ifdef CFG_NAND_DBW_16
+ nand->options = NAND_BUSWIDTH_16;
+#endif
nand->hwcontrol = at91cap9adk_nand_hwcontrol;
nand->chip_delay = 20;
# (C) Copyright 2003-2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
# See file CREDITS for list of people who contributed to this
# project.
#
at91_sys_write(AT91_SMC_MODE(3),
AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
AT91_SMC_EXNWMODE_DISABLE |
- AT91_SMC_DBW_8 | AT91_SMC_TDF_(2));
+#ifdef CFG_NAND_DBW_16
+ AT91_SMC_DBW_16 |
+#else /* CFG_NAND_DBW_8 */
+ AT91_SMC_DBW_8 |
+#endif
+ AT91_SMC_TDF_(2));
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC);
int board_nand_init(struct nand_chip *nand)
{
nand->eccmode = NAND_ECC_SOFT;
+#ifdef CFG_NAND_DBW_16
+ nand->options = NAND_BUSWIDTH_16;
+#endif
nand->hwcontrol = at91sam9260ek_nand_hwcontrol;
nand->dev_ready = at91sam9260ek_nand_ready;
nand->chip_delay = 20;
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- cpu/arm926ejs/start.o (.text)
- *(.text)
- }
-
- . = ALIGN(4);
- .rodata : { *(.rodata) }
-
- . = ALIGN(4);
- .data : { *(.data) }
-
- . = ALIGN(4);
- .got : { *(.got) }
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- . = ALIGN(4);
- __bss_start = .;
- .bss : { *(.bss) }
- _end = .;
-}
--- /dev/null
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-y += at91sam9261ek.o
+COBJS-y += led.o
+COBJS-y += partition.o
+COBJS-$(CONFIG_CMD_NAND) += nand.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9261.h>
+#include <asm/arch/at91sam9261_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_DRIVER_DM9000)
+#include <net.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+static void at91sam9261ek_serial_hw_init(void)
+{
+#ifdef CONFIG_USART0
+ at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+#endif
+
+#ifdef CONFIG_USART1
+ at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+#endif
+
+#ifdef CONFIG_USART2
+ at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+#endif
+
+#ifdef CONFIG_USART3 /* DBGU */
+ at91_set_A_periph(AT91_PIN_PA9, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PA10, 1); /* DTXD */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+#endif
+}
+
+#ifdef CONFIG_CMD_NAND
+static void at91sam9261ek_nand_hw_init(void)
+{
+ unsigned long csa;
+
+ /* Enable CS3 */
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA,
+ csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ at91_sys_write(AT91_SMC_SETUP(3),
+ AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(3),
+ AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5) |
+ AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+ at91_sys_write(AT91_SMC_CYCLE(3),
+ AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+ at91_sys_write(AT91_SMC_MODE(3),
+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_DISABLE |
+#ifdef CFG_NAND_DBW_16
+ AT91_SMC_DBW_16 |
+#else /* CFG_NAND_DBW_8 */
+ AT91_SMC_DBW_8 |
+#endif
+ AT91_SMC_TDF_(1));
+
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOC);
+
+ /* Configure RDY/BSY */
+ at91_set_gpio_input(AT91_PIN_PC15, 1);
+
+ /* Enable NandFlash */
+ at91_set_gpio_output(AT91_PIN_PC14, 1);
+
+ at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */
+ at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */
+}
+#endif
+
+#ifdef CONFIG_HAS_DATAFLASH
+static void at91sam9261ek_spi_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PA3, 0); /* SPI0_NPCS0 */
+
+ at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
+
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_SPI0);
+}
+#endif
+
+#ifdef CONFIG_DRIVER_DM9000
+static void at91sam9261ek_dm9000_hw_init(void)
+{
+ /* Configure SMC CS2 for DM9000 */
+ at91_sys_write(AT91_SMC_SETUP(2),
+ AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(2),
+ AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) |
+ AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8));
+ at91_sys_write(AT91_SMC_CYCLE(2),
+ AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
+ at91_sys_write(AT91_SMC_MODE(2),
+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_DISABLE |
+ AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 |
+ AT91_SMC_TDF_(1));
+
+ /* Configure Reset signal as output */
+ at91_set_gpio_output(AT91_PIN_PC10, 0);
+
+ /* Configure Interrupt pin as input, no pull-up */
+ at91_set_gpio_input(AT91_PIN_PC11, 0);
+}
+#endif
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+ vl_col: 240,
+ vl_row: 320,
+ vl_clk: 4965000,
+ vl_sync: ATMEL_LCDC_INVLINE_INVERTED |
+ ATMEL_LCDC_INVFRAME_INVERTED,
+ vl_bpix: 3,
+ vl_tft: 1,
+ vl_hsync_len: 5,
+ vl_left_margin: 1,
+ vl_right_margin:33,
+ vl_vsync_len: 1,
+ vl_upper_margin:1,
+ vl_lower_margin:0,
+ mmio: AT91SAM9261_LCDC_BASE,
+};
+
+void lcd_enable(void)
+{
+ at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */
+}
+
+void lcd_disable(void)
+{
+ at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */
+}
+
+static void at91sam9261ek_lcd_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
+ at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */
+ at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */
+ at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */
+ at91_set_A_periph(AT91_PIN_PB9, 0); /* LCDD4 */
+ at91_set_A_periph(AT91_PIN_PB10, 0); /* LCDD5 */
+ at91_set_A_periph(AT91_PIN_PB11, 0); /* LCDD6 */
+ at91_set_A_periph(AT91_PIN_PB12, 0); /* LCDD7 */
+ at91_set_A_periph(AT91_PIN_PB15, 0); /* LCDD10 */
+ at91_set_A_periph(AT91_PIN_PB16, 0); /* LCDD11 */
+ at91_set_A_periph(AT91_PIN_PB17, 0); /* LCDD12 */
+ at91_set_A_periph(AT91_PIN_PB18, 0); /* LCDD13 */
+ at91_set_A_periph(AT91_PIN_PB19, 0); /* LCDD14 */
+ at91_set_A_periph(AT91_PIN_PB20, 0); /* LCDD15 */
+ at91_set_B_periph(AT91_PIN_PB23, 0); /* LCDD18 */
+ at91_set_B_periph(AT91_PIN_PB24, 0); /* LCDD19 */
+ at91_set_B_periph(AT91_PIN_PB25, 0); /* LCDD20 */
+ at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */
+ at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */
+ at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */
+
+ at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1);
+
+ gd->fb_base = AT91SAM9261_SRAM_BASE;
+}
+#endif
+
+int board_init(void)
+{
+ /* Enable Ctrlc */
+ console_init_f();
+
+ /* arch number of AT91SAM9261EK-Board */
+ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9261EK;
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ at91sam9261ek_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+ at91sam9261ek_nand_hw_init();
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+ at91sam9261ek_spi_hw_init();
+#endif
+#ifdef CONFIG_DRIVER_DM9000
+ at91sam9261ek_dm9000_hw_init();
+#endif
+#ifdef CONFIG_LCD
+ at91sam9261ek_lcd_hw_init();
+#endif
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+ return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+#ifdef CONFIG_DRIVER_DM9000
+ /*
+ * Initialize ethernet HW addr prior to starting Linux,
+ * needed for nfsroot
+ */
+ eth_init(gd->bd);
+#endif
+}
+#endif
--- /dev/null
+TEXT_BASE = 0x23f00000
--- /dev/null
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9261.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+#define RED_LED AT91_PIN_PA23 /* this is the power led */
+#define GREEN_LED AT91_PIN_PA13 /* this is the user1 led */
+#define YELLOW_LED AT91_PIN_PA14 /* this is the user2 led */
+
+void red_LED_on(void)
+{
+ at91_set_gpio_value(RED_LED, 1);
+}
+
+void red_LED_off(void)
+{
+ at91_set_gpio_value(RED_LED, 0);
+}
+
+void green_LED_on(void)
+{
+ at91_set_gpio_value(GREEN_LED, 0);
+}
+
+void green_LED_off(void)
+{
+ at91_set_gpio_value(GREEN_LED, 1);
+}
+
+void yellow_LED_on(void)
+{
+ at91_set_gpio_value(YELLOW_LED, 0);
+}
+
+void yellow_LED_off(void)
+{
+ at91_set_gpio_value(YELLOW_LED, 1);
+}
+
+
+void coloured_LED_init(void)
+{
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOA);
+
+ at91_set_gpio_output(RED_LED, 1);
+ at91_set_gpio_output(GREEN_LED, 1);
+ at91_set_gpio_output(YELLOW_LED, 1);
+
+ at91_set_gpio_value(RED_LED, 0);
+ at91_set_gpio_value(GREEN_LED, 1);
+ at91_set_gpio_value(YELLOW_LED, 1);
+}
--- /dev/null
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9261.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91_pio.h>
+
+#include <nand.h>
+
+/*
+ * hardware specific access to control-lines
+ */
+#define MASK_ALE (1 << 22) /* our ALE is AD22 */
+#define MASK_CLE (1 << 21) /* our CLE is AD21 */
+
+static void at91sam9261ek_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+ struct nand_chip *this = mtd->priv;
+ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+
+ IO_ADDR_W &= ~(MASK_ALE|MASK_CLE);
+ switch (cmd) {
+ case NAND_CTL_SETCLE:
+ IO_ADDR_W |= MASK_CLE;
+ break;
+ case NAND_CTL_SETALE:
+ IO_ADDR_W |= MASK_ALE;
+ break;
+ case NAND_CTL_CLRNCE:
+ at91_set_gpio_value(AT91_PIN_PC14, 1);
+ break;
+ case NAND_CTL_SETNCE:
+ at91_set_gpio_value(AT91_PIN_PC14, 0);
+ break;
+ }
+ this->IO_ADDR_W = (void *) IO_ADDR_W;
+}
+
+static int at91sam9261ek_nand_ready(struct mtd_info *mtd)
+{
+ return at91_get_gpio_value(AT91_PIN_PC15);
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+ nand->eccmode = NAND_ECC_SOFT;
+#ifdef CFG_NAND_DBW_16
+ nand->options = NAND_BUSWIDTH_16;
+#endif
+ nand->hwcontrol = at91sam9261ek_nand_hwcontrol;
+ nand->dev_ready = at91sam9261ek_nand_ready;
+ nand->chip_delay = 20;
+
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2008
+ * Ulf Samuelsson <ulf@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <common.h>
+#include <config.h>
+#include <asm/hardware.h>
+#include <dataflash.h>
+
+AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+
+struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
+ {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+ {CFG_DATAFLASH_LOGIC_ADDR_CS3, 3}
+};
+
+/*define the area offsets*/
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
+ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
+ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
+ {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
+ {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
+};
--- /dev/null
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-y += at91sam9263ek.o
+COBJS-y += led.o
+COBJS-y += partition.o
+COBJS-$(CONFIG_CMD_NAND) += nand.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/sizes.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91sam9263_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
+#include <net.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+static void at91sam9263ek_serial_hw_init(void)
+{
+#ifdef CONFIG_USART0
+ at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+#endif
+
+#ifdef CONFIG_USART1
+ at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+#endif
+
+#ifdef CONFIG_USART2
+ at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+#endif
+
+#ifdef CONFIG_USART3 /* DBGU */
+ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+#endif
+}
+
+#ifdef CONFIG_CMD_NAND
+static void at91sam9263ek_nand_hw_init(void)
+{
+ unsigned long csa;
+
+ /* Enable CS3 */
+ csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+ at91_sys_write(AT91_MATRIX_EBI0CSA,
+ csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ at91_sys_write(AT91_SMC_SETUP(3),
+ AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(3),
+ AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
+ AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+ at91_sys_write(AT91_SMC_CYCLE(3),
+ AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+ at91_sys_write(AT91_SMC_MODE(3),
+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_DISABLE |
+#ifdef CFG_NAND_DBW_16
+ AT91_SMC_DBW_16 |
+#else /* CFG_NAND_DBW_8 */
+ AT91_SMC_DBW_8 |
+#endif
+ AT91_SMC_TDF_(2));
+
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOA |
+ 1 << AT91SAM9263_ID_PIOCDE);
+
+ /* Configure RDY/BSY */
+ at91_set_gpio_input(AT91_PIN_PA22, 1);
+
+ /* Enable NandFlash */
+ at91_set_gpio_output(AT91_PIN_PD15, 1);
+}
+#endif
+
+#ifdef CONFIG_HAS_DATAFLASH
+static void at91sam9263ek_spi_hw_init(void)
+{
+ at91_set_B_periph(AT91_PIN_PA5, 0); /* SPI0_NPCS0 */
+
+ at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
+
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_SPI0);
+}
+#endif
+
+#ifdef CONFIG_MACB
+static void at91sam9263ek_macb_hw_init(void)
+{
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_EMAC);
+
+ /*
+ * Disable pull-up on:
+ * RXDV (PC25) => PHY normal mode (not Test mode)
+ * ERX0 (PE25) => PHY ADDR0
+ * ERX1 (PE26) => PHY ADDR1 => PHYADDR = 0x0
+ *
+ * PHY has internal pull-down
+ */
+ writel(pin_to_mask(AT91_PIN_PC25),
+ pin_to_controller(AT91_PIN_PC0) + PIO_PUDR);
+ writel(pin_to_mask(AT91_PIN_PE25) |
+ pin_to_mask(AT91_PIN_PE26),
+ pin_to_controller(AT91_PIN_PE0) + PIO_PUDR);
+
+ /* Need to reset PHY -> 500ms reset */
+ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+ AT91_RSTC_ERSTL | (0x0D << 8) |
+ AT91_RSTC_URSTEN);
+
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
+
+ /* Wait for end hardware reset */
+ while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
+
+ /* Re-enable pull-up */
+ writel(pin_to_mask(AT91_PIN_PC25),
+ pin_to_controller(AT91_PIN_PC0) + PIO_PUER);
+ writel(pin_to_mask(AT91_PIN_PE25) |
+ pin_to_mask(AT91_PIN_PE26),
+ pin_to_controller(AT91_PIN_PE0) + PIO_PUER);
+
+ at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */
+ at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */
+
+#ifndef CONFIG_RMII
+ at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */
+ at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
+ at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
+ at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
+ at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
+ at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
+ at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
+#endif
+
+}
+#endif
+
+#ifdef CONFIG_USB_OHCI_NEW
+static void at91sam9263ek_uhp_hw_init(void)
+{
+ /* Enable VBus on UHP ports */
+ at91_set_gpio_output(AT91_PIN_PA21, 0);
+ at91_set_gpio_output(AT91_PIN_PA24, 0);
+}
+#endif
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+ vl_col: 240,
+ vl_row: 320,
+ vl_clk: 4965000,
+ vl_sync: ATMEL_LCDC_INVLINE_INVERTED |
+ ATMEL_LCDC_INVFRAME_INVERTED,
+ vl_bpix: 3,
+ vl_tft: 1,
+ vl_hsync_len: 5,
+ vl_left_margin: 1,
+ vl_right_margin:33,
+ vl_vsync_len: 1,
+ vl_upper_margin:1,
+ vl_lower_margin:0,
+ mmio: AT91SAM9263_LCDC_BASE,
+};
+
+void lcd_enable(void)
+{
+ at91_set_gpio_value(AT91_PIN_PA30, 1); /* power up */
+}
+
+void lcd_disable(void)
+{
+ at91_set_gpio_value(AT91_PIN_PA30, 0); /* power down */
+}
+
+static void at91sam9263ek_lcd_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
+ at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
+ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
+ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
+ at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
+ at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
+ at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
+ at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
+ at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
+ at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
+ at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
+ at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */
+ at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
+ at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
+ at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
+ at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
+ at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
+ at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */
+ at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
+ at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
+
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_LCDC);
+
+ gd->fb_base = AT91SAM9263_SRAM0_BASE;
+}
+#endif
+
+int board_init(void)
+{
+ /* Enable Ctrlc */
+ console_init_f();
+
+ /* arch number of AT91SAM9263EK-Board */
+ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9263EK;
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ at91sam9263ek_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+ at91sam9263ek_nand_hw_init();
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+ at91sam9263ek_spi_hw_init();
+#endif
+#ifdef CONFIG_MACB
+ at91sam9263ek_macb_hw_init();
+#endif
+#ifdef CONFIG_USB_OHCI_NEW
+ at91sam9263ek_uhp_hw_init();
+#endif
+#ifdef CONFIG_LCD
+ at91sam9263ek_lcd_hw_init();
+#endif
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+ return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+#ifdef CONFIG_MACB
+ /*
+ * Initialize ethernet HW addr prior to starting Linux,
+ * needed for nfsroot
+ */
+ eth_init(gd->bd);
+#endif
+}
+#endif
--- /dev/null
+TEXT_BASE = 0x23f00000
--- /dev/null
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+#define RED_LED AT91_PIN_PB7 /* this is the power led */
+#define GREEN_LED AT91_PIN_PB8 /* this is the user1 led */
+#define YELLOW_LED AT91_PIN_PC29 /* this is the user2 led */
+
+void red_LED_on(void)
+{
+ at91_set_gpio_value(RED_LED, 1);
+}
+
+void red_LED_off(void)
+{
+ at91_set_gpio_value(RED_LED, 0);
+}
+
+void green_LED_on(void)
+{
+ at91_set_gpio_value(GREEN_LED, 0);
+}
+
+void green_LED_off(void)
+{
+ at91_set_gpio_value(GREEN_LED, 1);
+}
+
+void yellow_LED_on(void)
+{
+ at91_set_gpio_value(YELLOW_LED, 0);
+}
+
+void yellow_LED_off(void)
+{
+ at91_set_gpio_value(YELLOW_LED, 1);
+}
+
+void coloured_LED_init(void)
+{
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOB |
+ 1 << AT91SAM9263_ID_PIOCDE);
+
+ at91_set_gpio_output(RED_LED, 1);
+ at91_set_gpio_output(GREEN_LED, 1);
+ at91_set_gpio_output(YELLOW_LED, 1);
+
+ at91_set_gpio_value(RED_LED, 0);
+ at91_set_gpio_value(GREEN_LED, 1);
+ at91_set_gpio_value(YELLOW_LED, 1);
+}
--- /dev/null
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91_pio.h>
+
+#include <nand.h>
+
+/*
+ * hardware specific access to control-lines
+ */
+#define MASK_ALE (1 << 21) /* our ALE is AD21 */
+#define MASK_CLE (1 << 22) /* our CLE is AD22 */
+
+static void at91sam9263ek_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+ struct nand_chip *this = mtd->priv;
+ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+
+ IO_ADDR_W &= ~(MASK_ALE|MASK_CLE);
+ switch (cmd) {
+ case NAND_CTL_SETCLE:
+ IO_ADDR_W |= MASK_CLE;
+ break;
+ case NAND_CTL_SETALE:
+ IO_ADDR_W |= MASK_ALE;
+ break;
+ case NAND_CTL_CLRNCE:
+ at91_set_gpio_value(AT91_PIN_PD15, 1);
+ break;
+ case NAND_CTL_SETNCE:
+ at91_set_gpio_value(AT91_PIN_PD15, 0);
+ break;
+ }
+ this->IO_ADDR_W = (void *) IO_ADDR_W;
+}
+
+static int at91sam9263ek_nand_ready(struct mtd_info *mtd)
+{
+ return at91_get_gpio_value(AT91_PIN_PA22);
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+ nand->eccmode = NAND_ECC_SOFT;
+#ifdef CFG_NAND_DBW_16
+ nand->options = NAND_BUSWIDTH_16;
+#endif
+ nand->hwcontrol = at91sam9263ek_nand_hwcontrol;
+ nand->dev_ready = at91sam9263ek_nand_ready;
+ nand->chip_delay = 20;
+
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2008
+ * Ulf Samuelsson <ulf@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <common.h>
+#include <config.h>
+#include <asm/hardware.h>
+#include <dataflash.h>
+
+AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+
+struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
+ {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+};
+
+/*define the area offsets*/
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
+ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
+ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
+ {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
+ {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
+};
--- /dev/null
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-y += at91sam9rlek.o
+COBJS-y += led.o
+COBJS-y += partition.o
+COBJS-$(CONFIG_CMD_NAND) += nand.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9rl.h>
+#include <asm/arch/at91sam9rl_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
+#include <net.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+static void at91sam9rlek_serial_hw_init(void)
+{
+#ifdef CONFIG_USART0
+ at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+#endif
+
+#ifdef CONFIG_USART1
+ at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+#endif
+
+#ifdef CONFIG_USART2
+ at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+#endif
+
+#ifdef CONFIG_USART3 /* DBGU */
+ at91_set_A_periph(AT91_PIN_PA21, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PA22, 1); /* DTXD */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+#endif
+}
+
+#ifdef CONFIG_CMD_NAND
+static void at91sam9rlek_nand_hw_init(void)
+{
+ unsigned long csa;
+
+ /* Enable CS3 */
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA,
+ csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ at91_sys_write(AT91_SMC_SETUP(3),
+ AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(3),
+ AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5) |
+ AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+ at91_sys_write(AT91_SMC_CYCLE(3),
+ AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+ at91_sys_write(AT91_SMC_MODE(3),
+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_DISABLE |
+#ifdef CFG_NAND_DBW_16
+ AT91_SMC_DBW_16 |
+#else /* CFG_NAND_DBW_8 */
+ AT91_SMC_DBW_8 |
+#endif
+ AT91_SMC_TDF_(1));
+
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_PIOD);
+
+ /* Configure RDY/BSY */
+ at91_set_gpio_input(AT91_PIN_PD17, 1);
+
+ /* Enable NandFlash */
+ at91_set_gpio_output(AT91_PIN_PB6, 1);
+
+ at91_set_A_periph(AT91_PIN_PB4, 0); /* NANDOE */
+ at91_set_A_periph(AT91_PIN_PB5, 0); /* NANDWE */
+}
+#endif
+
+#ifdef CONFIG_HAS_DATAFLASH
+static void at91sam9rlek_spi_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PA28, 0); /* SPI0_NPCS0 */
+
+ at91_set_A_periph(AT91_PIN_PA25, 0); /* SPI0_MISO */
+ at91_set_A_periph(AT91_PIN_PA26, 0); /* SPI0_MOSI */
+ at91_set_A_periph(AT91_PIN_PA27, 0); /* SPI0_SPCK */
+
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_SPI);
+}
+#endif
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+ vl_col: 240,
+ vl_row: 320,
+ vl_clk: 4965000,
+ vl_sync: ATMEL_LCDC_INVLINE_INVERTED |
+ ATMEL_LCDC_INVFRAME_INVERTED,
+ vl_bpix: 3,
+ vl_tft: 1,
+ vl_hsync_len: 5,
+ vl_left_margin: 1,
+ vl_right_margin:33,
+ vl_vsync_len: 1,
+ vl_upper_margin:1,
+ vl_lower_margin:0,
+ mmio: AT91SAM9RL_LCDC_BASE,
+};
+
+void lcd_enable(void)
+{
+ at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */
+}
+
+void lcd_disable(void)
+{
+ at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */
+}
+static void at91sam9rlek_lcd_hw_init(void)
+{
+ at91_set_B_periph(AT91_PIN_PC1, 0); /* LCDPWR */
+ at91_set_A_periph(AT91_PIN_PC5, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDDEN */
+ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDCC */
+ at91_set_B_periph(AT91_PIN_PC9, 0); /* LCDD3 */
+ at91_set_B_periph(AT91_PIN_PC10, 0); /* LCDD4 */
+ at91_set_B_periph(AT91_PIN_PC11, 0); /* LCDD5 */
+ at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD6 */
+ at91_set_B_periph(AT91_PIN_PC13, 0); /* LCDD7 */
+ at91_set_B_periph(AT91_PIN_PC15, 0); /* LCDD11 */
+ at91_set_B_periph(AT91_PIN_PC16, 0); /* LCDD12 */
+ at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD13 */
+ at91_set_B_periph(AT91_PIN_PC18, 0); /* LCDD14 */
+ at91_set_B_periph(AT91_PIN_PC19, 0); /* LCDD15 */
+ at91_set_B_periph(AT91_PIN_PC20, 0); /* LCDD18 */
+ at91_set_B_periph(AT91_PIN_PC21, 0); /* LCDD19 */
+ at91_set_B_periph(AT91_PIN_PC22, 0); /* LCDD20 */
+ at91_set_B_periph(AT91_PIN_PC23, 0); /* LCDD21 */
+ at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */
+ at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */
+
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_LCDC);
+
+ gd->fb_base = 0;
+}
+#endif
+
+
+int board_init(void)
+{
+ /* Enable Ctrlc */
+ console_init_f();
+
+ /* arch number of AT91SAM9RLEK-Board */
+ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9RLEK;
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ at91sam9rlek_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+ at91sam9rlek_nand_hw_init();
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+ at91sam9rlek_spi_hw_init();
+#endif
+#ifdef CONFIG_LCD
+ at91sam9rlek_lcd_hw_init();
+#endif
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+ return 0;
+}
--- /dev/null
+TEXT_BASE = 0x23f00000
--- /dev/null
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9rl.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+#define RED_LED AT91_PIN_PD14 /* this is the power led */
+#define GREEN_LED AT91_PIN_PD15 /* this is the user1 led */
+#define YELLOW_LED AT91_PIN_PD16 /* this is the user2 led */
+
+void red_LED_on(void)
+{
+ at91_set_gpio_value(RED_LED, 1);
+}
+
+void red_LED_off(void)
+{
+ at91_set_gpio_value(RED_LED, 0);
+}
+
+void green_LED_on(void)
+{
+ at91_set_gpio_value(GREEN_LED, 0);
+}
+
+void green_LED_off(void)
+{
+ at91_set_gpio_value(GREEN_LED, 1);
+}
+
+void yellow_LED_on(void)
+{
+ at91_set_gpio_value(YELLOW_LED, 0);
+}
+
+void yellow_LED_off(void)
+{
+ at91_set_gpio_value(YELLOW_LED, 1);
+}
+
+void coloured_LED_init(void)
+{
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_PIOD);
+
+ at91_set_gpio_output(RED_LED, 1);
+ at91_set_gpio_output(GREEN_LED, 1);
+ at91_set_gpio_output(YELLOW_LED, 1);
+
+ at91_set_gpio_value(RED_LED, 0);
+ at91_set_gpio_value(GREEN_LED, 1);
+ at91_set_gpio_value(YELLOW_LED, 1);
+}
--- /dev/null
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9rl.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91_pio.h>
+
+#include <nand.h>
+
+/*
+ * hardware specific access to control-lines
+ */
+#define MASK_ALE (1 << 21) /* our ALE is AD21 */
+#define MASK_CLE (1 << 22) /* our CLE is AD22 */
+
+static void at91sam9rlek_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+ struct nand_chip *this = mtd->priv;
+ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+
+ IO_ADDR_W &= ~(MASK_ALE|MASK_CLE);
+ switch (cmd) {
+ case NAND_CTL_SETCLE:
+ IO_ADDR_W |= MASK_CLE;
+ break;
+ case NAND_CTL_SETALE:
+ IO_ADDR_W |= MASK_ALE;
+ break;
+ case NAND_CTL_CLRNCE:
+ at91_set_gpio_value(AT91_PIN_PB6, 1);
+ break;
+ case NAND_CTL_SETNCE:
+ at91_set_gpio_value(AT91_PIN_PB6, 0);
+ break;
+ }
+ this->IO_ADDR_W = (void *) IO_ADDR_W;
+}
+
+static int at91sam9rlek_nand_ready(struct mtd_info *mtd)
+{
+ return at91_get_gpio_value(AT91_PIN_PD17);
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+ nand->eccmode = NAND_ECC_SOFT;
+#ifdef CFG_NAND_DBW_16
+ nand->options = NAND_BUSWIDTH_16;
+#endif
+ nand->hwcontrol = at91sam9rlek_nand_hwcontrol;
+ nand->dev_ready = at91sam9rlek_nand_ready;
+ nand->chip_delay = 20;
+
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2008
+ * Ulf Samuelsson <ulf@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <common.h>
+#include <config.h>
+#include <asm/hardware.h>
+#include <dataflash.h>
+
+AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+
+struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
+ {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+};
+
+/*define the area offsets*/
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
+ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
+ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
+ {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
+ {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
+};
#include <asm/sdram.h>
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/hmatrix2.h>
+#include <asm/arch/hmatrix.h>
DECLARE_GLOBAL_DATA_PTR;
-static const struct sdram_info sdram = {
- .phys_addr = CFG_SDRAM_BASE,
+static const struct sdram_config sdram_config = {
+ .data_bits = SDRAM_DATA_16BIT,
.row_bits = 13,
.col_bits = 9,
.bank_bits = 2,
int board_early_init_f(void)
{
- /* Set the SDRAM_ENABLE bit in the HEBI SFR */
- hmatrix2_writel(SFR4, 1 << 1);
+ /* Enable SDRAM in the EBI mux */
+ hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
gpio_enable_ebi();
gpio_enable_usart1();
long int initdram(int board_type)
{
- return sdram_init(&sdram);
+ unsigned long expected_size;
+ unsigned long actual_size;
+ void *sdram_base;
+
+ sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE);
+
+ expected_size = sdram_init(sdram_base, &sdram_config);
+ actual_size = get_ram_size(sdram_base, expected_size);
+
+ unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
+
+ if (expected_size != actual_size)
+ printf("Warning: Only %u of %u MiB SDRAM is working\n",
+ actual_size >> 20, expected_size >> 20);
+
+ return actual_size;
}
void board_init_info(void)
. = 0;
_text = .;
.text : {
+ *(.exception.text)
*(.text)
*(.text.*)
}
-
- . = ALIGN(32);
- __flashprog_start = .;
- .flashprog : {
- *(.flashprog)
- }
- . = ALIGN(32);
- __flashprog_end = .;
_etext = .;
.rodata : {
#include <asm/sdram.h>
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/hmatrix2.h>
+#include <asm/arch/hmatrix.h>
DECLARE_GLOBAL_DATA_PTR;
-static const struct sdram_info sdram = {
- .phys_addr = CFG_SDRAM_BASE,
+static const struct sdram_config sdram_config = {
+#if defined(CONFIG_ATSTK1006)
+ /* Dual MT48LC16M16A2-7E (64 MB) on daughterboard */
+ .data_bits = SDRAM_DATA_32BIT,
+ .row_bits = 13,
+ .col_bits = 9,
+ .bank_bits = 2,
+ .cas = 2,
+ .twr = 2,
+ .trc = 7,
+ .trp = 2,
+ .trcd = 2,
+ .tras = 4,
+ .txsr = 7,
+ /* 7.81 us */
+ .refresh_period = (781 * (SDRAMC_BUS_HZ / 1000)) / 100000,
+#else
+ /* MT48LC2M32B2P-5 (8 MB) on motherboard */
+#ifdef CONFIG_ATSTK1004
+ .data_bits = SDRAM_DATA_16BIT,
+#else
+ .data_bits = SDRAM_DATA_32BIT,
+#endif
+#ifdef CONFIG_ATSTK1000_16MB_SDRAM
+ /* MT48LC4M32B2P-6 (16 MB) on mod'ed motherboard */
+ .row_bits = 12,
+#else
.row_bits = 11,
+#endif
.col_bits = 8,
.bank_bits = 2,
.cas = 3,
.txsr = 5,
/* 15.6 us */
.refresh_period = (156 * (SDRAMC_BUS_HZ / 1000)) / 10000,
+#endif
};
int board_early_init_f(void)
{
- /* Set the SDRAM_ENABLE bit in the HEBI SFR */
- hmatrix2_writel(SFR4, 1 << 1);
+ /* Enable SDRAM in the EBI mux */
+ hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
gpio_enable_ebi();
gpio_enable_usart1();
long int initdram(int board_type)
{
- return sdram_init(&sdram);
+ unsigned long expected_size;
+ unsigned long actual_size;
+ void *sdram_base;
+
+ sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE);
+
+ expected_size = sdram_init(sdram_base, &sdram_config);
+ actual_size = get_ram_size(sdram_base, expected_size);
+
+ unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
+
+ if (expected_size != actual_size)
+ printf("Warning: Only %u of %u MiB SDRAM is working\n",
+ actual_size >> 20, expected_size >> 20);
+
+ return actual_size;
}
void board_init_info(void)
flash_info_t flash_info[1];
-static void __flashprog flash_identify(uint16_t *flash, flash_info_t *info)
+static void flash_identify(uint16_t *flash, flash_info_t *info)
{
unsigned long flags;
info->size >> 10, info->sector_count);
}
-int __flashprog flash_erase(flash_info_t *info, int s_first, int s_last)
+int flash_erase(flash_info_t *info, int s_first, int s_last)
{
unsigned long flags;
unsigned long start_time;
return ERR_OK;
}
-int __flashprog write_buff(flash_info_t *info, uchar *src,
+int write_buff(flash_info_t *info, uchar *src,
ulong addr, ulong count)
{
unsigned long flags;
. = 0;
_text = .;
.text : {
+ *(.exception.text)
*(.text)
*(.text.*)
}
-
- . = ALIGN(32);
- __flashprog_start = .;
- .flashprog : {
- *(.flashprog)
- }
- . = ALIGN(32);
- __flashprog_end = .;
_etext = .;
.rodata : {
*/
struct law_entry law_table[] = {
- SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
- SET_LAW_ENTRY(3, CFG_PCI1_IO_PHYS, LAWAR_SIZE_1M, LAW_TRGT_IF_PCI_1),
- SET_LAW_ENTRY(4, CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
- SET_LAW_ENTRY(5, CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
- SET_LAW_ENTRY(6, CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
- SET_LAW_ENTRY(7, CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
+ SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+ SET_LAW(CFG_PCI1_IO_PHYS, LAWAR_SIZE_1M, LAW_TRGT_IF_PCI_1),
+ SET_LAW(CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+ SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
+ SET_LAW(CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
+ SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
- SET_LAW_ENTRY(8, CFG_LBC_CACHE_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_LBC_CACHE_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
};
int num_law_entries = ARRAY_SIZE(law_table);
*sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */
- proc_id = read_32bit_cp0_register(CP0_PRID);
+ proc_id = read_c0_prid();
switch (proc_id >> 24) {
case 0:
#define SPI_CS_MASK 0x80000000
-void spi_eeprom_chipsel(int cs)
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return bus == 0 && cs == 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
{
volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0];
- if (cs)
- iopd->dat &= ~SPI_CS_MASK;
- else
- iopd->dat |= SPI_CS_MASK;
+ iopd->dat &= ~SPI_CS_MASK;
}
-/*
- * The SPI command uses this table of functions for controlling the SPI
- * chip selects.
- */
-spi_chipsel_type spi_chipsel[] = {
- spi_eeprom_chipsel,
-};
-int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0];
+ iopd->dat |= SPI_CS_MASK;
+}
#endif /* CONFIG_HARD_SPI */
#if defined(CONFIG_OF_BOARD_SETUP)
struct law_entry law_table[] = {
#ifndef CONFIG_SPD_EEPROM
- SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
+ SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
#endif
- SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
/* This is not so much the SDRAM map as it is the whole localbus map. */
- SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
- SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
- SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+ SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
};
int num_law_entries = ARRAY_SIZE(law_table);
void sdram_init(void);
long int fixed_sdram(void);
-
-int board_early_init_f (void)
-{
- return 0;
-}
-
int checkboard (void)
{
puts("Board: ADS\n");
udelay(100);
}
-
-#if defined(CFG_DRAM_TEST)
-int testdram (void)
-{
- uint *pstart = (uint *) CFG_MEMTEST_START;
- uint *pend = (uint *) CFG_MEMTEST_END;
- uint *p;
-
- printf("SDRAM test phase 1:\n");
- for (p = pstart; p < pend; p++)
- *p = 0xaaaaaaaa;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0xaaaaaaaa) {
- printf ("SDRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf("SDRAM test phase 2:\n");
- for (p = pstart; p < pend; p++)
- *p = 0x55555555;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0x55555555) {
- printf ("SDRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf("SDRAM test passed.\n");
- return 0;
-}
-#endif
-
-
#if !defined(CONFIG_SPD_EEPROM)
/*************************************************************************
* fixed sdram init -- doesn't use serial presence detect.
*/
struct law_entry law_table[] = {
- SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
- SET_LAW_ENTRY(3, CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
- SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
- SET_LAW_ENTRY(5, CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
+ SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+ SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
- SET_LAW_ENTRY(6, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
};
int num_law_entries = ARRAY_SIZE(law_table);
}
};
-int board_early_init_f (void)
-{
- return 0;
-}
-
int checkboard (void)
{
volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
#endif /* enable SDRAM init */
}
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
- uint *pstart = (uint *) CFG_MEMTEST_START;
- uint *pend = (uint *) CFG_MEMTEST_END;
- uint *p;
-
- printf("Testing DRAM from 0x%08x to 0x%08x\n",
- CFG_MEMTEST_START,
- CFG_MEMTEST_END);
-
- printf("DRAM test phase 1:\n");
- for (p = pstart; p < pend; p++)
- *p = 0xaaaaaaaa;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0xaaaaaaaa) {
- printf ("DRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf("DRAM test phase 2:\n");
- for (p = pstart; p < pend; p++)
- *p = 0x55555555;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0x55555555) {
- printf ("DRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf("DRAM test passed.\n");
- return 0;
-}
-#endif
-
#if defined(CONFIG_PCI)
/* For some reason the Tundra PCI bridge shows up on itself as a
* different device. Work around that by refusing to configure it.
#include <asm/mmu.h>
struct law_entry law_table[] = {
- SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
- SET_LAW_ENTRY(3, CFG_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI),
- SET_LAW_ENTRY(4, CFG_LBC_CACHE_BASE, LAWAR_SIZE_256M, LAW_TRGT_IF_LBC),
- SET_LAW_ENTRY(5, CFG_PCIE1_MEM_PHYS, LAWAR_SIZE_256M, LAW_TRGT_IF_PCIE_1),
- SET_LAW_ENTRY(6, CFG_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
- SET_LAW_ENTRY(7, CFG_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2),
- SET_LAW_ENTRY(8, CFG_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
+ SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_LBC_CACHE_BASE, LAWAR_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_PCIE1_MEM_PHYS, LAWAR_SIZE_256M, LAW_TRGT_IF_PCIE_1),
+ SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
+ SET_LAW(CFG_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2),
+ SET_LAW(CFG_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
/* contains both PCIE3 MEM & IO space */
- SET_LAW_ENTRY(9, CFG_PCIE3_MEM_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_PCIE_3),
+ SET_LAW(CFG_PCIE3_MEM_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_PCIE_3),
};
int num_law_entries = ARRAY_SIZE(law_table);
void sdram_init(void);
-int board_early_init_f (void)
-{
- return 0;
-}
-
int checkboard (void)
{
volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
return dram_size;
}
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
- uint *pstart = (uint *) CFG_MEMTEST_START;
- uint *pend = (uint *) CFG_MEMTEST_END;
- uint *p;
-
- printf("Testing DRAM from 0x%08x to 0x%08x\n",
- CFG_MEMTEST_START,
- CFG_MEMTEST_END);
-
- printf("DRAM test phase 1:\n");
- for (p = pstart; p < pend; p++)
- *p = 0xaaaaaaaa;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0xaaaaaaaa) {
- printf ("DRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf("DRAM test phase 2:\n");
- for (p = pstart; p < pend; p++)
- *p = 0x55555555;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0x55555555) {
- printf ("DRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf("DRAM test passed.\n");
- return 0;
-}
-#endif
-
#ifdef CONFIG_PCI1
static struct pci_controller pci1_hose;
#endif
struct law_entry law_table[] = {
#ifdef CFG_PCI1_MEM_PHYS
- SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
- SET_LAW_ENTRY(3, CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
#endif
#ifdef CFG_PCI2_MEM_PHYS
- SET_LAW_ENTRY(4, CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
- SET_LAW_ENTRY(5, CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
+ SET_LAW(CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+ SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
#endif
#ifdef CFG_PCIE1_MEM_PHYS
- SET_LAW_ENTRY(6, CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
- SET_LAW_ENTRY(7, CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
+ SET_LAW(CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
+ SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
#endif
/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
- SET_LAW_ENTRY(8, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
#ifdef CFG_RIO_MEM_PHYS
- SET_LAW_ENTRY(9, CFG_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
+ SET_LAW(CFG_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
#endif
};
void local_bus_init(void);
void sdram_init(void);
-int board_early_init_f (void)
-{
- return 0;
-}
-
int checkboard (void)
{
volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
#endif /* enable SDRAM init */
}
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
- uint *pstart = (uint *) CFG_MEMTEST_START;
- uint *pend = (uint *) CFG_MEMTEST_END;
- uint *p;
-
- printf("Testing DRAM from 0x%08x to 0x%08x\n",
- CFG_MEMTEST_START,
- CFG_MEMTEST_END);
-
- printf("DRAM test phase 1:\n");
- for (p = pstart; p < pend; p++)
- *p = 0xaaaaaaaa;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0xaaaaaaaa) {
- printf ("DRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf("DRAM test phase 2:\n");
- for (p = pstart; p < pend; p++)
- *p = 0x55555555;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0x55555555) {
- printf ("DRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf("DRAM test passed.\n");
- return 0;
-}
-#endif
-
#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
/* For some reason the Tundra PCI bridge shows up on itself as a
* different device. Work around that by refusing to configure it.
*/
struct law_entry law_table[] = {
- SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
- SET_LAW_ENTRY(3, CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
- SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
- SET_LAW_ENTRY(5, CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
+ SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+ SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
- SET_LAW_ENTRY(6, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
};
int num_law_entries = ARRAY_SIZE(law_table);
}
};
-int board_early_init_f (void)
-{
- return 0;
-}
-
int checkboard (void)
{
volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
#endif /* enable SDRAM init */
}
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
- uint *pstart = (uint *) CFG_MEMTEST_START;
- uint *pend = (uint *) CFG_MEMTEST_END;
- uint *p;
-
- printf("Testing DRAM from 0x%08x to 0x%08x\n",
- CFG_MEMTEST_START,
- CFG_MEMTEST_END);
-
- printf("DRAM test phase 1:\n");
- for (p = pstart; p < pend; p++)
- *p = 0xaaaaaaaa;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0xaaaaaaaa) {
- printf ("DRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf("DRAM test phase 2:\n");
- for (p = pstart; p < pend; p++)
- *p = 0x55555555;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0x55555555) {
- printf ("DRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf("DRAM test passed.\n");
- return 0;
-}
-#endif
-
#ifdef CONFIG_PCI
/* For some reason the Tundra PCI bridge shows up on itself as a
* different device. Work around that by refusing to configure it
struct law_entry law_table[] = {
#ifndef CONFIG_SPD_EEPROM
- SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
+ SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
#endif
- SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
/* This is not so much the SDRAM map as it is the whole localbus map. */
- SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
- SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
- SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+ SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
};
int num_law_entries = ARRAY_SIZE(law_table);
volatile unsigned char bcsr5;
} bcsr_t;
-
-int board_early_init_f (void)
-{
- return 0;
-}
-
void reset_phy (void)
{
#if defined(CONFIG_ETHER_ON_FCC) /* avoid compile warnings for now */
udelay(100);
}
-
-#if defined(CFG_DRAM_TEST)
-int testdram (void)
-{
- uint *pstart = (uint *) CFG_MEMTEST_START;
- uint *pend = (uint *) CFG_MEMTEST_END;
- uint *p;
-
- printf("SDRAM test phase 1:\n");
- for (p = pstart; p < pend; p++)
- *p = 0xaaaaaaaa;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0xaaaaaaaa) {
- printf ("SDRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf("SDRAM test phase 2:\n");
- for (p = pstart; p < pend; p++)
- *p = 0x55555555;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0x55555555) {
- printf ("SDRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf("SDRAM test passed.\n");
- return 0;
-}
-#endif
-
-
#if !defined(CONFIG_SPD_EEPROM)
/*************************************************************************
* fixed sdram init -- doesn't use serial presence detect.
*/
struct law_entry law_table[] = {
- SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
- SET_LAW_ENTRY(3, CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
- SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI),
- SET_LAW_ENTRY(5, CFG_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1),
- SET_LAW_ENTRY(6, CFG_SRIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
+ SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
+ SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1),
+ SET_LAW(CFG_SRIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
/* LBC window - maps 256M. That's SDRAM, BCSR, PIBs, and Flash */
- SET_LAW_ENTRY(7, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
};
int num_law_entries = ARRAY_SIZE(law_table);
#endif /* enable SDRAM init */
}
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
- uint *pstart = (uint *) CFG_MEMTEST_START;
- uint *pend = (uint *) CFG_MEMTEST_END;
- uint *p;
-
- printf("Testing DRAM from 0x%08x to 0x%08x\n",
- CFG_MEMTEST_START,
- CFG_MEMTEST_END);
-
- printf("DRAM test phase 1:\n");
- for (p = pstart; p < pend; p++)
- *p = 0xaaaaaaaa;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0xaaaaaaaa) {
- printf ("DRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf("DRAM test phase 2:\n");
- for (p = pstart; p < pend; p++)
- *p = 0x55555555;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0x55555555) {
- printf ("DRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf("DRAM test passed.\n");
- return 0;
-}
-#endif
-
#if defined(CONFIG_PCI)
#ifndef CONFIG_PCI_PNP
static struct pci_config_table pci_mpc8568mds_config_table[] = {
struct law_entry law_table[] = {
#if !defined(CONFIG_SPD_EEPROM)
- SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR_1),
+ SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR_1),
#endif
- SET_LAW_ENTRY(2, CFG_PCIE1_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_1),
- SET_LAW_ENTRY(3, CFG_PCIE2_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2),
- SET_LAW_ENTRY(4, PIXIS_BASE, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
- SET_LAW_ENTRY(5, CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
- SET_LAW_ENTRY(6, CFG_PCIE2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_2),
- SET_LAW_ENTRY(7, CFG_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
- SET_LAW_ENTRY(8, CFG_PCI1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI_1),
- SET_LAW_ENTRY(9, CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_1)
+ SET_LAW(CFG_PCIE1_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_1),
+ SET_LAW(CFG_PCIE2_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2),
+ SET_LAW(PIXIS_BASE, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
+ SET_LAW(CFG_PCIE2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_2),
+ SET_LAW(CFG_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI_1),
+ SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_1)
};
int num_law_entries = ARRAY_SIZE(law_table);
}
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
- uint *pstart = (uint *) CFG_MEMTEST_START;
- uint *pend = (uint *) CFG_MEMTEST_END;
- uint *p;
-
- puts("SDRAM test phase 1:\n");
- for (p = pstart; p < pend; p++)
- *p = 0xaaaaaaaa;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0xaaaaaaaa) {
- printf("SDRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- puts("SDRAM test phase 2:\n");
- for (p = pstart; p < pend; p++)
- *p = 0x55555555;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0x55555555) {
- printf("SDRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- puts("SDRAM test passed.\n");
- return 0;
-}
-#endif
-
-
#if !defined(CONFIG_SPD_EEPROM)
/*
* Fixed sdram init -- doesn't use serial presence detect.
struct law_entry law_table[] = {
#if !defined(CONFIG_SPD_EEPROM)
- SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
+ SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
#endif
- SET_LAW_ENTRY(2, CFG_PCI1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
- SET_LAW_ENTRY(3, CFG_PCI2_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
- SET_LAW_ENTRY(4, PIXIS_BASE, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
- SET_LAW_ENTRY(5, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
- SET_LAW_ENTRY(6, CFG_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
- SET_LAW_ENTRY(7, (CFG_FLASH_BASE & 0xfe000000), LAW_SIZE_32M, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_PCI1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+ SET_LAW(CFG_PCI2_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+ SET_LAW(PIXIS_BASE, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
+ SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
+ SET_LAW((CFG_FLASH_BASE & 0xfe000000), LAW_SIZE_32M, LAW_TRGT_IF_LBC),
#if !defined(CONFIG_SPD_EEPROM)
- SET_LAW_ENTRY(8, CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
+ SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
#endif
- SET_LAW_ENTRY(9, CFG_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
+ SET_LAW(CFG_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
};
int num_law_entries = ARRAY_SIZE(law_table);
}
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
- uint *pstart = (uint *) CFG_MEMTEST_START;
- uint *pend = (uint *) CFG_MEMTEST_END;
- uint *p;
-
- puts("SDRAM test phase 1:\n");
- for (p = pstart; p < pend; p++)
- *p = 0xaaaaaaaa;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0xaaaaaaaa) {
- printf("SDRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- puts("SDRAM test phase 2:\n");
- for (p = pstart; p < pend; p++)
- *p = 0x55555555;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0x55555555) {
- printf("SDRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- puts("SDRAM test passed.\n");
- return 0;
-}
-#endif
-
-
#if !defined(CONFIG_SPD_EEPROM)
/*
* Fixed sdram init -- doesn't use serial presence detect.
*sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */
- proc_id = read_32bit_cp0_register(CP0_PRID);
+ proc_id = read_c0_prid();
switch (proc_id >> 24) {
case 0:
struct law_entry law_table[] = {
#ifndef CONFIG_SPD_EEPROM
- SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
+ SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
#endif
- SET_LAW_ENTRY(2, CFG_PCI_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_PCI_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
#ifndef CONFIG_RAM_AS_FLASH
- SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
#endif
};
--- /dev/null
+#
+# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o pci.o fpga.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+TEXT_BASE = 0xFFF00000
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
+ * Keith Outwater, keith_outwater@mvis.com.
+ *
+ * (C) Copyright 2008
+ * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <ACEX1K.h>
+#include <command.h>
+#include "fpga.h"
+#include "mvblm7.h"
+
+#ifdef FPGA_DEBUG
+#define fpga_debug(fmt, args...) printf("%s: "fmt, __func__, ##args)
+#else
+#define fpga_debug(fmt, args...)
+#endif
+
+Altera_CYC2_Passive_Serial_fns altera_fns = {
+ fpga_null_fn,
+ fpga_config_fn,
+ fpga_status_fn,
+ fpga_done_fn,
+ fpga_wr_fn,
+ fpga_null_fn,
+ fpga_null_fn,
+ 0
+};
+
+Altera_desc cyclone2 = {
+ Altera_CYC2,
+ passive_serial,
+ Altera_EP2C20_SIZE,
+ (void *) &altera_fns,
+ NULL,
+ 0
+};
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int mvblm7_init_fpga(void)
+{
+ fpga_debug("Initialize FPGA interface (reloc 0x%.8lx)\n",
+ gd->reloc_off);
+ fpga_init(gd->reloc_off);
+ fpga_add(fpga_altera, &cyclone2);
+ fpga_config_fn(0, 1, 0);
+ udelay(60);
+
+ return 1;
+}
+
+int fpga_null_fn(int cookie)
+{
+ return 0;
+}
+
+int fpga_config_fn(int assert, int flush, int cookie)
+{
+ volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
+ volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0];
+ u32 dvo = gpio->dat;
+
+ fpga_debug("SET config : %s\n", assert ? "low" : "high");
+ if (assert)
+ dvo |= FPGA_CONFIG;
+ else
+ dvo &= ~FPGA_CONFIG;
+
+ if (flush)
+ gpio->dat = dvo;
+
+ return assert;
+}
+
+int fpga_done_fn(int cookie)
+{
+ volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
+ volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0];
+ int result = 0;
+
+ udelay(10);
+ fpga_debug("CONF_DONE check ... ");
+ if (gpio->dat & FPGA_CONF_DONE) {
+ fpga_debug("high\n");
+ result = 1;
+ } else
+ fpga_debug("low\n");
+
+ return result;
+}
+
+int fpga_status_fn(int cookie)
+{
+ volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
+ volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0];
+ int result = 0;
+
+ fpga_debug("STATUS check ... ");
+ if (gpio->dat & FPGA_STATUS) {
+ fpga_debug("high\n");
+ result = 1;
+ } else
+ fpga_debug("low\n");
+
+ return result;
+}
+
+int fpga_clk_fn(int assert_clk, int flush, int cookie)
+{
+ volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
+ volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0];
+ u32 dvo = gpio->dat;
+
+ fpga_debug("CLOCK %s\n", assert_clk ? "high" : "low");
+ if (assert_clk)
+ dvo |= FPGA_CCLK;
+ else
+ dvo &= ~FPGA_CCLK;
+
+ if (flush)
+ gpio->dat = dvo;
+
+ return assert_clk;
+}
+
+static inline int _write_fpga(u8 val, int dump)
+{
+ volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
+ volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0];
+ int i;
+ u32 dvo = gpio->dat;
+
+ if (dump)
+ fpga_debug(" %02x -> ", val);
+ for (i = 0; i < 8; i++) {
+ dvo &= ~FPGA_CCLK;
+ gpio->dat = dvo;
+ dvo &= ~FPGA_DIN;
+ if (dump)
+ fpga_debug("%d ", val&1);
+ if (val & 1)
+ dvo |= FPGA_DIN;
+ gpio->dat = dvo;
+ dvo |= FPGA_CCLK;
+ gpio->dat = dvo;
+ val >>= 1;
+ }
+ if (dump)
+ fpga_debug("\n");
+
+ return 0;
+}
+
+int fpga_wr_fn(void *buf, size_t len, int flush, int cookie)
+{
+ unsigned char *data = (unsigned char *) buf;
+ int i;
+
+ fpga_debug("fpga_wr: buf %p / size %d\n", buf, len);
+ for (i = 0; i < len; i++)
+ _write_fpga(data[i], 0);
+ fpga_debug("\n");
+
+ return FPGA_SUCCESS;
+}
/*
- * Copyright (C) 2006 Atmel Corporation
+ * (C) Copyright 2002
+ * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
+ * Keith Outwater, keith_outwater@mvis.com.
*
* See file CREDITS for list of people who contributed to this
* project.
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
+ *
*/
-#include <common.h>
-
-#ifdef CFG_POWER_MANAGER
-#include <asm/errno.h>
-#include <asm/io.h>
-
-#include <asm/arch/memory-map.h>
-
-#include "sm.h"
-
-
-#ifdef CONFIG_PLL
-#define MAIN_CLK_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL)
-#else
-#define MAIN_CLK_RATE (CFG_OSC0_HZ)
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
+extern int mvblm7_init_fpga(void);
-#endif /* CFG_POWER_MANAGER */
+extern int fpga_pgm_fn(int assert_pgm, int flush, int cookie);
+extern int fpga_status_fn(int cookie);
+extern int fpga_config_fn(int assert, int flush, int cookie);
+extern int fpga_done_fn(int cookie);
+extern int fpga_clk_fn(int assert_clk, int flush, int cookie);
+extern int fpga_wr_fn(void *buf, size_t len, int flush, int cookie);
+extern int fpga_null_fn(int cookie);
--- /dev/null
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+ *
+ * (C) Copyright 2008
+ * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc83xx.h>
+#include <asm/mpc8349_pci.h>
+#include <pci.h>
+#include <spi.h>
+#include <asm/mmu.h>
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#endif
+
+#include "mvblm7.h"
+
+int fixed_sdram(void)
+{
+ volatile immap_t *im = (immap_t *)CFG_IMMR;
+ u32 msize = 0;
+ u32 ddr_size;
+ u32 ddr_size_log2;
+
+ msize = CFG_DDR_SIZE;
+ for (ddr_size = msize << 20, ddr_size_log2 = 0;
+ (ddr_size > 1);
+ ddr_size = ddr_size >> 1, ddr_size_log2++) {
+ if (ddr_size & 1)
+ return -1;
+ }
+ im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff);
+ im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) &
+ LAWAR_SIZE);
+
+ im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
+ im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
+ im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
+ im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
+ im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
+ im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
+ im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
+ im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
+ im->ddr.sdram_mode = CFG_DDR_MODE;
+ im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+ im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
+
+ udelay(300);
+
+ im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
+
+ return CFG_DDR_SIZE;
+}
+
+long int initdram(int board_type)
+{
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ u32 msize = 0;
+
+ if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
+ return -1;
+
+ im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+ msize = fixed_sdram();
+
+ /* return total bus RAM size(bytes) */
+ return msize * 1024 * 1024;
+}
+
+int checkboard(void)
+{
+ puts("Board: Matrix Vision mvBlueLYNX-M7 " MV_VERSION "\n");
+
+ return 0;
+}
+
+u8 *dhcp_vendorex_prep(u8 *e)
+{
+ char *ptr;
+
+ /* DHCP vendor-class-identifier = 60 */
+ ptr = getenv("dhcp_vendor-class-identifier");
+ if (ptr) {
+ *e++ = 60;
+ *e++ = strlen(ptr);
+ while (*ptr)
+ *e++ = *ptr++;
+ }
+ /* DHCP_CLIENT_IDENTIFIER = 61 */
+ ptr = getenv("dhcp_client_id");
+ if (ptr) {
+ *e++ = 61;
+ *e++ = strlen(ptr);
+ while (*ptr)
+ *e++ = *ptr++;
+ }
+
+ return e;
+}
+
+u8 *dhcp_vendorex_proc(u8 *popt)
+{
+ return NULL;
+}
+
+#ifdef CONFIG_HARD_SPI
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return bus == 0 && cs == 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0];
+
+ iopd->dat &= ~MVBLM7_MMC_CS;
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0];
+
+ iopd->dat |= ~MVBLM7_MMC_CS;
+}
+#endif
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+#ifdef CONFIG_PCI
+ ft_pci_setup(blob, bd);
+#endif
+}
+
+#endif
--- /dev/null
+#ifndef __MVBC_H__
+#define __MVBC_H__
+
+#define MV_GPIO
+
+#define FPGA_CONFIG 0x80000000
+#define FPGA_CCLK 0x40000000
+#define FPGA_DIN 0x20000000
+#define FPGA_STATUS 0x10000000
+#define FPGA_CONF_DONE 0x08000000
+#define MMC_CS 0x04000000
+
+#define WD_WDI 0x00400000
+#define WD_TS 0x00200000
+#define MAN_RST 0x00100000
+
+#define MV_GPIO_DAT (WD_TS)
+#define MV_GPIO_OUT (FPGA_CONFIG|FPGA_DIN|FPGA_CCLK|WD_TS|WD_WDI|MMC_CS)
+#define MV_GPIO_ODE (FPGA_CONFIG|MAN_RST)
+
+#endif
--- /dev/null
+echo
+echo "==== running autoscript ===="
+echo
+setenv bootdtb bootm \${kernel_boot} \${mv_initrd_addr_ram} \${mv_dtb_addr_ram}
+setenv ramkernel setenv kernel_boot \${loadaddr}
+setenv flashkernel setenv kernel_boot \${mv_kernel_addr}
+setenv cpird cp \${mv_initrd_addr} \${mv_initrd_addr_ram} \${mv_initrd_length}
+setenv bootfromflash run flashkernel cpird ramparam bootdtb
+setenv getdtb tftp \${mv_dtb_addr_ram} \${dtb_name}
+setenv cpdtb cp \${mv_dtb_addr} \${mv_dtb_addr_ram} 0x2000
+setenv rundtb fdt addr \${mv_dtb_addr_ram}\;fdt boardsetup
+setenv bootfromnet tftp \${mv_initrd_addr_ram} \${initrd_name}\;run ramkernel
+setenv set_static_ip setenv ipaddr \${static_ipaddr}
+setenv set_static_nm setenv netmask \${static_netmask}
+setenv set_static_gw setenv gatewayip \${static_gateway}
+setenv set_ip setenv ip \${ipaddr}::\${gatewayip}:\${netmask}
+setenv ramparam setenv bootargs root=/dev/ram0 ro rootfstype=squashfs
+if test ${autoscr_boot} != no;
+then
+ if test ${netboot} = yes;
+ then
+ bootp
+ if test $? = 0;
+ then
+ echo "=== bootp succeeded -> netboot ==="
+ run set_ip
+ run getdtb rundtb bootfromnet ramparam bootdtb
+ else
+ echo "=== netboot failed ==="
+ fi
+ fi
+ run set_static_ip set_static_nm set_static_gw set_ip
+ echo "=== bootfromflash ==="
+ run cpdtb rundtb bootfromflash
+else
+ echo "=== boot stopped with autoscr_boot no ==="
+fi
--- /dev/null
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+ *
+ * (C) Copyright 2008
+ * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#endif
+#include <pci.h>
+#include <mpc83xx.h>
+#include <fpga.h>
+#include "mvblm7.h"
+#include "fpga.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int mvblm7_load_fpga(void)
+{
+ size_t data_size = 0;
+ void *fpga_data = NULL;
+ char *datastr = getenv("fpgadata");
+ char *sizestr = getenv("fpgadatasize");
+
+ if (datastr)
+ fpga_data = (void *)simple_strtoul(datastr, NULL, 16);
+ if (sizestr)
+ data_size = (size_t)simple_strtoul(sizestr, NULL, 16);
+
+ return fpga_load(0, fpga_data, data_size);
+}
+
+static struct pci_region pci_regions[] = {
+ {
+ bus_start: CFG_PCI1_MEM_BASE,
+ phys_start: CFG_PCI1_MEM_PHYS,
+ size: CFG_PCI1_MEM_SIZE,
+ flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
+ },
+ {
+ bus_start: CFG_PCI1_MMIO_BASE,
+ phys_start: CFG_PCI1_MMIO_PHYS,
+ size: CFG_PCI1_MMIO_SIZE,
+ flags: PCI_REGION_MEM
+ },
+ {
+ bus_start: CFG_PCI1_IO_BASE,
+ phys_start: CFG_PCI1_IO_PHYS,
+ size: CFG_PCI1_IO_SIZE,
+ flags: PCI_REGION_IO
+ }
+};
+
+void pci_init_board(void)
+{
+ char *s;
+ int i;
+ int warmboot;
+ int load_fpga;
+ volatile immap_t *immr;
+ volatile pcictrl83xx_t *pci_ctrl;
+ volatile gpio83xx_t *gpio;
+ volatile clk83xx_t *clk;
+ volatile law83xx_t *pci_law;
+ struct pci_region *reg[] = { pci_regions };
+
+ load_fpga = 1;
+ immr = (immap_t *) CFG_IMMR;
+ clk = (clk83xx_t *) &immr->clk;
+ pci_ctrl = immr->pci_ctrl;
+ pci_law = immr->sysconf.pcilaw;
+ gpio = (volatile gpio83xx_t *)&immr->gpio[0];
+
+ s = getenv("skip_fpga");
+ if (s) {
+ printf("found 'skip_fpga' -> FPGA _not_ loaded !\n");
+ load_fpga = 0;
+ }
+
+ gpio->dat = MV_GPIO_DAT;
+ gpio->odr = MV_GPIO_ODE;
+ if (load_fpga)
+ gpio->dir = MV_GPIO_OUT;
+ else
+ gpio->dir = MV_GPIO_OUT & ~(FPGA_DIN|FPGA_CCLK);
+
+ printf("SICRH / SICRL : 0x%08x / 0x%08x\n", immr->sysconf.sicrh,
+ immr->sysconf.sicrl);
+
+ mvblm7_init_fpga();
+ if (load_fpga)
+ mvblm7_load_fpga();
+
+ /* Enable PCI_CLK_OUTPUTs 0 and 1 with 1:1 clocking */
+ clk->occr = 0xc0000000;
+
+ pci_ctrl[0].gcr = 0;
+ udelay(2000);
+ pci_ctrl[0].gcr = 1;
+
+ for (i = 0; i < 1000; ++i)
+ udelay(1000);
+
+ pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+ pci_law[0].ar = LBLAWAR_EN | LBLAWAR_1GB;
+
+ pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+ pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
+
+ warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM;
+
+ mpc83xx_pci_init(1, reg, warmboot);
+}
*sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */
- proc_id = read_32bit_cp0_register(CP0_PRID);
+ proc_id = read_c0_prid();
switch (proc_id >> 24) {
case 0:
struct law_entry law_table[] = {
#ifndef CONFIG_SPD_EEPROM
- SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
+ SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
#endif
- SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
/* This is not so much the SDRAM map as it is the whole localbus map. */
- SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
- SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
- SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+ SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
};
int num_law_entries = ARRAY_SIZE(law_table);
struct law_entry law_table[] = {
#ifndef CONFIG_SPD_EEPROM
- SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
+ SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
#endif
- SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
/* This is not so much the SDRAM map as it is the whole localbus map. */
- SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
- SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
- SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+ SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
};
int num_law_entries = ARRAY_SIZE(law_table);
u32 proc_id;
u32 config1;
- proc_id = read_32bit_cp0_register(CP0_PRID);
+ proc_id = read_c0_prid();
printf("Board: Qemu -M mips CPU: ");
switch (proc_id) {
case 0x00018000:
printf("4KEc");
break;
case 0x00019300:
- config1 = read_mips32_cp0_config1();
+ config1 = read_c0_config1();
if (config1 & 1)
printf("24Kf");
else
printf("R4000");
break;
case 0x00018100:
- config1 = read_mips32_cp0_config1();
+ config1 = read_c0_config1();
if (config1 & 1)
printf("5Kf");
else
#define SPI_ADC_CS_MASK 0x00000800
#define SPI_DAC_CS_MASK 0x00001000
-void spi_adc_chipsel(int cs)
+static const u32 cs_mask[] = {
+ SPI_ADC_CS_MASK,
+ SPI_DAC_CS_MASK,
+};
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return bus == 0 && cs < sizeof(cs_mask) / sizeof(cs_mask[0]);
+}
+
+void spi_cs_activate(struct spi_slave *slave)
{
volatile ioport_t *iopd = ioport_addr((immap_t *)CFG_IMMR, 3 /* port D */);
- if(cs)
- iopd->pdat &= ~SPI_ADC_CS_MASK; /* activate the chip select */
- else
- iopd->pdat |= SPI_ADC_CS_MASK; /* deactivate the chip select */
+ iopd->pdat &= ~cs_mask[slave->cs];
}
-void spi_dac_chipsel(int cs)
+void spi_cs_deactivate(struct spi_slave *slave)
{
volatile ioport_t *iopd = ioport_addr((immap_t *)CFG_IMMR, 3 /* port D */);
- if(cs)
- iopd->pdat &= ~SPI_DAC_CS_MASK; /* activate the chip select */
- else
- iopd->pdat |= SPI_DAC_CS_MASK; /* deactivate the chip select */
+ iopd->pdat |= cs_mask[slave->cs];
}
-/*
- * The SPI command uses this table of functions for controlling the SPI
- * chip selects: it calls the appropriate function to control the SPI
- * chip selects.
- */
-spi_chipsel_type spi_chipsel[] = {
- spi_adc_chipsel,
- spi_dac_chipsel
-};
-int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
-
#endif
#endif /* CONFIG_MISC_INIT_R */
struct law_entry law_table[] = {
#ifndef CONFIG_SPD_EEPROM
- SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
+ SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
#endif
- SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
- SET_LAW_ENTRY(3, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
- SET_LAW_ENTRY(4, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
};
int num_law_entries = ARRAY_SIZE(law_table);
struct law_entry law_table[] = {
#ifndef CONFIG_SPD_EEPROM
- SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
+ SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
#endif
- SET_LAW_ENTRY(2, CFG_PCI_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
- SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_PCI_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_LBC),
};
int num_law_entries = ARRAY_SIZE(law_table);
struct law_entry law_table[] = {
- SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
- SET_LAW_ENTRY(2, CFG_PCI1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
- SET_LAW_ENTRY(3, CFG_PCI2_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
- SET_LAW_ENTRY(4, 0xf8000000, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
- SET_LAW_ENTRY(5, CFG_PCI1_IO_BASE, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
- SET_LAW_ENTRY(6, CFG_PCI2_IO_BASE, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
- SET_LAW_ENTRY(7, 0xfe000000, LAW_SIZE_32M, LAW_TRGT_IF_LBC),
- SET_LAW_ENTRY(8, CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
- SET_LAW_ENTRY(9, CFG_RIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
+ SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
+ SET_LAW(CFG_PCI1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+ SET_LAW(CFG_PCI2_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+ SET_LAW(0xf8000000, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_PCI1_IO_BASE, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
+ SET_LAW(CFG_PCI2_IO_BASE, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
+ SET_LAW(0xfe000000, LAW_SIZE_32M, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
+ SET_LAW(CFG_RIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
};
int num_law_entries = ARRAY_SIZE(law_table);
LIB = $(obj)lib$(BOARD).a
#
-COBJS := $(BOARD).o law.o tlb.o sdram.o
+COBJS := $(BOARD).o law.o tlb.o sdram.o nand.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
#
# socrates board
# default CCARBAR is at 0xff700000
-# assume U-Boot is less than 256k
#
-TEXT_BASE = 0xfffc0000
+TEXT_BASE = 0xfffa0000
/*
* LAW(Local Access Window) configuration:
*
- * 0x0000_0000 0x7fff_ffff DDR 2G
+ * 0x0000_0000 0x2fff_ffff DDR 512M
* 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
- * 0xc000_0000 0xdfff_ffff RapidIO 512M
- * 0xe000_0000 0xe000_ffff CCSR 1M
+ * 0xc000_0000 0xc00f_ffff FPGA 1M
+ * 0xe000_0000 0xe00f_ffff CCSR 1M (mapped by CCSRBAR)
* 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
- * 0xf800_0000 0xf80f_ffff BCSR 1M
- * 0xfe00_0000 0xffff_ffff FLASH (boot bank) 32M
+ * 0xfc00_0000 0xffff_ffff FLASH 64M
*
* Notes:
* CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
*/
struct law_entry law_table[] = {
- SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
- SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
- SET_LAW_ENTRY(3, CFG_LBC_FLASH_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
- SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
- SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+ SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
+ SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_LBC_FLASH_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+#if defined(CFG_FPGA_BASE)
+ SET_LAW(CFG_FPGA_BASE, LAWAR_SIZE_1M, LAW_TRGT_IF_LBC),
+#endif
};
int num_law_entries = ARRAY_SIZE(law_table);
--- /dev/null
+/*
+ * (C) Copyright 2008
+ * Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CFG_NAND_BASE)
+#include <nand.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+
+static int state;
+static void nand_write_byte(struct mtd_info *mtd, u_char byte);
+static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len);
+static void nand_write_word(struct mtd_info *mtd, u16 word);
+static u_char nand_read_byte(struct mtd_info *mtd);
+static u16 nand_read_word(struct mtd_info *mtd);
+static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len);
+static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len);
+static int nand_device_ready(struct mtd_info *mtdinfo);
+static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd);
+
+#define FPGA_NAND_CMD_MASK (0x7 << 28)
+#define FPGA_NAND_CMD_COMMAND (0x0 << 28)
+#define FPGA_NAND_CMD_ADDR (0x1 << 28)
+#define FPGA_NAND_CMD_READ (0x2 << 28)
+#define FPGA_NAND_CMD_WRITE (0x3 << 28)
+#define FPGA_NAND_BUSY (0x1 << 15)
+#define FPGA_NAND_ENABLE (0x1 << 31)
+#define FPGA_NAND_DATA_SHIFT 16
+
+/**
+ * nand_write_byte - write one byte to the chip
+ * @mtd: MTD device structure
+ * @byte: pointer to data byte to write
+ */
+static void nand_write_byte(struct mtd_info *mtd, u_char byte)
+{
+ nand_write_buf(mtd, (const uchar *)&byte, sizeof(byte));
+}
+
+/**
+ * nand_write_word - write one word to the chip
+ * @mtd: MTD device structure
+ * @word: data word to write
+ */
+static void nand_write_word(struct mtd_info *mtd, u16 word)
+{
+ nand_write_buf(mtd, (const uchar *)&word, sizeof(word));
+}
+
+/**
+ * nand_write_buf - write buffer to chip
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ int i;
+ struct nand_chip *this = mtd->priv;
+ long val;
+
+ if ((state & FPGA_NAND_CMD_MASK) == FPGA_NAND_CMD_MASK) {
+ /* Write data */
+ val = (state & FPGA_NAND_ENABLE) | FPGA_NAND_CMD_WRITE;
+ } else {
+ /* Write address or command */
+ val = state;
+ }
+
+ for (i = 0; i < len; i++) {
+ out_be32(this->IO_ADDR_W, val | (buf[i] << FPGA_NAND_DATA_SHIFT));
+ }
+}
+
+
+/**
+ * nand_read_byte - read one byte from the chip
+ * @mtd: MTD device structure
+ */
+static u_char nand_read_byte(struct mtd_info *mtd)
+{
+ u8 byte;
+ nand_read_buf(mtd, (uchar *)&byte, sizeof(byte));
+ return byte;
+}
+
+/**
+ * nand_read_word - read one word from the chip
+ * @mtd: MTD device structure
+ */
+static u16 nand_read_word(struct mtd_info *mtd)
+{
+ u16 word;
+ nand_read_buf(mtd, (uchar *)&word, sizeof(word));
+ return word;
+}
+
+/**
+ * nand_read_buf - read chip data into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ int i;
+ struct nand_chip *this = mtd->priv;
+ int val;
+
+ val = (state & FPGA_NAND_ENABLE) | FPGA_NAND_CMD_READ;
+
+ out_be32(this->IO_ADDR_W, val);
+ for (i = 0; i < len; i++) {
+ buf[i] = (in_be32(this->IO_ADDR_R) >> FPGA_NAND_DATA_SHIFT) & 0xff;
+ }
+}
+
+/**
+ * nand_verify_buf - Verify chip data against buffer
+ * @mtd: MTD device structure
+ * @buf: buffer containing the data to compare
+ * @len: number of bytes to compare
+ */
+static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++) {
+ if (buf[i] != nand_read_byte(mtd));
+ return -EFAULT;
+ }
+ return 0;
+}
+
+/**
+ * nand_device_ready - Check the NAND device is ready for next command.
+ * @mtd: MTD device structure
+ */
+static int nand_device_ready(struct mtd_info *mtdinfo)
+{
+ struct nand_chip *this = mtdinfo->priv;
+
+ if (in_be32(this->IO_ADDR_W) & FPGA_NAND_BUSY)
+ return 0; /* busy */
+ return 1;
+}
+
+/**
+ * nand_hwcontrol - NAND control functions wrapper.
+ * @mtd: MTD device structure
+ * @cmd: Command
+ */
+static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+{
+
+ switch(cmd) {
+ case NAND_CTL_CLRALE:
+ state |= FPGA_NAND_CMD_MASK; /* use all 1s to mark */
+ break;
+ case NAND_CTL_CLRCLE:
+ state |= FPGA_NAND_CMD_MASK; /* use all 1s to mark */
+ break;
+ case NAND_CTL_SETCLE:
+ state = (state & ~FPGA_NAND_CMD_MASK) | FPGA_NAND_CMD_COMMAND;
+ break;
+ case NAND_CTL_SETALE:
+ state = (state & ~FPGA_NAND_CMD_MASK) | FPGA_NAND_CMD_ADDR;
+ break;
+ case NAND_CTL_SETNCE:
+ state |= FPGA_NAND_ENABLE;
+ break;
+ case NAND_CTL_CLRNCE:
+ state &= ~FPGA_NAND_ENABLE;
+ break;
+ default:
+ printf("%s: unknown cmd %#x\n", __FUNCTION__, cmd);
+ break;
+ }
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+ nand->hwcontrol = nand_hwcontrol;
+ nand->eccmode = NAND_ECC_SOFT;
+ nand->dev_ready = nand_device_ready;
+ nand->write_byte = nand_write_byte;
+ nand->read_byte = nand_read_byte;
+ nand->write_word = nand_write_word;
+ nand->read_word = nand_read_word;
+ nand->write_buf = nand_write_buf;
+ nand->read_buf = nand_read_buf;
+ nand->verify_buf = nand_verify_buf;
+
+ return 0;
+}
+
+#endif
#include <flash.h>
#include <libfdt.h>
#include <fdt_support.h>
+#include <asm/io.h>
+#if defined(CFG_FPGA_BASE)
+#include "upm_table.h"
+#endif
DECLARE_GLOBAL_DATA_PTR;
extern flash_info_t flash_info[]; /* FLASH chips info */
int checkboard (void)
{
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ char *src;
+ int f;
char *s = getenv("serial#");
puts("Board: Socrates");
putc('\n');
#ifdef CONFIG_PCI
- printf ("PCI1: 32 bit, %d MHz (compiled)\n",
- CONFIG_SYS_CLK_FREQ / 1000000);
+ /* Check the PCI_clk sel bit */
+ if (in_be32(&gur->porpllsr) & (1<<15)) {
+ src = "SYSCLK";
+ f = CONFIG_SYS_CLK_FREQ;
+ } else {
+ src = "PCI_CLK";
+ f = CONFIG_PCI_CLK_FREQ;
+ }
+ printf ("PCI1: 32 bit, %d MHz (%s)\n", f/1000000, src);
#else
printf ("PCI1: disabled\n");
#endif
* Initialize local bus.
*/
local_bus_init ();
-
+#if defined(CFG_FPGA_BASE)
+ /* Init UPMA for FPGA access */
+ upmconfig(UPMA, (uint *)UPMTableA, sizeof(UPMTableA)/sizeof(int));
+#endif
return 0;
}
if (rc)
printf("Unable to update property NOR mapping, err=%s\n",
fdt_strerror(rc));
+
+#if defined (CFG_FPGA_BASE)
+ memset(val, 0, sizeof(val));
+ val[0] = CFG_FPGA_BASE;
+ rc = fdt_find_and_setprop(blob, "/localbus/fpga", "virtual-reg",
+ val, sizeof(val), 1);
+ if (rc)
+ printf("Unable to update property \"fpga\", err=%s\n",
+ fdt_strerror(rc));
+#endif
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
/*
- * TLB 0, 1: 128M Non-cacheable, guarded
- * 0xf8000000 128M FLASH
+ * TLB 0: 64M Non-cacheable, guarded
+ * 0xfc000000 64M FLASH
* Out of reset this entry is only 4K.
*/
SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 1, BOOKE_PAGESZ_64M, 1),
- SET_TLB_ENTRY(1, CFG_FLASH_BASE + 0x4000000, CFG_FLASH_BASE + 0x4000000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 0, BOOKE_PAGESZ_64M, 1),
/*
* TLB 2: 256M Non-cacheable, guarded
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 3, BOOKE_PAGESZ_256M, 1),
+#if defined(CFG_FPGA_BASE)
/*
- * TLB 4: 256M Non-cacheable, guarded
- * 0xc0000000 256M Rapid IO MEM First half
- */
- SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 4, BOOKE_PAGESZ_256M, 1),
-
- /*
- * TLB 5: 256M Non-cacheable, guarded
- * 0xd0000000 256M Rapid IO MEM Second half
+ * TLB 4: 1M Non-cacheable, guarded
+ * 0xc0000000 1M FPGA and NAND
*/
- SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000,
+ SET_TLB_ENTRY(1, CFG_FPGA_BASE, CFG_FPGA_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 5, BOOKE_PAGESZ_256M, 1),
+ 0, 4, BOOKE_PAGESZ_1M, 1),
+#endif
/*
* TLB 6: 64M Non-cacheable, guarded
--- /dev/null
+/*
+ * (C) Copyright 2008
+ * Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com.
+ *
+ * Copyright 2004, 2007 Freescale Semiconductor, Inc.
+ * (C) Copyright 2003 Motorola Inc.
+ * Xianghua Xiao, (X.Xiao@motorola.com)
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __UPM_TABLE_H
+#define __UPM_TABLE_H
+
+/* UPM Table Configuration Code for FPGA access */
+static const unsigned int UPMTableA[] =
+{
+ 0x00fcfc00, 0x00fcfc00, 0x00fcfc00, 0x00fcfc00, //Words 0 to 3
+ 0x00fcfc00, 0x00fcfc00, 0x00fcfc00, 0x00fcfc05, //Words 4 to 7
+ 0x00fcfc00, 0x00fcfc00, 0x00fcfc04, 0x00fcfc04, //Words 8 to 11
+ 0x00fcfc04, 0x00fcfc04, 0x00fcfc04, 0x00fcfc04, //Words 12 to 15
+ 0x00fcfc04, 0x00fcfc04, 0x00fcfc00, 0xfffffc00, //Words 16 to 19
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, //Words 20 to 23
+ 0x0ffffc00, 0x0ffffc00, 0x0ffffc00, 0x00f3fc04, //Words 24 to 27
+ 0x0ffffc00, 0xfffffc01, 0xfffffc00, 0xfffffc01, //Words 28 to 31
+ 0x0ffffc00, 0x00f3fc04, 0x00f3fc04, 0x00f3fc04, //Words 32 to 35
+ 0x00f3fc04, 0x00f3fc04, 0x00f3fc04, 0x00f3fc04, //Words 36 to 39
+ 0x00f3fc04, 0x0ffffc00, 0xfffffc00, 0xfffffc00, //Words 40 to 43
+ 0xfffffc01, 0xfffffc00, 0xfffffc00, 0xfffffc01, //Words 44 to 47
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, //Words 48 to 51
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, //Words 52 to 55
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, //Words 56 to 59
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01 //Words 60 to 63
+};
+
+#endif
#define SPI_RTC_CS_MASK 0x00000001
-void spi_rtc_chipsel(int cs)
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return bus == 0 && cs == 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
{
nios_spi_t *spi = (nios_spi_t *)CFG_NIOS_SPIBASE;
- if (cs)
- spi->slaveselect = SPI_RTC_CS_MASK; /* activate (1) */
- else
- spi->slaveselect = 0; /* deactivate (0) */
+ spi->slaveselect = SPI_RTC_CS_MASK; /* activate (1) */
}
-/*
- * The SPI command uses this table of functions for controlling the SPI
- * chip selects: it calls the appropriate function to control the SPI
- * chip selects.
- */
-spi_chipsel_type spi_chipsel[] = {
- spi_rtc_chipsel
-};
-int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ nios_spi_t *spi = (nios_spi_t *)CFG_NIOS_SPIBASE;
+
+ spi->slaveselect = 0; /* deactivate (0) */
+}
#endif
struct law_entry law_table[] = {
#ifndef CONFIG_SPD_EEPROM
- SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
+ SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
#endif
- SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
/* This is not so much the SDRAM map as it is the whole localbus map. */
- SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
- SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
- SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+ SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
};
int num_law_entries = ARRAY_SIZE(law_table);
struct law_entry law_table[] = {
#ifndef CONFIG_SPD_EEPROM
- SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
+ SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
#endif
- SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
- SET_LAW_ENTRY(3, CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
- SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
- SET_LAW_ENTRY(5, CFG_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
+ SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+ SET_LAW(CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+ SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
+ SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
/* Map the whole localbus, including flash and reset latch. */
- SET_LAW_ENTRY(6, CFG_LBC_OPTION_BASE, LAWAR_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_LBC_OPTION_BASE, LAWAR_SIZE_256M, LAW_TRGT_IF_LBC),
};
int num_law_entries = ARRAY_SIZE(law_table);
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o sdram.o law.o tlb.o
+COBJS-y += $(BOARD).o
+COBJS-y += sdram.o
+COBJS-y += law.o
+COBJS-y += tlb.o
+COBJS-$(CONFIG_NAND) += nand.o
+
+COBJS := $(COBJS-y)
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * Standard mapping:
+ *
+ * 0x0000_0000 0x7fff_ffff DDR 2G
+ * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
+ * 0xc000_0000 0xdfff_ffff RapidIO or PCI express 512M
+ * 0xe000_0000 0xe000_ffff CCSR 1M
+ * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
+ * 0xe300_0000 0xe3ff_ffff CAN and NAND Flash 16M
+ * 0xef00_0000 0xefff_ffff PCI express IO 16M
+ * 0xfc00_0000 0xffff_ffff FLASH (boot bank) 128M
+ *
+ * Big FLASH mapping:
+ *
+ * 0x0000_0000 0x7fff_ffff DDR 2G
+ * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
+ * 0xa000_0000 0xa000_ffff CCSR 1M
+ * 0xa200_0000 0xa2ff_ffff PCI1 IO 16M
+ * 0xa300_0000 0xa3ff_ffff CAN and NAND Flash 16M
+ * 0xaf00_0000 0xafff_ffff PCI express IO 16M
+ * 0xb000_0000 0xbfff_ffff RapidIO or PCI express 256M
+ * 0xc000_0000 0xffff_ffff FLASH (boot bank) 1G
+ *
+ * Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ */
+
+#ifdef CONFIG_TQM_BIGFLASH
+#define LAW_3_SIZE LAW_SIZE_1G
+#define LAW_5_SIZE LAW_SIZE_256M
+#else
+#define LAW_3_SIZE LAW_SIZE_128M
+#define LAW_5_SIZE LAW_SIZE_512M
+#endif
+
+struct law_entry law_table[] = {
+ SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
+ SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ SET_LAW(CFG_LBC_FLASH_BASE, LAW_3_SIZE, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+#ifdef CONFIG_PCIE1
+ SET_LAW(CFG_PCIE1_MEM_BASE, LAW_5_SIZE, LAW_TRGT_IF_PCIE_1),
+#else /* !CONFIG_PCIE1 */
+ SET_LAW(CFG_RIO_MEM_BASE, LAW_5_SIZE, LAW_TRGT_IF_RIO),
+#endif /* CONFIG_PCIE1 */
+#if defined(CONFIG_CAN_DRIVER) || defined(CONFIG_NAND)
+ SET_LAW(CFG_CAN_BASE, LAW_SIZE_16M, LAW_TRGT_IF_LBC),
+#endif /* CONFIG_CAN_DRIVER || CONFIG_NAND */
+#ifdef CONFIG_PCIE1
+ SET_LAW(CFG_PCIE1_IO_BASE, LAW_SIZE_16M, LAW_TRGT_IF_PCIE_1),
+#endif /* CONFIG_PCIE */
+};
+
+int num_law_entries = ARRAY_SIZE (law_table);
--- /dev/null
+/*
+ * (C) Copyright 2008 Wolfgang Grandegger <wg@denx.de>
+ *
+ * (C) Copyright 2006
+ * Thomas Waehner, TQ-System GmbH, thomas.waehner@tqs.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/fsl_upm.h>
+#include <ioports.h>
+
+#include <nand.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern uint get_lbc_clock (void);
+
+/* index of UPM RAM array run pattern for NAND command cycle */
+#define CFG_NAN_UPM_WRITE_CMD_OFS 0x08
+
+/* index of UPM RAM array run pattern for NAND address cycle */
+#define CFG_NAND_UPM_WRITE_ADDR_OFS 0x10
+
+/* Structure for table with supported UPM timings */
+struct upm_freq {
+ ulong freq;
+ const u32 *upm_patt;
+ uchar gpl4_disable;
+ uchar ehtr;
+ uchar ead;
+};
+
+/* NAND-FLASH UPM tables for TQM85XX according to TQM8548.pq.timing.101.doc */
+
+/* UPM pattern for bus clock = 25 MHz */
+static const u32 upm_patt_25[] = {
+ /* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
+ /* 0x00 */ 0x0ff32000, 0x0fa32000, 0x3fb32005, 0xfffffc00,
+ /* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Read Burst RAM array entry -> NAND Write CMD */
+ /* 0x08 */ 0x00ff2c30, 0x00ff2c30, 0x0fff2c35, 0xfffffc00,
+ /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Read Burst RAM array entry -> NAND Write ADDR */
+ /* 0x10 */ 0x00f3ec30, 0x00f3ec30, 0x0ff3ec35, 0xfffffc00,
+ /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Write Single RAM array entry -> NAND Write Data */
+ /* 0x18 */ 0x00f32c00, 0x00f32c00, 0x0ff32c05, 0xfffffc00,
+ /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Write Burst RAM array entry -> unused */
+ /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+ /* UPM Refresh Timer RAM array entry -> unused */
+ /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+ /* UPM Exception RAM array entry -> unsused */
+ /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+};
+
+/* UPM pattern for bus clock = 33.3 MHz */
+static const u32 upm_patt_33[] = {
+ /* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
+ /* 0x00 */ 0x0ff32000, 0x0fa32100, 0x3fb32005, 0xfffffc00,
+ /* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Read Burst RAM array entry -> NAND Write CMD */
+ /* 0x08 */ 0x00ff2c30, 0x00ff2c30, 0x0fff2c35, 0xfffffc00,
+ /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Read Burst RAM array entry -> NAND Write ADDR */
+ /* 0x10 */ 0x00f3ec30, 0x00f3ec30, 0x0ff3ec35, 0xfffffc00,
+ /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Write Single RAM array entry -> NAND Write Data */
+ /* 0x18 */ 0x00f32c00, 0x00f32c00, 0x0ff32c05, 0xfffffc00,
+ /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Write Burst RAM array entry -> unused */
+ /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+ /* UPM Refresh Timer RAM array entry -> unused */
+ /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+ /* UPM Exception RAM array entry -> unsused */
+ /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+};
+
+/* UPM pattern for bus clock = 41.7 MHz */
+static const u32 upm_patt_42[] = {
+ /* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
+ /* 0x00 */ 0x0ff32000, 0x0fa32100, 0x3fb32005, 0xfffffc00,
+ /* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Read Burst RAM array entry -> NAND Write CMD */
+ /* 0x08 */ 0x00ff2c30, 0x00ff2c30, 0x0fff2c35, 0xfffffc00,
+ /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Read Burst RAM array entry -> NAND Write ADDR */
+ /* 0x10 */ 0x00f3ec30, 0x00f3ec30, 0x0ff3ec35, 0xfffffc00,
+ /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Write Single RAM array entry -> NAND Write Data */
+ /* 0x18 */ 0x00f32c00, 0x00f32c00, 0x0ff32c05, 0xfffffc00,
+ /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Write Burst RAM array entry -> unused */
+ /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+ /* UPM Refresh Timer RAM array entry -> unused */
+ /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+ /* UPM Exception RAM array entry -> unsused */
+ /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+};
+
+/* UPM pattern for bus clock = 50 MHz */
+static const u32 upm_patt_50[] = {
+ /* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
+ /* 0x00 */ 0x0ff33000, 0x0fa33100, 0x0fa33005, 0xfffffc00,
+ /* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Read Burst RAM array entry -> NAND Write CMD */
+ /* 0x08 */ 0x00ff3d30, 0x00ff3c30, 0x0fff3c35, 0xfffffc00,
+ /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Read Burst RAM array entry -> NAND Write ADDR */
+ /* 0x10 */ 0x00f3fd30, 0x00f3fc30, 0x0ff3fc35, 0xfffffc00,
+ /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Write Single RAM array entry -> NAND Write Data */
+ /* 0x18 */ 0x00f33d00, 0x00f33c00, 0x0ff33c05, 0xfffffc00,
+ /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Write Burst RAM array entry -> unused */
+ /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+ /* UPM Refresh Timer RAM array entry -> unused */
+ /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+ /* UPM Exception RAM array entry -> unsused */
+ /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+};
+
+/* UPM pattern for bus clock = 66.7 MHz */
+static const u32 upm_patt_67[] = {
+ /* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
+ /* 0x00 */ 0x0ff33000, 0x0fe33000, 0x0fa33100, 0x0fa33000,
+ /* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Read Burst RAM array entry -> NAND Write CMD */
+ /* 0x08 */ 0x00ff3d30, 0x00ff3c30, 0x0fff3c30, 0x0fff3c35,
+ /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Read Burst RAM array entry -> NAND Write ADDR */
+ /* 0x10 */ 0x00f3fd30, 0x00f3fc30, 0x0ff3fc30, 0x0ff3fc35,
+ /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Write Single RAM array entry -> NAND Write Data */
+ /* 0x18 */ 0x00f33d00, 0x00f33c00, 0x0ff33c00, 0x0ff33c05,
+ /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Write Burst RAM array entry -> unused */
+ /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+ /* UPM Refresh Timer RAM array entry -> unused */
+ /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+ /* UPM Exception RAM array entry -> unsused */
+ /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+};
+
+/* UPM pattern for bus clock = 83.3 MHz */
+static const u32 upm_patt_83[] = {
+ /* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
+ /* 0x00 */ 0x0ff33000, 0x0fe33000, 0x0fa33100, 0x0fa33000,
+ /* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Read Burst RAM array entry -> NAND Write CMD */
+ /* 0x08 */ 0x00ff3e30, 0x00ff3c30, 0x0fff3c30, 0x0fff3c35,
+ /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Read Burst RAM array entry -> NAND Write ADDR */
+ /* 0x10 */ 0x00f3fe30, 0x00f3fc30, 0x0ff3fc30, 0x0ff3fc35,
+ /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Write Single RAM array entry -> NAND Write Data */
+ /* 0x18 */ 0x00f33e00, 0x00f33c00, 0x0ff33c00, 0x0ff33c05,
+ /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Write Burst RAM array entry -> unused */
+ /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+ /* UPM Refresh Timer RAM array entry -> unused */
+ /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+ /* UPM Exception RAM array entry -> unsused */
+ /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+};
+
+/* UPM pattern for bus clock = 100 MHz */
+static const u32 upm_patt_100[] = {
+ /* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
+ /* 0x00 */ 0x0ff33100, 0x0fe33000, 0x0fa33200, 0x0fa33000,
+ /* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Read Burst RAM array entry -> NAND Write CMD */
+ /* 0x08 */ 0x00ff3f30, 0x00ff3c30, 0x0fff3c30, 0x0fff3c35,
+ /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Read Burst RAM array entry -> NAND Write ADDR */
+ /* 0x10 */ 0x00f3ff30, 0x00f3fc30, 0x0ff3fc30, 0x0ff3fc35,
+ /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Write Single RAM array entry -> NAND Write Data */
+ /* 0x18 */ 0x00f33f00, 0x00f33c00, 0x0ff33c00, 0x0ff33c05,
+ /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Write Burst RAM array entry -> unused */
+ /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+ /* UPM Refresh Timer RAM array entry -> unused */
+ /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+ /* UPM Exception RAM array entry -> unsused */
+ /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+};
+
+/* UPM pattern for bus clock = 133.3 MHz */
+static const u32 upm_patt_133[] = {
+ /* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
+ /* 0x00 */ 0x0ff33100, 0x0fe33000, 0x0fa33300, 0x0fa33000,
+ /* 0x04 */ 0x0fa33000, 0x0fa33005, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Read Burst RAM array entry -> NAND Write CMD */
+ /* 0x08 */ 0x00ff3f30, 0x00ff3d30, 0x0fff3d30, 0x0fff3c35,
+ /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Read Burst RAM array entry -> NAND Write ADDR */
+ /* 0x10 */ 0x00f3ff30, 0x00f3fd30, 0x0ff3fd30, 0x0ff3fc35,
+ /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Write Single RAM array entry -> NAND Write Data */
+ /* 0x18 */ 0x00f33f00, 0x00f33d00, 0x0ff33d00, 0x0ff33c05,
+ /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Write Burst RAM array entry -> unused */
+ /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+ /* UPM Refresh Timer RAM array entry -> unused */
+ /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+ /* UPM Exception RAM array entry -> unsused */
+ /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+};
+
+/* UPM pattern for bus clock = 166.7 MHz */
+static const u32 upm_patt_167[] = {
+ /* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
+ /* 0x00 */ 0x0ff33200, 0x0fe33000, 0x0fa33300, 0x0fa33300,
+ /* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Read Burst RAM array entry -> NAND Write CMD */
+ /* 0x08 */ 0x00ff3f30, 0x00ff3f30, 0x0fff3e30, 0xffff3c35,
+ /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Read Burst RAM array entry -> NAND Write ADDR */
+ /* 0x10 */ 0x00f3ff30, 0x00f3ff30, 0x0ff3fe30, 0x0ff3fc35,
+ /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Write Single RAM array entry -> NAND Write Data */
+ /* 0x18 */ 0x00f33f00, 0x00f33f00, 0x0ff33e00, 0x0ff33c05,
+ /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+ /* UPM Write Burst RAM array entry -> unused */
+ /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+ /* UPM Refresh Timer RAM array entry -> unused */
+ /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+ /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+ /* UPM Exception RAM array entry -> unsused */
+ /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+};
+
+/* Supported UPM timings */
+struct upm_freq upm_freq_table[] = {
+ /* nominal freq. | ptr to table | GPL4 dis. | EHTR | EAD */
+ {25000000, upm_patt_25, 1, 0, 0},
+ {33333333, upm_patt_33, 1, 0, 0},
+ {41666666, upm_patt_42, 1, 0, 0},
+ {50000000, upm_patt_50, 0, 0, 0},
+ {66666666, upm_patt_67, 0, 0, 0},
+ {83333333, upm_patt_83, 0, 0, 0},
+ {100000000, upm_patt_100, 0, 1, 1},
+ {133333333, upm_patt_133, 0, 1, 1},
+ {166666666, upm_patt_167, 0, 1, 1},
+};
+
+#define UPM_FREQS (sizeof(upm_freq_table) / sizeof(struct upm_freq))
+
+volatile const u32 *nand_upm_patt;
+
+/*
+ * write into UPMB ram
+ */
+static void upmb_write (u_char addr, ulong val)
+{
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+
+ out_be32 (&lbc->mdr, val);
+
+ clrsetbits_be32(&lbc->mbmr, MxMR_MAD_MSK,
+ MxMR_OP_WARR | (addr & MxMR_MAD_MSK));
+
+ /* dummy access to perform write */
+ out_8 ((void __iomem *)CFG_NAND0_BASE, 0);
+
+ clrbits_be32(&lbc->mbmr, MxMR_OP_WARR);
+}
+
+/*
+ * Initialize UPM for NAND flash access.
+ */
+static void nand_upm_setup (volatile ccsr_lbc_t *lbc)
+{
+ uint i;
+ uint or3 = CFG_OR3_PRELIM;
+ uint clock = get_lbc_clock ();
+
+ out_be32 (&lbc->br3, 0); /* disable bank and reset all bits */
+ out_be32 (&lbc->br3, CFG_BR3_PRELIM);
+
+ /*
+ * Search appropriate UPM table for bus clock.
+ * If the bus clock exceeds a tolerated value, take the UPM timing for
+ * the next higher supported frequency to ensure that access works
+ * (even the access may be slower then).
+ */
+ for (i = 0; (i < UPM_FREQS) && (clock > upm_freq_table[i].freq); i++)
+ ;
+
+ if (i >= UPM_FREQS)
+ /* no valid entry found */
+ /* take last entry with configuration for max. bus clock */
+ i--;
+
+ if (upm_freq_table[i].ehtr) {
+ /* EHTR must be set due to TQM8548 timing specification */
+ or3 |= OR_UPM_EHTR;
+ }
+ if (upm_freq_table[i].ead)
+ /* EAD must be set due to TQM8548 timing specification */
+ or3 |= OR_UPM_EAD;
+
+ out_be32 (&lbc->or3, or3);
+
+ /* Assign address of table */
+ nand_upm_patt = upm_freq_table[i].upm_patt;
+
+ for (i = 0; i < 64; i++) {
+ upmb_write (i, *nand_upm_patt);
+ nand_upm_patt++;
+ }
+
+ /* Put UPM back to normal operation mode */
+ if (upm_freq_table[i].gpl4_disable)
+ /* GPL4 must be disabled according to timing specification */
+ out_be32 (&lbc->mbmr, MxMR_OP_NORM | MxMR_GPL_x4DIS);
+
+ return;
+}
+
+static struct fsl_upm_nand fun = {
+ .width = 8,
+ .upm_cmd_offset = 0x08,
+ .upm_addr_offset = 0x10,
+ .chip_delay = NAND_BIG_DELAY_US,
+};
+
+void board_nand_select_device (struct nand_chip *nand, int chip)
+{
+}
+
+int board_nand_init (struct nand_chip *nand)
+{
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+
+ if (!nand_upm_patt)
+ nand_upm_setup (lbc);
+
+ fun.upm.io_addr = nand->IO_ADDR_R;
+ fun.upm.mxmr = (void __iomem *)&lbc->mbmr;
+ fun.upm.mdr = (void __iomem *)&lbc->mdr;
+ fun.upm.mar = (void __iomem *)&lbc->mar;
+
+ return fsl_upm_nand_init (nand, &fun);
+}
--- /dev/null
+/*
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+
+struct sdram_conf_s {
+ unsigned long size;
+ unsigned long reg;
+#ifdef CONFIG_TQM8548
+ unsigned long refresh;
+#endif /* CONFIG_TQM8548 */
+};
+
+typedef struct sdram_conf_s sdram_conf_t;
+
+#ifdef CONFIG_TQM8548
+sdram_conf_t ddr_cs_conf[] = {
+ {(512 << 20), 0x80044102, 0x0001A000}, /* 512MB, 13x10(4) */
+ {(256 << 20), 0x80040102, 0x00014000}, /* 256MB, 13x10(4) */
+ {(128 << 20), 0x80040101, 0x0000C000}, /* 128MB, 13x9(4) */
+};
+#else /* !CONFIG_TQM8548 */
+sdram_conf_t ddr_cs_conf[] = {
+ {(512 << 20), 0x80000202}, /* 512MB, 14x10(4) */
+ {(256 << 20), 0x80000102}, /* 256MB, 13x10(4) */
+ {(128 << 20), 0x80000101}, /* 128MB, 13x9(4) */
+ {( 64 << 20), 0x80000001}, /* 64MB, 12x9(4) */
+};
+#endif /* CONFIG_TQM8548 */
+
+#define N_DDR_CS_CONF (sizeof(ddr_cs_conf) / sizeof(ddr_cs_conf[0]))
+
+int cas_latency (void);
+
+/*
+ * Autodetect onboard DDR SDRAM on 85xx platforms
+ *
+ * NOTE: Some of the hardcoded values are hardware dependant,
+ * so this should be extended for other future boards
+ * using this routine!
+ */
+long int sdram_setup (int casl)
+{
+ int i;
+ volatile ccsr_ddr_t *ddr = (void *)(CFG_MPC85xx_DDR_ADDR);
+#ifdef CONFIG_TQM8548
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+#else /* !CONFIG_TQM8548 */
+ unsigned long cfg_ddr_timing1;
+ unsigned long cfg_ddr_mode;
+#endif /* CONFIG_TQM8548 */
+
+ /*
+ * Disable memory controller.
+ */
+ ddr->cs0_config = 0;
+ ddr->sdram_cfg = 0;
+
+#ifdef CONFIG_TQM8548
+ ddr->cs0_bnds = (ddr_cs_conf[0].size - 1) >> 24;
+ ddr->cs0_config = ddr_cs_conf[0].reg;
+ ddr->timing_cfg_3 = 0x00010000;
+
+ /* TIMING CFG 1, 533MHz
+ * PRETOACT: 4 Clocks
+ * ACTTOPRE: 12 Clocks
+ * ACTTORW: 4 Clocks
+ * CASLAT: 4 Clocks
+ * REFREC: 34 Clocks
+ * WRREC: 4 Clocks
+ * ACTTOACT: 3 Clocks
+ * WRTORD: 2 Clocks
+ */
+ ddr->timing_cfg_1 = 0x4C47A432;
+
+ /* TIMING CFG 2, 533MHz
+ * ADD_LAT: 3 Clocks
+ * CPO: READLAT + 1
+ * WR_LAT: 3 Clocks
+ * RD_TO_PRE: 2 Clocks
+ * WR_DATA_DELAY: 1/2 Clock
+ * CKE_PLS: 1 Clock
+ * FOUR_ACT: 13 Clocks
+ */
+ ddr->timing_cfg_2 = 0x3318484D;
+
+ /* DDR SDRAM Mode, 533MHz
+ * MRS: Extended Mode Register
+ * OUT: Outputs enabled
+ * RDQS: no
+ * DQS: enabled
+ * OCD: default state
+ * RTT: 75 Ohms
+ * Posted CAS: 3 Clocks
+ * ODS: reduced strength
+ * DLL: enabled
+ * MR: Mode Register
+ * PD: fast exit
+ * WR: 4 Clocks
+ * DLL: no DLL reset
+ * TM: normal
+ * CAS latency: 4 Clocks
+ * BT: sequential
+ * Burst length: 4
+ */
+ ddr->sdram_mode = 0x439E0642;
+
+ /* DDR SDRAM Interval, 533MHz
+ * REFINT: 1040 Clocks
+ * BSTOPRE: 256
+ */
+ ddr->sdram_interval = (1040 << 16) | 0x100;
+
+ /*
+ * workaround for erratum DD10 of MPC8458 family below rev. 2.0:
+ * DDR IO receiver must be set to an acceptable bias point by modifying
+ * a hidden register.
+ */
+ if (SVR_REV (get_svr ()) < 0x20) {
+ gur->ddrioovcr = 0x90000000; /* enable, VSEL 1.8V */
+ }
+
+ /* DDR SDRAM CFG 2
+ * FRC_SR: normal mode
+ * SR_IE: no self-refresh interrupt
+ * DLL_RST_DIS: don't care, leave at reset value
+ * DQS_CFG: differential DQS signals
+ * ODT_CFG: assert ODT to internal IOs only during reads to DRAM
+ * LVWx_CFG: don't care, leave at reset value
+ * NUM_PR: 1 refresh will be issued at a time
+ * DM_CFG: don't care, leave at reset value
+ * D_INIT: no data initialization
+ */
+ ddr->sdram_cfg_2 = 0x04401000;
+
+ /* DDR SDRAM MODE 2
+ * MRS: Extended Mode Register 2
+ */
+ ddr->sdram_mode_2 = 0x8000C000;
+
+ /* DDR SDRAM CLK CNTL
+ * CLK_ADJUST: 1/2 Clock 0x02000000
+ * CLK_ADJUST: 5/8 Clock 0x02800000
+ */
+ ddr->sdram_clk_cntl = 0x02800000;
+
+ /* wait for clock stabilization */
+ asm ("sync;isync;msync");
+ udelay(1000);
+
+ /* DDR SDRAM CLK CNTL
+ * MEM_EN: enabled
+ * SREN: don't care, leave at reset value
+ * ECC_EN: no error report
+ * RD_EN: no register DIMMs
+ * SDRAM_TYPE: DDR2
+ * DYN_PWR: no power management
+ * 32_BE: don't care, leave at reset value
+ * 8_BE: 4 beat burst
+ * NCAP: don't care, leave at reset value
+ * 2T_EN: 1T Timing
+ * BA_INTLV_CTL: no interleaving
+ * x32_EN: x16 organization
+ * PCHB8: MA[10] for auto-precharge
+ * HSE: half strength for single and 2-layer stacks
+ * (full strength for 3- and 4-layer stacks no yet considered)
+ * MEM_HALT: no halt
+ * BI: automatic initialization
+ */
+ ddr->sdram_cfg = 0x83000008;
+ asm ("sync; isync; msync");
+ udelay(1000);
+
+#else /* !CONFIG_TQM8548 */
+ switch (casl) {
+ case 20:
+ cfg_ddr_timing1 = 0x47405331 | (3 << 16);
+ cfg_ddr_mode = 0x40020002 | (2 << 4);
+ break;
+
+ case 25:
+ cfg_ddr_timing1 = 0x47405331 | (4 << 16);
+ cfg_ddr_mode = 0x40020002 | (6 << 4);
+ break;
+
+ case 30:
+ default:
+ cfg_ddr_timing1 = 0x47405331 | (5 << 16);
+ cfg_ddr_mode = 0x40020002 | (3 << 4);
+ break;
+ }
+
+ ddr->cs0_bnds = (ddr_cs_conf[0].size - 1) >> 24;
+ ddr->cs0_config = ddr_cs_conf[0].reg;
+ ddr->timing_cfg_1 = cfg_ddr_timing1;
+ ddr->timing_cfg_2 = 0x00000800; /* P9-45,may need tuning */
+ ddr->sdram_mode = cfg_ddr_mode;
+ ddr->sdram_interval = 0x05160100; /* autocharge,no open page */
+ ddr->err_disable = 0x0000000D;
+
+ asm ("sync; isync; msync");
+ udelay (1000);
+
+ ddr->sdram_cfg = 0xc2000000; /* unbuffered,no DYN_PWR */
+ asm ("sync; isync; msync");
+ udelay (1000);
+#endif /* CONFIG_TQM8548 */
+
+ for (i = 0; i < N_DDR_CS_CONF; i++) {
+ ddr->cs0_config = ddr_cs_conf[i].reg;
+
+ if (get_ram_size (0, ddr_cs_conf[i].size) ==
+ ddr_cs_conf[i].size) {
+ /*
+ * size detected -> set Chip Select Bounds Register
+ */
+ ddr->cs0_bnds = (ddr_cs_conf[i].size - 1) >> 24;
+
+ break;
+ }
+ }
+
+#ifdef CONFIG_TQM8548
+ if (i < N_DDR_CS_CONF) {
+ /* Adjust refresh rate for DDR2 */
+
+ ddr->timing_cfg_3 = ddr_cs_conf[i].refresh & 0x00070000;
+
+ ddr->timing_cfg_1 = (ddr->timing_cfg_1 & 0xFFFF0FFF) |
+ (ddr_cs_conf[i].refresh & 0x0000F000);
+
+ return ddr_cs_conf[i].size;
+ }
+#endif /* CONFIG_TQM8548 */
+
+ /* return size if detected, else return 0 */
+ return (i < N_DDR_CS_CONF) ? ddr_cs_conf[i].size : 0;
+}
+
+void board_add_ram_info (int use_default)
+{
+ int casl;
+
+ if (use_default)
+ casl = CONFIG_DDR_DEFAULT_CL;
+ else
+ casl = cas_latency ();
+
+ puts (" (CL=");
+ switch (casl) {
+ case 20:
+ puts ("2)");
+ break;
+
+ case 25:
+ puts ("2.5)");
+ break;
+
+ case 30:
+ puts ("3)");
+ break;
+ }
+}
+
+long int initdram (int board_type)
+{
+ long dram_size = 0;
+ int casl;
+
+#if defined(CONFIG_DDR_DLL)
+ /*
+ * This DLL-Override only used on TQM8540 and TQM8560
+ */
+ {
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ int i, x;
+
+ x = 10;
+
+ /*
+ * Work around to stabilize DDR DLL
+ */
+ gur->ddrdllcr = 0x81000000;
+ asm ("sync; isync; msync");
+ udelay (200);
+ while (gur->ddrdllcr != 0x81000100) {
+ gur->devdisr = gur->devdisr | 0x00010000;
+ asm ("sync; isync; msync");
+ for (i = 0; i < x; i++)
+ ;
+ gur->devdisr = gur->devdisr & 0xfff7ffff;
+ asm ("sync; isync; msync");
+ x++;
+ }
+ }
+#endif
+
+ casl = cas_latency ();
+ dram_size = sdram_setup (casl);
+ if ((dram_size == 0) && (casl != CONFIG_DDR_DEFAULT_CL)) {
+ /*
+ * Try again with default CAS latency
+ */
+ puts ("Problem with CAS lantency");
+ board_add_ram_info (1);
+ puts (", using default CL!\n");
+ casl = CONFIG_DDR_DEFAULT_CL;
+ dram_size = sdram_setup (casl);
+ puts (" ");
+ }
+
+ return dram_size;
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+ uint *pstart = (uint *) CFG_MEMTEST_START;
+ uint *pend = (uint *) CFG_MEMTEST_END;
+ uint *p;
+
+ printf ("SDRAM test phase 1:\n");
+ for (p = pstart; p < pend; p++)
+ *p = 0xaaaaaaaa;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0xaaaaaaaa) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ printf ("SDRAM test phase 2:\n");
+ for (p = pstart; p < pend; p++)
+ *p = 0x55555555;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0x55555555) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ printf ("SDRAM test passed.\n");
+ return 0;
+}
+#endif
--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY (0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+ MAS3_SX | MAS3_SW | MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY (0, CFG_INIT_RAM_ADDR + 4 * 1024,
+ CFG_INIT_RAM_ADDR + 4 * 1024,
+ MAS3_SX | MAS3_SW | MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY (0, CFG_INIT_RAM_ADDR + 8 * 1024,
+ CFG_INIT_RAM_ADDR + 8 * 1024,
+ MAS3_SX | MAS3_SW | MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY (0, CFG_INIT_RAM_ADDR + 12 * 1024,
+ CFG_INIT_RAM_ADDR + 12 * 1024,
+ MAS3_SX | MAS3_SW | MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+
+#ifndef CONFIG_TQM_BIGFLASH
+ /*
+ * TLB 0, 1: 128M Non-cacheable, guarded
+ * 0xf8000000 128M FLASH
+ * Out of reset this entry is only 4K.
+ */
+ SET_TLB_ENTRY (1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+ MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+ 0, 1, BOOKE_PAGESZ_64M, 1),
+ SET_TLB_ENTRY (1, CFG_FLASH_BASE + 0x4000000,
+ CFG_FLASH_BASE + 0x4000000,
+ MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+ 0, 0, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLB 2: 256M Non-cacheable, guarded
+ * 0x80000000 256M PCI1 MEM First half
+ */
+ SET_TLB_ENTRY (1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+ MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+ 0, 2, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 3: 256M Non-cacheable, guarded
+ * 0x90000000 256M PCI1 MEM Second half
+ */
+ SET_TLB_ENTRY (1, CFG_PCI1_MEM_PHYS + 0x10000000,
+ CFG_PCI1_MEM_PHYS + 0x10000000,
+ MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+ 0, 3, BOOKE_PAGESZ_256M, 1),
+
+#ifdef CONFIG_PCIE1
+ /*
+ * TLB 4: 256M Non-cacheable, guarded
+ * 0xc0000000 256M PCI express MEM First half
+ */
+ SET_TLB_ENTRY (1, CFG_PCIE1_MEM_BASE, CFG_PCIE1_MEM_BASE,
+ MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+ 0, 4, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 5: 256M Non-cacheable, guarded
+ * 0xd0000000 256M PCI express MEM Second half
+ */
+ SET_TLB_ENTRY (1, CFG_PCIE1_MEM_BASE + 0x10000000,
+ CFG_PCIE1_MEM_BASE + 0x10000000,
+ MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+ 0, 5, BOOKE_PAGESZ_256M, 1),
+#else /* !CONFIG_PCIE */
+ /*
+ * TLB 4: 256M Non-cacheable, guarded
+ * 0xc0000000 256M Rapid IO MEM First half
+ */
+ SET_TLB_ENTRY (1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
+ MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+ 0, 4, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 5: 256M Non-cacheable, guarded
+ * 0xd0000000 256M Rapid IO MEM Second half
+ */
+ SET_TLB_ENTRY (1, CFG_RIO_MEM_BASE + 0x10000000,
+ CFG_RIO_MEM_BASE + 0x10000000,
+ MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+ 0, 5, BOOKE_PAGESZ_256M, 1),
+#endif /* CONFIG_PCIE */
+
+ /*
+ * TLB 6: 64M Non-cacheable, guarded
+ * 0xe0000000 1M CCSRBAR
+ * 0xe2000000 16M PCI1 IO
+ * 0xe3000000 16M CAN and NAND Flash
+ */
+ SET_TLB_ENTRY (1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+ MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+ 0, 6, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLB 7+8: 512M DDR, cache disabled (needed for memory test)
+ * 0x00000000 512M DDR System memory
+ * Without SPD EEPROM configured DDR, this must be setup manually.
+ * Make sure the TLB count at the top of this table is correct.
+ * Likely it needs to be increased by two for these entries.
+ */
+ SET_TLB_ENTRY (1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+ MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+ 0, 7, BOOKE_PAGESZ_256M, 1),
+
+ SET_TLB_ENTRY (1, CFG_DDR_SDRAM_BASE + 0x10000000,
+ CFG_DDR_SDRAM_BASE + 0x10000000,
+ MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+ 0, 8, BOOKE_PAGESZ_256M, 1),
+
+#ifdef CONFIG_PCIE1
+ /*
+ * TLB 9: 16M Non-cacheable, guarded
+ * 0xef000000 16M PCI express IO
+ */
+ SET_TLB_ENTRY (1, CFG_PCIE1_IO_BASE, CFG_PCIE1_IO_BASE,
+ MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+ 0, 9, BOOKE_PAGESZ_16M, 1),
+#endif /* CONFIG_PCIE */
+
+#else /* CONFIG_TQM_BIGFLASH */
+
+ /*
+ * TLB 0,1,2,3: 1G Non-cacheable, guarded
+ * 0xc0000000 1G FLASH
+ * Out of reset this entry is only 4K.
+ */
+ SET_TLB_ENTRY (1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+ MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+ 0, 3, BOOKE_PAGESZ_256M, 1),
+ SET_TLB_ENTRY (1, CFG_FLASH_BASE + 0x10000000,
+ CFG_FLASH_BASE + 0x10000000,
+ MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+ 0, 2, BOOKE_PAGESZ_256M, 1),
+ SET_TLB_ENTRY (1, CFG_FLASH_BASE + 0x20000000,
+ CFG_FLASH_BASE + 0x20000000,
+ MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+ 0, 1, BOOKE_PAGESZ_256M, 1),
+ SET_TLB_ENTRY (1, CFG_FLASH_BASE + 0x30000000,
+ CFG_FLASH_BASE + 0x30000000,
+ MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+ 0, 0, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 4: 256M Non-cacheable, guarded
+ * 0x80000000 256M PCI1 MEM First half
+ */
+ SET_TLB_ENTRY (1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+ MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+ 0, 4, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 5: 256M Non-cacheable, guarded
+ * 0x90000000 256M PCI1 MEM Second half
+ */
+ SET_TLB_ENTRY (1, CFG_PCI1_MEM_PHYS + 0x10000000,
+ CFG_PCI1_MEM_PHYS + 0x10000000,
+ MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+ 0, 5, BOOKE_PAGESZ_256M, 1),
+
+#ifdef CONFIG_PCIE1
+ /*
+ * TLB 6: 256M Non-cacheable, guarded
+ * 0xc0000000 256M PCI express MEM First half
+ */
+ SET_TLB_ENTRY (1, CFG_PCIE1_MEM_BASE, CFG_PCIE1_MEM_BASE,
+ MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+ 0, 6, BOOKE_PAGESZ_256M, 1),
+#else /* !CONFIG_PCIE */
+ /*
+ * TLB 6: 256M Non-cacheable, guarded
+ * 0xb0000000 256M Rapid IO MEM First half
+ */
+ SET_TLB_ENTRY (1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
+ MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+ 0, 6, BOOKE_PAGESZ_256M, 1),
+
+#endif /* CONFIG_PCIE */
+
+ /*
+ * TLB 7: 64M Non-cacheable, guarded
+ * 0xa0000000 1M CCSRBAR
+ * 0xa2000000 16M PCI1 IO
+ * 0xa3000000 16M CAN and NAND Flash
+ */
+ SET_TLB_ENTRY (1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+ MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+ 0, 7, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLB 8+9: 512M DDR, cache disabled (needed for memory test)
+ * 0x00000000 512M DDR System memory
+ * Without SPD EEPROM configured DDR, this must be setup manually.
+ * Make sure the TLB count at the top of this table is correct.
+ * Likely it needs to be increased by two for these entries.
+ */
+ SET_TLB_ENTRY (1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+ MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+ 0, 8, BOOKE_PAGESZ_256M, 1),
+
+ SET_TLB_ENTRY (1, CFG_DDR_SDRAM_BASE + 0x10000000,
+ CFG_DDR_SDRAM_BASE + 0x10000000,
+ MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+ 0, 9, BOOKE_PAGESZ_256M, 1),
+
+#ifdef CONFIG_PCIE1
+ /*
+ * TLB 10: 16M Non-cacheable, guarded
+ * 0xaf000000 16M PCI express IO
+ */
+ SET_TLB_ENTRY (1, CFG_PCIE1_IO_BASE, CFG_PCIE1_IO_BASE,
+ MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+ 0, 10, BOOKE_PAGESZ_16M, 1),
+#endif /* CONFIG_PCIE */
+
+#endif /* CONFIG_TQM_BIGFLASH */
+};
+
+int num_tlb_entries = ARRAY_SIZE (tlb_table);
--- /dev/null
+/*
+ * (C) Copyright 2008 Wolfgang Grandegger <wg@denx.de>
+ *
+ * (C) Copyright 2006
+ * Thomas Waehner, TQ-Systems GmbH, thomas.waehner@tqs.de.
+ *
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Copyright 2004 Freescale Semiconductor.
+ * (C) Copyright 2002,2003, Motorola Inc.
+ * Xianghua Xiao, (X.Xiao@motorola.com)
+ *
+ * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <asm/immap_fsl_pci.h>
+#include <asm/io.h>
+#include <ioports.h>
+#include <flash.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern flash_info_t flash_info[]; /* FLASH chips info */
+
+void local_bus_init (void);
+ulong flash_get_size (ulong base, int banknum);
+
+#ifdef CONFIG_PS2MULT
+void ps2mult_early_init (void);
+#endif
+
+#ifdef CONFIG_CPM2
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+
+const iop_conf_t iop_conf_tab[4][32] = {
+
+ /* Port A: conf, ppar, psor, pdir, podr, pdat */
+ {
+ {1, 1, 1, 0, 0, 0}, /* PA31: FCC1 MII COL */
+ {1, 1, 1, 0, 0, 0}, /* PA30: FCC1 MII CRS */
+ {1, 1, 1, 1, 0, 0}, /* PA29: FCC1 MII TX_ER */
+ {1, 1, 1, 1, 0, 0}, /* PA28: FCC1 MII TX_EN */
+ {1, 1, 1, 0, 0, 0}, /* PA27: FCC1 MII RX_DV */
+ {1, 1, 1, 0, 0, 0}, /* PA26: FCC1 MII RX_ER */
+ {0, 1, 0, 1, 0, 0}, /* PA25: FCC1 ATMTXD[0] */
+ {0, 1, 0, 1, 0, 0}, /* PA24: FCC1 ATMTXD[1] */
+ {0, 1, 0, 1, 0, 0}, /* PA23: FCC1 ATMTXD[2] */
+ {0, 1, 0, 1, 0, 0}, /* PA22: FCC1 ATMTXD[3] */
+ {1, 1, 0, 1, 0, 0}, /* PA21: FCC1 MII TxD[3] */
+ {1, 1, 0, 1, 0, 0}, /* PA20: FCC1 MII TxD[2] */
+ {1, 1, 0, 1, 0, 0}, /* PA19: FCC1 MII TxD[1] */
+ {1, 1, 0, 1, 0, 0}, /* PA18: FCC1 MII TxD[0] */
+ {1, 1, 0, 0, 0, 0}, /* PA17: FCC1 MII RxD[0] */
+ {1, 1, 0, 0, 0, 0}, /* PA16: FCC1 MII RxD[1] */
+ {1, 1, 0, 0, 0, 0}, /* PA15: FCC1 MII RxD[2] */
+ {1, 1, 0, 0, 0, 0}, /* PA14: FCC1 MII RxD[3] */
+ {0, 1, 0, 0, 0, 0}, /* PA13: FCC1 ATMRXD[3] */
+ {0, 1, 0, 0, 0, 0}, /* PA12: FCC1 ATMRXD[2] */
+ {0, 1, 0, 0, 0, 0}, /* PA11: FCC1 ATMRXD[1] */
+ {0, 1, 0, 0, 0, 0}, /* PA10: FCC1 ATMRXD[0] */
+ {0, 1, 1, 1, 0, 0}, /* PA9 : FCC1 L1TXD */
+ {0, 1, 1, 0, 0, 0}, /* PA8 : FCC1 L1RXD */
+ {0, 0, 0, 1, 0, 0}, /* PA7 : PA7 */
+ {0, 1, 1, 1, 0, 0}, /* PA6 : TDM A1 L1RSYNC */
+ {0, 0, 0, 1, 0, 0}, /* PA5 : PA5 */
+ {0, 0, 0, 1, 0, 0}, /* PA4 : PA4 */
+ {0, 0, 0, 1, 0, 0}, /* PA3 : PA3 */
+ {0, 0, 0, 1, 0, 0}, /* PA2 : PA2 */
+ {0, 0, 0, 0, 0, 0}, /* PA1 : FREERUN */
+ {0, 0, 0, 1, 0, 0} /* PA0 : PA0 */
+ },
+
+ /* Port B: conf, ppar, psor, pdir, podr, pdat */
+ {
+ {1, 1, 0, 1, 0, 0}, /* PB31: FCC2 MII TX_ER */
+ {1, 1, 0, 0, 0, 0}, /* PB30: FCC2 MII RX_DV */
+ {1, 1, 1, 1, 0, 0}, /* PB29: FCC2 MII TX_EN */
+ {1, 1, 0, 0, 0, 0}, /* PB28: FCC2 MII RX_ER */
+ {1, 1, 0, 0, 0, 0}, /* PB27: FCC2 MII COL */
+ {1, 1, 0, 0, 0, 0}, /* PB26: FCC2 MII CRS */
+ {1, 1, 0, 1, 0, 0}, /* PB25: FCC2 MII TxD[3] */
+ {1, 1, 0, 1, 0, 0}, /* PB24: FCC2 MII TxD[2] */
+ {1, 1, 0, 1, 0, 0}, /* PB23: FCC2 MII TxD[1] */
+ {1, 1, 0, 1, 0, 0}, /* PB22: FCC2 MII TxD[0] */
+ {1, 1, 0, 0, 0, 0}, /* PB21: FCC2 MII RxD[0] */
+ {1, 1, 0, 0, 0, 0}, /* PB20: FCC2 MII RxD[1] */
+ {1, 1, 0, 0, 0, 0}, /* PB19: FCC2 MII RxD[2] */
+ {1, 1, 0, 0, 0, 0}, /* PB18: FCC2 MII RxD[3] */
+ {1, 1, 0, 0, 0, 0}, /* PB17: FCC3:RX_DIV */
+ {1, 1, 0, 0, 0, 0}, /* PB16: FCC3:RX_ERR */
+ {1, 1, 0, 1, 0, 0}, /* PB15: FCC3:TX_ERR */
+ {1, 1, 0, 1, 0, 0}, /* PB14: FCC3:TX_EN */
+ {1, 1, 0, 0, 0, 0}, /* PB13: FCC3:COL */
+ {1, 1, 0, 0, 0, 0}, /* PB12: FCC3:CRS */
+ {1, 1, 0, 0, 0, 0}, /* PB11: FCC3:RXD */
+ {1, 1, 0, 0, 0, 0}, /* PB10: FCC3:RXD */
+ {1, 1, 0, 0, 0, 0}, /* PB9 : FCC3:RXD */
+ {1, 1, 0, 0, 0, 0}, /* PB8 : FCC3:RXD */
+ {1, 1, 0, 1, 0, 0}, /* PB7 : FCC3:TXD */
+ {1, 1, 0, 1, 0, 0}, /* PB6 : FCC3:TXD */
+ {1, 1, 0, 1, 0, 0}, /* PB5 : FCC3:TXD */
+ {1, 1, 0, 1, 0, 0}, /* PB4 : FCC3:TXD */
+ {0, 0, 0, 0, 0, 0}, /* PB3 : pin doesn't exist */
+ {0, 0, 0, 0, 0, 0}, /* PB2 : pin doesn't exist */
+ {0, 0, 0, 0, 0, 0}, /* PB1 : pin doesn't exist */
+ {0, 0, 0, 0, 0, 0} /* PB0 : pin doesn't exist */
+ },
+
+ /* Port C: conf, ppar, psor, pdir, podr, pdat */
+ {
+ {0, 0, 0, 1, 0, 0}, /* PC31: PC31 */
+ {0, 0, 0, 1, 0, 0}, /* PC30: PC30 */
+ {0, 1, 1, 0, 0, 0}, /* PC29: SCC1 EN *CLSN */
+ {0, 0, 0, 1, 0, 0}, /* PC28: PC28 */
+ {0, 0, 0, 1, 0, 0}, /* PC27: UART Clock in */
+ {0, 0, 0, 1, 0, 0}, /* PC26: PC26 */
+ {0, 0, 0, 1, 0, 0}, /* PC25: PC25 */
+ {0, 0, 0, 1, 0, 0}, /* PC24: PC24 */
+ {0, 1, 0, 1, 0, 0}, /* PC23: ATMTFCLK */
+ {0, 1, 0, 0, 0, 0}, /* PC22: ATMRFCLK */
+ {1, 1, 0, 0, 0, 0}, /* PC21: SCC1 EN RXCLK */
+ {1, 1, 0, 0, 0, 0}, /* PC20: SCC1 EN TXCLK */
+ {1, 1, 0, 0, 0, 0}, /* PC19: FCC2 MII RX_CLK CLK13 */
+ {1, 1, 0, 0, 0, 0}, /* PC18: FCC Tx Clock (CLK14) */
+ {1, 1, 0, 0, 0, 0}, /* PC17: PC17 */
+ {1, 1, 0, 0, 0, 0}, /* PC16: FCC Tx Clock (CLK16) */
+ {0, 1, 0, 0, 0, 0}, /* PC15: PC15 */
+ {0, 1, 0, 0, 0, 0}, /* PC14: SCC1 EN *CD */
+ {0, 1, 0, 0, 0, 0}, /* PC13: PC13 */
+ {0, 1, 0, 1, 0, 0}, /* PC12: PC12 */
+ {0, 0, 0, 1, 0, 0}, /* PC11: LXT971 transmit control */
+ {0, 0, 0, 1, 0, 0}, /* PC10: FETHMDC */
+ {0, 0, 0, 0, 0, 0}, /* PC9 : FETHMDIO */
+ {0, 0, 0, 1, 0, 0}, /* PC8 : PC8 */
+ {0, 0, 0, 1, 0, 0}, /* PC7 : PC7 */
+ {0, 0, 0, 1, 0, 0}, /* PC6 : PC6 */
+ {0, 0, 0, 1, 0, 0}, /* PC5 : PC5 */
+ {0, 0, 0, 1, 0, 0}, /* PC4 : PC4 */
+ {0, 0, 0, 1, 0, 0}, /* PC3 : PC3 */
+ {0, 0, 0, 1, 0, 1}, /* PC2 : ENET FDE */
+ {0, 0, 0, 1, 0, 0}, /* PC1 : ENET DSQE */
+ {0, 0, 0, 1, 0, 0}, /* PC0 : ENET LBK */
+ },
+
+ /* Port D: conf, ppar, psor, pdir, podr, pdat */
+ {
+#ifdef CONFIG_TQM8560
+ {1, 1, 0, 0, 0, 0}, /* PD31: SCC1 EN RxD */
+ {1, 1, 1, 1, 0, 0}, /* PD30: SCC1 EN TxD */
+ {1, 1, 0, 1, 0, 0}, /* PD29: SCC1 EN TENA */
+#else /* !CONFIG_TQM8560 */
+ {0, 0, 0, 0, 0, 0}, /* PD31: PD31 */
+ {0, 0, 0, 0, 0, 0}, /* PD30: PD30 */
+ {0, 0, 0, 0, 0, 0}, /* PD29: PD29 */
+#endif /* CONFIG_TQM8560 */
+ {1, 1, 0, 0, 0, 0}, /* PD28: PD28 */
+ {1, 1, 0, 1, 0, 0}, /* PD27: PD27 */
+ {1, 1, 0, 1, 0, 0}, /* PD26: PD26 */
+ {0, 0, 0, 1, 0, 0}, /* PD25: PD25 */
+ {0, 0, 0, 1, 0, 0}, /* PD24: PD24 */
+ {0, 0, 0, 1, 0, 0}, /* PD23: PD23 */
+ {0, 0, 0, 1, 0, 0}, /* PD22: PD22 */
+ {0, 0, 0, 1, 0, 0}, /* PD21: PD21 */
+ {0, 0, 0, 1, 0, 0}, /* PD20: PD20 */
+ {0, 0, 0, 1, 0, 0}, /* PD19: PD19 */
+ {0, 0, 0, 1, 0, 0}, /* PD18: PD18 */
+ {0, 1, 0, 0, 0, 0}, /* PD17: FCC1 ATMRXPRTY */
+ {0, 1, 0, 1, 0, 0}, /* PD16: FCC1 ATMTXPRTY */
+ {0, 1, 1, 0, 1, 0}, /* PD15: I2C SDA */
+ {0, 0, 0, 1, 0, 0}, /* PD14: LED */
+ {0, 0, 0, 0, 0, 0}, /* PD13: PD13 */
+ {0, 0, 0, 0, 0, 0}, /* PD12: PD12 */
+ {0, 0, 0, 0, 0, 0}, /* PD11: PD11 */
+ {0, 0, 0, 0, 0, 0}, /* PD10: PD10 */
+ {0, 1, 0, 1, 0, 0}, /* PD9 : SMC1 TXD */
+ {0, 1, 0, 0, 0, 0}, /* PD8 : SMC1 RXD */
+ {0, 0, 0, 1, 0, 1}, /* PD7 : PD7 */
+ {0, 0, 0, 1, 0, 1}, /* PD6 : PD6 */
+ {0, 0, 0, 1, 0, 1}, /* PD5 : PD5 */
+ {0, 0, 0, 1, 0, 1}, /* PD4 : PD4 */
+ {0, 0, 0, 0, 0, 0}, /* PD3 : pin doesn't exist */
+ {0, 0, 0, 0, 0, 0}, /* PD2 : pin doesn't exist */
+ {0, 0, 0, 0, 0, 0}, /* PD1 : pin doesn't exist */
+ {0, 0, 0, 0, 0, 0} /* PD0 : pin doesn't exist */
+ }
+};
+#endif /* CONFIG_CPM2 */
+
+#define CASL_STRING1 "casl=xx"
+#define CASL_STRING2 "casl="
+
+static const int casl_table[] = { 20, 25, 30 };
+#define N_CASL (sizeof(casl_table) / sizeof(casl_table[0]))
+
+int cas_latency (void)
+{
+ char *s = getenv ("serial#");
+ int casl;
+ int val;
+ int i;
+
+ casl = CONFIG_DDR_DEFAULT_CL;
+
+ if (s != NULL) {
+ if (strncmp(s + strlen (s) - strlen (CASL_STRING1),
+ CASL_STRING2, strlen (CASL_STRING2)) == 0) {
+ val = simple_strtoul (s + strlen (s) - 2, NULL, 10);
+
+ for (i = 0; i < N_CASL; ++i) {
+ if (val == casl_table[i]) {
+ return val;
+ }
+ }
+ }
+ }
+
+ return casl;
+}
+
+int checkboard (void)
+{
+ char *s = getenv ("serial#");
+
+ printf ("Board: %s", CONFIG_BOARDNAME);
+ if (s != NULL) {
+ puts (", serial# ");
+ puts (s);
+ }
+ putc ('\n');
+
+ /*
+ * Initialize local bus.
+ */
+ local_bus_init ();
+
+ return 0;
+}
+
+int misc_init_r (void)
+{
+ volatile ccsr_lbc_t *memctl = (void *)(CFG_MPC85xx_LBC_ADDR);
+
+ /*
+ * Adjust flash start and offset to detected values
+ */
+ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
+ gd->bd->bi_flashoffset = 0;
+
+ /*
+ * Recalculate CS configuration if second FLASH bank is available
+ */
+ if (flash_info[0].size > 0) {
+ memctl->or1 = ((-flash_info[0].size) & 0xffff8000) |
+ (CFG_OR1_PRELIM & 0x00007fff);
+ memctl->br1 = gd->bd->bi_flashstart |
+ (CFG_BR1_PRELIM & 0x00007fff);
+ /*
+ * Re-check to get correct base address for bank 1
+ */
+ flash_get_size (gd->bd->bi_flashstart, 0);
+ } else {
+ memctl->or1 = 0;
+ memctl->br1 = 0;
+ }
+
+ /*
+ * If bank 1 is equipped, bank 0 is mapped after bank 1
+ */
+ memctl->or0 = ((-flash_info[1].size) & 0xffff8000) |
+ (CFG_OR0_PRELIM & 0x00007fff);
+ memctl->br0 = (gd->bd->bi_flashstart + flash_info[0].size) |
+ (CFG_BR0_PRELIM & 0x00007fff);
+ /*
+ * Re-check to get correct base address for bank 0
+ */
+ flash_get_size (gd->bd->bi_flashstart + flash_info[0].size, 1);
+
+ /*
+ * Re-do flash protection upon new addresses
+ */
+ flash_protect (FLAG_PROTECT_CLEAR,
+ gd->bd->bi_flashstart, 0xffffffff,
+ &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+
+ /* Monitor protection ON by default */
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + monitor_flash_len - 1,
+ &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+
+ /* Environment protection ON by default */
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+
+#ifdef CFG_ENV_ADDR_REDUND
+ /* Redundant environment protection ON by default */
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
+ &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+#endif
+
+ return 0;
+}
+
+#ifdef CONFIG_CAN_DRIVER
+/*
+ * Initialize UPMC RAM
+ */
+static void upmc_write (u_char addr, uint val)
+{
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+
+ out_be32 (&lbc->mdr, val);
+
+ clrsetbits_be32(&lbc->mcmr, MxMR_MAD_MSK,
+ MxMR_OP_WARR | (addr & MxMR_MAD_MSK));
+
+ /* dummy access to perform write */
+ out_8 ((void __iomem *)CFG_CAN_BASE, 0);
+
+ /* normal operation */
+ clrbits_be32(&lbc->mcmr, MxMR_OP_WARR);
+}
+#endif /* CONFIG_CAN_DRIVER */
+
+uint get_lbc_clock (void)
+{
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+ sys_info_t sys_info;
+ ulong clkdiv = lbc->lcrr & 0x0f;
+
+ get_sys_info (&sys_info);
+
+ if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) {
+#ifdef CONFIG_MPC8548
+ /*
+ * Yes, the entire PQ38 family use the same
+ * bit-representation for twice the clock divider value.
+ */
+ clkdiv *= 2;
+#endif
+ return sys_info.freqSystemBus / clkdiv;
+ }
+
+ puts("Invalid clock divider value in CFG_LBC_LCRR\n");
+
+ return 0;
+}
+
+/*
+ * Initialize Local Bus
+ */
+void local_bus_init (void)
+{
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+ uint lbc_mhz = get_lbc_clock () / 1000000;
+
+#ifdef CONFIG_MPC8548
+ uint svr = get_svr ();
+ uint lcrr;
+
+ /*
+ * MPC revision < 2.0
+ * According to MPC8548E_Device_Errata Rev. L, Erratum LBIU1:
+ * Modify engineering use only register at address 0xE_0F20.
+ * "1. Read register at offset 0xE_0F20
+ * 2. And value with 0x0000_FFFF
+ * 3. OR result with 0x0000_0004
+ * 4. Write result back to offset 0xE_0F20."
+ *
+ * According to MPC8548E_Device_Errata Rev. L, Erratum LBIU2:
+ * Modify engineering use only register at address 0xE_0F20.
+ * "1. Read register at offset 0xE_0F20
+ * 2. And value with 0xFFFF_FFDF
+ * 3. Write result back to offset 0xE_0F20."
+ *
+ * Since it is the same register, we do the modification in one step.
+ */
+ if (SVR_MAJ (svr) < 2) {
+ uint dummy = gur->lbiuiplldcr1;
+ dummy &= 0x0000FFDF;
+ dummy |= 0x00000004;
+ gur->lbiuiplldcr1 = dummy;
+ }
+
+ lcrr = CFG_LBC_LCRR;
+
+ /*
+ * Local Bus Clock > 83.3 MHz. According to timing
+ * specifications set LCRR[EADC] to 2 delay cycles.
+ */
+ if (lbc_mhz > 83) {
+ lcrr &= ~LCRR_EADC;
+ lcrr |= LCRR_EADC_2;
+ }
+
+ /*
+ * According to MPC8548ERMAD Rev. 1.3, 13.3.1.16, 13-30
+ * disable PLL bypass for Local Bus Clock > 83 MHz.
+ */
+ if (lbc_mhz >= 66)
+ lcrr &= (~LCRR_DBYP); /* DLL Enabled */
+
+ else
+ lcrr |= LCRR_DBYP; /* DLL Bypass */
+
+ lbc->lcrr = lcrr;
+ asm ("sync;isync;msync");
+
+ /*
+ * According to MPC8548ERMAD Rev.1.3 read back LCRR
+ * and terminate with isync
+ */
+ lcrr = lbc->lcrr;
+ asm ("isync;");
+
+ /* let DLL stabilize */
+ udelay (500);
+
+#else /* !CONFIG_MPC8548 */
+
+ /*
+ * Errata LBC11.
+ * Fix Local Bus clock glitch when DLL is enabled.
+ *
+ * If localbus freq is < 66Mhz, DLL bypass mode must be used.
+ * If localbus freq is > 133Mhz, DLL can be safely enabled.
+ * Between 66 and 133, the DLL is enabled with an override workaround.
+ */
+
+ if (lbc_mhz < 66) {
+ lbc->lcrr = CFG_LBC_LCRR | LCRR_DBYP; /* DLL Bypass */
+ lbc->ltedr = 0xa4c80000; /* DK: !!! */
+
+ } else if (lbc_mhz >= 133) {
+ lbc->lcrr = CFG_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */
+
+ } else {
+ /*
+ * On REV1 boards, need to change CLKDIV before enable DLL.
+ * Default CLKDIV is 8, change it to 4 temporarily.
+ */
+ uint pvr = get_pvr ();
+ uint temp_lbcdll = 0;
+
+ if (pvr == PVR_85xx_REV1) {
+ /* FIXME: Justify the high bit here. */
+ lbc->lcrr = 0x10000004;
+ }
+
+ lbc->lcrr = CFG_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */
+ udelay (200);
+
+ /*
+ * Sample LBC DLL ctrl reg, upshift it to set the
+ * override bits.
+ */
+ temp_lbcdll = gur->lbcdllcr;
+ gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
+ asm ("sync;isync;msync");
+ }
+#endif /* !CONFIG_MPC8548 */
+
+#ifdef CONFIG_CAN_DRIVER
+ /*
+ * According to timing specifications EAD must be
+ * set if Local Bus Clock is > 83 MHz.
+ */
+ if (lbc_mhz > 83)
+ out_be32 (&lbc->or2, CFG_OR2_CAN | OR_UPM_EAD);
+ else
+ out_be32 (&lbc->or2, CFG_OR2_CAN);
+ out_be32 (&lbc->br2, CFG_BR2_CAN);
+
+ /* LGPL4 is UPWAIT */
+ out_be32(&lbc->mcmr, MxMR_DSx_3_CYCL | MxMR_GPL_x4DIS | MxMR_WLFx_3X);
+
+ /* Initialize UPMC for CAN: single read */
+ upmc_write (0x00, 0xFFFFED00);
+ upmc_write (0x01, 0xCCFFCC00);
+ upmc_write (0x02, 0x00FFCF00);
+ upmc_write (0x03, 0x00FFCF00);
+ upmc_write (0x04, 0x00FFDC00);
+ upmc_write (0x05, 0x00FFCF00);
+ upmc_write (0x06, 0x00FFED00);
+ upmc_write (0x07, 0x3FFFCC07);
+
+ /* Initialize UPMC for CAN: single write */
+ upmc_write (0x18, 0xFFFFED00);
+ upmc_write (0x19, 0xCCFFEC00);
+ upmc_write (0x1A, 0x00FFED80);
+ upmc_write (0x1B, 0x00FFED80);
+ upmc_write (0x1C, 0x00FFFC00);
+ upmc_write (0x1D, 0x0FFFEC00);
+ upmc_write (0x1E, 0x0FFFEF00);
+ upmc_write (0x1F, 0x3FFFEC05);
+#endif /* CONFIG_CAN_DRIVER */
+}
+
+/*
+ * Initialize PCI Devices, report devices found.
+ */
+static int first_free_busno;
+
+#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
+static struct pci_controller pci1_hose;
+#endif /* CONFIG_PCI || CONFIG_PCI1 */
+
+#ifdef CONFIG_PCIE1
+static struct pci_controller pcie1_hose;
+#endif /* CONFIG_PCIE1 */
+
+static inline void init_pci1(void)
+{
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
+ uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)CFG_PCI1_ADDR;
+ extern void fsl_pci_init(struct pci_controller *hose);
+ struct pci_controller *hose = &pci1_hose;
+
+ /* PORDEVSR[15] */
+ uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;
+ /* PORDEVSR[14] */
+ uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
+ /* PORPLLSR[16] */
+ uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
+
+ uint pci_agent = (host_agent == 3) || (host_agent == 4 ) ||
+ (host_agent == 6);
+
+ uint pci_speed = CONFIG_SYS_CLK_FREQ; /* PCI PSPEED in [4:5] */
+
+ if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) {
+ printf ("PCI1: %d bit, %s MHz, %s, %s, %s\n",
+ (pci_32) ? 32 : 64,
+ (pci_speed == 33333333) ? "33" :
+ (pci_speed == 66666666) ? "66" : "unknown",
+ pci_clk_sel ? "sync" : "async",
+ pci_agent ? "agent" : "host",
+ pci_arb ? "arbiter" : "external-arbiter");
+
+
+ /* inbound */
+ pci_set_region (hose->regions + 0,
+ CFG_PCI_MEMORY_BUS,
+ CFG_PCI_MEMORY_PHYS,
+ CFG_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+
+ /* outbound memory */
+ pci_set_region (hose->regions + 1,
+ CFG_PCI1_MEM_BASE,
+ CFG_PCI1_MEM_PHYS,
+ CFG_PCI1_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region (hose->regions + 2,
+ CFG_PCI1_IO_BASE,
+ CFG_PCI1_IO_PHYS,
+ CFG_PCI1_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 3;
+
+ hose->first_busno = first_free_busno;
+ pci_setup_indirect (hose, (int)&pci->cfg_addr,
+ (int)&pci->cfg_data);
+
+ fsl_pci_init (hose);
+
+ printf (" PCI on bus %02x..%02x\n",
+ hose->first_busno, hose->last_busno);
+
+ first_free_busno = hose->last_busno + 1;
+#ifdef CONFIG_PCIX_CHECK
+ if (!(gur->pordevsr & PORDEVSR_PCI)) {
+ ushort reg16 =
+ PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ |
+ PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
+ uint dev = PCI_BDF(hose->first_busno, 0, 0);
+
+ /* PCI-X init */
+ if (CONFIG_SYS_CLK_FREQ < 66000000)
+ puts ("PCI-X will only work at 66 MHz\n");
+
+ pci_hose_write_config_word (hose, dev, PCIX_COMMAND,
+ reg16);
+ }
+#endif
+ } else {
+ puts ("PCI1: disabled\n");
+ }
+#else /* !(CONFIG_PCI || CONFIG_PCI1) */
+ gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
+#endif /* CONFIG_PCI || CONFIG_PCI1) */
+}
+
+static inline void init_pcie1(void)
+{
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+#ifdef CONFIG_PCIE1
+ uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+ uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)CFG_PCIE1_ADDR;
+ extern void fsl_pci_init(struct pci_controller *hose);
+ struct pci_controller *hose = &pcie1_hose;
+ int pcie_ep = (host_agent == 0) || (host_agent == 2 ) ||
+ (host_agent == 3);
+
+ int pcie_configured = io_sel >= 1;
+
+ if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
+ printf ("PCIe: %s, base address %x",
+ pcie_ep ? "End point" : "Root complex", (uint)pci);
+
+ if (pci->pme_msg_det) {
+ pci->pme_msg_det = 0xffffffff;
+ debug (", with errors. Clearing. Now 0x%08x",
+ pci->pme_msg_det);
+ }
+ puts ("\n");
+
+ /* inbound */
+ pci_set_region (hose->regions + 0,
+ CFG_PCI_MEMORY_BUS,
+ CFG_PCI_MEMORY_PHYS,
+ CFG_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* outbound memory */
+ pci_set_region (hose->regions + 1,
+ CFG_PCIE1_MEM_BASE,
+ CFG_PCIE1_MEM_PHYS,
+ CFG_PCIE1_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region (hose->regions + 2,
+ CFG_PCIE1_IO_BASE,
+ CFG_PCIE1_IO_PHYS,
+ CFG_PCIE1_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 3;
+
+ hose->first_busno = first_free_busno;
+ pci_setup_indirect(hose, (int)&pci->cfg_addr,
+ (int)&pci->cfg_data);
+
+ fsl_pci_init (hose);
+ printf (" PCIe on bus %02x..%02x\n",
+ hose->first_busno, hose->last_busno);
+
+ first_free_busno = hose->last_busno + 1;
+
+ } else {
+ printf ("PCIe: disabled\n");
+ }
+#else /* !CONFIG_PCIE1 */
+ gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+#endif /* CONFIG_PCIE1 */
+}
+
+void pci_init_board (void)
+{
+ init_pci1();
+ init_pcie1();
+}
+
+#ifdef CONFIG_OF_BOARD_SETUP
+void ft_board_setup (void *blob, bd_t *bd)
+{
+ int node, tmp[2];
+ const char *path;
+
+ ft_cpu_setup (blob, bd);
+
+ node = fdt_path_offset (blob, "/aliases");
+ tmp[0] = 0;
+ if (node >= 0) {
+#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
+ path = fdt_getprop (blob, node, "pci0", NULL);
+ if (path) {
+ tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
+ do_fixup_by_path (blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif /* CONFIG_PCI || CONFIG_PCI1 */
+#ifdef CONFIG_PCIE1
+ path = fdt_getprop (blob, node, "pci1", NULL);
+ if (path) {
+ tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
+ do_fixup_by_path (blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif /* CONFIG_PCIE1 */
+ }
+}
+#endif /* CONFIG_OF_BOARD_SETUP */
+
+#ifdef CONFIG_BOARD_EARLY_INIT_R
+int board_early_init_r (void)
+{
+#ifdef CONFIG_PS2MULT
+ ps2mult_early_init ();
+#endif /* CONFIG_PS2MULT */
+ return (0);
+}
+#endif /* CONFIG_BOARD_EARLY_INIT_R */
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000 0x7fff_ffff DDR 2G
- * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
- * 0xc000_0000 0xdfff_ffff RapidIO 512M
- * 0xe000_0000 0xe000_ffff CCSR 1M
- * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
- * 0xf800_0000 0xf80f_ffff BCSR 1M
- * 0xfe00_0000 0xffff_ffff FLASH (boot bank) 32M
- *
- * Notes:
- * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- * If flash is 8M at default position (last 8M), no LAW needed.
- */
-
-struct law_entry law_table[] = {
- SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
- SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
- SET_LAW_ENTRY(3, CFG_LBC_FLASH_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
- SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
- SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
+++ /dev/null
-/*
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-
-struct sdram_conf_s {
- unsigned long size;
- unsigned long reg;
-};
-
-typedef struct sdram_conf_s sdram_conf_t;
-
-sdram_conf_t ddr_cs_conf[] = {
- {(512 << 20), 0x80000202}, /* 512MB, 14x10(4) */
- {(256 << 20), 0x80000102}, /* 256MB, 13x10(4) */
- {(128 << 20), 0x80000101}, /* 128MB, 13x9(4) */
- {(64 << 20), 0x80000001}, /* 64MB, 12x9(4) */
-};
-
-#define N_DDR_CS_CONF (sizeof(ddr_cs_conf) / sizeof(ddr_cs_conf[0]))
-
-int cas_latency(void);
-
-/*
- * Autodetect onboard DDR SDRAM on 85xx platforms
- *
- * NOTE: Some of the hardcoded values are hardware dependant,
- * so this should be extended for other future boards
- * using this routine!
- */
-long int sdram_setup(int casl)
-{
- int i;
- volatile ccsr_ddr_t *ddr = (void *)(CFG_MPC85xx_DDR_ADDR);
- unsigned long cfg_ddr_timing1;
- unsigned long cfg_ddr_mode;
-
- /*
- * Disable memory controller.
- */
- ddr->cs0_config = 0;
- ddr->sdram_cfg = 0;
-
- switch (casl) {
- case 20:
- cfg_ddr_timing1 = 0x47405331 | (3 << 16);
- cfg_ddr_mode = 0x40020002 | (2 << 4);
- break;
-
- case 25:
- cfg_ddr_timing1 = 0x47405331 | (4 << 16);
- cfg_ddr_mode = 0x40020002 | (6 << 4);
- break;
-
- case 30:
- default:
- cfg_ddr_timing1 = 0x47405331 | (5 << 16);
- cfg_ddr_mode = 0x40020002 | (3 << 4);
- break;
- }
-
- ddr->cs0_bnds = (ddr_cs_conf[0].size - 1) >> 24;
- ddr->cs0_config = ddr_cs_conf[0].reg;
- ddr->timing_cfg_1 = cfg_ddr_timing1;
- ddr->timing_cfg_2 = 0x00000800; /* P9-45,may need tuning */
- ddr->sdram_mode = cfg_ddr_mode;
- ddr->sdram_interval = 0x05160100; /* autocharge,no open page */
- ddr->err_disable = 0x0000000D;
-
- asm ("sync;isync;msync");
- udelay(1000);
-
- ddr->sdram_cfg = 0xc2000000; /* unbuffered,no DYN_PWR */
- asm ("sync; isync; msync");
- udelay(1000);
-
- for (i=0; i<N_DDR_CS_CONF; i++) {
- ddr->cs0_config = ddr_cs_conf[i].reg;
-
- if (get_ram_size(0, ddr_cs_conf[i].size) == ddr_cs_conf[i].size) {
- /*
- * OK, size detected -> all done
- */
- return ddr_cs_conf[i].size;
- }
- }
-
- return 0; /* nothing found ! */
-}
-
-void board_add_ram_info(int use_default)
-{
- int casl;
-
- if (use_default)
- casl = CONFIG_DDR_DEFAULT_CL;
- else
- casl = cas_latency();
-
- puts(" (CL=");
- switch (casl) {
- case 20:
- puts("2)");
- break;
-
- case 25:
- puts("2.5)");
- break;
-
- case 30:
- puts("3)");
- break;
- }
-}
-
-long int initdram (int board_type)
-{
- long dram_size = 0;
- int casl;
-
-#if defined(CONFIG_DDR_DLL)
- /*
- * This DLL-Override only used on TQM8540 and TQM8560
- */
- {
- volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
- int i,x;
-
- x = 10;
-
- /*
- * Work around to stabilize DDR DLL
- */
- gur->ddrdllcr = 0x81000000;
- asm("sync;isync;msync");
- udelay (200);
- while (gur->ddrdllcr != 0x81000100) {
- gur->devdisr = gur->devdisr | 0x00010000;
- asm("sync;isync;msync");
- for (i=0; i<x; i++)
- ;
- gur->devdisr = gur->devdisr & 0xfff7ffff;
- asm("sync;isync;msync");
- x++;
- }
- }
-#endif
-
- casl = cas_latency();
- dram_size = sdram_setup(casl);
- if ((dram_size == 0) && (casl != CONFIG_DDR_DEFAULT_CL)) {
- /*
- * Try again with default CAS latency
- */
- puts("Problem with CAS lantency");
- board_add_ram_info(1);
- puts(", using default CL!\n");
- casl = CONFIG_DDR_DEFAULT_CL;
- dram_size = sdram_setup(casl);
- puts(" ");
- }
-
- return dram_size;
-}
-
-#if defined(CFG_DRAM_TEST)
-int testdram (void)
-{
- uint *pstart = (uint *) CFG_MEMTEST_START;
- uint *pend = (uint *) CFG_MEMTEST_END;
- uint *p;
-
- printf ("SDRAM test phase 1:\n");
- for (p = pstart; p < pend; p++)
- *p = 0xaaaaaaaa;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0xaaaaaaaa) {
- printf ("SDRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf ("SDRAM test phase 2:\n");
- for (p = pstart; p < pend; p++)
- *p = 0x55555555;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0x55555555) {
- printf ("SDRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf ("SDRAM test passed.\n");
- return 0;
-}
-#endif
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
- /* TLB 0 - for temp stack in cache */
- SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
-
-
- /*
- * TLB 0, 1: 128M Non-cacheable, guarded
- * 0xf8000000 128M FLASH
- * Out of reset this entry is only 4K.
- */
- SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 1, BOOKE_PAGESZ_64M, 1),
- SET_TLB_ENTRY(1, CFG_FLASH_BASE + 0x4000000, CFG_FLASH_BASE + 0x4000000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 0, BOOKE_PAGESZ_64M, 1),
-
- /*
- * TLB 2: 256M Non-cacheable, guarded
- * 0x80000000 256M PCI1 MEM First half
- */
- SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 2, BOOKE_PAGESZ_256M, 1),
-
- /*
- * TLB 3: 256M Non-cacheable, guarded
- * 0x90000000 256M PCI1 MEM Second half
- */
- SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 3, BOOKE_PAGESZ_256M, 1),
-
- /*
- * TLB 4: 256M Non-cacheable, guarded
- * 0xc0000000 256M Rapid IO MEM First half
- */
- SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 4, BOOKE_PAGESZ_256M, 1),
-
- /*
- * TLB 5: 256M Non-cacheable, guarded
- * 0xd0000000 256M Rapid IO MEM Second half
- */
- SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 5, BOOKE_PAGESZ_256M, 1),
-
- /*
- * TLB 6: 64M Non-cacheable, guarded
- * 0xe000_0000 1M CCSRBAR
- * 0xe200_0000 16M PCI1 IO
- */
- SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 6, BOOKE_PAGESZ_64M, 1),
-
- /*
- * TLB 7+8: 512M DDR, cache disabled (needed for memory test)
- * 0x00000000 512M DDR System memory
- * Without SPD EEPROM configured DDR, this must be setup manually.
- * Make sure the TLB count at the top of this table is correct.
- * Likely it needs to be increased by two for these entries.
- */
- SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 7, BOOKE_PAGESZ_256M, 1),
-
- SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE + 0x10000000, CFG_DDR_SDRAM_BASE + 0x10000000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 8, BOOKE_PAGESZ_256M, 1),
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);
+++ /dev/null
-/*
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * Copyright 2004 Freescale Semiconductor.
- * (C) Copyright 2002,2003, Motorola Inc.
- * Xianghua Xiao, (X.Xiao@motorola.com)
- *
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <ioports.h>
-#include <flash.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern flash_info_t flash_info[]; /* FLASH chips info */
-
-void local_bus_init (void);
-ulong flash_get_size (ulong base, int banknum);
-
-#ifdef CONFIG_PS2MULT
-void ps2mult_early_init(void);
-#endif
-
-#ifdef CONFIG_CPM2
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
- /* Port A configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PA31 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII COL */
- /* PA30 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII CRS */
- /* PA29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_ER */
- /* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_EN */
- /* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_DV */
- /* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_ER */
- /* PA25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */
- /* PA24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */
- /* PA23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */
- /* PA22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */
- /* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[3] */
- /* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[2] */
- /* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[1] */
- /* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[0] */
- /* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[0] */
- /* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[1] */
- /* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[2] */
- /* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[3] */
- /* PA13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */
- /* PA12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */
- /* PA11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */
- /* PA10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */
- /* PA9 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 L1TXD */
- /* PA8 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 L1RXD */
- /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */
- /* PA6 */ { 0, 1, 1, 1, 0, 0 }, /* TDM A1 L1RSYNC */
- /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */
- /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */
- /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */
- /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */
- /* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* FREERUN */
- /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */
- },
-
- /* Port B configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
- /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
- /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
- /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
- /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
- /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
- /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
- /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
- /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
- /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
- /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
- /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
- /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
- /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
- /* PB17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */
- /* PB16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */
- /* PB15 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */
- /* PB14 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */
- /* PB13 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:COL */
- /* PB12 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:CRS */
- /* PB11 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
- /* PB10 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
- /* PB9 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
- /* PB8 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
- /* PB7 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
- /* PB6 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
- /* PB5 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
- /* PB4 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
- /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
- },
-
- /* Port C */
- { /* conf ppar psor pdir podr pdat */
- /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */
- /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */
- /* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */
- /* PC28 */ { 0, 0, 0, 1, 0, 0 }, /* PC28 */
- /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* UART Clock in */
- /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */
- /* PC25 */ { 0, 0, 0, 1, 0, 0 }, /* PC25 */
- /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */
- /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */
- /* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */
- /* PC21 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */
- /* PC20 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */
- /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK CLK13 */
- /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK14) */
- /* PC17 */ { 1, 1, 0, 0, 0, 0 }, /* PC17 */
- /* PC16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK16) */
- /* PC15 */ { 0, 1, 0, 0, 0, 0 }, /* PC15 */
- /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */
- /* PC13 */ { 0, 1, 0, 0, 0, 0 }, /* PC13 */
- /* PC12 */ { 0, 1, 0, 1, 0, 0 }, /* PC12 */
- /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* LXT971 transmit control */
- /* PC10 */ { 0, 0, 0, 1, 0, 0 }, /* FETHMDC */
- /* PC9 */ { 0, 0, 0, 0, 0, 0 }, /* FETHMDIO */
- /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */
- /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */
- /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */
- /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */
- /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */
- /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */
- /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */
- /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */
- /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */
- },
-
- /* Port D */
- { /* conf ppar psor pdir podr pdat */
- /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
- /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
- /* PD29 */ { 1, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */
- /* PD28 */ { 1, 1, 0, 0, 0, 0 }, /* PD28 */
- /* PD27 */ { 1, 1, 0, 1, 0, 0 }, /* PD27 */
- /* PD26 */ { 1, 1, 0, 1, 0, 0 }, /* PD26 */
- /* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */
- /* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */
- /* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */
- /* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */
- /* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */
- /* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */
- /* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */
- /* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */
- /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */
- /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */
- /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SDA */
- /* PD14 */ { 0, 0, 0, 1, 0, 0 }, /* LED */
- /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
- /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
- /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
- /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
- /* PD9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
- /* PD8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
- /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */
- /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */
- /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */
- /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */
- /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
- }
-};
-#endif /* CONFIG_CPM2 */
-
-#define CASL_STRING1 "casl=xx"
-#define CASL_STRING2 "casl="
-
-static const int casl_table[] = { 20, 25, 30 };
-#define N_CASL (sizeof(casl_table) / sizeof(casl_table[0]))
-
-int cas_latency(void)
-{
- char *s = getenv("serial#");
- int casl;
- int val;
- int i;
-
- casl = CONFIG_DDR_DEFAULT_CL;
-
- if (s != NULL) {
- if (strncmp(s + strlen(s) - strlen(CASL_STRING1), CASL_STRING2,
- strlen(CASL_STRING2)) == 0) {
- val = simple_strtoul(s + strlen(s) - 2, NULL, 10);
-
- for (i=0; i<N_CASL; ++i) {
- if (val == casl_table[i]) {
- return val;
- }
- }
- }
- }
-
- return casl;
-}
-
-int checkboard (void)
-{
- char *s = getenv("serial#");
-
- printf("Board: %s", CONFIG_BOARDNAME);
- if (s != NULL) {
- puts(", serial# ");
- puts(s);
- }
- putc('\n');
-
-#ifdef CONFIG_PCI
- printf ("PCI1: 32 bit, %d MHz (compiled)\n",
- CONFIG_SYS_CLK_FREQ / 1000000);
-#else
- printf ("PCI1: disabled\n");
-#endif
-
- /*
- * Initialize local bus.
- */
- local_bus_init ();
-
- return 0;
-}
-
-int misc_init_r (void)
-{
- volatile ccsr_lbc_t *memctl = (void *)(CFG_MPC85xx_LBC_ADDR);
-
- /*
- * Adjust flash start and offset to detected values
- */
- gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
- gd->bd->bi_flashoffset = 0;
-
- /*
- * Check if boot FLASH isn't max size
- */
- if (gd->bd->bi_flashsize < (0 - CFG_FLASH0)) {
- memctl->or0 = gd->bd->bi_flashstart | (CFG_OR0_PRELIM & 0x00007fff);
- memctl->br0 = gd->bd->bi_flashstart | (CFG_BR0_PRELIM & 0x00007fff);
-
- /*
- * Re-check to get correct base address
- */
- flash_get_size(gd->bd->bi_flashstart, CFG_MAX_FLASH_BANKS - 1);
- }
-
- /*
- * Check if only one FLASH bank is available
- */
- if (gd->bd->bi_flashsize != CFG_MAX_FLASH_BANKS * (0 - CFG_FLASH0)) {
- memctl->or1 = 0;
- memctl->br1 = 0;
-
- /*
- * Re-do flash protection upon new addresses
- */
- flash_protect (FLAG_PROTECT_CLEAR,
- gd->bd->bi_flashstart, 0xffffffff,
- &flash_info[CFG_MAX_FLASH_BANKS - 1]);
-
- /* Monitor protection ON by default */
- flash_protect (FLAG_PROTECT_SET,
- CFG_MONITOR_BASE, CFG_MONITOR_BASE + monitor_flash_len - 1,
- &flash_info[CFG_MAX_FLASH_BANKS - 1]);
-
- /* Environment protection ON by default */
- flash_protect (FLAG_PROTECT_SET,
- CFG_ENV_ADDR,
- CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
- &flash_info[CFG_MAX_FLASH_BANKS - 1]);
-
- /* Redundant environment protection ON by default */
- flash_protect (FLAG_PROTECT_SET,
- CFG_ENV_ADDR_REDUND,
- CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
- &flash_info[CFG_MAX_FLASH_BANKS - 1]);
- }
-
- return 0;
-}
-
-/*
- * Initialize Local Bus
- */
-void local_bus_init (void)
-{
- volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
- volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-
- uint clkdiv;
- uint lbc_hz;
- sys_info_t sysinfo;
-
- /*
- * Errata LBC11.
- * Fix Local Bus clock glitch when DLL is enabled.
- *
- * If localbus freq is < 66Mhz, DLL bypass mode must be used.
- * If localbus freq is > 133Mhz, DLL can be safely enabled.
- * Between 66 and 133, the DLL is enabled with an override workaround.
- */
-
- get_sys_info (&sysinfo);
- clkdiv = lbc->lcrr & 0x0f;
- lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
-
- if (lbc_hz < 66) {
- lbc->lcrr = CFG_LBC_LCRR | 0x80000000; /* DLL Bypass */
- lbc->ltedr = 0xa4c80000; /* DK: !!! */
-
- } else if (lbc_hz >= 133) {
- lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */
-
- } else {
- /*
- * On REV1 boards, need to change CLKDIV before enable DLL.
- * Default CLKDIV is 8, change it to 4 temporarily.
- */
- uint pvr = get_pvr ();
- uint temp_lbcdll = 0;
-
- if (pvr == PVR_85xx_REV1) {
- /* FIXME: Justify the high bit here. */
- lbc->lcrr = 0x10000004;
- }
-
- lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */
- udelay (200);
-
- /*
- * Sample LBC DLL ctrl reg, upshift it to set the
- * override bits.
- */
- temp_lbcdll = gur->lbcdllcr;
- gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
- asm ("sync;isync;msync");
- }
-}
-
-#if defined(CONFIG_PCI)
-/*
- * Initialize PCI Devices, report devices found.
- */
-
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_mpc85xxads_config_table[] = {
- {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_IDSEL_NUMBER, PCI_ANY_ID,
- pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
- PCI_ENET0_MEMADDR,
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER}},
- {}
-};
-#endif
-
-
-static struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
- config_table:pci_mpc85xxads_config_table,
-#endif
-};
-
-#endif /* CONFIG_PCI */
-
-
-void pci_init_board (void)
-{
-#ifdef CONFIG_PCI
- pci_mpc85xx_init (&hose);
-#endif /* CONFIG_PCI */
-}
-
-#ifdef CONFIG_BOARD_EARLY_INIT_R
-int board_early_init_r (void)
-{
-#ifdef CONFIG_PS2MULT
- ps2mult_early_init();
-#endif /* CONFIG_PS2MULT */
- return (0);
-}
-#endif /* CONFIG_BOARD_EARLY_INIT_R */
COBJS-y += env_flash.o
COBJS-y += env_eeprom.o
COBJS-y += env_onenand.o
+COBJS-y += env_sf.o
COBJS-y += env_nvram.o
COBJS-y += env_nowhere.o
COBJS-y += exports.o
COBJS-y += cmd_mac.o
COBJS-$(CONFIG_CMD_MFSL) += cmd_mfsl.o
COBJS-$(CONFIG_MP) += cmd_mp.o
+COBJS-$(CONFIG_CMD_SF) += cmd_sf.o
COBJS := $(COBJS-y)
SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c)
--- /dev/null
+/*
+ * Command for accessing DataFlash.
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ */
+#include <common.h>
+#include <df.h>
+
+static int do_df(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ const char *cmd;
+
+ /* need at least two arguments */
+ if (argc < 2)
+ goto usage;
+
+ cmd = argv[1];
+
+ if (strcmp(cmd, "init") == 0) {
+ df_init(0, 0, 1000000);
+ return 0;
+ }
+
+ if (strcmp(cmd, "info") == 0) {
+ df_show_info();
+ return 0;
+ }
+
+usage:
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+}
+
+U_BOOT_CMD(
+ sf, 2, 1, do_serial_flash,
+ "sf - Serial flash sub-system\n",
+ "probe [bus:]cs - init flash device on given SPI bus and CS\n")
#endif
static char *lbuf;
+unsigned long __logbuffer_base(void)
+{
+ return CFG_SDRAM_BASE + gd->bd->bi_memsize - LOGBUFF_LEN;
+}
+unsigned long logbuffer_base (void) __attribute__((weak, alias("__logbuffer_base")));
+
void logbuff_init_ptrs (void)
{
unsigned long tag, post_word;
log = (logbuff_t *)CONFIG_ALT_LH_ADDR;
lbuf = (char *)CONFIG_ALT_LB_ADDR;
#else
- log = (logbuff_t *)(gd->bd->bi_memsize-LOGBUFF_LEN) - 1;
+ log = (logbuff_t *)(logbuffer_base ()) - 1;
lbuf = (char *)log->buf;
#endif
u8 *part_num, struct part_info **part);
#endif
-extern nand_info_t nand_info[]; /* info for NAND chips */
-
static int nand_dump_oob(nand_info_t *nand, ulong off)
{
return 0;
!defined(CFG_ENV_IS_IN_DATAFLASH) && \
!defined(CFG_ENV_IS_IN_NAND) && \
!defined(CFG_ENV_IS_IN_ONENAND) && \
+ !defined(CFG_ENV_IS_IN_SPI_FLASH) && \
!defined(CFG_ENV_IS_NOWHERE)
-# error Define one of CFG_ENV_IS_IN_{NVRAM|EEPROM|FLASH|DATAFLASH|ONENAND|NOWHERE}
+# error Define one of CFG_ENV_IS_IN_{NVRAM|EEPROM|FLASH|DATAFLASH|ONENAND|SPI_FLASH|NOWHERE}
#endif
#define XMK_STR(x) #x
--- /dev/null
+/*
+ * Command for accessing SPI flash.
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ */
+#include <common.h>
+#include <spi_flash.h>
+
+#include <asm/io.h>
+
+#ifndef CONFIG_SF_DEFAULT_SPEED
+# define CONFIG_SF_DEFAULT_SPEED 1000000
+#endif
+#ifndef CONFIG_SF_DEFAULT_MODE
+# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
+#endif
+
+static struct spi_flash *flash;
+
+static int do_spi_flash_probe(int argc, char *argv[])
+{
+ unsigned int bus = 0;
+ unsigned int cs;
+ unsigned int speed = CONFIG_SF_DEFAULT_SPEED;
+ unsigned int mode = CONFIG_SF_DEFAULT_MODE;
+ char *endp;
+ struct spi_flash *new;
+
+ if (argc < 2)
+ goto usage;
+
+ cs = simple_strtoul(argv[1], &endp, 0);
+ if (*argv[1] == 0 || (*endp != 0 && *endp != ':'))
+ goto usage;
+ if (*endp == ':') {
+ if (endp[1] == 0)
+ goto usage;
+
+ bus = cs;
+ cs = simple_strtoul(endp + 1, &endp, 0);
+ if (*endp != 0)
+ goto usage;
+ }
+
+ if (argc >= 3) {
+ speed = simple_strtoul(argv[2], &endp, 0);
+ if (*argv[2] == 0 || *endp != 0)
+ goto usage;
+ }
+ if (argc >= 4) {
+ mode = simple_strtoul(argv[3], &endp, 0);
+ if (*argv[3] == 0 || *endp != 0)
+ goto usage;
+ }
+
+ new = spi_flash_probe(bus, cs, speed, mode);
+ if (!new) {
+ printf("Failed to initialize SPI flash at %u:%u\n", bus, cs);
+ return 1;
+ }
+
+ if (flash)
+ spi_flash_free(flash);
+ flash = new;
+
+ printf("%u KiB %s at %u:%u is now current device\n",
+ flash->size >> 10, flash->name, bus, cs);
+
+ return 0;
+
+usage:
+ puts("Usage: sf probe [bus:]cs [hz] [mode]\n");
+ return 1;
+}
+
+static int do_spi_flash_read_write(int argc, char *argv[])
+{
+ unsigned long addr;
+ unsigned long offset;
+ unsigned long len;
+ void *buf;
+ char *endp;
+ int ret;
+
+ if (argc < 4)
+ goto usage;
+
+ addr = simple_strtoul(argv[1], &endp, 16);
+ if (*argv[1] == 0 || *endp != 0)
+ goto usage;
+ offset = simple_strtoul(argv[2], &endp, 16);
+ if (*argv[2] == 0 || *endp != 0)
+ goto usage;
+ len = simple_strtoul(argv[3], &endp, 16);
+ if (*argv[3] == 0 || *endp != 0)
+ goto usage;
+
+ buf = map_physmem(addr, len, MAP_WRBACK);
+ if (!buf) {
+ puts("Failed to map physical memory\n");
+ return 1;
+ }
+
+ if (strcmp(argv[0], "read") == 0)
+ ret = spi_flash_read(flash, offset, len, buf);
+ else
+ ret = spi_flash_write(flash, offset, len, buf);
+
+ unmap_physmem(buf, len);
+
+ if (ret) {
+ printf("SPI flash %s failed\n", argv[0]);
+ return 1;
+ }
+
+ return 0;
+
+usage:
+ printf("Usage: sf %s addr offset len\n", argv[0]);
+ return 1;
+}
+
+static int do_spi_flash_erase(int argc, char *argv[])
+{
+ unsigned long offset;
+ unsigned long len;
+ char *endp;
+ int ret;
+
+ if (argc < 3)
+ goto usage;
+
+ offset = simple_strtoul(argv[1], &endp, 16);
+ if (*argv[1] == 0 || *endp != 0)
+ goto usage;
+ len = simple_strtoul(argv[2], &endp, 16);
+ if (*argv[2] == 0 || *endp != 0)
+ goto usage;
+
+ ret = spi_flash_erase(flash, offset, len);
+ if (ret) {
+ printf("SPI flash %s failed\n", argv[0]);
+ return 1;
+ }
+
+ return 0;
+
+usage:
+ puts("Usage: sf erase offset len\n");
+ return 1;
+}
+
+static int do_spi_flash(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ const char *cmd;
+
+ /* need at least two arguments */
+ if (argc < 2)
+ goto usage;
+
+ cmd = argv[1];
+
+ if (strcmp(cmd, "probe") == 0)
+ return do_spi_flash_probe(argc - 1, argv + 1);
+
+ /* The remaining commands require a selected device */
+ if (!flash) {
+ puts("No SPI flash selected. Please run `sf probe'\n");
+ return 1;
+ }
+
+ if (strcmp(cmd, "read") == 0 || strcmp(cmd, "write") == 0)
+ return do_spi_flash_read_write(argc - 1, argv + 1);
+ if (strcmp(cmd, "erase") == 0)
+ return do_spi_flash_erase(argc - 1, argv + 1);
+
+usage:
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+}
+
+U_BOOT_CMD(
+ sf, 5, 1, do_spi_flash,
+ "sf - SPI flash sub-system\n",
+ "probe [bus:]cs [hz] [mode] - init flash device on given SPI bus\n"
+ " and chip select\n"
+ "sf read addr offset len - read `len' bytes starting at\n"
+ " `offset' to memory at `addr'\n"
+ "sf write addr offset len - write `len' bytes from memory\n"
+ " at `addr' to flash at `offset'\n"
+ "sf erase offset len - erase `len' bytes from `offset'\n");
# define MAX_SPI_BYTES 32 /* Maximum number of bytes we can handle */
#endif
-/*
- * External table of chip select functions (see the appropriate board
- * support for the actual definition of the table).
- */
-extern spi_chipsel_type spi_chipsel[];
-extern int spi_chipsel_cnt;
+#ifndef CONFIG_DEFAULT_SPI_BUS
+# define CONFIG_DEFAULT_SPI_BUS 0
+#endif
+#ifndef CONFIG_DEFAULT_SPI_MODE
+# define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
+#endif
/*
* Values from last command.
*/
-static int device;
-static int bitlen;
-static uchar dout[MAX_SPI_BYTES];
-static uchar din[MAX_SPI_BYTES];
+static unsigned int device;
+static int bitlen;
+static uchar dout[MAX_SPI_BYTES];
+static uchar din[MAX_SPI_BYTES];
/*
* SPI read/write
int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
+ struct spi_slave *slave;
char *cp = 0;
uchar tmp;
int j;
}
}
- if ((device < 0) || (device >= spi_chipsel_cnt)) {
- printf("Invalid device %d, giving up.\n", device);
- return 1;
- }
if ((bitlen < 0) || (bitlen > (MAX_SPI_BYTES * 8))) {
printf("Invalid bitlen %d, giving up.\n", bitlen);
return 1;
}
- debug ("spi_chipsel[%d] = %08X\n",
- device, (uint)spi_chipsel[device]);
+ /* FIXME: Make these parameters run-time configurable */
+ slave = spi_setup_slave(CONFIG_DEFAULT_SPI_BUS, device, 1000000,
+ CONFIG_DEFAULT_SPI_MODE);
+ if (!slave) {
+ printf("Invalid device %d, giving up.\n", device);
+ return 1;
+ }
+
+ debug ("spi chipsel = %08X\n", device);
- if(spi_xfer(spi_chipsel[device], bitlen, dout, din) != 0) {
+ spi_claim_bus(slave);
+ if(spi_xfer(slave, bitlen, dout, din,
+ SPI_XFER_BEGIN | SPI_XFER_END) != 0) {
printf("Error with the SPI transaction.\n");
rcode = 1;
} else {
}
printf("\n");
}
+ spi_release_bus(slave);
+ spi_free_slave(slave);
return rcode;
}
+#include <common.h>
+
#if 0 /* Moved to malloc.h */
/* ---------- To make a malloc.h, start cutting here ------------ */
#endif /* 0 */
#endif /* 0 */ /* Moved to malloc.h */
-#include <common.h>
DECLARE_GLOBAL_DATA_PTR;
"\0"
};
-#if defined(CFG_ENV_IS_IN_NAND) /* Environment is in Nand Flash */
+#if defined(CFG_ENV_IS_IN_NAND) /* Environment is in Nand Flash */ \
+ || defined(CFG_ENV_IS_IN_SPI_FLASH)
int default_environment_size = sizeof(default_environment);
#endif
size_t start, size_t len,
size_t * retlen, u_char * buf);
-/* info for NAND chips, defined in drivers/mtd/nand/nand.c */
-extern nand_info_t nand_info[];
-
/* references to names in env_common.c */
extern uchar default_environment[];
extern int default_environment_size;
--- /dev/null
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Andreas Heppel <aheppel@sysgo.de>
+ *
+ * (C) Copyright 2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#ifdef CFG_ENV_IS_IN_SPI_FLASH
+
+#include <environment.h>
+#include <spi_flash.h>
+
+#ifndef CFG_ENV_SPI_BUS
+# define CFG_ENV_SPI_BUS 0
+#endif
+#ifndef CFG_ENV_SPI_CS
+# define CFG_ENV_SPI_CS 0
+#endif
+#ifndef CFG_ENV_SPI_MAX_HZ
+# define CFG_ENV_SPI_MAX_HZ 1000000
+#endif
+#ifndef CFG_ENV_SPI_MODE
+# define CFG_ENV_SPI_MODE SPI_MODE_3
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* references to names in env_common.c */
+extern uchar default_environment[];
+extern int default_environment_size;
+
+char * env_name_spec = "SPI Flash";
+env_t *env_ptr;
+
+static struct spi_flash *env_flash;
+
+uchar env_get_char_spec(int index)
+{
+ return *((uchar *)(gd->env_addr + index));
+}
+
+int saveenv(void)
+{
+ if (!env_flash) {
+ puts("Environment SPI flash not initialized\n");
+ return 1;
+ }
+
+ puts("Erasing SPI flash...");
+ if (spi_flash_erase(env_flash, CFG_ENV_OFFSET, CFG_ENV_SIZE))
+ return 1;
+
+ puts("Writing to SPI flash...");
+ if (spi_flash_write(env_flash, CFG_ENV_OFFSET, CFG_ENV_SIZE, env_ptr))
+ return 1;
+
+ puts("done\n");
+ return 0;
+}
+
+void env_relocate_spec(void)
+{
+ int ret;
+
+ env_flash = spi_flash_probe(CFG_ENV_SPI_BUS, CFG_ENV_SPI_CS,
+ CFG_ENV_SPI_MAX_HZ, CFG_ENV_SPI_MODE);
+ if (!env_flash)
+ goto err_probe;
+
+ ret = spi_flash_read(env_flash, CFG_ENV_OFFSET, CFG_ENV_SIZE, env_ptr);
+ if (ret)
+ goto err_read;
+
+ if (crc32(0, env_ptr->data, ENV_SIZE) != env_ptr->crc)
+ goto err_crc;
+
+ gd->env_valid = 1;
+
+ return;
+
+err_read:
+ spi_flash_free(env_flash);
+ env_flash = NULL;
+err_probe:
+err_crc:
+ puts("*** Warning - bad CRC, using default environment\n\n");
+
+ if (default_environment_size > CFG_ENV_SIZE) {
+ gd->env_valid = 0;
+ puts("*** Error - default environment is too large\n\n");
+ return;
+ }
+
+ memset(env_ptr, 0, sizeof(env_t));
+ memcpy(env_ptr->data, default_environment, default_environment_size);
+ env_ptr->crc = crc32(0, env_ptr->data, ENV_SIZE);
+ gd->env_valid = 1;
+}
+
+int env_init(void)
+{
+ /* SPI flash isn't usable before relocation */
+ gd->env_addr = (ulong)&default_environment[0];
+ gd->env_valid = 1;
+
+ return 0;
+}
+
+#endif /* CFG_ENV_IS_IN_SPI_FLASH */
#include <dataflash.h>
#endif
+#ifdef CONFIG_LOGBUFFER
+#include <logbuff.h>
+#endif
+
#if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE)
#include <rtc.h>
#endif
initrd_high = ~0;
}
+
+#ifdef CONFIG_LOGBUFFER
+ /* Prevent initrd from overwriting logbuffer */
+ lmb_reserve(lmb, logbuffer_base() - LOGBUFF_OVERHEAD, LOGBUFF_RESERVE);
+#endif
+
debug ("## initrd_high = 0x%08lx, copy_to_ram = %d\n",
initrd_high, initrd_copy_to_ram);
#include <lcdvideo.h>
#endif
+#if defined(CONFIG_ATMEL_LCD)
+#include <atmel_lcdc.h>
+#include <nand.h>
+#endif
+
#ifdef CONFIG_LCD
/************************************************************************/
static void lcd_setfgcolor (int color)
{
+#ifdef CONFIG_ATMEL_LCD
+ lcd_color_fg = color;
+#else
lcd_color_fg = color & 0x0F;
+#endif
}
/*----------------------------------------------------------------------*/
static void lcd_setbgcolor (int color)
{
+#ifdef CONFIG_ATMEL_LCD
+ lcd_color_bg = color;
+#else
lcd_color_bg = color & 0x0F;
+#endif
}
/*----------------------------------------------------------------------*/
#ifdef CONFIG_LCD_LOGO
void bitmap_plot (int x, int y)
{
+#ifdef CONFIG_ATMEL_LCD
+ uint *cmap;
+#else
ushort *cmap;
+#endif
ushort i, j;
uchar *bmap;
uchar *fb;
cmap = (ushort *)fbi->palette;
#elif defined(CONFIG_MPC823)
cmap = (ushort *)&(cp->lcd_cmap[BMP_LOGO_OFFSET*sizeof(ushort)]);
+#elif defined(CONFIG_ATMEL_LCD)
+ cmap = (uint *) (panel_info.mmio + ATMEL_LCDC_LUT(0));
#endif
WATCHDOG_RESET();
/* Set color map */
for (i=0; i<(sizeof(bmp_logo_palette)/(sizeof(ushort))); ++i) {
ushort colreg = bmp_logo_palette[i];
+#ifdef CONFIG_ATMEL_LCD
+ uint lut_entry;
+#ifdef CONFIG_ATMEL_LCD_BGR555
+ lut_entry = ((colreg & 0x000F) << 11) |
+ ((colreg & 0x00F0) << 2) |
+ ((colreg & 0x0F00) >> 7);
+#else /* CONFIG_ATMEL_LCD_RGB565 */
+ lut_entry = ((colreg & 0x000F) << 1) |
+ ((colreg & 0x00F0) << 3) |
+ ((colreg & 0x0F00) << 4);
+#endif
+ *(cmap + BMP_LOGO_OFFSET) = lut_entry;
+ cmap++;
+#else /* !CONFIG_ATMEL_LCD */
#ifdef CFG_INVERT_COLORS
*cmap++ = 0xffff - colreg;
#else
*cmap++ = colreg;
#endif
+#endif /* CONFIG_ATMEL_LCD */
}
WATCHDOG_RESET();
*/
int lcd_display_bitmap(ulong bmp_image, int x, int y)
{
-#if !defined(CONFIG_MCC200)
+#ifdef CONFIG_ATMEL_LCD
+ uint *cmap;
+#elif !defined(CONFIG_MCC200)
ushort *cmap;
#endif
ushort i, j;
cmap = (ushort *)fbi->palette;
#elif defined(CONFIG_MPC823)
cmap = (ushort *)&(cp->lcd_cmap[255*sizeof(ushort)]);
+#elif defined(CONFIG_ATMEL_LCD)
+ cmap = (uint *) (panel_info.mmio + ATMEL_LCDC_LUT(0));
#else
# error "Don't know location of color map"
#endif
#ifdef CONFIG_LCD_INFO
char info[80];
char temp[32];
+#ifdef CONFIG_ATMEL_LCD
+ int i;
+ ulong dram_size, nand_size;
+#endif
#endif /* CONFIG_LCD_INFO */
#ifdef CONFIG_SPLASH_SCREEN
# endif /* CONFIG_LCD_INFO */
#endif /* CONFIG_MPC823 */
+#ifdef CONFIG_ATMEL_LCD
+# ifdef CONFIG_LCD_INFO
+ sprintf (info, "%s", U_BOOT_VERSION);
+ lcd_drawchars (LCD_INFO_X, LCD_INFO_Y, (uchar *)info, strlen(info));
+
+ sprintf (info, "(C) 2008 ATMEL Corp");
+ lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT,
+ (uchar *)info, strlen(info));
+
+ sprintf (info, "at91support@atmel.com");
+ lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 2,
+ (uchar *)info, strlen(info));
+
+ sprintf (info, "%s CPU at %s MHz",
+ AT91_CPU_NAME,
+ strmhz(temp, AT91_MAIN_CLOCK));
+ lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3,
+ (uchar *)info, strlen(info));
+
+ dram_size = 0;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+ dram_size += gd->bd->bi_dram[i].size;
+ nand_size = 0;
+ for (i = 0; i < CFG_MAX_NAND_DEVICE; i++)
+ nand_size += nand_info[i].size;
+ sprintf (info, " %ld MB SDRAM, %ld MB NAND",
+ dram_size >> 20,
+ nand_size >> 20 );
+ lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4,
+ (uchar *)info, strlen(info));
+# endif /* CONFIG_LCD_INFO */
+#endif /* CONFIG_ATMEL_LCD */
+
+
#if defined(CONFIG_LCD_LOGO) && !defined(CONFIG_LCD_INFO_BELOW_LOGO)
return ((void *)((ulong)lcd_base + BMP_LOGO_HEIGHT * lcd_line_length));
#else
int rc;
static int initted = 0;
- if (!initted) {
- hist_init();
- initted = 1;
- }
-
-
/*
* History uses a global array which is not
* writable until after relocation to RAM.
* Read 8 bits, MSB first.
*/
I2C_TRISTATE;
+ I2C_SDA(1);
data = 0;
for(j = 0; j < 8; j++) {
I2C_SCL(0);
#if defined(CONFIG_SOFT_SPI)
+#include <malloc.h>
+
/*-----------------------------------------------------------------------
* Definitions
*/
#define PRINTD(fmt,args...)
#endif
+struct soft_spi_slave {
+ struct spi_slave slave;
+ unsigned int mode;
+};
+
+static inline struct soft_spi_slave *to_soft_spi(struct spi_slave *slave)
+{
+ return container_of(slave, struct soft_spi_slave, slave);
+}
/*=====================================================================*/
/* Public Functions */
#endif
}
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct soft_spi_slave *ss;
+
+ if (!spi_cs_is_valid(bus, cs))
+ return NULL;
+
+ ss = malloc(sizeof(struct soft_spi_slave));
+ if (!ss)
+ return NULL;
+
+ ss->slave.bus = bus;
+ ss->slave.cs = cs;
+ ss->mode = mode;
+
+ /* TODO: Use max_hz to limit the SCK rate */
+
+ return &ss->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ struct soft_spi_slave *ss = to_soft_spi(slave);
+
+ free(ss);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+#ifdef CFG_IMMR
+ volatile immap_t *immr = (immap_t *)CFG_IMMR;
+#endif
+ struct soft_spi_slave *ss = to_soft_spi(slave);
+
+ /*
+ * Make sure the SPI clock is in idle state as defined for
+ * this slave.
+ */
+ if (ss->mode & SPI_CPOL)
+ SPI_SCL(1);
+ else
+ SPI_SCL(0);
+
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+ /* Nothing to do */
+}
/*-----------------------------------------------------------------------
* SPI transfer
* and "din" can point to the same memory location, in which case the
* input data overwrites the output data (since both are buffered by
* temporary variables, this is OK).
- *
- * If the chipsel() function is not NULL, it is called with a parameter
- * of '1' (chip select active) at the start of the transfer and again with
- * a parameter of '0' at the end of the transfer.
- *
- * If the chipsel() function _is_ NULL, it the responsibility of the
- * caller to make the appropriate chip select active before calling
- * spi_xfer() and making it inactive after spi_xfer() returns.
*/
-int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
{
#ifdef CFG_IMMR
volatile immap_t *immr = (immap_t *)CFG_IMMR;
#endif
- uchar tmpdin = 0;
- uchar tmpdout = 0;
- int j;
+ struct soft_spi_slave *ss = to_soft_spi(slave);
+ uchar tmpdin = 0;
+ uchar tmpdout = 0;
+ const u8 *txd = dout;
+ u8 *rxd = din;
+ int cpol = ss->mode & SPI_CPOL;
+ int cpha = ss->mode & SPI_CPHA;
+ unsigned int j;
- PRINTD("spi_xfer: chipsel %08X dout %08X din %08X bitlen %d\n",
- (int)chipsel, *(uint *)dout, *(uint *)din, bitlen);
+ PRINTD("spi_xfer: slave %u:%u dout %08X din %08X bitlen %u\n",
+ slave->bus, slave->cs, *(uint *)txd, *(uint *)rxd, bitlen);
- if(chipsel != NULL) {
- (*chipsel)(1); /* select the target chip */
- }
+ if (flags & SPI_XFER_BEGIN)
+ spi_cs_activate(slave);
for(j = 0; j < bitlen; j++) {
/*
* Check if it is time to work on a new byte.
*/
if((j % 8) == 0) {
- tmpdout = *dout++;
+ tmpdout = *txd++;
if(j != 0) {
- *din++ = tmpdin;
+ *rxd++ = tmpdin;
}
tmpdin = 0;
}
- SPI_SCL(0);
+
+ if (!cpha)
+ SPI_SCL(!cpol);
SPI_SDA(tmpdout & 0x80);
SPI_DELAY;
- SPI_SCL(1);
+ if (cpha)
+ SPI_SCL(!cpol);
+ else
+ SPI_SCL(cpol);
+ tmpdin <<= 1;
+ tmpdin |= SPI_READ;
+ tmpdout <<= 1;
SPI_DELAY;
- tmpdin <<= 1;
- tmpdin |= SPI_READ;
- tmpdout <<= 1;
+ if (cpha)
+ SPI_SCL(cpol);
}
/*
* If the number of bits isn't a multiple of 8, shift the last
*/
if((bitlen % 8) != 0)
tmpdin <<= 8 - (bitlen % 8);
- *din++ = tmpdin;
-
- SPI_SCL(0); /* SPI wants the clock left low for idle */
+ *rxd++ = tmpdin;
- if(chipsel != NULL) {
- (*chipsel)(0); /* deselect the target chip */
-
- }
+ if (flags & SPI_XFER_END)
+ spi_cs_deactivate(slave);
return(0);
}
mtspr IBAT1U, r0
mtspr IBAT2U, r0
mtspr IBAT3U, r0
-#ifdef CONFIG_750FX
+#ifdef CONFIG_HIGH_BATS
mtspr IBAT4U, r0
mtspr IBAT5U, r0
mtspr IBAT6U, r0
mtspr DBAT1U, r0
mtspr DBAT2U, r0
mtspr DBAT3U, r0
-#ifdef CONFIG_750FX
+#ifdef CONFIG_HIGH_BATS
mtspr DBAT4U, r0
mtspr DBAT5U, r0
mtspr DBAT6U, r0
mtspr DBAT3U, r3
isync
-#ifdef CONFIG_750FX
+#ifdef CONFIG_HIGH_BATS
/* IBAT 4 */
addis r4, r0, CFG_IBAT4L@h
ori r4, r4, CFG_IBAT4L@l
PLATFORM_CPPFLAGS += -march=armv5te
PLATFORM_CPPFLAGS += $(call cc-option,-mtune=arm926ejs,)
+LDSCRIPT := $(SRCTREE)/cpu/arm926ejs/at91sam9/u-boot.lds
{
/* Enable USB host clock. */
at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_UHP);
+#ifdef CONFIG_AT91SAM9261
+ at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP | AT91_PMC_HCK0);
+#else
at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP);
+#endif
return 0;
}
{
/* Disable USB host clock. */
at91_sys_write(AT91_PMC_PCDR, 1 << AT91_ID_UHP);
+#ifdef CONFIG_AT91SAM9261
+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP | AT91_PMC_HCK0);
+#else
at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP);
+#endif
return 0;
}
LIB := $(obj)lib$(CPU).a
-START := start.o
-SOBJS := entry.o
-COBJS := cpu.o hsdramc.o exception.o cache.o
-COBJS += interrupts.o pio.o atmel_mci.o
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
+START-y += start.o
+
+COBJS-y += cpu.o
+COBJS-y += hsdramc.o
+COBJS-y += exception.o
+COBJS-y += cache.o
+COBJS-y += interrupts.o
+COBJS-y += pio.o
+COBJS-$(CONFIG_MMC) += atmel_mci.o
+
+SRCS := $(START-y:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
+START := $(addprefix $(obj),$(START-y))
all: $(obj).depend $(START) $(LIB)
LIB := $(obj)lib$(SOC).a
-COBJS := gpio.o
+COBJS := gpio.o clk.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
--- /dev/null
+/*
+ * Copyright (C) 2005-2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/clk.h>
+#include <asm/arch/memory-map.h>
+
+#include "sm.h"
+
+void clk_init(void)
+{
+ uint32_t cksel;
+
+ /* in case of soft resets, disable watchdog */
+ sm_writel(WDT_CTRL, SM_BF(KEY, 0x55));
+ sm_writel(WDT_CTRL, SM_BF(KEY, 0xaa));
+
+#ifdef CONFIG_PLL
+ /* Initialize the PLL */
+ sm_writel(PM_PLL0, (SM_BF(PLLCOUNT, CFG_PLL0_SUPPRESS_CYCLES)
+ | SM_BF(PLLMUL, CFG_PLL0_MUL - 1)
+ | SM_BF(PLLDIV, CFG_PLL0_DIV - 1)
+ | SM_BF(PLLOPT, CFG_PLL0_OPT)
+ | SM_BF(PLLOSC, 0)
+ | SM_BIT(PLLEN)));
+
+ /* Wait for lock */
+ while (!(sm_readl(PM_ISR) & SM_BIT(LOCK0))) ;
+#endif
+
+ /* Set up clocks for the CPU and all peripheral buses */
+ cksel = 0;
+ if (CFG_CLKDIV_CPU)
+ cksel |= SM_BIT(CPUDIV) | SM_BF(CPUSEL, CFG_CLKDIV_CPU - 1);
+ if (CFG_CLKDIV_HSB)
+ cksel |= SM_BIT(HSBDIV) | SM_BF(HSBSEL, CFG_CLKDIV_HSB - 1);
+ if (CFG_CLKDIV_PBA)
+ cksel |= SM_BIT(PBADIV) | SM_BF(PBASEL, CFG_CLKDIV_PBA - 1);
+ if (CFG_CLKDIV_PBB)
+ cksel |= SM_BIT(PBBDIV) | SM_BF(PBBSEL, CFG_CLKDIV_PBB - 1);
+ sm_writel(PM_CKSEL, cksel);
+
+#ifdef CONFIG_PLL
+ /* Use PLL0 as main clock */
+ sm_writel(PM_MCCTRL, SM_BIT(PLLSEL));
+#endif
+}
*/
#include <common.h>
+#include <asm/io.h>
+
#include <asm/arch/chip-features.h>
#include <asm/arch/gpio.h>
+#include <asm/arch/memory-map.h>
/*
* Lots of small functions here. We depend on --gc-sections getting
gpio_select_periph_A(GPIO_PIN_PA15, 0); /* DATA3 */
}
#endif
+
+#ifdef AT32AP700x_CHIP_HAS_SPI
+void gpio_enable_spi0(unsigned long cs_mask)
+{
+ u32 pa_mask = 0;
+
+ gpio_select_periph_A(GPIO_PIN_PA0, 0); /* MISO */
+ gpio_select_periph_A(GPIO_PIN_PA1, 0); /* MOSI */
+ gpio_select_periph_A(GPIO_PIN_PA2, 0); /* SCK */
+
+ if (cs_mask & (1 << 0))
+ pa_mask |= 1 << 3; /* NPCS0 */
+ if (cs_mask & (1 << 1))
+ pa_mask |= 1 << 4; /* NPCS1 */
+ if (cs_mask & (1 << 2))
+ pa_mask |= 1 << 5; /* NPCS2 */
+ if (cs_mask & (1 << 3))
+ pa_mask |= 1 << 20; /* NPCS3 */
+
+ __raw_writel(pa_mask, PIOA_BASE + 0x00);
+ __raw_writel(pa_mask, PIOA_BASE + 0x30);
+ __raw_writel(pa_mask, PIOA_BASE + 0x10);
+}
+
+void gpio_enable_spi1(unsigned long cs_mask)
+{
+ gpio_select_periph_B(GPIO_PIN_PA0, 0); /* MISO */
+ gpio_select_periph_B(GPIO_PIN_PB1, 0); /* MOSI */
+ gpio_select_periph_B(GPIO_PIN_PB5, 0); /* SCK */
+
+ if (cs_mask & (1 << 0))
+ gpio_select_periph_B(GPIO_PIN_PB2, 0); /* NPCS0 */
+ if (cs_mask & (1 << 1))
+ gpio_select_periph_B(GPIO_PIN_PB3, 0); /* NPCS1 */
+ if (cs_mask & (1 << 2))
+ gpio_select_periph_B(GPIO_PIN_PB4, 0); /* NPCS2 */
+ if (cs_mask & (1 << 3))
+ gpio_select_periph_A(GPIO_PIN_PA27, 0); /* NPCS3 */
+}
+#endif
*/
#include <common.h>
-#ifdef CONFIG_MMC
-
#include <part.h>
#include <mmc.h>
pr_debug("mmc: status 0x%08lx\n", status);
- if (status & ERROR_FLAGS) {
+ if (status & error_flags) {
printf("mmc: command %lu failed (status: 0x%08lx)\n",
cmd, status);
return -EIO;
static unsigned long
mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
- unsigned long *buffer)
+ void *buffer)
{
int ret, i = 0;
unsigned long resp[4];
unsigned long card_status, data;
unsigned long wordcount;
+ u32 *p = buffer;
u32 status;
if (blkcnt == 0)
if (status & MMCI_BIT(RXRDY)) {
data = mmci_readl(RDR);
/* pr_debug("%x\n", data); */
- *buffer++ = data;
+ *p++ = data;
wordcount++;
}
} while(wordcount < (mmc_blkdev.blksz / 4));
dtocyc = timeout_clks;
dtomul = 0;
+ shift = 0;
while (dtocyc > 15 && dtomul < 8) {
dtomul++;
shift = dtomul_to_shift[dtomul];
{
return 0;
}
-
-#endif /* CONFIG_MMC */
#include <asm/arch/memory-map.h>
#include "hsmc3.h"
-#include "sm.h"
/* Sanity checks */
#if (CFG_CLKDIV_CPU > CFG_CLKDIV_HSB) \
DECLARE_GLOBAL_DATA_PTR;
-static void pm_init(void)
-{
- uint32_t cksel;
-
-#ifdef CONFIG_PLL
- /* Initialize the PLL */
- sm_writel(PM_PLL0, (SM_BF(PLLCOUNT, CFG_PLL0_SUPPRESS_CYCLES)
- | SM_BF(PLLMUL, CFG_PLL0_MUL - 1)
- | SM_BF(PLLDIV, CFG_PLL0_DIV - 1)
- | SM_BF(PLLOPT, CFG_PLL0_OPT)
- | SM_BF(PLLOSC, 0)
- | SM_BIT(PLLEN)));
-
- /* Wait for lock */
- while (!(sm_readl(PM_ISR) & SM_BIT(LOCK0))) ;
-#endif
-
- /* Set up clocks for the CPU and all peripheral buses */
- cksel = 0;
- if (CFG_CLKDIV_CPU)
- cksel |= SM_BIT(CPUDIV) | SM_BF(CPUSEL, CFG_CLKDIV_CPU - 1);
- if (CFG_CLKDIV_HSB)
- cksel |= SM_BIT(HSBDIV) | SM_BF(HSBSEL, CFG_CLKDIV_HSB - 1);
- if (CFG_CLKDIV_PBA)
- cksel |= SM_BIT(PBADIV) | SM_BF(PBASEL, CFG_CLKDIV_PBA - 1);
- if (CFG_CLKDIV_PBB)
- cksel |= SM_BIT(PBBDIV) | SM_BF(PBBSEL, CFG_CLKDIV_PBB - 1);
- sm_writel(PM_CKSEL, cksel);
-
- gd->cpu_hz = get_cpu_clk_rate();
-
-#ifdef CONFIG_PLL
- /* Use PLL0 as main clock */
- sm_writel(PM_MCCTRL, SM_BIT(PLLSEL));
-#endif
-}
-
int cpu_init(void)
{
extern void _evba(void);
- char *p;
gd->cpu_hz = CFG_OSC0_HZ;
hsmc3_writel(PULSE0, 0x0b0a0906);
hsmc3_writel(SETUP0, 0x00010002);
- pm_init();
+ clk_init();
+ /* Update the CPU speed according to the PLL configuration */
+ gd->cpu_hz = get_cpu_clk_rate();
+
+ /* Set up the exception handler table and enable exceptions */
sysreg_write(EVBA, (unsigned long)&_evba);
asm volatile("csrf %0" : : "i"(SYSREG_EM_OFFSET));
- /* Lock everything that mess with the flash in the icache */
- for (p = __flashprog_start; p <= (__flashprog_end + CFG_ICACHE_LINESZ);
- p += CFG_ICACHE_LINESZ)
- asm volatile("cache %0, 0x02" : "=m"(*p) :: "memory");
-
return 0;
}
+++ /dev/null
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <asm/sysreg.h>
-#include <asm/ptrace.h>
-
- .section .text.exception,"ax"
- .global _evba
- .type _evba,@function
- .align 10
-_evba:
- .irp x,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16
- .align 2
- rjmp unknown_exception
- .endr
-
- .global timer_interrupt_handler
- .type timer_interrupt_handler,@function
- .align 2
-timer_interrupt_handler:
- /*
- * Increment timer_overflow and re-write COMPARE with 0xffffffff.
- *
- * We're running at interrupt level 3, so we don't need to save
- * r8-r12 or lr to the stack.
- */
- lda.w r8, timer_overflow
- ld.w r9, r8[0]
- mov r10, -1
- mtsr SYSREG_COMPARE, r10
- sub r9, -1
- st.w r8[0], r9
- rete
-
- .type unknown_exception, @function
-unknown_exception:
- pushm r0-r12
- sub r8, sp, REG_R12 - REG_R0 - 4
- mov r9, lr
- mfsr r10, SYSREG_RAR_EX
- mfsr r11, SYSREG_RSR_EX
- pushm r8-r11
- mfsr r12, SYSREG_ECR
- mov r11, sp
- rcall do_unknown_exception
-1: rjmp 1b
printf("CPU Mode: %s\n", cpu_modes[mode]);
/* Avoid exception loops */
- if (regs->sp < CFG_SDRAM_BASE || regs->sp >= gd->stack_end)
+ if (regs->sp < (gd->stack_end - CONFIG_STACKSIZE)
+ || regs->sp >= gd->stack_end)
printf("\nStack pointer seems bogus, won't do stack dump\n");
else
dump_mem("\nStack: ", regs->sp, gd->stack_end);
#include "hsdramc1.h"
-unsigned long sdram_init(const struct sdram_info *info)
+unsigned long sdram_init(void *sdram_base, const struct sdram_config *config)
{
- unsigned long *sdram = (unsigned long *)uncached(info->phys_addr);
unsigned long sdram_size;
- unsigned long tmp;
- unsigned long bus_hz;
+ uint32_t cfgreg;
unsigned int i;
- if (!info->refresh_period)
- panic("ERROR: SDRAM refresh period == 0. "
- "Please update the board code\n");
-
- tmp = (HSDRAMC1_BF(NC, info->col_bits - 8)
- | HSDRAMC1_BF(NR, info->row_bits - 11)
- | HSDRAMC1_BF(NB, info->bank_bits - 1)
- | HSDRAMC1_BF(CAS, info->cas)
- | HSDRAMC1_BF(TWR, info->twr)
- | HSDRAMC1_BF(TRC, info->trc)
- | HSDRAMC1_BF(TRP, info->trp)
- | HSDRAMC1_BF(TRCD, info->trcd)
- | HSDRAMC1_BF(TRAS, info->tras)
- | HSDRAMC1_BF(TXSR, info->txsr));
-
-#ifdef CFG_SDRAM_16BIT
- tmp |= HSDRAMC1_BIT(DBW);
- sdram_size = 1 << (info->row_bits + info->col_bits
- + info->bank_bits + 1);
-#else
- sdram_size = 1 << (info->row_bits + info->col_bits
- + info->bank_bits + 2);
-#endif
-
- hsdramc1_writel(CR, tmp);
+ cfgreg = (HSDRAMC1_BF(NC, config->col_bits - 8)
+ | HSDRAMC1_BF(NR, config->row_bits - 11)
+ | HSDRAMC1_BF(NB, config->bank_bits - 1)
+ | HSDRAMC1_BF(CAS, config->cas)
+ | HSDRAMC1_BF(TWR, config->twr)
+ | HSDRAMC1_BF(TRC, config->trc)
+ | HSDRAMC1_BF(TRP, config->trp)
+ | HSDRAMC1_BF(TRCD, config->trcd)
+ | HSDRAMC1_BF(TRAS, config->tras)
+ | HSDRAMC1_BF(TXSR, config->txsr));
+
+ if (config->data_bits == SDRAM_DATA_16BIT)
+ cfgreg |= HSDRAMC1_BIT(DBW);
+
+ hsdramc1_writel(CR, cfgreg);
+
+ /* Send a NOP to turn on the clock (necessary on some chips) */
+ hsdramc1_writel(MR, HSDRAMC1_MODE_NOP);
+ hsdramc1_readl(MR);
+ writel(0, sdram_base);
/*
* Initialization sequence for SDRAM, from the data sheet:
*/
hsdramc1_writel(MR, HSDRAMC1_MODE_BANKS_PRECHARGE);
hsdramc1_readl(MR);
- writel(0, sdram);
+ writel(0, sdram_base);
/*
* 3. Eight auto-refresh (CBR) cycles are provided
hsdramc1_writel(MR, HSDRAMC1_MODE_AUTO_REFRESH);
hsdramc1_readl(MR);
for (i = 0; i < 8; i++)
- writel(0, sdram);
+ writel(0, sdram_base);
/*
* 4. A mode register set (MRS) cycle is issued to program
* SDRAM parameters, in particular CAS latency and burst
* length.
*
- * CAS from info struct, burst length 1, serial burst type
+ * The address will be chosen by the SDRAMC automatically; we
+ * just have to make sure BA[1:0] are set to 0.
*/
hsdramc1_writel(MR, HSDRAMC1_MODE_LOAD_MODE);
hsdramc1_readl(MR);
- writel(0, sdram + (info->cas << 4));
+ writel(0, sdram_base);
/*
- * 5. A Normal Mode command is provided, 3 clocks after tMRD
- * is met.
- *
- * From the timing diagram, it looks like tMRD is 3
- * cycles...try a dummy read from the peripheral bus.
+ * 5. The application must go into Normal Mode, setting Mode
+ * to 0 in the Mode Register and performing a write access
+ * at any location in the SDRAM.
*/
- hsdramc1_readl(MR);
hsdramc1_writel(MR, HSDRAMC1_MODE_NORMAL);
hsdramc1_readl(MR);
- writel(0, sdram);
+ writel(0, sdram_base);
/*
* 6. Write refresh rate into SDRAMC refresh timer count
* register (refresh rate = timing between refresh cycles).
- *
- * 15.6 us is a typical value for a burst of length one
*/
- bus_hz = get_sdram_clk_rate();
- hsdramc1_writel(TR, info->refresh_period);
-
- printf("SDRAM: %u MB at address 0x%08lx\n",
- sdram_size >> 20, info->phys_addr);
-
- printf("Testing SDRAM...");
- for (i = 0; i < sdram_size / 4; i++)
- sdram[i] = i;
-
- for (i = 0; i < sdram_size / 4; i++) {
- tmp = sdram[i];
- if (tmp != i) {
- printf("FAILED at address 0x%08lx\n",
- info->phys_addr + i * 4);
- printf("SDRAM: read 0x%lx, expected 0x%lx\n", tmp, i);
- return 0;
- }
- }
-
- puts("OK\n");
+ hsdramc1_writel(TR, config->refresh_period);
+
+ if (config->data_bits == SDRAM_DATA_16BIT)
+ sdram_size = 1 << (config->row_bits + config->col_bits
+ + config->bank_bits + 1);
+ else
+ sdram_size = 1 << (config->row_bits + config->col_bits
+ + config->bank_bits + 2);
return sdram_size;
}
*/
void udelay(unsigned long usec)
{
- unsigned long now, end;
+ unsigned long cycles;
+ unsigned long base;
+ unsigned long now;
- now = sysreg_read(COUNT);
+ base = sysreg_read(COUNT);
+ cycles = ((usec * (get_tbclk() / 10000)) + 50) / 100;
- end = ((usec * (get_tbclk() / 10000)) + 50) / 100;
- end += now;
-
- while (now > end)
- now = sysreg_read(COUNT);
-
- while (now < end)
+ do {
now = sysreg_read(COUNT);
+ } while ((now - base) < cycles);
}
static int set_interrupt_handler(unsigned int nr, void (*handler)(void),
/*
- * Copyright (C) 2005-2006 Atmel Corporation
+ * Copyright (C) 2005-2008 Atmel Corporation
*
* See file CREDITS for list of people who contributed to this
* project.
* MA 02111-1307 USA
*/
#include <config.h>
+#include <asm/ptrace.h>
#include <asm/sysreg.h>
-#ifndef PART_SPECIFIC_BOOTSTRAP
-# define PART_SPECIFIC_BOOTSTRAP
-#endif
-
#define SYSREG_MMUCR_I_OFFSET 2
#define SYSREG_MMUCR_S_OFFSET 4
| SYSREG_BIT(FE) | SYSREG_BIT(RE) \
| SYSREG_BIT(IBE) | SYSREG_BIT(IEE))
- .text
+ /*
+ * To save some space, we use the same entry point for
+ * exceptions and reset. This avoids lots of alignment padding
+ * since the reset vector is always suitably aligned.
+ */
+ .section .exception.text, "ax", @progbits
.global _start
+ .global _evba
+ .type _start, @function
+ .type _evba, @function
_start:
- PART_SPECIFIC_BOOTSTRAP
+ .size _start, 0
+_evba:
+ .org 0x00
+ rjmp unknown_exception /* Unrecoverable exception */
+ .org 0x04
+ rjmp unknown_exception /* TLB multiple hit */
+ .org 0x08
+ rjmp unknown_exception /* Bus error data fetch */
+ .org 0x0c
+ rjmp unknown_exception /* Bus error instruction fetch */
+ .org 0x10
+ rjmp unknown_exception /* NMI */
+ .org 0x14
+ rjmp unknown_exception /* Instruction address */
+ .org 0x18
+ rjmp unknown_exception /* ITLB protection */
+ .org 0x1c
+ rjmp unknown_exception /* Breakpoint */
+ .org 0x20
+ rjmp unknown_exception /* Illegal opcode */
+ .org 0x24
+ rjmp unknown_exception /* Unimplemented instruction */
+ .org 0x28
+ rjmp unknown_exception /* Privilege violation */
+ .org 0x2c
+ rjmp unknown_exception /* Floating-point */
+ .org 0x30
+ rjmp unknown_exception /* Coprocessor absent */
+ .org 0x34
+ rjmp unknown_exception /* Data Address (read) */
+ .org 0x38
+ rjmp unknown_exception /* Data Address (write) */
+ .org 0x3c
+ rjmp unknown_exception /* DTLB Protection (read) */
+ .org 0x40
+ rjmp unknown_exception /* DTLB Protection (write) */
+ .org 0x44
+ rjmp unknown_exception /* DTLB Modified */
+
+ .org 0x50
+ rjmp unknown_exception /* ITLB Miss */
+ .org 0x60
+ rjmp unknown_exception /* DTLB Miss (read) */
+ .org 0x70
+ rjmp unknown_exception /* DTLB Miss (write) */
+
+ .size _evba, . - _evba
+
+ .align 2
+ .type unknown_exception, @function
+unknown_exception:
+ /* Figure out whether we're handling an exception (Exception
+ * mode) or just booting (Supervisor mode). */
+ csrfcz SYSREG_M1_OFFSET
+ brcc at32ap_cpu_bootstrap
+
+ /* This is an exception. Complain. */
+ pushm r0-r12
+ sub r8, sp, REG_R12 - REG_R0 - 4
+ mov r9, lr
+ mfsr r10, SYSREG_RAR_EX
+ mfsr r11, SYSREG_RSR_EX
+ pushm r8-r11
+ mfsr r12, SYSREG_ECR
+ mov r11, sp
+ rcall do_unknown_exception
+1: rjmp 1b
+
+ /* The COUNT/COMPARE timer interrupt handler */
+ .global timer_interrupt_handler
+ .type timer_interrupt_handler,@function
+ .align 2
+timer_interrupt_handler:
+ /*
+ * Increment timer_overflow and re-write COMPARE with 0xffffffff.
+ *
+ * We're running at interrupt level 3, so we don't need to save
+ * r8-r12 or lr to the stack.
+ */
+ lda.w r8, timer_overflow
+ ld.w r9, r8[0]
+ mov r10, -1
+ mtsr SYSREG_COMPARE, r10
+ sub r9, -1
+ st.w r8[0], r9
+ rete
+ /*
+ * CPU bootstrap after reset is handled here. SoC code may
+ * override this in case they need to initialize oscillators,
+ * etc.
+ */
+ .section .text.at32ap_cpu_bootstrap, "ax", @progbits
+ .global at32ap_cpu_bootstrap
+ .weak at32ap_cpu_bootstrap
+ .type at32ap_cpu_bootstrap, @function
+ .align 2
+at32ap_cpu_bootstrap:
/* Reset the Status Register */
mov r0, lo(SR_INIT)
orh r0, hi(SR_INIT)
lddpc pc, 1f
.align 2
-1: .long 2f
+1: .long at32ap_low_level_init
+ .size _start, . - _start
-2: lddpc sp, sp_init
+ /* Common CPU bootstrap code after oscillator/cache/etc. init */
+ .section .text.avr32ap_low_level_init, "ax", @progbits
+ .global at32ap_low_level_init
+ .type at32ap_low_level_init, @function
+ .align 2
+at32ap_low_level_init:
+ lddpc sp, sp_init
/* Initialize the GOT pointer */
lddpc r6, got_init
* Relocate the u-boot image into RAM and continue from there.
* Does not return.
*/
+ .section .text.relocate_code,"ax",@progbits
.global relocate_code
.type relocate_code,@function
relocate_code:
.align 2
got_init_reloc:
.long 3b - _GLOBAL_OFFSET_TABLE_
+
+ .size relocate_code, . - relocate_code
void write_one_tlb(int index, u32 pagemask, u32 hi, u32 low0, u32 low1)
{
- write_32bit_cp0_register(CP0_ENTRYLO0, low0);
- write_32bit_cp0_register(CP0_PAGEMASK, pagemask);
- write_32bit_cp0_register(CP0_ENTRYLO1, low1);
- write_32bit_cp0_register(CP0_ENTRYHI, hi);
- write_32bit_cp0_register(CP0_INDEX, index);
+ write_c0_entrylo0(low0);
+ write_c0_pagemask(pagemask);
+ write_c0_entrylo1(low1);
+ write_c0_entryhi(hi);
+ write_c0_index(index);
tlb_write_indexed();
}
extern unsigned long search_exception_table(unsigned long);
-#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize)
+/*
+ * End of addressable memory. This may be less than the actual
+ * amount of memory on the system if we're unable to keep all
+ * the memory mapped in.
+ */
+extern ulong get_effective_memsize(void);
+#define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize())
/*
* Trap & Exception support
mtspr IBAT1U, r0
mtspr IBAT2U, r0
mtspr IBAT3U, r0
-#if (CFG_HID2 & HID2_HBE)
+#ifdef CONFIG_HIGH_BATS
mtspr IBAT4U, r0
mtspr IBAT5U, r0
mtspr IBAT6U, r0
mtspr DBAT1U, r0
mtspr DBAT2U, r0
mtspr DBAT3U, r0
-#if (CFG_HID2 & HID2_HBE)
+#ifdef CONFIG_HIGH_BATS
mtspr DBAT4U, r0
mtspr DBAT5U, r0
mtspr DBAT6U, r0
mtspr DBAT3U, r3
isync
-#if (CFG_HID2 & HID2_HBE)
+#ifdef CONFIG_HIGH_BATS
/* IBAT 4 */
addis r4, r0, CFG_IBAT4L@h
ori r4, r4, CFG_IBAT4L@l
#include <watchdog.h>
#include <command.h>
#include <asm/cache.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
-struct cpu_type {
- char name[15];
- u32 soc_ver;
+struct cpu_type cpu_type_list [] = {
+ CPU_TYPE_ENTRY(8533, 8533),
+ CPU_TYPE_ENTRY(8533, 8533_E),
+ CPU_TYPE_ENTRY(8540, 8540),
+ CPU_TYPE_ENTRY(8541, 8541),
+ CPU_TYPE_ENTRY(8541, 8541_E),
+ CPU_TYPE_ENTRY(8543, 8543),
+ CPU_TYPE_ENTRY(8543, 8543_E),
+ CPU_TYPE_ENTRY(8544, 8544),
+ CPU_TYPE_ENTRY(8544, 8544_E),
+ CPU_TYPE_ENTRY(8545, 8545),
+ CPU_TYPE_ENTRY(8545, 8545_E),
+ CPU_TYPE_ENTRY(8547, 8547_E),
+ CPU_TYPE_ENTRY(8548, 8548),
+ CPU_TYPE_ENTRY(8548, 8548_E),
+ CPU_TYPE_ENTRY(8555, 8555),
+ CPU_TYPE_ENTRY(8555, 8555_E),
+ CPU_TYPE_ENTRY(8560, 8560),
+ CPU_TYPE_ENTRY(8567, 8567),
+ CPU_TYPE_ENTRY(8567, 8567_E),
+ CPU_TYPE_ENTRY(8568, 8568),
+ CPU_TYPE_ENTRY(8568, 8568_E),
+ CPU_TYPE_ENTRY(8572, 8572),
+ CPU_TYPE_ENTRY(8572, 8572_E),
};
-#define CPU_TYPE_ENTRY(x) {#x, SVR_##x}
+struct cpu_type *identify_cpu(uint ver)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++)
+ if (cpu_type_list[i].soc_ver == ver)
+ return &cpu_type_list[i];
-struct cpu_type cpu_type_list [] = {
- CPU_TYPE_ENTRY(8533),
- CPU_TYPE_ENTRY(8533_E),
- CPU_TYPE_ENTRY(8540),
- CPU_TYPE_ENTRY(8541),
- CPU_TYPE_ENTRY(8541_E),
- CPU_TYPE_ENTRY(8543),
- CPU_TYPE_ENTRY(8543_E),
- CPU_TYPE_ENTRY(8544),
- CPU_TYPE_ENTRY(8544_E),
- CPU_TYPE_ENTRY(8545),
- CPU_TYPE_ENTRY(8545_E),
- CPU_TYPE_ENTRY(8547_E),
- CPU_TYPE_ENTRY(8548),
- CPU_TYPE_ENTRY(8548_E),
- CPU_TYPE_ENTRY(8555),
- CPU_TYPE_ENTRY(8555_E),
- CPU_TYPE_ENTRY(8560),
- CPU_TYPE_ENTRY(8567),
- CPU_TYPE_ENTRY(8567_E),
- CPU_TYPE_ENTRY(8568),
- CPU_TYPE_ENTRY(8568_E),
- CPU_TYPE_ENTRY(8572),
- CPU_TYPE_ENTRY(8572_E),
-};
+ return NULL;
+}
int checkcpu (void)
{
uint fam;
uint ver;
uint major, minor;
- int i;
- u32 ddr_ratio;
+ struct cpu_type *cpu;
+#ifdef CONFIG_DDR_CLK_FREQ
volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ u32 ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+#else
+ u32 ddr_ratio = 0;
+#endif
svr = get_svr();
ver = SVR_SOC_VER(svr);
puts("CPU: ");
- for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++)
- if (cpu_type_list[i].soc_ver == ver) {
- puts(cpu_type_list[i].name);
- break;
- }
+ cpu = identify_cpu(ver);
+ if (cpu) {
+ puts(cpu->name);
- if (i == ARRAY_SIZE(cpu_type_list))
+ if (svr & 0x80000)
+ puts("E");
+ } else {
puts("Unknown");
+ }
printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
puts("Clock Configuration:\n");
printf(" CPU:%4lu MHz, ", DIV_ROUND_UP(sysinfo.freqProcessor,1000000));
printf("CCB:%4lu MHz,\n", DIV_ROUND_UP(sysinfo.freqSystemBus,1000000));
- ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+
switch (ddr_ratio) {
case 0x0:
printf(" DDR:%4lu MHz (%lu MT/s data rate), ",
}
#ifdef CONFIG_CPM2
- printf("CPM: %lu Mhz\n", sysinfo.freqSystemBus / 1000000);
+ printf("CPM: %lu Mhz\n", sysinfo.freqSystemBus / 1000000);
#endif
puts("L1: D-cache 32 kB enabled\n I-cache 32 kB enabled\n");
return dma_check();
}
#endif
+/*
+ * Configures a UPM. Currently, the loop fields in MxMR (RLF, WLF and TLF)
+ * are hardcoded as "1"."size" is the number or entries, not a sizeof.
+ */
+void upmconfig (uint upm, uint * table, uint size)
+{
+ int i, mdr, mad, old_mad = 0;
+ volatile u32 *mxmr;
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+ int loopval = 0x00004440;
+ volatile u32 *brp,*orp;
+ volatile u8* dummy = NULL;
+ int upmmask;
+
+ switch (upm) {
+ case UPMA:
+ mxmr = &lbc->mamr;
+ upmmask = BR_MS_UPMA;
+ break;
+ case UPMB:
+ mxmr = &lbc->mbmr;
+ upmmask = BR_MS_UPMB;
+ break;
+ case UPMC:
+ mxmr = &lbc->mcmr;
+ upmmask = BR_MS_UPMC;
+ break;
+ default:
+ printf("%s: Bad UPM index %d to configure\n", __FUNCTION__, upm);
+ hang();
+ }
+
+ /* Find the address for the dummy write transaction */
+ for (brp = &lbc->br0, orp = &lbc->or0, i = 0; i < 8;
+ i++, brp += 2, orp += 2) {
+
+ /* Look for a valid BR with selected UPM */
+ if ((in_be32(brp) & (BR_V | upmmask)) == (BR_V | upmmask)) {
+ dummy = (volatile u8*)(in_be32(brp) >> BR_BA_SHIFT);
+ break;
+ }
+ }
+
+ if (i == 8) {
+ printf("Error: %s() could not find matching BR\n", __FUNCTION__);
+ hang();
+ }
+
+ for (i = 0; i < size; i++) {
+ /* 1 */
+ out_be32(mxmr, loopval | 0x10000000 | i); /* OP_WRITE */
+ /* 2 */
+ out_be32(&lbc->mdr, table[i]);
+ /* 3 */
+ mdr = in_be32(&lbc->mdr);
+ /* 4 */
+ *(volatile u8 *)dummy = 0;
+ /* 5 */
+ do {
+ mad = in_be32(mxmr) & 0x3f;
+ } while (mad <= old_mad && !(!mad && i == (size-1)));
+ old_mad = mad;
+ }
+ out_be32(mxmr, loopval); /* OP_NORMAL */
+}
}
#endif
+ /* Pointer is writable since we allocated a register for it */
+ gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
+
+ /* Clear initial global data */
+ memset ((void *) gd, 0, sizeof (gd_t));
+
init_laws();
invalidate_tlb(0);
init_tlbs();
disable_tlb(14);
disable_tlb(15);
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
-
- /* Clear initial global data */
- memset ((void *) gd, 0, sizeof (gd_t));
-
#ifdef CONFIG_CPM2
config_8560_ioports((ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR);
#endif
int cpu_init_r(void)
{
-#ifdef CONFIG_CLEAR_LAW0
-#ifdef CONFIG_FSL_LAW
- disable_law(0);
-#else
- volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
-
- /* clear alternate boot location LAW (used for sdram, or ddr bank) */
- ecm->lawar0 = 0;
-#endif
-#endif
+ puts ("L2: ");
#if defined(CONFIG_L2_CACHE)
volatile ccsr_l2cache_t *l2cache = (void *)CFG_MPC85xx_L2_ADDR;
case 0x20000000:
if (ver == SVR_8548 || ver == SVR_8548_E ||
ver == SVR_8544 || ver == SVR_8568_E) {
- printf ("L2 cache 512KB:");
+ puts ("512 KB ");
/* set L2E=1, L2I=1, & L2SRAM=0 */
cache_ctl = 0xc0000000;
} else {
- printf ("L2 cache 256KB:");
+ puts("256 KB ");
/* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
cache_ctl = 0xc8000000;
}
break;
case 0x10000000:
- printf ("L2 cache 256KB:");
+ puts("256 KB ");
if (ver == SVR_8544 || ver == SVR_8544_E) {
cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
}
case 0x30000000:
case 0x00000000:
default:
- printf ("L2 cache unknown size (0x%08x)\n", cache_ctl);
+ printf(" unknown size (0x%08x)\n", cache_ctl);
return -1;
}
if (l2cache->l2ctl & 0x80000000) {
- printf(" already enabled.");
+ puts("already enabled");
l2srbar = l2cache->l2srbar0;
#ifdef CFG_INIT_L2_ADDR
if (l2cache->l2ctl & 0x00010000 && l2srbar >= CFG_FLASH_BASE) {
l2srbar = CFG_INIT_L2_ADDR;
l2cache->l2srbar0 = l2srbar;
- printf(" Moving to 0x%08x", CFG_INIT_L2_ADDR);
+ printf("moving to 0x%08x", CFG_INIT_L2_ADDR);
}
#endif /* CFG_INIT_L2_ADDR */
puts("\n");
asm("msync;isync");
l2cache->l2ctl = cache_ctl; /* invalidate & enable */
asm("msync;isync");
- printf(" enabled\n");
+ puts("enabled\n");
}
#else
- printf("L2 cache: disabled\n");
+ puts("disabled\n");
#endif
#ifdef CONFIG_QE
uint qe_base = CFG_IMMR + 0x00080000; /* QE immr base */
#include <common.h>
#include <libfdt.h>
#include <fdt_support.h>
+#include <asm/processor.h>
extern void ft_qe_setup(void *blob);
#ifdef CONFIG_MP
}
#endif
+#ifdef CONFIG_L2_CACHE
+/* return size in kilobytes */
+static inline u32 l2cache_size(void)
+{
+ volatile ccsr_l2cache_t *l2cache = (void *)CFG_MPC85xx_L2_ADDR;
+ volatile u32 l2siz_field = (l2cache->l2ctl >> 28) & 0x3;
+ u32 ver = SVR_SOC_VER(get_svr());
+
+ switch (l2siz_field) {
+ case 0x0:
+ break;
+ case 0x1:
+ if (ver == SVR_8540 || ver == SVR_8560 ||
+ ver == SVR_8541 || ver == SVR_8541_E ||
+ ver == SVR_8555 || ver == SVR_8555_E)
+ return 128;
+ else
+ return 256;
+ break;
+ case 0x2:
+ if (ver == SVR_8540 || ver == SVR_8560 ||
+ ver == SVR_8541 || ver == SVR_8541_E ||
+ ver == SVR_8555 || ver == SVR_8555_E)
+ return 256;
+ else
+ return 512;
+ break;
+ case 0x3:
+ return 1024;
+ break;
+ }
+
+ return 0;
+}
+
+static inline void ft_fixup_l2cache(void *blob)
+{
+ int len, off;
+ u32 *ph;
+ struct cpu_type *cpu = identify_cpu(SVR_SOC_VER(get_svr()));
+ char compat_buf[38];
+
+ const u32 line_size = 32;
+ const u32 num_ways = 8;
+ const u32 size = l2cache_size() * 1024;
+ const u32 num_sets = size / (line_size * num_ways);
+
+ off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+ if (off < 0) {
+ debug("no cpu node fount\n");
+ return;
+ }
+
+ ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0);
+
+ if (ph == NULL) {
+ debug("no next-level-cache property\n");
+ return ;
+ }
+
+ off = fdt_node_offset_by_phandle(blob, *ph);
+ if (off < 0) {
+ printf("%s: %s\n", __func__, fdt_strerror(off));
+ return ;
+ }
+
+ if (cpu) {
+ len = sprintf(compat_buf, "fsl,mpc%s-l2-cache-controller",
+ cpu->name);
+ sprintf(&compat_buf[len + 1], "cache");
+ }
+ fdt_setprop(blob, off, "cache-unified", NULL, 0);
+ fdt_setprop_cell(blob, off, "cache-block-size", line_size);
+ fdt_setprop_cell(blob, off, "cache-line-size", line_size);
+ fdt_setprop_cell(blob, off, "cache-size", size);
+ fdt_setprop_cell(blob, off, "cache-sets", num_sets);
+ fdt_setprop_cell(blob, off, "cache-level", 2);
+ fdt_setprop(blob, off, "compatible", compat_buf, sizeof(compat_buf));
+}
+#else
+#define ft_fixup_l2cache(x)
+#endif
+
+static inline void ft_fixup_cache(void *blob)
+{
+ int off;
+
+ off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+
+ while (off != -FDT_ERR_NOTFOUND) {
+ u32 l1cfg0 = mfspr(SPRN_L1CFG0);
+ u32 l1cfg1 = mfspr(SPRN_L1CFG1);
+ u32 isize, iline_size, inum_sets, inum_ways;
+ u32 dsize, dline_size, dnum_sets, dnum_ways;
+
+ /* d-side config */
+ dsize = (l1cfg0 & 0x7ff) * 1024;
+ dnum_ways = ((l1cfg0 >> 11) & 0xff) + 1;
+ dline_size = (((l1cfg0 >> 23) & 0x3) + 1) * 32;
+ dnum_sets = dsize / (dline_size * dnum_ways);
+
+ fdt_setprop_cell(blob, off, "d-cache-block-size", dline_size);
+ fdt_setprop_cell(blob, off, "d-cache-line-size", dline_size);
+ fdt_setprop_cell(blob, off, "d-cache-size", dsize);
+ fdt_setprop_cell(blob, off, "d-cache-sets", dnum_sets);
+
+ /* i-side config */
+ isize = (l1cfg1 & 0x7ff) * 1024;
+ inum_ways = ((l1cfg1 >> 11) & 0xff) + 1;
+ iline_size = (((l1cfg1 >> 23) & 0x3) + 1) * 32;
+ inum_sets = isize / (iline_size * inum_ways);
+
+ fdt_setprop_cell(blob, off, "i-cache-block-size", iline_size);
+ fdt_setprop_cell(blob, off, "i-cache-line-size", iline_size);
+ fdt_setprop_cell(blob, off, "i-cache-size", isize);
+ fdt_setprop_cell(blob, off, "i-cache-sets", inum_sets);
+
+ off = fdt_node_offset_by_prop_value(blob, off,
+ "device_type", "cpu", 4);
+ }
+
+ ft_fixup_l2cache(blob);
+}
+
+
void ft_cpu_setup(void *blob, bd_t *bd)
{
#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
#ifdef CONFIG_MP
ft_fixup_cpu(blob, (u64)bd->bi_memstart + (u64)bd->bi_memsize);
#endif
+
+ ft_fixup_cache(blob);
}
*/
#ifdef CONFIG_FSL_LAW
- set_law(1, CFG_DDR_SDRAM_BASE, law_size, LAW_TRGT_IF_DDR);
+ set_next_law(CFG_DDR_SDRAM_BASE, law_size, LAW_TRGT_IF_DDR);
#endif
/*
extern unsigned long search_exception_table(unsigned long);
/*
- * End of memory as shown by board info and determined by DDR setup.
+ * End of addressable memory. This may be less than the actual
+ * amount of memory on the system if we're unable to keep all
+ * the memory mapped in.
*/
-#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize)
-
+extern ulong get_effective_memsize(void);
+#define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize())
static __inline__ void set_tsr(unsigned long val)
{
#include <watchdog.h>
#include <command.h>
#include <asm/cache.h>
+#include <asm/mmu.h>
#include <mpc86xx.h>
#include <asm/fsl_law.h>
/*
* Print out the state of various machine registers.
- * Currently prints out LAWs and BR0/OR0
+ * Currently prints out LAWs, BR0/OR0, and BATs
*/
void mpc86xx_reginfo(void)
{
immap_t *immap = (immap_t *)CFG_IMMR;
ccsr_lbc_t *lbc = &immap->im_lbc;
+ print_bats();
print_laws();
printf ("Local Bus Controller Registers\n"
*/
int cpu_init_r(void)
{
-#ifdef CONFIG_FSL_LAW
- disable_law(0);
-#endif
return 0;
}
* Set up LAWBAR for DDR 1 space.
*/
#ifdef CONFIG_FSL_LAW
- set_law(1, CFG_DDR_SDRAM_BASE, law_size_interleaved, LAW_TRGT_IF_DDR_INTRLV);
+ set_next_law(CFG_DDR_SDRAM_BASE, law_size_interleaved, LAW_TRGT_IF_DDR_INTRLV);
#endif
debug("Interleaved memory size is 0x%08lx\n", memsize_total);
* Set up LAWBAR for DDR 1 space.
*/
#ifdef CONFIG_FSL_LAW
- set_law(1, CFG_DDR_SDRAM_BASE, law_size_ddr1, LAW_TRGT_IF_DDR_1);
+ set_next_law(CFG_DDR_SDRAM_BASE, law_size_ddr1, LAW_TRGT_IF_DDR_1);
#endif
}
* Set up LAWBAR for DDR 2 space.
*/
#ifdef CONFIG_FSL_LAW
- set_law(8,
+ set_next_law(
(ddr1_enabled ? (memsize_ddr1 * 1024 * 1024) : CFG_DDR_SDRAM_BASE),
law_size_ddr2, LAW_TRGT_IF_DDR_2);
#endif
/* Returns 0 if exception not found and fixup otherwise. */
extern unsigned long search_exception_table(unsigned long);
-#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize)
+/*
+ * End of addressable memory. This may be less than the actual
+ * amount of memory on the system if we're unable to keep all
+ * the memory mapped in.
+ */
+extern ulong get_effective_memsize(void);
+#define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize())
/*
* Trap & Exception support
return hex_digit[i];
}
-static void memdump (void *pv, int num)
+static void memdump (const void *pv, int num)
{
int i;
- unsigned char *pc = (unsigned char *) pv;
+ const unsigned char *pc = (const unsigned char *) pv;
for (i = 0; i < num; i++)
printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
#endif /* DEBUG */
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct spi_slave *slave;
+
+ if (!spi_cs_is_valid(bus, cs))
+ return NULL;
+
+ slave = malloc(sizeof(struct spi_slave));
+ if (!slave)
+ return NULL;
+
+ slave->bus = bus;
+ slave->cs = cs;
+
+ /* TODO: Add support for different modes and speeds */
+
+ return slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ free(slave);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+
+}
+
/*
* SPI transfer:
*
* See include/spi.h and http://www.altera.com/literature/ds/ds_nios_spi.pdf
* for more informations.
*/
-int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
+int spi_xfer(struct spi_slave *slave, int bitlen, const void *dout,
+ void *din, unsigned long flags)
{
+ const u8 *txd = dout;
+ u8 *rxd = din;
int j;
- DPRINT(("spi_xfer: chipsel %08X dout %08X din %08X bitlen %d\n",
- (int)chipsel, *(uint *)dout, *(uint *)din, bitlen));
+ DPRINT(("spi_xfer: slave %u:%u dout %08X din %08X bitlen %d\n",
+ slave->bus, slave->cs, *(uint *)dout, *(uint *)din, bitlen));
- memdump((void*)dout, (bitlen + 7) / 8);
+ memdump(dout, (bitlen + 7) / 8);
- if(chipsel != NULL) {
- chipsel(1); /* select the target chip */
- }
+ if (flags & SPI_XFER_BEGIN)
+ spi_cs_activate(slave);
- if (bitlen > CFG_NIOS_SPIBITS) { /* leave chip select active */
+ if (!(flags & SPI_XFER_END) || bitlen > CFG_NIOS_SPIBITS) {
+ /* leave chip select active */
spi->control |= NIOS_SPI_SSO;
}
while ((spi->status & NIOS_SPI_TRDY) == 0)
;
- spi->txdata = (unsigned)(dout[j]);
+ spi->txdata = (unsigned)(txd[j]);
while ((spi->status & NIOS_SPI_RRDY) == 0)
;
- din[j] = (unsigned char)(spi->rxdata & 0xff);
+ rxd[j] = (unsigned char)(spi->rxdata & 0xff);
#elif (CFG_NIOS_SPIBITS == 16)
j++, j++) {
while ((spi->status & NIOS_SPI_TRDY) == 0)
;
if ((j+1) < ((bitlen + 7) / 8))
- spi->txdata = (unsigned)((dout[j] << 8) | dout[j+1]);
+ spi->txdata = (unsigned)((txd[j] << 8) | txd[j+1]);
else
- spi->txdata = (unsigned)(dout[j] << 8);
+ spi->txdata = (unsigned)(txd[j] << 8);
while ((spi->status & NIOS_SPI_RRDY) == 0)
;
- din[j] = (unsigned char)((spi->rxdata >> 8) & 0xff);
+ rxd[j] = (unsigned char)((spi->rxdata >> 8) & 0xff);
if ((j+1) < ((bitlen + 7) / 8))
- din[j+1] = (unsigned char)(spi->rxdata & 0xff);
+ rxd[j+1] = (unsigned char)(spi->rxdata & 0xff);
#else
#error "*** unsupported value of CFG_NIOS_SPIBITS ***"
}
- if (bitlen > CFG_NIOS_SPIBITS) {
+ if (bitlen > CFG_NIOS_SPIBITS && (flags & SPI_XFER_END)) {
spi->control &= ~NIOS_SPI_SSO;
}
- if(chipsel != NULL) {
- chipsel(0); /* deselect the target chip */
- }
+ if (flags & SPI_XFER_END)
+ spi_cs_deactivate(slave);
- memdump((void*)din, (bitlen + 7) / 8);
+ memdump(din, (bitlen + 7) / 8);
return 0;
}
lbaint_t lba512;
#endif
- switch (dev_desc->type) {
+ switch (dev_desc->if_type) {
case IF_TYPE_SCSI:
printf ("(%d:%d) Vendor: %s Prod.: %s Rev: %s\n",
dev_desc->target,dev_desc->lun,
dev_desc->revision,
dev_desc->product);
break;
- case DEV_TYPE_UNKNOWN:
+ case IF_TYPE_UNKNOWN:
default:
puts ("not available\n");
return;
--- /dev/null
+Matrix Vision mvBlueLYNX-M7 (mvBL-M7)
+-------------------------------------
+
+1. Board Description
+
+ The mvBL-M7 is a 120x120mm single board computing platform
+ with strong focus on stereo image processing applications.
+
+ Power Supply is either VDC 12-48V or Pover over Ethernet (PoE)
+ on any port (requires add-on board).
+
+2 System Components
+
+2.1 CPU
+ Freescale MPC8343VRAGDB CPU running at 400MHz core and 266MHz csb.
+ 512MByte DDR-II memory @ 133MHz.
+ 8 MByte Nor Flash on local bus.
+ 2 Vitesse VSC8601 RGMII ethernet Phys.
+ 1 USB host controller over ULPI I/F.
+ 2 serial ports. Console running on ttyS0 @ 115200 8N1.
+ 1 SD-Card slot connected to SPI.
+ System configuration (HRCW) is taken from I2C EEPROM.
+
+2.2 PCI
+ A miniPCI Type-III socket is present. PCI clock fixed at 66MHz.
+
+2.3 FPGA
+ Altera Cyclone-II EP2C20/35 with PCI DMA engines.
+ Connects to dual Matrix Vision specific CCD/CMOS sensor interfaces.
+ Utilizes another 256MB DDR-II memory and 32-128MB Nand Flash.
+
+2.3.1 I/O @ FPGA
+ 2x8 Outputs : Infineon High-Side Switches to Main Supply.
+ 2x8 Inputs : Programmable input threshold + trigger capabilities
+ 2 dedicated flash interfaces for illuminator boards.
+ Cross trigger for chaining several boards.
+
+2.4 I2C
+ Bus1:
+ MAX5381 DAC @ 0x60 for 1st digital input threshold.
+ LM75 @ 0x90 for temperature monitoring.
+ EEPROM @ 0xA0 for system setup (HRCW etc.) + vendor specifics.
+ 1st image sensor interface (slave adresses depend on sensor)
+ Bus2:
+ MAX5381 DAC @ 0x60 for 2nd digital input threshold.
+ 2nd image sensor interface (slave adresses depend on sensor)
+
+3 Flash layout.
+
+ reset vector is 0xFFF00100, i.e. "HIGHBOOT".
+
+ FF800000 environment
+ FF802000 redundant environment
+ FF804000 u-boot script image
+ FF806000 redundant u-boot script image
+ FF808000 device tree blob
+ FF80A000 redundant device tree blob
+ FF80C000 tbd.
+ FF80E000 tbd.
+ FF810000 kernel
+ FFC00000 root FS
+ FFF00000 u-boot
+ FFF80000 FPGA raw bit file
+
+ mtd partitions are propagated to linux kernel via device tree blob.
+
+4 Booting
+
+ On startup the bootscript @ FF804000 is executed. This script can be
+ exchanged easily. Default boot mode is "boot from flash", i.e. system
+ works stand-alone.
+
+ This behaviour depends on some environment variables :
+
+ "netboot" : yes ->try dhcp/bootp and boot from network.
+ A "dhcp_client_id" and "dhcp_vendor-class-identifier" can be used for
+ DHCP server configuration, e.g. to provide different images to
+ different devices.
+
+ During netboot the system tries to get 3 image files:
+ 1. Kernel - name + data is given during BOOTP.
+ 2. Initrd - name is stored in "initrd_name"
+ 3. device tree blob - name is stored in "dtb_name"
+ Fallback files are the flash versions.
+
int dlen;
uchar data[2];
+#ifdef CONFIG_DTT_AD7414
+ /*
+ * On AD7414 the first value upon bootup is not read correctly.
+ * This is most likely because of the 800ms update time of the
+ * temp register in normal update mode. To get current values
+ * each time we issue the "dtt" command including upon powerup
+ * we switch into one-short mode.
+ *
+ * Issue one-shot mode command
+ */
+ dtt_write(sensor, DTT_CONFIG, 0x64);
+#endif
+
/*
* Validate 'reg' param
*/
#error CONFIG_PS2SERIAL must be in 1 ... 6
#endif
-#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+ defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
#if CONFIG_PS2SERIAL == 1
#define COM_BASE (CFG_CCSRBAR+0x4500)
static void ps2ser_interrupt(void *dev_id);
extern struct serial_state rs_table[]; /* in serial.c */
-#if !defined(CONFIG_MPC5xxx) && !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8541) && !defined(CONFIG_MPC8555)
+#if !defined(CONFIG_MPC5xxx) && !defined(CONFIG_MPC8540) && \
+ !defined(CONFIG_MPC8541) && !defined(CONFIG_MPC8548) && \
+ !defined(CONFIG_MPC8555)
static struct serial_state *state;
#endif
return (0);
}
-#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+ defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
int ps2ser_init(void)
{
NS16550_t com_port = (NS16550_t)COM_BASE;
{
#ifdef CONFIG_MPC5xxx
volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+ defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
NS16550_t com_port = (NS16550_t)COM_BASE;
#endif
#ifdef DEBUG
while (!(psc->psc_status & PSC_SR_TXRDY));
psc->psc_buffer_8 = chr;
-#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+ defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
while ((com_port->lsr & LSR_THRE) == 0);
com_port->thr = chr;
#else
{
#ifdef CONFIG_MPC5xxx
volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+ defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
NS16550_t com_port = (NS16550_t)COM_BASE;
#endif
int res = -1;
if (psc->psc_status & PSC_SR_RXRDY) {
res = (psc->psc_buffer_8);
}
-#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+ defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
if (com_port->lsr & LSR_DR) {
res = com_port->rbr;
}
{
#ifdef CONFIG_MPC5xxx
volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+ defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
NS16550_t com_port = (NS16550_t)COM_BASE;
#endif
int chr;
chr = ps2ser_getc_hw();
#ifdef CONFIG_MPC5xxx
status = psc->psc_status;
-#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+ defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
status = com_port->lsr;
#else
status = ps2ser_in(UART_IIR);
}
#ifdef CONFIG_MPC5xxx
} while (status & PSC_SR_RXRDY);
-#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+ defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
} while (status & LSR_DR);
#else
} while (status & UART_IIR_RDI);
#include <asm/fsl_law.h>
#include <asm/io.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#define LAWAR_EN 0x80000000
-#define FSL_HW_NUM_LAWS 10 /* number of LAWs in the hw implementation */
+/* number of LAWs in the hw implementation */
+#if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+ defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555)
+#define FSL_HW_NUM_LAWS 8
+#elif defined(CONFIG_MPC8548) || defined(CONFIG_MPC8544) || \
+ defined(CONFIG_MPC8568) || \
+ defined(CONFIG_MPC8641) || defined(CONFIG_MPC8610)
+#define FSL_HW_NUM_LAWS 10
+#elif defined(CONFIG_MPC8572)
+#define FSL_HW_NUM_LAWS 12
+#else
+#error FSL_HW_NUM_LAWS not defined for this platform
+#endif
void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
{
volatile u32 *lawbar = base + 8 * idx;
volatile u32 *lawar = base + 8 * idx + 2;
+ gd->used_laws |= (1 << idx);
+
out_be32(lawbar, addr >> 12);
out_be32(lawar, LAWAR_EN | ((u32)id << 20) | (u32)sz);
return ;
}
+int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
+{
+ u32 idx = ffz(gd->used_laws);
+
+ if (idx >= FSL_HW_NUM_LAWS)
+ return -1;
+
+ set_law(idx, addr, sz, id);
+
+ return idx;
+}
+
+int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
+{
+ u32 idx;
+
+ /* we have no LAWs free */
+ if (gd->used_laws == -1)
+ return -1;
+
+ /* grab the last free law */
+ idx = __ilog2(~(gd->used_laws));
+
+ if (idx >= FSL_HW_NUM_LAWS)
+ return -1;
+
+ set_law(idx, addr, sz, id);
+
+ return idx;
+}
+
void disable_law(u8 idx)
{
volatile u32 *base = (volatile u32 *)(CFG_IMMR + 0xc08);
volatile u32 *lawbar = base + 8 * idx;
volatile u32 *lawar = base + 8 * idx + 2;
+ gd->used_laws &= ~(1 << idx);
+
out_be32(lawar, 0);
out_be32(lawbar, 0);
void init_laws(void)
{
int i;
- u8 law_idx = 0;
- for (i = 0; i < num_law_entries; i++) {
- if (law_table[i].index != -1)
- law_idx = law_table[i].index;
+ gd->used_laws = ~((1 << FSL_HW_NUM_LAWS) - 1);
- set_law(law_idx++, law_table[i].addr,
- law_table[i].size, law_table[i].trgt_id);
+ for (i = 0; i < num_law_entries; i++) {
+ if (law_table[i].index == -1)
+ set_next_law(law_table[i].addr, law_table[i].size,
+ law_table[i].trgt_id);
+ else
+ set_law(law_table[i].index, law_table[i].addr,
+ law_table[i].size, law_table[i].trgt_id);
}
return ;
int erase_region_count;
struct cfi_qry qry;
+ memset(&qry, 0, sizeof(qry));
+
info->ext_addr = 0;
info->cfi_version = 0;
#ifdef CFG_FLASH_PROTECTION
#include <linux/mtd/fsl_upm.h>
#include <nand.h>
-#define FSL_UPM_MxMR_OP_NO (0 << 28) /* normal operation */
-#define FSL_UPM_MxMR_OP_WA (1 << 28) /* write array */
-#define FSL_UPM_MxMR_OP_RA (2 << 28) /* read array */
-#define FSL_UPM_MxMR_OP_RP (3 << 28) /* run pattern */
+static int fsl_upm_in_pattern;
static void fsl_upm_start_pattern(struct fsl_upm *upm, u32 pat_offset)
{
- out_be32(upm->mxmr, FSL_UPM_MxMR_OP_RP | pat_offset);
+ clrsetbits_be32(upm->mxmr, MxMR_MAD_MSK, MxMR_OP_RUNP | pat_offset);
}
static void fsl_upm_end_pattern(struct fsl_upm *upm)
{
- out_be32(upm->mxmr, FSL_UPM_MxMR_OP_NO);
- while (in_be32(upm->mxmr) != FSL_UPM_MxMR_OP_NO)
+ clrbits_be32(upm->mxmr, MxMR_OP_RUNP);
+
+ while (in_be32(upm->mxmr) & MxMR_OP_RUNP)
eieio();
}
static void fsl_upm_run_pattern(struct fsl_upm *upm, int width, u32 cmd)
{
- out_be32(upm->mar, cmd << (32 - width * 8));
- out_8(upm->io_addr, 0x0);
-}
-
-static void fsl_upm_setup(struct fsl_upm *upm)
-{
- int i;
-
- /* write upm array */
- out_be32(upm->mxmr, FSL_UPM_MxMR_OP_WA);
-
- for (i = 0; i < 64; i++) {
- out_be32(upm->mdr, upm->array[i]);
+ out_be32(upm->mar, cmd << (32 - width));
+ switch (width) {
+ case 8:
out_8(upm->io_addr, 0x0);
+ break;
+ case 16:
+ out_be16(upm->io_addr, 0x0);
+ break;
+ case 32:
+ out_be32(upm->io_addr, 0x0);
+ break;
}
-
- /* normal operation */
- out_be32(upm->mxmr, FSL_UPM_MxMR_OP_NO);
- while (in_be32(upm->mxmr) != FSL_UPM_MxMR_OP_NO)
- eieio();
}
-static void fun_cmdfunc(struct mtd_info *mtd, unsigned command, int column,
- int page_addr)
+static void nand_hwcontrol (struct mtd_info *mtd, int cmd)
{
struct nand_chip *chip = mtd->priv;
struct fsl_upm_nand *fun = chip->priv;
- fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset);
-
- if (command == NAND_CMD_SEQIN) {
- int readcmd;
-
- if (column >= mtd->oobblock) {
- /* OOB area */
- column -= mtd->oobblock;
- readcmd = NAND_CMD_READOOB;
- } else if (column < 256) {
- /* First 256 bytes --> READ0 */
- readcmd = NAND_CMD_READ0;
- } else {
- column -= 256;
- readcmd = NAND_CMD_READ1;
- }
- fsl_upm_run_pattern(&fun->upm, fun->width, readcmd);
+ switch (cmd) {
+ case NAND_CTL_SETCLE:
+ fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset);
+ fsl_upm_in_pattern++;
+ break;
+ case NAND_CTL_SETALE:
+ fsl_upm_start_pattern(&fun->upm, fun->upm_addr_offset);
+ fsl_upm_in_pattern++;
+ break;
+ case NAND_CTL_CLRCLE:
+ case NAND_CTL_CLRALE:
+ fsl_upm_end_pattern(&fun->upm);
+ fsl_upm_in_pattern--;
+ break;
}
+}
- fsl_upm_run_pattern(&fun->upm, fun->width, command);
-
- fsl_upm_end_pattern(&fun->upm);
-
- fsl_upm_start_pattern(&fun->upm, fun->upm_addr_offset);
-
- if (column != -1)
- fsl_upm_run_pattern(&fun->upm, fun->width, column);
+static void nand_write_byte(struct mtd_info *mtd, u_char byte)
+{
+ struct nand_chip *chip = mtd->priv;
- if (page_addr != -1) {
- fsl_upm_run_pattern(&fun->upm, fun->width, page_addr);
- fsl_upm_run_pattern(&fun->upm, fun->width,
- (page_addr >> 8) & 0xFF);
- if (chip->chipsize > (32 << 20)) {
- fsl_upm_run_pattern(&fun->upm, fun->width,
- (page_addr >> 16) & 0x0f);
- }
- }
+ if (fsl_upm_in_pattern) {
+ struct fsl_upm_nand *fun = chip->priv;
- fsl_upm_end_pattern(&fun->upm);
+ fsl_upm_run_pattern(&fun->upm, fun->width, byte);
- if (fun->wait_pattern) {
/*
* Some boards/chips needs this. At least on MPC8360E-RDK we
* need it. Probably weird chip, because I don't see any need
* for this on MPC8555E + Samsung K9F1G08U0A. Usually here are
* 0-2 unexpected busy states per block read.
*/
- while (!fun->dev_ready())
- debug("unexpected busy state\n");
+ if (fun->wait_pattern) {
+ while (!fun->dev_ready())
+ debug("unexpected busy state\n");
+ }
+ } else {
+ out_8(chip->IO_ADDR_W, byte);
}
}
-static void nand_write_byte(struct mtd_info *mtd, u_char byte)
-{
- struct nand_chip *chip = mtd->priv;
-
- out_8(chip->IO_ADDR_W, byte);
-}
-
static u8 nand_read_byte(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
return 0;
}
-static void nand_hwcontrol(struct mtd_info *mtd, int cmd)
-{
-}
-
static int nand_dev_ready(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun)
{
- /* yet only 8 bit accessors implemented */
- if (fun->width != 1)
+ if (fun->width != 8 && fun->width != 16 && fun->width != 32)
return -ENOSYS;
- fsl_upm_setup(&fun->upm);
-
chip->priv = fun;
chip->chip_delay = fun->chip_delay;
chip->eccmode = NAND_ECC_SOFT;
- chip->cmdfunc = fun_cmdfunc;
chip->hwcontrol = nand_hwcontrol;
chip->read_byte = nand_read_byte;
chip->read_buf = nand_read_buf;
chip->write_byte = nand_write_byte;
chip->write_buf = nand_write_buf;
chip->verify_buf = nand_verify_buf;
- chip->dev_ready = nand_dev_ready;
+ if (fun->dev_ready)
+ chip->dev_ready = nand_dev_ready;
return 0;
}
.oobfree = { {2, 38} }
};
-/* This is used for padding purposes in nand_write_oob */
-static u_char ffchars[] = {
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+static struct nand_oobinfo nand_oob_128 = {
+ .useecc = MTD_NANDECC_AUTOPLACE,
+ .eccbytes = 48,
+ .eccpos = {
+ 80, 81, 82, 83, 84, 85, 86, 87,
+ 88, 89, 90, 91, 92, 93, 94, 95,
+ 96, 97, 98, 99, 100, 101, 102, 103,
+ 104, 105, 106, 107, 108, 109, 110, 111,
+ 112, 113, 114, 115, 116, 117, 118, 119,
+ 120, 121, 122, 123, 124, 125, 126, 127},
+ .oobfree = { {2, 78} }
};
+/* This is used for padding purposes in nand_write_oob */
+static u_char *ffchars;
+
/*
* NAND low-level MTD interface functions
*/
{
struct nand_chip *this = mtd->priv;
this->select_chip(mtd, -1); /* De-select the NAND device */
+ if (ffchars) {
+ kfree(ffchars);
+ ffchars = NULL;
+ }
}
#endif
u_char *oob_buf, struct nand_oobinfo *oobsel, int cached)
{
int i, status;
- u_char ecc_code[32];
+ u_char ecc_code[NAND_MAX_OOBSIZE];
int eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
uint *oob_config = oobsel->eccpos;
int datidx = 0, eccidx = 0, eccsteps = this->eccsteps;
int read = 0, oob = 0, ecc_status = 0, ecc_failed = 0;
struct nand_chip *this = mtd->priv;
u_char *data_poi, *oob_data = oob_buf;
- u_char ecc_calc[32];
- u_char ecc_code[32];
+ u_char ecc_calc[NAND_MAX_OOBSIZE];
+ u_char ecc_code[NAND_MAX_OOBSIZE];
int eccmode, eccsteps;
unsigned *oob_config;
int datidx;
if (NAND_MUST_PAD(this)) {
/* Write out desired data */
this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock, page & this->pagemask);
+ if (!ffchars) {
+ if (!(ffchars = kmalloc (mtd->oobsize, GFP_KERNEL))) {
+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: "
+ "No memory for padding array, need %d bytes", mtd->oobsize);
+ ret = -ENOMEM;
+ goto out;
+ }
+ memset(ffchars, 0xff, mtd->oobsize);
+ }
/* prepad 0xff for partial programming */
this->write_buf(mtd, ffchars, column);
/* write data */
case 64:
this->autooob = &nand_oob_64;
break;
+ case 128:
+ this->autooob = &nand_oob_128;
+ break;
default:
printk (KERN_WARNING "No oob scheme defined for oobsize %d\n",
mtd->oobsize);
priv_nand->bbt = NULL;
}
+ if (erase_length < meminfo->erasesize) {
+ printf("Warning: Erase size 0x%08x smaller than one " \
+ "erase block 0x%08x\n",erase_length, meminfo->erasesize);
+ printf(" Erasing 0x%08x instead\n", meminfo->erasesize);
+ erase_length = meminfo->erasesize;
+ }
+
for (;
erase.addr < opts->offset + erase_length;
erase.addr += meminfo->erasesize) {
--- /dev/null
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB := $(obj)libspi_flash.a
+
+COBJS-$(CONFIG_SPI_FLASH) += spi_flash.o
+COBJS-$(CONFIG_SPI_FLASH_ATMEL) += atmel.o
+
+COBJS := $(COBJS-y)
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * Atmel SPI DataFlash support
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ */
+#define DEBUG
+#include <common.h>
+#include <malloc.h>
+#include <spi_flash.h>
+
+#include "spi_flash_internal.h"
+
+/* AT45-specific commands */
+#define CMD_AT45_READ_STATUS 0xd7
+#define CMD_AT45_ERASE_PAGE 0x81
+#define CMD_AT45_LOAD_PROG_BUF1 0x82
+#define CMD_AT45_LOAD_BUF1 0x84
+#define CMD_AT45_LOAD_PROG_BUF2 0x85
+#define CMD_AT45_LOAD_BUF2 0x87
+#define CMD_AT45_PROG_BUF1 0x88
+#define CMD_AT45_PROG_BUF2 0x89
+
+/* AT45 status register bits */
+#define AT45_STATUS_P2_PAGE_SIZE (1 << 0)
+#define AT45_STATUS_READY (1 << 7)
+
+/* DataFlash family IDs, as obtained from the second idcode byte */
+#define DF_FAMILY_AT26F 0
+#define DF_FAMILY_AT45 1
+#define DF_FAMILY_AT26DF 2 /* AT25DF and AT26DF */
+
+struct atmel_spi_flash_params {
+ u8 idcode1;
+ /* Log2 of page size in power-of-two mode */
+ u8 l2_page_size;
+ u8 pages_per_block;
+ u8 blocks_per_sector;
+ u8 nr_sectors;
+ const char *name;
+};
+
+struct atmel_spi_flash {
+ const struct atmel_spi_flash_params *params;
+ struct spi_flash flash;
+};
+
+static inline struct atmel_spi_flash *
+to_atmel_spi_flash(struct spi_flash *flash)
+{
+ return container_of(flash, struct atmel_spi_flash, flash);
+}
+
+static const struct atmel_spi_flash_params atmel_spi_flash_table[] = {
+ {
+ .idcode1 = 0x28,
+ .l2_page_size = 10,
+ .pages_per_block = 8,
+ .blocks_per_sector = 32,
+ .nr_sectors = 32,
+ .name = "AT45DB642D",
+ },
+};
+
+static int at45_wait_ready(struct spi_flash *flash, unsigned long timeout)
+{
+ struct spi_slave *spi = flash->spi;
+ unsigned long timebase;
+ int ret;
+ u8 cmd = CMD_AT45_READ_STATUS;
+ u8 status;
+
+ timebase = get_timer(0);
+
+ ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN);
+ if (ret)
+ return -1;
+
+ do {
+ ret = spi_xfer(spi, 8, NULL, &status, 0);
+ if (ret)
+ return -1;
+
+ if (status & AT45_STATUS_READY)
+ break;
+ } while (get_timer(timebase) < timeout);
+
+ /* Deactivate CS */
+ spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END);
+
+ if (status & AT45_STATUS_READY)
+ return 0;
+
+ /* Timed out */
+ return -1;
+}
+
+/*
+ * Assemble the address part of a command for AT45 devices in
+ * non-power-of-two page size mode.
+ */
+static void at45_build_address(struct atmel_spi_flash *asf, u8 *cmd, u32 offset)
+{
+ unsigned long page_addr;
+ unsigned long byte_addr;
+ unsigned long page_size;
+ unsigned int page_shift;
+
+ /*
+ * The "extra" space per page is the power-of-two page size
+ * divided by 32.
+ */
+ page_shift = asf->params->l2_page_size;
+ page_size = (1 << page_shift) + (1 << (page_shift - 5));
+ page_shift++;
+ page_addr = offset / page_size;
+ byte_addr = offset % page_size;
+
+ cmd[0] = page_addr >> (16 - page_shift);
+ cmd[1] = page_addr << (page_shift - 8) | (byte_addr >> 8);
+ cmd[2] = byte_addr;
+}
+
+static int dataflash_read_fast_p2(struct spi_flash *flash,
+ u32 offset, size_t len, void *buf)
+{
+ u8 cmd[5];
+
+ cmd[0] = CMD_READ_ARRAY_FAST;
+ cmd[1] = offset >> 16;
+ cmd[2] = offset >> 8;
+ cmd[3] = offset;
+ cmd[4] = 0x00;
+
+ return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len);
+}
+
+static int dataflash_read_fast_at45(struct spi_flash *flash,
+ u32 offset, size_t len, void *buf)
+{
+ struct atmel_spi_flash *asf = to_atmel_spi_flash(flash);
+ u8 cmd[5];
+
+ cmd[0] = CMD_READ_ARRAY_FAST;
+ at45_build_address(asf, cmd + 1, offset);
+ cmd[4] = 0x00;
+
+ return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len);
+}
+
+static int dataflash_write_at45(struct spi_flash *flash,
+ u32 offset, size_t len, const void *buf)
+{
+ struct atmel_spi_flash *asf = to_atmel_spi_flash(flash);
+ unsigned long page_addr;
+ unsigned long byte_addr;
+ unsigned long page_size;
+ unsigned int page_shift;
+ size_t chunk_len;
+ size_t actual;
+ int ret;
+ u8 cmd[4];
+
+ page_shift = asf->params->l2_page_size;
+ page_size = (1 << page_shift) + (1 << (page_shift - 5));
+ page_shift++;
+ page_addr = offset / page_size;
+ byte_addr = offset % page_size;
+
+ ret = spi_claim_bus(flash->spi);
+ if (ret) {
+ debug("SF: Unable to claim SPI bus\n");
+ return ret;
+ }
+
+ for (actual = 0; actual < len; actual += chunk_len) {
+ chunk_len = min(len - actual, page_size - byte_addr);
+
+ /* Use the same address bits for both commands */
+ cmd[0] = CMD_AT45_LOAD_BUF1;
+ cmd[1] = page_addr >> (16 - page_shift);
+ cmd[2] = page_addr << (page_shift - 8) | (byte_addr >> 8);
+ cmd[3] = byte_addr;
+
+ ret = spi_flash_cmd_write(flash->spi, cmd, 4,
+ buf + actual, chunk_len);
+ if (ret < 0) {
+ debug("SF: Loading AT45 buffer failed\n");
+ goto out;
+ }
+
+ cmd[0] = CMD_AT45_PROG_BUF1;
+ ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0);
+ if (ret < 0) {
+ debug("SF: AT45 page programming failed\n");
+ goto out;
+ }
+
+ ret = at45_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
+ if (ret < 0) {
+ debug("SF: AT45 page programming timed out\n");
+ goto out;
+ }
+
+ page_addr++;
+ byte_addr = 0;
+ }
+
+ debug("SF: AT45: Successfully programmed %u bytes @ 0x%x\n",
+ len, offset);
+ ret = 0;
+
+out:
+ spi_release_bus(flash->spi);
+ return ret;
+}
+
+int dataflash_erase_at45(struct spi_flash *flash, u32 offset, size_t len)
+{
+ struct atmel_spi_flash *asf = to_atmel_spi_flash(flash);
+ unsigned long page_addr;
+ unsigned long page_size;
+ unsigned int page_shift;
+ size_t actual;
+ int ret;
+ u8 cmd[4];
+
+ /*
+ * TODO: This function currently uses page erase only. We can
+ * probably speed things up by using block and/or sector erase
+ * when possible.
+ */
+
+ page_shift = asf->params->l2_page_size;
+ page_size = (1 << page_shift) + (1 << (page_shift - 5));
+ page_shift++;
+ page_addr = offset / page_size;
+
+ if (offset % page_size || len % page_size) {
+ debug("SF: Erase offset/length not multiple of page size\n");
+ return -1;
+ }
+
+ cmd[0] = CMD_AT45_ERASE_PAGE;
+ cmd[3] = 0x00;
+
+ ret = spi_claim_bus(flash->spi);
+ if (ret) {
+ debug("SF: Unable to claim SPI bus\n");
+ return ret;
+ }
+
+ for (actual = 0; actual < len; actual += page_size) {
+ cmd[1] = page_addr >> (16 - page_shift);
+ cmd[2] = page_addr << (page_shift - 8);
+
+ ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0);
+ if (ret < 0) {
+ debug("SF: AT45 page erase failed\n");
+ goto out;
+ }
+
+ ret = at45_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT);
+ if (ret < 0) {
+ debug("SF: AT45 page erase timed out\n");
+ goto out;
+ }
+
+ page_addr++;
+ }
+
+ debug("SF: AT45: Successfully erased %u bytes @ 0x%x\n",
+ len, offset);
+ ret = 0;
+
+out:
+ spi_release_bus(flash->spi);
+ return ret;
+}
+
+struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode)
+{
+ const struct atmel_spi_flash_params *params;
+ unsigned long page_size;
+ unsigned int family;
+ struct atmel_spi_flash *asf;
+ unsigned int i;
+ int ret;
+ u8 status;
+
+ for (i = 0; i < ARRAY_SIZE(atmel_spi_flash_table); i++) {
+ params = &atmel_spi_flash_table[i];
+ if (params->idcode1 == idcode[1])
+ break;
+ }
+
+ if (i == ARRAY_SIZE(atmel_spi_flash_table)) {
+ debug("SF: Unsupported DataFlash ID %02x\n",
+ idcode[1]);
+ return NULL;
+ }
+
+ asf = malloc(sizeof(struct atmel_spi_flash));
+ if (!asf) {
+ debug("SF: Failed to allocate memory\n");
+ return NULL;
+ }
+
+ asf->params = params;
+ asf->flash.spi = spi;
+ asf->flash.name = params->name;
+
+ /* Assuming power-of-two page size initially. */
+ page_size = 1 << params->l2_page_size;
+
+ family = idcode[1] >> 5;
+
+ switch (family) {
+ case DF_FAMILY_AT45:
+ /*
+ * AT45 chips have configurable page size. The status
+ * register indicates which configuration is active.
+ */
+ ret = spi_flash_cmd(spi, CMD_AT45_READ_STATUS, &status, 1);
+ if (ret)
+ goto err;
+
+ debug("SF: AT45 status register: %02x\n", status);
+
+ if (!(status & AT45_STATUS_P2_PAGE_SIZE)) {
+ asf->flash.read = dataflash_read_fast_at45;
+ asf->flash.write = dataflash_write_at45;
+ asf->flash.erase = dataflash_erase_at45;
+ page_size += 1 << (params->l2_page_size - 5);
+ } else {
+ asf->flash.read = dataflash_read_fast_p2;
+ }
+
+ break;
+
+ case DF_FAMILY_AT26F:
+ case DF_FAMILY_AT26DF:
+ asf->flash.read = dataflash_read_fast_p2;
+ break;
+
+ default:
+ debug("SF: Unsupported DataFlash family %u\n", family);
+ goto err;
+ }
+
+ asf->flash.size = page_size * params->pages_per_block
+ * params->blocks_per_sector
+ * params->nr_sectors;
+
+ debug("SF: Detected %s with page size %u, total %u bytes\n",
+ params->name, page_size, asf->flash.size);
+
+ return &asf->flash;
+
+err:
+ free(asf);
+ return NULL;
+}
--- /dev/null
+/*
+ * SPI flash interface
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ */
+#define DEBUG
+#include <common.h>
+#include <malloc.h>
+#include <spi.h>
+#include <spi_flash.h>
+
+#include "spi_flash_internal.h"
+
+int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len)
+{
+ unsigned long flags = SPI_XFER_BEGIN;
+ int ret;
+
+ if (len == 0)
+ flags |= SPI_XFER_END;
+
+ ret = spi_xfer(spi, 8, &cmd, NULL, flags);
+ if (ret) {
+ debug("SF: Failed to send command %02x: %d\n", cmd, ret);
+ return ret;
+ }
+
+ if (len) {
+ ret = spi_xfer(spi, len * 8, NULL, response, SPI_XFER_END);
+ if (ret)
+ debug("SF: Failed to read response (%zu bytes): %d\n",
+ len, ret);
+ }
+
+ return ret;
+}
+
+int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd,
+ size_t cmd_len, void *data, size_t data_len)
+{
+ unsigned long flags = SPI_XFER_BEGIN;
+ int ret;
+
+ if (data_len == 0)
+ flags |= SPI_XFER_END;
+
+ ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags);
+ if (ret) {
+ debug("SF: Failed to send read command (%zu bytes): %d\n",
+ cmd_len, ret);
+ } else if (data_len != 0) {
+ ret = spi_xfer(spi, data_len * 8, NULL, data, SPI_XFER_END);
+ if (ret)
+ debug("SF: Failed to read %zu bytes of data: %d\n",
+ data_len, ret);
+ }
+
+ return ret;
+}
+
+int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
+ const void *data, size_t data_len)
+{
+ unsigned long flags = SPI_XFER_BEGIN;
+ int ret;
+
+ if (data_len == 0)
+ flags |= SPI_XFER_END;
+
+ ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags);
+ if (ret) {
+ debug("SF: Failed to send read command (%zu bytes): %d\n",
+ cmd_len, ret);
+ } else if (data_len != 0) {
+ ret = spi_xfer(spi, data_len * 8, data, NULL, SPI_XFER_END);
+ if (ret)
+ debug("SF: Failed to read %zu bytes of data: %d\n",
+ data_len, ret);
+ }
+
+ return ret;
+}
+
+
+int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
+ size_t cmd_len, void *data, size_t data_len)
+{
+ struct spi_slave *spi = flash->spi;
+ int ret;
+
+ spi_claim_bus(spi);
+ ret = spi_flash_cmd_read(spi, cmd, cmd_len, data, data_len);
+ spi_release_bus(spi);
+
+ return ret;
+}
+
+struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int spi_mode)
+{
+ struct spi_slave *spi;
+ struct spi_flash *flash;
+ int ret;
+ u8 idcode[3];
+
+ spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
+ if (!spi) {
+ debug("SF: Failed to set up slave\n");
+ return NULL;
+ }
+
+ ret = spi_claim_bus(spi);
+ if (ret) {
+ debug("SF: Failed to claim SPI bus: %d\n", ret);
+ goto err_claim_bus;
+ }
+
+ /* Read the ID codes */
+ ret = spi_flash_cmd(spi, CMD_READ_ID, &idcode, sizeof(idcode));
+ if (ret)
+ goto err_read_id;
+
+ debug("SF: Got idcode %02x %02x %02x\n", idcode[0],
+ idcode[1], idcode[2]);
+
+ switch (idcode[0]) {
+#ifdef CONFIG_SPI_FLASH_SPANSION
+ case 0x01:
+ flash = spi_flash_probe_spansion(spi, idcode);
+ break;
+#endif
+#ifdef CONFIG_SPI_FLASH_ATMEL
+ case 0x1F:
+ flash = spi_flash_probe_atmel(spi, idcode);
+ break;
+#endif
+ default:
+ debug("SF: Unsupported manufacturer %02X\n", idcode[0]);
+ flash = NULL;
+ break;
+ }
+
+ if (!flash)
+ goto err_manufacturer_probe;
+
+ spi_release_bus(spi);
+
+ return flash;
+
+err_manufacturer_probe:
+err_read_id:
+ spi_release_bus(spi);
+err_claim_bus:
+ spi_free_slave(spi);
+ return NULL;
+}
+
+void spi_flash_free(struct spi_flash *flash)
+{
+ spi_free_slave(flash->spi);
+ free(flash);
+}
--- /dev/null
+/*
+ * SPI flash internal definitions
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ */
+
+/* Common parameters */
+#define SPI_FLASH_PROG_TIMEOUT ((10 * CFG_HZ) / 1000)
+#define SPI_FLASH_PAGE_ERASE_TIMEOUT ((50 * CFG_HZ) / 1000)
+#define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CFG_HZ)
+
+/* Common commands */
+#define CMD_READ_ID 0x9f
+
+#define CMD_READ_ARRAY_SLOW 0x03
+#define CMD_READ_ARRAY_FAST 0x0b
+#define CMD_READ_ARRAY_LEGACY 0xe8
+
+/* Send a single-byte command to the device and read the response */
+int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len);
+
+/*
+ * Send a multi-byte command to the device and read the response. Used
+ * for flash array reads, etc.
+ */
+int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd,
+ size_t cmd_len, void *data, size_t data_len);
+
+/*
+ * Send a multi-byte command to the device followed by (optional)
+ * data. Used for programming the flash array, etc.
+ */
+int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
+ const void *data, size_t data_len);
+
+/*
+ * Same as spi_flash_cmd_read() except it also claims/releases the SPI
+ * bus. Used as common part of the ->read() operation.
+ */
+int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
+ size_t cmd_len, void *data, size_t data_len);
+
+/* Manufacturer-specific probe functions */
+struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode);
+struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode);
DM9000_iow(DM9000_ISR, 0x0f); /* Clear interrupt status */
/* Set Node address */
+#ifndef CONFIG_AT91SAM9261EK
for (i = 0; i < 6; i++)
((u16 *) bd->bi_enetaddr)[i] = read_srom_word(i);
+#endif
if (is_zero_ether_addr(bd->bi_enetaddr) ||
is_multicast_ether_addr(bd->bi_enetaddr)) {
/* choose RMII or MII mode. This depends on the board */
#ifdef CONFIG_RMII
-#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260)
+#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
+ defined(CONFIG_AT91SAM9263)
macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN));
#else
macb_writel(macb, USRIO, 0);
#endif
#else
-#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260)
+#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
+ defined(CONFIG_AT91SAM9263)
macb_writel(macb, USRIO, MACB_BIT(CLKEN));
#else
macb_writel(macb, USRIO, MACB_BIT(MII));
#define RTC_USER_RAM_BASE 0x20
-/*
- * External table of chip select functions (see the appropriate board
- * support for the actual definition of the table).
- */
-extern spi_chipsel_type spi_chipsel[];
-extern int spi_chipsel_cnt;
-
static unsigned int bin2bcd (unsigned int n);
static unsigned char bcd2bin (unsigned char c);
static unsigned char rtc_read (unsigned char reg);
static void rtc_write (unsigned char reg, unsigned char val);
+static struct spi_slave *slave;
+
/* read clock time from DS1306 and return it in *tmp */
int rtc_get (struct rtc_time *tmp)
{
unsigned char sec, min, hour, mday, wday, mon, year;
+ /*
+ * Assuming Vcc = 2.0V (lowest speed)
+ *
+ * REVISIT: If we add an rtc_init() function we can do this
+ * step just once.
+ */
+ if (!slave) {
+ slave = spi_setup_slave(0, CFG_SPI_RTC_DEVID, 600000,
+ SPI_MODE_3 | SPI_CS_HIGH);
+ if (!slave)
+ return;
+ }
+
+ if (spi_claim_bus(slave))
+ return;
+
sec = rtc_read (RTC_SECONDS);
min = rtc_read (RTC_MINUTES);
hour = rtc_read (RTC_HOURS);
mon = rtc_read (RTC_MONTH);
year = rtc_read (RTC_YEAR);
+ spi_release_bus(slave);
+
debug ("Get RTC year: %02x mon: %02x mday: %02x wday: %02x "
"hr: %02x min: %02x sec: %02x\n",
year, mon, mday, wday, hour, min, sec);
/* set clock time from *tmp in DS1306 RTC */
void rtc_set (struct rtc_time *tmp)
{
+ /* Assuming Vcc = 2.0V (lowest speed) */
+ if (!slave) {
+ slave = spi_setup_slave(0, CFG_SPI_RTC_DEVID, 600000,
+ SPI_MODE_3 | SPI_CS_HIGH);
+ if (!slave)
+ return;
+ }
+
+ if (spi_claim_bus(slave))
+ return;
+
debug ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
rtc_write (RTC_DATE_OF_MONTH, bin2bcd (tmp->tm_mday));
rtc_write (RTC_MONTH, bin2bcd (tmp->tm_mon));
rtc_write (RTC_YEAR, bin2bcd (tmp->tm_year - 2000));
+
+ spi_release_bus(slave);
}
/* ------------------------------------------------------------------------- */
/* reset the DS1306 */
void rtc_reset (void)
{
+ /* Assuming Vcc = 2.0V (lowest speed) */
+ if (!slave) {
+ slave = spi_setup_slave(0, CFG_SPI_RTC_DEVID, 600000,
+ SPI_MODE_3 | SPI_CS_HIGH);
+ if (!slave)
+ return;
+ }
+
+ if (spi_claim_bus(slave))
+ return;
+
/* clear the control register */
rtc_write (RTC_CONTROL, 0x00); /* 1st step: reset WP */
rtc_write (RTC_CONTROL, 0x00); /* 2nd step: reset 1Hz, AIE1, AIE0 */
rtc_write (RTC_HOURS_ALARM1, 0x00);
rtc_write (RTC_DAY_OF_WEEK_ALARM0, 0x00);
rtc_write (RTC_DAY_OF_WEEK_ALARM1, 0x00);
+
+ spi_release_bus(slave);
}
/* ------------------------------------------------------------------------- */
static unsigned char rtc_read (unsigned char reg)
{
- unsigned char dout[2]; /* SPI Output Data Bytes */
- unsigned char din[2]; /* SPI Input Data Bytes */
-
- dout[0] = reg;
+ int ret;
- if (spi_xfer (spi_chipsel[CFG_SPI_RTC_DEVID], 16, dout, din) != 0) {
- return 0;
- } else {
- return din[1];
- }
+ ret = spi_w8r8(slave, reg);
+ return ret < 0 ? 0 : ret;
}
/* ------------------------------------------------------------------------- */
dout[0] = 0x80 | reg;
dout[1] = val;
- spi_xfer (spi_chipsel[CFG_SPI_RTC_DEVID], 16, dout, din);
+ spi_xfer (slave, 16, dout, din, SPI_XFER_BEGIN | SPI_XFER_END);
}
#endif /* end of code exclusion (see #ifdef CONFIG_SXNI855T above) */
#include <rtc.h>
#include <spi.h>
+static struct spi_slave *slave;
+
int rtc_get(struct rtc_time *rtc)
{
u32 day1, day2, time;
u32 reg;
int err, tim, i = 0;
- spi_select(1, 0, SPI_MODE_2 | SPI_CS_HIGH);
+ if (!slave) {
+ /* FIXME: Verify the max SCK rate */
+ slave = spi_setup_slave(1, 0, 1000000,
+ SPI_MODE_2 | SPI_CS_HIGH);
+ if (!slave)
+ return -1;
+ }
+
+ if (spi_claim_bus(slave))
+ return -1;
do {
reg = 0x2c000000;
- err = spi_xfer(0, 32, (uchar *)®, (uchar *)&day1);
+ err = spi_xfer(slave, 32, (uchar *)®, (uchar *)&day1,
+ SPI_XFER_BEGIN | SPI_XFER_END);
if (err)
return err;
reg = 0x28000000;
- err = spi_xfer(0, 32, (uchar *)®, (uchar *)&time);
+ err = spi_xfer(slave, 32, (uchar *)®, (uchar *)&time,
+ SPI_XFER_BEGIN | SPI_XFER_END);
if (err)
return err;
reg = 0x2c000000;
- err = spi_xfer(0, 32, (uchar *)®, (uchar *)&day2);
+ err = spi_xfer(slave, 32, (uchar *)®, (uchar *)&day2,
+ SPI_XFER_BEGIN | SPI_XFER_END);
if (err)
return err;
} while (day1 != day2 && i++ < 3);
+ spi_release_bus(slave);
+
tim = day1 * 86400 + time;
to_tm(tim, rtc);
{
u32 time, day, reg;
+ if (!slave) {
+ /* FIXME: Verify the max SCK rate */
+ slave = spi_setup_slave(1, 0, 1000000,
+ SPI_MODE_2 | SPI_CS_HIGH);
+ if (!slave)
+ return;
+ }
+
time = mktime(rtc->tm_year, rtc->tm_mon, rtc->tm_mday,
rtc->tm_hour, rtc->tm_min, rtc->tm_sec);
day = time / 86400;
time %= 86400;
+ if (spi_claim_bus(slave))
+ return;
+
reg = 0x2c000000 | day | 0x80000000;
- spi_xfer(0, 32, (uchar *)®, (uchar *)&day);
+ spi_xfer(slave, 32, (uchar *)®, (uchar *)&day,
+ SPI_XFER_BEGIN | SPI_XFER_END);
reg = 0x28000000 | time | 0x80000000;
- spi_xfer(0, 32, (uchar *)®, (uchar *)&time);
+ spi_xfer(slave, 32, (uchar *)®, (uchar *)&time,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+
+ spi_release_bus(slave);
}
void rtc_reset(void)
LIB := $(obj)libspi.a
COBJS-y += mpc8xxx_spi.o
+COBJS-$(CONFIG_ATMEL_SPI) += atmel_spi.o
COBJS-$(CONFIG_MXC_SPI) += mxc_spi.o
COBJS := $(COBJS-y)
--- /dev/null
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <spi.h>
+#include <malloc.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/clk.h>
+#include <asm/arch/memory-map.h>
+
+#include "atmel_spi.h"
+
+void spi_init()
+{
+
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct atmel_spi_slave *as;
+ unsigned int scbr;
+ u32 csrx;
+ void *regs;
+
+ if (cs > 3 || !spi_cs_is_valid(bus, cs))
+ return NULL;
+
+ switch (bus) {
+ case 0:
+ regs = (void *)SPI0_BASE;
+ break;
+#ifdef SPI1_BASE
+ case 1:
+ regs = (void *)SPI1_BASE;
+ break;
+#endif
+#ifdef SPI2_BASE
+ case 2:
+ regs = (void *)SPI2_BASE;
+ break;
+#endif
+#ifdef SPI3_BASE
+ case 3:
+ regs = (void *)SPI3_BASE;
+ break;
+#endif
+ default:
+ return NULL;
+ }
+
+
+ scbr = (get_spi_clk_rate(bus) + max_hz - 1) / max_hz;
+ if (scbr > ATMEL_SPI_CSRx_SCBR_MAX)
+ /* Too low max SCK rate */
+ return NULL;
+ if (scbr < 1)
+ scbr = 1;
+
+ csrx = ATMEL_SPI_CSRx_SCBR(scbr);
+ csrx |= ATMEL_SPI_CSRx_BITS(ATMEL_SPI_BITS_8);
+ if (!(mode & SPI_CPHA))
+ csrx |= ATMEL_SPI_CSRx_NCPHA;
+ if (mode & SPI_CPOL)
+ csrx |= ATMEL_SPI_CSRx_CPOL;
+
+ as = malloc(sizeof(struct atmel_spi_slave));
+ if (!as)
+ return NULL;
+
+ as->slave.bus = bus;
+ as->slave.cs = cs;
+ as->regs = regs;
+ as->mr = ATMEL_SPI_MR_MSTR | ATMEL_SPI_MR_MODFDIS
+ | ATMEL_SPI_MR_PCS(~(1 << cs) & 0xf);
+ spi_writel(as, CSR(cs), csrx);
+
+ return &as->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ struct atmel_spi_slave *as = to_atmel_spi(slave);
+
+ free(as);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ struct atmel_spi_slave *as = to_atmel_spi(slave);
+
+ /* Enable the SPI hardware */
+ spi_writel(as, CR, ATMEL_SPI_CR_SPIEN);
+
+ /*
+ * Select the slave. This should set SCK to the correct
+ * initial state, etc.
+ */
+ spi_writel(as, MR, as->mr);
+
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+ struct atmel_spi_slave *as = to_atmel_spi(slave);
+
+ /* Disable the SPI hardware */
+ spi_writel(as, CR, ATMEL_SPI_CR_SPIDIS);
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
+{
+ struct atmel_spi_slave *as = to_atmel_spi(slave);
+ unsigned int len_tx;
+ unsigned int len_rx;
+ unsigned int len;
+ int ret;
+ u32 status;
+ const u8 *txp = dout;
+ u8 *rxp = din;
+ u8 value;
+
+ ret = 0;
+ if (bitlen == 0)
+ /* Finish any previously submitted transfers */
+ goto out;
+
+ /*
+ * TODO: The controller can do non-multiple-of-8 bit
+ * transfers, but this driver currently doesn't support it.
+ *
+ * It's also not clear how such transfers are supposed to be
+ * represented as a stream of bytes...this is a limitation of
+ * the current SPI interface.
+ */
+ if (bitlen % 8) {
+ /* Errors always terminate an ongoing transfer */
+ flags |= SPI_XFER_END;
+ goto out;
+ }
+
+ len = bitlen / 8;
+
+ /*
+ * The controller can do automatic CS control, but it is
+ * somewhat quirky, and it doesn't really buy us much anyway
+ * in the context of U-Boot.
+ */
+ if (flags & SPI_XFER_BEGIN)
+ spi_cs_activate(slave);
+
+ for (len_tx = 0, len_rx = 0; len_rx < len; ) {
+ status = spi_readl(as, SR);
+
+ if (status & ATMEL_SPI_SR_OVRES)
+ return -1;
+
+ if (len_tx < len && (status & ATMEL_SPI_SR_TDRE)) {
+ if (txp)
+ value = *txp++;
+ else
+ value = 0;
+ spi_writel(as, TDR, value);
+ len_tx++;
+ }
+ if (status & ATMEL_SPI_SR_RDRF) {
+ value = spi_readl(as, RDR);
+ if (rxp)
+ *rxp++ = value;
+ len_rx++;
+ }
+ }
+
+out:
+ if (flags & SPI_XFER_END) {
+ /*
+ * Wait until the transfer is completely done before
+ * we deactivate CS.
+ */
+ do {
+ status = spi_readl(as, SR);
+ } while (!(status & ATMEL_SPI_SR_TXEMPTY));
+
+ spi_cs_deactivate(slave);
+ }
+
+ return 0;
+}
--- /dev/null
+/*
+ * Register definitions for the Atmel AT32/AT91 SPI Controller
+ */
+
+/* Register offsets */
+#define ATMEL_SPI_CR 0x0000
+#define ATMEL_SPI_MR 0x0004
+#define ATMEL_SPI_RDR 0x0008
+#define ATMEL_SPI_TDR 0x000c
+#define ATMEL_SPI_SR 0x0010
+#define ATMEL_SPI_IER 0x0014
+#define ATMEL_SPI_IDR 0x0018
+#define ATMEL_SPI_IMR 0x001c
+#define ATMEL_SPI_CSR(x) (0x0030 + 4 * (x))
+#define ATMEL_SPI_VERSION 0x00fc
+
+/* Bits in CR */
+#define ATMEL_SPI_CR_SPIEN (1 << 0)
+#define ATMEL_SPI_CR_SPIDIS (1 << 1)
+#define ATMEL_SPI_CR_SWRST (1 << 7)
+#define ATMEL_SPI_CR_LASTXFER (1 << 24)
+
+/* Bits in MR */
+#define ATMEL_SPI_MR_MSTR (1 << 0)
+#define ATMEL_SPI_MR_PS (1 << 1)
+#define ATMEL_SPI_MR_PCSDEC (1 << 2)
+#define ATMEL_SPI_MR_FDIV (1 << 3)
+#define ATMEL_SPI_MR_MODFDIS (1 << 4)
+#define ATMEL_SPI_MR_LLB (1 << 7)
+#define ATMEL_SPI_MR_PCS(x) (((x) & 15) << 16)
+#define ATMEL_SPI_MR_DLYBCS(x) ((x) << 24)
+
+/* Bits in RDR */
+#define ATMEL_SPI_RDR_RD(x) (x)
+#define ATMEL_SPI_RDR_PCS(x) ((x) << 16)
+
+/* Bits in TDR */
+#define ATMEL_SPI_TDR_TD(x) (x)
+#define ATMEL_SPI_TDR_PCS(x) ((x) << 16)
+#define ATMEL_SPI_TDR_LASTXFER (1 << 24)
+
+/* Bits in SR/IER/IDR/IMR */
+#define ATMEL_SPI_SR_RDRF (1 << 0)
+#define ATMEL_SPI_SR_TDRE (1 << 1)
+#define ATMEL_SPI_SR_MODF (1 << 2)
+#define ATMEL_SPI_SR_OVRES (1 << 3)
+#define ATMEL_SPI_SR_ENDRX (1 << 4)
+#define ATMEL_SPI_SR_ENDTX (1 << 5)
+#define ATMEL_SPI_SR_RXBUFF (1 << 6)
+#define ATMEL_SPI_SR_TXBUFE (1 << 7)
+#define ATMEL_SPI_SR_NSSR (1 << 8)
+#define ATMEL_SPI_SR_TXEMPTY (1 << 9)
+#define ATMEL_SPI_SR_SPIENS (1 << 16)
+
+/* Bits in CSRx */
+#define ATMEL_SPI_CSRx_CPOL (1 << 0)
+#define ATMEL_SPI_CSRx_NCPHA (1 << 1)
+#define ATMEL_SPI_CSRx_CSAAT (1 << 3)
+#define ATMEL_SPI_CSRx_BITS(x) ((x) << 4)
+#define ATMEL_SPI_CSRx_SCBR(x) ((x) << 8)
+#define ATMEL_SPI_CSRx_SCBR_MAX 0xff
+#define ATMEL_SPI_CSRx_DLYBS(x) ((x) << 16)
+#define ATMEL_SPI_CSRx_DLYBCT(x) ((x) << 24)
+
+/* Bits in VERSION */
+#define ATMEL_SPI_VERSION_REV(x) ((x) << 0)
+#define ATMEL_SPI_VERSION_MFN(x) ((x) << 16)
+
+/* Constants for CSRx:BITS */
+#define ATMEL_SPI_BITS_8 0
+#define ATMEL_SPI_BITS_9 1
+#define ATMEL_SPI_BITS_10 2
+#define ATMEL_SPI_BITS_11 3
+#define ATMEL_SPI_BITS_12 4
+#define ATMEL_SPI_BITS_13 5
+#define ATMEL_SPI_BITS_14 6
+#define ATMEL_SPI_BITS_15 7
+#define ATMEL_SPI_BITS_16 8
+
+struct atmel_spi_slave {
+ struct spi_slave slave;
+ void *regs;
+ u32 mr;
+};
+
+static inline struct atmel_spi_slave *to_atmel_spi(struct spi_slave *slave)
+{
+ return container_of(slave, struct atmel_spi_slave, slave);
+}
+
+/* Register access macros */
+#define spi_readl(as, reg) \
+ readl(as->regs + ATMEL_SPI_##reg)
+#define spi_writel(as, reg, value) \
+ writel(value, as->regs + ATMEL_SPI_##reg)
#include <common.h>
#if defined(CONFIG_MPC8XXX_SPI) && defined(CONFIG_HARD_SPI)
+#include <malloc.h>
#include <spi.h>
#include <asm/mpc8xxx_spi.h>
#define SPI_TIMEOUT 1000
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct spi_slave *slave;
+
+ if (!spi_cs_is_valid(bus, cs))
+ return NULL;
+
+ slave = malloc(sizeof(struct spi_slave));
+ if (!slave)
+ return NULL;
+
+ slave->bus = bus;
+ slave->cs = cs;
+
+ /*
+ * TODO: Some of the code in spi_init() should probably move
+ * here, or into spi_claim_bus() below.
+ */
+
+ return slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ free(slave);
+}
+
void spi_init(void)
{
volatile spi8xxx_t *spi = &((immap_t *) (CFG_IMMR))->spi;
spi->com = 0; /* LST bit doesn't do anything, so disregard */
}
-int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
+int spi_claim_bus(struct spi_slave *slave)
+{
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
+ void *din, unsigned long flags)
{
volatile spi8xxx_t *spi = &((immap_t *) (CFG_IMMR))->spi;
unsigned int tmpdout, tmpdin, event;
int tm, isRead = 0;
unsigned char charSize = 32;
- debug("spi_xfer: chipsel %08X dout %08X din %08X bitlen %d\n",
- (int)chipsel, *(uint *) dout, *(uint *) din, bitlen);
+ debug("spi_xfer: slave %u:%u dout %08X din %08X bitlen %u\n",
+ slave->bus, slave->cs, *(uint *) dout, *(uint *) din, bitlen);
- if (chipsel != NULL)
- (*chipsel) (1); /* select the target chip */
+ if (flags & SPI_XFER_BEGIN)
+ spi_cs_activate(slave);
spi->event = 0xffffffff; /* Clear all SPI events */
debug("*** spi_xfer: transfer ended. Value=%08x\n", tmpdin);
}
- if (chipsel != NULL)
- (*chipsel) (0); /* deselect the target chip */
+ if (flags & SPI_XFER_END)
+ spi_cs_deactivate(slave);
return 0;
}
*/
#include <common.h>
+#include <malloc.h>
#include <spi.h>
#include <asm/io.h>
0x53f84000,
};
-static unsigned long spi_base;
-
#endif
-spi_chipsel_type spi_chipsel[] = {
- (spi_chipsel_type)0,
- (spi_chipsel_type)1,
- (spi_chipsel_type)2,
- (spi_chipsel_type)3,
+struct mxc_spi_slave {
+ struct spi_slave slave;
+ unsigned long base;
+ u32 ctrl_reg;
};
-int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
+
+static inline struct mxc_spi_slave *to_mxc_spi_slave(struct spi_slave *slave)
+{
+ return container_of(slave, struct mxc_spi_slave, slave);
+}
static inline u32 reg_read(unsigned long addr)
{
*(volatile unsigned long*)addr = val;
}
-static u32 spi_xchg_single(u32 data, int bitlen)
+static u32 spi_xchg_single(struct spi_slave *slave, u32 data, int bitlen)
{
-
- unsigned int cfg_reg = reg_read(spi_base + MXC_CSPICTRL);
+ struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
+ unsigned int cfg_reg = reg_read(mxcs->base + MXC_CSPICTRL);
if (MXC_CSPICTRL_BITCOUNT(bitlen - 1) != (cfg_reg & MXC_CSPICTRL_BITCOUNT(31))) {
cfg_reg = (cfg_reg & ~MXC_CSPICTRL_BITCOUNT(31)) |
MXC_CSPICTRL_BITCOUNT(bitlen - 1);
- reg_write(spi_base + MXC_CSPICTRL, cfg_reg);
+ reg_write(mxcs->base + MXC_CSPICTRL, cfg_reg);
}
- reg_write(spi_base + MXC_CSPITXDATA, data);
+ reg_write(mxcs->base + MXC_CSPITXDATA, data);
cfg_reg |= MXC_CSPICTRL_XCH;
- reg_write(spi_base + MXC_CSPICTRL, cfg_reg);
+ reg_write(mxcs->base + MXC_CSPICTRL, cfg_reg);
- while (reg_read(spi_base + MXC_CSPICTRL) & MXC_CSPICTRL_XCH)
+ while (reg_read(mxcs->base + MXC_CSPICTRL) & MXC_CSPICTRL_XCH)
;
- return reg_read(spi_base + MXC_CSPIRXDATA);
+ return reg_read(mxcs->base + MXC_CSPIRXDATA);
}
-int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
+ void *din, unsigned long flags)
{
int n_blks = (bitlen + 31) / 32;
u32 *out_l, *in_l;
return 1;
}
- if (!spi_base)
- spi_select(CONFIG_MXC_SPI_IFACE, (int)chipsel, SPI_MODE_2 | SPI_CS_HIGH);
-
for (i = 0, in_l = (u32 *)din, out_l = (u32 *)dout;
i < n_blks;
i++, in_l++, out_l++, bitlen -= 32)
- *in_l = spi_xchg_single(*out_l, bitlen);
+ *in_l = spi_xchg_single(slave, *out_l, bitlen);
return 0;
}
{
}
-int spi_select(unsigned int bus, unsigned int dev, unsigned long mode)
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
{
unsigned int ctrl_reg;
+ struct mxc_spi_slave *mxcs;
if (bus >= sizeof(spi_bases) / sizeof(spi_bases[0]) ||
- dev > 3)
- return 1;
-
- spi_base = spi_bases[bus];
+ cs > 3)
+ return NULL;
- ctrl_reg = MXC_CSPICTRL_CHIPSELECT(dev) |
+ ctrl_reg = MXC_CSPICTRL_CHIPSELECT(cs) |
MXC_CSPICTRL_BITCOUNT(31) |
MXC_CSPICTRL_DATARATE(7) | /* FIXME: calculate data rate */
MXC_CSPICTRL_EN |
if (mode & SPI_CS_HIGH)
ctrl_reg |= MXC_CSPICTRL_SSPOL;
- reg_write(spi_base + MXC_CSPIRESET, 1);
+ mxcs = malloc(sizeof(struct mxc_spi_slave));
+ if (!mxcs)
+ return NULL;
+
+ mxcs->slave.bus = bus;
+ mxcs->slave.cs = cs;
+ mxcs->base = spi_bases[bus];
+ mxcs->ctrl_reg = ctrl_reg;
+
+ return &mxcs->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ free(slave);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
+
+ reg_write(mxcs->base + MXC_CSPIRESET, 1);
udelay(1);
- reg_write(spi_base + MXC_CSPICTRL, ctrl_reg);
- reg_write(spi_base + MXC_CSPIPERIOD,
+ reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg);
+ reg_write(mxcs->base + MXC_CSPIPERIOD,
MXC_CSPIPERIOD_32KHZ);
- reg_write(spi_base + MXC_CSPIINT, 0);
+ reg_write(mxcs->base + MXC_CSPIINT, 0);
return 0;
}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+ /* TODO: Shut the controller down */
+}
LIB := $(obj)libvideo.a
COBJS-y += ati_radeon_fb.o
+COBJS-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o
COBJS-y += cfb_console.o
COBJS-y += ct69000.o
COBJS-y += mb862xx.o
--- /dev/null
+/*
+ * Driver for AT91/AT32 LCD Controller
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/clk.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
+
+int lcd_line_length;
+int lcd_color_fg;
+int lcd_color_bg;
+
+void *lcd_base; /* Start of framebuffer memory */
+void *lcd_console_address; /* Start of console buffer */
+
+short console_col;
+short console_row;
+
+/* configurable parameters */
+#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
+#define ATMEL_LCDC_DMA_BURST_LEN 8
+
+#if defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91CAP9)
+#define ATMEL_LCDC_FIFO_SIZE 2048
+#else
+#define ATMEL_LCDC_FIFO_SIZE 512
+#endif
+
+#define lcdc_readl(mmio, reg) __raw_readl((mmio)+(reg))
+#define lcdc_writel(mmio, reg, val) __raw_writel((val), (mmio)+(reg))
+
+void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
+{
+#if defined(CONFIG_ATMEL_LCD_BGR555)
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_LUT(regno),
+ (red >> 3) | ((green & 0xf8) << 2) | ((blue & 0xf8) << 7));
+#else
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_LUT(regno),
+ (blue >> 3) | ((green & 0xfc) << 3) | ((red & 0xf8) << 8));
+#endif
+}
+
+void lcd_ctrl_init(void *lcdbase)
+{
+ unsigned long value;
+
+ /* Turn off the LCD controller and the DMA controller */
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON,
+ 1 << ATMEL_LCDC_GUARDT_OFFSET);
+
+ /* Wait for the LCDC core to become idle */
+ while (lcdc_readl(panel_info.mmio, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
+ udelay(10);
+
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, 0);
+
+ /* Reset LCDC DMA */
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMARST);
+
+ /* ...set frame size and burst length = 8 words (?) */
+ value = (panel_info.vl_col * panel_info.vl_row *
+ NBITS(panel_info.vl_bpix)) / 32;
+ value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMAFRMCFG, value);
+
+ /* Set pixel clock */
+ value = get_lcdc_clk_rate(0) / panel_info.vl_clk;
+ if (get_lcdc_clk_rate(0) % panel_info.vl_clk)
+ value++;
+ value = (value / 2) - 1;
+
+ if (!value) {
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
+ } else
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON1,
+ value << ATMEL_LCDC_CLKVAL_OFFSET);
+
+ /* Initialize control register 2 */
+ value = ATMEL_LCDC_MEMOR_LITTLE | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE;
+ if (panel_info.vl_tft)
+ value |= ATMEL_LCDC_DISTYPE_TFT;
+
+ if (!(panel_info.vl_sync & ATMEL_LCDC_INVLINE_INVERTED))
+ value |= ATMEL_LCDC_INVLINE_INVERTED;
+ if (!(panel_info.vl_sync & ATMEL_LCDC_INVFRAME_INVERTED))
+ value |= ATMEL_LCDC_INVFRAME_INVERTED;
+ value |= (panel_info.vl_bpix << 5);
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON2, value);
+
+ /* Vertical timing */
+ value = (panel_info.vl_vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
+ value |= panel_info.vl_upper_margin << ATMEL_LCDC_VBP_OFFSET;
+ value |= panel_info.vl_lower_margin;
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_TIM1, value);
+
+ /* Horizontal timing */
+ value = (panel_info.vl_right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
+ value |= (panel_info.vl_hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
+ value |= (panel_info.vl_left_margin - 1);
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_TIM2, value);
+
+ /* Display size */
+ value = (panel_info.vl_col - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
+ value |= panel_info.vl_row - 1;
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDFRMCFG, value);
+
+ /* FIFO Threshold: Use formula from data sheet */
+ value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_FIFO, value);
+
+ /* Toggle LCD_MODE every frame */
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_MVAL, 0);
+
+ /* Disable all interrupts */
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_IDR, ~0UL);
+
+ /* Set contrast */
+ value = ATMEL_LCDC_PS_DIV8 |
+ ATMEL_LCDC_POL_POSITIVE |
+ ATMEL_LCDC_ENA_PWMENABLE;
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_CONTRAST_CTR, value);
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
+
+ /* Set framebuffer DMA base address and pixel offset */
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMABADDR1, (u_long)lcdbase);
+
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMAEN);
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON,
+ (1 << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
+}
+
+ulong calc_fbsize(void)
+{
+ return ((panel_info.vl_col * panel_info.vl_row *
+ NBITS(panel_info.vl_bpix)) / 8) + PAGE_SIZE;
+}
/* this one defined in nand_legacy.c */
int read_jffs2_nand(size_t start, size_t len,
size_t * retlen, u_char * buf, int nanddev);
-#else
-/* info for NAND chips, defined in drivers/mtd/nand/nand.c */
-extern nand_info_t nand_info[];
#endif
#define NAND_PAGE_SIZE 512
#endif
#define Altera_EP1K100_SIZE (166965*8)
+#define Altera_EP2C8_SIZE 247942
+#define Altera_EP2C20_SIZE 586562
#define Altera_EP2C35_SIZE 883905
/* Descriptor Macros
#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */
#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */
+#define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Protect Register [AT91CAP9 revC only] */
+#define AT91_PMC_PROTKEY 0x504d4301 /* Activation Code */
+
+#define AT91_PMC_VER (AT91_PMC + 0xfc) /* PMC Module Version [AT91CAP9 only] */
+
#endif
#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
-#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
+#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR_REVB (0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR_REVC (0xfffffd60 - AT91_BASE_SYS)
#define AT91_USART0 AT91CAP9_BASE_US0
#define AT91_USART1 AT91CAP9_BASE_US1
#define AT91_USART2 AT91CAP9_BASE_US2
+/*
+ * SCKCR flags
+ */
+#define AT91CAP9_SCKCR_RCEN (1 << 0) /* RC Oscillator Enable */
+#define AT91CAP9_SCKCR_OSC32EN (1 << 1) /* 32kHz Oscillator Enable */
+#define AT91CAP9_SCKCR_OSC32BYP (1 << 2) /* 32kHz Oscillator Bypass */
+#define AT91CAP9_SCKCR_OSCSEL (1 << 3) /* Slow Clock Selector */
+#define AT91CAP9_SCKCR_OSCSEL_RC (0 << 3)
+#define AT91CAP9_SCKCR_OSCSEL_32 (1 << 3)
+
/*
* Internal Memory.
*/
--- /dev/null
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9261.h]
+ *
+ * Copyright (C) SAN People
+ *
+ * Common definitions.
+ * Based on AT91SAM9261 datasheet revision E. (Preliminary)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9261_H
+#define AT91SAM9261_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripherals */
+#define AT91SAM9261_ID_PIOA 2 /* Parallel IO Controller A */
+#define AT91SAM9261_ID_PIOB 3 /* Parallel IO Controller B */
+#define AT91SAM9261_ID_PIOC 4 /* Parallel IO Controller C */
+#define AT91SAM9261_ID_US0 6 /* USART 0 */
+#define AT91SAM9261_ID_US1 7 /* USART 1 */
+#define AT91SAM9261_ID_US2 8 /* USART 2 */
+#define AT91SAM9261_ID_MCI 9 /* Multimedia Card Interface */
+#define AT91SAM9261_ID_UDP 10 /* USB Device Port */
+#define AT91SAM9261_ID_TWI 11 /* Two-Wire Interface */
+#define AT91SAM9261_ID_SPI0 12 /* Serial Peripheral Interface 0 */
+#define AT91SAM9261_ID_SPI1 13 /* Serial Peripheral Interface 1 */
+#define AT91SAM9261_ID_SSC0 14 /* Serial Synchronous Controller 0 */
+#define AT91SAM9261_ID_SSC1 15 /* Serial Synchronous Controller 1 */
+#define AT91SAM9261_ID_SSC2 16 /* Serial Synchronous Controller 2 */
+#define AT91SAM9261_ID_TC0 17 /* Timer Counter 0 */
+#define AT91SAM9261_ID_TC1 18 /* Timer Counter 1 */
+#define AT91SAM9261_ID_TC2 19 /* Timer Counter 2 */
+#define AT91SAM9261_ID_UHP 20 /* USB Host port */
+#define AT91SAM9261_ID_LCDC 21 /* LDC Controller */
+#define AT91SAM9261_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9261_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */
+#define AT91SAM9261_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9261_BASE_TCB0 0xfffa0000
+#define AT91SAM9261_BASE_TC0 0xfffa0000
+#define AT91SAM9261_BASE_TC1 0xfffa0040
+#define AT91SAM9261_BASE_TC2 0xfffa0080
+#define AT91SAM9261_BASE_UDP 0xfffa4000
+#define AT91SAM9261_BASE_MCI 0xfffa8000
+#define AT91SAM9261_BASE_TWI 0xfffac000
+#define AT91SAM9261_BASE_US0 0xfffb0000
+#define AT91SAM9261_BASE_US1 0xfffb4000
+#define AT91SAM9261_BASE_US2 0xfffb8000
+#define AT91SAM9261_BASE_SSC0 0xfffbc000
+#define AT91SAM9261_BASE_SSC1 0xfffc0000
+#define AT91SAM9261_BASE_SSC2 0xfffc4000
+#define AT91SAM9261_BASE_SPI0 0xfffc8000
+#define AT91SAM9261_BASE_SPI1 0xfffcc000
+#define AT91_BASE_SYS 0xffffea00
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
+
+#define AT91_USART0 AT91SAM9261_BASE_US0
+#define AT91_USART1 AT91SAM9261_BASE_US1
+#define AT91_USART2 AT91SAM9261_BASE_US2
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9261_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+#define AT91SAM9261_SRAM_SIZE 0x00028000 /* Internal SRAM size (160Kb) */
+
+#define AT91SAM9261_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91SAM9261_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
+
+#define AT91SAM9261_UHP_BASE 0x00500000 /* USB Host controller */
+#define AT91SAM9261_LCDC_BASE 0x00600000 /* LDC controller */
+
+
+#endif
--- /dev/null
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9261_matrix.h]
+ *
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9261_MATRIX_H
+#define AT91SAM9261_MATRIX_H
+
+#define AT91_MATRIX_MCFG (AT91_MATRIX + 0x00) /* Master Configuration Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x04) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x08) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x0C) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x10) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x14) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
+
+#define AT91_MATRIX_TCR (AT91_MATRIX + 0x24) /* TCM Configuration Register */
+#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
+#define AT91_MATRIX_ITCM_0 (0 << 0)
+#define AT91_MATRIX_ITCM_16 (5 << 0)
+#define AT91_MATRIX_ITCM_32 (6 << 0)
+#define AT91_MATRIX_ITCM_64 (7 << 0)
+#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
+#define AT91_MATRIX_DTCM_0 (0 << 4)
+#define AT91_MATRIX_DTCM_16 (5 << 4)
+#define AT91_MATRIX_DTCM_32 (6 << 4)
+#define AT91_MATRIX_DTCM_64 (7 << 4)
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x30) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+
+#define AT91_MATRIX_USBPUCR (AT91_MATRIX + 0x34) /* USB Pad Pull-Up Control Register */
+#define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */
+
+#endif
--- /dev/null
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9263.h]
+ *
+ * (C) 2007 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_H
+#define AT91SAM9263_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripherals */
+#define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */
+#define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */
+#define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */
+#define AT91SAM9263_ID_US0 7 /* USART 0 */
+#define AT91SAM9263_ID_US1 8 /* USART 1 */
+#define AT91SAM9263_ID_US2 9 /* USART 2 */
+#define AT91SAM9263_ID_MCI0 10 /* Multimedia Card Interface 0 */
+#define AT91SAM9263_ID_MCI1 11 /* Multimedia Card Interface 1 */
+#define AT91SAM9263_ID_CAN 12 /* CAN */
+#define AT91SAM9263_ID_TWI 13 /* Two-Wire Interface */
+#define AT91SAM9263_ID_SPI0 14 /* Serial Peripheral Interface 0 */
+#define AT91SAM9263_ID_SPI1 15 /* Serial Peripheral Interface 1 */
+#define AT91SAM9263_ID_SSC0 16 /* Serial Synchronous Controller 0 */
+#define AT91SAM9263_ID_SSC1 17 /* Serial Synchronous Controller 1 */
+#define AT91SAM9263_ID_AC97C 18 /* AC97 Controller */
+#define AT91SAM9263_ID_TCB 19 /* Timer Counter 0, 1 and 2 */
+#define AT91SAM9263_ID_PWMC 20 /* Pulse Width Modulation Controller */
+#define AT91SAM9263_ID_EMAC 21 /* Ethernet */
+#define AT91SAM9263_ID_2DGE 23 /* 2D Graphic Engine */
+#define AT91SAM9263_ID_UDP 24 /* USB Device Port */
+#define AT91SAM9263_ID_ISI 25 /* Image Sensor Interface */
+#define AT91SAM9263_ID_LCDC 26 /* LCD Controller */
+#define AT91SAM9263_ID_DMA 27 /* DMA Controller */
+#define AT91SAM9263_ID_UHP 29 /* USB Host port */
+#define AT91SAM9263_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9263_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9263_BASE_UDP 0xfff78000
+#define AT91SAM9263_BASE_TCB0 0xfff7c000
+#define AT91SAM9263_BASE_TC0 0xfff7c000
+#define AT91SAM9263_BASE_TC1 0xfff7c040
+#define AT91SAM9263_BASE_TC2 0xfff7c080
+#define AT91SAM9263_BASE_MCI0 0xfff80000
+#define AT91SAM9263_BASE_MCI1 0xfff84000
+#define AT91SAM9263_BASE_TWI 0xfff88000
+#define AT91SAM9263_BASE_US0 0xfff8c000
+#define AT91SAM9263_BASE_US1 0xfff90000
+#define AT91SAM9263_BASE_US2 0xfff94000
+#define AT91SAM9263_BASE_SSC0 0xfff98000
+#define AT91SAM9263_BASE_SSC1 0xfff9c000
+#define AT91SAM9263_BASE_AC97C 0xfffa0000
+#define AT91SAM9263_BASE_SPI0 0xfffa4000
+#define AT91SAM9263_BASE_SPI1 0xfffa8000
+#define AT91SAM9263_BASE_CAN 0xfffac000
+#define AT91SAM9263_BASE_PWMC 0xfffb8000
+#define AT91SAM9263_BASE_EMAC 0xfffbc000
+#define AT91SAM9263_BASE_ISI 0xfffc4000
+#define AT91SAM9263_BASE_2DGE 0xfffc8000
+#define AT91_BASE_SYS 0xffffe000
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC0 (0xffffe000 - AT91_BASE_SYS)
+#define AT91_SDRAMC0 (0xffffe200 - AT91_BASE_SYS)
+#define AT91_SMC0 (0xffffe400 - AT91_BASE_SYS)
+#define AT91_ECC1 (0xffffe600 - AT91_BASE_SYS)
+#define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS)
+#define AT91_SMC1 (0xffffea00 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS)
+#define AT91_CCFG (0xffffed10 - AT91_BASE_SYS)
+#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT0 (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_RTT1 (0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
+
+#define AT91_USART0 AT91SAM9263_BASE_US0
+#define AT91_USART1 AT91SAM9263_BASE_US1
+#define AT91_USART2 AT91SAM9263_BASE_US2
+
+#define AT91_SMC AT91_SMC0
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9263_SRAM0_BASE 0x00300000 /* Internal SRAM 0 base address */
+#define AT91SAM9263_SRAM0_SIZE (80 * SZ_1K) /* Internal SRAM 0 size (80Kb) */
+
+#define AT91SAM9263_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91SAM9263_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */
+
+#define AT91SAM9263_SRAM1_BASE 0x00500000 /* Internal SRAM 1 base address */
+#define AT91SAM9263_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */
+
+#define AT91SAM9263_LCDC_BASE 0x00700000 /* LCD Controller */
+#define AT91SAM9263_DMAC_BASE 0x00800000 /* DMA Controller */
+#define AT91SAM9263_UHP_BASE 0x00a00000 /* USB Host controller */
+
+
+#endif
--- /dev/null
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9263_matrix.h]
+ *
+ * Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_MATRIX_H
+#define AT91SAM9263_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
+#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
+#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_RCB2 (1 << 2)
+#define AT91_MATRIX_RCB3 (1 << 3)
+#define AT91_MATRIX_RCB4 (1 << 4)
+#define AT91_MATRIX_RCB5 (1 << 5)
+#define AT91_MATRIX_RCB6 (1 << 6)
+#define AT91_MATRIX_RCB7 (1 << 7)
+#define AT91_MATRIX_RCB8 (1 << 8)
+
+#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */
+#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
+#define AT91_MATRIX_ITCM_0 (0 << 0)
+#define AT91_MATRIX_ITCM_16 (5 << 0)
+#define AT91_MATRIX_ITCM_32 (6 << 0)
+#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
+#define AT91_MATRIX_DTCM_0 (0 << 4)
+#define AT91_MATRIX_DTCM_16 (5 << 4)
+#define AT91_MATRIX_DTCM_32 (6 << 4)
+
+#define AT91_MATRIX_EBI0CSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */
+#define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_EBI0_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_EBI0_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_EBI0_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_EBI0_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_EBI0_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_EBI0_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_EBI0_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_EBI0_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_EBI0_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI0_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16)
+
+#define AT91_MATRIX_EBI1CSA (AT91_MATRIX + 0x124) /* EBI1 Chip Select Assignment Register */
+#define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_EBI1_CS2A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_EBI1_CS2A_SMC (0 << 3)
+#define AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_EBI1_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI1_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_EBI1_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_EBI1_VDDIOMSEL_3_3V (1 << 16)
+
+#endif
--- /dev/null
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9rl.h]
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Common definitions.
+ * Based on AT91SAM9RL datasheet revision A. (Preliminary)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef AT91SAM9RL_H
+#define AT91SAM9RL_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Controller */
+#define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */
+#define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */
+#define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */
+#define AT91SAM9RL_ID_PIOD 5 /* Parallel IO Controller D */
+#define AT91SAM9RL_ID_US0 6 /* USART 0 */
+#define AT91SAM9RL_ID_US1 7 /* USART 1 */
+#define AT91SAM9RL_ID_US2 8 /* USART 2 */
+#define AT91SAM9RL_ID_US3 9 /* USART 3 */
+#define AT91SAM9RL_ID_MCI 10 /* Multimedia Card Interface */
+#define AT91SAM9RL_ID_TWI0 11 /* TWI 0 */
+#define AT91SAM9RL_ID_TWI1 12 /* TWI 1 */
+#define AT91SAM9RL_ID_SPI 13 /* Serial Peripheral Interface */
+#define AT91SAM9RL_ID_SSC0 14 /* Serial Synchronous Controller 0 */
+#define AT91SAM9RL_ID_SSC1 15 /* Serial Synchronous Controller 1 */
+#define AT91SAM9RL_ID_TC0 16 /* Timer Counter 0 */
+#define AT91SAM9RL_ID_TC1 17 /* Timer Counter 1 */
+#define AT91SAM9RL_ID_TC2 18 /* Timer Counter 2 */
+#define AT91SAM9RL_ID_PWMC 19 /* Pulse Width Modulation Controller */
+#define AT91SAM9RL_ID_TSC 20 /* Touch Screen Controller */
+#define AT91SAM9RL_ID_DMA 21 /* DMA Controller */
+#define AT91SAM9RL_ID_UDPHS 22 /* USB Device HS */
+#define AT91SAM9RL_ID_LCDC 23 /* LCD Controller */
+#define AT91SAM9RL_ID_AC97C 24 /* AC97 Controller */
+#define AT91SAM9RL_ID_IRQ0 31 /* Advanced Interrupt Controller (IRQ0) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9RL_BASE_TCB0 0xfffa0000
+#define AT91SAM9RL_BASE_TC0 0xfffa0000
+#define AT91SAM9RL_BASE_TC1 0xfffa0040
+#define AT91SAM9RL_BASE_TC2 0xfffa0080
+#define AT91SAM9RL_BASE_MCI 0xfffa4000
+#define AT91SAM9RL_BASE_TWI0 0xfffa8000
+#define AT91SAM9RL_BASE_TWI1 0xfffac000
+#define AT91SAM9RL_BASE_US0 0xfffb0000
+#define AT91SAM9RL_BASE_US1 0xfffb4000
+#define AT91SAM9RL_BASE_US2 0xfffb8000
+#define AT91SAM9RL_BASE_US3 0xfffbc000
+#define AT91SAM9RL_BASE_SSC0 0xfffc0000
+#define AT91SAM9RL_BASE_SSC1 0xfffc4000
+#define AT91SAM9RL_BASE_PWMC 0xfffc8000
+#define AT91SAM9RL_BASE_SPI 0xfffcc000
+#define AT91SAM9RL_BASE_TSC 0xfffd0000
+#define AT91SAM9RL_BASE_UDPHS 0xfffd4000
+#define AT91SAM9RL_BASE_AC97C 0xfffd8000
+#define AT91_BASE_SYS 0xffffc000
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_DMA (0xffffe600 - AT91_BASE_SYS)
+#define AT91_ECC (0xffffe800 - AT91_BASE_SYS)
+#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
+#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
+#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS)
+
+#define AT91_USART0 AT91SAM9RL_BASE_US0
+#define AT91_USART1 AT91SAM9RL_BASE_US1
+#define AT91_USART2 AT91SAM9RL_BASE_US2
+#define AT91_USART3 AT91SAM9RL_BASE_US3
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9RL_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+#define AT91SAM9RL_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */
+
+#define AT91SAM9RL_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */
+
+#define AT91SAM9RL_LCDC_BASE 0x00500000 /* LCD Controller */
+#define AT91SAM9RL_UDPHS_BASE 0x00600000 /* USB Device HS controller */
+
+#endif
--- /dev/null
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9rl_matrix.h]
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9RL datasheet revision A. (Preliminary)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef AT91SAM9RL_MATRIX_H
+#define AT91SAM9RL_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_RCB2 (1 << 2)
+#define AT91_MATRIX_RCB3 (1 << 3)
+#define AT91_MATRIX_RCB4 (1 << 4)
+#define AT91_MATRIX_RCB5 (1 << 5)
+
+#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */
+#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
+#define AT91_MATRIX_ITCM_0 (0 << 0)
+#define AT91_MATRIX_ITCM_16 (5 << 0)
+#define AT91_MATRIX_ITCM_32 (6 << 0)
+#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
+#define AT91_MATRIX_DTCM_0 (0 << 4)
+#define AT91_MATRIX_DTCM_16 (5 << 4)
+#define AT91_MATRIX_DTCM_32 (6 << 4)
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */
+#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
+
+
+#endif
return AT91_MASTER_CLOCK;
}
+static inline unsigned long get_lcdc_clk_rate(unsigned int dev_id)
+{
+ return AT91_MASTER_CLOCK;
+}
+
+
#endif /* __ASM_ARM_ARCH_CLK_H__ */
#define AT91_PMC_UHP AT91SAM926x_PMC_UHP
#elif defined(CONFIG_AT91SAM9261)
#include <asm/arch/at91sam9261.h>
+#define AT91_BASE_SPI AT91SAM9261_BASE_SPI0
+#define AT91_ID_UHP AT91SAM9261_ID_UHP
+#define AT91_PMC_UHP AT91SAM926x_PMC_UHP
#elif defined(CONFIG_AT91SAM9263)
#include <asm/arch/at91sam9263.h>
+#define AT91_BASE_EMAC AT91SAM9263_BASE_EMAC
+#define AT91_BASE_SPI AT91SAM9263_BASE_SPI0
+#define AT91_ID_UHP AT91SAM9263_ID_UHP
+#define AT91_PMC_UHP AT91SAM926x_PMC_UHP
#elif defined(CONFIG_AT91SAM9RL)
#include <asm/arch/at91sam9rl.h>
+#define AT91_BASE_SPI AT91SAM9RL_BASE_SPI
+#define AT91_ID_UHP AT91SAM9RL_ID_UHP
#elif defined(CONFIG_AT91CAP9)
#include <asm/arch/at91cap9.h>
#define AT91_BASE_EMAC AT91CAP9_BASE_EMAC
#error "Unsupported AT91 processor"
#endif
-/*
- * container_of - cast a member of a structure out to the containing structure
- *
- * @ptr: the pointer to the member.
- * @type: the type of the container struct this is embedded in.
- * @member: the name of the member within the struct.
- */
-#define container_of(ptr, type, member) ({ \
- const typeof(((type *)0)->member) *__mptr = (ptr); \
- (type *)((char *)__mptr - offsetof(type, member)); })
-
#endif
/* Currently, all the AP700x chips have these */
#define AT32AP700x_CHIP_HAS_USART
#define AT32AP700x_CHIP_HAS_MMCI
+#define AT32AP700x_CHIP_HAS_SPI
/* Only AP7000 has ethernet interface */
#ifdef CONFIG_AT32AP7000
return get_pba_clk_rate();
}
#endif
-#ifdef AT32AP700x_CHIP_HAS_USART
+#ifdef AT32AP700x_CHIP_HAS_MACB
static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
{
return get_pbb_clk_rate();
return get_pbb_clk_rate();
}
#endif
+#ifdef AT32AP700x_CHIP_HAS_SPI
+static inline unsigned long get_spi_clk_rate(unsigned int dev_id)
+{
+ return get_pba_clk_rate();
+}
+#endif
+
+extern void clk_init(void);
/* Board code may need the SDRAM base clock as a compile-time constant */
#define SDRAMC_BUS_HZ (MAIN_CLK_RATE >> CFG_CLKDIV_HSB)
#ifdef AT32AP700x_CHIP_HAS_MMCI
void gpio_enable_mmci(void);
#endif
+#ifdef AT32AP700x_CHIP_HAS_SPI
+void gpio_enable_spi0(unsigned long cs_mask);
+void gpio_enable_spi1(unsigned long cs_mask);
+#endif
#endif /* __ASM_AVR32_ARCH_GPIO_H__ */
--- /dev/null
+/*
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_ARCH_HMATRIX_H__
+#define __ASM_AVR32_ARCH_HMATRIX_H__
+
+#include <asm/hmatrix-common.h>
+
+/* Bitfields in SFR4 (EBI) */
+#define HMATRIX_EBI_SDRAM_ENABLE_OFFSET 1
+#define HMATRIX_EBI_SDRAM_ENABLE_SIZE 1
+#define HMATRIX_EBI_NAND_ENABLE_OFFSET 3
+#define HMATRIX_EBI_NAND_ENABLE_SIZE 1
+#define HMATRIX_EBI_CF0_ENABLE_OFFSET 4
+#define HMATRIX_EBI_CF0_ENABLE_SIZE 1
+#define HMATRIX_EBI_CF1_ENABLE_OFFSET 5
+#define HMATRIX_EBI_CF1_ENABLE_SIZE 1
+#define HMATRIX_EBI_PULLUP_DISABLE_OFFSET 8
+#define HMATRIX_EBI_PULLUP_DISABLE_SIZE 1
+
+/* HSB masters */
+#define HMATRIX_MASTER_CPU_DCACHE 0
+#define HMATRIX_MASTER_CPU_ICACHE 1
+#define HMATRIX_MASTER_PDC 2
+#define HMATRIX_MASTER_ISI 3
+#define HMATRIX_MASTER_USBA 4
+#define HMATRIX_MASTER_LCDC 5
+#define HMATRIX_MASTER_MACB0 6
+#define HMATRIX_MASTER_MACB1 7
+#define HMATRIX_MASTER_DMACA_M0 8
+#define HMATRIX_MASTER_DMACA_M1 9
+
+/* HSB slaves */
+#define HMATRIX_SLAVE_SRAM0 0
+#define HMATRIX_SLAVE_SRAM1 1
+#define HMATRIX_SLAVE_PBA 2
+#define HMATRIX_SLAVE_PBB 3
+#define HMATRIX_SLAVE_EBI 4
+#define HMATRIX_SLAVE_USBA 5
+#define HMATRIX_SLAVE_LCDC 6
+#define HMATRIX_SLAVE_DMACA 7
+
+#endif /* __ASM_AVR32_ARCH_HMATRIX_H__ */
+++ /dev/null
-/*
- * Register definition for the High-speed Bus Matrix
- */
-#ifndef __ASM_AVR32_HMATRIX2_H__
-#define __ASM_AVR32_HMATRIX2_H__
-
-/* HMATRIX2 register offsets */
-#define HMATRIX2_MCFG0 0x0000
-#define HMATRIX2_MCFG1 0x0004
-#define HMATRIX2_MCFG2 0x0008
-#define HMATRIX2_MCFG3 0x000c
-#define HMATRIX2_MCFG4 0x0010
-#define HMATRIX2_MCFG5 0x0014
-#define HMATRIX2_MCFG6 0x0018
-#define HMATRIX2_MCFG7 0x001c
-#define HMATRIX2_MCFG8 0x0020
-#define HMATRIX2_MCFG9 0x0024
-#define HMATRIX2_MCFG10 0x0028
-#define HMATRIX2_MCFG11 0x002c
-#define HMATRIX2_MCFG12 0x0030
-#define HMATRIX2_MCFG13 0x0034
-#define HMATRIX2_MCFG14 0x0038
-#define HMATRIX2_MCFG15 0x003c
-#define HMATRIX2_SCFG0 0x0040
-#define HMATRIX2_SCFG1 0x0044
-#define HMATRIX2_SCFG2 0x0048
-#define HMATRIX2_SCFG3 0x004c
-#define HMATRIX2_SCFG4 0x0050
-#define HMATRIX2_SCFG5 0x0054
-#define HMATRIX2_SCFG6 0x0058
-#define HMATRIX2_SCFG7 0x005c
-#define HMATRIX2_SCFG8 0x0060
-#define HMATRIX2_SCFG9 0x0064
-#define HMATRIX2_SCFG10 0x0068
-#define HMATRIX2_SCFG11 0x006c
-#define HMATRIX2_SCFG12 0x0070
-#define HMATRIX2_SCFG13 0x0074
-#define HMATRIX2_SCFG14 0x0078
-#define HMATRIX2_SCFG15 0x007c
-#define HMATRIX2_PRAS0 0x0080
-#define HMATRIX2_PRBS0 0x0084
-#define HMATRIX2_PRAS1 0x0088
-#define HMATRIX2_PRBS1 0x008c
-#define HMATRIX2_PRAS2 0x0090
-#define HMATRIX2_PRBS2 0x0094
-#define HMATRIX2_PRAS3 0x0098
-#define HMATRIX2_PRBS3 0x009c
-#define HMATRIX2_PRAS4 0x00a0
-#define HMATRIX2_PRBS4 0x00a4
-#define HMATRIX2_PRAS5 0x00a8
-#define HMATRIX2_PRBS5 0x00ac
-#define HMATRIX2_PRAS6 0x00b0
-#define HMATRIX2_PRBS6 0x00b4
-#define HMATRIX2_PRAS7 0x00b8
-#define HMATRIX2_PRBS7 0x00bc
-#define HMATRIX2_PRAS8 0x00c0
-#define HMATRIX2_PRBS8 0x00c4
-#define HMATRIX2_PRAS9 0x00c8
-#define HMATRIX2_PRBS9 0x00cc
-#define HMATRIX2_PRAS10 0x00d0
-#define HMATRIX2_PRBS10 0x00d4
-#define HMATRIX2_PRAS11 0x00d8
-#define HMATRIX2_PRBS11 0x00dc
-#define HMATRIX2_PRAS12 0x00e0
-#define HMATRIX2_PRBS12 0x00e4
-#define HMATRIX2_PRAS13 0x00e8
-#define HMATRIX2_PRBS13 0x00ec
-#define HMATRIX2_PRAS14 0x00f0
-#define HMATRIX2_PRBS14 0x00f4
-#define HMATRIX2_PRAS15 0x00f8
-#define HMATRIX2_PRBS15 0x00fc
-#define HMATRIX2_MRCR 0x0100
-#define HMATRIX2_SFR0 0x0110
-#define HMATRIX2_SFR1 0x0114
-#define HMATRIX2_SFR2 0x0118
-#define HMATRIX2_SFR3 0x011c
-#define HMATRIX2_SFR4 0x0120
-#define HMATRIX2_SFR5 0x0124
-#define HMATRIX2_SFR6 0x0128
-#define HMATRIX2_SFR7 0x012c
-#define HMATRIX2_SFR8 0x0130
-#define HMATRIX2_SFR9 0x0134
-#define HMATRIX2_SFR10 0x0138
-#define HMATRIX2_SFR11 0x013c
-#define HMATRIX2_SFR12 0x0140
-#define HMATRIX2_SFR13 0x0144
-#define HMATRIX2_SFR14 0x0148
-#define HMATRIX2_SFR15 0x014c
-#define HMATRIX2_VERSION 0x01fc
-
-/* Bitfields in MCFG0 */
-#define HMATRIX2_ULBT_OFFSET 0
-#define HMATRIX2_ULBT_SIZE 3
-
-/* Bitfields in SCFG0 */
-#define HMATRIX2_SLOT_CYCLE_OFFSET 0
-#define HMATRIX2_SLOT_CYCLE_SIZE 8
-#define HMATRIX2_DEFMSTR_TYPE_OFFSET 16
-#define HMATRIX2_DEFMSTR_TYPE_SIZE 2
-#define HMATRIX2_FIXED_DEFMSTR_OFFSET 18
-#define HMATRIX2_FIXED_DEFMSTR_SIZE 4
-#define HMATRIX2_ARBT_OFFSET 24
-#define HMATRIX2_ARBT_SIZE 2
-
-/* Bitfields in PRAS0 */
-#define HMATRIX2_M0PR_OFFSET 0
-#define HMATRIX2_M0PR_SIZE 4
-#define HMATRIX2_M1PR_OFFSET 4
-#define HMATRIX2_M1PR_SIZE 4
-#define HMATRIX2_M2PR_OFFSET 8
-#define HMATRIX2_M2PR_SIZE 4
-#define HMATRIX2_M3PR_OFFSET 12
-#define HMATRIX2_M3PR_SIZE 4
-#define HMATRIX2_M4PR_OFFSET 16
-#define HMATRIX2_M4PR_SIZE 4
-#define HMATRIX2_M5PR_OFFSET 20
-#define HMATRIX2_M5PR_SIZE 4
-#define HMATRIX2_M6PR_OFFSET 24
-#define HMATRIX2_M6PR_SIZE 4
-#define HMATRIX2_M7PR_OFFSET 28
-#define HMATRIX2_M7PR_SIZE 4
-
-/* Bitfields in PRBS0 */
-#define HMATRIX2_M8PR_OFFSET 0
-#define HMATRIX2_M8PR_SIZE 4
-#define HMATRIX2_M9PR_OFFSET 4
-#define HMATRIX2_M9PR_SIZE 4
-#define HMATRIX2_M10PR_OFFSET 8
-#define HMATRIX2_M10PR_SIZE 4
-#define HMATRIX2_M11PR_OFFSET 12
-#define HMATRIX2_M11PR_SIZE 4
-#define HMATRIX2_M12PR_OFFSET 16
-#define HMATRIX2_M12PR_SIZE 4
-#define HMATRIX2_M13PR_OFFSET 20
-#define HMATRIX2_M13PR_SIZE 4
-#define HMATRIX2_M14PR_OFFSET 24
-#define HMATRIX2_M14PR_SIZE 4
-#define HMATRIX2_M15PR_OFFSET 28
-#define HMATRIX2_M15PR_SIZE 4
-
-/* Bitfields in MRCR */
-#define HMATRIX2_RBC0_OFFSET 0
-#define HMATRIX2_RBC0_SIZE 1
-#define HMATRIX2_RBC1_OFFSET 1
-#define HMATRIX2_RBC1_SIZE 1
-#define HMATRIX2_RBC2_OFFSET 2
-#define HMATRIX2_RBC2_SIZE 1
-#define HMATRIX2_RBC3_OFFSET 3
-#define HMATRIX2_RBC3_SIZE 1
-#define HMATRIX2_RBC4_OFFSET 4
-#define HMATRIX2_RBC4_SIZE 1
-#define HMATRIX2_RBC5_OFFSET 5
-#define HMATRIX2_RBC5_SIZE 1
-#define HMATRIX2_RBC6_OFFSET 6
-#define HMATRIX2_RBC6_SIZE 1
-#define HMATRIX2_RBC7_OFFSET 7
-#define HMATRIX2_RBC7_SIZE 1
-#define HMATRIX2_RBC8_OFFSET 8
-#define HMATRIX2_RBC8_SIZE 1
-#define HMATRIX2_RBC9_OFFSET 9
-#define HMATRIX2_RBC9_SIZE 1
-#define HMATRIX2_RBC10_OFFSET 10
-#define HMATRIX2_RBC10_SIZE 1
-#define HMATRIX2_RBC11_OFFSET 11
-#define HMATRIX2_RBC11_SIZE 1
-#define HMATRIX2_RBC12_OFFSET 12
-#define HMATRIX2_RBC12_SIZE 1
-#define HMATRIX2_RBC13_OFFSET 13
-#define HMATRIX2_RBC13_SIZE 1
-#define HMATRIX2_RBC14_OFFSET 14
-#define HMATRIX2_RBC14_SIZE 1
-#define HMATRIX2_RBC15_OFFSET 15
-#define HMATRIX2_RBC15_SIZE 1
-
-/* Bitfields in SFR0 */
-#define HMATRIX2_SFR_OFFSET 0
-#define HMATRIX2_SFR_SIZE 32
-
-/* Bitfields in SFR4 */
-#define HMATRIX2_CS1A_OFFSET 1
-#define HMATRIX2_CS1A_SIZE 1
-#define HMATRIX2_CS3A_OFFSET 3
-#define HMATRIX2_CS3A_SIZE 1
-#define HMATRIX2_CS4A_OFFSET 4
-#define HMATRIX2_CS4A_SIZE 1
-#define HMATRIX2_CS5A_OFFSET 5
-#define HMATRIX2_CS5A_SIZE 1
-#define HMATRIX2_DBPUC_OFFSET 8
-#define HMATRIX2_DBPUC_SIZE 1
-
-/* Bitfields in VERSION */
-#define HMATRIX2_VERSION_OFFSET 0
-#define HMATRIX2_VERSION_SIZE 12
-#define HMATRIX2_MFN_OFFSET 16
-#define HMATRIX2_MFN_SIZE 3
-
-/* Constants for ULBT */
-#define HMATRIX2_ULBT_INFINITE 0
-#define HMATRIX2_ULBT_SINGLE 1
-#define HMATRIX2_ULBT_FOUR_BEAT 2
-#define HMATRIX2_ULBT_SIXTEEN_BEAT 4
-
-/* Constants for DEFMSTR_TYPE */
-#define HMATRIX2_DEFMSTR_TYPE_NO_DEFAULT 0
-#define HMATRIX2_DEFMSTR_TYPE_LAST_DEFAULT 1
-#define HMATRIX2_DEFMSTR_TYPE_FIXED_DEFAULT 2
-
-/* Constants for ARBT */
-#define HMATRIX2_ARBT_ROUND_ROBIN 0
-#define HMATRIX2_ARBT_FIXED_PRIORITY 1
-
-/* Bit manipulation macros */
-#define HMATRIX2_BIT(name) \
- (1 << HMATRIX2_##name##_OFFSET)
-#define HMATRIX2_BF(name,value) \
- (((value) & ((1 << HMATRIX2_##name##_SIZE) - 1)) \
- << HMATRIX2_##name##_OFFSET)
-#define HMATRIX2_BFEXT(name,value) \
- (((value) >> HMATRIX2_##name##_OFFSET) \
- & ((1 << HMATRIX2_##name##_SIZE) - 1))
-#define HMATRIX2_BFINS(name,value,old) \
- (((old) & ~(((1 << HMATRIX2_##name##_SIZE) - 1) \
- << HMATRIX2_##name##_OFFSET)) \
- | HMATRIX2_BF(name,value))
-
-/* Register access macros */
-#define hmatrix2_readl(reg) \
- readl((void *)HMATRIX_BASE + HMATRIX2_##reg)
-#define hmatrix2_writel(reg,value) \
- writel((value), (void *)HMATRIX_BASE + HMATRIX2_##reg)
-
-#endif /* __ASM_AVR32_HMATRIX2_H__ */
#ifndef __AT32AP7000_MEMORY_MAP_H__
#define __AT32AP7000_MEMORY_MAP_H__
+/* Internal and external memories */
+#define EBI_SRAM_CS0_BASE 0x00000000
+#define EBI_SRAM_CS0_SIZE 0x04000000
+#define EBI_SRAM_CS4_BASE 0x04000000
+#define EBI_SRAM_CS4_SIZE 0x04000000
+#define EBI_SRAM_CS2_BASE 0x08000000
+#define EBI_SRAM_CS2_SIZE 0x04000000
+#define EBI_SRAM_CS3_BASE 0x0c000000
+#define EBI_SRAM_CS3_SIZE 0x04000000
+#define EBI_SRAM_CS1_BASE 0x10000000
+#define EBI_SRAM_CS1_SIZE 0x10000000
+#define EBI_SRAM_CS5_BASE 0x20000000
+#define EBI_SRAM_CS5_SIZE 0x04000000
+
+#define EBI_SDRAM_BASE EBI_SRAM_CS1_BASE
+#define EBI_SDRAM_SIZE EBI_SRAM_CS1_SIZE
+
+#define INTERNAL_SRAM_BASE 0x24000000
+#define INTERNAL_SRAM_SIZE 0x00008000
+
/* Devices on the High Speed Bus (HSB) */
#define LCDC_BASE 0xFF000000
#define DMAC_BASE 0xFF200000
--- /dev/null
+/*
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_HMATRIX_COMMON_H__
+#define __ASM_AVR32_HMATRIX_COMMON_H__
+
+/* HMATRIX register offsets */
+struct hmatrix_regs {
+ u32 MCFG[16];
+ u32 SCFG[16];
+ struct {
+ u32 A;
+ u32 B;
+ } PRS[16];
+ u32 MRCR;
+ u32 __reserved[3];
+ u32 SFR[16];
+};
+
+/* Bitfields in MCFG */
+#define HMATRIX_ULBT_OFFSET 0
+#define HMATRIX_ULBT_SIZE 3
+
+/* Bitfields in SCFG */
+#define HMATRIX_SLOT_CYCLE_OFFSET 0
+#define HMATRIX_SLOT_CYCLE_SIZE 8
+#define HMATRIX_DEFMSTR_TYPE_OFFSET 16
+#define HMATRIX_DEFMSTR_TYPE_SIZE 2
+#define HMATRIX_FIXED_DEFMSTR_OFFSET 18
+#define HMATRIX_FIXED_DEFMSTR_SIZE 4
+#define HMATRIX_ARBT_OFFSET 24
+#define HMATRIX_ARBT_SIZE 1
+
+/* Bitfields in PRS.A */
+#define HMATRIX_M0PR_OFFSET 0
+#define HMATRIX_M0PR_SIZE 4
+#define HMATRIX_M1PR_OFFSET 4
+#define HMATRIX_M1PR_SIZE 4
+#define HMATRIX_M2PR_OFFSET 8
+#define HMATRIX_M2PR_SIZE 4
+#define HMATRIX_M3PR_OFFSET 12
+#define HMATRIX_M3PR_SIZE 4
+#define HMATRIX_M4PR_OFFSET 16
+#define HMATRIX_M4PR_SIZE 4
+#define HMATRIX_M5PR_OFFSET 20
+#define HMATRIX_M5PR_SIZE 4
+#define HMATRIX_M6PR_OFFSET 24
+#define HMATRIX_M6PR_SIZE 4
+#define HMATRIX_M7PR_OFFSET 28
+#define HMATRIX_M7PR_SIZE 4
+
+/* Bitfields in PRS.B */
+#define HMATRIX_M8PR_OFFSET 0
+#define HMATRIX_M8PR_SIZE 4
+#define HMATRIX_M9PR_OFFSET 4
+#define HMATRIX_M9PR_SIZE 4
+#define HMATRIX_M10PR_OFFSET 8
+#define HMATRIX_M10PR_SIZE 4
+#define HMATRIX_M11PR_OFFSET 12
+#define HMATRIX_M11PR_SIZE 4
+#define HMATRIX_M12PR_OFFSET 16
+#define HMATRIX_M12PR_SIZE 4
+#define HMATRIX_M13PR_OFFSET 20
+#define HMATRIX_M13PR_SIZE 4
+#define HMATRIX_M14PR_OFFSET 24
+#define HMATRIX_M14PR_SIZE 4
+#define HMATRIX_M15PR_OFFSET 28
+#define HMATRIX_M15PR_SIZE 4
+
+/* Constants for ULBT */
+#define HMATRIX_ULBT_INFINITE 0
+#define HMATRIX_ULBT_SINGLE 1
+#define HMATRIX_ULBT_FOUR_BEAT 2
+#define HMATRIX_ULBT_EIGHT_BEAT 3
+#define HMATRIX_ULBT_SIXTEEN_BEAT 4
+
+/* Constants for DEFMSTR_TYPE */
+#define HMATRIX_DEFMSTR_TYPE_NO_DEFAULT 0
+#define HMATRIX_DEFMSTR_TYPE_LAST_DEFAULT 1
+#define HMATRIX_DEFMSTR_TYPE_FIXED_DEFAULT 2
+
+/* Constants for ARBT */
+#define HMATRIX_ARBT_ROUND_ROBIN 0
+#define HMATRIX_ARBT_FIXED_PRIORITY 1
+
+/* Bit manipulation macros */
+#define HMATRIX_BIT(name) \
+ (1 << HMATRIX_##name##_OFFSET)
+#define HMATRIX_BF(name,value) \
+ (((value) & ((1 << HMATRIX_##name##_SIZE) - 1)) \
+ << HMATRIX_##name##_OFFSET)
+#define HMATRIX_BFEXT(name,value) \
+ (((value) >> HMATRIX_##name##_OFFSET) \
+ & ((1 << HMATRIX_##name##_SIZE) - 1))
+#define HMATRIX_BFINS(name,value,old) \
+ (((old) & ~(((1 << HMATRIX_##name##_SIZE) - 1) \
+ << HMATRIX_##name##_OFFSET)) \
+ | HMATRIX_BF(name,value))
+
+/* Register access macros */
+#define __hmatrix_reg(reg) \
+ (((volatile struct hmatrix_regs *)HMATRIX_BASE)->reg)
+#define hmatrix_read(reg) \
+ (__hmatrix_reg(reg))
+#define hmatrix_write(reg, value) \
+ do { __hmatrix_reg(reg) = (value); } while (0)
+
+#define hmatrix_slave_read(slave, reg) \
+ hmatrix_read(reg[HMATRIX_SLAVE_##slave])
+#define hmatrix_slave_write(slave, reg, value) \
+ hmatrix_write(reg[HMATRIX_SLAVE_##slave], value)
+
+#endif /* __ASM_AVR32_HMATRIX_COMMON_H__ */
#ifndef __ASM_AVR32_SDRAM_H
#define __ASM_AVR32_SDRAM_H
-struct sdram_info {
- unsigned long phys_addr;
- unsigned int row_bits, col_bits, bank_bits;
- unsigned int cas, twr, trc, trp, trcd, tras, txsr;
+struct sdram_config {
+ /* Number of data bits. */
+ enum {
+ SDRAM_DATA_16BIT,
+ SDRAM_DATA_32BIT,
+ } data_bits;
+
+ /* Number of address bits */
+ uint8_t row_bits, col_bits, bank_bits;
+
+ /* SDRAM timings in cycles */
+ uint8_t cas, twr, trc, trp, trcd, tras, txsr;
/* SDRAM refresh period in cycles */
unsigned long refresh_period;
};
-extern unsigned long sdram_init(const struct sdram_info *info);
+/*
+ * Attempt to initialize the SDRAM controller using the specified
+ * parameters. Return the expected size of the memory area based on
+ * the number of address and data bits.
+ *
+ * The caller should verify that the configuration is correct by
+ * running a memory test, e.g. get_ram_size().
+ */
+extern unsigned long sdram_init(void *sdram_base,
+ const struct sdram_config *config);
#endif /* __ASM_AVR32_SDRAM_H */
/* References to section boundaries */
extern char _text[], _etext[];
-extern char __flashprog_start[], __flashprog_end[];
extern char _data[], __data_lma[], _edata[], __edata_lma[];
extern char __got_start[], __got_lma[], __got_end[];
extern char _end[];
-/*
- * Everything in .flashprog will be locked in the icache so it doesn't
- * get disturbed when executing flash commands.
- */
-#define __flashprog __attribute__((section(".flashprog"), __noinline__))
-
#endif /* __ASM_AVR32_SECTIONS_H */
#define bi_memstart bi_dram[0].start
#define bi_memsize bi_dram[0].size
-/**
- * container_of - cast a member of a structure out to the containing structure
- *
- * @ptr: the pointer to the member.
- * @type: the type of the container struct this is embedded in.
- * @member: the name of the member within the struct.
- */
-#define container_of(ptr, type, member) ({ \
- const typeof( ((type *)0)->member ) *__mptr = (ptr); \
- (type *)( (char *)__mptr - offsetof(type,member) );})
-
#endif /* __ASM_U_BOOT_H__ */
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999, 2001, 2002 by Ralf Baechle
+ */
+#ifndef _ASM_MIPS_ERRNO_H
+#define _ASM_MIPS_ERRNO_H
+
+/*
+ * These first 34 error codes are from Linux 2.6, <asm-generic/errno-base.h>
+ */
+#define EPERM 1 /* Operation not permitted */
+#define ENOENT 2 /* No such file or directory */
+#define ESRCH 3 /* No such process */
+#define EINTR 4 /* Interrupted system call */
+#define EIO 5 /* I/O error */
+#define ENXIO 6 /* No such device or address */
+#define E2BIG 7 /* Argument list too long */
+#define ENOEXEC 8 /* Exec format error */
+#define EBADF 9 /* Bad file number */
+#define ECHILD 10 /* No child processes */
+#define EAGAIN 11 /* Try again */
+#define ENOMEM 12 /* Out of memory */
+#define EACCES 13 /* Permission denied */
+#define EFAULT 14 /* Bad address */
+#define ENOTBLK 15 /* Block device required */
+#define EBUSY 16 /* Device or resource busy */
+#define EEXIST 17 /* File exists */
+#define EXDEV 18 /* Cross-device link */
+#define ENODEV 19 /* No such device */
+#define ENOTDIR 20 /* Not a directory */
+#define EISDIR 21 /* Is a directory */
+#define EINVAL 22 /* Invalid argument */
+#define ENFILE 23 /* File table overflow */
+#define EMFILE 24 /* Too many open files */
+#define ENOTTY 25 /* Not a typewriter */
+#define ETXTBSY 26 /* Text file busy */
+#define EFBIG 27 /* File too large */
+#define ENOSPC 28 /* No space left on device */
+#define ESPIPE 29 /* Illegal seek */
+#define EROFS 30 /* Read-only file system */
+#define EMLINK 31 /* Too many links */
+#define EPIPE 32 /* Broken pipe */
+#define EDOM 33 /* Math argument out of domain of func */
+#define ERANGE 34 /* Math result not representable */
+
+/*
+ * These error numbers are intended to be MIPS ABI compatible
+ */
+#define ENOMSG 35 /* No message of desired type */
+#define EIDRM 36 /* Identifier removed */
+#define ECHRNG 37 /* Channel number out of range */
+#define EL2NSYNC 38 /* Level 2 not synchronized */
+#define EL3HLT 39 /* Level 3 halted */
+#define EL3RST 40 /* Level 3 reset */
+#define ELNRNG 41 /* Link number out of range */
+#define EUNATCH 42 /* Protocol driver not attached */
+#define ENOCSI 43 /* No CSI structure available */
+#define EL2HLT 44 /* Level 2 halted */
+#define EDEADLK 45 /* Resource deadlock would occur */
+#define ENOLCK 46 /* No record locks available */
+#define EBADE 50 /* Invalid exchange */
+#define EBADR 51 /* Invalid request descriptor */
+#define EXFULL 52 /* Exchange full */
+#define ENOANO 53 /* No anode */
+#define EBADRQC 54 /* Invalid request code */
+#define EBADSLT 55 /* Invalid slot */
+#define EDEADLOCK 56 /* File locking deadlock error */
+#define EBFONT 59 /* Bad font file format */
+#define ENOSTR 60 /* Device not a stream */
+#define ENODATA 61 /* No data available */
+#define ETIME 62 /* Timer expired */
+#define ENOSR 63 /* Out of streams resources */
+#define ENONET 64 /* Machine is not on the network */
+#define ENOPKG 65 /* Package not installed */
+#define EREMOTE 66 /* Object is remote */
+#define ENOLINK 67 /* Link has been severed */
+#define EADV 68 /* Advertise error */
+#define ESRMNT 69 /* Srmount error */
+#define ECOMM 70 /* Communication error on send */
+#define EPROTO 71 /* Protocol error */
+#define EDOTDOT 73 /* RFS specific error */
+#define EMULTIHOP 74 /* Multihop attempted */
+#define EBADMSG 77 /* Not a data message */
+#define ENAMETOOLONG 78 /* File name too long */
+#define EOVERFLOW 79 /* Value too large for defined data type */
+#define ENOTUNIQ 80 /* Name not unique on network */
+#define EBADFD 81 /* File descriptor in bad state */
+#define EREMCHG 82 /* Remote address changed */
+#define ELIBACC 83 /* Can not access a needed shared library */
+#define ELIBBAD 84 /* Accessing a corrupted shared library */
+#define ELIBSCN 85 /* .lib section in a.out corrupted */
+#define ELIBMAX 86 /* Attempting to link in too many shared libraries */
+#define ELIBEXEC 87 /* Cannot exec a shared library directly */
+#define EILSEQ 88 /* Illegal byte sequence */
+#define ENOSYS 89 /* Function not implemented */
+#define ELOOP 90 /* Too many symbolic links encountered */
+#define ERESTART 91 /* Interrupted system call should be restarted */
+#define ESTRPIPE 92 /* Streams pipe error */
+#define ENOTEMPTY 93 /* Directory not empty */
+#define EUSERS 94 /* Too many users */
+#define ENOTSOCK 95 /* Socket operation on non-socket */
+#define EDESTADDRREQ 96 /* Destination address required */
+#define EMSGSIZE 97 /* Message too long */
+#define EPROTOTYPE 98 /* Protocol wrong type for socket */
+#define ENOPROTOOPT 99 /* Protocol not available */
+#define EPROTONOSUPPORT 120 /* Protocol not supported */
+#define ESOCKTNOSUPPORT 121 /* Socket type not supported */
+#define EOPNOTSUPP 122 /* Operation not supported on transport endpoint */
+#define EPFNOSUPPORT 123 /* Protocol family not supported */
+#define EAFNOSUPPORT 124 /* Address family not supported by protocol */
+#define EADDRINUSE 125 /* Address already in use */
+#define EADDRNOTAVAIL 126 /* Cannot assign requested address */
+#define ENETDOWN 127 /* Network is down */
+#define ENETUNREACH 128 /* Network is unreachable */
+#define ENETRESET 129 /* Network dropped connection because of reset */
+#define ECONNABORTED 130 /* Software caused connection abort */
+#define ECONNRESET 131 /* Connection reset by peer */
+#define ENOBUFS 132 /* No buffer space available */
+#define EISCONN 133 /* Transport endpoint is already connected */
+#define ENOTCONN 134 /* Transport endpoint is not connected */
+#define EUCLEAN 135 /* Structure needs cleaning */
+#define ENOTNAM 137 /* Not a XENIX named type file */
+#define ENAVAIL 138 /* No XENIX semaphores available */
+#define EISNAM 139 /* Is a named type file */
+#define EREMOTEIO 140 /* Remote I/O error */
+#define EINIT 141 /* Reserved */
+#define EREMDEV 142 /* Error 142 */
+#define ESHUTDOWN 143 /* Cannot send after transport endpoint shutdown */
+#define ETOOMANYREFS 144 /* Too many references: cannot splice */
+#define ETIMEDOUT 145 /* Connection timed out */
+#define ECONNREFUSED 146 /* Connection refused */
+#define EHOSTDOWN 147 /* Host is down */
+#define EHOSTUNREACH 148 /* No route to host */
+#define EWOULDBLOCK EAGAIN /* Operation would block */
+#define EALREADY 149 /* Operation already in progress */
+#define EINPROGRESS 150 /* Operation now in progress */
+#define ESTALE 151 /* Stale NFS file handle */
+#define ECANCELED 158 /* AIO operation canceled */
+
+#endif /* _ASM_MIPS_ERRNO_H */
* Copyright (C) 2000 Silicon Graphics, Inc.
* Modified for further R[236]000 support by Paul M. Antoine, 1996.
* Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
- * Copyright (C) 2003 Maciej W. Rozycki
+ * Copyright (C) 2000, 07 MIPS Technologies, Inc.
+ * Copyright (C) 2003, 2004 Maciej W. Rozycki
*/
#ifndef _ASM_MIPSREGS_H
#define _ASM_MIPSREGS_H
#define STR(x) __STR(x)
#endif
+/*
+ * Configure language
+ */
+#ifdef __ASSEMBLY__
+#define _ULCAST_
+#else
+#define _ULCAST_ (unsigned long)
+#endif
+
/*
* Coprocessor 0 register names
*/
#define CP0_XCONTEXT $20
#define CP0_FRAMEMASK $21
#define CP0_DIAGNOSTIC $22
+#define CP0_DEBUG $23
+#define CP0_DEPC $24
#define CP0_PERFORMANCE $25
#define CP0_ECC $26
#define CP0_CACHEERR $27
#define CP0_TAGLO $28
#define CP0_TAGHI $29
#define CP0_ERROREPC $30
+#define CP0_DESAVE $31
/*
* R4640/R4650 cp0 register names. These registers are listed
#define CP0_S1_DERRADDR0 $26
#define CP0_S1_DERRADDR1 $27
#define CP0_S1_INTCONTROL $20
+
+/*
+ * Coprocessor 0 Set 2 register names
+ */
+#define CP0_S2_SRSCTL $12 /* MIPSR2 */
+
+/*
+ * Coprocessor 0 Set 3 register names
+ */
+#define CP0_S3_SRSMAP $12 /* MIPSR2 */
+
+/*
+ * TX39 Series
+ */
+#define CP0_TX39_CACHE $7
+
/*
* Coprocessor 1 (FPU) register names
*/
-#define CP1_REVISION $0
-#define CP1_STATUS $31
+#define CP1_REVISION $0
+#define CP1_STATUS $31
/*
* FPU Status Register Values
* Status Register Values
*/
-#define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */
-#define FPU_CSR_COND 0x00800000 /* $fcc0 */
-#define FPU_CSR_COND0 0x00800000 /* $fcc0 */
-#define FPU_CSR_COND1 0x02000000 /* $fcc1 */
-#define FPU_CSR_COND2 0x04000000 /* $fcc2 */
-#define FPU_CSR_COND3 0x08000000 /* $fcc3 */
-#define FPU_CSR_COND4 0x10000000 /* $fcc4 */
-#define FPU_CSR_COND5 0x20000000 /* $fcc5 */
-#define FPU_CSR_COND6 0x40000000 /* $fcc6 */
-#define FPU_CSR_COND7 0x80000000 /* $fcc7 */
+#define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */
+#define FPU_CSR_COND 0x00800000 /* $fcc0 */
+#define FPU_CSR_COND0 0x00800000 /* $fcc0 */
+#define FPU_CSR_COND1 0x02000000 /* $fcc1 */
+#define FPU_CSR_COND2 0x04000000 /* $fcc2 */
+#define FPU_CSR_COND3 0x08000000 /* $fcc3 */
+#define FPU_CSR_COND4 0x10000000 /* $fcc4 */
+#define FPU_CSR_COND5 0x20000000 /* $fcc5 */
+#define FPU_CSR_COND6 0x40000000 /* $fcc6 */
+#define FPU_CSR_COND7 0x80000000 /* $fcc7 */
/*
* X the exception cause indicator
* E the exception enable
* S the sticky/flag bit
-*/
-#define FPU_CSR_ALL_X 0x0003f000
-#define FPU_CSR_UNI_X 0x00020000
-#define FPU_CSR_INV_X 0x00010000
-#define FPU_CSR_DIV_X 0x00008000
-#define FPU_CSR_OVF_X 0x00004000
-#define FPU_CSR_UDF_X 0x00002000
-#define FPU_CSR_INE_X 0x00001000
-
-#define FPU_CSR_ALL_E 0x00000f80
-#define FPU_CSR_INV_E 0x00000800
-#define FPU_CSR_DIV_E 0x00000400
-#define FPU_CSR_OVF_E 0x00000200
-#define FPU_CSR_UDF_E 0x00000100
-#define FPU_CSR_INE_E 0x00000080
-
-#define FPU_CSR_ALL_S 0x0000007c
-#define FPU_CSR_INV_S 0x00000040
-#define FPU_CSR_DIV_S 0x00000020
-#define FPU_CSR_OVF_S 0x00000010
-#define FPU_CSR_UDF_S 0x00000008
-#define FPU_CSR_INE_S 0x00000004
+ */
+#define FPU_CSR_ALL_X 0x0003f000
+#define FPU_CSR_UNI_X 0x00020000
+#define FPU_CSR_INV_X 0x00010000
+#define FPU_CSR_DIV_X 0x00008000
+#define FPU_CSR_OVF_X 0x00004000
+#define FPU_CSR_UDF_X 0x00002000
+#define FPU_CSR_INE_X 0x00001000
-/* rounding mode */
-#define FPU_CSR_RN 0x0 /* nearest */
-#define FPU_CSR_RZ 0x1 /* towards zero */
-#define FPU_CSR_RU 0x2 /* towards +Infinity */
-#define FPU_CSR_RD 0x3 /* towards -Infinity */
+#define FPU_CSR_ALL_E 0x00000f80
+#define FPU_CSR_INV_E 0x00000800
+#define FPU_CSR_DIV_E 0x00000400
+#define FPU_CSR_OVF_E 0x00000200
+#define FPU_CSR_UDF_E 0x00000100
+#define FPU_CSR_INE_E 0x00000080
+#define FPU_CSR_ALL_S 0x0000007c
+#define FPU_CSR_INV_S 0x00000040
+#define FPU_CSR_DIV_S 0x00000020
+#define FPU_CSR_OVF_S 0x00000010
+#define FPU_CSR_UDF_S 0x00000008
+#define FPU_CSR_INE_S 0x00000004
+
+/* rounding mode */
+#define FPU_CSR_RN 0x0 /* nearest */
+#define FPU_CSR_RZ 0x1 /* towards zero */
+#define FPU_CSR_RU 0x2 /* towards +Infinity */
+#define FPU_CSR_RD 0x3 /* towards -Infinity */
/*
* Values for PageMask register
*/
-#include <linux/config.h>
#ifdef CONFIG_CPU_VR41XX
-#define PM_1K 0x00000000
-#define PM_4K 0x00001800
-#define PM_16K 0x00007800
-#define PM_64K 0x0001f800
-#define PM_256K 0x0007f800
-#else
-#define PM_4K 0x00000000
-#define PM_16K 0x00006000
-#define PM_64K 0x0001e000
-#define PM_256K 0x0007e000
-#define PM_1M 0x001fe000
-#define PM_4M 0x007fe000
-#define PM_16M 0x01ffe000
-#endif
-/*
- * Values used for computation of new tlb entries
- */
-#define PL_4K 12
-#define PL_16K 14
-#define PL_64K 16
-#define PL_256K 18
-#define PL_1M 20
-#define PL_4M 22
-#define PL_16M 24
+/* Why doesn't stupidity hurt ... */
-/*
- * Macros to access the system control coprocessor
- */
-#define read_32bit_cp0_register(source) \
-({ int __res; \
- __asm__ __volatile__( \
- ".set\tpush\n\t" \
- ".set\treorder\n\t" \
- "mfc0\t%0,"STR(source)"\n\t" \
- ".set\tpop" \
- : "=r" (__res)); \
- __res;})
+#define PM_1K 0x00000000
+#define PM_4K 0x00001800
+#define PM_16K 0x00007800
+#define PM_64K 0x0001f800
+#define PM_256K 0x0007f800
-#define read_32bit_cp0_set1_register(source) \
-({ int __res; \
- __asm__ __volatile__( \
- ".set\tpush\n\t" \
- ".set\treorder\n\t" \
- "cfc0\t%0,"STR(source)"\n\t" \
- ".set\tpop" \
- : "=r" (__res)); \
- __res;})
+#else
-/*
- * For now use this only with interrupts disabled!
- */
-#define read_64bit_cp0_register(source) \
-({ int __res; \
- __asm__ __volatile__( \
- ".set\tmips3\n\t" \
- "dmfc0\t%0,"STR(source)"\n\t" \
- ".set\tmips0" \
- : "=r" (__res)); \
- __res;})
+#define PM_4K 0x00000000
+#define PM_16K 0x00006000
+#define PM_64K 0x0001e000
+#define PM_256K 0x0007e000
+#define PM_1M 0x001fe000
+#define PM_4M 0x007fe000
+#define PM_16M 0x01ffe000
+#define PM_64M 0x07ffe000
+#define PM_256M 0x1fffe000
-#define write_32bit_cp0_register(register,value) \
- __asm__ __volatile__( \
- "mtc0\t%0,"STR(register)"\n\t" \
- "nop" \
- : : "r" (value));
-
-#define write_32bit_cp0_set1_register(register,value) \
- __asm__ __volatile__( \
- "ctc0\t%0,"STR(register)"\n\t" \
- "nop" \
- : : "r" (value));
-
-#define write_64bit_cp0_register(register,value) \
- __asm__ __volatile__( \
- ".set\tmips3\n\t" \
- "dmtc0\t%0,"STR(register)"\n\t" \
- ".set\tmips0" \
- : : "r" (value))
-
-/*
- * This should be changed when we get a compiler that support the MIPS32 ISA.
- */
-#define read_mips32_cp0_config1() \
-({ int __res; \
- __asm__ __volatile__( \
- ".set\tnoreorder\n\t" \
- ".set\tnoat\n\t" \
- ".word\t0x40018001\n\t" \
- "move\t%0,$1\n\t" \
- ".set\tat\n\t" \
- ".set\treorder" \
- :"=r" (__res)); \
- __res;})
+#endif
-#define tlb_write_indexed() \
- __asm__ __volatile__( \
- ".set noreorder\n\t" \
- "tlbwi\n\t" \
-".set reorder")
+/*
+ * Values used for computation of new tlb entries
+ */
+#define PL_4K 12
+#define PL_16K 14
+#define PL_64K 16
+#define PL_256K 18
+#define PL_1M 20
+#define PL_4M 22
+#define PL_16M 24
+#define PL_64M 26
+#define PL_256M 28
/*
* R4x00 interrupt enable / cause bits
*/
-#define IE_SW0 (1<< 8)
-#define IE_SW1 (1<< 9)
-#define IE_IRQ0 (1<<10)
-#define IE_IRQ1 (1<<11)
-#define IE_IRQ2 (1<<12)
-#define IE_IRQ3 (1<<13)
-#define IE_IRQ4 (1<<14)
-#define IE_IRQ5 (1<<15)
+#define IE_SW0 (_ULCAST_(1) << 8)
+#define IE_SW1 (_ULCAST_(1) << 9)
+#define IE_IRQ0 (_ULCAST_(1) << 10)
+#define IE_IRQ1 (_ULCAST_(1) << 11)
+#define IE_IRQ2 (_ULCAST_(1) << 12)
+#define IE_IRQ3 (_ULCAST_(1) << 13)
+#define IE_IRQ4 (_ULCAST_(1) << 14)
+#define IE_IRQ5 (_ULCAST_(1) << 15)
/*
* R4x00 interrupt cause bits
*/
-#define C_SW0 (1<< 8)
-#define C_SW1 (1<< 9)
-#define C_IRQ0 (1<<10)
-#define C_IRQ1 (1<<11)
-#define C_IRQ2 (1<<12)
-#define C_IRQ3 (1<<13)
-#define C_IRQ4 (1<<14)
-#define C_IRQ5 (1<<15)
-
-#ifndef _LANGUAGE_ASSEMBLY
-/*
- * Manipulate the status register.
- * Mostly used to access the interrupt bits.
- */
-#define __BUILD_SET_CP0(name,register) \
-extern __inline__ unsigned int \
-set_cp0_##name(unsigned int set) \
-{ \
- unsigned int res; \
- \
- res = read_32bit_cp0_register(register); \
- res |= set; \
- write_32bit_cp0_register(register, res); \
- \
- return res; \
-} \
- \
-extern __inline__ unsigned int \
-clear_cp0_##name(unsigned int clear) \
-{ \
- unsigned int res; \
- \
- res = read_32bit_cp0_register(register); \
- res &= ~clear; \
- write_32bit_cp0_register(register, res); \
- \
- return res; \
-} \
- \
-extern __inline__ unsigned int \
-change_cp0_##name(unsigned int change, unsigned int new) \
-{ \
- unsigned int res; \
- \
- res = read_32bit_cp0_register(register); \
- res &= ~change; \
- res |= (new & change); \
- if(change) \
- write_32bit_cp0_register(register, res); \
- \
- return res; \
-}
-
-__BUILD_SET_CP0(status,CP0_STATUS)
-__BUILD_SET_CP0(cause,CP0_CAUSE)
-__BUILD_SET_CP0(config,CP0_CONFIG)
-
-#endif /* defined (_LANGUAGE_ASSEMBLY) */
+#define C_SW0 (_ULCAST_(1) << 8)
+#define C_SW1 (_ULCAST_(1) << 9)
+#define C_IRQ0 (_ULCAST_(1) << 10)
+#define C_IRQ1 (_ULCAST_(1) << 11)
+#define C_IRQ2 (_ULCAST_(1) << 12)
+#define C_IRQ3 (_ULCAST_(1) << 13)
+#define C_IRQ4 (_ULCAST_(1) << 14)
+#define C_IRQ5 (_ULCAST_(1) << 15)
/*
* Bitfields in the R4xx0 cp0 status register
#define ST0_DE 0x00010000
#define ST0_CE 0x00020000
+/*
+ * Setting c0_status.co enables Hit_Writeback and Hit_Writeback_Invalidate
+ * cacheops in userspace. This bit exists only on RM7000 and RM9000
+ * processors.
+ */
+#define ST0_CO 0x08000000
+
/*
* Bitfields in the R[23]000 cp0 status register.
*/
-#define ST0_IEC 0x00000001
+#define ST0_IEC 0x00000001
#define ST0_KUC 0x00000002
#define ST0_IEP 0x00000004
#define ST0_KUP 0x00000008
/*
* Bits specific to the R4640/R4650
*/
-#define ST0_UM (1 << 4)
-#define ST0_IL (1 << 23)
-#define ST0_DL (1 << 24)
+#define ST0_UM (_ULCAST_(1) << 4)
+#define ST0_IL (_ULCAST_(1) << 23)
+#define ST0_DL (_ULCAST_(1) << 24)
+
+/*
+ * Enable the MIPS MDMX and DSP ASEs
+ */
+#define ST0_MX 0x01000000
/*
* Bitfields in the TX39 family CP0 Configuration Register 3
*/
#define ST0_IM 0x0000ff00
#define STATUSB_IP0 8
-#define STATUSF_IP0 (1 << 8)
+#define STATUSF_IP0 (_ULCAST_(1) << 8)
#define STATUSB_IP1 9
-#define STATUSF_IP1 (1 << 9)
+#define STATUSF_IP1 (_ULCAST_(1) << 9)
#define STATUSB_IP2 10
-#define STATUSF_IP2 (1 << 10)
+#define STATUSF_IP2 (_ULCAST_(1) << 10)
#define STATUSB_IP3 11
-#define STATUSF_IP3 (1 << 11)
+#define STATUSF_IP3 (_ULCAST_(1) << 11)
#define STATUSB_IP4 12
-#define STATUSF_IP4 (1 << 12)
+#define STATUSF_IP4 (_ULCAST_(1) << 12)
#define STATUSB_IP5 13
-#define STATUSF_IP5 (1 << 13)
+#define STATUSF_IP5 (_ULCAST_(1) << 13)
#define STATUSB_IP6 14
-#define STATUSF_IP6 (1 << 14)
+#define STATUSF_IP6 (_ULCAST_(1) << 14)
#define STATUSB_IP7 15
-#define STATUSF_IP7 (1 << 15)
+#define STATUSF_IP7 (_ULCAST_(1) << 15)
#define STATUSB_IP8 0
-#define STATUSF_IP8 (1 << 0)
+#define STATUSF_IP8 (_ULCAST_(1) << 0)
#define STATUSB_IP9 1
-#define STATUSF_IP9 (1 << 1)
+#define STATUSF_IP9 (_ULCAST_(1) << 1)
#define STATUSB_IP10 2
-#define STATUSF_IP10 (1 << 2)
+#define STATUSF_IP10 (_ULCAST_(1) << 2)
#define STATUSB_IP11 3
-#define STATUSF_IP11 (1 << 3)
+#define STATUSF_IP11 (_ULCAST_(1) << 3)
#define STATUSB_IP12 4
-#define STATUSF_IP12 (1 << 4)
+#define STATUSF_IP12 (_ULCAST_(1) << 4)
#define STATUSB_IP13 5
-#define STATUSF_IP13 (1 << 5)
+#define STATUSF_IP13 (_ULCAST_(1) << 5)
#define STATUSB_IP14 6
-#define STATUSF_IP14 (1 << 6)
+#define STATUSF_IP14 (_ULCAST_(1) << 6)
#define STATUSB_IP15 7
-#define STATUSF_IP15 (1 << 7)
+#define STATUSF_IP15 (_ULCAST_(1) << 7)
#define ST0_CH 0x00040000
#define ST0_SR 0x00100000
+#define ST0_TS 0x00200000
#define ST0_BEV 0x00400000
#define ST0_RE 0x02000000
#define ST0_FR 0x04000000
* Refer to your MIPS R4xx0 manual, chapter 5 for explanation.
*/
#define CAUSEB_EXCCODE 2
-#define CAUSEF_EXCCODE (31 << 2)
+#define CAUSEF_EXCCODE (_ULCAST_(31) << 2)
#define CAUSEB_IP 8
-#define CAUSEF_IP (255 << 8)
+#define CAUSEF_IP (_ULCAST_(255) << 8)
#define CAUSEB_IP0 8
-#define CAUSEF_IP0 (1 << 8)
+#define CAUSEF_IP0 (_ULCAST_(1) << 8)
#define CAUSEB_IP1 9
-#define CAUSEF_IP1 (1 << 9)
+#define CAUSEF_IP1 (_ULCAST_(1) << 9)
#define CAUSEB_IP2 10
-#define CAUSEF_IP2 (1 << 10)
+#define CAUSEF_IP2 (_ULCAST_(1) << 10)
#define CAUSEB_IP3 11
-#define CAUSEF_IP3 (1 << 11)
+#define CAUSEF_IP3 (_ULCAST_(1) << 11)
#define CAUSEB_IP4 12
-#define CAUSEF_IP4 (1 << 12)
+#define CAUSEF_IP4 (_ULCAST_(1) << 12)
#define CAUSEB_IP5 13
-#define CAUSEF_IP5 (1 << 13)
+#define CAUSEF_IP5 (_ULCAST_(1) << 13)
#define CAUSEB_IP6 14
-#define CAUSEF_IP6 (1 << 14)
+#define CAUSEF_IP6 (_ULCAST_(1) << 14)
#define CAUSEB_IP7 15
-#define CAUSEF_IP7 (1 << 15)
+#define CAUSEF_IP7 (_ULCAST_(1) << 15)
#define CAUSEB_IV 23
-#define CAUSEF_IV (1 << 23)
+#define CAUSEF_IV (_ULCAST_(1) << 23)
#define CAUSEB_CE 28
-#define CAUSEF_CE (3 << 28)
+#define CAUSEF_CE (_ULCAST_(3) << 28)
#define CAUSEB_BD 31
-#define CAUSEF_BD (1 << 31)
+#define CAUSEF_BD (_ULCAST_(1) << 31)
/*
- * Bits in the coprozessor 0 config register.
+ * Bits in the coprocessor 0 config register.
*/
+/* Generic bits. */
#define CONF_CM_CACHABLE_NO_WA 0
#define CONF_CM_CACHABLE_WA 1
#define CONF_CM_UNCACHED 2
#define CONF_CM_CACHABLE_CUW 6
#define CONF_CM_CACHABLE_ACCELERATED 7
#define CONF_CM_CMASK 7
-#define CONF_DB (1 << 4)
-#define CONF_IB (1 << 5)
-#define CONF_SC (1 << 17)
-#define CONF_AC (1 << 23)
-#define CONF_HALT (1 << 25)
+#define CONF_BE (_ULCAST_(1) << 15)
+
+/* Bits common to various processors. */
+#define CONF_CU (_ULCAST_(1) << 3)
+#define CONF_DB (_ULCAST_(1) << 4)
+#define CONF_IB (_ULCAST_(1) << 5)
+#define CONF_DC (_ULCAST_(7) << 6)
+#define CONF_IC (_ULCAST_(7) << 9)
+#define CONF_EB (_ULCAST_(1) << 13)
+#define CONF_EM (_ULCAST_(1) << 14)
+#define CONF_SM (_ULCAST_(1) << 16)
+#define CONF_SC (_ULCAST_(1) << 17)
+#define CONF_EW (_ULCAST_(3) << 18)
+#define CONF_EP (_ULCAST_(15)<< 24)
+#define CONF_EC (_ULCAST_(7) << 28)
+#define CONF_CM (_ULCAST_(1) << 31)
+
+/* Bits specific to the R4xx0. */
+#define R4K_CONF_SW (_ULCAST_(1) << 20)
+#define R4K_CONF_SS (_ULCAST_(1) << 21)
+#define R4K_CONF_SB (_ULCAST_(3) << 22)
+
+/* Bits specific to the R5000. */
+#define R5K_CONF_SE (_ULCAST_(1) << 12)
+#define R5K_CONF_SS (_ULCAST_(3) << 20)
+
+/* Bits specific to the RM7000. */
+#define RM7K_CONF_SE (_ULCAST_(1) << 3)
+#define RM7K_CONF_TE (_ULCAST_(1) << 12)
+#define RM7K_CONF_CLK (_ULCAST_(1) << 16)
+#define RM7K_CONF_TC (_ULCAST_(1) << 17)
+#define RM7K_CONF_SI (_ULCAST_(3) << 20)
+#define RM7K_CONF_SC (_ULCAST_(1) << 31)
+
+/* Bits specific to the R10000. */
+#define R10K_CONF_DN (_ULCAST_(3) << 3)
+#define R10K_CONF_CT (_ULCAST_(1) << 5)
+#define R10K_CONF_PE (_ULCAST_(1) << 6)
+#define R10K_CONF_PM (_ULCAST_(3) << 7)
+#define R10K_CONF_EC (_ULCAST_(15)<< 9)
+#define R10K_CONF_SB (_ULCAST_(1) << 13)
+#define R10K_CONF_SK (_ULCAST_(1) << 14)
+#define R10K_CONF_SS (_ULCAST_(7) << 16)
+#define R10K_CONF_SC (_ULCAST_(7) << 19)
+#define R10K_CONF_DC (_ULCAST_(7) << 26)
+#define R10K_CONF_IC (_ULCAST_(7) << 29)
+
+/* Bits specific to the VR41xx. */
+#define VR41_CONF_CS (_ULCAST_(1) << 12)
+#define VR41_CONF_P4K (_ULCAST_(1) << 13)
+#define VR41_CONF_BP (_ULCAST_(1) << 16)
+#define VR41_CONF_M16 (_ULCAST_(1) << 20)
+#define VR41_CONF_AD (_ULCAST_(1) << 23)
+
+/* Bits specific to the R30xx. */
+#define R30XX_CONF_FDM (_ULCAST_(1) << 19)
+#define R30XX_CONF_REV (_ULCAST_(1) << 22)
+#define R30XX_CONF_AC (_ULCAST_(1) << 23)
+#define R30XX_CONF_RF (_ULCAST_(1) << 24)
+#define R30XX_CONF_HALT (_ULCAST_(1) << 25)
+#define R30XX_CONF_FPINT (_ULCAST_(7) << 26)
+#define R30XX_CONF_DBR (_ULCAST_(1) << 29)
+#define R30XX_CONF_SB (_ULCAST_(1) << 30)
+#define R30XX_CONF_LOCK (_ULCAST_(1) << 31)
+
+/* Bits specific to the TX49. */
+#define TX49_CONF_DC (_ULCAST_(1) << 16)
+#define TX49_CONF_IC (_ULCAST_(1) << 17) /* conflict with CONF_SC */
+#define TX49_CONF_HALT (_ULCAST_(1) << 18)
+#define TX49_CONF_CWFON (_ULCAST_(1) << 27)
+
+/* Bits specific to the MIPS32/64 PRA. */
+#define MIPS_CONF_MT (_ULCAST_(7) << 7)
+#define MIPS_CONF_AR (_ULCAST_(7) << 10)
+#define MIPS_CONF_AT (_ULCAST_(3) << 13)
+#define MIPS_CONF_M (_ULCAST_(1) << 31)
+
+/*
+ * Bits in the MIPS32/64 PRA coprocessor 0 config registers 1 and above.
+ */
+#define MIPS_CONF1_FP (_ULCAST_(1) << 0)
+#define MIPS_CONF1_EP (_ULCAST_(1) << 1)
+#define MIPS_CONF1_CA (_ULCAST_(1) << 2)
+#define MIPS_CONF1_WR (_ULCAST_(1) << 3)
+#define MIPS_CONF1_PC (_ULCAST_(1) << 4)
+#define MIPS_CONF1_MD (_ULCAST_(1) << 5)
+#define MIPS_CONF1_C2 (_ULCAST_(1) << 6)
+#define MIPS_CONF1_DA (_ULCAST_(7) << 7)
+#define MIPS_CONF1_DL (_ULCAST_(7) << 10)
+#define MIPS_CONF1_DS (_ULCAST_(7) << 13)
+#define MIPS_CONF1_IA (_ULCAST_(7) << 16)
+#define MIPS_CONF1_IL (_ULCAST_(7) << 19)
+#define MIPS_CONF1_IS (_ULCAST_(7) << 22)
+#define MIPS_CONF1_TLBS (_ULCAST_(63)<< 25)
+
+#define MIPS_CONF2_SA (_ULCAST_(15)<< 0)
+#define MIPS_CONF2_SL (_ULCAST_(15)<< 4)
+#define MIPS_CONF2_SS (_ULCAST_(15)<< 8)
+#define MIPS_CONF2_SU (_ULCAST_(15)<< 12)
+#define MIPS_CONF2_TA (_ULCAST_(15)<< 16)
+#define MIPS_CONF2_TL (_ULCAST_(15)<< 20)
+#define MIPS_CONF2_TS (_ULCAST_(15)<< 24)
+#define MIPS_CONF2_TU (_ULCAST_(7) << 28)
+
+#define MIPS_CONF3_TL (_ULCAST_(1) << 0)
+#define MIPS_CONF3_SM (_ULCAST_(1) << 1)
+#define MIPS_CONF3_MT (_ULCAST_(1) << 2)
+#define MIPS_CONF3_SP (_ULCAST_(1) << 4)
+#define MIPS_CONF3_VINT (_ULCAST_(1) << 5)
+#define MIPS_CONF3_VEIC (_ULCAST_(1) << 6)
+#define MIPS_CONF3_LPA (_ULCAST_(1) << 7)
+#define MIPS_CONF3_DSP (_ULCAST_(1) << 10)
+#define MIPS_CONF3_ULRI (_ULCAST_(1) << 13)
+
+#define MIPS_CONF7_WII (_ULCAST_(1) << 31)
+
+#define MIPS_CONF7_RPS (_ULCAST_(1) << 2)
+
+/*
+ * Bits in the MIPS32/64 coprocessor 1 (FPU) revision register.
+ */
+#define MIPS_FPIR_S (_ULCAST_(1) << 16)
+#define MIPS_FPIR_D (_ULCAST_(1) << 17)
+#define MIPS_FPIR_PS (_ULCAST_(1) << 18)
+#define MIPS_FPIR_3D (_ULCAST_(1) << 19)
+#define MIPS_FPIR_W (_ULCAST_(1) << 20)
+#define MIPS_FPIR_L (_ULCAST_(1) << 21)
+#define MIPS_FPIR_F64 (_ULCAST_(1) << 22)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Functions to access the R10000 performance counters. These are basically
+ * mfc0 and mtc0 instructions from and to coprocessor register with a 5-bit
+ * performance counter number encoded into bits 1 ... 5 of the instruction.
+ * Only performance counters 0 to 1 actually exist, so for a non-R10000 aware
+ * disassembler these will look like an access to sel 0 or 1.
+ */
+#define read_r10k_perf_cntr(counter) \
+({ \
+ unsigned int __res; \
+ __asm__ __volatile__( \
+ "mfpc\t%0, %1" \
+ : "=r" (__res) \
+ : "i" (counter)); \
+ \
+ __res; \
+})
+
+#define write_r10k_perf_cntr(counter,val) \
+do { \
+ __asm__ __volatile__( \
+ "mtpc\t%0, %1" \
+ : \
+ : "r" (val), "i" (counter)); \
+} while (0)
+
+#define read_r10k_perf_event(counter) \
+({ \
+ unsigned int __res; \
+ __asm__ __volatile__( \
+ "mfps\t%0, %1" \
+ : "=r" (__res) \
+ : "i" (counter)); \
+ \
+ __res; \
+})
+
+#define write_r10k_perf_cntl(counter,val) \
+do { \
+ __asm__ __volatile__( \
+ "mtps\t%0, %1" \
+ : \
+ : "r" (val), "i" (counter)); \
+} while (0)
+
+/*
+ * Macros to access the system control coprocessor
+ */
+
+#define __read_32bit_c0_register(source, sel) \
+({ int __res; \
+ if (sel == 0) \
+ __asm__ __volatile__( \
+ "mfc0\t%0, " #source "\n\t" \
+ : "=r" (__res)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips32\n\t" \
+ "mfc0\t%0, " #source ", " #sel "\n\t" \
+ ".set\tmips0\n\t" \
+ : "=r" (__res)); \
+ __res; \
+})
+
+#define __read_64bit_c0_register(source, sel) \
+({ unsigned long long __res; \
+ if (sizeof(unsigned long) == 4) \
+ __res = __read_64bit_c0_split(source, sel); \
+ else if (sel == 0) \
+ __asm__ __volatile__( \
+ ".set\tmips3\n\t" \
+ "dmfc0\t%0, " #source "\n\t" \
+ ".set\tmips0" \
+ : "=r" (__res)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dmfc0\t%0, " #source ", " #sel "\n\t" \
+ ".set\tmips0" \
+ : "=r" (__res)); \
+ __res; \
+})
+
+#define __write_32bit_c0_register(register, sel, value) \
+do { \
+ if (sel == 0) \
+ __asm__ __volatile__( \
+ "mtc0\t%z0, " #register "\n\t" \
+ : : "Jr" ((unsigned int)(value))); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips32\n\t" \
+ "mtc0\t%z0, " #register ", " #sel "\n\t" \
+ ".set\tmips0" \
+ : : "Jr" ((unsigned int)(value))); \
+} while (0)
+
+#define __write_64bit_c0_register(register, sel, value) \
+do { \
+ if (sizeof(unsigned long) == 4) \
+ __write_64bit_c0_split(register, sel, value); \
+ else if (sel == 0) \
+ __asm__ __volatile__( \
+ ".set\tmips3\n\t" \
+ "dmtc0\t%z0, " #register "\n\t" \
+ ".set\tmips0" \
+ : : "Jr" (value)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dmtc0\t%z0, " #register ", " #sel "\n\t" \
+ ".set\tmips0" \
+ : : "Jr" (value)); \
+} while (0)
+
+#define __read_ulong_c0_register(reg, sel) \
+ ((sizeof(unsigned long) == 4) ? \
+ (unsigned long) __read_32bit_c0_register(reg, sel) : \
+ (unsigned long) __read_64bit_c0_register(reg, sel))
+
+#define __write_ulong_c0_register(reg, sel, val) \
+do { \
+ if (sizeof(unsigned long) == 4) \
+ __write_32bit_c0_register(reg, sel, val); \
+ else \
+ __write_64bit_c0_register(reg, sel, val); \
+} while (0)
+
+/*
+ * On RM7000/RM9000 these are uses to access cop0 set 1 registers
+ */
+#define __read_32bit_c0_ctrl_register(source) \
+({ int __res; \
+ __asm__ __volatile__( \
+ "cfc0\t%0, " #source "\n\t" \
+ : "=r" (__res)); \
+ __res; \
+})
+
+#define __write_32bit_c0_ctrl_register(register, value) \
+do { \
+ __asm__ __volatile__( \
+ "ctc0\t%z0, " #register "\n\t" \
+ : : "Jr" ((unsigned int)(value))); \
+} while (0)
+
+/*
+ * These versions are only needed for systems with more than 38 bits of
+ * physical address space running the 32-bit kernel. That's none atm :-)
+ */
+#define __read_64bit_c0_split(source, sel) \
+({ \
+ unsigned long long __val; \
+ unsigned long __flags; \
+ \
+ local_irq_save(__flags); \
+ if (sel == 0) \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dmfc0\t%M0, " #source "\n\t" \
+ "dsll\t%L0, %M0, 32\n\t" \
+ "dsrl\t%M0, %M0, 32\n\t" \
+ "dsrl\t%L0, %L0, 32\n\t" \
+ ".set\tmips0" \
+ : "=r" (__val)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dmfc0\t%M0, " #source ", " #sel "\n\t" \
+ "dsll\t%L0, %M0, 32\n\t" \
+ "dsrl\t%M0, %M0, 32\n\t" \
+ "dsrl\t%L0, %L0, 32\n\t" \
+ ".set\tmips0" \
+ : "=r" (__val)); \
+ local_irq_restore(__flags); \
+ \
+ __val; \
+})
+
+#define __write_64bit_c0_split(source, sel, val) \
+do { \
+ unsigned long __flags; \
+ \
+ local_irq_save(__flags); \
+ if (sel == 0) \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dsll\t%L0, %L0, 32\n\t" \
+ "dsrl\t%L0, %L0, 32\n\t" \
+ "dsll\t%M0, %M0, 32\n\t" \
+ "or\t%L0, %L0, %M0\n\t" \
+ "dmtc0\t%L0, " #source "\n\t" \
+ ".set\tmips0" \
+ : : "r" (val)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dsll\t%L0, %L0, 32\n\t" \
+ "dsrl\t%L0, %L0, 32\n\t" \
+ "dsll\t%M0, %M0, 32\n\t" \
+ "or\t%L0, %L0, %M0\n\t" \
+ "dmtc0\t%L0, " #source ", " #sel "\n\t" \
+ ".set\tmips0" \
+ : : "r" (val)); \
+ local_irq_restore(__flags); \
+} while (0)
+
+#define read_c0_index() __read_32bit_c0_register($0, 0)
+#define write_c0_index(val) __write_32bit_c0_register($0, 0, val)
+
+#define read_c0_entrylo0() __read_ulong_c0_register($2, 0)
+#define write_c0_entrylo0(val) __write_ulong_c0_register($2, 0, val)
+
+#define read_c0_entrylo1() __read_ulong_c0_register($3, 0)
+#define write_c0_entrylo1(val) __write_ulong_c0_register($3, 0, val)
+
+#define read_c0_conf() __read_32bit_c0_register($3, 0)
+#define write_c0_conf(val) __write_32bit_c0_register($3, 0, val)
+
+#define read_c0_context() __read_ulong_c0_register($4, 0)
+#define write_c0_context(val) __write_ulong_c0_register($4, 0, val)
+
+#define read_c0_userlocal() __read_ulong_c0_register($4, 2)
+#define write_c0_userlocal(val) __write_ulong_c0_register($4, 2, val)
+
+#define read_c0_pagemask() __read_32bit_c0_register($5, 0)
+#define write_c0_pagemask(val) __write_32bit_c0_register($5, 0, val)
+
+#define read_c0_wired() __read_32bit_c0_register($6, 0)
+#define write_c0_wired(val) __write_32bit_c0_register($6, 0, val)
+
+#define read_c0_info() __read_32bit_c0_register($7, 0)
+
+#define read_c0_cache() __read_32bit_c0_register($7, 0) /* TX39xx */
+#define write_c0_cache(val) __write_32bit_c0_register($7, 0, val)
+
+#define read_c0_badvaddr() __read_ulong_c0_register($8, 0)
+#define write_c0_badvaddr(val) __write_ulong_c0_register($8, 0, val)
+
+#define read_c0_count() __read_32bit_c0_register($9, 0)
+#define write_c0_count(val) __write_32bit_c0_register($9, 0, val)
+
+#define read_c0_count2() __read_32bit_c0_register($9, 6) /* pnx8550 */
+#define write_c0_count2(val) __write_32bit_c0_register($9, 6, val)
+
+#define read_c0_count3() __read_32bit_c0_register($9, 7) /* pnx8550 */
+#define write_c0_count3(val) __write_32bit_c0_register($9, 7, val)
+
+#define read_c0_entryhi() __read_ulong_c0_register($10, 0)
+#define write_c0_entryhi(val) __write_ulong_c0_register($10, 0, val)
+
+#define read_c0_compare() __read_32bit_c0_register($11, 0)
+#define write_c0_compare(val) __write_32bit_c0_register($11, 0, val)
+
+#define read_c0_compare2() __read_32bit_c0_register($11, 6) /* pnx8550 */
+#define write_c0_compare2(val) __write_32bit_c0_register($11, 6, val)
+
+#define read_c0_compare3() __read_32bit_c0_register($11, 7) /* pnx8550 */
+#define write_c0_compare3(val) __write_32bit_c0_register($11, 7, val)
+
+#define read_c0_status() __read_32bit_c0_register($12, 0)
+#ifdef CONFIG_MIPS_MT_SMTC
+#define write_c0_status(val) \
+do { \
+ __write_32bit_c0_register($12, 0, val); \
+ __ehb(); \
+} while (0)
+#else
+/*
+ * Legacy non-SMTC code, which may be hazardous
+ * but which might not support EHB
+ */
+#define write_c0_status(val) __write_32bit_c0_register($12, 0, val)
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+#define read_c0_cause() __read_32bit_c0_register($13, 0)
+#define write_c0_cause(val) __write_32bit_c0_register($13, 0, val)
+
+#define read_c0_epc() __read_ulong_c0_register($14, 0)
+#define write_c0_epc(val) __write_ulong_c0_register($14, 0, val)
+
+#define read_c0_prid() __read_32bit_c0_register($15, 0)
+
+#define read_c0_config() __read_32bit_c0_register($16, 0)
+#define read_c0_config1() __read_32bit_c0_register($16, 1)
+#define read_c0_config2() __read_32bit_c0_register($16, 2)
+#define read_c0_config3() __read_32bit_c0_register($16, 3)
+#define read_c0_config4() __read_32bit_c0_register($16, 4)
+#define read_c0_config5() __read_32bit_c0_register($16, 5)
+#define read_c0_config6() __read_32bit_c0_register($16, 6)
+#define read_c0_config7() __read_32bit_c0_register($16, 7)
+#define write_c0_config(val) __write_32bit_c0_register($16, 0, val)
+#define write_c0_config1(val) __write_32bit_c0_register($16, 1, val)
+#define write_c0_config2(val) __write_32bit_c0_register($16, 2, val)
+#define write_c0_config3(val) __write_32bit_c0_register($16, 3, val)
+#define write_c0_config4(val) __write_32bit_c0_register($16, 4, val)
+#define write_c0_config5(val) __write_32bit_c0_register($16, 5, val)
+#define write_c0_config6(val) __write_32bit_c0_register($16, 6, val)
+#define write_c0_config7(val) __write_32bit_c0_register($16, 7, val)
+
+/*
+ * The WatchLo register. There may be upto 8 of them.
+ */
+#define read_c0_watchlo0() __read_ulong_c0_register($18, 0)
+#define read_c0_watchlo1() __read_ulong_c0_register($18, 1)
+#define read_c0_watchlo2() __read_ulong_c0_register($18, 2)
+#define read_c0_watchlo3() __read_ulong_c0_register($18, 3)
+#define read_c0_watchlo4() __read_ulong_c0_register($18, 4)
+#define read_c0_watchlo5() __read_ulong_c0_register($18, 5)
+#define read_c0_watchlo6() __read_ulong_c0_register($18, 6)
+#define read_c0_watchlo7() __read_ulong_c0_register($18, 7)
+#define write_c0_watchlo0(val) __write_ulong_c0_register($18, 0, val)
+#define write_c0_watchlo1(val) __write_ulong_c0_register($18, 1, val)
+#define write_c0_watchlo2(val) __write_ulong_c0_register($18, 2, val)
+#define write_c0_watchlo3(val) __write_ulong_c0_register($18, 3, val)
+#define write_c0_watchlo4(val) __write_ulong_c0_register($18, 4, val)
+#define write_c0_watchlo5(val) __write_ulong_c0_register($18, 5, val)
+#define write_c0_watchlo6(val) __write_ulong_c0_register($18, 6, val)
+#define write_c0_watchlo7(val) __write_ulong_c0_register($18, 7, val)
+
+/*
+ * The WatchHi register. There may be upto 8 of them.
+ */
+#define read_c0_watchhi0() __read_32bit_c0_register($19, 0)
+#define read_c0_watchhi1() __read_32bit_c0_register($19, 1)
+#define read_c0_watchhi2() __read_32bit_c0_register($19, 2)
+#define read_c0_watchhi3() __read_32bit_c0_register($19, 3)
+#define read_c0_watchhi4() __read_32bit_c0_register($19, 4)
+#define read_c0_watchhi5() __read_32bit_c0_register($19, 5)
+#define read_c0_watchhi6() __read_32bit_c0_register($19, 6)
+#define read_c0_watchhi7() __read_32bit_c0_register($19, 7)
+
+#define write_c0_watchhi0(val) __write_32bit_c0_register($19, 0, val)
+#define write_c0_watchhi1(val) __write_32bit_c0_register($19, 1, val)
+#define write_c0_watchhi2(val) __write_32bit_c0_register($19, 2, val)
+#define write_c0_watchhi3(val) __write_32bit_c0_register($19, 3, val)
+#define write_c0_watchhi4(val) __write_32bit_c0_register($19, 4, val)
+#define write_c0_watchhi5(val) __write_32bit_c0_register($19, 5, val)
+#define write_c0_watchhi6(val) __write_32bit_c0_register($19, 6, val)
+#define write_c0_watchhi7(val) __write_32bit_c0_register($19, 7, val)
+
+#define read_c0_xcontext() __read_ulong_c0_register($20, 0)
+#define write_c0_xcontext(val) __write_ulong_c0_register($20, 0, val)
+
+#define read_c0_intcontrol() __read_32bit_c0_ctrl_register($20)
+#define write_c0_intcontrol(val) __write_32bit_c0_ctrl_register($20, val)
+
+#define read_c0_framemask() __read_32bit_c0_register($21, 0)
+#define write_c0_framemask(val) __write_32bit_c0_register($21, 0, val)
+
+/* RM9000 PerfControl performance counter control register */
+#define read_c0_perfcontrol() __read_32bit_c0_register($22, 0)
+#define write_c0_perfcontrol(val) __write_32bit_c0_register($22, 0, val)
+
+#define read_c0_diag() __read_32bit_c0_register($22, 0)
+#define write_c0_diag(val) __write_32bit_c0_register($22, 0, val)
+
+#define read_c0_diag1() __read_32bit_c0_register($22, 1)
+#define write_c0_diag1(val) __write_32bit_c0_register($22, 1, val)
+
+#define read_c0_diag2() __read_32bit_c0_register($22, 2)
+#define write_c0_diag2(val) __write_32bit_c0_register($22, 2, val)
+
+#define read_c0_diag3() __read_32bit_c0_register($22, 3)
+#define write_c0_diag3(val) __write_32bit_c0_register($22, 3, val)
+
+#define read_c0_diag4() __read_32bit_c0_register($22, 4)
+#define write_c0_diag4(val) __write_32bit_c0_register($22, 4, val)
+
+#define read_c0_diag5() __read_32bit_c0_register($22, 5)
+#define write_c0_diag5(val) __write_32bit_c0_register($22, 5, val)
+
+#define read_c0_debug() __read_32bit_c0_register($23, 0)
+#define write_c0_debug(val) __write_32bit_c0_register($23, 0, val)
+
+#define read_c0_depc() __read_ulong_c0_register($24, 0)
+#define write_c0_depc(val) __write_ulong_c0_register($24, 0, val)
+
+/*
+ * MIPS32 / MIPS64 performance counters
+ */
+#define read_c0_perfctrl0() __read_32bit_c0_register($25, 0)
+#define write_c0_perfctrl0(val) __write_32bit_c0_register($25, 0, val)
+#define read_c0_perfcntr0() __read_32bit_c0_register($25, 1)
+#define write_c0_perfcntr0(val) __write_32bit_c0_register($25, 1, val)
+#define read_c0_perfctrl1() __read_32bit_c0_register($25, 2)
+#define write_c0_perfctrl1(val) __write_32bit_c0_register($25, 2, val)
+#define read_c0_perfcntr1() __read_32bit_c0_register($25, 3)
+#define write_c0_perfcntr1(val) __write_32bit_c0_register($25, 3, val)
+#define read_c0_perfctrl2() __read_32bit_c0_register($25, 4)
+#define write_c0_perfctrl2(val) __write_32bit_c0_register($25, 4, val)
+#define read_c0_perfcntr2() __read_32bit_c0_register($25, 5)
+#define write_c0_perfcntr2(val) __write_32bit_c0_register($25, 5, val)
+#define read_c0_perfctrl3() __read_32bit_c0_register($25, 6)
+#define write_c0_perfctrl3(val) __write_32bit_c0_register($25, 6, val)
+#define read_c0_perfcntr3() __read_32bit_c0_register($25, 7)
+#define write_c0_perfcntr3(val) __write_32bit_c0_register($25, 7, val)
+
+/* RM9000 PerfCount performance counter register */
+#define read_c0_perfcount() __read_64bit_c0_register($25, 0)
+#define write_c0_perfcount(val) __write_64bit_c0_register($25, 0, val)
+
+#define read_c0_ecc() __read_32bit_c0_register($26, 0)
+#define write_c0_ecc(val) __write_32bit_c0_register($26, 0, val)
+
+#define read_c0_derraddr0() __read_ulong_c0_register($26, 1)
+#define write_c0_derraddr0(val) __write_ulong_c0_register($26, 1, val)
+
+#define read_c0_cacheerr() __read_32bit_c0_register($27, 0)
+
+#define read_c0_derraddr1() __read_ulong_c0_register($27, 1)
+#define write_c0_derraddr1(val) __write_ulong_c0_register($27, 1, val)
+
+#define read_c0_taglo() __read_32bit_c0_register($28, 0)
+#define write_c0_taglo(val) __write_32bit_c0_register($28, 0, val)
+
+#define read_c0_dtaglo() __read_32bit_c0_register($28, 2)
+#define write_c0_dtaglo(val) __write_32bit_c0_register($28, 2, val)
+
+#define read_c0_taghi() __read_32bit_c0_register($29, 0)
+#define write_c0_taghi(val) __write_32bit_c0_register($29, 0, val)
+
+#define read_c0_errorepc() __read_ulong_c0_register($30, 0)
+#define write_c0_errorepc(val) __write_ulong_c0_register($30, 0, val)
+
+/* MIPSR2 */
+#define read_c0_hwrena() __read_32bit_c0_register($7, 0)
+#define write_c0_hwrena(val) __write_32bit_c0_register($7, 0, val)
+
+#define read_c0_intctl() __read_32bit_c0_register($12, 1)
+#define write_c0_intctl(val) __write_32bit_c0_register($12, 1, val)
+
+#define read_c0_srsctl() __read_32bit_c0_register($12, 2)
+#define write_c0_srsctl(val) __write_32bit_c0_register($12, 2, val)
+
+#define read_c0_srsmap() __read_32bit_c0_register($12, 3)
+#define write_c0_srsmap(val) __write_32bit_c0_register($12, 3, val)
+
+#define read_c0_ebase() __read_32bit_c0_register($15, 1)
+#define write_c0_ebase(val) __write_32bit_c0_register($15, 1, val)
/*
- * R10000 performance counter definitions.
+ * Macros to access the floating point coprocessor control registers
+ */
+#define read_32bit_cp1_register(source) \
+({ int __res; \
+ __asm__ __volatile__( \
+ ".set\tpush\n\t" \
+ ".set\treorder\n\t" \
+ "cfc1\t%0,"STR(source)"\n\t" \
+ ".set\tpop" \
+ : "=r" (__res)); \
+ __res;})
+
+#define rddsp(mask) \
+({ \
+ unsigned int __res; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # rddsp $1, %x1 \n" \
+ " .word 0x7c000cb8 | (%x1 << 16) \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__res) \
+ : "i" (mask)); \
+ __res; \
+})
+
+#define wrdsp(val, mask) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # wrdsp $1, %x1 \n" \
+ " .word 0x7c2004f8 | (%x1 << 11) \n" \
+ " .set pop \n" \
+ : \
+ : "r" (val), "i" (mask)); \
+} while (0)
+
+#define mfhi0() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac0 \n" \
+ " .word 0x00000810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mfhi1() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac1 \n" \
+ " .word 0x00200810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mfhi2() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac2 \n" \
+ " .word 0x00400810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mfhi3() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac3 \n" \
+ " .word 0x00600810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo0() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac0 \n" \
+ " .word 0x00000812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo1() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac1 \n" \
+ " .word 0x00200812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo2() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac2 \n" \
+ " .word 0x00400812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo3() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac3 \n" \
+ " .word 0x00600812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mthi0(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac0 \n" \
+ " .word 0x00200011 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mthi1(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac1 \n" \
+ " .word 0x00200811 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mthi2(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac2 \n" \
+ " .word 0x00201011 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mthi3(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac3 \n" \
+ " .word 0x00201811 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo0(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac0 \n" \
+ " .word 0x00200013 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo1(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac1 \n" \
+ " .word 0x00200813 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo2(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac2 \n" \
+ " .word 0x00201013 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo3(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac3 \n" \
+ " .word 0x00201813 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+/*
+ * TLB operations.
*
- * FIXME: The R10000 performance counter opens a nice way to implement CPU
- * time accounting with a precission of one cycle. I don't have
- * R10000 silicon but just a manual, so ...
- */
-
-/*
- * Events counted by counter #0
- */
-#define CE0_CYCLES 0
-#define CE0_INSN_ISSUED 1
-#define CE0_LPSC_ISSUED 2
-#define CE0_S_ISSUED 3
-#define CE0_SC_ISSUED 4
-#define CE0_SC_FAILED 5
-#define CE0_BRANCH_DECODED 6
-#define CE0_QW_WB_SECONDARY 7
-#define CE0_CORRECTED_ECC_ERRORS 8
-#define CE0_ICACHE_MISSES 9
-#define CE0_SCACHE_I_MISSES 10
-#define CE0_SCACHE_I_WAY_MISSPREDICTED 11
-#define CE0_EXT_INTERVENTIONS_REQ 12
-#define CE0_EXT_INVALIDATE_REQ 13
-#define CE0_VIRTUAL_COHERENCY_COND 14
-#define CE0_INSN_GRADUATED 15
-
-/*
- * Events counted by counter #1
- */
-#define CE1_CYCLES 0
-#define CE1_INSN_GRADUATED 1
-#define CE1_LPSC_GRADUATED 2
-#define CE1_S_GRADUATED 3
-#define CE1_SC_GRADUATED 4
-#define CE1_FP_INSN_GRADUATED 5
-#define CE1_QW_WB_PRIMARY 6
-#define CE1_TLB_REFILL 7
-#define CE1_BRANCH_MISSPREDICTED 8
-#define CE1_DCACHE_MISS 9
-#define CE1_SCACHE_D_MISSES 10
-#define CE1_SCACHE_D_WAY_MISSPREDICTED 11
-#define CE1_EXT_INTERVENTION_HITS 12
-#define CE1_EXT_INVALIDATE_REQ 13
-#define CE1_SP_HINT_TO_CEXCL_SC_BLOCKS 14
-#define CE1_SP_HINT_TO_SHARED_SC_BLOCKS 15
-
-/*
- * These flags define in which priviledge mode the counters count events
- */
-#define CEB_USER 8 /* Count events in user mode, EXL = ERL = 0 */
-#define CEB_SUPERVISOR 4 /* Count events in supvervisor mode EXL = ERL = 0 */
-#define CEB_KERNEL 2 /* Count events in kernel mode EXL = ERL = 0 */
-#define CEB_EXL 1 /* Count events with EXL = 1, ERL = 0 */
+ * It is responsibility of the caller to take care of any TLB hazards.
+ */
+static inline void tlb_probe(void)
+{
+ __asm__ __volatile__(
+ ".set noreorder\n\t"
+ "tlbp\n\t"
+ ".set reorder");
+}
+
+static inline void tlb_read(void)
+{
+#if MIPS34K_MISSED_ITLB_WAR
+ int res = 0;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+ " .set mips32r2 \n"
+ " .word 0x41610001 # dvpe $1 \n"
+ " move %0, $1 \n"
+ " ehb \n"
+ " .set pop \n"
+ : "=r" (res));
+
+ instruction_hazard();
+#endif
+
+ __asm__ __volatile__(
+ ".set noreorder\n\t"
+ "tlbr\n\t"
+ ".set reorder");
+
+#if MIPS34K_MISSED_ITLB_WAR
+ if ((res & _ULCAST_(1)))
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+ " .set mips32r2 \n"
+ " .word 0x41600021 # evpe \n"
+ " ehb \n"
+ " .set pop \n");
+#endif
+}
+
+static inline void tlb_write_indexed(void)
+{
+ __asm__ __volatile__(
+ ".set noreorder\n\t"
+ "tlbwi\n\t"
+ ".set reorder");
+}
+
+static inline void tlb_write_random(void)
+{
+ __asm__ __volatile__(
+ ".set noreorder\n\t"
+ "tlbwr\n\t"
+ ".set reorder");
+}
+
+/*
+ * Manipulate bits in a c0 register.
+ */
+#define __BUILD_SET_C0(name) \
+static inline unsigned int \
+set_c0_##name(unsigned int set) \
+{ \
+ unsigned int res; \
+ \
+ res = read_c0_##name(); \
+ res |= set; \
+ write_c0_##name(res); \
+ \
+ return res; \
+} \
+ \
+static inline unsigned int \
+clear_c0_##name(unsigned int clear) \
+{ \
+ unsigned int res; \
+ \
+ res = read_c0_##name(); \
+ res &= ~clear; \
+ write_c0_##name(res); \
+ \
+ return res; \
+} \
+ \
+static inline unsigned int \
+change_c0_##name(unsigned int change, unsigned int new) \
+{ \
+ unsigned int res; \
+ \
+ res = read_c0_##name(); \
+ res &= ~change; \
+ res |= (new & change); \
+ write_c0_##name(res); \
+ \
+ return res; \
+}
+
+__BUILD_SET_C0(status)
+__BUILD_SET_C0(cause)
+__BUILD_SET_C0(config)
+__BUILD_SET_C0(intcontrol)
+__BUILD_SET_C0(intctl)
+__BUILD_SET_C0(srsmap)
+
+#endif /* !__ASSEMBLY__ */
#endif /* _ASM_MIPSREGS_H */
#define ext2_find_first_zero_bit(addr, size) \
ext2_find_next_zero_bit((addr), (size), 0)
-extern __inline__ unsigned long ext2_find_next_zero_bit(void *addr,
+static __inline__ unsigned long ext2_find_next_zero_bit(void *addr,
unsigned long size, unsigned long offset)
{
unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
#define SET_LAW_ENTRY(idx, a, sz, trgt) \
{ .index = idx, .addr = a, .size = sz, .trgt_id = trgt }
+#define SET_LAW(a, sz, trgt) \
+ { .index = -1, .addr = a, .size = sz, .trgt_id = trgt }
+
enum law_size {
LAW_SIZE_4K = 0xb,
LAW_SIZE_8K,
};
extern void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id);
+extern int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id);
+extern int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id);
extern void disable_law(u8 idx);
extern void init_laws(void);
extern void print_laws(void);
--- /dev/null
+/*
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __ASM_PPC_FSL_LBC_H
+#define __ASM_PPC_FSL_LBC_H
+
+#include <config.h>
+
+/* BR - Base Registers
+ */
+#define BR0 0x5000 /* Register offset to immr */
+#define BR1 0x5008
+#define BR2 0x5010
+#define BR3 0x5018
+#define BR4 0x5020
+#define BR5 0x5028
+#define BR6 0x5030
+#define BR7 0x5038
+
+#define BR_BA 0xFFFF8000
+#define BR_BA_SHIFT 15
+#define BR_PS 0x00001800
+#define BR_PS_SHIFT 11
+#define BR_PS_8 0x00000800 /* Port Size 8 bit */
+#define BR_PS_16 0x00001000 /* Port Size 16 bit */
+#define BR_PS_32 0x00001800 /* Port Size 32 bit */
+#define BR_DECC 0x00000600
+#define BR_DECC_SHIFT 9
+#define BR_DECC_OFF 0x00000000
+#define BR_DECC_CHK 0x00000200
+#define BR_DECC_CHK_GEN 0x00000400
+#define BR_WP 0x00000100
+#define BR_WP_SHIFT 8
+#define BR_MSEL 0x000000E0
+#define BR_MSEL_SHIFT 5
+#define BR_MS_GPCM 0x00000000 /* GPCM */
+#define BR_MS_FCM 0x00000020 /* FCM */
+#ifdef CONFIG_MPC83xx
+#define BR_MS_SDRAM 0x00000060 /* SDRAM */
+#elif defined(CONFIG_MPC85xx)
+#define BR_MS_SDRAM 0x00000000 /* SDRAM */
+#endif
+#define BR_MS_UPMA 0x00000080 /* UPMA */
+#define BR_MS_UPMB 0x000000A0 /* UPMB */
+#define BR_MS_UPMC 0x000000C0 /* UPMC */
+#if !defined(CONFIG_MPC834X)
+#define BR_ATOM 0x0000000C
+#define BR_ATOM_SHIFT 2
+#endif
+#define BR_V 0x00000001
+#define BR_V_SHIFT 0
+
+#define UPMA 0
+#define UPMB 1
+#define UPMC 2
+
+#if defined(CONFIG_MPC834X)
+#define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_V)
+#else
+#define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_ATOM | BR_V)
+#endif
+
+/* OR - Option Registers
+ */
+#define OR0 0x5004 /* Register offset to immr */
+#define OR1 0x500C
+#define OR2 0x5014
+#define OR3 0x501C
+#define OR4 0x5024
+#define OR5 0x502C
+#define OR6 0x5034
+#define OR7 0x503C
+
+#define OR_GPCM_AM 0xFFFF8000
+#define OR_GPCM_AM_SHIFT 15
+#define OR_GPCM_BCTLD 0x00001000
+#define OR_GPCM_BCTLD_SHIFT 12
+#define OR_GPCM_CSNT 0x00000800
+#define OR_GPCM_CSNT_SHIFT 11
+#define OR_GPCM_ACS 0x00000600
+#define OR_GPCM_ACS_SHIFT 9
+#define OR_GPCM_ACS_DIV2 0x00000600
+#define OR_GPCM_ACS_DIV4 0x00000400
+#define OR_GPCM_XACS 0x00000100
+#define OR_GPCM_XACS_SHIFT 8
+#define OR_GPCM_SCY 0x000000F0
+#define OR_GPCM_SCY_SHIFT 4
+#define OR_GPCM_SCY_1 0x00000010
+#define OR_GPCM_SCY_2 0x00000020
+#define OR_GPCM_SCY_3 0x00000030
+#define OR_GPCM_SCY_4 0x00000040
+#define OR_GPCM_SCY_5 0x00000050
+#define OR_GPCM_SCY_6 0x00000060
+#define OR_GPCM_SCY_7 0x00000070
+#define OR_GPCM_SCY_8 0x00000080
+#define OR_GPCM_SCY_9 0x00000090
+#define OR_GPCM_SCY_10 0x000000a0
+#define OR_GPCM_SCY_11 0x000000b0
+#define OR_GPCM_SCY_12 0x000000c0
+#define OR_GPCM_SCY_13 0x000000d0
+#define OR_GPCM_SCY_14 0x000000e0
+#define OR_GPCM_SCY_15 0x000000f0
+#define OR_GPCM_SETA 0x00000008
+#define OR_GPCM_SETA_SHIFT 3
+#define OR_GPCM_TRLX 0x00000004
+#define OR_GPCM_TRLX_SHIFT 2
+#define OR_GPCM_EHTR 0x00000002
+#define OR_GPCM_EHTR_SHIFT 1
+#define OR_GPCM_EAD 0x00000001
+#define OR_GPCM_EAD_SHIFT 0
+
+/* helpers to convert values into an OR address mask (GPCM mode) */
+#define P2SZ_TO_AM(s) ((~((s) - 1)) & 0xffff8000) /* must be pow of 2 */
+#define MEG_TO_AM(m) P2SZ_TO_AM((m) << 20)
+
+#define OR_FCM_AM 0xFFFF8000
+#define OR_FCM_AM_SHIFT 15
+#define OR_FCM_BCTLD 0x00001000
+#define OR_FCM_BCTLD_SHIFT 12
+#define OR_FCM_PGS 0x00000400
+#define OR_FCM_PGS_SHIFT 10
+#define OR_FCM_CSCT 0x00000200
+#define OR_FCM_CSCT_SHIFT 9
+#define OR_FCM_CST 0x00000100
+#define OR_FCM_CST_SHIFT 8
+#define OR_FCM_CHT 0x00000080
+#define OR_FCM_CHT_SHIFT 7
+#define OR_FCM_SCY 0x00000070
+#define OR_FCM_SCY_SHIFT 4
+#define OR_FCM_SCY_1 0x00000010
+#define OR_FCM_SCY_2 0x00000020
+#define OR_FCM_SCY_3 0x00000030
+#define OR_FCM_SCY_4 0x00000040
+#define OR_FCM_SCY_5 0x00000050
+#define OR_FCM_SCY_6 0x00000060
+#define OR_FCM_SCY_7 0x00000070
+#define OR_FCM_RST 0x00000008
+#define OR_FCM_RST_SHIFT 3
+#define OR_FCM_TRLX 0x00000004
+#define OR_FCM_TRLX_SHIFT 2
+#define OR_FCM_EHTR 0x00000002
+#define OR_FCM_EHTR_SHIFT 1
+
+#define OR_UPM_AM 0xFFFF8000
+#define OR_UPM_AM_SHIFT 15
+#define OR_UPM_XAM 0x00006000
+#define OR_UPM_XAM_SHIFT 13
+#define OR_UPM_BCTLD 0x00001000
+#define OR_UPM_BCTLD_SHIFT 12
+#define OR_UPM_BI 0x00000100
+#define OR_UPM_BI_SHIFT 8
+#define OR_UPM_TRLX 0x00000004
+#define OR_UPM_TRLX_SHIFT 2
+#define OR_UPM_EHTR 0x00000002
+#define OR_UPM_EHTR_SHIFT 1
+#define OR_UPM_EAD 0x00000001
+#define OR_UPM_EAD_SHIFT 0
+
+#define OR_SDRAM_AM 0xFFFF8000
+#define OR_SDRAM_AM_SHIFT 15
+#define OR_SDRAM_XAM 0x00006000
+#define OR_SDRAM_XAM_SHIFT 13
+#define OR_SDRAM_COLS 0x00001C00
+#define OR_SDRAM_COLS_SHIFT 10
+#define OR_SDRAM_ROWS 0x000001C0
+#define OR_SDRAM_ROWS_SHIFT 6
+#define OR_SDRAM_PMSEL 0x00000020
+#define OR_SDRAM_PMSEL_SHIFT 5
+#define OR_SDRAM_EAD 0x00000001
+#define OR_SDRAM_EAD_SHIFT 0
+
+#define OR_AM_32KB 0xFFFF8000
+#define OR_AM_64KB 0xFFFF0000
+#define OR_AM_128KB 0xFFFE0000
+#define OR_AM_256KB 0xFFFC0000
+#define OR_AM_512KB 0xFFF80000
+#define OR_AM_1MB 0xFFF00000
+#define OR_AM_2MB 0xFFE00000
+#define OR_AM_4MB 0xFFC00000
+#define OR_AM_8MB 0xFF800000
+#define OR_AM_16MB 0xFF000000
+#define OR_AM_32MB 0xFE000000
+#define OR_AM_64MB 0xFC000000
+#define OR_AM_128MB 0xF8000000
+#define OR_AM_256MB 0xF0000000
+#define OR_AM_512MB 0xE0000000
+#define OR_AM_1GB 0xC0000000
+#define OR_AM_2GB 0x80000000
+#define OR_AM_4GB 0x00000000
+
+/* MxMR - UPM Machine A/B/C Mode Registers
+ */
+#define MxMR_MAD_MSK 0x0000003f /* Machine Address Mask */
+#define MxMR_TLFx_MSK 0x000003c0 /* Refresh Loop Field Mask */
+#define MxMR_WLFx_MSK 0x00003c00 /* Write Loop Field Mask */
+#define MxMR_WLFx_1X 0x00000400 /* executed 1 time */
+#define MxMR_WLFx_2X 0x00000800 /* executed 2 times */
+#define MxMR_WLFx_3X 0x00000c00 /* executed 3 times */
+#define MxMR_WLFx_4X 0x00001000 /* executed 4 times */
+#define MxMR_WLFx_5X 0x00001400 /* executed 5 times */
+#define MxMR_WLFx_6X 0x00001800 /* executed 6 times */
+#define MxMR_WLFx_7X 0x00001c00 /* executed 7 times */
+#define MxMR_WLFx_8X 0x00002000 /* executed 8 times */
+#define MxMR_WLFx_9X 0x00002400 /* executed 9 times */
+#define MxMR_WLFx_10X 0x00002800 /* executed 10 times */
+#define MxMR_WLFx_11X 0x00002c00 /* executed 11 times */
+#define MxMR_WLFx_12X 0x00003000 /* executed 12 times */
+#define MxMR_WLFx_13X 0x00003400 /* executed 13 times */
+#define MxMR_WLFx_14X 0x00003800 /* executed 14 times */
+#define MxMR_WLFx_15X 0x00003c00 /* executed 15 times */
+#define MxMR_WLFx_16X 0x00000000 /* executed 16 times */
+#define MxMR_RLFx_MSK 0x0003c000 /* Read Loop Field Mask */
+#define MxMR_GPL_x4DIS 0x00040000 /* GPL_A4 Ouput Line Disable */
+#define MxMR_G0CLx_MSK 0x00380000 /* General Line 0 Control Mask */
+#define MxMR_DSx_1_CYCL 0x00000000 /* 1 cycle Disable Period */
+#define MxMR_DSx_2_CYCL 0x00400000 /* 2 cycle Disable Period */
+#define MxMR_DSx_3_CYCL 0x00800000 /* 3 cycle Disable Period */
+#define MxMR_DSx_4_CYCL 0x00c00000 /* 4 cycle Disable Period */
+#define MxMR_DSx_MSK 0x00c00000 /* Disable Timer Period Mask */
+#define MxMR_AMx_MSK 0x07000000 /* Addess Multiplex Size Mask */
+#define MxMR_OP_NORM 0x00000000 /* Normal Operation */
+#define MxMR_OP_WARR 0x10000000 /* Write to Array */
+#define MxMR_OP_RARR 0x20000000 /* Read from Array */
+#define MxMR_OP_RUNP 0x30000000 /* Run Pattern */
+#define MxMR_OP_MSK 0x30000000 /* Command Opcode Mask */
+#define MxMR_RFEN 0x40000000 /* Refresh Enable */
+#define MxMR_BSEL 0x80000000 /* Bus Select */
+
+#define LBLAWAR_EN 0x80000000
+#define LBLAWAR_4KB 0x0000000B
+#define LBLAWAR_8KB 0x0000000C
+#define LBLAWAR_16KB 0x0000000D
+#define LBLAWAR_32KB 0x0000000E
+#define LBLAWAR_64KB 0x0000000F
+#define LBLAWAR_128KB 0x00000010
+#define LBLAWAR_256KB 0x00000011
+#define LBLAWAR_512KB 0x00000012
+#define LBLAWAR_1MB 0x00000013
+#define LBLAWAR_2MB 0x00000014
+#define LBLAWAR_4MB 0x00000015
+#define LBLAWAR_8MB 0x00000016
+#define LBLAWAR_16MB 0x00000017
+#define LBLAWAR_32MB 0x00000018
+#define LBLAWAR_64MB 0x00000019
+#define LBLAWAR_128MB 0x0000001A
+#define LBLAWAR_256MB 0x0000001B
+#define LBLAWAR_512MB 0x0000001C
+#define LBLAWAR_1GB 0x0000001D
+#define LBLAWAR_2GB 0x0000001E
+
+/* LBCR - Local Bus Configuration Register
+ */
+#define LBCR_LDIS 0x80000000
+#define LBCR_LDIS_SHIFT 31
+#define LBCR_BCTLC 0x00C00000
+#define LBCR_BCTLC_SHIFT 22
+#define LBCR_LPBSE 0x00020000
+#define LBCR_LPBSE_SHIFT 17
+#define LBCR_EPAR 0x00010000
+#define LBCR_EPAR_SHIFT 16
+#define LBCR_BMT 0x0000FF00
+#define LBCR_BMT_SHIFT 8
+
+/* LCRR - Clock Ratio Register
+ */
+#define LCRR_DBYP 0x80000000
+#define LCRR_DBYP_SHIFT 31
+#define LCRR_BUFCMDC 0x30000000
+#define LCRR_BUFCMDC_SHIFT 28
+#define LCRR_BUFCMDC_1 0x10000000
+#define LCRR_BUFCMDC_2 0x20000000
+#define LCRR_BUFCMDC_3 0x30000000
+#define LCRR_BUFCMDC_4 0x00000000
+#define LCRR_ECL 0x03000000
+#define LCRR_ECL_SHIFT 24
+#define LCRR_ECL_4 0x00000000
+#define LCRR_ECL_5 0x01000000
+#define LCRR_ECL_6 0x02000000
+#define LCRR_ECL_7 0x03000000
+#define LCRR_EADC 0x00030000
+#define LCRR_EADC_SHIFT 16
+#define LCRR_EADC_1 0x00010000
+#define LCRR_EADC_2 0x00020000
+#define LCRR_EADC_3 0x00030000
+#define LCRR_EADC_4 0x00000000
+#define LCRR_CLKDIV 0x0000000F
+#define LCRR_CLKDIV_SHIFT 0
+#define LCRR_CLKDIV_2 0x00000002
+#define LCRR_CLKDIV_4 0x00000004
+#define LCRR_CLKDIV_8 0x00000008
+
+#endif /* __ASM_PPC_FSL_LBC_H */
uint mp_alloc_base;
uint mp_alloc_top;
#endif /* CONFIG_QE */
+#if defined(CONFIG_FSL_LAW)
+ u32 used_laws;
+#endif
#if defined(CONFIG_MPC5xxx)
unsigned long ipb_clk;
unsigned long pci_clk;
__asm__ __volatile__("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
}
+/* Clear and set bits in one shot. These macros can be used to clear and
+ * set multiple bits in a register using a single call. These macros can
+ * also be used to set a multiple-bit bit pattern using a mask, by
+ * specifying the mask in the 'clear' parameter and the new bit pattern
+ * in the 'set' parameter.
+ */
+
+#define clrbits(type, addr, clear) \
+ out_##type((addr), in_##type(addr) & ~(clear))
+
+#define setbits(type, addr, set) \
+ out_##type((addr), in_##type(addr) | (set))
+
+#define clrsetbits(type, addr, clear, set) \
+ out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
+
+#define clrbits_be32(addr, clear) clrbits(be32, addr, clear)
+#define setbits_be32(addr, set) setbits(be32, addr, set)
+#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
+
+#define clrbits_le32(addr, clear) clrbits(le32, addr, clear)
+#define setbits_le32(addr, set) setbits(le32, addr, set)
+#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
+
+#define clrbits_be16(addr, clear) clrbits(be16, addr, clear)
+#define setbits_be16(addr, set) setbits(be16, addr, set)
+#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
+
+#define clrbits_le16(addr, clear) clrbits(le16, addr, clear)
+#define setbits_le16(addr, set) setbits(le16, addr, set)
+#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
+
+#define clrbits_8(addr, clear) clrbits(8, addr, clear)
+#define setbits_8(addr, set) setbits(8, addr, set)
+#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
+
/*
* Given a physical address and a length, return a virtual address
* that can be used to access the memory range with the caching
typedef enum {
IBAT0 = 0, IBAT1, IBAT2, IBAT3,
- DBAT0, DBAT1, DBAT2, DBAT3
+ DBAT0, DBAT1, DBAT2, DBAT3,
+#ifdef CONFIG_HIGH_BATS
+ IBAT4, IBAT5, IBAT6, IBAT7,
+ DBAT4, DBAT5, DBAT6, DBAT7
+#endif
} ppc_bat_t;
extern int read_bat(ppc_bat_t bat, unsigned long *upper, unsigned long *lower);
extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
+extern void print_bats(void);
#endif /* __ASSEMBLY__ */
#define SR15 15
#ifndef __ASSEMBLY__
+
+struct cpu_type {
+ char name[15];
+ u32 soc_ver;
+};
+
+struct cpu_type *identify_cpu(uint ver);
+
+#define CPU_TYPE_ENTRY(n, v) \
+ { .name = #n, .soc_ver = SVR_##v, }
+
#ifndef CONFIG_MACH_SPECIFIC
extern int _machine;
extern int have_of;
--- /dev/null
+/*
+ * Header file for AT91/AT32 LCD Controller
+ *
+ * Data structure and register user interface
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ATMEL_LCDC_H__
+#define __ATMEL_LCDC_H__
+
+#define ATMEL_LCDC_DMABADDR1 0x00
+#define ATMEL_LCDC_DMABADDR2 0x04
+#define ATMEL_LCDC_DMAFRMPT1 0x08
+#define ATMEL_LCDC_DMAFRMPT2 0x0c
+#define ATMEL_LCDC_DMAFRMADD1 0x10
+#define ATMEL_LCDC_DMAFRMADD2 0x14
+
+#define ATMEL_LCDC_DMAFRMCFG 0x18
+#define ATMEL_LCDC_FRSIZE (0x7fffff << 0)
+#define ATMEL_LCDC_BLENGTH_OFFSET 24
+#define ATMEL_LCDC_BLENGTH (0x7f << ATMEL_LCDC_BLENGTH_OFFSET)
+
+#define ATMEL_LCDC_DMACON 0x1c
+#define ATMEL_LCDC_DMAEN (0x1 << 0)
+#define ATMEL_LCDC_DMARST (0x1 << 1)
+#define ATMEL_LCDC_DMABUSY (0x1 << 2)
+#define ATMEL_LCDC_DMAUPDT (0x1 << 3)
+#define ATMEL_LCDC_DMA2DEN (0x1 << 4)
+
+#define ATMEL_LCDC_DMA2DCFG 0x20
+#define ATMEL_LCDC_ADDRINC_OFFSET 0
+#define ATMEL_LCDC_ADDRINC (0xffff)
+#define ATMEL_LCDC_PIXELOFF_OFFSET 24
+#define ATMEL_LCDC_PIXELOFF (0x1f << 24)
+
+#define ATMEL_LCDC_LCDCON1 0x0800
+#define ATMEL_LCDC_BYPASS (1 << 0)
+#define ATMEL_LCDC_CLKVAL_OFFSET 12
+#define ATMEL_LCDC_CLKVAL (0x1ff << ATMEL_LCDC_CLKVAL_OFFSET)
+#define ATMEL_LCDC_LINCNT (0x7ff << 21)
+
+#define ATMEL_LCDC_LCDCON2 0x0804
+#define ATMEL_LCDC_DISTYPE (3 << 0)
+#define ATMEL_LCDC_DISTYPE_STNMONO (0 << 0)
+#define ATMEL_LCDC_DISTYPE_STNCOLOR (1 << 0)
+#define ATMEL_LCDC_DISTYPE_TFT (2 << 0)
+#define ATMEL_LCDC_SCANMOD (1 << 2)
+#define ATMEL_LCDC_SCANMOD_SINGLE (0 << 2)
+#define ATMEL_LCDC_SCANMOD_DUAL (1 << 2)
+#define ATMEL_LCDC_IFWIDTH (3 << 3)
+#define ATMEL_LCDC_IFWIDTH_4 (0 << 3)
+#define ATMEL_LCDC_IFWIDTH_8 (1 << 3)
+#define ATMEL_LCDC_IFWIDTH_16 (2 << 3)
+#define ATMEL_LCDC_PIXELSIZE (7 << 5)
+#define ATMEL_LCDC_PIXELSIZE_1 (0 << 5)
+#define ATMEL_LCDC_PIXELSIZE_2 (1 << 5)
+#define ATMEL_LCDC_PIXELSIZE_4 (2 << 5)
+#define ATMEL_LCDC_PIXELSIZE_8 (3 << 5)
+#define ATMEL_LCDC_PIXELSIZE_16 (4 << 5)
+#define ATMEL_LCDC_PIXELSIZE_24 (5 << 5)
+#define ATMEL_LCDC_PIXELSIZE_32 (6 << 5)
+#define ATMEL_LCDC_INVVD (1 << 8)
+#define ATMEL_LCDC_INVVD_NORMAL (0 << 8)
+#define ATMEL_LCDC_INVVD_INVERTED (1 << 8)
+#define ATMEL_LCDC_INVFRAME (1 << 9 )
+#define ATMEL_LCDC_INVFRAME_NORMAL (0 << 9)
+#define ATMEL_LCDC_INVFRAME_INVERTED (1 << 9)
+#define ATMEL_LCDC_INVLINE (1 << 10)
+#define ATMEL_LCDC_INVLINE_NORMAL (0 << 10)
+#define ATMEL_LCDC_INVLINE_INVERTED (1 << 10)
+#define ATMEL_LCDC_INVCLK (1 << 11)
+#define ATMEL_LCDC_INVCLK_NORMAL (0 << 11)
+#define ATMEL_LCDC_INVCLK_INVERTED (1 << 11)
+#define ATMEL_LCDC_INVDVAL (1 << 12)
+#define ATMEL_LCDC_INVDVAL_NORMAL (0 << 12)
+#define ATMEL_LCDC_INVDVAL_INVERTED (1 << 12)
+#define ATMEL_LCDC_CLKMOD (1 << 15)
+#define ATMEL_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15)
+#define ATMEL_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15)
+#define ATMEL_LCDC_MEMOR (1 << 31)
+#define ATMEL_LCDC_MEMOR_BIG (0 << 31)
+#define ATMEL_LCDC_MEMOR_LITTLE (1 << 31)
+
+#define ATMEL_LCDC_TIM1 0x0808
+#define ATMEL_LCDC_VFP (0xffU << 0)
+#define ATMEL_LCDC_VBP_OFFSET 8
+#define ATMEL_LCDC_VBP (0xffU << ATMEL_LCDC_VBP_OFFSET)
+#define ATMEL_LCDC_VPW_OFFSET 16
+#define ATMEL_LCDC_VPW (0x3fU << ATMEL_LCDC_VPW_OFFSET)
+#define ATMEL_LCDC_VHDLY_OFFSET 24
+#define ATMEL_LCDC_VHDLY (0xfU << ATMEL_LCDC_VHDLY_OFFSET)
+
+#define ATMEL_LCDC_TIM2 0x080c
+#define ATMEL_LCDC_HBP (0xffU << 0)
+#define ATMEL_LCDC_HPW_OFFSET 8
+#define ATMEL_LCDC_HPW (0x3fU << ATMEL_LCDC_HPW_OFFSET)
+#define ATMEL_LCDC_HFP_OFFSET 21
+#define ATMEL_LCDC_HFP (0x7ffU << ATMEL_LCDC_HFP_OFFSET)
+
+#define ATMEL_LCDC_LCDFRMCFG 0x0810
+#define ATMEL_LCDC_LINEVAL (0x7ff << 0)
+#define ATMEL_LCDC_HOZVAL_OFFSET 21
+#define ATMEL_LCDC_HOZVAL (0x7ff << ATMEL_LCDC_HOZVAL_OFFSET)
+
+#define ATMEL_LCDC_FIFO 0x0814
+#define ATMEL_LCDC_FIFOTH (0xffff)
+
+#define ATMEL_LCDC_MVAL 0x0818
+
+#define ATMEL_LCDC_DP1_2 0x081c
+#define ATMEL_LCDC_DP4_7 0x0820
+#define ATMEL_LCDC_DP3_5 0x0824
+#define ATMEL_LCDC_DP2_3 0x0828
+#define ATMEL_LCDC_DP5_7 0x082c
+#define ATMEL_LCDC_DP3_4 0x0830
+#define ATMEL_LCDC_DP4_5 0x0834
+#define ATMEL_LCDC_DP6_7 0x0838
+#define ATMEL_LCDC_DP1_2_VAL (0xff)
+#define ATMEL_LCDC_DP4_7_VAL (0xfffffff)
+#define ATMEL_LCDC_DP3_5_VAL (0xfffff)
+#define ATMEL_LCDC_DP2_3_VAL (0xfff)
+#define ATMEL_LCDC_DP5_7_VAL (0xfffffff)
+#define ATMEL_LCDC_DP3_4_VAL (0xffff)
+#define ATMEL_LCDC_DP4_5_VAL (0xfffff)
+#define ATMEL_LCDC_DP6_7_VAL (0xfffffff)
+
+#define ATMEL_LCDC_PWRCON 0x083c
+#define ATMEL_LCDC_PWR (1 << 0)
+#define ATMEL_LCDC_GUARDT_OFFSET 1
+#define ATMEL_LCDC_GUARDT (0x7f << ATMEL_LCDC_GUARDT_OFFSET)
+#define ATMEL_LCDC_BUSY (1 << 31)
+
+#define ATMEL_LCDC_CONTRAST_CTR 0x0840
+#define ATMEL_LCDC_PS (3 << 0)
+#define ATMEL_LCDC_PS_DIV1 (0 << 0)
+#define ATMEL_LCDC_PS_DIV2 (1 << 0)
+#define ATMEL_LCDC_PS_DIV4 (2 << 0)
+#define ATMEL_LCDC_PS_DIV8 (3 << 0)
+#define ATMEL_LCDC_POL (1 << 2)
+#define ATMEL_LCDC_POL_NEGATIVE (0 << 2)
+#define ATMEL_LCDC_POL_POSITIVE (1 << 2)
+#define ATMEL_LCDC_ENA (1 << 3)
+#define ATMEL_LCDC_ENA_PWMDISABLE (0 << 3)
+#define ATMEL_LCDC_ENA_PWMENABLE (1 << 3)
+
+#define ATMEL_LCDC_CONTRAST_VAL 0x0844
+#define ATMEL_LCDC_CVAL (0xff)
+
+#define ATMEL_LCDC_IER 0x0848
+#define ATMEL_LCDC_IDR 0x084c
+#define ATMEL_LCDC_IMR 0x0850
+#define ATMEL_LCDC_ISR 0x0854
+#define ATMEL_LCDC_ICR 0x0858
+#define ATMEL_LCDC_LNI (1 << 0)
+#define ATMEL_LCDC_LSTLNI (1 << 1)
+#define ATMEL_LCDC_EOFI (1 << 2)
+#define ATMEL_LCDC_UFLWI (1 << 4)
+#define ATMEL_LCDC_OWRI (1 << 5)
+#define ATMEL_LCDC_MERI (1 << 6)
+
+#define ATMEL_LCDC_LUT(n) (0x0c00 + ((n)*4))
+
+#endif /* __ATMEL_LCDC_H__ */
(__x > __y) ? __x : __y; })
+/**
+ * container_of - cast a member of a structure out to the containing structure
+ * @ptr: the pointer to the member.
+ * @type: the type of the container struct this is embedded in.
+ * @member: the name of the member within the struct.
+ *
+ */
+#define container_of(ptr, type, member) ({ \
+ const typeof( ((type *)0)->member ) *__mptr = (ptr); \
+ (type *)( (char *)__mptr - offsetof(type,member) );})
+
/*
* Function Prototypes
*/
#define CONFIG_MPC8220 1
#define CONFIG_ALASKA8220 1 /* ... on Alaska board */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to
determine the CPU speed. */
#define CFG_MPC8220_CLKIN 30000000/* ... running at 30MHz */
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
#undef CONFIG_ECC /* enable ECC support */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* which initialization functions to call for this board */
#define CONFIG_MISC_INIT_R
#define CONFIG_BOARD_PRE_INIT
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
#define CFG_HID2 HID2_HBE
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* DDR @ 0x00000000 */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10)
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
#define CFG_OR0_PRELIM ( (~(CFG_FLASH_SIZE - 1) << 20) \
| OR_UPM_XAM \
| OR_GPCM_CSNT \
- | OR_GPCM_ACS_0b11 \
+ | OR_GPCM_ACS_DIV2 \
| OR_GPCM_XACS \
| OR_GPCM_SCY_15 \
| OR_GPCM_TRLX \
/*
* MMU Setup
*/
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/* DDR: cache cacheable */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
/*
* MMU Setup
*/
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/* DDR: cache cacheable */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
* MMU Setup
*/
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* DDR: cache cacheable */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
(2 << BR_PS_SHIFT) | /* 16 bit port size */ \
BR_V) /* valid */
#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
- OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
+ OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* window base at flash base */
#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32 MB window size */
#define CFG_HID2 HID2_HBE
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/* DDR @ 0x00000000 */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_V)
#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
- OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
+ OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE
#define CFG_LBLAWAR0_PRELIM (LBLAWAR_EN | (0x13 + CFG_FLASH_SIZE_SHIFT))
#define CFG_LED_BASE 0xF9000000
#define CFG_BR2_PRELIM (CFG_LED_BASE | BR_PS_8 | BR_V)
-#define CFG_OR2_PRELIM (OR_AM_2MB | OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | \
+#define CFG_OR2_PRELIM (OR_AM_2MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
OR_GPCM_XACS | OR_GPCM_SCY_9 | OR_GPCM_TRLX | \
OR_GPCM_EHTR | OR_GPCM_EAD)
#define CFG_HID0_FINAL CFG_HID0_INIT
#define CFG_HID2 HID2_HBE
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/* DDR */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
(2 << BR_PS_SHIFT) | /* 16 bit port size */ \
BR_V) /* valid */
#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
- OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
+ OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
* MMU Setup
*/
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* DDR: cache cacheable */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
(2 << BR_PS_SHIFT) | /* 16 bit port size */ \
BR_V) /* valid */
#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
- OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | \
+ OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
OR_GPCM_XACS | OR_GPCM_SCY_15 | \
OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
* MMU Setup
*/
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* DDR: cache cacheable */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
#define CFG_OR0_PRELIM ( (~(CFG_FLASH_SIZE - 1) << 20) \
| OR_UPM_XAM \
| OR_GPCM_CSNT \
- | OR_GPCM_ACS_0b11 \
+ | OR_GPCM_ACS_DIV2 \
| OR_GPCM_XACS \
| OR_GPCM_SCY_15 \
| OR_GPCM_TRLX \
/*
* MMU Setup
*/
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/* DDR: cache cacheable */
#define CFG_SDRAM_LOWER CFG_SDRAM_BASE
* MMU Setup
*/
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* DDR: cache cacheable */
#define CFG_SDRAM_LOWER CFG_SDRAM_BASE
#define CFG_SDRAM_UPPER (CFG_SDRAM_BASE + 0x10000000)
#define CONFIG_BTB /* toggle branch predition */
#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
-
-#undef CFG_DRAM_TEST /* memory test, takes time */
#define CFG_MEMTEST_START 0x00200000 /* memtest region */
#define CFG_MEMTEST_END 0x00400000
#define CONFIG_BTB /* toggle branch predition */
#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
-
-#undef CFG_DRAM_TEST /* memory test, takes time */
#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
#define CFG_MEMTEST_END 0x00400000
#define CONFIG_L2_CACHE /* toggle L2 cache */
#define CONFIG_BTB /* toggle branch predition */
#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
-#define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */
/*
* Only possible on E500 Version 2 or newer cores.
*/
#define CONFIG_ENABLE_36BIT_PHYS 1
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
-
-#undef CFG_DRAM_TEST /* memory test, takes time */
#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
#define CFG_MEMTEST_END 0x00400000
-#define CFG_ALT_MEMTEST
#define CONFIG_PANIC_HANG /* do not reset board on panic */
/*
#undef CFG_FLASH_CHECKSUM
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
*/
#define CONFIG_ENABLE_36BIT_PHYS 1
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
-
-#undef CFG_DRAM_TEST /* memory test, takes time */
#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
#define CFG_MEMTEST_END 0x00400000
#define CONFIG_BTB /* toggle branch predition */
#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
-
-#undef CFG_DRAM_TEST /* memory test, takes time */
#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
#define CFG_MEMTEST_END 0x00400000
#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
#define CONFIG_CPM2 1 /* has CPM2 */
#define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific */
+#define CONFIG_MPC8560 1
#define CONFIG_PCI
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_BTB /* toggle branch predition */
#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
-
#define CFG_INIT_DBCR DBCR_IDM /* Enable Debug Exceptions */
-#undef CFG_DRAM_TEST /* memory test, takes time */
#define CFG_MEMTEST_START 0x00200000 /* memtest region */
#define CFG_MEMTEST_END 0x00400000
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
-#undef CFG_DRAM_TEST /* memory test, takes time */
#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
#define CFG_MEMTEST_END 0x00400000
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported & enabled */
#define CONFIG_ALTIVEC 1
/*
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
#define CONFIG_MISC_INIT_R 1
-#undef CFG_DRAM_TEST /* memory test, takes time */
#define CFG_MEMTEST_START 0x00200000 /* memtest region */
#define CFG_MEMTEST_END 0x00400000
-#define CFG_ALT_MEMTEST
/*
* Base addresses -- Note these are effective addresses where the
#define BANK_INTERLEAVING 0x22000000
#define SUPER_BANK_INTERLEAVING 0x23000000
+#define CONFIG_HIGH_BATS 1 /* High BATs supported and enabled */
#define CONFIG_ALTIVEC 1
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
-#undef CFG_DRAM_TEST /* memory test, takes time */
#define CFG_MEMTEST_START 0x00200000 /* memtest region */
#define CFG_MEMTEST_END 0x00400000
--- /dev/null
+/*
+ * Copyright (C) Matrix Vision GmbH 2008
+ *
+ * Matrix Vision mvBlueLYNX-M7 configuration file
+ * based on Freescale's MPC8349ITX.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define MV_VERSION "v1.0.1"
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300 1
+#define CONFIG_MPC83XX 1
+#define CONFIG_MPC834X 1
+#define CONFIG_MPC8343 1
+
+#define CFG_IMMR 0xE0000000
+
+#define CONFIG_PCI
+#define CONFIG_83XX_GENERIC_PCI
+#define CONFIG_PCI_SKIP_HOST_BRIDGE
+#define CONFIG_HARD_I2C
+#define CONFIG_TSEC_ENET
+#define CONFIG_MPC8XXX_SPI
+#define CONFIG_HARD_SPI
+#define MVBLM7_MMC_CS 0x04000000
+
+/* I2C */
+#undef CONFIG_SOFT_I2C
+
+#define CONFIG_FSL_I2C
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CFG_I2C_OFFSET 0x3000
+#define CFG_I2C2_OFFSET 0x3100
+
+#define CFG_I2C_SPEED 100000
+#define CFG_I2C_SLAVE 0x7F
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_BASE 0x00000000
+#define CFG_SDRAM_BASE CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
+#define CFG_83XX_DDR_USES_CS0 1
+#define CFG_MEMTEST_START (60<<20)
+#define CFG_MEMTEST_END (70<<20)
+
+#define CFG_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \
+ DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
+
+#define CFG_DDR_SIZE 256
+
+/* HC, 75Ohm, DDR-II, DRQ */
+#define CFG_DDRCDR 0x80000001
+/* EN, ODT_WR, 3BA, 14row, 10col */
+#define CFG_DDR_CS0_CONFIG 0x80014102
+#define CFG_DDR_CS1_CONFIG 0x0
+#define CFG_DDR_CS2_CONFIG 0x0
+#define CFG_DDR_CS3_CONFIG 0x0
+
+#define CFG_DDR_CS0_BNDS 0x0000000f
+#define CFG_DDR_CS1_BNDS 0x0
+#define CFG_DDR_CS2_BNDS 0x0
+#define CFG_DDR_CS3_BNDS 0x0
+
+#define CFG_DDR_CLK_CNTL 0x02000000
+
+#define CFG_DDR_TIMING_0 0x00260802
+#define CFG_DDR_TIMING_1 0x2625b221
+#define CFG_DDR_TIMING_2 0x1f9820c7
+#define CFG_DDR_TIMING_3 0x00000000
+
+/* ~MEM_EN, SREN, DDR-II, 32_BE */
+#define CFG_DDR_SDRAM_CFG 0x43080000
+#define CFG_DDR_SDRAM_CFG2 0x00401000
+#define CFG_DDR_INTERVAL 0x04060100
+
+#define CFG_DDR_MODE 0x078e0232
+
+/* Flash */
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+
+#define CFG_FLASH_BASE 0xFF800000
+#define CFG_FLASH_SIZE 8
+#define CFG_FLASH_SIZE_SHIFT 3
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_ERASE_TOUT 60000
+#define CFG_FLASH_WRITE_TOUT 500
+#define CFG_MAX_FLASH_BANKS 1
+#define CFG_MAX_FLASH_SECT 256
+
+#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_V)
+#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
+ OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS|\
+ OR_GPCM_SCY_15 | OR_GPCM_TRLX | OR_GPCM_EHTR | \
+ OR_GPCM_EAD)
+#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE
+#define CFG_LBLAWAR0_PRELIM (LBLAWAR_EN | (0x13 + CFG_FLASH_SIZE_SHIFT))
+
+/*
+ * U-Boot memory configuration
+ */
+#define CFG_MONITOR_BASE TEXT_BASE
+#undef CFG_RAMBOOT
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK
+#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/
+
+#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
+#define CFG_MONITOR_LEN (512 * 1024)
+#define CFG_MALLOC_LEN (512 * 1024)
+
+/*
+ * Local Bus LCRR and LBCR regs
+ * LCRR: DLL bypass, Clock divider is 4
+ * External Local Bus rate is
+ * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
+ */
+#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CFG_LBC_LBCR 0x00000000
+
+/* LB sdram refresh timer, about 6us */
+#define CFG_LBC_LSRT 0x32000000
+/* LB refresh timer prescal, 266MHz/32*/
+#define CFG_LBC_MRTPR 0x20000000
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
+
+#define CONFIG_CONSOLE ttyS0
+#define CONFIG_BAUDRATE 115200
+
+#define CFG_NS16550_COM1 (CFG_IMMR + 0x4500)
+#define CFG_NS16550_COM2 (CFG_IMMR + 0x4600)
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
+#define MV_DTB_NAME "mvblm7.dtb"
+
+/*
+ * PCI
+ */
+#define CFG_PCI1_MEM_BASE 0x80000000
+#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE 0x10000000
+#define CFG_PCI1_MMIO_BASE (CFG_PCI1_MEM_BASE + CFG_PCI1_MEM_SIZE)
+#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE
+#define CFG_PCI1_MMIO_SIZE 0x10000000
+#define CFG_PCI1_IO_BASE 0x00000000
+#define CFG_PCI1_IO_PHYS 0xE2000000
+#define CFG_PCI1_IO_SIZE 0x01000000
+
+#define _IO_BASE 0x00000000
+
+#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_RETRY_COUNT 3
+
+#define PCI_66M
+#define CONFIG_83XX_CLKIN 66666667
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW
+
+/* TSEC */
+#define CONFIG_GMII
+#define CFG_VSC8601_SKEWFIX
+#define CFG_VSC8601_SKEW_TX 3
+#define CFG_VSC8601_SKEW_RX 3
+
+#define CONFIG_TSEC1
+#define CONFIG_TSEC2
+
+#define CONFIG_HAS_ETH0
+#define CONFIG_TSEC1_NAME "TSEC0"
+#define CONFIG_FEC1_PHY_NORXERR
+#define CFG_TSEC1_OFFSET 0x24000
+#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET)
+#define TSEC1_PHY_ADDR 0x10
+#define TSEC1_PHYIDX 0
+#define TSEC1_FLAGS (TSEC_GIGABIT|TSEC_REDUCED)
+
+#define CONFIG_HAS_ETH1
+#define CONFIG_TSEC2_NAME "TSEC1"
+#define CONFIG_FEC2_PHY_NORXERR
+#define CFG_TSEC2_OFFSET 0x25000
+#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET)
+#define TSEC2_PHY_ADDR 0x11
+#define TSEC2_PHYIDX 0
+#define TSEC2_FLAGS (TSEC_GIGABIT|TSEC_REDUCED)
+
+#define CONFIG_ETHPRIME "TSEC0"
+
+#define CONFIG_BOOTP_VENDOREX
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_NTPSERVER
+#define CONFIG_BOOTP_RANDOM_DELAY
+#define CONFIG_BOOTP_SEND_HOSTNAME
+
+/* USB */
+#define CONFIG_HAS_FSL_DR_USB
+
+/*
+ * Environment
+ */
+#undef CFG_FLASH_PROTECTION
+#define CONFIG_ENV_OVERWRITE
+
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR 0xFF800000
+#define CFG_ENV_SIZE 0x2000
+#define CFG_ENV_SECT_SIZE 0x2000
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR+CFG_ENV_SIZE)
+#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE
+
+#define CONFIG_LOADS_ECHO
+#define CFG_LOADS_BAUD_CHANGE
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_FPGA
+
+#undef CONFIG_WATCHDOG
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+
+/* default load address */
+#define CFG_LOAD_ADDR 0x2000000
+/* default location for tftp and bootm */
+#define CONFIG_LOADADDR 0x200000
+
+#define CFG_PROMPT "mvBL-M7> "
+#define CFG_CBSIZE 256
+
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_MAXARGS 16
+#define CFG_BARGSIZE CFG_CBSIZE
+#define CFG_HZ 1000
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+
+#define CFG_HRCW_LOW 0x0
+#define CFG_HRCW_HIGH 0x0
+
+/*
+ * System performance
+ */
+#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */
+#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */
+#define CFG_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */
+#define CFG_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */
+
+/* clocking */
+#define CFG_SCCR_ENCCM 0
+#define CFG_SCCR_USBMPHCM 0
+#define CFG_SCCR_USBDRCM 2
+#define CFG_SCCR_TSEC1CM 1
+#define CFG_SCCR_TSEC2CM 1
+
+#define CFG_SICRH 0x1fff8003
+#define CFG_SICRL (SICRL_LDP_A | SICRL_USB1 | SICRL_USB0)
+
+#define CFG_HID0_INIT 0x000000000
+#define CFG_HID0_FINAL CFG_HID0_INIT
+
+#define CFG_HID2 HID2_HBE
+
+/* DDR */
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* PCI */
+#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT |\
+ BATL_GUARDEDSTORAGE)
+#define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* no PCI2 */
+#define CFG_IBAT3L 0
+#define CFG_IBAT3U 0
+#define CFG_IBAT4L 0
+#define CFG_IBAT4U 0
+
+/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
+#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | \
+ BATL_GUARDEDSTORAGE)
+#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* stack in DCACHE 0xFDF00000 & FLASH @ 0xFF800000 */
+#define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT7L 0
+#define CFG_IBAT7U 0
+
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+#define CFG_DBAT2L CFG_IBAT2L
+#define CFG_DBAT2U CFG_IBAT2U
+#define CFG_DBAT3L CFG_IBAT3L
+#define CFG_DBAT3U CFG_IBAT3U
+#define CFG_DBAT4L CFG_IBAT4L
+#define CFG_DBAT4U CFG_IBAT4U
+#define CFG_DBAT5L CFG_IBAT5L
+#define CFG_DBAT5U CFG_IBAT5U
+#define CFG_DBAT6L CFG_IBAT6L
+#define CFG_DBAT6U CFG_IBAT6U
+#define CFG_DBAT7L CFG_IBAT7L
+#define CFG_DBAT7U CFG_IBAT7U
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_NETDEV eth0
+
+/* Default path and filenames */
+#define CONFIG_BOOTDELAY 5
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_STOP_STR "s"
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+#define CONFIG_RESET_TO_RETRY 1000
+
+#define MV_CI "mvBL-M7"
+#define MV_VCI "mvBL-M7"
+#define MV_FPGA_DATA "0xfff80000"
+#define MV_FPGA_SIZE "0x76ca2"
+#define MV_KERNEL_ADDR "0xff810000"
+#define MV_INITRD_ADDR "0xffc00000"
+#define MV_AUTOSCR_ADDR "0xff804000"
+#define MV_AUTOSCR_ADDR2 "0xff806000"
+#define MV_DTB_ADDR "0xff808000"
+#define MV_INITRD_LENGTH "0x00300000"
+
+#define CONFIG_SHOW_BOOT_PROGRESS 1
+
+#define MV_KERNEL_ADDR_RAM "0x00100000"
+#define MV_DTB_ADDR_RAM "0x00600000"
+#define MV_INITRD_ADDR_RAM "0x01000000"
+
+#define CONFIG_BOOTCOMMAND "if imi ${autoscr_addr}; \
+ then autoscr ${autoscr_addr}; \
+ else autoscr ${autoscr_addr2}; \
+ fi;"
+#define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console_nr=0\0" \
+ "stdin=serial\0" \
+ "stdout=serial\0" \
+ "stderr=serial\0" \
+ "fpga=0\0" \
+ "fpgadata=" MV_FPGA_DATA "\0" \
+ "fpgadatasize=" MV_FPGA_SIZE "\0" \
+ "autoscr_addr=" MV_AUTOSCR_ADDR "\0" \
+ "autoscr_addr2=" MV_AUTOSCR_ADDR2 "\0" \
+ "mv_kernel_addr=" MV_KERNEL_ADDR "\0" \
+ "mv_kernel_addr_ram=" MV_KERNEL_ADDR_RAM "\0" \
+ "mv_initrd_addr=" MV_INITRD_ADDR "\0" \
+ "mv_initrd_addr_ram=" MV_INITRD_ADDR_RAM "\0" \
+ "mv_initrd_length=" MV_INITRD_LENGTH "\0" \
+ "mv_dtb_addr=" MV_DTB_ADDR "\0" \
+ "mv_dtb_addr_ram=" MV_DTB_ADDR_RAM "\0" \
+ "dtb_name=" MV_DTB_NAME "\0" \
+ "mv_version=" MV_VERSION "\0" \
+ "dhcp_client_id=" MV_CI "\0" \
+ "dhcp_vendor-class-identifier=" MV_VCI "\0" \
+ "netretry=no\0" \
+ "use_static_ipaddr=no\0" \
+ "static_ipaddr=192.168.90.10\0" \
+ "static_netmask=255.255.255.0\0" \
+ "static_gateway=0.0.0.0\0" \
+ "initrd_name=uInitrd.mvblm7-xenorfs\0" \
+ "zcip=no\0" \
+ "netboot=yes\0" \
+ "mvtest=Ff\0" \
+ "tried_bootfromflash=no\0" \
+ "tried_bootfromnet=no\0" \
+ "bootfile=mvblm72625.boot\0" \
+ "use_dhcp=yes\0" \
+ "gev_start=yes\0" \
+ "mvbcdma_debug=0\0" \
+ "mvbcia_debug=0\0" \
+ "propdev_debug=0\0" \
+ "gevss_debug=0\0" \
+ "watchdog=0\0" \
+ "usb_dr_mode=host\0" \
+ ""
+
+#define CONFIG_FPGA_COUNT 1
+#define CONFIG_FPGA CFG_ALTERA_CYCLON2
+#define CONFIG_FPGA_ALTERA
+#define CONFIG_FPGA_CYCLON2
+
+#endif
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
#define CONFIG_CPM2 1 /* has CPM2 */
#define CONFIG_SBC8540 1 /* configuration for SBC8560 board */
+#define CONFIG_MPC8540 1
#define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific (supplement) */
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
BR_MS_GPCM | BR_PS_32 | BR_V)
/* FLASH timing (0x0000_0c54) */
-#define CFG_OR_TIMING_FLASH (OR_GPCM_CSNT | OR_GPCM_ACS_0b10 | \
+#define CFG_OR_TIMING_FLASH (OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | \
OR_GPCM_SCY_5 | OR_GPCM_TRLX)
#define CFG_PRELIM_OR_AM 0xc0000000 /* OR addr mask: 1 GiB */
#define CFG_HID0_FINAL CFG_HID0_INIT
#define CFG_HID2 HID2_HBE
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* DDR 0 - 512M */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
/*
+ * (C) Copyright 2007
+ * Thomas Waehner, TQ-System GmbH, thomas.waehner@tqs.de.
+ *
* (C) Copyright 2005
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
*/
/*
- * TQM85xx (8560/40/55/41) board configuration file
+ * TQM85xx (8560/40/55/41/48) board configuration file
*/
#ifndef __CONFIG_H
#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41 */
#define CONFIG_PCI
+#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+#define CONFIG_PCIX_CHECK /* PCIX olny works at 66 MHz */
+#ifdef CONFIG_TQM8548
+#define CONFIG_PCI1
+#define CONFIG_PCIE1
+#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
+#endif
+
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
+ /*
+ * Configuration for big NOR Flashes
+ *
+ * Define CONFIG_TQM_BIGFLASH for boards with more than 128 MiB NOR Flash.
+ * Please be aware, that this changes the whole memory map (new CCSRBAR
+ * address, etc). You have to use an adapted Linux kernel or FDT blob
+ * if this option is set.
+ */
+#undef CONFIG_TQM_BIGFLASH
+
+/*
+ * NAND flash support (disabled by default)
+ *
+ * Warning: NAND support will likely increase the U-Boot image size
+ * to more than 256 KB. Please adjust TEXT_BASE if necessary.
+ */
+#undef CONFIG_NAND
+
/*
- * Only MPC8540 doesn't have CPM module
+ * MPC8540 and MPC8548 don't have CPM module
*/
-#ifndef CONFIG_MPC8540
+#if !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8548)
#define CONFIG_CPM2 1 /* has CPM2 */
#endif
-#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
+#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
+
+#undef CONFIG_CAN_DRIVER /* CAN Driver support */
/*
* sysclk for MPC85xx
*
* Two valid values are:
- * 33000000
- * 66000000
+ * 33333333
+ * 66666666
*
* Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz
* is likely the desired value here, so that is now the default.
* actual resources get mapped (not physical addresses)
*/
#define CFG_CCSRBAR_DEFAULT 0xFF700000 /* CCSRBAR Default */
+#ifdef CONFIG_TQM_BIGFLASH
+#define CFG_CCSRBAR 0xA0000000 /* relocated CCSRBAR */
+#else /* !CONFIG_TQM_BIGFLASH */
#define CFG_CCSRBAR 0xE0000000 /* relocated CCSRBAR */
+#endif /* CONFIG_TQM_BIGFLASH */
#define CFG_CCSRBAR_PHYS CFG_CCSRBAR /* physical addr of CCSRBAR */
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
+#define CFG_PCI1_ADDR (CFG_CCSRBAR + 0x8000)
+#define CFG_PCI2_ADDR (CFG_CCSRBAR + 0x9000)
+#define CFG_PCIE1_ADDR (CFG_CCSRBAR + 0xa000)
+
/*
* DDR Setup
*/
/* TQM8540 & 8560 need DLL-override */
#define CONFIG_DDR_DLL /* DLL fix needed */
#define CONFIG_DDR_DEFAULT_CL 25 /* CAS latency 2,5 */
-#endif /* defined(CONFIG_TQM8540) || defined(CONFIG_TQM8560) */
+#endif /* CONFIG_TQM8540 || CONFIG_TQM8560 */
-#if defined(CONFIG_TQM8541) || defined(CONFIG_TQM8555)
+#if defined(CONFIG_TQM8541) || defined(CONFIG_TQM8555) || \
+ defined(CONFIG_TQM8548)
#define CONFIG_DDR_DEFAULT_CL 30 /* CAS latency 3 */
-#endif /* defined(CONFIG_TQM8541) || defined(CONFIG_TQM8555) */
+#endif /* CONFIG_TQM8541 || CONFIG_TQM8555 || CONFIG_TQM8548 */
+
+/*
+ * Old TQM85xx boards have 'M' type Spansion Flashes from the S29GLxxxM
+ * series while new boards have 'N' type Flashes from the S29GLxxxN
+ * series, which have bigger sectors: 2 x 128 instead of 2 x 64 KB.
+ */
+#ifdef CONFIG_TQM8548
+#define CONFIG_TQM_FLASH_N_TYPE
+#endif /* CONFIG_TQM8548 */
/*
* Flash on the Local Bus
*/
+#ifdef CONFIG_TQM_BIGFLASH
+#define CFG_FLASH0 0xE0000000
+#define CFG_FLASH1 0xC0000000
+#else /* !CONFIG_TQM_BIGFLASH */
#define CFG_FLASH0 0xFC000000
#define CFG_FLASH1 0xF8000000
+#endif /* CONFIG_TQM_BIGFLASH */
#define CFG_FLASH_BANKS_LIST { CFG_FLASH1, CFG_FLASH0 }
#define CFG_LBC_FLASH_BASE CFG_FLASH1 /* Localbus flash start */
-#define CFG_FLASH_BASE CFG_LBC_FLASH_BASE /* start of FLASH */
+#define CFG_FLASH_BASE CFG_LBC_FLASH_BASE /* start of FLASH */
+/* Default ORx timings are for <= 41.7 MHz Local Bus Clock.
+ *
+ * Note: According to timing specifications external addr latch delay
+ * (EAD, bit #0) must be set if Local Bus Clock is > 83 MHz.
+ *
+ * For other Local Bus Clocks see following table:
+ *
+ * Clock/MHz CFG_ORx_PRELIM
+ * 166 0x.....CA5
+ * 133 0x.....C85
+ * 100 0x.....C65
+ * 83 0x.....FA2
+ * 66 0x.....C82
+ * 50 0x.....C60
+ * 42 0x.....040
+ * 33 0x.....030
+ * 25 0x.....020
+ *
+ */
+#ifdef CONFIG_TQM_BIGFLASH
+#define CFG_BR0_PRELIM 0xE0001801 /* port size 32bit */
+#define CFG_OR0_PRELIM 0xE0000040 /* 512MB Flash */
+#define CFG_BR1_PRELIM 0xC0001801 /* port size 32bit */
+#define CFG_OR1_PRELIM 0xE0000040 /* 512MB Flash */
+#else /* !CONFIG_TQM_BIGFLASH */
#define CFG_BR0_PRELIM 0xfc001801 /* port size 32bit */
#define CFG_OR0_PRELIM 0xfc000040 /* 64MB Flash */
#define CFG_BR1_PRELIM 0xf8001801 /* port size 32bit */
#define CFG_OR1_PRELIM 0xfc000040 /* 64MB Flash */
+#endif /* CONFIG_TQM_BIGFLASH */
-#define CFG_FLASH_CFI /* flash is CFI compat. */
-#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver*/
+#define CFG_FLASH_CFI /* flash is CFI compat. */
+#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector */
#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash*/
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* speed up output to Flash */
-#define CFG_MAX_FLASH_BANKS 2 /* number of banks */
-#define CFG_MAX_FLASH_SECT 512 /* sectors per device */
+#define CFG_MAX_FLASH_BANKS 2 /* number of banks */
+#define CFG_MAX_FLASH_SECT 512 /* sectors per device */
#undef CFG_FLASH_CHECKSUM
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
-#define CFG_LBC_LCRR 0x00030008 /* LB clock ratio reg */
-#define CFG_LBC_LBCR 0x00000000 /* LB config reg */
-#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
-#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer presc.*/
+/*
+ * Note: when changing the Local Bus clock divider you have to
+ * change the timing values in CFG_ORx_PRELIM.
+ *
+ * LCRR[00:03] CLKDIV: System (CCB) clock divider. Valid values are 2, 4, 8.
+ * LCRR[16:17] EADC : External address delay cycles. It should be set to 2
+ * for Local Bus Clock > 83.3 MHz.
+ */
+#define CFG_LBC_LCRR 0x00030008 /* LB clock ratio reg */
+#define CFG_LBC_LBCR 0x00000000 /* LB config reg */
+#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
+#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer presc.*/
#define CONFIG_L1_INIT_RAM
#define CFG_INIT_RAM_LOCK 1
-#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
+#define CFG_INIT_RAM_ADDR (CFG_CCSRBAR \
+ + 0x04010000) /* Initial RAM address */
#define CFG_INIT_RAM_END 0x4000 /* End used area in RAM */
-#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data*/
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256kB for Mon*/
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+#define CFG_MONITOR_LEN (~TEXT_BASE + 1)/* Reserved for Monitor */
+#define CFG_MALLOC_LEN (384 * 1024) /* Reserved for malloc */
/* Serial Port */
#if defined(CONFIG_TQM8560)
-#define CONFIG_CONS_ON_SCC /* define if console on SCC */
-#undef CONFIG_CONS_NONE /* define if console on something else */
-#define CONFIG_CONS_INDEX 1 /* which serial channel for console */
+#define CONFIG_CONS_ON_SCC /* define if console on SCC */
+#undef CONFIG_CONS_NONE /* define if console on something else */
+#define CONFIG_CONS_INDEX 1 /* which serial channel for console */
-#else /* ! TQM8560 */
+#else /* !CONFIG_TQM8560 */
#define CONFIG_CONS_INDEX 1
#undef CONFIG_SERIAL_SOFTWARE_FIFO
#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
/* PS/2 Keyboard */
-#if !defined(CONFIG_TQM8560)
#define CONFIG_PS2KBD /* AT-PS/2 Keyboard */
#define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */
#define CONFIG_PS2SERIAL 2 /* .. on DUART2 */
#define CONFIG_PS2MULT_DELAY (CFG_HZ/2) /* Initial delay */
#define CONFIG_BOARD_EARLY_INIT_R 1
-#endif /* !CONFIG_TQM8560 */
#endif /* CONFIG_TQM8560 */
-#define CONFIG_BAUDRATE 115200
+#define CONFIG_BAUDRATE 115200
-#define CFG_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
+
+/* CAN */
+#define CFG_CAN_BASE (CFG_CCSRBAR \
+ + 0x03000000) /* CAN base address */
+#ifdef CONFIG_CAN_DRIVER
+#define CFG_CAN_OR_AM 0xFFFF8000 /* 32 KiB address mask */
+#define CFG_OR2_CAN (CFG_CAN_OR_AM | OR_UPM_BI)
+#define CFG_BR2_CAN ((CFG_CAN_BASE & BR_BA) | \
+ BR_PS_8 | BR_MS_UPMC | BR_V)
+#endif /* CONFIG_CAN_DRIVER */
/*
* I2C
*/
-#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
+#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */
#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
-#define CFG_I2C_MULTI_EEPROMS 1 /* more than one eeprom */
+#define CFG_I2C_MULTI_EEPROMS 1 /* more than one eeprom */
/* I2C SYSMON (LM75) */
#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
#define CFG_DTT_LOW_TEMP -30
#define CFG_DTT_HYSTERESIS 3
+#ifndef CONFIG_PCIE1
/* RapidIO MMU */
+#ifdef CONFIG_TQM_BIGFLASH
+#define CFG_RIO_MEM_BASE 0xb0000000 /* base address */
+#define CFG_RIO_MEM_SIZE 0x10000000 /* 256M */
+#else /* !CONFIG_TQM_BIGFLASH */
#define CFG_RIO_MEM_BASE 0xc0000000 /* base address */
+#define CFG_RIO_MEM_SIZE 0x20000000 /* 512M */
+#endif /* CONFIG_TQM_BIGFLASH */
#define CFG_RIO_MEM_PHYS CFG_RIO_MEM_BASE
-#define CFG_RIO_MEM_SIZE 0x20000000 /* 128M */
+#endif /* CONFIG_PCIE1 */
+
+/* NAND FLASH */
+#ifdef CONFIG_NAND
+
+#undef CFG_NAND_LEGACY
+
+#define CONFIG_NAND_FSL_UPM 1
+
+#define CONFIG_MTD_NAND_ECC_JFFS2 1 /* use JFFS2 ECC */
+
+/* address distance between chip selects */
+#define CFG_NAND_SELECT_DEVICE 1
+#define CFG_NAND_CS_DIST 0x200
+
+#define CFG_NAND_SIZE 0x8000
+#define CFG_NAND0_BASE (CFG_CCSRBAR + 0x03010000)
+#define CFG_NAND1_BASE (CFG_NAND0_BASE + CFG_NAND_CS_DIST)
+#define CFG_NAND2_BASE (CFG_NAND1_BASE + CFG_NAND_CS_DIST)
+#define CFG_NAND3_BASE (CFG_NAND2_BASE + CFG_NAND_CS_DIST)
+
+#define CFG_MAX_NAND_DEVICE 2 /* Max number of NAND devices */
+#define NAND_MAX_CHIPS 1
+
+#if (CFG_MAX_NAND_DEVICE == 1)
+#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE }
+#elif (CFG_MAX_NAND_DEVICE == 2)
+#define CFG_NAND_QUIET_TEST 1
+#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE, \
+ CFG_NAND1_BASE, \
+}
+#elif (CFG_MAX_NAND_DEVICE == 4)
+#define CFG_NAND_QUIET_TEST 1
+#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE, \
+ CFG_NAND1_BASE, \
+ CFG_NAND2_BASE, \
+ CFG_NAND3_BASE, \
+}
+#endif
+
+/* CS3 for NAND Flash */
+#define CFG_BR3_PRELIM ((CFG_NAND0_BASE & BR_BA) | BR_PS_8 | \
+ BR_MS_UPMB | BR_V)
+#define CFG_OR3_PRELIM (P2SZ_TO_AM(CFG_NAND_SIZE) | OR_UPM_BI)
+
+#define NAND_BIG_DELAY_US 25 /* max tR for Samsung devices */
+
+#endif /* CONFIG_NAND */
/*
* General PCI
#define CFG_PCI1_MEM_BASE 0x80000000
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
-#define CFG_PCI1_IO_BASE 0xe2000000
+#define CFG_PCI1_IO_BASE (CFG_CCSRBAR + 0x02000000)
#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
+#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
+
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS 0x00000000
+#define CFG_PCI_MEMORY_PHYS 0x00000000
+#define CFG_PCI_MEMORY_SIZE 0x80000000
+
+#ifdef CONFIG_PCIE1
+/*
+ * General PCI express
+ * Addresses are mapped 1-1.
+ */
+#ifdef CONFIG_TQM_BIGFLASH
+#define CFG_PCIE1_MEM_BASE 0xb0000000
+#define CFG_PCIE1_MEM_SIZE 0x10000000 /* 512M */
+#define CFG_PCIE1_IO_BASE 0xaf000000
+#else /* !CONFIG_TQM_BIGFLASH */
+#define CFG_PCIE1_MEM_BASE 0xc0000000
+#define CFG_PCIE1_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCIE1_IO_BASE 0xef000000
+#endif /* CONFIG_TQM_BIGFLASH */
+#define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE
+#define CFG_PCIE1_IO_PHYS CFG_PCIE1_IO_BASE
+#define CFG_PCIE1_IO_SIZE 0x1000000 /* 16M */
+#endif /* CONFIG_PCIE1 */
#if defined(CONFIG_PCI)
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
-#endif /* CONFIG_PCI */
-
+#endif /* CONFIG_PCI */
#define CONFIG_NET_MULTI 1
#define CONFIG_HAS_ETH1
#define CONFIG_HAS_ETH2
+#ifdef CONFIG_TQM8548
+/*
+ * TQM8548 has 4 ethernet ports. 4 ETSEC's.
+ *
+ * On the STK85xx Starterkit the ETSEC3/4 ports are on an
+ * additional adapter (AIO) between module and Starterkit.
+ */
+#define CONFIG_TSEC3 1
+#define CONFIG_TSEC3_NAME "TSEC2"
+#define CONFIG_TSEC4 1
+#define CONFIG_TSEC4_NAME "TSEC3"
+#define TSEC3_PHY_ADDR 4
+#define TSEC4_PHY_ADDR 5
+#define TSEC3_PHYIDX 0
+#define TSEC4_PHYIDX 0
+#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define CONFIG_HAS_ETH3
+#define CONFIG_HAS_ETH4
+#endif /* CONFIG_TQM8548 */
+
/* Options are TSEC[0-1], FEC */
#define CONFIG_ETHPRIME "TSEC0"
* FCC2: a - c (X50.2 - 1)
*/
#define CONFIG_ETHER_ON_FCC
-#define CONFIG_ETHER_INDEX 1 /* FCC channel for ethernet */
+#define CONFIG_ETHER_INDEX 1 /* FCC channel for ethernet */
#endif
#if defined(CONFIG_TQM8560)
* FCC3: a - d (X50.2 - 3)
*/
#define CONFIG_ETHER_ON_FCC
-#define CONFIG_ETHER_INDEX 3 /* FCC channel for ethernet */
+#define CONFIG_ETHER_INDEX 3 /* FCC channel for ethernet */
#endif
#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 1)
#define CONFIG_ETHER_ON_FCC1
-#define CFG_CMXFCR_MASK1 (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
+#define CFG_CMXFCR_MASK1 (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | \
+ CMXFCR_TF1CS_MSK)
#define CFG_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK12)
#define CFG_CPMFCR_RAMTYPE 0
#define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
#define CONFIG_ETHER_ON_FCC2
-#define CFG_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+#define CFG_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | \
+ CMXFCR_TF2CS_MSK)
#define CFG_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK16 | CMXFCR_TF2CS_CLK13)
#define CFG_CPMFCR_RAMTYPE 0
#define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3)
#define CONFIG_ETHER_ON_FCC3
-#define CFG_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
+#define CFG_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | \
+ CMXFCR_TF3CS_MSK)
#define CFG_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK14)
#define CFG_CPMFCR_RAMTYPE 0
#define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
* Environment
*/
#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x20000)
-#define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
+
+#ifdef CONFIG_TQM_FLASH_N_TYPE
+#define CFG_ENV_SECT_SIZE 0x40000 /* 256K (one sector) for env */
+#else /* !CONFIG_TQM_FLASH_N_TYPE */
+#define CFG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) for env */
+#endif /* CONFIG_TQM_FLASH_N_TYPE */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE 0x2000
-#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-#define CONFIG_TIMESTAMP /* Print image info with ts */
-
+#define CONFIG_TIMESTAMP /* Print image info with ts */
/*
* BOOTP options
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
+#ifdef CONFIG_NAND
+/*
+ * Use NAND-FLash as JFFS2 device
+ */
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_JFFS2
+
+#define CONFIG_JFFS2_NAND 1
+
+#ifdef CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT "nand0=TQM85xx-nand"
+#define MTDPARTS_DEFAULT "mtdparts=TQM85xx-nand:-"
+#else
+#define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */
+#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */
+#define CONFIG_JFFS2_PART_SIZE 0x200000 /* size of jffs2 partition */
+#endif /* CONFIG_JFFS2_CMDLINE */
+
+#endif /* CONFIG_NAND */
/*
* Command line configuration.
#define CONFIG_CMD_MII
#if defined(CONFIG_PCI)
- #define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCI
#endif
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
- #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
- #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buf Size */
+#define CFG_PBSIZE (CFG_CBSIZE + \
+ sizeof(CFG_PROMPT) + 16) /* Print Buf Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
-
#define CONFIG_LOADADDR 200000 /* default addr for tftp & bootm*/
#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
+
+/*
+ * Setup some board specific values for the default environment variables
+ */
+#ifdef CONFIG_CPM2
+#define CFG_ENV_CONSDEV "consdev=ttyCPM0\0"
+#else
+#define CFG_ENV_CONSDEV "consdev=ttyS0\0"
+#endif
+#define CFG_ENV_FDT_FILE "fdt_file="MK_STR(CONFIG_HOSTNAME)"/" \
+ MK_STR(CONFIG_HOSTNAME)".dtb\0"
+#define CFG_ENV_BOOTFILE "bootfile="MK_STR(CONFIG_HOSTNAME)"/uImage\0"
+#define CFG_ENV_UBOOT "uboot="MK_STR(CONFIG_HOSTNAME)"/u-boot.bin\0" \
+ "uboot_addr="MK_STR(TEXT_BASE)"\0"
+
#define CONFIG_EXTRA_ENV_SETTINGS \
- "bootfile="CFG_BOOTFILE_PATH"\0" \
+ CFG_ENV_BOOTFILE \
+ CFG_ENV_FDT_FILE \
+ CFG_ENV_CONSDEV \
"netdev=eth0\0" \
- "consdev=ttyS0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=$serverip:$rootpath\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addcons=setenv bootargs $bootargs " \
"console=$consdev,$baudrate\0" \
"flash_nfs=run nfsargs addip addcons;" \
- "bootm $kernel_addr\0" \
+ "bootm $kernel_addr - $fdt_addr\0" \
"flash_self=run ramargs addip addcons;" \
- "bootm $kernel_addr $ramdisk_addr\0" \
- "net_nfs=tftp $loadaddr $bootfile;" \
- "run nfsargs addip addcons;bootm\0" \
+ "bootm $kernel_addr $ramdisk_addr $fdt_addr\0" \
+ "net_nfs=tftp $kernel_addr_r $bootfile;" \
+ "tftp $fdt_addr_r $fdt_file;" \
+ "run nfsargs addip addcons;" \
+ "bootm $kernel_addr_r - $fdt_addr_r\0" \
"rootpath=/opt/eldk/ppc_85xx\0" \
- "kernel_addr=FE000000\0" \
- "ramdisk_addr=FE180000\0" \
- "load=tftp 100000 /tftpboot/$hostname/u-boot.bin\0" \
- "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
- "cp.b 100000 fffc0000 40000;" \
+ "fdt_addr_r=900000\0" \
+ "kernel_addr_r=1000000\0" \
+ "fdt_addr=ffec0000\0" \
+ "kernel_addr=ffd00000\0" \
+ "ramdisk_addr=ff800000\0" \
+ CFG_ENV_UBOOT \
+ "load=tftp 100000 $uboot\0" \
+ "update=protect off $uboot_addr +$filesize;" \
+ "erase $uboot_addr +$filesize;" \
+ "cp.b 100000 $uboot_addr $filesize;" \
"setenv filesize;saveenv\0" \
"upd=run load update\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
-#endif /* __CONFIG_H */
+#endif /* __CONFIG_H */
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
#define CONFIG_MPC8220 1
#define CONFIG_YUKON8220 1 /* ... on Yukon board */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to
determine the CPU speed. */
#define CFG_MPC8220_CLKIN 30000000/* ... running at 30MHz */
#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK
#define CFG_HID2 HID2_HBE
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Internal Definitions
*
#define CONFIG_AEVFIFO 1
#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#define __CONFIG_H
/* ARM asynchronous clock */
+#define AT91_CPU_NAME "AT91CAP9"
#define AT91_MAIN_CLOCK 200000000 /* from 12 MHz crystal */
#define AT91_MASTER_CLOCK 100000000 /* peripheral = main / 2 */
#define CFG_HZ 1000000 /* 1us resolution */
#undef CONFIG_USART2
#define CONFIG_USART3 1 /* USART 3 is DBGU */
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock1 rw rootfstype=jffs2"
+/* LCD */
+#define CONFIG_LCD 1
+#define LCD_BPP LCD_COLOR8
+#define CONFIG_LCD_LOGO 1
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO 1
+#define CONFIG_LCD_INFO_BELOW_LOGO 1
+#define CFG_WHITE_ON_BLACK 1
+#define CONFIG_ATMEL_LCD 1
+#define CONFIG_ATMEL_LCD_BGR555 1
+#define CFG_CONSOLE_IS_IN_ENV 1
-/* #define CONFIG_ENV_OVERWRITE 1 */
+#define CONFIG_BOOTDELAY 3
/*
* BOOTP options
#define CFG_SPI_WRITE_TOUT (5*CFG_HZ)
#define CFG_MAX_DATAFLASH_BANKS 1
#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
-#define AT91_SPI_CLK 20000000
-#define DATAFLASH_TCSS (0xFA << 16)
-#define DATAFLASH_TCHS (0x8 << 24)
+#define AT91_SPI_CLK 15000000
+#define DATAFLASH_TCSS (0x1a << 16)
+#define DATAFLASH_TCHS (0x1 << 24)
/* NOR flash */
#define CFG_FLASH_CFI 1
#define NAND_MAX_CHIPS 1
#define CFG_MAX_NAND_DEVICE 1
#define CFG_NAND_BASE 0x40000000
+#define CFG_NAND_DBW_8 1
/* Ethernet */
#define CONFIG_MACB 1
#define CFG_ENV_OFFSET 0x4200
#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
#define CFG_ENV_SIZE 0x4200
-#define CONFIG_BOOTCOMMAND "cp.b 0xC003DE00 0x72000000 0x200040; bootm"
+#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x72000000 0x210000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock1 " \
+ "mtdparts=physmap-flash.0:-(nor);" \
+ "at91_nand:-(root) " \
+ "rw rootfstype=jffs2"
#else
#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_ENV_OFFSET)
#define CFG_ENV_SIZE 0x4000
#define CONFIG_BOOTCOMMAND "cp.b 0x10040000 0x72000000 0x200000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock4 " \
+ "mtdparts=physmap-flash.0:16k(bootstrap)ro,"\
+ "16k(env),224k(uboot)ro,-(linux);" \
+ "at91_nand:-(root) " \
+ "rw rootfstype=jffs2"
#endif
#define CONFIG_USART3 1 /* USART 3 is DBGU */
#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock0 rw rootfstype=jffs2"
-
-/* #define CONFIG_ENV_OVERWRITE 1 */
/*
* BOOTP options
#define CFG_MAX_DATAFLASH_BANKS 2
#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
#define CFG_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */
-#define AT91_SPI_CLK 33000000
+#define AT91_SPI_CLK 15000000
#define DATAFLASH_TCSS (0x1a << 16)
#define DATAFLASH_TCHS (0x1 << 24)
#define NAND_MAX_CHIPS 1
#define CFG_MAX_NAND_DEVICE 1
#define CFG_NAND_BASE 0x40000000
+#define CFG_NAND_DBW_8 1
/* NOR flash - no real flash on this board */
#define CFG_NO_FLASH 1
#define CFG_ENV_OFFSET 0x4200
#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
#define CFG_ENV_SIZE 0x4200
-#define CONFIG_BOOTCOMMAND "cp.b 0xC003DE00 0x22000000 0x200040; bootm"
+#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock0 " \
+ "mtdparts=at91_nand:-(root) " \
+ "rw rootfstype=jffs2"
#elif CFG_USE_DATAFLASH_CS1
#define CFG_ENV_OFFSET 0x4200
#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS1 + CFG_ENV_OFFSET)
#define CFG_ENV_SIZE 0x4200
-#define CONFIG_BOOTCOMMAND "cp.b 0xD003DE00 0x22000000 0x200040; bootm"
+#define CONFIG_BOOTCOMMAND "cp.b 0xD0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock0 " \
+ "mtdparts=at91_nand:-(root) " \
+ "rw rootfstype=jffs2"
#else /* CFG_USE_NANDFLASH */
#define CFG_ENV_OFFSET_REDUND 0x80000
#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock5 " \
+ "mtdparts=at91_nand:128k(bootstrap)ro," \
+ "256k(uboot)ro,128k(env1)ro," \
+ "128k(env2)ro,2M(linux),-(root) " \
+ "rw rootfstype=jffs2"
#endif
--- /dev/null
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * Configuation settings for the AT91SAM9261EK board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91_CPU_NAME "AT91SAM9261"
+#define AT91_MAIN_CLOCK 198656000 /* from 18.432 MHz crystal */
+#define AT91_MASTER_CLOCK 99328000 /* peripheral = main / 2 */
+#define CFG_HZ 1000000 /* 1us resolution */
+
+#define AT91_SLOW_CLOCK 32768 /* slow clock */
+
+#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
+#define CONFIG_AT91SAM9261 1 /* It's an Atmel AT91SAM9261 SoC*/
+#define CONFIG_AT91SAM9261EK 1 /* on an AT91SAM9261EK Board */
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_ATMEL_USART 1
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3 1 /* USART 3 is DBGU */
+
+/* LCD */
+#define CONFIG_LCD 1
+#define LCD_BPP LCD_COLOR8
+#define CONFIG_LCD_LOGO 1
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO 1
+#define CONFIG_LCD_INFO_BELOW_LOGO 1
+#define CFG_WHITE_ON_BLACK 1
+#define CONFIG_ATMEL_LCD 1
+#define CONFIG_ATMEL_LCD_BGR555 1
+#define CFG_CONSOLE_IS_IN_ENV 1
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE 1
+#define CONFIG_BOOTP_BOOTPATH 1
+#define CONFIG_BOOTP_GATEWAY 1
+#define CONFIG_BOOTP_HOSTNAME 1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_CMD_PING 1
+#define CONFIG_CMD_DHCP 1
+#define CONFIG_CMD_NAND 1
+#define CONFIG_CMD_USB 1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM 0x20000000
+#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
+
+/* DataFlash */
+#define CONFIG_HAS_DATAFLASH 1
+#define CFG_SPI_WRITE_TOUT (5*CFG_HZ)
+#define CFG_MAX_DATAFLASH_BANKS 2
+#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
+#define CFG_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* CS3 */
+#define AT91_SPI_CLK 15000000
+#define DATAFLASH_TCSS (0x1a << 16)
+#define DATAFLASH_TCHS (0x1 << 24)
+
+/* NAND flash */
+#define NAND_MAX_CHIPS 1
+#define CFG_MAX_NAND_DEVICE 1
+#define CFG_NAND_BASE 0x40000000
+#define CFG_NAND_DBW_8 1
+
+/* NOR flash - no real flash on this board */
+#define CFG_NO_FLASH 1
+
+/* Ethernet */
+#define CONFIG_DRIVER_DM9000 1
+#define CONFIG_DM9000_BASE 0x30000000
+#define DM9000_IO CONFIG_DM9000_BASE
+#define DM9000_DATA (CONFIG_DM9000_BASE + 4)
+#define CONFIG_DM9000_USE_16BIT 1
+#define CONFIG_NET_RETRY_COUNT 20
+#define CONFIG_RESET_PHY_R 1
+
+/* USB */
+#define CONFIG_USB_OHCI_NEW 1
+#define LITTLEENDIAN 1
+#define CONFIG_DOS_PARTITION 1
+#define CFG_USB_OHCI_CPU_INIT 1
+#define CFG_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9261_UHP_BASE */
+#define CFG_USB_OHCI_SLOT_NAME "at91sam9261"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_STORAGE 1
+
+#define CFG_LOAD_ADDR 0x22000000 /* load address */
+
+#define CFG_MEMTEST_START PHYS_SDRAM
+#define CFG_MEMTEST_END 0x23e00000
+
+#define CFG_USE_DATAFLASH_CS0 1
+#undef CFG_USE_NANDFLASH
+
+#ifdef CFG_USE_DATAFLASH_CS0
+
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
+#define CFG_ENV_IS_IN_DATAFLASH 1
+#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+#define CFG_ENV_OFFSET 0x4200
+#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
+#define CFG_ENV_SIZE 0x4200
+#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock0 " \
+ "mtdparts=at91_nand:-(root) " \
+ "rw rootfstype=jffs2"
+
+#else /* CFG_USE_NANDFLASH */
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CFG_ENV_IS_IN_NAND 1
+#define CFG_ENV_OFFSET 0x60000
+#define CFG_ENV_OFFSET_REDUND 0x80000
+#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock5 " \
+ "mtdparts=at91_nand:128k(bootstrap)ro," \
+ "256k(uboot)ro,128k(env1)ro," \
+ "128k(env2)ro,2M(linux),-(root) " \
+ "rw rootfstype=jffs2"
+
+#endif
+
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
+
+#define CFG_PROMPT "U-Boot> "
+#define CFG_CBSIZE 256
+#define CFG_MAXARGS 16
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP 1
+#define CONFIG_CMDLINE_EDITING 1
+
+#define ROUND(A, B) (((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000)
+#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE (32*1024) /* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * Configuation settings for the AT91SAM9263EK board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91_CPU_NAME "AT91SAM9263"
+#define AT91_MAIN_CLOCK 199919000 /* from 16.367 MHz crystal */
+#define AT91_MASTER_CLOCK 99959500 /* peripheral = main / 2 */
+#define CFG_HZ 1000000 /* 1us resolution */
+
+#define AT91_SLOW_CLOCK 32768 /* slow clock */
+
+#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
+#define CONFIG_AT91SAM9263 1 /* It's an Atmel AT91SAM9263 SoC*/
+#define CONFIG_AT91SAM9263EK 1 /* on an AT91SAM9263EK Board */
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_ATMEL_USART 1
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3 1 /* USART 3 is DBGU */
+
+/* LCD */
+#define CONFIG_LCD 1
+#define LCD_BPP LCD_COLOR8
+#define CONFIG_LCD_LOGO 1
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO 1
+#define CONFIG_LCD_INFO_BELOW_LOGO 1
+#define CFG_WHITE_ON_BLACK 1
+#define CONFIG_ATMEL_LCD 1
+#define CONFIG_ATMEL_LCD_BGR555 1
+#define CFG_CONSOLE_IS_IN_ENV 1
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE 1
+#define CONFIG_BOOTP_BOOTPATH 1
+#define CONFIG_BOOTP_GATEWAY 1
+#define CONFIG_BOOTP_HOSTNAME 1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_CMD_PING 1
+#define CONFIG_CMD_DHCP 1
+#define CONFIG_CMD_NAND 1
+#define CONFIG_CMD_USB 1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM 0x20000000
+#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
+
+/* DataFlash */
+#define CONFIG_HAS_DATAFLASH 1
+#define CFG_SPI_WRITE_TOUT (5*CFG_HZ)
+#define CFG_MAX_DATAFLASH_BANKS 1
+#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
+#define AT91_SPI_CLK 15000000
+#define DATAFLASH_TCSS (0x1a << 16)
+#define DATAFLASH_TCHS (0x1 << 24)
+
+/* NOR flash, if populated */
+#if 1
+#define CFG_NO_FLASH 1
+#else
+#define CFG_FLASH_CFI 1
+#define CFG_FLASH_CFI_DRIVER 1
+#define PHYS_FLASH_1 0x10000000
+#define CFG_FLASH_BASE PHYS_FLASH_1
+#define CFG_MAX_FLASH_SECT 256
+#define CFG_MAX_FLASH_BANKS 1
+#endif
+
+/* NAND flash */
+#define NAND_MAX_CHIPS 1
+#define CFG_MAX_NAND_DEVICE 1
+#define CFG_NAND_BASE 0x40000000
+#define CFG_NAND_DBW_8 1
+
+/* Ethernet */
+#define CONFIG_MACB 1
+#define CONFIG_RMII 1
+#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_RETRY_COUNT 20
+#define CONFIG_RESET_PHY_R 1
+
+/* USB */
+#define CONFIG_USB_OHCI_NEW 1
+#define LITTLEENDIAN 1
+#define CONFIG_DOS_PARTITION 1
+#define CFG_USB_OHCI_CPU_INIT 1
+#define CFG_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */
+#define CFG_USB_OHCI_SLOT_NAME "at91sam9263"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_STORAGE 1
+
+#define CFG_LOAD_ADDR 0x22000000 /* load address */
+
+#define CFG_MEMTEST_START PHYS_SDRAM
+#define CFG_MEMTEST_END 0x23e00000
+
+#define CFG_USE_DATAFLASH 1
+#undef CFG_USE_NANDFLASH
+
+#ifdef CFG_USE_DATAFLASH
+
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
+#define CFG_ENV_IS_IN_DATAFLASH 1
+#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+#define CFG_ENV_OFFSET 0x4200
+#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
+#define CFG_ENV_SIZE 0x4200
+#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock0 " \
+ "mtdparts=at91_nand:-(root) "\
+ "rw rootfstype=jffs2"
+
+#else /* CFG_USE_NANDFLASH */
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CFG_ENV_IS_IN_NAND 1
+#define CFG_ENV_OFFSET 0x60000
+#define CFG_ENV_OFFSET_REDUND 0x80000
+#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock5 " \
+ "mtdparts=at91_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
+ "rw rootfstype=jffs2"
+
+#endif
+
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
+
+#define CFG_PROMPT "U-Boot> "
+#define CFG_CBSIZE 256
+#define CFG_MAXARGS 16
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP 1
+#define CONFIG_CMDLINE_EDITING 1
+
+#define ROUND(A, B) (((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000)
+#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE (32*1024) /* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * Configuation settings for the AT91SAM9RLEK board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91_CPU_NAME "AT91SAM9RL"
+#define AT91_MAIN_CLOCK 200000000 /* from 12.000 MHz crystal */
+#define AT91_MASTER_CLOCK 100000000 /* peripheral = main / 2 */
+#define CFG_HZ 1000000 /* 1us resolution */
+
+#define AT91_SLOW_CLOCK 32768 /* slow clock */
+
+#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
+#define CONFIG_AT91SAM9RL 1 /* It's an Atmel AT91SAM9RL SoC*/
+#define CONFIG_AT91SAM9RLEK 1 /* on an AT91SAM9RLEK Board */
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_ATMEL_USART 1
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3 1 /* USART 3 is DBGU */
+
+/* LCD */
+#define CONFIG_LCD 1
+#define LCD_BPP LCD_COLOR8
+#define CONFIG_LCD_LOGO 1
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO 1
+#define CONFIG_LCD_INFO_BELOW_LOGO 1
+#define CFG_WHITE_ON_BLACK 1
+#define CONFIG_ATMEL_LCD 1
+#define CONFIG_ATMEL_LCD_RGB565 1
+#define CFG_CONSOLE_IS_IN_ENV 1
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_USB
+
+#define CONFIG_CMD_NAND 1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM 0x20000000
+#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
+
+/* DataFlash */
+#define CONFIG_HAS_DATAFLASH 1
+#define CFG_SPI_WRITE_TOUT (5*CFG_HZ)
+#define CFG_MAX_DATAFLASH_BANKS 1
+#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
+#define AT91_SPI_CLK 15000000
+#define DATAFLASH_TCSS (0x1a << 16)
+#define DATAFLASH_TCHS (0x1 << 24)
+
+/* NOR flash - not present */
+#define CFG_NO_FLASH 1
+
+/* NAND flash */
+#define NAND_MAX_CHIPS 1
+#define CFG_MAX_NAND_DEVICE 1
+#define CFG_NAND_BASE 0x40000000
+#define CFG_NAND_DBW_8 1
+
+/* Ethernet - not present */
+
+/* USB - not supported */
+
+#define CFG_LOAD_ADDR 0x22000000 /* load address */
+
+#define CFG_MEMTEST_START PHYS_SDRAM
+#define CFG_MEMTEST_END 0x23e00000
+
+#define CFG_USE_DATAFLASH 1
+#undef CFG_USE_NANDFLASH
+
+#ifdef CFG_USE_DATAFLASH
+
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
+#define CFG_ENV_IS_IN_DATAFLASH 1
+#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+#define CFG_ENV_OFFSET 0x4200
+#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
+#define CFG_ENV_SIZE 0x4200
+#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock0 " \
+ "mtdparts=at91_nand:-(root) "\
+ "rw rootfstype=jffs2"
+
+#else /* CFG_USE_NANDFLASH */
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CFG_ENV_IS_IN_NAND 1
+#define CFG_ENV_OFFSET 0x60000
+#define CFG_ENV_OFFSET_REDUND 0x80000
+#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock5 " \
+ "mtdparts=at91_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
+ "rw rootfstype=jffs2"
+
+#endif
+
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
+
+#define CFG_PROMPT "U-Boot> "
+#define CFG_CBSIZE 256
+#define CFG_MAXARGS 16
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP 1
+#define CONFIG_CMDLINE_EDITING 1
+
+#define ROUND(A, B) (((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000)
+#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE (32*1024) /* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
#ifndef __CONFIG_H
#define __CONFIG_H
+#include <asm/arch/memory-map.h>
+
#define CONFIG_AVR32 1
#define CONFIG_AT32AP 1
#define CONFIG_AT32AP7000 1
#define CONFIG_CMD_FAT
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MMC
+
+#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
#define CONFIG_ATMEL_USART 1
#define CONFIG_MACB 1
#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#define CFG_INTRAM_BASE 0x24000000
-#define CFG_INTRAM_SIZE 0x8000
-
-#define CFG_SDRAM_BASE 0x10000000
-#define CFG_SDRAM_16BIT 1
+#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE
+#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE
+#define CFG_SDRAM_BASE EBI_SDRAM_BASE
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 65536
#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
#define CFG_MALLOC_LEN (256*1024)
-#define CFG_MALLOC_END \
- ({ \
- DECLARE_GLOBAL_DATA_PTR; \
- CFG_SDRAM_BASE + gd->sdram_size; \
- })
-#define CFG_MALLOC_START (CFG_MALLOC_END - CFG_MALLOC_LEN)
-
#define CFG_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
-#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000)
+#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
#define CFG_BOOTPARAMS_LEN (16 * 1024)
/* Other configuration settings that shouldn't have to change all that often */
-#define CFG_PROMPT "Uboot> "
+#define CFG_PROMPT "U-Boot> "
#define CFG_CBSIZE 256
#define CFG_MAXARGS 16
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
#define CFG_LONGHELP 1
-#define CFG_MEMTEST_START CFG_SDRAM_BASE
+#define CFG_MEMTEST_START EBI_SDRAM_BASE
#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x1f00000)
#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
#ifndef __CONFIG_H
#define __CONFIG_H
+#include <asm/arch/memory-map.h>
+
#define CONFIG_AVR32 1
#define CONFIG_AT32AP 1
#define CONFIG_AT32AP7000 1
#define CONFIG_CMD_FAT
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MMC
-#define CONFIG_CMD_REGINFO
#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_SETGETDCR
#undef CONFIG_CMD_XIMG
#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#define CFG_INTRAM_BASE 0x24000000
-#define CFG_INTRAM_SIZE 0x8000
-
-#define CFG_SDRAM_BASE 0x10000000
+#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE
+#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE
+#define CFG_SDRAM_BASE EBI_SDRAM_BASE
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 65536
#define CFG_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
-#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000)
+#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
#define CFG_BOOTPARAMS_LEN (16 * 1024)
/* Other configuration settings that shouldn't have to change all that often */
-#define CFG_PROMPT "Uboot> "
+#define CFG_PROMPT "U-Boot> "
#define CFG_CBSIZE 256
-#define CFG_MAXARGS 8
+#define CFG_MAXARGS 16
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
#define CFG_LONGHELP 1
-#define CFG_MEMTEST_START CFG_SDRAM_BASE
+#define CFG_MEMTEST_START EBI_SDRAM_BASE
#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000)
#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
#ifndef __CONFIG_H
#define __CONFIG_H
+#include <asm/arch/memory-map.h>
+
#define CONFIG_AVR32 1
#define CONFIG_AT32AP 1
#define CONFIG_AT32AP7001 1
#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#define CFG_INTRAM_BASE 0x24000000
-#define CFG_INTRAM_SIZE 0x8000
-
-#define CFG_SDRAM_BASE 0x10000000
+#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE
+#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE
+#define CFG_SDRAM_BASE EBI_SDRAM_BASE
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 65536
#define CFG_MALLOC_LEN (256*1024)
/* Allow 4MB for the kernel run-time image */
-#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000)
+#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
#define CFG_BOOTPARAMS_LEN (16 * 1024)
/* Other configuration settings that shouldn't have to change all that often */
-#define CFG_PROMPT "Uboot> "
+#define CFG_PROMPT "U-Boot> "
#define CFG_CBSIZE 256
#define CFG_MAXARGS 16
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
#define CFG_LONGHELP 1
-#define CFG_MEMTEST_START CFG_SDRAM_BASE
+#define CFG_MEMTEST_START EBI_SDRAM_BASE
#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000)
#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
#ifndef __CONFIG_H
#define __CONFIG_H
+#include <asm/arch/memory-map.h>
+
#define CONFIG_AVR32 1
#define CONFIG_AT32AP 1
#define CONFIG_AT32AP7002 1
#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#define CFG_INTRAM_BASE 0x24000000
-#define CFG_INTRAM_SIZE 0x8000
-
-#define CFG_SDRAM_BASE 0x10000000
-#define CFG_SDRAM_16BIT 1
+#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE
+#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE
+#define CFG_SDRAM_BASE EBI_SDRAM_BASE
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 65536
#define CFG_MALLOC_LEN (256*1024)
/* Allow 2MB for the kernel run-time image */
-#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00200000)
+#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00200000)
#define CFG_BOOTPARAMS_LEN (16 * 1024)
/* Other configuration settings that shouldn't have to change all that often */
-#define CFG_PROMPT "Uboot> "
+#define CFG_PROMPT "U-Boot> "
#define CFG_CBSIZE 256
#define CFG_MAXARGS 16
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
#define CFG_LONGHELP 1
-#define CFG_MEMTEST_START CFG_SDRAM_BASE
+#define CFG_MEMTEST_START EBI_SDRAM_BASE
#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000)
#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
--- /dev/null
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * Configuration settings for the ATSTK1002 CPU daughterboard
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/memory-map.h>
+
+#define CONFIG_AVR32 1
+#define CONFIG_AT32AP 1
+#define CONFIG_AT32AP7000 1
+#define CONFIG_ATSTK1006 1
+#define CONFIG_ATSTK1000 1
+
+#define CONFIG_ATSTK1000_EXT_FLASH 1
+
+/*
+ * Timer clock frequency. We're using the CPU-internal COUNT register
+ * for this, so this is equivalent to the CPU core clock frequency
+ */
+#define CFG_HZ 1000
+
+/*
+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
+ * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
+ * PLL frequency.
+ * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
+ */
+#define CONFIG_PLL 1
+#define CFG_POWER_MANAGER 1
+#define CFG_OSC0_HZ 20000000
+#define CFG_PLL0_DIV 1
+#define CFG_PLL0_MUL 7
+#define CFG_PLL0_SUPPRESS_CYCLES 16
+/*
+ * Set the CPU running at:
+ * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
+ */
+#define CFG_CLKDIV_CPU 0
+/*
+ * Set the HSB running at:
+ * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
+ */
+#define CFG_CLKDIV_HSB 1
+/*
+ * Set the PBA running at:
+ * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
+ */
+#define CFG_CLKDIV_PBA 2
+/*
+ * Set the PBB running at:
+ * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
+ */
+#define CFG_CLKDIV_PBB 1
+
+/*
+ * The PLLOPT register controls the PLL like this:
+ * icp = PLLOPT<2>
+ * ivco = PLLOPT<1:0>
+ *
+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
+ */
+#define CFG_PLL0_OPT 0x04
+
+#undef CONFIG_USART0
+#define CONFIG_USART1 1
+#undef CONFIG_USART2
+#undef CONFIG_USART3
+
+/* User serviceable stuff */
+#define CONFIG_DOS_PARTITION 1
+
+#define CONFIG_CMDLINE_TAG 1
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+#define CONFIG_STACKSIZE (2048)
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTARGS \
+ "console=ttyS0 root=mtd3 fbmem=2400k"
+
+#define CONFIG_BOOTCOMMAND \
+ "fsload; bootm $(fileaddr)"
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY 1
+#define CONFIG_AUTOBOOT 1
+#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_DELAY_STR "d"
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
+/*
+ * After booting the board for the first time, new ethernet addresses
+ * should be generated and assigned to the environment variables
+ * "ethaddr" and "eth1addr". This is normally done during production.
+ */
+#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
+#define CONFIG_NET_MULTI 1
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MMC
+
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+
+#define CONFIG_ATMEL_USART 1
+#define CONFIG_MACB 1
+#define CONFIG_PIO2 1
+#define CFG_NR_PIOS 5
+#define CFG_HSDRAMC 1
+#define CONFIG_MMC 1
+
+#define CFG_DCACHE_LINESZ 32
+#define CFG_ICACHE_LINESZ 32
+
+#define CONFIG_NR_DRAM_BANKS 1
+
+/* External flash on STK1000 */
+#if 0
+#define CFG_FLASH_CFI 1
+#define CFG_FLASH_CFI_DRIVER 1
+#endif
+
+#define CFG_FLASH_BASE 0x00000000
+#define CFG_FLASH_SIZE 0x800000
+#define CFG_MAX_FLASH_BANKS 1
+#define CFG_MAX_FLASH_SECT 135
+
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+
+#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE
+#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE
+#define CFG_SDRAM_BASE EBI_SDRAM_BASE
+
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 65536
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+
+#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+
+#define CFG_MALLOC_LEN (256*1024)
+#define CFG_DMA_ALLOC_LEN (16384)
+
+/* Allow 4MB for the kernel run-time image */
+#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
+#define CFG_BOOTPARAMS_LEN (16 * 1024)
+
+/* Other configuration settings that shouldn't have to change all that often */
+#define CFG_PROMPT "U-Boot> "
+#define CFG_CBSIZE 256
+#define CFG_MAXARGS 16
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP 1
+
+#define CFG_MEMTEST_START EBI_SDRAM_BASE
+#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x3f00000)
+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+
+#endif /* __CONFIG_H */
#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
#define CONFIG_CM5200 1 /* ... on CM5200 platform */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Supported commands
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
#define CONFIG_HARD_SPI 1
#define CONFIG_MXC_SPI 1
-#define CONFIG_MXC_SPI_IFACE 1
+#define CONFIG_DEFAULT_SPI_BUS 1
+#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 | SPI_CS_HIGH)
#define CONFIG_RTC_MC13783 1
#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
#define CONFIG_MPC5200 1 /* More exactly a MPC5200 */
#define CONFIG_MOTIONPRO 1 /* ... on Promess Motion-PRO board */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/*
* BOOTP options
#define CONFIG_MPC7448HPC2
#define CONFIG_74xx
-#define CONFIG_750FX /* this option to enable init of extended BATs */
+#define CONFIG_HIGH_BATS /* High BATs supported */
#define CONFIG_ALTIVEC /* undef to disable */
#define CFG_BOARD_NAME "MPC7448 HPC II"
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/*
* Command line configuration.
#define CONFIG_HARD_SPI 1
#define CONFIG_MXC_SPI 1
-#define CONFIG_MXC_SPI_IFACE 1 /* Default SPI interface number */
+#define CONFIG_DEFAULT_SPI_BUS 1
+#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 | SPI_CS_HIGH)
#define CONFIG_RTC_MC13783 1
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
#if defined (CONFIG_P3M750)
#define CONFIG_750FX /* 750GL/GX/FX */
+#define CONFIG_HIGH_BATS /* High BATs supported */
#define CFG_BOARD_NAME "P3M750"
#define CFG_BUS_HZ 100000000
#define CFG_BUS_CLK CFG_BUS_HZ
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/*
* Serial console configuration
*/
#define CFG_HID2 HID2_HBE
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* DDR @ 0x00000000 */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
#define CONFIG_CPM2 1 /* has CPM2 */
#define CONFIG_SBC8560 1 /* configuration for SBC8560 board */
+#define CONFIG_MPC8560 1
/* XXX flagging this as something I might want to delete */
#define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific */
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256kB for Mon*/
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+#define CFG_MALLOC_LEN (256 * 1024) /* Reserved for malloc */
/* Serial Port */
#define CFG_EEPROM_PAGE_WRITE_ENABLE /* necessary for the LM75 chip */
#define CFG_EEPROM_PAGE_WRITE_BITS 4
-/* RapidIO MMU */
-#define CFG_RIO_MEM_BASE 0xc0000000 /* base address */
-#define CFG_RIO_MEM_PHYS CFG_RIO_MEM_BASE
-#define CFG_RIO_MEM_SIZE 0x20000000 /* 128M */
-
/*
* General PCI
* Memory space is mapped 1-1.
*/
#define CFG_PCI_PHYS 0x80000000 /* 1G PCI TLB */
-
+/* PCI is clocked by the external source at 33 MHz */
+#define CONFIG_PCI_CLK_FREQ 33000000
#define CFG_PCI1_MEM_BASE 0x80000000
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
#if defined(CONFIG_PCI)
#define CONFIG_PCI_PNP /* do pci plug-and-play */
-
-#define CONFIG_EEPRO100
-#undef CONFIG_TULIP
-
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
-
+#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#endif /* CONFIG_PCI */
"tftp ${fdt_addr_r} ${fdt_file}; " \
"run nfsargs addip addcons;" \
"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
- "fdt_file=$hostname/socrates.dtb\0" \
+ "fdt_file=$hostname/socrates.dtb\0" \
"fdt_addr_r=B00000\0" \
"fdt_addr=FC1E0000\0" \
- "rootpath=/opt/eldk/ppc_85xx\0" \
+ "rootpath=/opt/eldk/ppc_85xxDP\0" \
"kernel_addr=FC000000\0" \
"kernel_addr_r=200000\0" \
"ramdisk_addr=FC200000\0" \
#define CONFIG_DOS_PARTITION 1
#define CONFIG_USB_STORAGE 1
+/* FPGA and NAND */
+#define CFG_FPGA_BASE 0xc0000000
+#define CFG_BR3_PRELIM 0xc0001881 /* UPMA, 32-bit */
+#define CFG_OR3_PRELIM 0xfff00000 /* 1 MB */
+
+#define CFG_NAND_BASE (CFG_FPGA_BASE + 0x70)
+#define CFG_MAX_NAND_DEVICE 1
+#define NAND_MAX_CHIPS 1
+#define CONFIG_CMD_NAND
+
#endif /* __CONFIG_H */
#define CONFIG_MPC8220 1
#define CONFIG_SORCERY 1 /* Sorcery board */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* Input clock running at 60Mhz, read Hid1 for the CPU multiplier to
determine the CPU speed. */
#define CFG_MPC8220_CLKIN 60000000 /* ... running at 60MHz */
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
#define CONFIG_CPM2 1 /* has CPM2 */
#define CONFIG_STXGP3 1 /* Silicon Tx GPPP board specific*/
+#define CONFIG_MPC8560 1
#undef CONFIG_PCI /* pci ethernet support */
#define CONFIG_TSEC_ENET /* tsec ethernet support*/
#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
#define CONFIG_CPM2 1 /* has CPM2 */
#define CONFIG_STXSSA 1 /* Silicon Tx GPPP SSA board specific*/
+#define CONFIG_MPC8560 1
#define CONFIG_PCI /* PCI ethernet support */
#define CONFIG_TSEC_ENET /* tsec ethernet support*/
#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
u_char vl_bpix; /* Bits per pixel, 0 = 1 */
} vidinfo_t;
-#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 */
+
+#elif defined(CONFIG_ATMEL_LCD)
+
+typedef struct vidinfo {
+ u_long vl_col; /* Number of columns (i.e. 640) */
+ u_long vl_row; /* Number of rows (i.e. 480) */
+ u_long vl_clk; /* pixel clock in ps */
+
+ /* LCD configuration register */
+ u_long vl_sync; /* Horizontal / vertical sync */
+ u_long vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
+ u_long vl_tft; /* 0 = passive, 1 = TFT */
+
+ /* Horizontal control register. */
+ u_long vl_hsync_len; /* Length of horizontal sync */
+ u_long vl_left_margin; /* Time from sync to picture */
+ u_long vl_right_margin; /* Time from picture to sync */
+
+ /* Vertical control register. */
+ u_long vl_vsync_len; /* Length of vertical sync */
+ u_long vl_upper_margin; /* Time from sync to picture */
+ u_long vl_lower_margin; /* Time from picture to sync */
+
+ u_long mmio; /* Memory mapped registers */
+} vidinfo_t;
+
+extern vidinfo_t panel_info;
+
+#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 or CONFIG_ATMEL_LCD */
/* Video functions */
#include <linux/mtd/nand.h>
struct fsl_upm {
- const u32 *array;
void __iomem *mdr;
void __iomem *mxmr;
void __iomem *mar;
uint32_t useecc;
uint32_t eccbytes;
uint32_t oobfree[8][2];
- uint32_t eccpos[32];
+ uint32_t eccpos[48];
};
#endif /* __MTD_ABI_H__ */
extern struct nand_flash_dev nand_flash_ids[];
extern struct nand_manufacturers nand_manuf_ids[];
+#ifndef NAND_MAX_CHIPS
+#define NAND_MAX_CHIPS 8
+#endif
+
/**
* struct nand_bbt_descr - bad block table descriptor
* @options: options for this descriptor
void logbuff_init_ptrs (void);
void logbuff_log(char *msg);
void logbuff_reset (void);
+unsigned long logbuffer_base (void);
#endif /* CONFIG_LOGBUFFER */
#define __MPC83XX_H__
#include <config.h>
+#include <asm/fsl_lbc.h>
#if defined(CONFIG_E300)
#include <asm/e300.h>
#endif
#define CSCONFIG_EN 0x80000000
#define CSCONFIG_AP 0x00800000
#define CSCONFIG_ODT_WR_ACS 0x00010000
+#define CSCONFIG_BANK_BIT_3 0x00004000
#define CSCONFIG_ROW_BIT 0x00000700
#define CSCONFIG_ROW_BIT_12 0x00000000
#define CSCONFIG_ROW_BIT_13 0x00000100
#define ECC_ERROR_MAN_SBEC (0xff000000>>24) /* Single Bit Error Counter 0..255 */
#define ECC_ERROR_MAN_SBEC_SHIFT 0
-/* BR - Base Registers
- */
-#define BR0 0x5000 /* Register offset to immr */
-#define BR1 0x5008
-#define BR2 0x5010
-#define BR3 0x5018
-#define BR4 0x5020
-#define BR5 0x5028
-#define BR6 0x5030
-#define BR7 0x5038
-
-#define BR_BA 0xFFFF8000
-#define BR_BA_SHIFT 15
-#define BR_PS 0x00001800
-#define BR_PS_SHIFT 11
-#define BR_PS_8 0x00000800 /* Port Size 8 bit */
-#define BR_PS_16 0x00001000 /* Port Size 16 bit */
-#define BR_PS_32 0x00001800 /* Port Size 32 bit */
-#define BR_DECC 0x00000600
-#define BR_DECC_SHIFT 9
-#define BR_DECC_OFF 0x00000000
-#define BR_DECC_CHK 0x00000200
-#define BR_DECC_CHK_GEN 0x00000400
-#define BR_WP 0x00000100
-#define BR_WP_SHIFT 8
-#define BR_MSEL 0x000000E0
-#define BR_MSEL_SHIFT 5
-#define BR_MS_GPCM 0x00000000 /* GPCM */
-#define BR_MS_FCM 0x00000020 /* FCM */
-#define BR_MS_SDRAM 0x00000060 /* SDRAM */
-#define BR_MS_UPMA 0x00000080 /* UPMA */
-#define BR_MS_UPMB 0x000000A0 /* UPMB */
-#define BR_MS_UPMC 0x000000C0 /* UPMC */
-#if !defined(CONFIG_MPC834X)
-#define BR_ATOM 0x0000000C
-#define BR_ATOM_SHIFT 2
-#endif
-#define BR_V 0x00000001
-#define BR_V_SHIFT 0
-
-#if defined(CONFIG_MPC834X)
-#define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_V)
-#else
-#define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_ATOM | BR_V)
-#endif
-
-/* OR - Option Registers
- */
-#define OR0 0x5004 /* Register offset to immr */
-#define OR1 0x500C
-#define OR2 0x5014
-#define OR3 0x501C
-#define OR4 0x5024
-#define OR5 0x502C
-#define OR6 0x5034
-#define OR7 0x503C
-
-#define OR_GPCM_AM 0xFFFF8000
-#define OR_GPCM_AM_SHIFT 15
-#define OR_GPCM_BCTLD 0x00001000
-#define OR_GPCM_BCTLD_SHIFT 12
-#define OR_GPCM_CSNT 0x00000800
-#define OR_GPCM_CSNT_SHIFT 11
-#define OR_GPCM_ACS 0x00000600
-#define OR_GPCM_ACS_SHIFT 9
-#define OR_GPCM_ACS_0b10 0x00000400
-#define OR_GPCM_ACS_0b11 0x00000600
-#define OR_GPCM_XACS 0x00000100
-#define OR_GPCM_XACS_SHIFT 8
-#define OR_GPCM_SCY 0x000000F0
-#define OR_GPCM_SCY_SHIFT 4
-#define OR_GPCM_SCY_1 0x00000010
-#define OR_GPCM_SCY_2 0x00000020
-#define OR_GPCM_SCY_3 0x00000030
-#define OR_GPCM_SCY_4 0x00000040
-#define OR_GPCM_SCY_5 0x00000050
-#define OR_GPCM_SCY_6 0x00000060
-#define OR_GPCM_SCY_7 0x00000070
-#define OR_GPCM_SCY_8 0x00000080
-#define OR_GPCM_SCY_9 0x00000090
-#define OR_GPCM_SCY_10 0x000000a0
-#define OR_GPCM_SCY_11 0x000000b0
-#define OR_GPCM_SCY_12 0x000000c0
-#define OR_GPCM_SCY_13 0x000000d0
-#define OR_GPCM_SCY_14 0x000000e0
-#define OR_GPCM_SCY_15 0x000000f0
-#define OR_GPCM_SETA 0x00000008
-#define OR_GPCM_SETA_SHIFT 3
-#define OR_GPCM_TRLX 0x00000004
-#define OR_GPCM_TRLX_SHIFT 2
-#define OR_GPCM_EHTR 0x00000002
-#define OR_GPCM_EHTR_SHIFT 1
-#define OR_GPCM_EAD 0x00000001
-#define OR_GPCM_EAD_SHIFT 0
-
-#define OR_FCM_AM 0xFFFF8000
-#define OR_FCM_AM_SHIFT 15
-#define OR_FCM_BCTLD 0x00001000
-#define OR_FCM_BCTLD_SHIFT 12
-#define OR_FCM_PGS 0x00000400
-#define OR_FCM_PGS_SHIFT 10
-#define OR_FCM_CSCT 0x00000200
-#define OR_FCM_CSCT_SHIFT 9
-#define OR_FCM_CST 0x00000100
-#define OR_FCM_CST_SHIFT 8
-#define OR_FCM_CHT 0x00000080
-#define OR_FCM_CHT_SHIFT 7
-#define OR_FCM_SCY 0x00000070
-#define OR_FCM_SCY_SHIFT 4
-#define OR_FCM_SCY_1 0x00000010
-#define OR_FCM_SCY_2 0x00000020
-#define OR_FCM_SCY_3 0x00000030
-#define OR_FCM_SCY_4 0x00000040
-#define OR_FCM_SCY_5 0x00000050
-#define OR_FCM_SCY_6 0x00000060
-#define OR_FCM_SCY_7 0x00000070
-#define OR_FCM_RST 0x00000008
-#define OR_FCM_RST_SHIFT 3
-#define OR_FCM_TRLX 0x00000004
-#define OR_FCM_TRLX_SHIFT 2
-#define OR_FCM_EHTR 0x00000002
-#define OR_FCM_EHTR_SHIFT 1
-
-#define OR_UPM_AM 0xFFFF8000
-#define OR_UPM_AM_SHIFT 15
-#define OR_UPM_XAM 0x00006000
-#define OR_UPM_XAM_SHIFT 13
-#define OR_UPM_BCTLD 0x00001000
-#define OR_UPM_BCTLD_SHIFT 12
-#define OR_UPM_BI 0x00000100
-#define OR_UPM_BI_SHIFT 8
-#define OR_UPM_TRLX 0x00000004
-#define OR_UPM_TRLX_SHIFT 2
-#define OR_UPM_EHTR 0x00000002
-#define OR_UPM_EHTR_SHIFT 1
-#define OR_UPM_EAD 0x00000001
-#define OR_UPM_EAD_SHIFT 0
-
-#define OR_SDRAM_AM 0xFFFF8000
-#define OR_SDRAM_AM_SHIFT 15
-#define OR_SDRAM_XAM 0x00006000
-#define OR_SDRAM_XAM_SHIFT 13
-#define OR_SDRAM_COLS 0x00001C00
-#define OR_SDRAM_COLS_SHIFT 10
-#define OR_SDRAM_ROWS 0x000001C0
-#define OR_SDRAM_ROWS_SHIFT 6
-#define OR_SDRAM_PMSEL 0x00000020
-#define OR_SDRAM_PMSEL_SHIFT 5
-#define OR_SDRAM_EAD 0x00000001
-#define OR_SDRAM_EAD_SHIFT 0
-
-#define OR_AM_32KB 0xFFFF8000
-#define OR_AM_64KB 0xFFFF0000
-#define OR_AM_128KB 0xFFFE0000
-#define OR_AM_256KB 0xFFFC0000
-#define OR_AM_512KB 0xFFF80000
-#define OR_AM_1MB 0xFFF00000
-#define OR_AM_2MB 0xFFE00000
-#define OR_AM_4MB 0xFFC00000
-#define OR_AM_8MB 0xFF800000
-#define OR_AM_16MB 0xFF000000
-#define OR_AM_32MB 0xFE000000
-#define OR_AM_64MB 0xFC000000
-#define OR_AM_128MB 0xF8000000
-#define OR_AM_256MB 0xF0000000
-#define OR_AM_512MB 0xE0000000
-#define OR_AM_1GB 0xC0000000
-#define OR_AM_2GB 0x80000000
-#define OR_AM_4GB 0x00000000
-
-#define LBLAWAR_EN 0x80000000
-#define LBLAWAR_4KB 0x0000000B
-#define LBLAWAR_8KB 0x0000000C
-#define LBLAWAR_16KB 0x0000000D
-#define LBLAWAR_32KB 0x0000000E
-#define LBLAWAR_64KB 0x0000000F
-#define LBLAWAR_128KB 0x00000010
-#define LBLAWAR_256KB 0x00000011
-#define LBLAWAR_512KB 0x00000012
-#define LBLAWAR_1MB 0x00000013
-#define LBLAWAR_2MB 0x00000014
-#define LBLAWAR_4MB 0x00000015
-#define LBLAWAR_8MB 0x00000016
-#define LBLAWAR_16MB 0x00000017
-#define LBLAWAR_32MB 0x00000018
-#define LBLAWAR_64MB 0x00000019
-#define LBLAWAR_128MB 0x0000001A
-#define LBLAWAR_256MB 0x0000001B
-#define LBLAWAR_512MB 0x0000001C
-#define LBLAWAR_1GB 0x0000001D
-#define LBLAWAR_2GB 0x0000001E
-
-/* LBCR - Local Bus Configuration Register
- */
-#define LBCR_LDIS 0x80000000
-#define LBCR_LDIS_SHIFT 31
-#define LBCR_BCTLC 0x00C00000
-#define LBCR_BCTLC_SHIFT 22
-#define LBCR_LPBSE 0x00020000
-#define LBCR_LPBSE_SHIFT 17
-#define LBCR_EPAR 0x00010000
-#define LBCR_EPAR_SHIFT 16
-#define LBCR_BMT 0x0000FF00
-#define LBCR_BMT_SHIFT 8
-
-/* LCRR - Clock Ratio Register
- */
-#define LCRR_DBYP 0x80000000
-#define LCRR_DBYP_SHIFT 31
-#define LCRR_BUFCMDC 0x30000000
-#define LCRR_BUFCMDC_SHIFT 28
-#define LCRR_BUFCMDC_1 0x10000000
-#define LCRR_BUFCMDC_2 0x20000000
-#define LCRR_BUFCMDC_3 0x30000000
-#define LCRR_BUFCMDC_4 0x00000000
-#define LCRR_ECL 0x03000000
-#define LCRR_ECL_SHIFT 24
-#define LCRR_ECL_4 0x00000000
-#define LCRR_ECL_5 0x01000000
-#define LCRR_ECL_6 0x02000000
-#define LCRR_ECL_7 0x03000000
-#define LCRR_EADC 0x00030000
-#define LCRR_EADC_SHIFT 16
-#define LCRR_EADC_1 0x00010000
-#define LCRR_EADC_2 0x00020000
-#define LCRR_EADC_3 0x00030000
-#define LCRR_EADC_4 0x00000000
-#define LCRR_CLKDIV 0x0000000F
-#define LCRR_CLKDIV_SHIFT 0
-#define LCRR_CLKDIV_2 0x00000002
-#define LCRR_CLKDIV_4 0x00000004
-#define LCRR_CLKDIV_8 0x00000008
-
/* DMAMR - DMA Mode Register
*/
#define DMA_CHANNEL_START 0x00000001 /* Bit - DMAMRn CS */
#ifndef __MPC85xx_H__
#define __MPC85xx_H__
+#include <asm/fsl_lbc.h>
+
/* define for common ppc_asm.tmpl */
#define EXC_OFF_SYS_RESET 0x100 /* System reset */
#define _START_OFFSET 0
#define SCCR_DFBRG10 0x00000002 /* BRGCLK division by 64 */
#define SCCR_DFBRG11 0x00000003 /* BRGCLK division by 256 */
-/*
- * Local Bus Controller - memory controller registers
- */
-#define BRx_V 0x00000001 /* Bank Valid */
-#define BRx_MS_GPCM 0x00000000 /* G.P.C.M. Machine Select */
-#define BRx_MS_SDRAM 0x00000000 /* SDRAM Machine Select */
-#define BRx_MS_UPMA 0x00000080 /* U.P.M.A Machine Select */
-#define BRx_MS_UPMB 0x000000a0 /* U.P.M.B Machine Select */
-#define BRx_MS_UPMC 0x000000c0 /* U.P.M.C Machine Select */
-#define BRx_PS_8 0x00000800 /* 8 bit port size */
-#define BRx_PS_32 0x00001800 /* 32 bit port size */
-#define BRx_BA_MSK 0xffff8000 /* Base Address Mask */
-
-#define ORxG_EAD 0x00000001 /* External addr latch delay */
-#define ORxG_EHTR 0x00000002 /* Extended hold time on read */
-#define ORxG_TRLX 0x00000004 /* Timing relaxed */
-#define ORxG_SETA 0x00000008 /* External address termination */
-#define ORxG_SCY_10_CLK 0x000000a0 /* 10 clock cycles wait states */
-#define ORxG_SCY_15_CLK 0x000000f0 /* 15 clock cycles wait states */
-#define ORxG_XACS 0x00000100 /* Extra addr to CS setup */
-#define ORxG_ACS_DIV2 0x00000600 /* CS is output 1/2 a clock later*/
-#define ORxG_CSNT 0x00000800 /* Chip Select Negation Time */
-
-#define ORxU_BI 0x00000100 /* Burst Inhibit */
-#define ORxU_AM_MSK 0xffff8000 /* Address Mask Mask */
-
-#define MxMR_OP_NORM 0x00000000 /* Normal Operation */
-#define MxMR_DSx_2_CYCL 0x00400000 /* 2 cycle Disable Period */
-#define MxMR_OP_WARR 0x10000000 /* Write to Array */
-#define MxMR_BSEL 0x80000000 /* Bus Select */
-
-/* helpers to convert values into an OR address mask (GPCM mode) */
-#define P2SZ_TO_AM(s) ((~((s) - 1)) & 0xffff8000) /* must be pow of 2 */
-#define MEG_TO_AM(m) P2SZ_TO_AM((m) << 20)
-
#endif /* __MPC85xx_H__ */
#ifndef __MPC86xx_H__
#define __MPC86xx_H__
+#include <asm/fsl_lbc.h>
+
#define EXC_OFF_SYS_RESET 0x0100 /* System reset offset */
#define _START_OFFSET EXC_OFF_SYS_RESET
#ifndef __UBOOT_ONENAND_H
#define __UBOOT_ONENAND_H
+#include <linux/types.h>
+
struct kvec {
void *iov_base;
size_t iov_len;
typedef int spinlock_t;
typedef int wait_queue_head_t;
+struct mtd_info;
+struct erase_info;
+
/* Functions */
extern void onenand_init(void);
extern int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
#define SPI_MODE_1 (0|SPI_CPHA)
#define SPI_MODE_2 (SPI_CPOL|0)
#define SPI_MODE_3 (SPI_CPOL|SPI_CPHA)
-#define SPI_CS_HIGH 0x04 /* chipselect active high? */
+#define SPI_CS_HIGH 0x04 /* CS active high */
#define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */
#define SPI_3WIRE 0x10 /* SI/SO signals shared */
#define SPI_LOOP 0x20 /* loopback mode */
-/*
- * The function call pointer type used to drive the chip select.
- */
-typedef void (*spi_chipsel_type)(int cs);
+/* SPI transfer flags */
+#define SPI_XFER_BEGIN 0x01 /* Assert CS before transfer */
+#define SPI_XFER_END 0x02 /* Deassert CS after transfer */
+/*-----------------------------------------------------------------------
+ * Representation of a SPI slave, i.e. what we're communicating with.
+ *
+ * Drivers are expected to extend this with controller-specific data.
+ *
+ * bus: ID of the bus that the slave is attached to.
+ * cs: ID of the chip select connected to the slave.
+ */
+struct spi_slave {
+ unsigned int bus;
+ unsigned int cs;
+};
/*-----------------------------------------------------------------------
* Initialization, must be called once on start up.
+ *
+ * TODO: I don't think we really need this.
*/
void spi_init(void);
+/*-----------------------------------------------------------------------
+ * Set up communications parameters for a SPI slave.
+ *
+ * This must be called once for each slave. Note that this function
+ * usually doesn't touch any actual hardware, it only initializes the
+ * contents of spi_slave so that the hardware can be easily
+ * initialized later.
+ *
+ * bus: Bus ID of the slave chip.
+ * cs: Chip select ID of the slave chip on the specified bus.
+ * max_hz: Maximum SCK rate in Hz.
+ * mode: Clock polarity, clock phase and other parameters.
+ *
+ * Returns: A spi_slave reference that can be used in subsequent SPI
+ * calls, or NULL if one or more of the parameters are not supported.
+ */
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode);
+
+/*-----------------------------------------------------------------------
+ * Free any memory associated with a SPI slave.
+ *
+ * slave: The SPI slave
+ */
+void spi_free_slave(struct spi_slave *slave);
+
+/*-----------------------------------------------------------------------
+ * Claim the bus and prepare it for communication with a given slave.
+ *
+ * This must be called before doing any transfers with a SPI slave. It
+ * will enable and initialize any SPI hardware as necessary, and make
+ * sure that the SCK line is in the correct idle state. It is not
+ * allowed to claim the same bus for several slaves without releasing
+ * the bus in between.
+ *
+ * slave: The SPI slave
+ *
+ * Returns: 0 if the bus was claimed successfully, or a negative value
+ * if it wasn't.
+ */
+int spi_claim_bus(struct spi_slave *slave);
+
+/*-----------------------------------------------------------------------
+ * Release the SPI bus
+ *
+ * This must be called once for every call to spi_claim_bus() after
+ * all transfers have finished. It may disable any SPI hardware as
+ * appropriate.
+ *
+ * slave: The SPI slave
+ */
+void spi_release_bus(struct spi_slave *slave);
/*-----------------------------------------------------------------------
* SPI transfer
* input data overwrites the output data (since both are buffered by
* temporary variables, this is OK).
*
- * If the chipsel() function is not NULL, it is called with a parameter
- * of '1' (chip select active) at the start of the transfer and again with
- * a parameter of '0' at the end of the transfer.
- *
- * If the chipsel() function _is_ NULL, it the responsibility of the
- * caller to make the appropriate chip select active before calling
- * spi_xfer() and making it inactive after spi_xfer() returns.
- *
* spi_xfer() interface:
- * chipsel: Routine to call to set/clear the chip select:
- * if chipsel is NULL, it is not used.
- * if(cs), make the chip select active (typically '0').
- * if(!cs), make the chip select inactive (typically '1').
- * dout: Pointer to a string of bits to send out. The bits are
- * held in a byte array and are sent MSB first.
- * din: Pointer to a string of bits that will be filled in.
- * bitlen: How many bits to write and read.
+ * slave: The SPI slave which will be sending/receiving the data.
+ * bitlen: How many bits to write and read.
+ * dout: Pointer to a string of bits to send out. The bits are
+ * held in a byte array and are sent MSB first.
+ * din: Pointer to a string of bits that will be filled in.
+ * flags: A bitwise combination of SPI_XFER_* flags.
*
* Returns: 0 on success, not 0 on failure
*/
-int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din);
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
+ void *din, unsigned long flags);
+
+/*-----------------------------------------------------------------------
+ * Determine if a SPI chipselect is valid.
+ * This function is provided by the board if the low-level SPI driver
+ * needs it to determine if a given chipselect is actually valid.
+ *
+ * Returns: 1 if bus:cs identifies a valid chip on this board, 0
+ * otherwise.
+ */
+int spi_cs_is_valid(unsigned int bus, unsigned int cs);
+
+/*-----------------------------------------------------------------------
+ * Activate a SPI chipselect.
+ * This function is provided by the board code when using a driver
+ * that can't control its chipselects automatically (e.g.
+ * common/soft_spi.c). When called, it should activate the chip select
+ * to the device identified by "slave".
+ */
+void spi_cs_activate(struct spi_slave *slave);
+
+/*-----------------------------------------------------------------------
+ * Deactivate a SPI chipselect.
+ * This function is provided by the board code when using a driver
+ * that can't control its chipselects automatically (e.g.
+ * common/soft_spi.c). When called, it should deactivate the chip
+ * select to the device identified by "slave".
+ */
+void spi_cs_deactivate(struct spi_slave *slave);
+
+/*-----------------------------------------------------------------------
+ * Write 8 bits, then read 8 bits.
+ * slave: The SPI slave we're communicating with
+ * byte: Byte to be written
+ *
+ * Returns: The value that was read, or a negative value on error.
+ *
+ * TODO: This function probably shouldn't be inlined.
+ */
+static inline int spi_w8r8(struct spi_slave *slave, unsigned char byte)
+{
+ unsigned char dout[2];
+ unsigned char din[2];
+ int ret;
+
+ dout[0] = byte;
+ dout[1] = 0;
-int spi_select(unsigned int bus, unsigned int dev, unsigned long mode);
+ ret = spi_xfer(slave, 16, dout, din, SPI_XFER_BEGIN | SPI_XFER_END);
+ return ret < 0 ? ret : din[1];
+}
#endif /* _SPI_H_ */
--- /dev/null
+/*
+ * Interface to SPI flash
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _SPI_FLASH_H_
+#define _SPI_FLASH_H_
+
+#include <spi.h>
+
+struct spi_flash_region {
+ unsigned int count;
+ unsigned int size;
+};
+
+struct spi_flash {
+ struct spi_slave *spi;
+
+ const char *name;
+
+ u32 size;
+
+ int (*read)(struct spi_flash *flash, u32 offset,
+ size_t len, void *buf);
+ int (*write)(struct spi_flash *flash, u32 offset,
+ size_t len, const void *buf);
+ int (*erase)(struct spi_flash *flash, u32 offset,
+ size_t len);
+};
+
+struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int spi_mode);
+void spi_flash_free(struct spi_flash *flash);
+
+static inline int spi_flash_read(struct spi_flash *flash, u32 offset,
+ size_t len, void *buf)
+{
+ return flash->read(flash, offset, len, buf);
+}
+
+static inline int spi_flash_write(struct spi_flash *flash, u32 offset,
+ size_t len, const void *buf)
+{
+ return flash->write(flash, offset, len, buf);
+}
+
+static inline int spi_flash_erase(struct spi_flash *flash, u32 offset,
+ size_t len)
+{
+ return flash->erase(flash, offset, len);
+}
+
+#endif /* _SPI_FLASH_H_ */
#include <version.h>
#include <net.h>
#include <serial.h>
+#include <nand.h>
+#include <onenand_uboot.h>
#ifdef CONFIG_DRIVER_SMC91111
#include "../drivers/net/smc91111.h"
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_CMD_NAND)
-void nand_init (void);
-#endif
-
-#if defined(CONFIG_CMD_ONENAND)
-void onenand_init(void);
-#endif
-
ulong monitor_flash_len;
#ifdef CONFIG_HAS_DATAFLASH
return ((void *) old);
}
+char *strmhz(char *buf, long hz)
+{
+ long l, n;
+ long m;
+
+ n = hz / 1000000L;
+ l = sprintf (buf, "%ld", n);
+ m = (hz % 1000000L) / 1000L;
+ if (m != 0)
+ sprintf (buf + l, ".%03ld", m);
+ return (buf);
+}
+
+
/************************************************************************
* Coloured LED functionality
************************************************************************
{
init_fnc_t **init_fnc_ptr;
char *s;
-#ifndef CFG_NO_FLASH
+#if !defined(CFG_NO_FLASH) || defined (CONFIG_VFD) || defined(CONFIG_LCD)
ulong size;
#endif
#if defined(CONFIG_VFD) || defined(CONFIG_LCD)
#endif /* CONFIG_VFD */
#ifdef CONFIG_LCD
-# ifndef PAGE_SIZE
-# define PAGE_SIZE 4096
-# endif
- /*
- * reserve memory for LCD display (always full pages)
- */
- /* bss_end is defined in the board-specific linker script */
- addr = (_bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
- size = lcd_setmem (addr);
- gd->fb_base = addr;
+ /* board init may have inited fb_base */
+ if (!gd->fb_base) {
+# ifndef PAGE_SIZE
+# define PAGE_SIZE 4096
+# endif
+ /*
+ * reserve memory for LCD display (always full pages)
+ */
+ /* bss_end is defined in the board-specific linker script */
+ addr = (_bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
+ size = lcd_setmem (addr);
+ gd->fb_base = addr;
+ }
#endif /* CONFIG_LCD */
/* armboot_start is defined in the board-specific linker script */
*
* Returns b in r12
*/
- .text
+ .section .text.memset, "ax", @progbits
.global memset
.type memset, @function
#ifndef USE_HOSTCC
#include <common.h>
+#else
+#include <string.h>
#endif /* USE_HOSTCC */
#include <watchdog.h>
#include <linux/types.h>
#ifndef USE_HOSTCC
#include <common.h>
+#else
+#include <string.h>
#endif /* USE_HOSTCC */
#include <watchdog.h>
#include <linux/string.h>
#include <version.h>
#include <net.h>
#include <environment.h>
+#include <nand.h>
+#include <spi.h>
DECLARE_GLOBAL_DATA_PTR;
}
#endif
+#ifdef CONFIG_CMD_NAND
+ puts ("NAND: ");
+ nand_init (); /* go init the NAND */
+#endif
+
+#ifdef CONFIG_CMD_SPI
+ puts ("SPI: ");
+ spi_init (); /* go init the SPI */
+ puts ("ready\n");
+#endif
+
#if defined(CONFIG_MISC_INIT_R)
/* miscellaneous platform dependent initialisations */
misc_init_r ();
int write_bat (ppc_bat_t bat, unsigned long upper, unsigned long lower)
{
switch (bat) {
+ case DBAT0:
+ mtspr (DBAT0L, lower);
+ mtspr (DBAT0U, upper);
+ break;
case IBAT0:
mtspr (IBAT0L, lower);
mtspr (IBAT0U, upper);
break;
-
+ case DBAT1:
+ mtspr (DBAT1L, lower);
+ mtspr (DBAT1U, upper);
+ break;
case IBAT1:
mtspr (IBAT1L, lower);
mtspr (IBAT1U, upper);
break;
-
+ case DBAT2:
+ mtspr (DBAT2L, lower);
+ mtspr (DBAT2U, upper);
+ break;
case IBAT2:
mtspr (IBAT2L, lower);
mtspr (IBAT2U, upper);
break;
-
+ case DBAT3:
+ mtspr (DBAT3L, lower);
+ mtspr (DBAT3U, upper);
+ break;
case IBAT3:
mtspr (IBAT3L, lower);
mtspr (IBAT3U, upper);
break;
-
- case DBAT0:
- mtspr (DBAT0L, lower);
- mtspr (DBAT0U, upper);
+#ifdef CONFIG_HIGH_BATS
+ case DBAT4:
+ mtspr (DBAT4L, lower);
+ mtspr (DBAT4U, upper);
break;
-
- case DBAT1:
- mtspr (DBAT1L, lower);
- mtspr (DBAT1U, upper);
+ case IBAT4:
+ mtspr (IBAT4L, lower);
+ mtspr (IBAT4U, upper);
break;
-
- case DBAT2:
- mtspr (DBAT2L, lower);
- mtspr (DBAT2U, upper);
+ case DBAT5:
+ mtspr (DBAT5L, lower);
+ mtspr (DBAT5U, upper);
break;
-
- case DBAT3:
- mtspr (DBAT3L, lower);
- mtspr (DBAT3U, upper);
+ case IBAT5:
+ mtspr (IBAT5L, lower);
+ mtspr (IBAT5U, upper);
break;
-
+ case DBAT6:
+ mtspr (DBAT6L, lower);
+ mtspr (DBAT6U, upper);
+ break;
+ case IBAT6:
+ mtspr (IBAT6L, lower);
+ mtspr (IBAT6U, upper);
+ break;
+ case DBAT7:
+ mtspr (DBAT7L, lower);
+ mtspr (DBAT7U, upper);
+ break;
+ case IBAT7:
+ mtspr (IBAT7L, lower);
+ mtspr (IBAT7U, upper);
+ break;
+#endif
default:
return (-1);
}
unsigned long register l;
switch (bat) {
+ case DBAT0:
+ l = mfspr (DBAT0L);
+ u = mfspr (DBAT0U);
+ break;
case IBAT0:
l = mfspr (IBAT0L);
u = mfspr (IBAT0U);
break;
-
+ case DBAT1:
+ l = mfspr (DBAT1L);
+ u = mfspr (DBAT1U);
+ break;
case IBAT1:
l = mfspr (IBAT1L);
u = mfspr (IBAT1U);
break;
-
+ case DBAT2:
+ l = mfspr (DBAT2L);
+ u = mfspr (DBAT2U);
+ break;
case IBAT2:
l = mfspr (IBAT2L);
u = mfspr (IBAT2U);
break;
-
+ case DBAT3:
+ l = mfspr (DBAT3L);
+ u = mfspr (DBAT3U);
+ break;
case IBAT3:
l = mfspr (IBAT3L);
u = mfspr (IBAT3U);
break;
-
- case DBAT0:
- l = mfspr (DBAT0L);
- u = mfspr (DBAT0U);
+#ifdef CONFIG_HIGH_BATS
+ case DBAT4:
+ l = mfspr (DBAT4L);
+ u = mfspr (DBAT4U);
break;
-
- case DBAT1:
- l = mfspr (DBAT1L);
- u = mfspr (DBAT1U);
+ case IBAT4:
+ l = mfspr (IBAT4L);
+ u = mfspr (IBAT4U);
break;
-
- case DBAT2:
- l = mfspr (DBAT2L);
- u = mfspr (DBAT2U);
+ case DBAT5:
+ l = mfspr (DBAT5L);
+ u = mfspr (DBAT5U);
break;
-
- case DBAT3:
- l = mfspr (DBAT3L);
- u = mfspr (DBAT3U);
+ case IBAT5:
+ l = mfspr (IBAT5L);
+ u = mfspr (IBAT5U);
break;
-
+ case DBAT6:
+ l = mfspr (DBAT6L);
+ u = mfspr (DBAT6U);
+ break;
+ case IBAT6:
+ l = mfspr (IBAT6L);
+ u = mfspr (IBAT6U);
+ break;
+ case DBAT7:
+ l = mfspr (DBAT7L);
+ u = mfspr (DBAT7U);
+ break;
+ case IBAT7:
+ l = mfspr (IBAT7L);
+ u = mfspr (IBAT7U);
+ break;
+#endif
default:
return (-1);
}
return (0);
}
+
+void print_bats(void)
+{
+ printf("BAT registers:\n");
+
+ printf ("\tIBAT0L = 0x%08X ", mfspr (IBAT0L));
+ printf ("\tIBAT0U = 0x%08X\n", mfspr (IBAT0U));
+ printf ("\tDBAT0L = 0x%08X ", mfspr (DBAT0L));
+ printf ("\tDBAT0U = 0x%08X\n", mfspr (DBAT0U));
+ printf ("\tIBAT1L = 0x%08X ", mfspr (IBAT1L));
+ printf ("\tIBAT1U = 0x%08X\n", mfspr (IBAT1U));
+ printf ("\tDBAT1L = 0x%08X ", mfspr (DBAT1L));
+ printf ("\tDBAT1U = 0x%08X\n", mfspr (DBAT1U));
+ printf ("\tIBAT2L = 0x%08X ", mfspr (IBAT2L));
+ printf ("\tIBAT2U = 0x%08X\n", mfspr (IBAT2U));
+ printf ("\tDBAT2L = 0x%08X ", mfspr (DBAT2L));
+ printf ("\tDBAT2U = 0x%08X\n", mfspr (DBAT2U));
+ printf ("\tIBAT3L = 0x%08X ", mfspr (IBAT3L));
+ printf ("\tIBAT3U = 0x%08X\n", mfspr (IBAT3U));
+ printf ("\tDBAT3L = 0x%08X ", mfspr (DBAT3L));
+ printf ("\tDBAT3U = 0x%08X\n", mfspr (DBAT3U));
+
+#ifdef CONFIG_HIGH_BATS
+ printf ("\tIBAT4L = 0x%08X ", mfspr (IBAT4L));
+ printf ("\tIBAT4U = 0x%08X\n", mfspr (IBAT4U));
+ printf ("\tDBAT4L = 0x%08X ", mfspr (DBAT4L));
+ printf ("\tDBAT4U = 0x%08X\n", mfspr (DBAT4U));
+ printf ("\tIBAT5L = 0x%08X ", mfspr (IBAT5L));
+ printf ("\tIBAT5U = 0x%08X\n", mfspr (IBAT5U));
+ printf ("\tDBAT5L = 0x%08X ", mfspr (DBAT5L));
+ printf ("\tDBAT5U = 0x%08X\n", mfspr (DBAT5U));
+ printf ("\tIBAT6L = 0x%08X ", mfspr (IBAT6L));
+ printf ("\tIBAT6U = 0x%08X\n", mfspr (IBAT6U));
+ printf ("\tDBAT6L = 0x%08X ", mfspr (DBAT6L));
+ printf ("\tDBAT6U = 0x%08X\n", mfspr (DBAT6U));
+ printf ("\tIBAT7L = 0x%08X ", mfspr (IBAT7L));
+ printf ("\tIBAT7U = 0x%08X\n", mfspr (IBAT7U));
+ printf ("\tDBAT7L = 0x%08X ", mfspr (DBAT7L));
+ printf ("\tDBAT7U = 0x%08X\n", mfspr (DBAT7U));
+#endif
+}
#if defined(CONFIG_HARD_SPI)
#include <spi.h>
#endif
-#if defined(CONFIG_CMD_NAND)
-void nand_init (void);
-#endif
+#include <nand.h>
static char *failed = "*** failed ***\n";
************************************************************************
*/
+#ifdef CONFIG_LOGBUFFER
+unsigned long logbuffer_base(void)
+{
+ return CFG_SDRAM_BASE + get_effective_memsize() - LOGBUFF_LEN;
+}
+#endif
+
void board_init_f (ulong bootflag)
{
bd_t *bd;
/* compiler optimization barrier needed for GCC >= 3.4 */
__asm__ __volatile__("": : :"memory");
-#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC83XX)
+#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC83XX) && \
+ !defined(CONFIG_MPC85xx) && !defined(CONFIG_MPC86xx)
/* Clear initial global data */
memset ((void *) gd, 0, sizeof (gd_t));
#endif
}
#if defined(CONFIG_CMD_NAND)
-void nand_init (void);
+#include <nand.h>
static int sh_nand_init(void)
{
printf("NAND: ");
#if defined(CONFIG_FSLDMAFEC)
mcdmafec_initialize(bis);
#endif
-#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260)
+#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
+ defined(CONFIG_AT91SAM9263)
at91sam9_eth_initialize(bis);
#endif
#if CONFIG_POST & CFG_POST_BSPEC3
+/* Testpattern for fpga memorytest */
+static uint pattern[] = {
+ 0x55555555,
+ 0xAAAAAAAA,
+ 0xAA5555AA,
+ 0x55AAAA55,
+ 0x0
+};
+
static int one_scratch_test(uint value)
{
uint read_value;
return ret;
}
+/* FPGA Memory-pattern-test */
+static int fpga_mem_test(void * address)
+{
+ int ret = 1;
+ uint read_value;
+ uint old_value;
+ uint i = 0;
+ /* save content */
+ old_value = in_be32(address);
+
+ while (pattern[i] != 0) {
+ out_be32(address, pattern[i]);
+ /* read other location (protect against data lines capacity) */
+ ret = in_be16((void *)FPGA_VERSION_REG);
+ /* verify test pattern */
+ read_value = in_be32(address);
+
+ if (read_value != pattern[i]) {
+ post_log("FPGA Memory test failed.");
+ post_log(" write %08X, read %08X at address %08X\n",
+ pattern[i], read_value, address);
+ ret = 1;
+ goto out;
+ }
+ i++;
+ }
+
+ ret = 0;
+out:
+ out_be32(address, old_value);
+ return ret;
+}
/* Verify FPGA, get version & memory size */
int fpga_post_test(int flags)
{
+ uint address;
uint old_value;
ushort version;
uint read_value;
read_value = get_ram_size((void *)CFG_FPGA_BASE_1, 0x4000);
post_log("FPGA RAM size: %d bytes\n", read_value);
+ for (address = 0; address < 0x1000; address++) {
+ if (fpga_mem_test((void *)(FPGA_RAM_START + 4*address)) == 1) {
+ ret = 1;
+ goto out;
+ }
+ }
+
+out:
return ret;
}
ifeq ($(LOGO_BMP),)
LOGO_BMP= logos/denx.bmp
endif
+ifeq ($(VENDOR),atmel)
+LOGO_BMP= logos/atmel.bmp
+endif
+
#-------------------------------------------------------------------------
projects / people / ms / u-boot.git / commitdiff
