[people/ms/u-boot.git] / include / configs / zynq-common.h

/*
 * (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
 * (C) Copyright 2013 Xilinx, Inc.
 *
 * Common configuration options for all Zynq boards.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_ZYNQ_COMMON_H
#define __CONFIG_ZYNQ_COMMON_H

/* CPU clock */
#ifndef CONFIG_CPU_FREQ_HZ
# define CONFIG_CPU_FREQ_HZ	800000000
#endif

/* Cache options */
#define CONFIG_SYS_CACHELINE_SIZE	32

#define CONFIG_SYS_L2CACHE_OFF
#ifndef CONFIG_SYS_L2CACHE_OFF
# define CONFIG_SYS_L2_PL310
# define CONFIG_SYS_PL310_BASE		0xf8f02000
#endif

#define ZYNQ_SCUTIMER_BASEADDR		0xF8F00600
#define CONFIG_SYS_TIMERBASE		ZYNQ_SCUTIMER_BASEADDR
#define CONFIG_SYS_TIMER_COUNTS_DOWN
#define CONFIG_SYS_TIMER_COUNTER	(CONFIG_SYS_TIMERBASE + 0x4)

/* Serial drivers */
#define CONFIG_BAUDRATE		115200
/* The following table includes the supported baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE  \
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}

#define CONFIG_ARM_DCC
#define CONFIG_ZYNQ_SERIAL

/* Ethernet driver */
#if defined(CONFIG_ZYNQ_GEM)
# define CONFIG_MII
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
# define CONFIG_PHY_MARVELL
# define CONFIG_PHY_REALTEK
# define CONFIG_PHY_XILINX
# define CONFIG_BOOTP_SERVERIP
# define CONFIG_BOOTP_BOOTPATH
# define CONFIG_BOOTP_GATEWAY
# define CONFIG_BOOTP_HOSTNAME
# define CONFIG_BOOTP_MAY_FAIL
#endif

/* SPI */
#ifdef CONFIG_ZYNQ_SPI
#endif

/* QSPI */
#ifdef CONFIG_ZYNQ_QSPI
# define CONFIG_SF_DEFAULT_SPEED	30000000
# define CONFIG_SPI_FLASH_ISSI
#endif

/* NOR */
#ifndef CONFIG_SYS_NO_FLASH
# define CONFIG_SYS_FLASH_BASE		0xE2000000
# define CONFIG_SYS_FLASH_SIZE		(16 * 1024 * 1024)
# define CONFIG_SYS_MAX_FLASH_BANKS	1
# define CONFIG_SYS_MAX_FLASH_SECT	512
# define CONFIG_SYS_FLASH_ERASE_TOUT	1000
# define CONFIG_SYS_FLASH_WRITE_TOUT	5000
# define CONFIG_FLASH_SHOW_PROGRESS	10
# define CONFIG_SYS_FLASH_CFI
# undef CONFIG_SYS_FLASH_EMPTY_INFO
# define CONFIG_FLASH_CFI_DRIVER
# undef CONFIG_SYS_FLASH_PROTECTION
# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
#endif

/* MMC */
#if defined(CONFIG_ZYNQ_SDHCI)
# define CONFIG_MMC
# define CONFIG_GENERIC_MMC
# define CONFIG_SDHCI
# define CONFIG_ZYNQ_SDHCI_MAX_FREQ	52000000
#endif

#ifdef CONFIG_ZYNQ_USB
# define CONFIG_USB_EHCI
# define CONFIG_USB_STORAGE
# define CONFIG_USB_EHCI_ZYNQ
# define CONFIG_EHCI_IS_TDI
# define CONFIG_USB_MAX_CONTROLLER_COUNT	2

# define CONFIG_SYS_DFU_DATA_BUF_SIZE	0x600000
# define DFU_DEFAULT_POLL_TIMEOUT	300
# define CONFIG_USB_FUNCTION_DFU
# define CONFIG_DFU_RAM
# define CONFIG_USB_CABLE_CHECK
# define CONFIG_CMD_THOR_DOWNLOAD
# define CONFIG_THOR_RESET_OFF
# define CONFIG_USB_FUNCTION_THOR
# define DFU_ALT_INFO_RAM \
	"dfu_ram_info=" \
	"set dfu_alt_info " \
	"${kernel_image} ram 0x3000000 0x500000\\\\;" \
	"${devicetree_image} ram 0x2A00000 0x20000\\\\;" \
	"${ramdisk_image} ram 0x2000000 0x600000\0" \
	"dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
	"thor_ram=run dfu_ram_info && thordown 0 ram 0\0"

# if defined(CONFIG_ZYNQ_SDHCI)
#  define CONFIG_DFU_MMC
#  define DFU_ALT_INFO_MMC \
	"dfu_mmc_info=" \
	"set dfu_alt_info " \
	"${kernel_image} fat 0 1\\\\;" \
	"${devicetree_image} fat 0 1\\\\;" \
	"${ramdisk_image} fat 0 1\0" \
	"dfu_mmc=run dfu_mmc_info && dfu 0 mmc 0\0" \
	"thor_mmc=run dfu_mmc_info && thordown 0 mmc 0\0"

#  define DFU_ALT_INFO	\
	DFU_ALT_INFO_RAM \
	DFU_ALT_INFO_MMC
# else
#  define DFU_ALT_INFO	\
	DFU_ALT_INFO_RAM
# endif
#endif

#if !defined(DFU_ALT_INFO)
# define DFU_ALT_INFO
#endif

#if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQ_USB)
# define CONFIG_SUPPORT_VFAT
# define CONFIG_FAT_WRITE
# define CONFIG_DOS_PARTITION
#endif

#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
#define CONFIG_SYS_I2C_ZYNQ
#endif

/* I2C */
#if defined(CONFIG_SYS_I2C_ZYNQ)
# define CONFIG_SYS_I2C
# define CONFIG_SYS_I2C_ZYNQ_SPEED		100000
# define CONFIG_SYS_I2C_ZYNQ_SLAVE		0
#endif

/* EEPROM */
#ifdef CONFIG_ZYNQ_EEPROM
# define CONFIG_CMD_EEPROM
# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
# define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
# define CONFIG_SYS_EEPROM_SIZE			1024 /* Bytes */
#endif

/* Total Size of Environment Sector */
#define CONFIG_ENV_SIZE			(128 << 10)

/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE

/* Environment */
#ifndef CONFIG_ENV_IS_NOWHERE
# ifndef CONFIG_SYS_NO_FLASH
/* Environment in NOR flash */
#  define CONFIG_ENV_IS_IN_FLASH
# elif defined(CONFIG_ZYNQ_QSPI)
/* Environment in Serial Flash */
#  define CONFIG_ENV_IS_IN_SPI_FLASH
# elif defined(CONFIG_SYS_NO_FLASH)
#  define CONFIG_ENV_IS_NOWHERE
# endif

# define CONFIG_ENV_SECT_SIZE		CONFIG_ENV_SIZE
# define CONFIG_ENV_OFFSET		0xE0000
#endif

/* enable preboot to be loaded before CONFIG_BOOTDELAY */
#define CONFIG_PREBOOT

/* Default environment */
#ifndef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS	\
	"fit_image=fit.itb\0"		\
	"load_addr=0x2000000\0"		\
	"fit_size=0x800000\0"		\
	"flash_off=0x100000\0"		\
	"nor_flash_off=0xE2100000\0"	\
	"fdt_high=0x20000000\0"		\
	"initrd_high=0x20000000\0"	\
	"loadbootenv_addr=0x2000000\0" \
	"bootenv=uEnv.txt\0" \
	"bootenv_dev=mmc\0" \
	"loadbootenv=load ${bootenv_dev} 0 ${loadbootenv_addr} ${bootenv}\0" \
	"importbootenv=echo Importing environment from ${bootenv_dev} ...; " \
		"env import -t ${loadbootenv_addr} $filesize\0" \
	"bootenv_existence_test=test -e ${bootenv_dev} 0 /${bootenv}\0" \
	"setbootenv=if env run bootenv_existence_test; then " \
			"if env run loadbootenv; then " \
				"env run importbootenv; " \
			"fi; " \
		"fi; \0" \
	"sd_loadbootenv=set bootenv_dev mmc && " \
			"run setbootenv \0" \
	"usb_loadbootenv=set bootenv_dev usb && usb start && run setbootenv \0" \
	"preboot=if test $modeboot = sdboot; then " \
			"run sd_loadbootenv; " \
			"echo Checking if uenvcmd is set ...; " \
			"if test -n $uenvcmd; then " \
				"echo Running uenvcmd ...; " \
				"run uenvcmd; " \
			"fi; " \
		"fi; \0" \
	"norboot=echo Copying FIT from NOR flash to RAM... && " \
		"cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \
		"bootm ${load_addr}\0" \
	"sdboot=echo Copying FIT from SD to RAM... && " \
		"load mmc 0 ${load_addr} ${fit_image} && " \
		"bootm ${load_addr}\0" \
	"jtagboot=echo TFTPing FIT to RAM... && " \
		"tftpboot ${load_addr} ${fit_image} && " \
		"bootm ${load_addr}\0" \
	"usbboot=if usb start; then " \
			"echo Copying FIT from USB to RAM... && " \
			"load usb 0 ${load_addr} ${fit_image} && " \
			"bootm ${load_addr}; fi\0" \
		DFU_ALT_INFO
#endif

#define CONFIG_BOOTCOMMAND		"run $modeboot"
#define CONFIG_BOOTDELAY		3 /* -1 to Disable autoboot */
#define CONFIG_SYS_LOAD_ADDR		0 /* default? */

/* Miscellaneous configurable options */

#define CONFIG_CMDLINE_EDITING
#define CONFIG_AUTO_COMPLETE
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SYS_LONGHELP
#define CONFIG_CLOCKS
#define CONFIG_CMD_CLK
#define CONFIG_SYS_MAXARGS		32 /* max number of command args */
#define CONFIG_SYS_CBSIZE		256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)

/* Physical Memory map */
#define CONFIG_SYS_TEXT_BASE		0x4000000

#ifndef CONFIG_NR_DRAM_BANKS
# define CONFIG_NR_DRAM_BANKS		1
#endif

#define CONFIG_SYS_MEMTEST_START	0
#define CONFIG_SYS_MEMTEST_END		0x1000

#define CONFIG_SYS_MALLOC_LEN		0x1400000

#define CONFIG_SYS_INIT_RAM_ADDR	0xFFFF0000
#define CONFIG_SYS_INIT_RAM_SIZE	0x1000
#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
					CONFIG_SYS_INIT_RAM_SIZE - \
					GENERATED_GBL_DATA_SIZE)

/* Enable the PL to be downloaded */
#define CONFIG_FPGA
#define CONFIG_FPGA_XILINX
#define CONFIG_FPGA_ZYNQPL
#define CONFIG_CMD_FPGA_LOADMK
#define CONFIG_CMD_FPGA_LOADP
#define CONFIG_CMD_FPGA_LOADBP
#define CONFIG_CMD_FPGA_LOADFS

/* FIT support */
#define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */

/* FDT support */
#define CONFIG_DISPLAY_BOARDINFO_LATE

/* Extend size of kernel image for uncompression */
#define CONFIG_SYS_BOOTM_LEN	(60 * 1024 * 1024)

/* Boot FreeBSD/vxWorks from an ELF image */
#define CONFIG_SYS_MMC_MAX_DEVICE	1

#define CONFIG_SYS_LDSCRIPT  "arch/arm/mach-zynq/u-boot.lds"

/* Commands */

/* SPL part */
#define CONFIG_CMD_SPL
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_RAM_DEVICE

#define CONFIG_SPL_LDSCRIPT	"arch/arm/mach-zynq/u-boot-spl.lds"

/* MMC support */
#ifdef CONFIG_ZYNQ_SDHCI
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
#define CONFIG_SPL_LIBDISK_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
#ifdef CONFIG_OF_SEPARATE
# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot-dtb.img"
#else
# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot.img"
#endif
#endif

/* Disable dcache for SPL just for sure */
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_DCACHE_OFF
#undef CONFIG_FPGA
#endif

/* Address in RAM where the parameters must be copied by SPL. */
#define CONFIG_SYS_SPL_ARGS_ADDR	0x10000000

#define CONFIG_SPL_FS_LOAD_ARGS_NAME		"system.dtb"
#define CONFIG_SPL_FS_LOAD_KERNEL_NAME		"uImage"

/* Not using MMC raw mode - just for compilation purpose */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0

/* qspi mode is working fine */
#ifdef CONFIG_ZYNQ_QSPI
#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x100000
#define CONFIG_SYS_SPI_ARGS_OFFS	0x200000
#define CONFIG_SYS_SPI_ARGS_SIZE	0x80000
#define CONFIG_SYS_SPI_KERNEL_OFFS	(CONFIG_SYS_SPI_ARGS_OFFS + \
					CONFIG_SYS_SPI_ARGS_SIZE)
#endif

/* for booting directly linux */
#define CONFIG_SPL_OS_BOOT

/* SP location before relocation, must use scratch RAM */
#define CONFIG_SPL_TEXT_BASE	0x0

/* 3 * 64kB blocks of OCM - one is on the top because of bootrom */
#define CONFIG_SPL_MAX_SIZE	0x30000

/* The highest 64k OCM address */
#define OCM_HIGH_ADDR	0xffff0000

/* On the top of OCM space */
#define CONFIG_SYS_SPL_MALLOC_START	OCM_HIGH_ADDR
#define CONFIG_SYS_SPL_MALLOC_SIZE	0x2000

/*
 * SPL stack position - and stack goes down
 * 0xfffffe00 is used for putting wfi loop.
 * Set it up as limit for now.
 */
#define CONFIG_SPL_STACK	0xfffffe00

/* BSS setup */
#define CONFIG_SPL_BSS_START_ADDR	0x100000
#define CONFIG_SPL_BSS_MAX_SIZE		0x100000

#define CONFIG_SYS_UBOOT_START	CONFIG_SYS_TEXT_BASE

#endif /* __CONFIG_ZYNQ_COMMON_H */
Commit	Line	Data
f22651cf MS	1	/*
f22651cf MS	2	* (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
06fe8dae JT	3	* (C) Copyright 2013 Xilinx, Inc.
	4	*
	5	* Common configuration options for all Zynq boards.
f22651cf	6	*
1a459660	7	* SPDX-License-Identifier: GPL-2.0+
f22651cf MS	8	*/
f22651cf MS	9
06fe8dae JT	10	#ifndef __CONFIG_ZYNQ_COMMON_H
06fe8dae JT	11	#define __CONFIG_ZYNQ_COMMON_H
f22651cf	12
f22651cf	13	/* CPU clock */
53e49f74 JT	14	#ifndef CONFIG_CPU_FREQ_HZ
	15	# define CONFIG_CPU_FREQ_HZ 800000000
	16	#endif
f22651cf	17
8cfac504	18	/* Cache options */
8cfac504 JT	19	#define CONFIG_SYS_CACHELINE_SIZE 32
	20
	21	#define CONFIG_SYS_L2CACHE_OFF
	22	#ifndef CONFIG_SYS_L2CACHE_OFF
	23	# define CONFIG_SYS_L2_PL310
	24	# define CONFIG_SYS_PL310_BASE 0xf8f02000
	25	#endif
	26
a2ec7fb9 MS	27	#define ZYNQ_SCUTIMER_BASEADDR 0xF8F00600
	28	#define CONFIG_SYS_TIMERBASE ZYNQ_SCUTIMER_BASEADDR
	29	#define CONFIG_SYS_TIMER_COUNTS_DOWN
	30	#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4)
	31
53e49f74 JT	32	/* Serial drivers */
53e49f74 JT	33	#define CONFIG_BAUDRATE 115200
f22651cf MS	34	/* The following table includes the supported baudrates */
	35	#define CONFIG_SYS_BAUDRATE_TABLE \
	36	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
	37
636ac181 MS	38	#define CONFIG_ARM_DCC
636ac181 MS	39	#define CONFIG_ZYNQ_SERIAL
53e49f74	40
f22651cf	41	/* Ethernet driver */
596e5782	42	#if defined(CONFIG_ZYNQ_GEM)
88fcfb1c JT	43	# define CONFIG_MII
88fcfb1c JT	44	# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
88fcfb1c	45	# define CONFIG_PHY_MARVELL
9ec2cf00	46	# define CONFIG_PHY_REALTEK
217185b3	47	# define CONFIG_PHY_XILINX
dd1c351f MS	48	# define CONFIG_BOOTP_SERVERIP
	49	# define CONFIG_BOOTP_BOOTPATH
	50	# define CONFIG_BOOTP_GATEWAY
	51	# define CONFIG_BOOTP_HOSTNAME
	52	# define CONFIG_BOOTP_MAY_FAIL
88fcfb1c	53	#endif
f22651cf	54
53e49f74 JT	55	/* SPI */
53e49f74 JT	56	#ifdef CONFIG_ZYNQ_SPI
53e49f74 JT	57	#endif
53e49f74 JT	58
a241d4ec JT	59	/* QSPI */
	60	#ifdef CONFIG_ZYNQ_QSPI
	61	# define CONFIG_SF_DEFAULT_SPEED 30000000
232a8e4e	62	# define CONFIG_SPI_FLASH_ISSI
a241d4ec JT	63	#endif
a241d4ec JT	64
fe5eddbf JT	65	/* NOR */
	66	#ifndef CONFIG_SYS_NO_FLASH
	67	# define CONFIG_SYS_FLASH_BASE 0xE2000000
	68	# define CONFIG_SYS_FLASH_SIZE (16 * 1024 * 1024)
	69	# define CONFIG_SYS_MAX_FLASH_BANKS 1
	70	# define CONFIG_SYS_MAX_FLASH_SECT 512
	71	# define CONFIG_SYS_FLASH_ERASE_TOUT 1000
	72	# define CONFIG_SYS_FLASH_WRITE_TOUT 5000
	73	# define CONFIG_FLASH_SHOW_PROGRESS 10
	74	# define CONFIG_SYS_FLASH_CFI
	75	# undef CONFIG_SYS_FLASH_EMPTY_INFO
	76	# define CONFIG_FLASH_CFI_DRIVER
	77	# undef CONFIG_SYS_FLASH_PROTECTION
	78	# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
	79	#endif
	80
293eb33f	81	/* MMC */
ce0335f2	82	#if defined(CONFIG_ZYNQ_SDHCI)
293eb33f MS	83	# define CONFIG_MMC
	84	# define CONFIG_GENERIC_MMC
	85	# define CONFIG_SDHCI
f3bd7280	86	# define CONFIG_ZYNQ_SDHCI_MAX_FREQ 52000000
293eb33f MS	87	#endif
293eb33f MS	88
c6024c8e SDPP	89	#ifdef CONFIG_ZYNQ_USB
c6024c8e SDPP	90	# define CONFIG_USB_EHCI
c6024c8e	91	# define CONFIG_USB_STORAGE
c6024c8e	92	# define CONFIG_USB_EHCI_ZYNQ
c6024c8e SDPP	93	# define CONFIG_EHCI_IS_TDI
c6024c8e SDPP	94	# define CONFIG_USB_MAX_CONTROLLER_COUNT 2
87f3dbdf	95
87f3dbdf SDPP	96	# define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x600000
87f3dbdf SDPP	97	# define DFU_DEFAULT_POLL_TIMEOUT 300
01acd6ab	98	# define CONFIG_USB_FUNCTION_DFU
87f3dbdf	99	# define CONFIG_DFU_RAM
87f3dbdf	100	# define CONFIG_USB_CABLE_CHECK
c4fa5114	101	# define CONFIG_CMD_THOR_DOWNLOAD
1e8d3830	102	# define CONFIG_THOR_RESET_OFF
01acd6ab	103	# define CONFIG_USB_FUNCTION_THOR
87f3dbdf SDPP	104	# define DFU_ALT_INFO_RAM \
	105	"dfu_ram_info=" \
	106	"set dfu_alt_info " \
	107	"${kernel_image} ram 0x3000000 0x500000\\\\;" \
	108	"${devicetree_image} ram 0x2A00000 0x20000\\\\;" \
	109	"${ramdisk_image} ram 0x2000000 0x600000\0" \
c4fa5114 SDPP	110	"dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
c4fa5114 SDPP	111	"thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
87f3dbdf	112
ce0335f2	113	# if defined(CONFIG_ZYNQ_SDHCI)
87f3dbdf SDPP	114	# define CONFIG_DFU_MMC
	115	# define DFU_ALT_INFO_MMC \
	116	"dfu_mmc_info=" \
	117	"set dfu_alt_info " \
	118	"${kernel_image} fat 0 1\\\\;" \
	119	"${devicetree_image} fat 0 1\\\\;" \
	120	"${ramdisk_image} fat 0 1\0" \
c4fa5114 SDPP	121	"dfu_mmc=run dfu_mmc_info && dfu 0 mmc 0\0" \
	122	"thor_mmc=run dfu_mmc_info && thordown 0 mmc 0\0"
	123
87f3dbdf SDPP	124	# define DFU_ALT_INFO \
	125	DFU_ALT_INFO_RAM \
	126	DFU_ALT_INFO_MMC
	127	# else
	128	# define DFU_ALT_INFO \
	129	DFU_ALT_INFO_RAM
	130	# endif
	131	#endif
	132
	133	#if !defined(DFU_ALT_INFO)
	134	# define DFU_ALT_INFO
c6024c8e SDPP	135	#endif
c6024c8e SDPP	136
47b35a51	137	#if defined(CONFIG_ZYNQ_SDHCI) \|\| defined(CONFIG_ZYNQ_USB)
293eb33f	138	# define CONFIG_SUPPORT_VFAT
47b35a51	139	# define CONFIG_FAT_WRITE
293eb33f MS	140	# define CONFIG_DOS_PARTITION
	141	#endif
	142
1c3f2c72	143	#if defined(CONFIG_ZYNQ_I2C0) \|\| defined(CONFIG_ZYNQ_I2C1)
18948632	144	#define CONFIG_SYS_I2C_ZYNQ
1c3f2c72 SDPP	145	#endif
1c3f2c72 SDPP	146
8934f784	147	/* I2C */
18948632	148	#if defined(CONFIG_SYS_I2C_ZYNQ)
0bdffe71	149	# define CONFIG_SYS_I2C
0bdffe71	150	# define CONFIG_SYS_I2C_ZYNQ_SPEED 100000
18948632	151	# define CONFIG_SYS_I2C_ZYNQ_SLAVE 0
8934f784 MS	152	#endif
8934f784 MS	153
65da1efd JT	154	/* EEPROM */
	155	#ifdef CONFIG_ZYNQ_EEPROM
	156	# define CONFIG_CMD_EEPROM
	157	# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	158	# define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
	159	# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
	160	# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
	161	# define CONFIG_SYS_EEPROM_SIZE 1024 /* Bytes */
	162	#endif
	163
18eee22f JT	164	/* Total Size of Environment Sector */
	165	#define CONFIG_ENV_SIZE (128 << 10)
	166
b660ca13 JT	167	/* Allow to overwrite serial and ethaddr */
	168	#define CONFIG_ENV_OVERWRITE
	169
f22651cf	170	/* Environment */
ed53e4d6 JT	171	#ifndef CONFIG_ENV_IS_NOWHERE
ed53e4d6 JT	172	# ifndef CONFIG_SYS_NO_FLASH
18c61e95	173	/* Environment in NOR flash */
ed53e4d6	174	# define CONFIG_ENV_IS_IN_FLASH
18c61e95 MS	175	# elif defined(CONFIG_ZYNQ_QSPI)
	176	/* Environment in Serial Flash */
	177	# define CONFIG_ENV_IS_IN_SPI_FLASH
ed53e4d6 JT	178	# elif defined(CONFIG_SYS_NO_FLASH)
	179	# define CONFIG_ENV_IS_NOWHERE
	180	# endif
	181
	182	# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
	183	# define CONFIG_ENV_OFFSET 0xE0000
ed53e4d6	184	#endif
e83f61a6	185
4d1ed9c7 MS	186	/* enable preboot to be loaded before CONFIG_BOOTDELAY */
	187	#define CONFIG_PREBOOT
	188
e83f61a6	189	/* Default environment */
b7b3efe7	190	#ifndef CONFIG_EXTRA_ENV_SETTINGS
e83f61a6 JT	191	#define CONFIG_EXTRA_ENV_SETTINGS \
	192	"fit_image=fit.itb\0" \
	193	"load_addr=0x2000000\0" \
	194	"fit_size=0x800000\0" \
	195	"flash_off=0x100000\0" \
	196	"nor_flash_off=0xE2100000\0" \
	197	"fdt_high=0x20000000\0" \
	198	"initrd_high=0x20000000\0" \
4d1ed9c7 MS	199	"loadbootenv_addr=0x2000000\0" \
	200	"bootenv=uEnv.txt\0" \
	201	"bootenv_dev=mmc\0" \
	202	"loadbootenv=load ${bootenv_dev} 0 ${loadbootenv_addr} ${bootenv}\0" \
	203	"importbootenv=echo Importing environment from ${bootenv_dev} ...; " \
	204	"env import -t ${loadbootenv_addr} $filesize\0" \
	205	"bootenv_existence_test=test -e ${bootenv_dev} 0 /${bootenv}\0" \
	206	"setbootenv=if env run bootenv_existence_test; then " \
	207	"if env run loadbootenv; then " \
	208	"env run importbootenv; " \
	209	"fi; " \
	210	"fi; \0" \
	211	"sd_loadbootenv=set bootenv_dev mmc && " \
	212	"run setbootenv \0" \
	213	"usb_loadbootenv=set bootenv_dev usb && usb start && run setbootenv \0" \
	214	"preboot=if test $modeboot = sdboot; then " \
	215	"run sd_loadbootenv; " \
	216	"echo Checking if uenvcmd is set ...; " \
	217	"if test -n $uenvcmd; then " \
	218	"echo Running uenvcmd ...; " \
	219	"run uenvcmd; " \
	220	"fi; " \
	221	"fi; \0" \
e83f61a6 JT	222	"norboot=echo Copying FIT from NOR flash to RAM... && " \
	223	"cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \
	224	"bootm ${load_addr}\0" \
	225	"sdboot=echo Copying FIT from SD to RAM... && " \
e9d69c1c	226	"load mmc 0 ${load_addr} ${fit_image} && " \
e83f61a6 JT	227	"bootm ${load_addr}\0" \
e83f61a6 JT	228	"jtagboot=echo TFTPing FIT to RAM... && " \
dfa94058	229	"tftpboot ${load_addr} ${fit_image} && " \
c6024c8e SDPP	230	"bootm ${load_addr}\0" \
	231	"usbboot=if usb start; then " \
	232	"echo Copying FIT from USB to RAM... && " \
e9d69c1c	233	"load usb 0 ${load_addr} ${fit_image} && " \
39bc1a8c	234	"bootm ${load_addr}; fi\0" \
87f3dbdf	235	DFU_ALT_INFO
b7b3efe7	236	#endif
c6024c8e	237
e83f61a6 JT	238	#define CONFIG_BOOTCOMMAND "run $modeboot"
	239	#define CONFIG_BOOTDELAY 3 /* -1 to Disable autoboot */
	240	#define CONFIG_SYS_LOAD_ADDR 0 /* default? */
f22651cf	241
36e0e197	242	/* Miscellaneous configurable options */
36e0e197 JT	243
	244	#define CONFIG_CMDLINE_EDITING
	245	#define CONFIG_AUTO_COMPLETE
b3de9249	246	#define CONFIG_BOARD_LATE_INIT
5a82d53c	247	#define CONFIG_DISPLAY_BOARDINFO
36e0e197	248	#define CONFIG_SYS_LONGHELP
6c3e61de	249	#define CONFIG_CLOCKS
d6c9bbaa	250	#define CONFIG_CMD_CLK
841426ad	251	#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
36e0e197 JT	252	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
36e0e197 JT	253	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
f22651cf MS	254	sizeof(CONFIG_SYS_PROMPT) + 16)
f22651cf MS	255
7cd04192	256	/* Physical Memory map */
0f5c2156	257	#define CONFIG_SYS_TEXT_BASE 0x4000000
f22651cf	258
758f29d0 MS	259	#ifndef CONFIG_NR_DRAM_BANKS
	260	# define CONFIG_NR_DRAM_BANKS 1
	261	#endif
7cd04192	262
c1584e2a MS	263	#define CONFIG_SYS_MEMTEST_START 0
c1584e2a MS	264	#define CONFIG_SYS_MEMTEST_END 0x1000
7cd04192	265
599807fc	266	#define CONFIG_SYS_MALLOC_LEN 0x1400000
c1584e2a MS	267
	268	#define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000
	269	#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
7cd04192 JT	270	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
	271	CONFIG_SYS_INIT_RAM_SIZE - \
	272	GENERATED_GBL_DATA_SIZE)
53e49f74 JT	273
	274	/* Enable the PL to be downloaded */
	275	#define CONFIG_FPGA
	276	#define CONFIG_FPGA_XILINX
	277	#define CONFIG_FPGA_ZYNQPL
64e809af	278	#define CONFIG_CMD_FPGA_LOADMK
26ea9ce5 MS	279	#define CONFIG_CMD_FPGA_LOADP
26ea9ce5 MS	280	#define CONFIG_CMD_FPGA_LOADBP
1a897668	281	#define CONFIG_CMD_FPGA_LOADFS
53e49f74	282
53e49f74	283	/* FIT support */
21d29f7f	284	#define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */
f22651cf	285
f8f36c5d	286	/* FDT support */
f8f36c5d JT	287	#define CONFIG_DISPLAY_BOARDINFO_LATE
f8f36c5d JT	288
ae9f4899	289	/* Extend size of kernel image for uncompression */
3d456eec	290	#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
ae9f4899	291
09ed635b	292	/* Boot FreeBSD/vxWorks from an ELF image */
d82d63cc	293	#define CONFIG_SYS_MMC_MAX_DEVICE 1
09ed635b	294
0107f240	295	#define CONFIG_SYS_LDSCRIPT "arch/arm/mach-zynq/u-boot.lds"
38716189	296
f22651cf	297	/* Commands */
f22651cf	298
d7e269cf	299	/* SPL part */
d7e269cf MS	300	#define CONFIG_CMD_SPL
	301	#define CONFIG_SPL_FRAMEWORK
	302	#define CONFIG_SPL_LIBCOMMON_SUPPORT
	303	#define CONFIG_SPL_LIBGENERIC_SUPPORT
	304	#define CONFIG_SPL_SERIAL_SUPPORT
1540fb72	305	#define CONFIG_SPL_BOARD_INIT
70bdf2f6	306	#define CONFIG_SPL_RAM_DEVICE
d7e269cf	307
0107f240	308	#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-zynq/u-boot-spl.lds"
d7e269cf	309
d7e269cf	310	/* MMC support */
ce0335f2	311	#ifdef CONFIG_ZYNQ_SDHCI
d7e269cf MS	312	#define CONFIG_SPL_MMC_SUPPORT
	313	#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
	314	#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
e2ccdf89	315	#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
d7e269cf MS	316	#define CONFIG_SPL_LIBDISK_SUPPORT
d7e269cf MS	317	#define CONFIG_SPL_FAT_SUPPORT
8741c490	318	#ifdef CONFIG_OF_SEPARATE
fa43f69e SG	319	# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
	320	#else
	321	# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
	322	#endif
0dfbcf02 MY	323	#endif
	324
	325	/* Disable dcache for SPL just for sure */
	326	#ifdef CONFIG_SPL_BUILD
	327	#define CONFIG_SYS_DCACHE_OFF
	328	#undef CONFIG_FPGA
d7e269cf MS	329	#endif
	330
	331	/* Address in RAM where the parameters must be copied by SPL. */
	332	#define CONFIG_SYS_SPL_ARGS_ADDR 0x10000000
	333
205b4f33 GG	334	#define CONFIG_SPL_FS_LOAD_ARGS_NAME "system.dtb"
205b4f33 GG	335	#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
d7e269cf MS	336
	337	/* Not using MMC raw mode - just for compilation purpose */
	338	#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0
	339	#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0
	340	#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0
	341
	342	/* qspi mode is working fine */
	343	#ifdef CONFIG_ZYNQ_QSPI
	344	#define CONFIG_SPL_SPI_SUPPORT
	345	#define CONFIG_SPL_SPI_LOAD
	346	#define CONFIG_SPL_SPI_FLASH_SUPPORT
d7e269cf	347	#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x100000
8e0e01d3 SDPP	348	#define CONFIG_SYS_SPI_ARGS_OFFS 0x200000
	349	#define CONFIG_SYS_SPI_ARGS_SIZE 0x80000
	350	#define CONFIG_SYS_SPI_KERNEL_OFFS (CONFIG_SYS_SPI_ARGS_OFFS + \
	351	CONFIG_SYS_SPI_ARGS_SIZE)
d7e269cf MS	352	#endif
	353
	354	/* for booting directly linux */
	355	#define CONFIG_SPL_OS_BOOT
	356
	357	/* SP location before relocation, must use scratch RAM */
	358	#define CONFIG_SPL_TEXT_BASE 0x0
	359
	360	/* 3 * 64kB blocks of OCM - one is on the top because of bootrom */
	361	#define CONFIG_SPL_MAX_SIZE 0x30000
	362
	363	/* The highest 64k OCM address */
	364	#define OCM_HIGH_ADDR 0xffff0000
	365
d7e269cf	366	/* On the top of OCM space */
83b6464d	367	#define CONFIG_SYS_SPL_MALLOC_START OCM_HIGH_ADDR
ec016a17	368	#define CONFIG_SYS_SPL_MALLOC_SIZE 0x2000
d7e269cf	369
83b6464d MS	370	/*
	371	* SPL stack position - and stack goes down
	372	* 0xfffffe00 is used for putting wfi loop.
	373	* Set it up as limit for now.
	374	*/
	375	#define CONFIG_SPL_STACK 0xfffffe00
	376
d7e269cf MS	377	/* BSS setup */
	378	#define CONFIG_SPL_BSS_START_ADDR 0x100000
	379	#define CONFIG_SPL_BSS_MAX_SIZE 0x100000
	380
	381	#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
f22651cf	382
06fe8dae	383	#endif /* __CONFIG_ZYNQ_COMMON_H */