[people/ms/u-boot.git] / include / configs / uniphier.h

/*
 * Copyright (C) 2012-2015 Panasonic Corporation
 * Copyright (C) 2015-2016 Socionext Inc.
 *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/* U-Boot - Common settings for UniPhier Family */

#ifndef __CONFIG_UNIPHIER_COMMON_H__
#define __CONFIG_UNIPHIER_COMMON_H__

#define CONFIG_ARMV7_PSCI_1_0

#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10

#ifdef CONFIG_ARM64
#define CONFIG_CMD_UNZIP
#endif

/*-----------------------------------------------------------------------
 * MMU and Cache Setting
 *----------------------------------------------------------------------*/

/* Comment out the following to enable L1 cache */
/* #define CONFIG_SYS_ICACHE_OFF */
/* #define CONFIG_SYS_DCACHE_OFF */

#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)

#define CONFIG_TIMESTAMP

/* FLASH related */
#define CONFIG_MTD_DEVICE

#define CONFIG_SMC911X_32_BIT
/* dummy: referenced by examples/standalone/smc911x_eeprom.c */
#define CONFIG_SMC911X_BASE	0

#ifdef CONFIG_MICRO_SUPPORT_CARD
#define CONFIG_SMC911X
#else
#define CONFIG_SYS_NO_FLASH
#endif

#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI

#define CONFIG_SYS_MAX_FLASH_SECT	256
#define CONFIG_SYS_MONITOR_BASE		0
#define CONFIG_SYS_MONITOR_LEN		0x00080000	/* 512KB */
#define CONFIG_SYS_FLASH_BASE		0

/*
 * flash_toggle does not work for our support card.
 * We need to use flash_status_poll.
 */
#define CONFIG_SYS_CFI_FLASH_STATUS_POLL

#define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */

#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1

/* serial console configuration */
#define CONFIG_BAUDRATE			115200

#define CONFIG_SYS_LONGHELP		/* undef to save memory */

#define CONFIG_CMDLINE_EDITING		/* add command line history	*/
#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		16	/* max number of command */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)

#define CONFIG_CONS_INDEX		1

/* #define CONFIG_ENV_IS_NOWHERE */
/* #define CONFIG_ENV_IS_IN_NAND */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET			0x80000
#define CONFIG_ENV_SIZE				0x2000
/* #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */

#define CONFIG_SYS_MMC_ENV_DEV		0
#define CONFIG_SYS_MMC_ENV_PART		1

#ifdef CONFIG_ARMV8_MULTIENTRY
#define CPU_RELEASE_ADDR			0x80000000
#define COUNTER_FREQUENCY			50000000
#define CONFIG_GICV3
#define GICD_BASE				0x5fe00000
#if defined(CONFIG_ARCH_UNIPHIER_LD11)
#define GICR_BASE				0x5fe40000
#elif defined(CONFIG_ARCH_UNIPHIER_LD20)
#define GICR_BASE				0x5fe80000
#endif
#elif !defined(CONFIG_ARM64)
/* Time clock 1MHz */
#define CONFIG_SYS_TIMER_RATE			1000000
#endif

#define CONFIG_SYS_MAX_NAND_DEVICE			1
#define CONFIG_SYS_NAND_MAX_CHIPS			2
#define CONFIG_SYS_NAND_ONFI_DETECTION

#define CONFIG_NAND_DENALI_ECC_SIZE			1024

#ifdef CONFIG_ARCH_UNIPHIER_SLD3
#define CONFIG_SYS_NAND_REGS_BASE			0xf8100000
#define CONFIG_SYS_NAND_DATA_BASE			0xf8000000
#else
#define CONFIG_SYS_NAND_REGS_BASE			0x68100000
#define CONFIG_SYS_NAND_DATA_BASE			0x68000000
#endif

#define CONFIG_SYS_NAND_BASE		(CONFIG_SYS_NAND_DATA_BASE + 0x10)

#define CONFIG_SYS_NAND_USE_FLASH_BBT
#define CONFIG_SYS_NAND_BAD_BLOCK_POS			0

/* USB */
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	4
#define CONFIG_FAT_WRITE

/* SD/MMC */
#define CONFIG_SUPPORT_EMMC_BOOT
#define CONFIG_GENERIC_MMC

/* memtest works on */
#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x01000000)

/*
 * Network Configuration
 */
#define CONFIG_SERVERIP			192.168.11.1
#define CONFIG_IPADDR			192.168.11.10
#define CONFIG_GATEWAYIP		192.168.11.1
#define CONFIG_NETMASK			255.255.255.0

#define CONFIG_LOADADDR			0x84000000
#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR

#define CONFIG_CMDLINE_EDITING		/* add command line history	*/

#define CONFIG_BOOTCOMMAND		"run $bootmode"

#define CONFIG_ROOTPATH			"/nfs/root/path"
#define CONFIG_NFSBOOTCOMMAND						\
	"setenv bootargs $bootargs root=/dev/nfs rw "			\
	"nfsroot=$serverip:$rootpath "					\
	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
		"run __nfsboot"

#ifdef CONFIG_FIT
#define CONFIG_BOOTFILE			"fitImage"
#define LINUXBOOT_ENV_SETTINGS \
	"fit_addr=0x00100000\0" \
	"fit_addr_r=0x84100000\0" \
	"fit_size=0x00f00000\0" \
	"norboot=setexpr fit_addr $nor_base + $fit_addr &&" \
		"bootm $fit_addr\0" \
	"nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \
		"bootm $fit_addr_r\0" \
	"tftpboot=tftpboot $fit_addr_r $bootfile &&" \
		"bootm $fit_addr_r\0" \
	"__nfsboot=run tftpboot\0"
#else
#ifdef CONFIG_ARM64
#define CONFIG_BOOTFILE			"Image.gz"
#define LINUXBOOT_CMD			"booti"
#define KERNEL_ADDR_LOAD		"kernel_addr_load=0x84200000\0"
#define KERNEL_ADDR_R			"kernel_addr_r=0x80080000\0"
#else
#define CONFIG_BOOTFILE			"zImage"
#define LINUXBOOT_CMD			"bootz"
#define KERNEL_ADDR_LOAD		"kernel_addr_load=0x80208000\0"
#define KERNEL_ADDR_R			"kernel_addr_r=0x80208000\0"
#endif
#define LINUXBOOT_ENV_SETTINGS \
	"fdt_addr=0x00100000\0" \
	"fdt_addr_r=0x84100000\0" \
	"fdt_size=0x00008000\0" \
	"kernel_addr=0x00200000\0" \
	KERNEL_ADDR_LOAD \
	KERNEL_ADDR_R \
	"kernel_size=0x00800000\0" \
	"ramdisk_addr=0x00a00000\0" \
	"ramdisk_addr_r=0x84a00000\0" \
	"ramdisk_size=0x00600000\0" \
	"ramdisk_file=rootfs.cpio.uboot\0" \
	"boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 && " \
		"if test $kernel_addr_load = $kernel_addr_r; then " \
			"true; " \
		"else " \
			"unzip $kernel_addr_load $kernel_addr_r; " \
		"fi && " \
		LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
	"norboot=setexpr kernel_addr_nor $nor_base + $kernel_addr && " \
		"setexpr kernel_size_div4 $kernel_size / 4 && " \
		"cp $kernel_addr_nor $kernel_addr_load $kernel_size_div4 && " \
		"setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \
		"setexpr fdt_addr_r $nor_base + $fdt_addr &&" \
		"run boot_common\0" \
	"nandboot=nand read $kernel_addr_load $kernel_addr $kernel_size && " \
		"nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
		"nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
		"run boot_common\0" \
	"tftpboot=tftpboot $kernel_addr_load $bootfile && " \
		"tftpboot $ramdisk_addr_r $ramdisk_file &&" \
		"tftpboot $fdt_addr_r $fdt_file &&" \
		"run boot_common\0" \
	"__nfsboot=tftpboot $kernel_addr_load $bootfile && " \
		"tftpboot $fdt_addr_r $fdt_file &&" \
		"setenv ramdisk_addr_r - &&" \
		"run boot_common\0"
#endif

#define	CONFIG_EXTRA_ENV_SETTINGS				\
	"netdev=eth0\0"						\
	"verify=n\0"						\
	"nor_base=0x42000000\0"					\
	"sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&"	\
		"tftpboot $tmp_addr u-boot-spl.bin &&"		\
		"setexpr tmp_addr $nor_base + 0x60000 &&"	\
		"tftpboot $tmp_addr u-boot.bin\0"		\
	"emmcupdate=mmcsetn &&"					\
		"mmc partconf $mmc_first_dev 0 1 1 &&"		\
		"tftpboot u-boot-spl.bin &&"			\
		"mmc write $loadaddr 0 80 &&"			\
		"tftpboot u-boot.bin &&"			\
		"mmc write $loadaddr 80 780\0"			\
	"nandupdate=nand erase 0 0x00100000 &&"			\
		"tftpboot u-boot-spl.bin &&"			\
		"nand write $loadaddr 0 0x00010000 &&"		\
		"tftpboot u-boot.bin &&"			\
		"nand write $loadaddr 0x00010000 0x000f0000\0"	\
	LINUXBOOT_ENV_SETTINGS

#define CONFIG_SYS_BOOTMAPSZ			0x20000000

#define CONFIG_SYS_SDRAM_BASE		0x80000000
#define CONFIG_NR_DRAM_BANKS		3
/* for LD20; the last 64 byte is used for dynamic DDR PHY training */
#define CONFIG_SYS_MEM_TOP_HIDE		64

#define CONFIG_PANIC_HANG

#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_TEXT_BASE)

/* only for SPL */
#if defined(CONFIG_ARM64)
#define CONFIG_SPL_TEXT_BASE		0x30000000
#elif defined(CONFIG_ARCH_UNIPHIER_SLD3) || \
	defined(CONFIG_ARCH_UNIPHIER_LD4) || \
	defined(CONFIG_ARCH_UNIPHIER_SLD8)
#define CONFIG_SPL_TEXT_BASE		0x00040000
#else
#define CONFIG_SPL_TEXT_BASE		0x00100000
#endif

#if defined(CONFIG_ARCH_UNIPHIER_LD11)
#define CONFIG_SPL_STACK		(0x30014c00)
#elif defined(CONFIG_ARCH_UNIPHIER_LD20)
#define CONFIG_SPL_STACK		(0x3001c000)
#else
#define CONFIG_SPL_STACK		(0x00100000)
#endif

#define CONFIG_SPL_FRAMEWORK
#ifdef CONFIG_ARM64
#define CONFIG_SPL_BOARD_LOAD_IMAGE
#endif

#define CONFIG_SPL_BOARD_INIT

#define CONFIG_SYS_NAND_U_BOOT_OFFS		0x10000

/* subtract sizeof(struct image_header) */
#define CONFIG_SYS_UBOOT_BASE			(0x60000 - 0x40)

#define CONFIG_SPL_TARGET			"u-boot-with-spl.bin"
#define CONFIG_SPL_MAX_FOOTPRINT		0x10000
#define CONFIG_SPL_MAX_SIZE			0x10000
#if defined(CONFIG_ARCH_UNIPHIER_LD11)
#define CONFIG_SPL_BSS_START_ADDR		0x30012000
#elif defined(CONFIG_ARCH_UNIPHIER_LD20)
#define CONFIG_SPL_BSS_START_ADDR		0x30016000
#endif
#define CONFIG_SPL_BSS_MAX_SIZE			0x2000

#endif /* __CONFIG_UNIPHIER_COMMON_H__ */
Commit	Line	Data
5894ca00	1	/*
e8a92932 MY	2	* Copyright (C) 2012-2015 Panasonic Corporation
	3	* Copyright (C) 2015-2016 Socionext Inc.
	4	* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
5894ca00 MY	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
a187559e	9	/* U-Boot - Common settings for UniPhier Family */
5894ca00 MY	10
	11	#ifndef __CONFIG_UNIPHIER_COMMON_H__
	12	#define __CONFIG_UNIPHIER_COMMON_H__
	13
928f3248	14	#define CONFIG_ARMV7_PSCI_1_0
e8a92932	15
233e42a9 MY	16	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
233e42a9 MY	17
99b85170 MY	18	#ifdef CONFIG_ARM64
	19	#define CONFIG_CMD_UNZIP
	20	#endif
	21
5894ca00 MY	22	/*-----------------------------------------------------------------------
	23	* MMU and Cache Setting
	24	----------------------------------------------------------------------/
	25
	26	/* Comment out the following to enable L1 cache */
	27	/* #define CONFIG_SYS_ICACHE_OFF */
	28	/* #define CONFIG_SYS_DCACHE_OFF */
	29
5894ca00 MY	30	#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
	31
	32	#define CONFIG_TIMESTAMP
	33
	34	/* FLASH related */
	35	#define CONFIG_MTD_DEVICE
	36
f1d9a9ed MY	37	#define CONFIG_SMC911X_32_BIT
	38	/* dummy: referenced by examples/standalone/smc911x_eeprom.c */
	39	#define CONFIG_SMC911X_BASE 0
	40
	41	#ifdef CONFIG_MICRO_SUPPORT_CARD
	42	#define CONFIG_SMC911X
	43	#else
f4c93a4f MY	44	#define CONFIG_SYS_NO_FLASH
f4c93a4f MY	45	#endif
5894ca00 MY	46
	47	#define CONFIG_FLASH_CFI_DRIVER
	48	#define CONFIG_SYS_FLASH_CFI
	49
	50	#define CONFIG_SYS_MAX_FLASH_SECT 256
	51	#define CONFIG_SYS_MONITOR_BASE 0
d085ecd6	52	#define CONFIG_SYS_MONITOR_LEN 0x00080000 /* 512KB */
5894ca00 MY	53	#define CONFIG_SYS_FLASH_BASE 0
	54
	55	/*
66deb91e	56	* flash_toggle does not work for our support card.
5894ca00 MY	57	* We need to use flash_status_poll.
	58	*/
	59	#define CONFIG_SYS_CFI_FLASH_STATUS_POLL
	60
	61	#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
	62
9879842c	63	#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
5894ca00 MY	64
	65	/* serial console configuration */
	66	#define CONFIG_BAUDRATE 115200
	67
5894ca00 MY	68	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	69
	70	#define CONFIG_CMDLINE_EDITING /* add command line history */
5894ca00 MY	71	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	72	/* Print Buffer Size */
	73	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	74	#define CONFIG_SYS_MAXARGS 16 /* max number of command */
	75	/* Boot Argument Buffer Size */
	76	#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
	77
	78	#define CONFIG_CONS_INDEX 1
	79
aa8a9348	80	/* #define CONFIG_ENV_IS_NOWHERE */
5894ca00	81	/* #define CONFIG_ENV_IS_IN_NAND */
aa8a9348 MY	82	#define CONFIG_ENV_IS_IN_MMC
aa8a9348 MY	83	#define CONFIG_ENV_OFFSET 0x80000
5894ca00	84	#define CONFIG_ENV_SIZE 0x2000
5894ca00 MY	85	/* #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
5894ca00 MY	86
aa8a9348 MY	87	#define CONFIG_SYS_MMC_ENV_DEV 0
	88	#define CONFIG_SYS_MMC_ENV_PART 1
	89
561ca649	90	#ifdef CONFIG_ARMV8_MULTIENTRY
50862a51	91	#define CPU_RELEASE_ADDR 0x80000000
9d0c2ceb MY	92	#define COUNTER_FREQUENCY 50000000
	93	#define CONFIG_GICV3
	94	#define GICD_BASE 0x5fe00000
667dbcd0 MY	95	#if defined(CONFIG_ARCH_UNIPHIER_LD11)
	96	#define GICR_BASE 0x5fe40000
	97	#elif defined(CONFIG_ARCH_UNIPHIER_LD20)
9d0c2ceb	98	#define GICR_BASE 0x5fe80000
667dbcd0	99	#endif
561ca649	100	#elif !defined(CONFIG_ARM64)
5894ca00 MY	101	/* Time clock 1MHz */
5894ca00 MY	102	#define CONFIG_SYS_TIMER_RATE 1000000
9d0c2ceb MY	103	#endif
9d0c2ceb MY	104
5894ca00 MY	105	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	106	#define CONFIG_SYS_NAND_MAX_CHIPS 2
	107	#define CONFIG_SYS_NAND_ONFI_DETECTION
	108
	109	#define CONFIG_NAND_DENALI_ECC_SIZE 1024
	110
ea65c980	111	#ifdef CONFIG_ARCH_UNIPHIER_SLD3
3365b4eb MY	112	#define CONFIG_SYS_NAND_REGS_BASE 0xf8100000
	113	#define CONFIG_SYS_NAND_DATA_BASE 0xf8000000
	114	#else
5894ca00 MY	115	#define CONFIG_SYS_NAND_REGS_BASE 0x68100000
5894ca00 MY	116	#define CONFIG_SYS_NAND_DATA_BASE 0x68000000
3365b4eb	117	#endif
5894ca00 MY	118
	119	#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_DATA_BASE + 0x10)
	120
	121	#define CONFIG_SYS_NAND_USE_FLASH_BBT
	122	#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
	123
495deb44	124	/* USB */
53c45d4e	125	#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 4
495deb44	126	#define CONFIG_FAT_WRITE
495deb44	127
4aceb3f8	128	/* SD/MMC */
a55d9fee	129	#define CONFIG_SUPPORT_EMMC_BOOT
4aceb3f8 MY	130	#define CONFIG_GENERIC_MMC
4aceb3f8 MY	131
5894ca00 MY	132	/* memtest works on */
	133	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
	134	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000)
	135
5894ca00 MY	136	/*
	137	* Network Configuration
	138	*/
5894ca00 MY	139	#define CONFIG_SERVERIP 192.168.11.1
	140	#define CONFIG_IPADDR 192.168.11.10
	141	#define CONFIG_GATEWAYIP 192.168.11.1
	142	#define CONFIG_NETMASK 255.255.255.0
	143
	144	#define CONFIG_LOADADDR 0x84000000
	145	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
5894ca00 MY	146
	147	#define CONFIG_CMDLINE_EDITING /* add command line history */
	148
	149	#define CONFIG_BOOTCOMMAND "run $bootmode"
	150
	151	#define CONFIG_ROOTPATH "/nfs/root/path"
	152	#define CONFIG_NFSBOOTCOMMAND \
	153	"setenv bootargs $bootargs root=/dev/nfs rw " \
	154	"nfsroot=$serverip:$rootpath " \
	155	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
d566f754	156	"run __nfsboot"
5894ca00	157
421376ae MY	158	#ifdef CONFIG_FIT
	159	#define CONFIG_BOOTFILE "fitImage"
	160	#define LINUXBOOT_ENV_SETTINGS \
	161	"fit_addr=0x00100000\0" \
	162	"fit_addr_r=0x84100000\0" \
	163	"fit_size=0x00f00000\0" \
5451b777	164	"norboot=setexpr fit_addr $nor_base + $fit_addr &&" \
421376ae	165	"bootm $fit_addr\0" \
5451b777	166	"nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \
e037db0c	167	"bootm $fit_addr_r\0" \
5451b777	168	"tftpboot=tftpboot $fit_addr_r $bootfile &&" \
d566f754 MY	169	"bootm $fit_addr_r\0" \
d566f754 MY	170	"__nfsboot=run tftpboot\0"
421376ae	171	#else
9d0c2ceb	172	#ifdef CONFIG_ARM64
99b85170	173	#define CONFIG_BOOTFILE "Image.gz"
9d0c2ceb	174	#define LINUXBOOT_CMD "booti"
99b85170	175	#define KERNEL_ADDR_LOAD "kernel_addr_load=0x84200000\0"
9d0c2ceb	176	#define KERNEL_ADDR_R "kernel_addr_r=0x80080000\0"
9d0c2ceb	177	#else
89835b35	178	#define CONFIG_BOOTFILE "zImage"
9d0c2ceb	179	#define LINUXBOOT_CMD "bootz"
99b85170	180	#define KERNEL_ADDR_LOAD "kernel_addr_load=0x80208000\0"
9d0c2ceb	181	#define KERNEL_ADDR_R "kernel_addr_r=0x80208000\0"
9d0c2ceb	182	#endif
421376ae MY	183	#define LINUXBOOT_ENV_SETTINGS \
	184	"fdt_addr=0x00100000\0" \
	185	"fdt_addr_r=0x84100000\0" \
	186	"fdt_size=0x00008000\0" \
	187	"kernel_addr=0x00200000\0" \
99b85170	188	KERNEL_ADDR_LOAD \
9d0c2ceb	189	KERNEL_ADDR_R \
99b85170 MY	190	"kernel_size=0x00800000\0" \
99b85170 MY	191	"ramdisk_addr=0x00a00000\0" \
421376ae MY	192	"ramdisk_addr_r=0x84a00000\0" \
421376ae MY	193	"ramdisk_size=0x00600000\0" \
e037db0c	194	"ramdisk_file=rootfs.cpio.uboot\0" \
99b85170 MY	195	"boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 && " \
	196	"if test $kernel_addr_load = $kernel_addr_r; then " \
	197	"true; " \
	198	"else " \
	199	"unzip $kernel_addr_load $kernel_addr_r; " \
	200	"fi && " \
9d0c2ceb	201	LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
99b85170 MY	202	"norboot=setexpr kernel_addr_nor $nor_base + $kernel_addr && " \
	203	"setexpr kernel_size_div4 $kernel_size / 4 && " \
	204	"cp $kernel_addr_nor $kernel_addr_load $kernel_size_div4 && " \
cd5d9565 MY	205	"setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \
	206	"setexpr fdt_addr_r $nor_base + $fdt_addr &&" \
	207	"run boot_common\0" \
99b85170	208	"nandboot=nand read $kernel_addr_load $kernel_addr $kernel_size && " \
421376ae MY	209	"nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
421376ae MY	210	"nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
cd5d9565	211	"run boot_common\0" \
99b85170	212	"tftpboot=tftpboot $kernel_addr_load $bootfile && " \
e037db0c MY	213	"tftpboot $ramdisk_addr_r $ramdisk_file &&" \
e037db0c MY	214	"tftpboot $fdt_addr_r $fdt_file &&" \
d566f754	215	"run boot_common\0" \
99b85170	216	"__nfsboot=tftpboot $kernel_addr_load $bootfile && " \
d566f754 MY	217	"tftpboot $fdt_addr_r $fdt_file &&" \
d566f754 MY	218	"setenv ramdisk_addr_r - &&" \
cd5d9565	219	"run boot_common\0"
421376ae MY	220	#endif
	221
	222	#define CONFIG_EXTRA_ENV_SETTINGS \
	223	"netdev=eth0\0" \
	224	"verify=n\0" \
90a6e929	225	"nor_base=0x42000000\0" \
61a4f5bd MY	226	"sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&" \
	227	"tftpboot $tmp_addr u-boot-spl.bin &&" \
	228	"setexpr tmp_addr $nor_base + 0x60000 &&" \
	229	"tftpboot $tmp_addr u-boot.bin\0" \
c231c436 MY	230	"emmcupdate=mmcsetn &&" \
c231c436 MY	231	"mmc partconf $mmc_first_dev 0 1 1 &&" \
c231c436 MY	232	"tftpboot u-boot-spl.bin &&" \
c231c436 MY	233	"mmc write $loadaddr 0 80 &&" \
d085ecd6	234	"tftpboot u-boot.bin &&" \
c231c436	235	"mmc write $loadaddr 80 780\0" \
421376ae	236	"nandupdate=nand erase 0 0x00100000 &&" \
3cb9abc9	237	"tftpboot u-boot-spl.bin &&" \
421376ae	238	"nand write $loadaddr 0 0x00010000 &&" \
d085ecd6	239	"tftpboot u-boot.bin &&" \
421376ae	240	"nand write $loadaddr 0x00010000 0x000f0000\0" \
421376ae	241	LINUXBOOT_ENV_SETTINGS
5894ca00	242
17bd4a21 MY	243	#define CONFIG_SYS_BOOTMAPSZ 0x20000000
17bd4a21 MY	244
cf88affa	245	#define CONFIG_SYS_SDRAM_BASE 0x80000000
3e9952be	246	#define CONFIG_NR_DRAM_BANKS 3
23869698 MY	247	/* for LD20; the last 64 byte is used for dynamic DDR PHY training */
23869698 MY	248	#define CONFIG_SYS_MEM_TOP_HIDE 64
5894ca00	249
3e0cfaa0 MY	250	#define CONFIG_PANIC_HANG
	251
	252	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE)
	253
	254	/* only for SPL */
9d0c2ceb MY	255	#if defined(CONFIG_ARM64)
	256	#define CONFIG_SPL_TEXT_BASE 0x30000000
	257	#elif defined(CONFIG_ARCH_UNIPHIER_SLD3) \|\| \
	258	defined(CONFIG_ARCH_UNIPHIER_LD4) \|\| \
ea65c980	259	defined(CONFIG_ARCH_UNIPHIER_SLD8)
f5d0b9b2	260	#define CONFIG_SPL_TEXT_BASE 0x00040000
323d1f9d	261	#else
f5d0b9b2 MY	262	#define CONFIG_SPL_TEXT_BASE 0x00100000
	263	#endif
	264
667dbcd0 MY	265	#if defined(CONFIG_ARCH_UNIPHIER_LD11)
	266	#define CONFIG_SPL_STACK (0x30014c00)
	267	#elif defined(CONFIG_ARCH_UNIPHIER_LD20)
9d0c2ceb MY	268	#define CONFIG_SPL_STACK (0x3001c000)
9d0c2ceb MY	269	#else
755c7d9a	270	#define CONFIG_SPL_STACK (0x00100000)
9d0c2ceb	271	#endif
a286039b	272
5894ca00	273	#define CONFIG_SPL_FRAMEWORK
adb3928f MY	274	#ifdef CONFIG_ARM64
adb3928f MY	275	#define CONFIG_SPL_BOARD_LOAD_IMAGE
9d0c2ceb	276	#endif
5894ca00	277
5894ca00 MY	278	#define CONFIG_SPL_BOARD_INIT
	279
	280	#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x10000
cbbc2d80	281
d085ecd6 MY	282	/* subtract sizeof(struct image_header) */
d085ecd6 MY	283	#define CONFIG_SYS_UBOOT_BASE (0x60000 - 0x40)
5894ca00	284
d085ecd6	285	#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
6a3cffe8	286	#define CONFIG_SPL_MAX_FOOTPRINT 0x10000
86c3345a	287	#define CONFIG_SPL_MAX_SIZE 0x10000
667dbcd0 MY	288	#if defined(CONFIG_ARCH_UNIPHIER_LD11)
	289	#define CONFIG_SPL_BSS_START_ADDR 0x30012000
	290	#elif defined(CONFIG_ARCH_UNIPHIER_LD20)
9d0c2ceb	291	#define CONFIG_SPL_BSS_START_ADDR 0x30016000
667dbcd0	292	#endif
9d0c2ceb	293	#define CONFIG_SPL_BSS_MAX_SIZE 0x2000
6a3cffe8	294
5894ca00	295	#endif /* __CONFIG_UNIPHIER_COMMON_H__ */